Samsung LE19R71B, LE19R71W User Manual [sv]

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Kontakt SAMSUNG

Om du har några frågor eller synpunkter om Samsungs produkter, är du välkommen att kontakta Samsung Support.

Kontakt SAMSUNG

Hvis du har spørgsmål eller kommentarer vedrørende Samsung produkter, venligst kontakte Samsung Support.

Kontakt SAMSUNG

Om du har spørsmål eller synspunkter om Samsungs produkter, er du velkommen å kontakte Samsung Support.

Ota yhteyttä Samsungiin

Jos sinulla on kysymyksiä tai kommentteja koskien Samsung tuotteita voitte ottaa yhtyettä Samsung tukeen.

Dünyanın her yerinden SAMSUNG’a ulas•ın.

Samsung ürünleri ile ilgili sorularınız ya da yorumlarınız varsa lütfen SAMSUNG müs•teri hizmetleri merkezi ile temasa geçin.

LCD TV

LE19R7

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

Country

BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN U.K UKRAINE

Customer Care Center

02 201 2418 844 000 844 38 322 887 09 693 79 554 08 25 08 65 65 (€ 0,15/min) 01805 - 121213 (€ 0,12/min) 06 40 985 985 199 153 153 02 261 03 710 0900 20 200 88 (€ 0.10/min) 231 627 22 0 801 801 881 80 8 200 128 0850 123 989 902 10 11 30 08 585 367 87 0870 242 0303 8-800-502-0000

☎

www.samsung.com/be www.samsung.com/cz www.samsung.com/dk www.samsung.com/fi www.samsung.com/fr www.samsung.de www.samsung.com/hu www.samsung.com/it www.samsung.lu www.samsung.com/nl www.samsung.com/no www.samsung.com/pl www.samsung.com/pt www.samsung.com/sk www.samsung.com/es www.samsung.com/se www.samsung.com/uk www.samsung.com/ur

Web Site

BN68-01074C-00

ON-SCREEN MENUS

PC DISPLAY

TELETEXT

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Att tänka på vid visning av stillbild

Stillbilden kan orsaka permanenta skador på bildskärmen.

• Visa inte en stillbild på skärmen i mer än två timmar, eftersom det kan leda till att bilden ligger kvar på skärmen. Att bilden på skärmen behålls kallas även "bildskärmsbränning". Du kan undvika att bilden behålls genom att minska på ljusstyrkan och kontrasten på bildskärmen när du visar stillbilder.

• Användning av LCD TV:n i 4:3-format under en längre tid kan lämna spår av kanterna till vänster, höger och mitt på skärmen

• Visning av stillbilder från tv-spel och datorer längre stunder kan skapa delvisa efterbilder.

För att förhindra detta ska du minska på ljusstyrka och kontrast vid visning av stillbilder.

Forholdsregler for visning af et stillbillede

Et stillbillede kan medføre permanent beskadigelse af tv-skærmen.

• Vis ikke et stillbillede på LCD-panelet i mere end to timer, da det kan medføre billedindbrænding. Denne billedindbrænding kaldes også "screen burn". For at undgå dette skal lysstyrken og kontrasten ved visning af et stillbillede reduceres.

• Hvis du ser LCD-tv i 4:3-format i lang tid, kan der opstå kanter, der vises til venstre, højre og på midten af skærmen.

• Visning af stillbilleder fra videospil og pc i længere end en bestemt tid kan medføre delvise after-billeder.

For at forhindre dette kan du reducere ‘lysstyrke’ og ‘kontrast’, når du afspiller stillbilleder i længere tid.

Forholdsregler ved visning av et stillbilde

Et stillbilde kan forårsake permanent skade på TV-skjermen.

• La ikke et stillbilde vises på LCD-panelet i mer enn 2 timer, da det kan forårsake et ekkobilde. Denne effekten er også kjent som "screen burn", det vil si at skjermbildet brenner seg fast. Du kan unngå dette ved å redusere lysstyrken og kontrastnivået på skjermen når du viser stillbilder.

• Dersom LCD-skjermen brukes til visning i 4:3-format over lengre tid, kan dette føre til at det oppstår linjer til høyre, venstre og i

• Dersom spill og annet settes på pause i en lengre periode enn det som er anbefalt, kan dette gi en etterbildeeffekt

Denne virkningen kan forebygges ved at 'lysstyrke' og 'kontrast' reduseres ved visning av stillbilder.

of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

vilket orsakas av skillnaden i ljusstrålning i skärmen. Uppspelning av en DVD eller tv-spel kan orsaka samma effekter på skärmen. Skador som orsakas av det som beskrivs ovan täcks inte av garantin.

Dette skyldes den forskellige lyspåvirkning af skærmen. Afspilning af dvd eller brug af en spillekonsol kan medføre en tilsvarende effekt på skærmen. Beskadigelse forårsaget af ovenstående dækkes ikke af forsikringen.

midten av skjermen. Dette på grunn av forskjeller mellom lysstrålingen på de forskjellige stedene på skjermen. Dersom skjermen brukes til videospill og visning av DVDer kan dette gi liknende resultater. Skader forårsaket av effekten ovenfor, dekkes ikke av garantien.

Varoituksia pysäytyskuvan käytöstä

Pysäytyskuva voi vaurioittaa television kuvaruutua pysyvästi.

