The DCS telephone system has the following pre-set (default) feature
access codes. These codes can be used if a key is not available for
the feature you want to use. Standard telephone users must always
dial these codes.
9Call attendant or system
o p e r a t o r
10 + xxxRetrieve parked calls
1 1Put calls on and take calls off
h o l d
12 +xxxRetrieve calls on hold at another
s t a t i o n
1 3Door lock release
16 + xxxMake speed dial calls
1 7Save number and redial it
1 8Recall dial tone for new call
1 9Last number redial
2 x xExtension numbers
3 x xExtension numbers
4 0 0Cancel Do not Disturb
4 0 1Set Do Not Disturb
4 1Set Message No Ring
42 + xxxCancel message
4 3Set/return messages
4 4Busy station/line callback
4 5Busy station camp-on
4 6Set up a conference
4 7Enter account code
4 8Set programmed station
m e s s a g e
4 9Send flash to outside line
5 0 0Station hunt group
t o
5 2 9Station hunt group
5 3 + g r p + 0 Out of group
5 3 + g r p + 1 In group
5 4 + z o n eMeet Me Page
55 + 0Page all internal zones
55 + 1Page internal zone 1
55 + 2Page internal zone 2
55 + 3Page internal zone 3
55 + 4Page internal zone 4
55 + 5Page external zone 1
55 + 6Page external zone 2
55 + 7Page external zone 3
55 + 8Page external zone 4
55 + 9Page all external zones
55 + ✱All Page
5 6Meet Me Answer
5 7Alarm sensor clear
5 8DISA alarm clear
5 9Walking class of service
6 0 0Cancel all call forwarding
601 + xxx Set Forward All Calls
602 + xxx Set Forward Busy
603 + xxx Set Forward No Ans
604 + xxx Set Fwd Busy/No Ans
605 + xxx Set Fwd Follow m
6 5Directed call pickup
6 6Group call pickup
6 7Universal Answer
6 8 1Voice Dialler
6 8 2Voice Dialler Record
7 x xIndividual line numbers
8 xLine groups
0Line group 0 (Local)
LCD 24B STD 24B
LCD 24Bi
LCD 12B STD 12B
6B ENHANCED
KEYSET USER GUIDE
S A M S U N G
D I G I TAL COMMUNICATION SYSTEM
JUNE 1998
SAMSUNG ELECTRONICS CO. LT D
P u bl i c ation Info rm at i o n
Samsung Electronics re s e rves the right without prior notice to revise info rm ation in this publ i c ation for any re a s o n .
Samsung Electronics re s e rves the right without prior notice to make ch a n ge s
in design or components of equipment as engi n e e ring and manu fa c t u ri n g
m ay wa rra n t .
C o py right 1998
Samsung Electronics Co. Ltd
All rights re s e rve d. No part of this manual may be rep roduced in any fo rm or
by any means - grap h i c, e l e c t ronic or mechanical, including re c o rd i n g,
t ap i n g, photocopying or info rm ation re t ri eval system - without ex p re s s
w ritten permission of the publisher of this mat e ri a l .
DCS telephones are called "keysets." They contain buttons or "keys"
that are used to access or activate the many features of your DCS
system. The keys with paper designation strips are programmable
keys which can be programmed for a specific functions on your
keyset that you require. See your System Administrator to get your
most frequently used features assigned to your programmable keys.
Lines from the telephone company are "C.O. lines." Calls on these
lines are referred to as "outside calls." Your system can have
individual C.O. line keys or lines may be assigned to groups. When
they are in a group, you access a line by dialling an access code or
pressing a programmed button. For example: dial 0 or press the
L O C A L key to get a local outside line. Each line in the system is
numbered, beginning with 701, then 702, 703, etc.
Direct Station Selection (D S S) keys are programmed to ring specific
stations. You can press a D S S key instead of dialing the extension
n u m b e r. A D S S key will light red when that station is busy (Busy
Lamp Indication). Each extension in the system is numbered,
beginning with 201, then 202, 203, etc
DCS provides distinctive ring patterns to your keyset:
• Outside calls have a double ring tone repeated.
• Internal calls have a single ring tone repeated.
• Door phone calls and alarm/appointment reminders have a short
ring tone repeated very quickly.
CALL INDICAT I O N S
The keys on your phone have light emitting diodes (LEDs). Some of
these are tri-coloured LEDs that light green, red or amber. Some of
the keys can only light red. See telephone layout for details.
Intercom calls, also called internal calls, always appear on your C A L L
buttons. They will always light green. You can have up to eight C A L L
buttons, but two are recommended.
Outside calls appear on individual line keys if they are assigned.
When an individual line is not assigned to its own key, it will appear on
a C A L L button. Your outside calls will light green on your keyset and
1
red on other keysets.
You never lose sight of your calls while they are on hold. They stay
right where you put them and are identified with a green flashing light.
Some simple rules to remember:
• Any steady LED indicates the line or feature is in use.
• A fast flashing green LED indicates a new call incoming call.
• A slow flashing green or red LED indicates a call is on hold.
• A slow flashing amber LED indicates a recall to your keyset.
S P E A K E R P H O N E
Pressing the A N S / R L S key will answer or release a call on the
speaker phone.
Switching from the handset to the speaker phone is easy. Press the
S P E A K E R key and hang up the handset.
HOT KEYPA D
On the DCS, your keysets keypad can be made "live" or "hot" so that
it is not necessary to lift the handset or press S P E A K E R before you
begin dialing. Calls can be made and features activated by simply
dialing the outside line number, line access code, intercom number or
feature access code.
