Samsung 5 series, LE32B530P7WXXC, LE37B530P7WXXC, LE40B530P7WXXC, LE46B530P7WXXC User Manual

BN68-02362A-02

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country Customer Care Centre Web Site

AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com/at

BELGIUM

02 201 2418 www.samsung.com/be

www.samsung.com/be_fr

CZECH REPUBLIC

800 - SAMSUNG (800-726786) www.samsung.com/cz Distributor pro Českou republiku:

Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8

DENMARK 8 - SAMSUNG (7267864) www.samsung.com/dk EIRE 0818 717 100 www.samsung.com/ie

FINLAND 30 - 6227 515 www.samsung.com/ FRANCE 01 4863 0000 www.samsung.com/fr

GERMANY 01805 - SAMSUNG (7267864, € 0.14/Min) www.samsung.de HUNGARY 06 - 80 - SAMSUNG (7267864) www.samsung.com/hu ITALIA 800 - SAMSUNG (7267864) www.samsung.com/it LUXEMBURG 02 261 03 710 www.samsung.com/lu NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com/nl

NORWAY 3 - SAMSUNG (7267864) www.samsung.com/no

POLAND

0 801 1SAMSUNG(172678) 022 - 607 - 93 - 33

www.samsung.com/pl

PORTUGAL 808 20 - SAMSUNG (7267864) www.samsung.com/pt SLOVAKIA 0800 - SAMSUNG (7267864) www.samsung.com/sk SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com/se SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) www.samsung.com/ch

U.K 0845 SAMSUNG (7267864) www.samsung.com/uk TURKEY 444 77 11 www.samsung.com/tr BELARUS 810-800-500-55-500 -

ESTONIA 800-7267 www.samsung.com/ee LATVIA 8000-7267 www.samsung.com/lv LITHUANIA 8-800-77777 www.samsung.com/lt MOLDOVA 00-800-500-55-500 -

KAZAHSTAN 8-10-800-500-55-500 www.samsung.com/kz_ru KYRGYZSTAN 00-800-500-55-500 RUSSIA 8-800-555-55-55 www.samsung.ru TADJIKISTAN 8-10-800-500-55-500 -

UKRAINE 8-800-502-0000

www.samsung.com/ua www.samsung.com/ua_ru

UZBEKISTAN 8-10-800-500-55-500 www.samsung.com/kz_ru

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model Serial No.

BN68-02362A-01L09-Cover.indd 1 2009-10-07 ¿ÀÈÄ 4:04:58

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.

Digital TV Notice

1. Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital

terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C(MPEG2 and MPEG4 AAC) cableTV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.

2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-

C is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video on Demand) and so on, are not included in this specification. So, they cannot be workable at

this moment.

Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T

digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.

Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a

service and you may be required to agree to terms and conditions of their business.

Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some

cable service providers.

For more information, please contact your local Samsung customer care centre.

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen

Do not display a still image and partially still on the LCD panel for more than 2 hours as it can cause screen image retention.

This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and

contrast of the screen when displaying a still image.

Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

❑

●

English - 1

License

TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is

incorporated under license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Symbol

N O T

Note One-Touch Button TOOLS Button Press

❑

GENERAL INFORMATION

Viewing the Control Panel ....................................................2

Accessories ..........................................................................2

Viewing the Connection Panel ..............................................3

Remote Control ....................................................................5

Installing Batteries in the Remote Control ............................5

OPERATION

Viewing the menus ...............................................................6

Placing Your Television in Standby Mode .............................7

Plug & Play Feature..............................................................7

Viewing the Display ..............................................................8

CHANNEL CONTROL

Conguring the Channel Menu .............................................8

Managing Channels ...........................................................11

PICTURE CONTROL

Conguring the Picture Menu .............................................13

Using Your TV as a Computer (PC) Display .......................15

Setting up the TV with your PC ..........................................16

SOUND CONTROL

Conguring the Sound Menu ..............................................17

Selecting the Sound Mode .................................................18

■

SETUP

Conguring the Setup Menu ...............................................19

INPUT / SUPPORT

Conguring the Input Menu ................................................22

Conguring the Support Menu............................................22

ANYNET

Connecting Anynet+ Devices .............................................24

Setting Up Anynet+ .............................................................

Switching between Anynet+ Devices ..................................25

Recording ...........................................................................26

Listening through a Receiver (Home Theatre) ...................26

Troubleshooting for Anynet+ ...............................................

RECOMMENDATIONS FOR USE

Teletext Feature ..................................................................28

Installing the Stand .............................................................29

Installing the Wall Mount Kit ...............................................29

Using the Anti-Theft Kensington Lock ................................30

Securing the Installation Space ..........................................30

Securing the TV to the Wall ................................................31

Troubleshooting ..................................................................32

Specications .....................................................................35

■

CONTENTS

English

English - 2

GENERAL INFORMATION

Viewing the Control Panel

The product colour and shape may vary depending on the model.

You can use a button by pressing the side panel buttons.

SOURCE E: Toggles between all the available input sources. In the on-screen menu, use this button as you would use the

ENTERE button on the remote control.

MENU: Press to see an on-screen menu of your TV’s features.

3 Y

: Press to increase or decrease the volume.

In the on-screen menu, use the

buttons as you would use the ◄ and ► buttons on the remote control.

4 Z

: Press to change channels. In the on-screen menu, use the

buttons as you would use the ▼ and ▲ buttons

on the remote control.

5 P

(POWER): Press to turn the TV on and off.

SPEAKERS

REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV.

POWER INDICATOR: Blinks and turns off when the power is on and lights up in stand-by mode.

Accessories

(M4 X L16)

Remote Control &

Batteries (AAA x 2)

Stand Stand Screw X 4 Cleaning Cloth Cover-Bottom Power Cord

Owner’s Instructions

●

Warranty card

●

Safety Guide

●

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. Warranty card / Safety Guide (Not available in all locations)

The items colour and shape may vary depending on the model.

N N

N N N

766

English - 3

Viewing the Connection Panel

The product colour and shape may vary depending on the model.

Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable.

DIGITAL AUDIO OUT (OPTICAL)

Connects to a Digital Audio component such as a Home theatre receiver.

When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on the DVD / Blu-ray player or Cable / Satellite Box directly to an Amplier or Home Theatre, not the TV.

Connect to the video output jack on your PC.

ANT IN

Connects to an antenna or cable TV system.

PC / DVI AUDIO IN

Connect to the audio output jack on your PC. DVI audio outputs for external devices.

AUDIO OUT [R-AUDIO-L]

Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio in connectors on the Amplier or DVD Home Theatre.

KENSINGTON LOCK (depending on the model)

The Kensington Lock (optional) is a device used to physically x the system when used in a public place. If you want to use a locking device, contact the dealer where you purchased the TV

The location of the Kensington Lock may be different depending on its model.

HDMI IN 1(DVI), 2, 3

Connects to the HDMI jack of a device with an HDMI output.

No sound connection is needed for an HDMI to HDMI connection. Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter

(DVI to HDMI) for video connection and the PC / DVI AUDIO IN jacks for audio.

You can also use the ports to connect to a PC.