• Älä pidä nestekidetelevision kuvaruudussa pysäytyskuvaa 2 tuntia kauempaa, koska tällöin kuva voi jäädä ruutuun pysyväksi jäännöskuvaksi. Jäännöskuvaa kuvataan myös "kuvan palamiseksi kuvaruutuun". Kun kuvaruudussa on pysäytyskuva, vähennä kirkkautta ja kontrastia, jottei jäännöskuvaa pääsisi muodostumaan.

• LCD-television pitkäaikainen katselu 4:3 kuvasuhteella saattaa jättää kuvaruudulle reunuksia, jotka johtuvat valon säteilyn

• Videopelien ja pc:n still-kuvien määrätyn ajan ylittävä näyttö saattaa aiheuttaa osittaisia jälkikuvia.

Voit estää tämän ilmiön vähentämällä kuvaruudun kirkkautta ja kontrastia, jos katselet pitkään pysäytyskuvia.

Sabit Görüntünün Gösterilmesiyle ilgili Önlemler

Sabit görüntü TV ekran›nda kal›c› hasara neden olabilir.

• LCD ekran panelinde sabit bir görüntüyü 2 saatten fazla tutmay›n. Bu, ekran görüntüsünde tak›lmaya neden olabilir. Bu görüntü tak›lmas›na, "ekran yanmas›" da denir. Bu tür bir kal›c› görüntüyü önlemek için hareketsiz bir görüntü ekrandayken parlakl›k ve kontrast de¤erlerini düﬂük bir seviyeye ayarlay›n›z.

• LCD televizyonu uzun süre 4:3 format›nda izlemek, farkl› ›ﬂ›k emisyonundan dolay› ekran›n solunda, sa¤›nda ve ortas›nda çizgi

•Video oyunlar›ndan ve bilgisayardan uzun süre dura¤an resimlerin görüntülenmesi k›smi görüntü izi oluﬂturabilir. Bu etkiyi önlemek için, dura¤an görüntüleri ekranda tutarken ‘parlakl›k’ ve ‘kontrast’ derecelerini azalt›n.

eroavuudesta kuvaruudulla. DVD:n tai pelin toisto saattaa aiheuttaa samanlaisen vaikutuksen näytöllä. Takuu ei kata tästä syystä syntyneitä vaurioita.

ﬂeklinde izler b›rakabilir. DVD ya da oyun konsolunu oynatmak da benzer etkiye yol açabilir. Yukar›daki etkilerin neden oldu¤u hasarlar Garanti kapsam›nda de¤ildir.

CONNECTING AND PREPARING YOUR TV

List of Parts .............................................................. 2

Viewing the Control Panel ........................................ 3

Viewing the Connection Panel.................................. 4

Viewing the Remote Control .................................... 5

Installing Batteries in the Remote Control................ 6

Switching On and Off................................................ 6

Placing Your Television in Standby Mode ................ 6

Plug & Play .............................................................. 6

SETTING THE CHANNELS

Storing Channels Automatically................................ 7

Storing Channels Manually ...................................... 8

Editing the Channels ................................................ 9

Sorting the Stored Channels .................................... 9

Assigning Channels Names .................................... 10

Fine Tuning Channel Reception .............................. 10

SETTING THE PICTURE

Changing the Picture Standard ................................11

Adjusting the Custom Picture .................................. 11

Changing the Colour Tone........................................ 12

Changing the Picture Size........................................12

Adjusting the Colour Control ....................................13

Freezing the Picture ................................................ 13

SETTING THE SOUND

Changing the Sound Standard ............................ 14

Customizing the Sound ........................................14

Selecting the Sound mode ..................................14

Adjusting the Volume Automatically ....................15

English

SETTING THE TIME

Setting and Displaying the Current Time..............15

Setting the Sleep Timer........................................ 16

Switching the Television

On and Off Automatically......................................17

SETTING THE OTHERS

Choosing Your Language .................................... 17

Setting the Blue Screen Mode..............................18

Selecting the Source ............................................18

Editing the Input Source Names ..........................19

USING THE TELETEXT FEATURE

Teletext Decoder ..................................................19

Displaying the Teletext Information ......................20

Selecting a Specific Teletext Page ......................20

Using Fastext to Select a Teletext Page ..............21

Storing Teletext Pages..........................................21

SETTING THE PC

Setting up Your PC Software

(Based on Windows XP) ......................................22

Display Modes ......................................................22

Setting the PC ......................................................23

RECOMMENDATIONS FOR USE

How to Adjust the Stand ......................................24

How to Adjust the Angle of the TV ......................24

Installing the Wall Mount Kit ................................ 24

Installing VESA compliant mounting devices ......24

Using the Decoration Covers .............................. 24

Troubleshooting:

Before Contacting Service Personnel ..................25

Technical and Environmental Specifications ......25

Symbol Press Important Note One-Touch

Button

English-1

List of Features

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

Remote Control

& Batteries (AAA x 2)

Warranty Card / Registration Card/

Safety Guide Manual

Power Cord Wall Mount kit Owner’s Instructions

Decoration Cover Cleaning Cloth

English-2

Viewing the Control Panel

SOURCE

Toggles between all the available input sources (TV, Ext., AV, S-Video, PC, DVI). In the on-screen menu, use this button as you use the

ENTER button on the remote control.

Press to see an on-screen menu of your TV’s features.

Press to increase or decrease the volume. In the on-screen menu, use the buttons as you use the

 and  buttons on the remote control.