If the Hot Keypad feature has been turned off, you must first lift the
handset or press S P E A K E R before dialing.
VOLUME CONTROLS
DCS keysets use the U P & DOWN keys to adjust the ringer volume
while the keyset is ringing, the speaker volume while the
speakerphone is in use and the handset volume while you are
listening. These three levels will be stored in memory until changed. If
background music is turned on at your keyset, the volume keys will
also control the level of music. The volume of pages heard through
the speaker of keyset can be adjusted during a page announcement
by using the volume keys. There are 16 levels for each volume
setting. The volume of off-hook ring is controlled by a userprogrammable setting.
SYSTEM TO N E S
The system provides several tones to assist you. Some of these tones
are already familiar to you.
2
WARNING
The handset receiver on the Keyset may retain metallic
objects. Care should be taken when using the handset in
the vicinity of small metal objects.
3
LCD 24B or STD24B KEYSET LAY O U T
LABELLING PROGRAMMABLE KEYS
Insert the end of a paper clip into the notch of the clear cover. Push
the cover sideways. Lift the cover and remove the designation strip.
Label the designation strip. Replace the strip and cover.
32 CHARACTER DISPLAY
Two lines with 16 character
each.
On LCD 24B only
TRANSFER KEY
HOLD KEY
ANSWER/RELEASE KEY
SOFT KEYSUsed to
activate feature via the
display. - LCD 24B only
PULLOUT
DIRECTORY TRAY
S C R O L LK E Y Used to scroll
through displays.
16 PROGRAMMABLE KEYS
WITH TRI-COLORED LIGHTS
Used for CALL buttons,
intercom calls and many other
system features.
VOLUME CONTROL KEYS
Used to set independent levels
for handset, speaker, background
music, ring and page volumes.
LAST NUMBER REDIAL KEY
MEMORY(SPEED DIAL) KEY
DO NOT DISTURB KEY
SPEAKER KEY Used to switch
call to speakerphone.
8 PROGRAMMABLE KEYS
WITH RED LIGHTS Used to
call stations directly, for OneTouch dialling and many other system
f e a t u r e s .
TRUNK FLASH KEY
M I C R O P H O N E
For handsfree operation.
4
LCD 12B or STD12B KEYSET LAY O U T
LABELLING PROGRAMMABLE KEYS
Insert the end of a paper clip into the notch of the clear cover. Push
the cover sideways. Lift the cover and remove the designation strip.
Label the designation strip. Replace the strip and cover.
32 CHARACTER DISPLAY
Two lines with 16 character
each.
On LCD 12B only
TRANSFER KEY
HOLD KEY
ANSWER/RELEASE KEY
SOFTKEYS Used to
activate feature via the
display.- LCD 12B only
PULLOUT
DIRECTORY TRAY
S C R O L LK E Y Used to
scroll through displays.
8 PROGRAMMABLE KEYS
WITH TRI-COLORED LIGHTS
Used for CALL buttons,
intercom calls and many other
system features.
VOLUME CONTROL KEYS
Used to set independent levels
for handset, speaker, background
music, ring and page volumes.
LAST NUMBER REDIAL KEY
MEMORY(SPEED DIAL) KEY
DO NOT DISTURB KEY
SPEAKER KEY Used to switch
call to speakerphone.
4 PROGRAMMABLE KEYS
WITH RED LIGHTS Used to
call stations directly, for OneTouch dialling and many other
system features.
TRUNK FLASH KEY
M I C R O P H O N E
For handsfree operation.
5
LCD 24Bi KEYSET LAY O U T
LABELLING PROGRAMMABLE KEYS
At the right edge lift up the plastic cover and remove the designation
s t r i p .
Label the designation strip and replace. Insert the plastic cover
pressing firmly to click place.
32 CHARACTER DISPLAY
Two lines with 16 character each.
RING INDICATOR LAMP
SOFTKEYS Used to activate
feature via the display.
S C R O L LK E Y Used to scroll
through displays.
16 PROGRAMMABLE KEYS
WITH TRI-COLORED LIGHTS
Used for CALL buttons,
intercom calls and many other
system features.
8 PROGRAMMABLE KEYS
WITH RED LIGHTS Used to
call stations directly, for OneTouch dialling and many other
system features.
VOLUME CONTROL KEYS
Used to set independent levels
for handset, speaker, background
music, ring and page volumes.
HOLD KEY
SPEAKER KEY Used to switch
call to speakerphone.
MEMORY(SPEED DIAL) KEY
LAST NUMBER REDIAL KEY
TRANSFER KEY
ANSWER/RELEASE KEY
M I C R O P H O N E
For handsfree operation.
6
6B ENHA NCED KEYSET LAY O U T
LABELLING PROGRAMMABLE KEYS
Insert the end of a paper clip into the notch of the clear cover. Push
the cover sideways. Lift the cover and remove the designation strip.
Label the designation strip. Replace the strip and cover.
6 PROGRAMMABLE KEYS
WITH RED-COLORED LIGHTS
Used for CALL buttons,
intercom calls and many other
system features.
VOLUME CONTROL KEYS
Used to set independent levels
for handset, speaker, background
music, ring and page volumes.
TRANSFER KEY
TRUNK FLASH KEY
SPEAKER KEY
Used to switch call to speakerphone
HOLD KEY
MICROPHONE
For handsfree operation.
PULLOUT
DIRECTORY TRAY
7
ADD-ON MODULE(AOM) LAY O U T
FLEXIBLE FEATURE
CONTROL KEY
RED LED INDICATOR
8
Loading...
+ 37 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.