What is HDMI? ‘High Denition Multimedia interface’ allows the transmission of high denition digital video data and multiple channels of

digital audio.

The HDMI / DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital

Copy Protection) coding feature installed, and supports multi - channel digital audio.

N N N

–

– –

–

N N

1 2 43 5

0 9 8 7

[TV Side Panel]

[TV Rear Panel]

Power Input

English - 4

The TV may not output sound and pictures may be displayed with abnormal colour when DVD / Blu-ray player / Cable Boxes / Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 1(DVI) jack and the audio cables to the PC / DVI AUDIO IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player / Cable Box / Satellite receiver to conrm the HDMI version, then request a rmware update. HDMI cables that are not 1.3 may cause annoying icker or no screen display.

COMPONENT IN

Connect component video cables (optional) to component connector (P

R, PB, Y) on the rear of your set and the other ends

to corresponding component video out connectors on the DTV or DVD. If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)

and connect the DTV (or DVD) to component connector (P

R, PB, Y) on your set.

The P

R, PB and Y connectors on your component devices (DTV or DVD) are sometimes labelled Y, B-Y and R-Y or Y, Cb

and Cr.

Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.

EXT (RGB)

Connector

Input Output

Video Audio (L / R) RGB Video + Audio (L / R)

EXT O O O Only TV or DTV output is available.

Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

SERVICE

Connector for software upgrades.

AV IN [VIDEO] / [R-AUDIO-L]

Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder. Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the

A/V device.

COMMON INTERFACE Slot

When not inserting ‘CI CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen. The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in

about 2~3 minutes. If an error message is displayed, please contact your service provider

When the channel information configuration has finished, the message ‘Updating Completed’

is displayed, indicating that

the channel list is now updated.

You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your

hands since dropping the CI CARD may cause damage to it.

Insert the CI-Card in the direction marked on it. The place of the COMMON INTERFACE Slot may be different depending on its model. CAM is not supported in some countries and regions, check with your authorized dealer

–

– –



N N N N N

English - 5

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV. The performance of the remote control may be affected by bright light.

The product colour and shape may vary depending on the model.

POWER : Television Standby

button.

NUMERIC BUTTONS : Press to

change the channel.

FAV.CH : Used to display

Favourites Channel Lists on the

screen.

4 Y

: Press to increase or

decrease the volume.

SOURCE : Press to display and

select the available video sources.

INFO : Press to display information

on the TV screen.

TOOLS : Use to quickly select

frequently used functions.

CH LIST : Displays the Channel List

on screen.

COLOURS BUTTONS : Use these

buttons in the Channel list menus

etc.

DUAL : Sound effect selection

Use these buttons in the Anynet+

modes. (∏: This remote can

be used to control recording on

Samsung recorders with the

Anynet+ feature)

TV : Selects the TV mode directly.

PRE-CH : Enables you to return

to the previous channel you were watching.

MUTEM: Press to temporarily cut

off the sound.

P </P > : Press to change

channels.

MENU : Displays the main on-screen

GUIDE : Electronic Programme Guide

(EPG) display

(

RETURN : Returns to the previous menu

)

 UP▲/DOWN▼/LEFT◄/RIGHT►

/ ENTERE : Use to select on-screen

menu items and change menu values.

EXIT : Press to exit the menu.

P.SIZE : Picture size selection

SRS : SRS TS HD selection.

SUBT. : Digital subtitle display

AD : Audio Description selection.

Teletext Functions

5 0

: Teletext mode selection (LIST /

FLOF)

6 5

: Teletext reveal

7 4

: Teletext size selection

8 8

: Teletext store

Fastext topic selection

0 /

: Alternately select Teletext,

Double, or Mix.

# :

: Exit from the Teletext display

$ 1

: Teletext sub page

^ 2

: Teletext next page

: Teletext previous page

& 6

: Teletext index

( 9

: Teletext hold

a 7

: Teletext cancel

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the gure.

2. Install two AAA size batteries.

Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the

compartment.

Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the

remote control for a long time.

If the remote control doesn’t work, check the following:

Is the TV power on? Are the plus and minus ends of the batteries reversed? Are the batteries drained? Is there a power outage or is the power cord unplugged? Is there a special uorescent light or neon sign nearby?

N N N

●

English - 6

OPERATION

Viewing the menus

Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.

1. Press the MENU button. The main menu is displayed on the screen. Its left side has icons: Picture, Sound,

Channel , Setup, Input, Application, Support.

Press the ▲ or ▼ button to select one of the icons.

Press the ◄ or ► button to access the icon’s sub-menu.

Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER

button to enter items in the menu.

4. Press the ▲/▼/◄/► button to change the selected items.

Press the RETURN button to return to the previous menu.

Press the EXIT button to exit from the menu.

Using the remote control buttons

Button Operations Button Operations

Display the main on-screen menu.

▲/▼/◄/►/

ENTER

Move the cursor and select an item. Select the currently selected item.

Conrm the setting.

RUTURN

Return to the previous menu.

EXIT

Exit the on-screen menu.

Example: Setting the TV’s Brightness in the Picture Menu

Adjusting the Brightness to 80

1. Press the MENU button to display the menu.

Press the ENTER

button to select Picture.

3. Press the ▲ or ▼ button to select Brightness.

Press the ENTER

button.

5. Press the ◄ or ► button until the brightness becomes 80.

Press the ENTER

button.

Press the EXIT button to exit from the menu.



Mode   :Standard ►

Backlight : 7

Contrast : 95

Brightness : 45

Sharpness : 50

Colour : 50

Tint (G / R) : G50 / R50

Picture

Mode   :Standard ►

Backlight : 7

Contrast : 95

Brightness : 45

Sharpness : 50

Colour : 50

Tint (G / R) : G50 / R50

Picture

Backlight : 7 Contrast : 95

Brightness  :45  ►

Sharpness : 50

Colour : 50

Tint (G / R) : G50 / R50

Advanced Settings

Picture Options

Picture Reset

Picture

Move

Adjust

Enter

Return

Brightness

Move

Adjust

Enter

Return

Brightness

Mode   :Standard ►

Backlight : 7

Contrast : 95

Brightness : 45

Sharpness : 50

Colour : 50

Tint (G / R) : G50 / R50

Picture

English - 7

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER

button on the remote control.

The screen is turned off and a standby indicator appears on your set.

To switch your set back on, simply press the POWER

button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday

, for example). It is best to

unplug the set from the mains and aerial.

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

1. Press the POWER button on the remote control. The message You can set the menu language. is displayed.

Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER

button to conrm your choice.

3. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTER

button.

We recommend setting the TV to Home Use mode for the best picture in your home environment.

Store Demo mode is only intended for use in retail environments. If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the Volume

button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

Press the ENTER

button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTERE button to

conrm your choice.

5. Press the ▲ or ▼ button to select Air or Cable, then press the ENTER

button.

Air: Air antenna signal. Cable: Cable antenna signal.

Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER

button to select Start. Digital & Analogue: Digital and Analogue channels. Digital: Digital channels. Analogue: Analogue channels. When setting the antenna source to Cable, a step appears allowing you to set a value for the digital channel search. For

more information, refer to Channel→Auto

Store.