Press to change channels. In the on-screen menu, use the buttons as you use the on the remote control. (Without the Remote Control, You can turn on TV by using the Channel buttons.)

Speaker

(Power)

Press to turn the TV on and off.

Power Indicator

Blinks and turns off when the power is on and lights up in stand-by mode.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

 and  buttons

English-3

Viewing the Connection Panel

The product colour and shape may vary depending on the model.

Power Input

Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable.

Connecting DVI

- Connect the DVI connector to the DVD connector.

- Connect the stereo audio cable to “R - AUDIO - L” on the rear of your set and the other end to “Audio Out” of the sound card on your DVD.

- DVI does not support PC function.

Connecting Computer

- Connect the D- Sub cable (optional) to “PC (PC IN)” on the rear of your set and the other end to the Video Card of your computer.

- Connect the stereo audio cable (optional) to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the sound card on your computer.

Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

- An outdoor aerial / A cable television network / A satellite network

English-4

Connecting Set-Top Box, VCR or DVD

- Connect the VCR or DVD SCART cable (optional) to the SCART connector of the VCR or DVD.

- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD) and connect the VCR (or DVD) to your set.

Connecting External A/V Devices

Connect RCA (optional) or S-VIDEO cable (optional) to an appropriate external A/V device such as VCR, DVD or Camcorder.

- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors on the A/V device.

- Headphone may be connected to the headphone output ( ) on the rear of your set. While the headphone is connected, the sound from the built-in speakers will be disabled.

Kensington Lock

- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

- If you want to use a locking device, contact the dealer where you purchased the TV.

Viewing the Remote Control

Television Standby button

Number buttons for direct channel access

One/Two-digit channel selection

: Volume increase : Volume decrease

Temporary sound switch-off

Menu display and change confirmation

Control the cursor in the menu

Sound mode selection

Picture effect selection

Sound effect selection

Use to see information on the current broadcast

Available source selection

Previous channel

P: Next channel P: Previous channel

Exit the on screen menu

Picture freeze

Picture size selection

Automatic Power-off

Selects the TV mode directly

Teletext Functions

Teletext hold

Teletext index

Teletext sub page

Teletext size selection

Teletext display/mix both teletext information and the normal broadcast

Teletext reveal

Teletext mode selection(LIST/FLOF)

P: Teletext next page P: Teletext previous page

Teletext cancel

Teletext store

Exit from the teletext display

Fastext topic selection

The performance of the remote control may be affected by bright light. This is a special remote control for the visually impaired, and has Braille points on the Power, Channel and Volume buttons.

English-5

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batteries.

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2. Press the button on the front of the set.

You also can press the POWER button or the TV ( ) button on the remote control to turn the TV on. The programme that you were watching last is reselected automatically.

3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or button on the right side of the panel.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

4. To switch your set off, press the POWER button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER button on the remote control.

The screen is turned off and a standby indicator appears on the front of your set.

2. To switch your set back on, simply press the POWER , numeric buttons (0~9) or channel up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.

1. Press the POWER button on the remote control. The message “Start Plug & Play” is displayed with “OK” selected. Press the

2. Select the appropriate language by pressing the  or  button. Press the

3. The message “Check antenna input.” is displayed with “OK” selected. Press the

ENTER button.

ENTER button to confirm your choice.

ENTER button.

Please check that the antenna or cable TV is connected correctly.

English-6

4. Select the appropriate country by pressing the  or  button. Press the

5. The “Auto Store” menu is displayed with the “Start” selected. Press the

The channel search will start and end automatically. After all the available channels are stored, the “Clock Set” menu appears. Press the ENTER button at any time to interrupt the memorization process.

6. Press the ENTER button. Select the “Hour” or “Minute” by pressing the

Set the “Hour” or “Minute” by pressing the

You can also set the hour and minute by pressing the number buttons on the remote control.

7. Press the ENTER button to confirm your setting. The message “Enjoy your viewing.” is displayed.

 Language: Select your language.  Country: Select your country.  Auto Store: Automatically scans for and stores channels available in the local area.  Clock Set: Sets the current time for the TV clock.

If you want to reset this feature...

1. Press the MENU button to display the menu. Press the  or 

Press the ENTER

3. This message “Start Plug & Play” is displayed.

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1. Press the MENU button to display the menu. Press the ENTER button.

2. Press the ENTER button to select “Country”.

3. Select the appropriate country by pressing the  or  button.

Press the

4. Press the  or  button to select “Auto Store”, then press the ENTER button.

5. Press the ENTER button to select “Start”.

The TV will begin memorizing all of the available channels.

Press the ENTER button at any time to interrupt the memorization process and return to the “Channel” menu.

6. After all the available channels are stored, the “Sort” menu appears.

ENTER button to confirm your choice.

ENTER button.

 or 

 or 

button

to select “Setup”, then press the ENTER button.

button

to select

“Plug & Play”

button.

 or  button to select “Channel”, then press the

ENTER button to confirm your choice.

English-7

Storing Channels Manually

You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose:

1. Press the MENU button to display the menu.

2. Press the  or  button to select “Manual Store”, then press the

3. Press the ENTER button to select “Programme”.

4. To assign a programme number to a channel, find the correct number

5. Press the  or  button to select “Colour System”, then press the

6. Select the colour standard required by pressing the  or  button,

7. Press the  or  button to select “Sound System”, then press the

8. Select the sound standard required by pressing the  or  button,

9. If you know the number of the channel to be stored, press the

10. If you do not know the channel numbers, press the  or  button to

11. Press the  or  button to select “Store”, then press the ENTER

12. Repeat steps 3 to 11 for each channel to be stored.

Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify.

Press the

 or  button to select “Channel”, then press the

ENTER button.

by pressing the

You can also set a channel number by pressing number buttons on the remote control.

 or  button and then press the ENTER button.

ENTER button.

then press the

ENTER button.

then press the

If there is an abnormal sound or no sound, re-select the sound system required.

ENTER button.

 or  button to select “Channel”. Press the ENTER button. Select

C (Air channel) or S (Cable channel) by pressing the  or  button. Press the button to select channel. Select the required number by pressing the

 or  button and then press the

ENTER button.

Channel mode: P (Programme mode)

You can also set a channel number by pressing the number buttons on the remote control.

select “Search”. Press the Search by pressing the

C (Air channel mode) S (Cable channel mode)

ENTER button.

 or  button and then press the

ENTER button.

button. Press the  or  button to select “OK”, then press the ENTER button.

 Programme: Selects a program number for the channel.  Colour System: Sets the colour supporting system.  Sound System: Sets the sound supporting system.  Channel: Selects a channel.  Search: Scans for the frequency value for the channel.  Store: Saves your settings.

English-8

Editing the Channels

You can exclude the channels you chose from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning.

1. Use the number buttons to directly select the channel that will be added or deleted.

2. Press the MENU button to display the menu. Press the ENTER button.

3. Press the  or  button to select “Add/Delete”, then press the ENTER button.

4. Press the  or  button to select channels to be deleted or added.

5. Press the button to select “ ” column, then press the ENTER button.

6. Press the EXIT button to exit.

You can view any channel (including an erased channel) by using the number buttons on the remote control.

Sorting the Stored Channels

You can exchange the numbers of two channels, in order to:

1. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the

Press the  or  button to select “Sort”, then press the ENTER button.

Press the ENTER button to select “From”. Press the  or  button until the channel number that you wish to change is displayed. Press the

Press the  or  button to select “To”, then press the ENTER button. Press the identify the channel is displayed. Press the

Press the  or  button to select “Store”, then press the ENTER button. Press the

Repeat steps 3 to 5 for another channel to be sorted.

Press the EXIT button to exit.

 or  button to select “Channel”, then press the

The channels marked with “ ” will be added.

Modify the numeric order in which the channels have been automatically stored.

Give easily remembered numbers to the channels that you watch most often.

ENTER button.

 or  button until the new number by which you wish to

ENTER button.

 or  button to select “OK”, then press the ENTER button.

The selected channel is exchanged with the one previously stored to the chosen number.

English-9

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.

1. Press the MENU button to display the menu. Press the  or  button to select “Channel”, then press the

Press the  or  button to select “Name”, then press the ENTER button.

If necessary, select the channel to be assigned to a new name by pressing the

To... Select a letter, number or symbol Move on the next letter Move back the previous letter Confirm the name

The characters available are : Letters of the alphabet (A~Z)

Repeat steps 3 to 4 for each channel to be assigned to a new name.

Press the EXIT button to exit.

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.

1. Use the number buttons to directly select the channel that you want to fine tune.

2. Press the MENU button to display the menu. Press the ENTER button.

3. Press the  or  button to select “Fine Tune”, then press the ENTER button.

4. Press the  or  button to adjust the fine tuning. Press the

5. Press the EXIT button to exit.

Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner. And the channel number turns red. To reset the fine-tuning, select “Reset” by pressing the press the

ENTER button.

 or 

button. Press the

ENTER

button.

Then...

Press the

 or  Press thebutton Press the



Press the ENTER button

button

Numbers (0~9) Special characters (

, space)

 or  button to select “Channel”, then press the

ENTER

button.

ENTER

button.

 or  button and then

button

English-10

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.

1. Press the MENU button to display the menu. Press the  or  button to select “Picture”, then press the

Press the ENTER button to select “Mode”.

Press the Press the

Press the EXIT button to exit.

 Dynamic: Selects the picture for high-definition in a bright room.  Standard: Selects the picture for optimum display in a normal environment.  Movie: Selects the picture for comfortable display in a dark room.  Custom: Select to view your favorite display settings.

[PC mode]

• Entertain: High brightness. (For watching motion pictures such as a DVD or Video CD.)

You can also press the

P.MODE button on the remote control to select one of the picture settings.

• Internet: Medium brightness.

• Tex t: Normal brightness. (For documentations or works involving heavy text.)

• Custom: Select to view your favorite display settings.

The Picture mode must be adjusted separately for each input source. In the PC mode, “Entertain”, “Internet”, “Text”, “Custom” appears.

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

1. Press the MENU button to display the menu. Press the  or  button to select “Picture”, then press the

Press the  or  button to select “Custom”, then press the ENTER button.

Press the Press the

Press the particular item.

Press the EXIT button to exit.

ENTER button.

 or 

button to select the desired picture effect.

ENTER

button.

(Refer to “Adjusting the Custom Picture”)

(For working with a mixture of images such as text and graphics.)

ENTER button.

 or  button

ENTER

 or  button

to select a particular item.

button.

to decrease or increase the value of a

Press the ENTER button.

 Contrast: Adjusts the lightness and darkness between objects and the background.  Brightness: Adjusts the brightness of the whole screen.  Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.  Colour: Adjusts the colours, making them lighter or darker.

If you make any changes to these settings, the picture mode is automatically switched to “Custom”.