The channel search will start and end automatically. Press the ENTER

button at any time to interrupt the memorization process.

After all the available channels are stored, the message Set the Clock Mode. is displayed.

. Press the ENTER

button. Press the ▲ or ▼ button to select Auto, then Press the ENTERE button.

If you select Manual, Set current date and time is displayed.

If you have received a digital signal, the time will be set automatically. If not, select

Manual to set the clock. (refer to page

19)

8. The connection method to provide the best quality HD is offered. After conrming the method, press the ENTER

button.

9. The message Enjoy your TV! is displayed. When you have nished, press the ENTER

button.

If you want to reset this feature...

Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER

button.

2. Press the ENTER

button again to select Plug & Play.

3. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’. If you want to change PIN number, use the Change PIN function. (refer to page 21) The Plug & Play feature is only available in the TV mode.

N N N

N N

Plug & Play

You can set the menu language.

Menu Language : English ►

Enter

English - 8

Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.

Press the INFO button to viewing the information.

Press the INFO button on the remote control. The TV will display the channel, the type of sound, and the status of certain picture and sound settings.

▲, ▼: You can view other channel’s information. If you want to move to the currently

selected channel, press ENTER

button.

◄, ►: You can view the desired program’s information at the current channel.

Press the INFO button once more or wait approximately 10 seconds and the display disappears automatically.

CHANNEL CONTROL

ConguringtheChannelMenu

Country

The PIN number input screen appears. Enter your 4 digit PIN number.

Analogue Channel

You can change the country for analogue channels.

Digital Channel

You can change the country for digital channels.

Auto Store

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers.

If a channel is locked using the Child Lock function, the PIN input window appears.

Air / Cable

Antenna source to memorize

Digital & Analogue: Digital and Analogue channels. Digital: Digital channels. Analogue: Analogue channels.

When selecting Cable→‘Digital&Analogue’or‘Cable→Digital’

Provide a value to scan for cable channels.

SearchMode→Full/Network/Quick

Quick

Network ID: Displays the network identication code. Frequency: Displays the frequency for the channel. (Differs in each country) Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates.

– – – –

Scans for all channels with active broadcast stations and stores them in the TV’s memory.

If you want to stop Auto Store, press the

ENTERE button.

The Stop Auto Store? message will be displayed. Select Yes by pressing the ◄ or ► button, then press the

ENTERE button.

●

❑



❑



●

N N

Country    ►

Auto Store

Manual Store

Cable Search Option

Now & Next Guide

Full Guide

Default Guide

: Full Guide

Channel

DTV Air

abc1

18:00 ~ 6:00

18:11 Thu 6 Jan

Life On Venus Ave nue

Unclassif ied

No Detai ld Informa tion

INFO

English - 9

Manual Store

Scans for a channel manually and stores it in the TV’s memory. If a channel is locked using the Child Lock function, the PIN input window appears.

Digital Channel

Manual store for digital channels.

Digital Channel is only available in DTV mode. Channel: Set the Channel number using the ▲, ▼ or number (0~9) buttons. Frequency: Set the frequency using the number buttons. Bandwidth: Set the bandwidth using the ▲, ▼ or number (0~9) buttons.

When it has nished, channels are updated in the channel list.

Analogue Channel

Manual store for analogue channel.

Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9) buttons.

ColourSystem→Auto

/PAL/SECAM/NTSC4.43: Sets the colour system value using the ▲ or ▼ button.

SoundSystem→BG/DK/I/L: Sets the sound system value using the ▲ or ▼ button.

Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.

You can also select the channel number directly by pressing the number (0~9) buttons. If there is abnormal sound or no sound, reselect the sound standard required.

Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the frequency range until the rst channel or the channel that you selected is received on the screen.

Store (When you store the channel and associated programme number): Set to OK by pressing the

ENTERE button.

Channel mode

P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position

numbers from P00 to P99. You can select a channel by entering the position number in this mode. C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this

mode.

S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.

Cable Search Option (depending on the country)

Sets additional search options such as the frequency and symbol rate for cable network searches.

Frequency (Start ~ Stop): Displays the frequency for the channel. Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates.

Now & Next Guide / Full Guide

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available.

For detailed procedures on using Now & Next Guide and Full Guide, refer to the descriptions on page 10. You can also display the guide menu simply by pressing the GUIDE button. (To configure the Default Guide, refer to the

descriptions.)

Now & Next Guide

For the six channels indicated in the left-hand column, displays the Current programme and the Next programme information.

Full Guide

Displays the programme information as time ordered One hour segments. T

wo hours of programme information is displayed which

may be scrolled forwards or backwards in time.

❑

N N



●



●

N N

●

–

❑

●

❑

N O



English - 10

DefaultGuide→Now&NextGuide/FullGuide

You can decide whether to display either the Now & Next Guide or the Full Guide when the GUIDE button on the remote control is pressed.

Channel List

For detailed procedures on using the Channel List, refer to the ‘Managing Channels’ instructions.

You can select these options by simply pressing the CH LIST button on the remote control.

Channel Mode

When press the P >/< button, Channels will be switched within the selected channel list. Added Ch.

Channels will be switched within the memorized channel list.

Favourite Ch.

Channels will be switched within the favourite channel list.

Fine Tune

If the reception is clear, you do not have to ne tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to ne tune the channel manually.

Fine tuned channels that have been saved are marked with an asterisk ‘*’ on the right-hand side of the channel number in the channel banner.

To reset the ne-tuning, select Reset by pressing the ▲ or ▼ button and then press the ENTER

button.

Only Analogue TV channels can be ne tuned.

Using the Now & Next Guide / Full Guide

To... Then...

Watch a programme in the EPG list Select a programme by pressing the ▲, ▼, ◄, ► button. Exit the guide Press the blue button

If the next programme is selected, it is scheduled with the clock icon displayed. If the ENTER

button is pressed again, press the

◄, ► button to select Cancel Schedules, the scheduling is cancelled with the clock icon gone. View programme information Select a programme of your choice by pressing the ▲, ▼, ◄, ► button.

Then press the INFO button when the programme of your choice is highlighted.

The programme title is on the upper part of the screen centre.

Please click on INFO button for detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information. “...” will be appeared if the summary is long. Toggle between the Now & Next Guide and Full

Guide

Press the red button repeatedly.

In Full Guide Scrolls backwards quickly (24 hours). Scrolls forwards quickly (24 hours).

Press the green button repeatedly. Press the yellow button repeatedly.

❑



❑

N N

Now & Next Guide

DTV Cable 900 f tn 2:10 Tue 1 Jun Freshmen On Campus 2:00 - 2:30

No Detailed Information

Now Next

Mint Extra Loaded

Fresh 40 with Dynamite MC

The Distillery Smash Hits! Sunday

1 f tn

2 ITV Play

3 Kerrang! 4 Kiss 5 oneword 6 Smash Hits!

▼

Street Hypn..