In the PC mode, only “Contrast” and “Brightness” can be adjusted.

English-11

Changing the Colour Tone

You can select the most comfortable colour tone to your eyes.

1. Press the MENU button to display the menu. Press the  or  button

2. Press the  or  button to select “Colour Tone”, then press the

 Cool 2: Makes the colour temperature bluer than “Cool 1” menu.  Cool 1: Makes whites bluish.  Normal: Keeps whites white.  Warm1: Makes whites reddish.  Warm2: Makes the colour temperature redder than “Warm1” menu.

Changing the Picture Size

You can select the picture size which best corresponds to your viewing requirements.

1. Press the MENU button to display the menu. Press the  or  button

2. Press the  or  button to select “Size”, then press the

to select “Picture”, then press the

ENTER button.

Press the Press the

 or  button

ENTER

button.

to select the desired colour tone setting.

Press the EXIT button to exit.

In the PC mode, “Cool” ,“Normal”, “Warn”, “Custom” appears.

to select “Picture”, then press the

ENTER button.

Select the required option by pressing the Press the

ENTER

button.

 or  button

Press the EXIT button to exit.

You can select these options by simply pressing the button on the remote control.

P.SIZE

 Auto Wide: Automatically adjusts the picture size to the "Wide" aspect ratio.  Wide: Adjusts the picture size to Wide appropriate for DVDs or wide broadcasting.  Zoom: Magnifies the Wide picture (in the vertical direction) to fit the screen size.  4:3: This is the default setting for a video movie or normal broadcasting.

In the PC and DVI mode, only “Wide” and “4:3” mode can be adjusted.

(The “Zoom”, “Auto Wide” mode is not supported.)

Zoom:

Select by pressing the  orbuttons. Use the orbutton to move the picture up and down. After selecting , use the orbutton to magnify or reduce the picture size in the vertical direction.

English-12

Adjusting the Colour Control

Adjust the individual R, G, B Colour Controls.

1. Press the MENU button to display the menu. Press the ENTER button.

2. Press the  or  button to select “Colour Control ”, then press the ENTER button.

Press the Press the

Press the particular item.

Press the EXIT button to exit.

Available in PC Mode Only.

Freezing the Picture

1. Press the STILL button to freeze a moving picture.

 or  button to select “Picture”, then press the

 or  button

ENTER

 or  button

Normal sound will still be heard. Press it again to cancel. This function doesn’t work when the input Source is DVI, ane PC.

to select a particular item.

button.

to decrease or increase the value of a

Press the ENTER button.

English-13

Changing the Sound Standard

You can select the type of the special sound effect to be used when watching a given broadcast.

1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the

2. Press the ENTER button to select “Mode”.

Press the Press the

4. Press the EXIT button to exit.

 Standard: Selects the normal sound mode.  Music: Emphasizes music over voices.  Movie: Provides live and full sound for movies.  Speech: Emphasizes voices over other sounds.  Custom: Selects your custom sound settings.

You can also select these options by simply pressing the

S.MODE button on the remote control.

Customizing the Sound

The sound settings can be adjusted to suit your personal preferences. (Alternatively, you can use one of the “automatic” settings.)

1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the

2. Press the  or  button to select “Custom”, then press the ENTER button.

3. Press the  or  button to select a particular item. Press the

4. Press the  or button to decrease or increase the value of a particular item. Press the

5. Press the EXIT button to exit.

If you make any changes to the “automatic” settings, the sound mode is automatically switched to the “Custom” mode.

ENTER button.

 or 

button to select the desired sound effect.

ENTER

button.

ENTER button.

Selecting the Sound mode

You can set the sound mode by pressing the “DUAL I-II” button. When you press it, the current sound mode is displayed on the screen.

You can also set these options simply by pressing the DUAL I-II button on remote control.

Stereo

NICAM Stereo

Audio Type

English-14

Mono

Stereo

Dual

Mono

Stereo

Dual

DUAL 1/2

MONO

STEREO MONO

DUAL1 DUAL 2

MONO

MONO STEREO

MONO DUAL1

DUAL 2

Default

Automatic

change DUAL 1

Automatic

change DUAL 1

Adjusting the Volume Automatically

Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature let you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the

2. Press the  or  button to select “Auto Volume”, then press the ENTER button.

3. Press the  or  button to select “On” or “Off”. Press the

ENTER button.

4. Press the EXIT button to exit.

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers.

1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the

2. Press the  or  button to select “Time”, then press the ENTER button.

3. Press the ENTER button to select “Clock Set”.

To...

Move to “Hour” or “Minute” Set the “Hour” or “Minute” Press the

ENTER button.

Press the EXIT button to exit.

If you disconnect the power cord, you have to set the clock again. You can also set hour and minute by pressing the number buttons on the remote control.

ENTER button.

Press the...

 or  button.  or  button.

English-15

Setting the Sleep Timer

Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears.

You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode.

1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the

ENTER button.

2. Press the  or  button to select “Time”, then press the ENTER button.

3. Press the  or  button to select “Sleep Timer”, then press the

ENTER button.

4. Press the  or  button repeatedly until the desired time appears (Off, 30, 60, 90, 120, 150, 180). Press the

The TV automatically switches to standby mode when the timer reaches 0.

ENTER

button.

5. Press the EXIT button to exit.

English-16

Switching the Television On and Off Automatically

You can set the On/Off timers so that the set will:

Switch on automatically and tune to the channel of your choice at

the time you select.