Kisstory No Information

No Information

Watch

INFO

Information ■Full Guide ■ Exit

Full Guide

DTV Cable 900 f tn 2:10 Tue 1 Jun Freshmen On Campus 2:00 - 2:30

No Detailed Information

Today 2:00 - 3:00 3:00 - 4:00

Mint Extra Loaded

Fresh 40 with Dynamite MC

The Distillery Smash Hits! Sunday

1 f tn

2 ITV Play

3 Kerrang! 4 Kiss 5 oneword 6 Smash Hits!

▼

No Information

Freshmen O..

Watch

INFO

Information ■Now/Next ■ +24 Hours ■ Exit

English - 11

Managing Channels

Using this menu, you can Add / Delete or set Favourite channels and use the programme guide for digital broadcasts.

All Channels

Shows all currently available channels.

Added Channels

Shows all added channels.

Favourites

Shows all favourite channels.

To select the Favourites channels you have set up, press the FAV.CH button on the remote control.

Programmed

Shows all current reserved programmes.

Select a channel in the All Channels, Added Channels or Favourites screen by pressing the ▲ / ▼ buttons, and pressing the ENTER

button. Then you can watch the selected channel.

Using the Colour buttons with the Channel List

Red (Channel Type): Toggle between your TV, Radio, Data / Other and All. Green (Zoom): Enlarges or shrinks a channel number. Yellow (Select): Selects multiple channel lists. You can perform the add / delete, add to Favourites / delete from

Favourites, or lock / unlock function for multiple channels at the same time. Select the required channels and press the yellow button to set all the selected channels at the same time. The

mark appears to the left of the selected channels.

TOOLS (Tools): Displays the Delete (or Add), Add to Favourite (or Delete from Favourite), Lock (or Unlock), Timer Viewing, Edit Channel Name, Sort, Edit Channel Number, Select All (or Deselect All), Auto Store menu. (The

Options menus may differ depending on the situation.)

Channel Status Display Icons

: An analogue channel.

: A channel selected by pressing the yellow button.

: A channel set as a Favourite.

(

: A programme currently being broadcast.

: A locked channel.

)

: A reserved programme

Channel List Option Menu (in All Channels / Added Channels / Favourites)

Press the TOOLS button to use the option menu. Option menu items may differ depending on the channel status.

Add / Delete

You can delete or add a channel to display the channels you want.

All deleted channels will be shown on All Channels menu. A gray-coloured channel indicates the channel has been deleted.

The Add menu only appears for deleted channels. You can also delete a channel from the Added Channels or Favourite menu in the same

manner.

Add to Favourite / Delete from Favourite

You can set channels you watch frequently as favourites.

Press the TOOLS button to display the Tools menu. You can also set the add to (or delete from) Favourite by selecting Tools

→

AddtoFavourite(or Delete from Favourite).

The ‘

’ symbol will be displayed and the channel will be set as a favourite.

All favourite channels will be shown on Favourite menu.



– – –

–

●

N N



N N N N



N N

824 UKTV Gold 825 UKTV style

1 C --

2 C --

3 ♥ C --

4 C --

5 C --

6 C --

7 C --

Added Channels

All ■ Channel Type ■ Zoom ■ Select T Tools

824 UKTV Gold 825 UKTV style

1 C --

2 C --

3 ♥ C --

4 C --

5 C --

6 C --

7 C --

Added Channels

All ■ Channel Type ■ Zoom ■ Select T Tools

Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort

▼

English - 12

Lock / Unlock

You can lock a channel so that the channel cannot be selected and viewed. This function is available only when the Child Lock is set to On. (see page 21)

The PIN number input screen appears. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’. You can change the PIN, by selecting Change PIN from the menu.

The ‘

’ symbol will be displayed and the channel will be locked.

Timer Viewing

If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List;

even when you are watching another channel. To reserve a programme, set the current time rst. (See page 19)

Only memorized channels can be reserved. You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control. Reserving a programme will be shown in the Programmed menu.

Digital Programme Guide and Viewing Reservation

When a digital channel is selected, and you press the ► button, the Programme Guide for the channel appears.

You can

reserve a programme according to the procedures described above.

Edit Channel Name (analogue channels only)

Channels can labelled so that their call letters appear whenever the channel is selected.

The names of digital broadcasting channels are automatically assigned and cannot be labelled.

Edit Channel Number (digital channels only)

You can also edit the channel number by pressing the number buttons on the remote control.

Sort (analogue channels only)

This operation allows you to change the programme numbers of the stored channels.

This operation may be necessary after using

the auto store.

Select All / Deselect All

Select All: You can select all the channels in the channel list. Deselect All: You can deselect all the selected channels. You can only select Deselect All when there is a selected channel.

Auto Store

For further details on setting up options, refer to page 8. If a channel is locked using the Child Lock function, the PIN input window appears.

Channel List Option Menu (in Programmed )

You can view, modify or delete a reservation.

Press the TOOLS button to use the option menu.

Change Info

Select to change a viewing reservation.

Cancel Schedules

Select to cancel a viewing reservation.

Information

Select to view a viewing reservation. (You can also change the reservation information.)

Select All

Select all reserved programmes.



N N N



N N N N



●



N N



1 / 1 / 2009

13:59 5 TV1

Quincy, M.E

18:59 2 TV3

The Equalizer

20:59 2 TV3

McMillan & Wife

Programmed

All ■ Zoom ■ Select T Tools E Information

Change Info Cancel Schedules Information Select All

English - 13

PICTURE CONTROL

ConguringthePictureMenu

Mode

You can select the type of picture which best corresponds to your viewing requirements.

Press the TOOLS button to display the Tools menu. You can also set the picture mode by selecting Tools→PictureMode.

Dynamic

Selects the picture for high-denition in a bright room.

Standard

Selects the picture for the optimum display in a normal environment.

Movie

Selects the picture for viewing movies in a dark room.

Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)

Your television has several setting options that allow you to control the picture quality.

Backlight: Adjusts the brightness of LCD back light. Contrast: Adjusts the contrast level of the picture. Brightness: Adjusts the brightness level of the picture Sharpness: Adjusts the edge denition of the picture. Colour: Adjusts colour saturation of the picture. Tint (G/R): Adjusts the colour tint of the picture.

Select a picture mode to be adjusted rst. The adjusted values are saved for each picture mode. When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted

accordingly. In analogue TV, Ext., AV modes of the PAL system, you cannot use the Tint (G/R) Function.

In PC mode, you can only make changes to Backlight, Contrast and Brightness. Settings can be adjusted and stored for each external device you have connected to an input of the

TV.

The energy consumed during use can be signicantly reduced if the brightness level of the picture is reduced, which will

reduce the overall running cost.

Advanced Settings

Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed

picture settings.

Advanced Settings is available in Standard or Movie mode. In PC mode, you can only make changes to Gamma and White Balance from among the Advanced Settings items.

BlackTone→Off/Dark/Darker/Darkest

You can select the black level on the screen to adjust the screen depth.

DynamicContrast→Off/Low/Medium/High

You can adjust the screen contrast so that the optimal contrast is provided.

Gamma

You can adjust the Primary Colour (Red, Green, Blue) Intensity.

Colour Space

Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite Colour Space to experience the

most natural colour.

Native: Native Colour Space offers deep and rich colour tone. Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources.

❑



❑

●

N N

N N N N

❑

N N



●

Mode  :Standard  ►

Backlight : 7

Contrast : 95

Brightness : 45

Sharpness : 50

Colour : 50

Tint (G / R) : G50 / R50

Picture

Colour : 50

Tint (G / R) : G50 / R50

AdvancedSettings  ►

Picture Options

Picture Reset

Picture

English - 14

White Balance

You can adjust the colour temperature for more natural picture colours.

R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: You can adjust the Colour ‘temperature’ in the light areas by

changing the values of R, G, B. Recommended for advanced users only.

Reset: The previously adjusted white balance will be reset to the factory defaults.

Flesh Tone

You can emphasize the pink ‘esh tone’ in the picture.

Changing the adjustment value will refresh the adjusted screen.

EdgeEnhancement→Off/On

You can emphasize object boundaries in the picture.

Picture Options

In PC mode, you can only make changes to the Colour Tone and Size from among the items in Picture Options.

ColourTone→Cool/Normal/Warm1/Warm2

You can select the most comfortable colour tone to your eyes.

Settings can be adjusted and stored for each external device you have connected to an input of the

TV.

Warm1 or Warm2 is only activated when the picture mode is Movie.

Size

You can select the picture size which best corresponds to your viewing requirements.

Press the TOOLS button to display the Tools menu. You can also set the size by selecting Tools→PictureSize. You can select these options by simply pressing the P.SIZE button on the remote control.

Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio. 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnies the 16:9 wide picture (in the vertical direction) to t the screen size. 4:3: This is the default setting for a video movie or normal broadcasting. Screen Fit: Use the function to see the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i

/ 1080p) signals are input. Depending on the input source, the picture size options may vary. The items available may differ depending on the selected mode. In PC Mode, only 16:9 and 4:3 mode can be adjusted. Settings can be adjusted and stored for each external device you have connected to an input of the

TV.

Temporary image retention may occur when viewing a static image on the set for more than two hours. Wide Zoom: Press the ► button to Select Position, then press the ENTER

button. Press the ▲ or ▼ button to move the

picture up / down. Then press the ENTERE button. Zoom: Press the ► button to Select Position, then press the ENTER

button. Press the ▲ or ▼ button to move the picture

up and down. Then press the ENTERE button. Press the ► button to Select Size, then press the ENTERE button. Press

the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTERE button. After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing the ◄ or ►

button. Use the ▲, ▼, ◄ or ► button to move the picture.

Reset: Press the ◄ or ► button to select Reset, then press the ENTERE button. You can initialize the setting. If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the Overscan

function.

ScreenMode→16:9/WideZoom/Zoom/4:3

When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires dif

ferent picture size so this function is

intended for users to select it.

16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnify the size of the picture vertically on screen. 4:3: Sets the picture to 4:3 normal mode.

This function is available in Auto Wide mode. This function is not available in PC, Component or HDMI mode.



●



❑



N N



●

N N N N N N



●

N N

English - 15

DigitalNR→Off/Low/Medium/High/Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static

and ghosting that may appear on the screen.

When the signal is weak, select one of the other options until the best picture is displayed.

HDMIBlackLevel→Normal/Low

You can directly select the black level on the screen to adjust the screen depth.

This function is active only when the external input connects to HDMI (RGB signals).

FilmMode→Off/Auto

The TV can be set to automatically sense and process lm signals from all sources and adjust the picture for optimum quality.

Film Mode is supported in TV, AV, COMPONENT(480i / 1080i) and HDMI(480i / 1080i).

PictureReset→ResetPictureMode/Cancel

Resets all picture settings to the default values.

Select a picture mode to be reset. The reset is performed for each picture mode. Reset Picture Mode: Current picture values return to default settings.



❑

●

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1. First, click on ‘Control Panel’ on the Windows start menu.

When the control panel window appears, click on ‘Appearance and Themes’

and a display dialog-box will appear.

3. When the control panel window appears, click on ‘Display’ and a display dialogbox will appear.

Navigate to the ‘Settings’ tab on the display dialog-box.

The correct size setting (resolution): Optimum-1920 X 1080 pixels If a vertical-frequency option exists on your display settings dialog box, the correct value is ‘60’

or ‘60 Hz’. Otherwise, just click

‘OK’ and exit the dialog box.

English - 16

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are

recommended.

D-Sub and HDMI/DVI Input

Mode Resolution

Horizontal Frequency

(KHz)

Vertical Frequency

(Hz)

Pixel Clock Frequency

(MHz)

Sync Polarity

(H / V)

IBM 640 x 350 31.469 70.086 25.175 +/-

720 x 400 31.469 70.087 28.322 -/+

MAC 640 x 480 35.000 66.667 30.240 -/-

832 x 624 49.726 74.551 57.284 -/-

1152 x 870 68.681 75.062 100.000 -/-

VESA CVT 720 x 576 35.910 59.950 32.750 -/+

1152 x 864 53.783 59.959 81.750 -/+ 1280 x 720 44.772 59.855 74.500 -/+ 1280 x 960 75.231 74.857 130.000 -/+ 1280 x 720 56.456 74.777 95.750 -/+

VESA DMT 640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.861 72.809 31.500 -/- 640 x 480 37.500 75.000 31.500 -/- 800 x 600 37.879 60.317 40.000 +/+ 800 x 600 48.077 72.188 50.000 +/+

800 x 600 46.875 75.000 49.500 +/+ 1024 x 768 48.363 60.004 65.000 -/- 1024 x 768 56.476 70.069 75.000 -/- 1024 x 768 60.023 75.029 78.750 +/+ 1152 x 864 67.500 75.000 108.000 +/+

1280 x 1024 63.981 60.020 108.000 +/+ 1280 x 1024 79.976 75.025 135.000 +/+

1280 x 800 49.702 59.810 83.500 -/+ 1280 x 800 62.795 74.934 106.500 -/+ 1280 x 960 60.000 60.000 108.000 +/+ 1360 x 768 47.712 60.015 85.500 +/+

1440 x 900 55.935 59.887 106.500 -/+ 1440 x 900 70.635 74.984 136.750 -/+

1680 x 1050 65.290 59.954 146.250 -/+

VESA GTF 1280 x 720 52.500 70.000 89.040 -/+

1280 x 1024 74.620 70.000 128.943 -/-

VESA DMT /

DTV CEA

1920 x 1080p 67.500 60.000 148.500 +/+

When using an HDMI / DVI cable connection, you must use the HDMI IN 1(DVI) jack.

The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected. Separate and Composite modes are supported. SOG is not supported. Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080 or 1600x1200).

Setting up the TV with your PC

Preset: Press the SOURCE button to select PC mode.

Auto Adjustment

Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of ne, coarse and position are adjusted automatically.

This function does not work in DVI-HDMI mode. Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment

by selecting Tools→Auto

Adjustment.

Screen

Coarse / Fine

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture

so that it is aligned on the centre of screen.

PC Position

Adjust the PC’s screen positioning if it does not t the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.

Image Reset

You can replace all image settings with the factory default values.