Switch off automatically at the time you select.

1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the

ENTER button.

2. Press the  or  button to select “Time”, then press the ENTER button.

3. Press the  or  button to select “On Timer”, then press the

ENTER button.

4. Press the  or  button to adjust “Hour”, then press the  button to move to the next step. Set other items using the same method as above. When finished, press the

ENTER button to return.

5. Press the  or  button to select “Off Timer”, then press the ENTER button.

6. Press the  or  button to adjust “Hour”, then press the  button to move to the next step. Set other items using the same method as above. When finished, press the

ENTER button to return.

7. Press the EXIT button to exit.

The first step is to set the television’s clock. (refer to “Setting and Displaying the Current Time” on page 15) You can also set hour and minute by pressing the number buttons on the remote control. The "Activation" setting must be set to "On" in order for the timers to work.

Choosing Your Language

When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.

1. Press the MENU button to display the on-screen menu.

Press the

2. Press the  or  button to select “Language”, then press the

ENTER button.

3. Select a particular language by pressing the  or  button repeatedly.

Press the

4. Press the EXIT button to exit.

 or  button to select “Setup”, then press the ENTER button.

ENTER button.

You can choose one of 15 languages.

English-17

Setting the Blue Screen Mode

If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off".

1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the

2. Press the  or  button to select “Blue Screen” then press the ENTER button.

3. Press the  or  button to select “On” or “Off”. Press the

4. Press the EXIT button to exit.

Selecting the Source

You can select among external sources connected to your TV’s input jacks.

1. Press the MENU button to display the menu. Press the

2. Press the ENTER button to select “Source List”.

3. Select the required device by pressing the  or  button.

Press the

ENTER button.

ENTER button to select “Input”.

ENTER button.

You can only select a source if it is connected to your TV.

Press the SOURCE button on the remote control to toggel between all the available source. TV mode can be selected by pressing the remote control but you cannot select it by pressing the

English-18

TV or P / button on the

SOURCE button.

Editing the Input Source Names

Name the device connected to the input jacks to make your input source selection easier.

1. Press the MENU button to display the menu. Press the

2. Press the  or  button to select “Edit Name”, then press the ENTER button.

Press the Press the

4. Press the  or  button to select the required device. Press the

The following options are available:

---- - VCR - DVD - Cable STB - HD STB - Satellite STB - AV Receiver DVD Receiver - Game - Camcorder - DVD Combo - DHR - PC

DHR: DVD HDD Recorder

5. Press the EXIT button to exit.

Teletext Decoder

Most set channels carry “teletext ”, pages of written information that provide information such as:

The teletext pages are organized according to six categories:

ENTER button, to select “Input”.

 or 

button to select the device that you wish to edit.

ENTER

button.

ENTER button.

Television programme times. News bulletins and Weather forecasts. Sports results. Subtitles for the hard of hearing.

Part

A B C D E F

Contents

Selected page number. Broadcasting station identity. Current page number or search status. Date and time. Text. Status information.

English-19

Displaying the Teletext Information

You can display teletext information at any time, but signal reception must be good. Otherwise:

Information may be missing. Some pages may not be displayed.

To activate the teletext mode and display the contents page:

Using the P () or P () button, select the channel providing the teletext service.

Press the TTX/MIX () button to activate the teletext mode.

The contents page is displayed. It can be redisplayed at any time by pressing the MENU () button.

3. Press the TTX/MIX () button again.

The actual broadcast will be displayed simultaneously with the teletext page on the screen.

4. Press the TV() button again to exit from the Text display.

If any broken character appears while Text is being viewed, make sure that the Text language is identical with the language in the “Setup” menu mode. If both languages are different, select the same language with the Text language on the “Setup” menu.

Selecting a Specific Teletext Page

Press the number buttons on the remote control to enter the page number directly:

Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons.

If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the again to resume.

3. Using the various display options:

To display...

Both teletext information and the normal broadcast

Hidden text (answers to quiz games, for example)

The normal screen

A secondary page, by entering its 4-digit number

The next page The previous page

Double-size letters in the:

 Upper half of the screen  Lower half of the screen

Normal screen

()

. Press the

()

button

Press the...

TTX/MIX ( )

INFO ( )

DUAL I-II ( )

()

 Once  Twice

 Three times

English-20

Using Fastext to Select a Teletext Page

The various topics included in the teletext pages are colour-coded, and can be selected by pressing the coloured buttons on the remote control.

Display the teletext contents page by pressing the TTX/MIX ()

Press the coloured button corresponding to the topic that you wish to select (The available topics are listed on the status information line).

3. Press the Red button to display the previous page. Press the Green button to display the next page.

4. Press the TV () button again to exit from the Text display.

Storing Teletext Pages

You can store up to four teletext pages to display them later at leisure.

1. Select the LIST mode using the

The

SOURCE

Press the coloured button corresponding to the page that will be replaced.

3. Enter the new page number using the numeric buttons.

4. Repeat steps 2 and 3 for each page to be stored, using a different

coloured button each time.

5. Press the SLEEP

button.

()

SOURCE

button is used to switch between the LIST and FLOF modes.

()

button until the corresponding blocks blink.

()

button.

English-21

Setting up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1. First, click on “Control Panel” on the Windows start menu.

2. When the control panel window appears, click on “Appearance

and Themes” and a display dialog-box will appear.