N N N N N

❑



Brightness : : 45

Sharpness : 50

AutoAdjustment   ►

Screen

Advanced Settings

Picture Options

Picture Reset

Picture

English - 17

SOUND CONTROL

ConguringtheSoundMenu

Mode→Standard/Music/Movie/ClearVoice/Custom

You can select a sound mode to suit your personal preferences.

Press the TOOLS button to display the Tools menu. You can also congure the sound

mode by selecting Tools → Sound Mode.

Standard

Selects the normal sound mode.

Music

Emphasizes music over voices.

Movie

Provides the best sound for movies.

Clear Voice

Emphasizes voice over other sounds.

Custom

Recalls your customized sound settings.

Equalizer

The sound settings can be adjusted to suit your personal preferences.

Mode

You can select a sound mode to suit your personal preferences.

Balance

Controls the balance between the right and left speakers.

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment)

To adjust the level of different bandwidth frequencies

Reset

Resets the equalizer settings to the default values.

SRSTruSurroundHD→Off/On

SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

Press the SRS button on the remote control to select Off or On.

Audio Language (digital channels only)

You can change the default value for audio languages. Displays the language information for the incoming stream.

You can only select the language among the actual languages being broadcast. While viewing a digital channel, this function can be selected.

AudioFormat→MPEG/DolbyDigital (digital channels only)

When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.

The Audio Format appears according to the broadcasting signal. While viewing a digital channel, this function can be selected.

Audio Description (digital channels only)

This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control the volume.

Press the AD button on the remote control to select Off or On.

❑



❑



❑

N N

❑

N N

❑

Mode   :Custom ►

Equalizer

SRS TruSurround HD : Off

Audio Language : - - -

Audio Format : - - -

Audio Description

Auto V

olume : Off

Sound

English - 18

AudioDescription→Off/On

Turn the audio description function on or off.

Volume

You can adjust the audio description volume.

Volume is active when Audio Description is set to On.

AutoVolume→Off/On

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

SpeakerSelect→ExternalSpeaker/TVSpeaker

If you want to hear the sound through separate speakers, cancel the internal amplier.

The volume and MUTE buttons do not operate when the Speaker Select is set to External Speaker. If you select External Speaker in the Speaker Select menu, the sound settings will be limited.

SoundReset→ResetAll/ResetSoundMode/Cancel

You can restore the Sound settings to the factory defaults.

Selecting the Sound Mode

You can set the sound mode by pressing the DUAL button. When you press it, the current sound mode is displayed on the screen.

Audio Type Dual 1 / 2 Default

A2 Stereo

Mono MONO

Automatic change

Stereo STEREO↔MONO

Dual DUAL

1↔DUAL2 DUAL 1

NICAM

Stereo

Mono MONO

Automatic change

Stereo MONO↔STEREO

Dual

MONO↔DUAL

1

DUAL 2

DUAL 1

If the stereo signal is weak and an automatic switching occurs, then switch to the mono.

This function is only activated in stereo sound signal. It is deactivated in mono sound signal.

This function is only available in TV mode.



❑

N N

❑

N N N

English - 19

SETUP

ConguringtheSetupMenu

Menu Language

You can set the menu language.

Time

Clock

Setting the clock is necessary in order to use the various timer features of the TV

The current time will appear every time you press the INFO button. If you disconnect the power cord, you have to set the clock again.

Clock Mode

You can set up the current time manually or automatically.

Auto: Set the current time automatically using the time from the digital broadcast. Manual: Set the current time to a manually specied time.

Depending on the broadcast station and signal, the auto time may not be set correctly

. If this occurs, set the time

manually.

The Antenna or cable must be connected in order to set the time automatically.

Clock Set

You can set the current time manually.

Set up this item when you have set Clock Mode to Manual.

You can set the day, month, year, hour and minute directly by pressing the number buttons on the remote control.

SleepTimer→Off/30min/60min/90min/120min/150min/180min

The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).

The TV automatically switches to standby mode when the timer reaches 0.

To cancel the Sleep Timer function, select Off. Press the TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools→SleepTimer.

Timer 1 / Timer 2 / Timer 3

Three different on / off timer settings can be made. You must set the clock rst.

On Time: Set the hour, minute, and activate / inactivate. (To activate the timer with the setting you’ve chosen, set to Activate.) Off Time: Set the hour, minute, and activate / inactivate. (To activate the timer with the setting you’ve chosen, set to Activate.) Volume: Select the desired turn on volume level. Antenna: Select Air or Cable. Channel: Select the desired channel. Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.

When Manual is selected, press the ► button to select the desired day of the week. Press the ENTER

button over the

desired day and the c mark will appear.

You can set the hour, minute and channel by pressing the number buttons on the remote control.

Auto Power Off

When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the

TV was

turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is

on for too long time.

❑



N N

●

– –

●

N N



N N



●

N N

Plug & Play

MenuLanguage :English ►

Time

Broadcast

Security

General

Setup

English - 20

Broadcast

Subtitle You can activate and deactivate the subtitles. Use this menu to set the Subtitle Mode. Normal under the menu is the basic subtitle

and Hard of hearing is the subtitle for a hearing-impaired person.

Subtitle→Off/On : Switches subtitles on or off. Mode→Normal/Hardofhearing: Sets the subtitle mode.

Subtitle Language: Set the subtitle language.

If the programme you are watching does not support the Hard of hearing function, Normal automatically activates even though Hard of hearing mode is selected.

English is the default in cases where the selected language is unavailable in the broadcast. You can select these options simply by pressing the SUBT. button on the remote control.

DigitalText→Disable/Enable (UK only)

If the programme is broadcast with digital text, this feature is enabled.

MHEG (Multimedia and Hypermedia Information Coding Experts Group)

An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the

MPEG system which includes data-linking hypermedia such as still images, character service, animation, graphic and video les as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various elds including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing, digital libraries and network games.

Teletext Language

You can set the Teletext language by selecting the language type.

English is the default in cases where the selected language is unavailable in the broadcast.

Preference

Primary Audio Language / Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language / Primary Teletext Language / Secondary Teletext Language

Using this feature, users can select one of the languages. The language selected here is the default when the user selects a channel.

If you change the language setting, the Subtitle Language, Audio Language, and the Teletext Language of the Language

menu are automatically changed to the selected language.

The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a list of languages supported by the current channel and the selection is highlighted. If you change this language setting, the new selection is only valid for the current channel. The changed setting does not change the setting of the Primary Subtitle Language, Primary

Audio Language, or the Primary Teletext Language of the Preference menu.

Common Interface

CI Menu

This enables the user to select from the CAM-provided menu. Select the CI Menu based on the menu PC Card.

Application Info.

This contains information on CAM inserted in the CI slot and displays it.

The Application Info inserting is about the ‘CI CARD’. You can install the CAM anytime whether the TV is ON or OFF.

1. Purchase the CI CAM module by visiting your nearest dealer or by phone.

2. Insert the ‘CI CARD’ into the CAM in the direction of the arrow until it ts.

3. Insert the CAM with the ‘CI CARD’ installed into the common interface slot.

(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)

4. Check if you can see a picture on a scrambled signal channel. CAM is not supported in some countries and regions, check with your authorized dealer

❑



●

N N



●



●

English - 21

Security

Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’. You can change the PIN by selecting Change PIN from the menu.