3. When the control panel window appears, click on “Display” and a display dialog-box will appear.

4. Navigate to the “Settings” tab on the display dialog-box. The correct size setting (resolution): Optimum - 1440 X 900 If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended. (All resolutions between the supported limits are supported)

Mode

IBM

VESA

Resolution

720 x 400 640 x 480

640 x 480 640 x 480 800 x 600

800 x 600 1024 x 768 1024 x 768 1024 x 768

1280 x 1024 1280 x 1024

1440 x 900

Horizontal

Frequency (kHz)

31.469

37.861

37.500

37.879

48.077

48.363

56.476

60.023

63.981

79.976

70.635

Vertical

Frequency (Hz)

70.087

59.940

72.809

75.000

60.317

72.188

60.004

70.069

75.029

60.020

75.025

74.984

Pixel Clock

Frequency (MHz)

28.322

25.175

31.500

40.000

50.000

65.000

75.000

78.750

108.00

135.00

136.75

Sync Polarity

(H/V)

- / +

- / -

- / + / + + / +

- / -

+ / +

+ / + + / +

- / +

The interlace mode is not supported. The set might operate abnormally if a non-standard video format is selected. DVI does not support PC function.

English-22

Setting the PC

Image Lock: The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.

Preset: Press the SOURCE button to select PC mode.

Press the MENU button to display the menu. Press the

 or  button to select “Setup”, then press the ENTER button.

Press the  or  button to select “PC”, then press the ENTER button.

Press the ENTER button to select “Image Lock”.

Press the  or  button to select “Coarse” or “Fine”, then press the ENTER button.

Press the  or  button to adjust the screen quality. Press the

ENTER button.

Press the EXIT button to exit.

Position: Adjust the PC’s screen positioning if it does not fit the TV screen.

Press the MENU button to display the menu. Press the

 or  button to select “Setup”, then press the ENTER button.

Press the  or  button to select “PC”, then press the ENTER button.

Press the  or  button to select “Position”, then press the ENTER button.

Press the  or  button to adjust the V-Position (Vertical-Position). Press the

 or  button to adjust the H-Position (Horizontal-Position).

Press the

ENTER button.

Press the EXIT button to exit.

Image Reset: You can replace all image settings with the factory default values.

Press the MENU button to display the menu. Press the

 or  button to select “Setup”, then press the ENTER button.

Press the  or  button to select “PC”, then press the ENTER button.

Press the  or  button to select “Image Reset”, then press the ENTER button.

Press the EXIT button to exit.

Auto Adjustment: Auto adjustment allows you to set the TV to self-adjust to the incoming PC video signal. The fine, coarse and position values are adjusted automatically.

Press the MENU button to display the menu. Press the

 or  button to select “Setup”, then press the ENTER button.

Press the  or  button to select “PC”, then press the ENTER button.

Press the  or  button to select “Auto Adjustment”, then press the ENTER button.

Press the EXIT button to exit.

English-23

How to Adjust the Stand

(1)

(2)

How to Adjust the Angle of the TV

Button

1. Place the front of the TV onto a soft cloth or cushion on a table as in Figure (1).

- Align the TV bottom along the table edge.

2. Press on the center of the TV back. Adjust the stand as in Figure (2) while pressing the button on the back of the stand.

3. Place the TV on the table so that the TV sits safely.

(1) Angle adjustment when using the

TV on its stand.

When you adjust the stand, press the button on the back of the stand.

(2) Angle adjustment when converting from

Stand to Wall mount (1 3, 3 1)

(3) Angle adjustment when LCD TV

is wall-mounted

1. Figure (1) shows the adjustment angle (-2°~14°) when you use the LCD on its stand. Excessive tilting can turn the LCD TV over which may cause damage.

2. Figure (2) shows the adjustment angle (14°~80°) when you convert the LCD from stand-based use to wall-mount.

3. Figure (3) shows the adjustment angle (0°~10°) when you mount the LCD TV to a wall.

You will hear a “Click” sound when changing the angle from 1 to 2 or 3 to 2.

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For the detailed information on installing the Wall Mount, see the instruction in the Wall Mount items. Contact a technician for installing the wall bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

Installing VESA compliant mounting devices

Button

(2)

Mounting pad

(sold separately)

(3)

1. Place the TV down on a soft cloth or cushion on a table.

2. Adjust the stand, pressing the button on the back

of the stand.

3. Align the mounting interface pad (not supplied) with the holes in the stand bottom and secure it with the four screws that come with the arm-type base, wall mount hanger or other bases (not supplied).

Using the Decoration Covers

1. When installing the TV on the wall without using the stand, insert decoration covers into the holes as described in the picture (1).

(1)

(2)

2. After inserting the decoration covers, fasten them with 4 screws as described in the picture (2).

English-24

Troubleshooting: Before Contacting Service Personnel

No sound or picture

Normal picture but no sound

No picture or black and white picture

Sound and picture interference

Blurred or snowy picture, distorted sound

Remote control malfunctions

“Check signal cable.” message is displayed.

On PC mode, “Mode Not Supported.” message is displayed.

The TFT LCD panel uses a panel consisting of sub pixels (3,888,000) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

 Check that the mains lead has been connected to a wall socket.  Check that you have pressed the button on the  Check the picture contrast and brightness settings.  Check the volume.

 Check the volume.  Check whether the MUTE button has been pressed on the remote control.

 Adjust the colour settings.  Check that the broadcast system selected is correct.