ChildLock→Off/On

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by muting out video

and audio.

You can lock some channels in Channel List. (refer to page 12)

Child Lock is available only in TV mode.

Parental Lock

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by a 4-digit PIN (Personal Identication Number) code that is dened by the user.

The Parental Lock item differs depending on the country. When the Parental Lock is set, the ‘

’ symbol is displayed.

Allow All: Press to unlock all TV ratings. Block All: Press to lock all TV ratings.

Change PIN

You can change your personal ID number that is required to set up the TV.

If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to ‘0-0-0-0’:

POWER(Off) → MUTE → 8 → 2 → 4 → POWER(On).

General

GameMode→Off/On

When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by

selecting the game menu.

To disconnect the game console and connect another external device, cancel game mode in the setup menu.

If you display the TV menu in Game Mode, the screen shakes slightly. Game Mode is not available in regular TV and PC mode. If Game Mode is On:

Picture mode is automatically changed to Standard and users cannot change the mode. Sound mode is automatically changed to Custom and users cannot change the mode. Adjust the sound using the

equalizer.

The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer settings to

the factory defaults.

EnergySaving→Off/Low/Medium/High/PictureOff/Auto

This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the Energy Saving mode option to High to reduce eye fatigue as well as power consumption.

If you select Picture Off, the screen is turned off and you can only hear the sound. Press any button to get out of Picture Off.

In the Tools menu, Picture Off function is not supported. Press the TOOLS button to display the Tools menu. You can also set the Energy Saving option by selecting Tools → Energy

Saving.

Melody→Off/Low/Medium/High

A melody sound can be set to come on when the TV is powered On or Off.

The Melody does not play

When no sound is output from the TV because the MUTE button has been pressed. When no sound is output from the TV because the (–) Volume button has been pressed. When the TV is turned off by Sleep Timer function.

❑

N N



N N



N N N



❑



N N N N

– –



– – –

English - 22

INPUT / SUPPORT

ConguringtheInputMenu

Source List

Use to select TV or other external input sources such as DVD / Blu-ray players / Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice.

Press the SOURCE button on the remote control to view an external signal source. TV mode can be selected by pressing the TV button.

TV / Ext. / AV / Component / PC / HDMI1/DVI / HDMI2 / HDMI3.

You can choose only those external devices that are connected to the TV. In the Source List, connected inputs will be highlighted and sorted to the top. Inputs that are not

connected will be sorted to the bottom.

Ext. and PC Always stays activated.

Using the Colour buttons on the remote with the Source list

Red (Refresh): Refreshes the connecting external devices. TOOLS (Tools): Displays the Edit Name and Information menus.

Edit Name

Name the device connected to the input jacks to make your input source selection easier.

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI / DVI PC / TV / IPTV / Blu-ray / HD DVD / DMA

When a PC with a resolution of 1920 x 1080 @ 60Hz is connected to the HDMI IN 1(DVI) port, you should set the HDMI1 mode to DVI PC in the Edit Name of the Input mode.

When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set the HDMI1/DVI mode to DVI or DVI PC in the Edit Name of the Input mode. In this case, a separate sound connection is required.

ConguringtheSupportMenu

Self Diagnosis

Picture Test

If you think you have a picture problem, perform the picture test. Check the colour pattern on the screen to see if the problem still exists.

Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung’s call centre for assistance.

No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external device’s user manual.

Sound Test

If you think you have a sound problem, please perform the sound test. Y

ou can check the sound by playing a built-in melody sound

through the TV. ‘Does the problem still exist with this sound test?’ appears on the screen.

If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV speaker

in the Sound menu. The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing

the MUTE button.

Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with the TV. Contact Samsung’s call centre for assistance.

No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external device’s user manual.

Signal Information (digital channels only)

Unlike analogue channels, which can vary in reception quality from ‘snowy’ to clear

, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analogue channels, you cannot ne tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels.

If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you nd the best position with the strongest signal.

❑



N N

– –

❑



❑



●



●



Source List

Edit Name

Input

SelfDiagnosis   ►

Software Upgrade

HD Connection Guide

Contact Samsung

Support

English - 23

Software Upgrade

To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as part of the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You are given the option to install the

upgrade.

BY USB

Insert a USB drive containing the rmware upgrade into TV. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied.

The TV will turn off and turn on automatically after completing the rmware upgrade. Please check the rmware version after the update is completed. When software is upgraded, video and audio settings you have made will return to their default (factory) settings.

We recommend you write down your settings so that you can easily reset them after the upgrade.

BY Channel

Upgrades the software using the broadcasting signal.

If the function is selected during the software transmission period, this function searches for available software and downloads

the software.

The time required to download the software is determined by the signal status.

Standby Mode Upgrade

To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button. 45 minutes after entering standby mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally

, the screen may be on

slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is completed.

Alternative Software

To display the software version information.

HD Connection Guide

This menu presents the connection method that provides the optimal quality for the HD TV. Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can view the information regarding the call centre, product and software le download method.

❑



❑

TV Rear Panel

USB Drive

English - 24

ANYNET

Connecting Anynet+ Devices

Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.

The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has

this feature, check if there is an Anynet+ logo on it.

To connect to a TV

1. Connect the HDMI IN (1(DVI), 2 or 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an

HDMI cable.

To connect to Home Theatre

1. Connect the HDMI IN (1(DVI), 2 or 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an

HDMI cable.

2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI

cable. Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the

Home Theatre.

When following the connection above, the Optical jack only outputs 2 channel audio.

You will only hear sound from the Home

Theatre’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Blu-ray player or Cable/Satellite Box (ie Anynet Device 1 or 2) directly to the Ampli er or Home Theatre, not the TV.

Connect only one Home Theatre. You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions. Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status. Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.

N N N N

Optical Cable

Home Theatre

HDMI 1.3 Cable

Anynet+ Device 1

HDMI 1.3 Cable

Anynet+ Device 2

Anynet+ Device 3

HDMI 1.3 Cable

HDMI 1.3

Cable

Anynet+ Device 1

HDMI 1.3 Cable

Anynet+ Device 2 Anynet+ Device 3

HDMI 1.3 Cable

English - 25

Setting Up Anynet

Press the TOOLS button to display the Tools menu. You can also display Anynet+ menu by selecting Tools→Anynet+(HDMI-CEC).

Setup

Anynet+(HDMI-CEC)

→

Off / On

To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.

When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations

are deactivated.

AutoTurnOff→No/Y

Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off

The active source on the TV remote must be set to TV to use the Anynet+ function.

If you set Auto Turn Off to Yes, connected external devices are also turned off when the

TV is turned off. If an external device is still recording, it may or may not turn off.

Switching between Anynet+ Devices

1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).

2. Press the ▲ or ▼ button to select Device List, then press the ENTER

button

Anynet+ devices connected to the TV are listed. If you cannot nd a device you want,

press the red button to scan for devices. Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, the Device List

menu appears.

Press the ▲ or ▼ button to select a particular device and press the ENTER

button. It

is switched to the selected device.

Switching to the selected devices may take up to 2 minutes. You cannot cancel the

operation during the switching operation.