 Try to identify the electrical appliance that is affecting the set and move it further

away.

 Plug your set into a different mains socket.

 Check the direction, location and connections of your aerial.

This interference is often due to the use of an indoor aerial.

 Replace the remote control batteries.  Clean the upper edge of the remote control (transmission window).  Check the battery terminals.

 Check that the signal cable is firmly connected to the PC or video sources.  Check that the PC or video sources are turned on.

 Check the maximum resolution and the frequency of the video adaptor.  Compare these values with the data in the Display Modes.

front fo the set.

Technical and Environmental Specifications

Model Name

Screen Size (Diagonal)

Power Supply

Power Consumption

PC Resolution

Sound

Output

Dimension (WxDxH)

Body With stand

Weight

With stand

Environmental Considerations

Operating Temperature Operating Humidity Storage Temperature Storage Humidity

Design and specifications are subject to change without prior notice. This device is a Class B digital apparatus.

10 °C to 40 °C (50 °F to 104 °F)

-20 °C to 45 °C (-4 °F to 113 °F)

LE19R7

19 inches

AC 220-240 V, 50 Hz

45W

1440 x 900 @ 60Hz

3W x 2

485 x 58 x 369 mm

485 x 200 x 408 mm

5.6 kg

10% to 80%, non-condensing

5% to 95%, non-condensing

English-25

Innehåll

ANSLUTA OCH FÖRBEREDA DIN TV

Lista över delar ........................................................ 2

Översikt över kontrollpanelen .................................. 3

Översikt över anslutningspanelen ............................ 4

Översikt över fjärrkontrollen...................................... 5

Sätta i batterierna i fjärrkontrollen ............................ 6

Sätta på och stänga av TVn .................................... 6

Sätta tv i vänteläge .................................................. 6

Plug & Play .............................................................. 6

STÄLLA IN KANALERNA

Lagra kanaler automatiskt ........................................ 7

Lagra kanaler manuellt ............................................ 8

Redigera kanaler ...................................................... 9

Sortera de lagrade kanalerna .................................. 9

Namnge kanaler ...................................................... 10

Fininställning av kanalmottagningen ........................10

STÄLLA IN BILDEN

Ändra bildstandard.................................................... 11

Ändra bildinställningarna ..........................................11

Ändra Färgton .......................................................... 12

Ändra Bildstorlek ......................................................12

Att justera Min färgkontroll........................................ 13

Frysa bilden .............................................................. 13

STÄLLA IN TIDEN

Ställa in och visa aktuell tid..................................15

Ställa in sovtimern ................................................16

Slå på och stänga av tv:n automatiskt ................ 17

STÄLLA IN ÖVRIGA

Välja språk............................................................ 17

Ställa in läget blå bakgrund.................................. 18

Välja källa ............................................................18

Redigera ingångskällornas namn ........................ 19

ANVÄNDA TEXT-TV-FUNKTIONEN

Text-tv-dekoder ....................................................19

Visa text-tv-information ........................................20

Välj en specifik text-tv-sida ..................................20

Använda Fastext (Snabbtext)

för att välja en text-tv-sida ....................................21

Lagra Text-TV-sidor ..............................................21

STÄLLA IN DATORN

Installera programvaran (baserad på XP) ............22

Visningsläge ........................................................ 22

Ställa in datorn......................................................23

Svenska

STÄLLA IN LJUDET

Ändra ljudstandard .............................................. 14

Anpassa ljudet ......................................................14

Välja ljudläge ........................................................14

Justera volymen automatiskt ..............................15

Symboler Tryck Viktigt Obs!

REKOMMENDATIONER FÖR ANVÄNDNING

Justera stativet.......................................................... 24

Så här justerar du vinkeln på TV:n ......................24

Installera väggfästessatsen ...................................... 24

Installera VESA-kompatibla monteringsenheter ...... 24

Att använda dekorationsskydden ........................ 24

Felsökning: Innan du kontaktar servicepersonal.. 25

Tekniska och miljömässiga specifikationer ..........25

Entrycksknapp

Svenska-1

Lista över delar

Försäkra dig om att följande delar följer med din LCD TV. Kontakta din återförsäljare om det saknas något.

Fjärrkontroll och batterier

(AAA x 2)

Garantikort / Säkerhetsguide/

Registreringskort

Nätsladd

Väggmonteringssats

Dekorationsskydden Rengöringstrasa

Användarhandbok

Svenska-2

Översikt över kontrollpanelen

SOURCE

Växlar mellan alla tillgängliga ingångskällor (TV - Ext. - AV - S-Video - PC - DVI). Använd den här knappen på skärmmenyn när du använder knappen

Tryck här om du vill se en skärmmeny med TV:ns funktioner.

Tryck för att sänka eller höja volymen. På skärmmenyn använder du knapparna som du använder knapparna

ENTER på fjärrkontrollen.

 och  på fjärrkontrollen.

Tryck här när du vill byta kanal. På skärmmenyn använder du knapparna när du använder knapparna (Om du inte använder fjärrkontrollen kan du koppla på TV:n med hjälp av kanalknapparna.)

Högtalare

(Ström)

Tryck här när du ska slå på och stänga av TV:n.

Strömindikator

Blinkar och stängs av när strömmen är på och tänds i viloläge.

Mottagare för fjärrkontrollen

Rikta fjärrkontrollen mot den här punkten på TV:n.



och på fjärrkontrollen.

Svenska-3

+ 124 hidden pages