The time required to scan for devices is determined by the number of connected devices. When the device scan is complete, the number of devices found are not displayed. Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to

the TV when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to

search for the connected device.

If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to

switch to an Anynet+ device by using the Device List.

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

Anynet+ Menu Description View TV Anynet+ mode changes to TV broadcast mode. Device List Shows the Anynet+ device list.

(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the

DVD recorder will appear.

(device_name) Operation Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play

menu of the DVD recorder will appear.

Record: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that support the

recording function.)

Stop Recording: (*recorder) Stops recording. Receiver Sound is played through the receiver.

If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).

❑



N N

N N N

View TV

Device List

Record :

DVDR DVDR MENU DVDR Operation Receiver

: On

Setup

Move

Enter

Return

Device List

Setup

Move

Enter

Return

Setup

Anynet+ (HDMI-CEC) : On

Auto Turn Off : Yes

Move

Enter

Return

Anynet+(HDMI-CEC)  ►

Application

English - 26

TV Remote Control Buttons Available in Anynet+ Mode

Device Type Operating Status Available Buttons

Anynet+ Device

After switching to the device, when the menu of the corresponding device is displayed on the screen.

Numeric buttons ▲/▼/◄/►/ENTER

buttons

Colour buttons / EXIT button

After switching to the device, while playing

a le

(Backward search) / µ(Forward search) / ∫(Stop) /

∂

(Play) / ∑(Pause)

Device with built-

in Tuner

After switching to the device, when you

are watching a TV programme

/ P < button

Audio Device When Receiver is activated Volume / MUTE button

The Anynet+ function only works when the active source on the TV remote control is set to TV. The

∏

button works only while in the recordable state.

You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control.

The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.

The Anynet+ functions do not operate with other manufacturers’ products. The

π, µ

operations may differ depending on the device.

Recording

You can make a recording of a TV programme using a Samsung recorder.

1. Press the TOOLS button. Press the ENTER

button to select Anynet+ (HDMI-CEC).

2. Press the ▲ or ▼ button to select Record: (device_name), then press the ENTER

button. Recording begins.

When there is more than one recording device

When multiple recording devices are connected, the recording devices are listed. Press the ▲ or ▼ button to select a recording device and press the ENTER

button. Recording begins.

When the recording device is not displayed Select Device List and press the red button to search devices.

Press the EXIT button to exit.

You can record the source streams by selecting Record: (device_name).

Pressing the

∫

button will record whatever you are currently watching. If you are watching video from another device, the

video from the device is recorded.

Before recording, check whether the antenna jack is properly connected to the recording device.

To properly connect an

antenna to a recording device, refer to the recording device’s users manual.

Listening through a Receiver (Home Theatre)

You can listen to sound through a receiver instead of the TV speaker.

1. Press the TOOLS button. Press the ENTER

button to select Anynet+ (HDMI-CEC).

2. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.

Press the EXIT button to exit.

If your receiver supports audio only, it may not appear in the device list. The receiver will work when you have properly connected the optical in jack of the receiver to the

DIGITAL AUDIO OUT (OPTICAL) jack of the TV. When the Home Theatre receiver is set to On, you can hear sound output from the TV’s Optical jack. When the TV is

displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theatre receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theatre

receiver. If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure),

the Speaker Select may be set to External Speaker when you turn the TV on again. (see page 18)

N N N

N N

View TV

Device List

Record :

DVDR

DVDR MENU DVDR Operation Receiver

: On

Setup

Move

Enter

Return

English - 27

Troubleshooting for Anynet

Problem Possible Solution

Anynet+ does not work. Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.

Connect only one receiver (home theatre). Check if the Anynet+ device power cord is properly connected. Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Check whether the TV remote control is in TV mode. Check whether it is Anynet+ exclusive remote control.

Anynet+ doesn’t work in certain situations. (Searching channels, Operating Plug & Play, etc.)

When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or turn your TV off and on again.

Check if the Anynet+ Function of Anynet+ device is set on.

●

I want to start Anynet+. Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-

CEC) is set to On in the Anynet+ Setup menu.

Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to show the Anynet+ menu and select a menu you want.

●

I want to exit Anynet+. Select View TV in the Anynet+ menu.

Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices.

Press P

>/<

, PRE-CH and FAV.CH to change the TV mode. (Note that the channel button

operates only when a tuner-embedded Anynet+ device is not connected.)

●

The message Connecting to Anynet+ device... appears on the screen.

You cannot use the remote control when you are conguring Anynet+ or switching to a view

mode. Use the remote control when the Anynet+ setting or switching to view mode is complete.

●

The Anynet+ device does not play.

You cannot use the play function when Plug & Play is in progress.

●

The connected device is not displayed.

Check whether or not the device supports Anynet+ functions. Check whether or not the HDMI 1.3 cable is properly connected. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

Search Anynet+ devices again. You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may

not support Anynet+ functions.

If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power

cord or a power failure, please repeat the device scan.

●

The TV programme cannot be recorded.

Check whether the antenna jack on the recording device is properly connected.

●

The TV sound is not output

through the receiver.

Connect the optical cable between TV and the receiver.

●

English - 28

RECOMMENDATIONS FOR USE

Teletext Feature

Most television stations provide written information services via Teletext. The index page of the Teletext service gives you

information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons.

For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.

You can change Teletext pages by pressing the numeric buttons on the remote control.

1 0

(mode)

Press to select the Teletext mode

(LIST/FLOF). If you press it in the LIST

mode, it switches into the List save mode. In the List save mode, you can save Teletext page into list using the

(store) button.

2 5

(reveal)

Used to display the hidden text (answers

to quiz games, for example). To display

normal screen, press it again.

3 4

(size)

Press to display the double-size letters in the upper half of the screen. For

lower half of the screen, press it again. To display normal screen, press it once again.

4 8

(store)

Used to store the Teletext pages.

Colour buttons (red/green/yellow/

blue)

If the FASTEXT system is used by a broadcasting company, the different

topics covered on a Teletext page are

colour-coded and can be selected by pressing the coloured buttons. Press

one of them corresponding to the required. The page is displayed with

other coloured information that can be

selected in the same way. To display the previous or next page, press the

corresponding coloured button.

6 /

(Teletext on/mix)

Press to activate Teletext mode after selecting the channel providing the Teletext service. Press it twice to overlap

the Teletext with the current broadcasting

screen.

7 :

(exit)

Exit from the Teletext display.

8 1

(sub-page)

Used to display the available sub-page.

9 2

(page up)

Used to display the next Teletext page.

0 3

(page down)

Used to display the previous Teletext page.

! 6

(index)

Used to display the index (contents)

page at any time while you are viewing Teletext.

@ 9

(hold)

Used to hold the display on a given

page if the selected page is linked with

several secondary pages which follow on automatically. To resume, press it again.

# 7

(cancel)

Used to display the broadcast when

searching for a page.

The Teletext pages are organized according to six categories:

Part Contents

A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information.

FASTEXT information.

2 3

+ 306 hidden pages

Samsung 5 series, LE32B530P7WXXC, LE37B530P7WXXC, LE40B530P7WXXC, LE46B530P7WXXC User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual