Samsung LC630-ZC User Manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comuníquese con SAMSUNG WORLDWIDE
Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de atención al cliente de SAMSUNG.
Country Customer Care Center
CANADA 1-800-SAMSUNG(726-7864) www.samsung.com
U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com
Web Site Address
Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc., Service à la Clientèle 55 Standish Court Mississauga, Ontario L5R 4B2 Canada
Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660-2112
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/register
Model Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
See the warranty card for more information on warranty terms.
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full­motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.
SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT• Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
In the United States : 1-800-SAMSUNG (1-800-726-7864) – In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LCD screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:
Avoid displaying the same TV channel for long periods.• Always try to display any image on full screen, use TV set picture format menu for best possible match.• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout •
process. Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.•
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
x
The appearance may differ depending on the product.
Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand. Installation with a wall-mount.
4inches
4inches
4inches
4inches
4inches
4inches
4inches
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
English
2
Contents
P
POWER
F A V . CH
MEDIA.P
P . MODE
S.MODE
P . SIZE
CC
MTS
INFO
SLEEP
TOOLS
CH LIST
D
Getting Started
List of Features y ......................................................... 4
Accessories y .............................................................. 4
Installing the LCD TV Stand (40 ~ 55 inch TVs) y .........4
Viewing the Control Panel y ......................................... 5
Viewing the Remote Control y ...................................... 6
Connecting to an Antenna y ........................................7
Plug & Play (Initial Setup) y ........................................... 7
Connections
Connecting to an AV Device y ......................................8
Connecting to an Audio Device y ................................. 9
Connecting to a PC y ..................................................9
Changing the Input source y ...................................... 10
Basic Features
How to Navigate Menus y .......................................... 11
Channel Menu y ........................................................ 11
Seeing Channels 11 Using Favorite Channels 12 Memorizing channels 12 Editing channels 12 Other Features 12
Picture Menu y .......................................................... 13
Changing the Preset Picture Mode 13 Adjusting picture settings 14 Economical Solutions 14 Setting up the TV with your PC 14 Changing the Picture Options 15
Sound Menu y ........................................................... 17
Changing the Preset Sound Mode 17 Adjusting sound settings 17 Sound Systems, Etc. 17
Setup Menu y ............................................................ 18
Setting the Time 18 Using the Sleep Timer 18 Setting the On/Off Timer 18 Locking Programs 19 Other Features 20 Picture In Picture (PIP) 22
Support Menu y ......................................................... 22
Advanced Features
Network Connection y ...............................................24
Connecting to a Wired Network 24 Connecting to a Wireless Network 26
Media Play y .............................................................. 30
Connecting a USB Device 30 Connecting to the PC through network 30 Screen Display 32 Playing Multiple Files 35 Media Play - Additional Functions 35
Anynet+ y ................................................................. 37
Setting Up Anynet+ 38 Switching between Anynet+ Devices 38 Recording 38 Listening through a Receiver 39 Troubleshooting for Anynet+ 39
AllShare y ..................................................................40
About AllShare 40 Setting Up AllShare 40
Other Information
Assembling the Cables y ........................................... 42
Anti-theft Kensington Lock y ...................................... 42
Installing the Wall Mount y .........................................42
Securing the TV to the Wall y ..................................... 44
Troubleshooting y ......................................................45
Storage and Maintenance 47
Specifications y ......................................................... 48
License 49
Dimensions y ............................................................. 50
Index y ...................................................................... 51
ENGLISH
Check the Symbol!
t
This function can be used by pressing the
TOOLS button on the remote control.
Note :
Important information
O
Step by step guide :
Informs you how to access
the menu.
English
3
Getting Started
List of Features
Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed y without a cable box / STB (Set-Top-Box) satellite receiver.
Media Play y : Allows you to play music files, pictures, and movies saved on a USB or your PC. (P. 30) AllShare y : AllShare connects your TV and compatible Samsung mobile phones/devices through a network. (P. 40) Self Diagnosis y : You can check picture and sound operation. (P. 22)
Accessories
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
The items' colors and shapes may vary depending on the models.
Remote Control (BN59-01041A) & Batteries (AAA x 2) y Owner’s Instructions y Warranty Card / Safety Guide / Quick Setup Guide y
Blanking Bracket y
(BN63-06339A)
Cable Tie y
(BN61-05596A)
Installing the LCD TV Stand (40 ~ 55 inch TVs)
Components
When installing the stand, use the provided components and parts.
A B
1 EA 1 EA
Stand Guide Stand Screws
1
B
2
Cleaning Cloth (BN63-01798B) y Power Cord y
(46 ~ 60 inch TVs)
Holder-Ring (4ea) y
(BN61-04529A)
C
or
9EA (M4 X L12)
Top View
C
4EA
4
A
English
Rear
Front
C
1EA
43
C
Bottom View
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
Make sure that at least two persons lift and move the LCD TV.
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to
one side.
4EA
Viewing the Control Panel
The product color and shape may vary depending on the model.
01 Getting Started
Remote control sensor
Speakers
P
(Power)
Remote control sensor Aim the remote control towards this spot on the TV.
SOURCE
MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features.
y
z
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
E
Turns the TV on or off.
Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control.
Adjusts the volume. In the OSD, use the and buttons on the remote control.
Changes the channels. In the OSD, use the and buttons on the remote control.
y
z
buttons as you would use the
Power Indicator
buttons as you would use the
English
5
PRE-CH
CH
VOL
MENU
MUTE
RETURN
CH LIST
EXIT
ABCD
MEDIA.P F AV . CH
P . MODE
S.MODE
CC
SLEEP
P . SIZE
MTS
TOOLS
INFO
Getting Started
Viewing the Remote Control
This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel,
Volume buttons.
Turns the TV on and off.
Displays and selects the available video
Press to directly access channels.
Press to select additional channels (digital)
being broadcast by the same station. For
example, to select channel ‘54-3’, press
Displays the channel list on the screen. (P. 11)
Quickly select frequently used functions.
Selects the on-screen menu items and changes the values seen on the menu.
Use these buttons in Media Play and
‘54’, then press ‘-’ and ‘3’.
Adjusts the volume.
Views Media Play. (P. 30)
Returns to the previous menu.
(: controls recording on Samsung
recorders with the Anynet+ feature)
sources. (P. 10)
Anynet+ modes.
Turns the remote control light on and off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to off will reduce the battery usage time.)
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays the main on-screen menu.
Displays Favorite Channel Lists on the screen. (P. 12)
Press to display information on the TV screen. (P. 18)
Exits the menu.
Buttons used in the Channel list, Media Play menu, etc.
S.MODE: Selects the sound mode. (P. 17) SLEEP: Automatically shuts off the TV at a
preset time. (P. 18)
MTS: Press to choose stereo, mono or Separate
Audio Program (SAP broadcast). (P. 17)
P.MODE: Selects picture mode. (P. 13) P.SIZE: Choose the picture size. (P. 16) CC: Controls the caption decoder. (P. 20)
English
Installing batteries (Battery size: AAA)
6
NOTE
Use the remote control within 23 feet from the TV.
x
Bright light may affect the performance of the remote
x
control. Avoid use when nearby fluorescent lights or neon signs.
The color and shape may vary depending on the model.
x
Connecting to an Antenna
P
POWER
INFO
CH LIST
When the TV is initially powered on, basic settings proceed automatically.
Connecting the mains and antenna.
01 Getting Started
VHF/UHF Antenna
or
Power Input
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the red button.
Selecting a language
1
Selecting Store Demo
2
or Home Use
Selecting an antenna
3
Selecting a channel The channel search will start automatically.
4
Setting the Clock
5
Mode
Viewing the HD
6
Connection Guide Enjoy your TV.
Press the or button, then press the ENTERE button. Select the desired OSD (On Screen Display) language.
Press the or button, then press the ENTERE button.
Select the y Home Use mode. Store Demo Mode is for retail environments.
To return the unit’s settings from y Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume in the OSD, press and hold MENU for 5 sec.
Press the or button, then press the ENTERE button. Select Air, Cable or Auto.
In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the , ▼, or button, then press the ENTERE button.
For more information, refer to Channel Auto Program. (P. 12)
Press the ENTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
If you select the Auto, set the daylight saving time. Select the time zone which you live.
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
Cable
ANT OUT
7
If You Want to Reset This Feature...
MENU
O m
Setup Plug & Play ENTER
E
Setup
Plug & Play
Time Menu Language : English Caption : On Security Network General
PIP : Off
English
7
R-AUDIO-L
P
R PB Y
P
R PB Y
R-AUDIO-L
P
R PB Y
WY
W Y
BGR
W
W
B
G
R
R
R
R
R
R-AUDIO-L
P
R PB Y
W W
BGRRWY
W W
BGRR
ConnectionsConnections
Connecting to an AV Device
Using an HDMI / DVI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD, Blu-ray player, HD cable box, HD satellite receiver (STB).
BD/DVD player/
HD cable/Sat. box
Red White
HDMI OUT
HDMI IN 1(DVI) , 2, 3, 4 / PC/DVI AUDIO IN
When using an HDMI/DVI cable connection, you must use the xHDMI IN 1(DVI) jack for video. A DVD, Blu-ray player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.
The picture may not display normally (if at all) or the audio may not work if an external device that uses an older
x
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may
x
occur.
Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
Device
DVI OUT
AUDIO OUT
8
VCR
English
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
For better picture quality, the
Component connection is recommended over the A/V connection.
Blu-ray player
Yellow Red White Red Blue Green
AUDIO OUT
COMPONENT OUT
VIDEO OUT
AUDIO OUT
Connecting to an Audio Device
R-AUDIO-L
P
R PB Y
W W
BGRR
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, Home Theater
02 Connections
AUDIO IN
DVD
Home Theater
Digital audio system
OPTICAL
Red White
DIGITAL AUDIO OUT (OPTICAL)
When a Digital Audio System is connected to the xDIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the
x
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.
AUDIO OUT : Connects to the audio input jacks on your amplifier/home theater.
When connecting, use the appropriate connector (sold separately).
x
When an audio amplifier is connected to the xAUDIO OUT jacks: Decrease the volume of the TV and adjust the volume level with the amplifier’s volume control.
Connecting to a PC
Using an HDMI/DVI Cable / a D-sub Cable
AUDIO OUT
DVI OUT
PC OUT
AUDIO OUT
English
9
Connections
P . SIZE
CH LIST
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920X1080@60Hz.
Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)
IBM
MAC
VESA CVT
VESA DMT
VESA GTF
VESA DMT / DTV CEA 1920 x 1080p 67.500 60.000 148.500 +/+
NOTE
For HDMI/DVI cable connection, you must use the xHDMI IN 1(DVI) jack. The interlace mode is not supported.
x
The set might operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
x
EX-LINK
640 x 350 31.469 70.086 25.175 +/­720 x 400 31.469 70.087 28.322 -/+ 640 x 480 35.000 66.667 30.240 -/­832 x 624 49.726 74.551 57.284 -/-
1152 x 870 68.681 75.062 100.000 -/-
720 x 576 35.910 59.950 32.750 -/+ 1152 x 864 53.783 59.959 81.750 -/+ 1280 x 720 56.456 74.777 95.750 -/+ 1280 x 960 75.231 74.857 130.000 -/+
640 x 480 31.469 59.940 25.175 -/-
640 x 480 37.861 72.809 31.500 -/-
640 x 480 37.500 75.000 31.500 -/-
800 x 600 37.879 60.317 40.000 +/+
800 x 600 48.077 72.188 50.000 +/+
800 x 600 46.875 75.000 49.500 +/+ 1024 x 768 48.363 60.004 65.000 -/­1024 x 768 56.476 70.069 75.000 -/­1024 x 768 60.023 75.029 78.750 +/+ 1152 x 864 67.500 75.000 108.000 +/+
1280 x 1024 63.981 60.020 108.000 +/+ 1280 x 1024 79.976 75.025 135.000 +/+
1280 x 800 49.702 59.810 83.500 -/+ 1280 x 800 62.795 74.934 106.500 -/+ 1280 x 960 60.000 60.000 108.000 +/+ 1280 x 720 45.000 60.000 74.250 +/+ 1360 x 768 47.712 60.015 85.500 +/+ 1440 x 900 55.935 59.887 106.500 -/+ 1440 x 900 70.635 74.984 136.750 -/+
1680 x 1050 65.290 59.954 146.250 -/+
1280 x 720 52.500 70.000 89.040 -/+
1280 x 1024 74.620 70.000 128.943 -/-
Connector for service only.
Input Cables (Sold Separately)
HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA
Changing the Input source
TV / AV1 / AV2 / Component1 / Component2 / PC / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB
You can only choose external devices that
Source List
MENU
O m
Use to select TV or an external input sources
Input Source List ENTER
E
are connected to the TV. In the Source List, connected inputs will be highlighted.
PC always stay activated.
such as a DVD / Blu-ray player / cable box / STB satellite receiver.
English
10
PRE-
CH
CH
VO
L
MENU
MUT
E
RETURN
C
H LI
ST
EXIT
C
MEDIA.P
F
A V .CH
TOOL
S
INFO
Edit Name
CH LIST
MENU
O m
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection
easier.
Input Edit Name ENTER
When a PC with a resolution of 1920 x 1080 @ 60Hz is connected to the HDMI IN 1(DVI) port, you should set to DVI PC mode under Edit Name.
When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set to DVI PC or DVI Devices mode under Edit Name.
E
Basic Features
03 Basic Features
How to Navigate Menus
Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.
1
2
3
1 MENU button: Displays the main on-screen menu. 2 ENTERE / Direction button: Move the cursor and
select an item. Confirm the setting.
3 RETURN button: Returns to the previous menu. 4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
The main menu options appear on the screen:
Picture, Sound, Channel, Setup, Input, Application, Support.
button.
E
Press ENTERE to access the sub-menu.
Select the desired submenu with the or button.
Adjust the value of an item with the or button. The adjustment in the OSD may differ depending on the selected menu.
E
Press ENTERE to confirm the selection.
Press EXIT.
MENU
m
1
▲ / ▼ Select an icon with the or
2
ENTER
3
▲ / ▼
4
◄ / ►
5
ENTER
6
EXIT
e
7
4
Channel Menu
Seeing Channels ¦
Channel List
MENU
O m
Add, delete or set Favorite channels and use the program guide for digital broadcasts.
Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by pressing the / buttons, and pressing the ENTERE button. Then you can watch the selected channel.
Added Channels
Air A Antenna B Zoom C Select Page T Tools
All Channels: Shows all currently available
Added Channels: Shows all added channels.
*
Favorite: Shows all favorite channels.
Programmed: Shows all currently reserved
Channel Channel List ENTER
6 Air
6-1 ♥ TV #6
7 Air
8 Air 9 Air
9-1 ♥ TV #9
10 Air
10-1 ♥ TV #10 11-1 ♥ TV #11
channels.
programs.
E
English
11
Basic Features
ABCD
P
POWER
FAV . CH
P . MODE
P . SIZE
MTS
INFO
SLEEP
CH LIST
Using the color buttons with the Channel List
Red (Antenna): Switches to Air or Cable.
x
Green (Zoom): Enlarges or shrinks a channel
x
number.
Yellow (Select): Selects multiple channel lists.
x
Select desired channels and press the Yellow button to set all the selected channels at the same time. The
c
mark appears to the left of the selected channels.
(Page): Move to next or previous page.
x
T x (Tools): Displays the Channel List option menu.
(The Options menus may differ depending on the situation.)
Channel Status Display Icons
Icons Operations
c
) (
A channel selected. A channel set as a Favorite.
*
A reserved Program. A program currently being broadcast.
Using Favorite Channels ¦
MENU
O m
*
Add to Favorite / Delete from Favorite
Set channels you watch frequently as Favorites.
1. Select a channel and press the TOOLS
button.
2. Add or delete a channel using the Add to Favorite or Delete from Favorite menu
respectively.
Added Channels
Air A Antenna B Zoom C Select Page T Tools
Channel Channel List ENTER
6 Air
6-1 ♥ TV #6
7 Air
8 Air 9 Air
9-1 ♥ TV #9
10 Air
10-1 ♥ TV #10 11-1 ♥ TV #11
Delete Add to Favorite Timer Viewing Channel Name Edit Select All
E
t
Memorizing channels ¦
MENU
O m
Antenna (Air / Cable)
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
Channel ENTER
t
E
Auto Program
Air : Air antenna signal. Cable : Cable antenna signal. Auto : Air and Cable antenna.
NOTE
When selecting the Cable TV system: Selects the
x
cable system. STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected.
After all the available channels are stored, it starts
x
to remove scrambled channels. The Auto program menu then reappears.
How to Stop Auto Programming
1. Press the ENTERE button.
2. A message will ask Stop Auto Program? Select Yes by
pressing the or button.
3. Press the ENTERE button.
Editing channels ¦
MENU
O m
Channel Name Edit
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Channel Name Edit
menu. Channel Name Edit (analog channels only): Assign your
own channel name.
Other Features ¦
Channel Channel List ENTER
t
E
English
12
MENU
O m
Channel ENTER
E
Clear Scrambled Channel
This function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.
How to Stop Searching Scrambled Channels
P . MODE
P . SIZE
INFO
CH LIST
1. Press the ENTERE button to select Stop.
2. Press the button to select Yes .
3. Press the ENTERE button.
This function is only available in Cable mode.
Channel List
MENU
O m
Channel List Option Menu
Set each channel using the Channel List menu options (Add/ Delete, Timer Viewing, Select All/ Deselect All). Option
menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings. Add / Delete : Delete or add a channel to display the
channels you want.
Timer Viewing : You can set a desired channel to be displayed automatically at the intended time. Set the current time first to use this function. (P. 18)
1. Press the / / / buttons to select the
2. Press the TOOLS button, then select Timer Viewing.
3. Scroll up or down to adjust the settings in the box,
4.
Select All : Select all the channels in the channel list. Deselect All : Deselect all the selected channels.
Channel Channel List ENTER
t
NOTE
All deleted channels will be shown on the xAll Channels menu.
A gray-colored channel indicates the channel
x
has been deleted. The xAdd menu only appears for deleted
channels. Delete a channel from the xAdded Channels or
Favorite menu in the same manner.
desired channel in Channel List.
or use the numeric buttons on your remote for entering the date and time.
If you selected Once, Every Week or Every Day in Repeat, you can enter the date you want.
Select OK, then press the ENTERE button when done.
NOTE
Only memorized channels can be reserved.
x
Reserved programs will be displayed in the
x
Programmed menu. When a digital channel is selected, press the
x
button to view the digital program.
You can only select Deselect All when one or more channels are selected.
Programmed
(in Channel List) You can view, modify or delete a show you have reserved to
watch.
1. Press the
2. Press the and button move to the Programmed
menu. Change Info : Change a show you have reserved to
E
watch. Cancel Schedules : Cancel a show you have reserved
to watch. Information : Display a show you have reserved
to watch. (You can also change the reservation Information.)
Select All / Deselect All: You can select or deselect all channels in the channel list.
ENTERE
button to select Channel List.
Fine Tune
(analog channels only) If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually.
Select y Fine Tune in the Channel menu. Fine tuned channels that have been saved are marked
with an asterisk “*” on the right-hand side of the channel number in the channel banner.
To reset the fine-tuning, select Reset.
Picture Menu
Changing the Preset Picture Mode ¦
MENU
O m
Mode
Select your preferred picture type by pressing the P.MODE button.
Dynamic : Suitable for a bright room. Standard : Suitable for a normal
environment.
Natural : Suitable for an eye comfortable display.
Movie : Suitable for watching movies in a dark room.
Picture Mode ENTER
t
Natural is not available in PC mode.
03 Basic Features
E
English
13
Basic Features
Adjusting picture settings ¦
MENU
O m
Picture Backlight ENTER
E
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality control.
NOTE
When you make changes to xBacklight, Contrast, Brightness, Sharpness, Color or Tint (G/R) the OSD will be adjusted accordingly.
In PC mode, you can only make changes to
x
Backlight, Contrast and Brightness. Settings can be adjusted and stored for each
x
external device connected to the TV. Lowering picture brightness reduces power
x
consumption.
Economical Solutions ¦
ECO Solution
MENU
O m
Energy Saving (Off / Low / Medium / High / Picture Off / Auto): This adjust the brightness of the TV in order
to reduce power consumption. If you select Picture Off, the screen is turned off , but the sound remains on.
Press any button to turn on the screen again.
Eco Sensor (Off / On) : To enhance your power savings; the picture settings will automatically adapt to the light in the room.
Min Backlight: When ECO sensor is On, the minimum screen brightness can be adjusted manually.
No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets how quickly the TV switches to standby
mode, if no picture is being received.
Picture ECO Solution ENTER
If you adjust the Backlight, the Eco Sensor will be set to Off.
If Eco Sensor is On, the display brightness may change (become slightly darker in most cases) depending on the surrounding light intensity.
Disabled when the PC is in power saving mode.
E
Setting up the TV with your PC ¦
Set the input source to PC.
Auto Adjustment
MENU
O m
ENTER
Adjust frequency values/positions and fine tune the settings automatically.
Not available when connecting through HDMI/DVI
cable.
Picture Auto Adjustment
E
t
Screen
Coarse / Fine : Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine­tune again. After the noise has been reduced, readjust the picture so that it is aligned to the center of screen.
Position : Adjust the PC’s screen positioning if it does not fit the TV screen. Press the or button to adjust the Vertical-Position. Press the or button to adjust the Horizontal-Position.
Image Reset : Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but the same basic set-up information will apply in most cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution) y [Optimum: 1920 X 1080 pixels]
If a vertical-frequency option exists on your display y settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.
14
English
Changing the Picture Options ¦
Advanced Settings
MENU
O m
ENTER
(available in Standard / Movie mode) Compared to previous models, new Samsung TVs have
more precise pictures.
In PC mode, you can only make changes to Dynamic Contrast, Gamma and White Balance.
Black Tone : Off
Dynamic Contrast : Medium Shadow Detail : 0 Gamma : 0 Expert Pattern : Off RGB Only Mode : Off Color Space : Native
Black Tone (Off / Dark / Darker / Darkest) : Select the black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High) : Adjust the screen contrast.
Shadow Detail : Increase the brightness of dark images.
Gamma : Adjust the primary color intensity. Expert Pattern (Off / Pattern 1 / Pattern 2): By
running the Expert Pattern function, the picture can be calibrated without a generator or filter. If the OSD menu disappears or a menu other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears.
RGB Only Mode (Off / Red / Green / Blue) : Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation.
Color Space (Auto / Native / Custom) : Adjust the range of colors available to create the image. To adjust Color, Red, Green, Blue and Reset, set Color Space to Custom.
White Balance : Adjust the color temperature for a more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's (red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color's (red, green, blue) brightness.
Reset: Resets the White Balance to it's default settings.
Picture Advanced Settings
E
Advanced Settings
U Move E Enter R Return
Disabled under PC mode.
While the Expert Pattern is running, sound is not output.
Only enabled on DTV / Component / HDMI.
10p White Balance (Off / On) : Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
Available when the picture mode is set to Movie and when the external input is set to all input.
Some external devices may not support this
function.
Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. Blue: Adjust the blue level. Reset: Resets the 10p White Balance to its default
settings.
Flesh Tone : Emphasize pink “Flesh Tone.” Edge Enhancement (Off / On) : Emphasize object
boundaries. xvYCC (Off / On) : Setting the xvYCC mode on
increases detail and color space when watching movies from an external device (e.g. DVD player) connected to the HDMI or Component IN jacks.
Available when the picture mode is set to Movie and when the external input is set to HDMI or Component.
Some external devices may not support this
function.
Picture Options
MENU
O m
ENTER
In PC mode, you can only make changes to the Color
Ton e, Size and Auto Protection Time.
Color Tone (Cool / Normal / Warm1 / Warm2)
Picture Picture Options
E
Picture Options
Color Tone : Normal
Size : 16:9 Digital Noise Filter : Auto MPEG Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off Auto Motion Plus : Standard
Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic. Settings can be adjusted and stored for each
external device connected to an input on the TV.
U Move E Enter R Return
English
03 Basic Features
15
Basic Features
P . SIZE
CH LIST
Size : Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification. Zoom2: Use for a stronger magnification. Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen. 4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are input.
NOTE
After selecting xZoom1, Zoom2 or Wide Fit:
1. Press the button to select Position.
2. Press the ENTERE button.
3. Press the or button to move the picture up
or down.
4. Press the ENTERE button.
5. Press the button to select Reset.
6. Press the ENTERE button to reset the picture
to its default position.
After selecting xScreen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you may need to center the picture:
1. Press the or button to select Position.
2. Press the ENTERE button.
3. Press the ▲, ▼, ◄ or button to move the
picture.
4. Press the ENTERE button.
5. Press the or button to select Reset.
6. Press the ENTERE button.
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
x
720p (1280x720) Settings can be adjusted and stored for each
x
external device you have connected to an input on the TV.
Input Source Picture Size
ATV, AV, Component (480i, 480p) DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p) PC 16:9, 4:3
16:9, Zoom1, Zoom2, 4:3
16:9, 4:3, Wide Fit, Screen Fit
Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualization): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may
appear on the screen.
When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels, displays signal strength.
Only available for analog channels.
When bar is green, you are receiving the best
possible signal.
MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide an improved
picture quality.
Disabled under PC mode.
HDMI Black Level (Normal / Low) : Selects the black level on the screen to adjust the screen depth.
Available only in HDMI mode.
Film Mode (Off / Auto1 / Auto2) : Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
Auto Motion Plus (Off / Clear / Standard / Smooth / Custom / Demo): Enhances motion in fast moving
scenes.
The info screen on your TV displays the resolution
and frequency of the incoming video signal (60Hz). This displayed frequency is not what the TV is displaying by using the Auto Motion Plus function.
Auto Protection Time (2 hours / 4 hours / 8 hours / 10 hours / Off): If the screen remains idle with a still
image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
16
English
SRS TheaterSound
P . MODE
P . SIZE
MTS
INFO
CH LIST
P . MODE
P . SIZE
MTS
INFO
CH LIST
P
POWER
FAV . CH
MEDIA.P
P . MODE
S.MODE
P . SIZE
CC
MTS
INFO
SLEEP
CH LIST
Equalizer
Adjusts the sound mode (standard sound mode only).
SRS TruSurround HD (Off / On)
(standard sound mode only) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology.
SRS TruDialog (Off / On)
(standard sound mode only) This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog canbe heard more clearly.
Sound Menu
Changing the Preset Sound Mode ¦
MENU
O m
ENTER
Standard : Selects the normal sound
mode.
Music : Emphasizes music over voices. Movie : Provides the best sound for
movies.
Clear Voice : Emphasizes voices over other sounds. Amplify : Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing impaired.
Sound SRS TheaterSound
E
t
Adjusting sound settings ¦
MENU
O m
Balance L/R : Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
Reset : Resets the equalizer to its default settings.
Sound Equalizer ENTER
E
Sound Systems, Etc. ¦
t
Preferred Language
(digital channels only) Digital-TV broadcasts are capable of
simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages).
You can only select a language among
the ones being broadcasted.
Multi-Track Sound (MTS)
(analog channels only)
Mono : Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
Stereo : Choose for channels that are broadcasting in stereo.
SAP : Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.
Depending on the particular program being
broadcasted, you can listen to Mono, Stereo or SAP.
t
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night : This mode provides an improved sound
experience compared to Normal mode, making almost no noise. It is useful at night.
Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.
When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.
When Speaker Select is set to External Speaker, you should use these settings.
TV Speaker: Off, External Speaker: On
x
When Speaker Select is set to TV Speaker, you should use these settings.
TV Speaker: On, External Speaker: On
x
If there is no video signal, both speakers will be mute.
03 Basic Features
English
17
Basic Features
P
POWER
P . MODE
P . SIZE
INFO
SLEEP
CH LIST
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.
Audio Format : During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.
By connecting to 5.1ch speakers in a dolby
digital setup, maximize your interactive 3D sound experience.
Audio Delay : Correct audio-video mismatch, when watching TV or video, and listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).
Sound Reset (On / Off)
Reset all sound settings to the factory defaults.
Setup Menu
Setting the Time ¦
MENU
O m
Setup Time ENTER
E
Time
The current time will appear every time you press the
INFO button.
Clock : Setting the clock is for using various timer
features of the TV.
If you disconnect the power cord, you have to set
the clock again.
Clock Mode: Set up the current time manually or automatically.
Auto : Set the current time automatically using the time from a digital channel.
The antenna must be connected in order to set
the time automatically.
Manual : Set the current time manually.
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.
Available only when Clock Mode is set to Manual.
You can set the month, day, year, hour and minute
directly by pressing the number buttons on the remote control.
DST (Off / On): Switches the DST(Daylight Saving Time) function on or off.
This function is only available when the Clock
Mode is set to Auto.
Time Zone: Select your time zone.
This function is only available when the Clock
Mode is set to Auto.
Using the Sleep Timer ¦
MENU
O m
ENTER
Sleep Timer
shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).
Setup Time Sleep Timer
E
t
To cancel the Sleep Timer, select
Off.
: Automatically
Setting the On/Off Timer ¦
MENU
O m
ENTER
Timer 1 / Timer 2 / Timer 3 : Three different on / off
timer settings can be made. You must set the clock first.
On Time
Off Time
Volume
Repeat
On Time / Off Time: Set the hour, minute, am/pm and activate/inactivate. (To activate the timer with the setting you have chosen, set to Activate.)
Volume: Set the desired volume level. Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select Air or Cable.
Setup Time Timer 1
E
Timer 1
Inactivate 12 00 am
Inactivate 12 00 am
Source
10 TV Air 3
Once
Sun Mon Tue Wed Thu Fri Sat
L Move U Adjust E Enter R Return
Antenna Channel
18
English
Channel (when the Source is set to TV): Select the desired channel.
Contents (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically.
If there is no music file on the USB device or the
folder containing a music file is not selected, the Timer function does not operate correctly.
When there is only one photo file in the USB, the
Slide Show will not play. A folder with too long of a name cannot be
selected. Each USB you use is assigned its own folder.
When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to activate the timer.
The
c
Auto Power Off (available only when the TV is turned
on by the Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.
mark indicates the day is selected.
Locking Programs ¦
MENU
O m
Setup Security ENTER
E
Security
The PIN input screen appears, Enter your 4 digit PIN number.
V-Chip : The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal identification number) before any of the V-Chip restrictions are set up or changed.
NOTE
V-Chip x is not available in HDMI, Component
or PC mode. The default PIN number of a new TV set is
x
“0-0-0-0”.
Allow all x: Press to unlock all TV ratings. Block all x: Press to lock all TV ratings.
V-Chip Lock (Off / On): You can block rated TV
Programs.
TV Parental Guidelines: You can block TV programs depending on their rating. This function allows you to control what your children are watching.
TV-Y : Young children / TV-Y7: Children 7 and over / TV-G: General audience / TV-PG: Parental guidance / TV-14: Viewers 14 and over / TV-MA: Mature
audience
ALL : Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation / L: Adult Language / D: Sexually Suggestive Dialog
The V-Chip will automatically block certain categories dealing with more sensitive material. For example, if you block the TV-Y category, then T V-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the young adult group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work similarly. So, if you block the L sub-rating in TV-PG, then the L sub-ratings in T V-14 and TV-MA will automatically be blocked.
MPAA Rating: You can block movies depending on their MPAA rating. The Motion Picture Association of America(MPAA) has implemented a rating system that provides parents or guardians with advanced information on which films are appropriate for children.
G : General audience (no restrictions). / PG: Parental guidance suggested. / PG-13: Parents strongly cautioned. / R: Restricted. Children under 17 should be accompanied by an adult. / NC-17: No children under age 17. / X: Adults only. / NR: Not rated.
The V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the PG -13 category, then R, NC-17 and X will automatically be blocked.
Canadian English: You can block TV programs depending on their Anglophone Canadian.
C : Programming intended for children under age 8. / C8+: Programming generally considered acceptable
for children 8 years and over to watch on their own. /
G: General programming, suitable for all audiences. / PG: Parental Guidance. / 14+: Programming
contains themes or content which may not be suitable for viewers under the age of 14. / 18+: Adult programming.
The V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the G category, then
PG, 14+ and 18+ will automatically be blocked.
03 Basic Features
English
19
Basic Features
MEDIA.P
P . MODE
P . SIZE
CC
MTS
INFO
CH LIST
Canadian French: You can block TV programs depending on their French Canadian rating.
G : General / 8 ans+: Programming generally considered acceptable for children 8 years and over to watch on their own. / 13 ans+: Programming may not be suitable for children under the age of 13. / 16 ans+: Programming is not suitable for children under the age of 16. / 18 ans+: Programming restricted to adults.
The V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the 8 ans+ category, then 13 ans+, 16 ans+ and 18 ans+ will automatically be blocked also.
Downloadable U.S. Rating: Parental restriction information can be used while watching DTV channels.
NOTE
If information is not downloaded from the
x
broadcasting station, the Downloadable U.S. Rating menu is deactivated.
Parental restriction information is automatically
x
downloaded while watching DTV channels. It may take several seconds.
The xDownloadable U.S. Rating menu is available for use after information is downloaded from the broadcasting station. However, depending on the information from the broadcasting station, it may not be available for use.
Parental restriction levels differ depending on
x
the broadcasting station. The default menu name and Downloadable U.S. Rating change depending on the downloaded information.
Even if you set the on-screen display to another
x
language, the Downloadable U.S. Rating menu will appear in English only.
The rating will automatically block certain
x
categories that deal with more sensitive material.
The rating titles (For example: Humor Level..etc)
x
and TV ratings (For example: DH, MH, H..etc) may differ depending on the broadcasting station.
Change PIN : The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the Confirm New PIN screen appears. Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been memorized.
How to watch a restricted channel
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear:
This channel is blocked by V-Chip. Please enter the PIN to unblock.
If you forget the PIN, press the remote-control
buttons in the following sequence, which resets the pin to “0-0-0-0” : POWER (off) MUTE 8 2 4 POWER (on)
Other Features ¦
MENU
O m
Setup ENTER
E
Menu Language
Set the menu language.
1. Select Menu Language and press the ENTERE button.
2. Choose desired language and press the ENTERE
button.
Choose between English, Español and Français.
Caption
(On-Screen Text Messages)
Caption (Off / On) : You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.
The Caption feature does not work in Component, HDMI or PC modes.
Caption Mode : You can select the desired caption mode.
The availability of captions depends on the
program being broadcasted.
Default / CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital channels only) The Digital Captions
function works with digital channels.
Se rvic e1~6 may not be available in digital caption
mode depending on the broadcast.
20
English
Digital Caption Options : (digital channels only) Size: Options include Default, Small, Standard and
Large. The default is Standard. Font Style: Options include Default and Styles 0 to 7.
The default is Style 0. Foreground Color: Options include Default, White,
Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letter. The default is White.
Background Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the caption. The default is Black.
Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing.
Background Opacity: This adjusts the opacity of the caption background. Options include Default, Transparent, Translucent, Solid and Flashing.
Return to Default: This option sets each Size, Font Style, Foreground Color, Background Color, Foreground Opacity and Background Opacity to its default.
NOTE
Digital Caption Options x are available only
when Default and Service1 ~ Service6 can be selected in Caption Mode.
The availability of captions depends on the
x
program being broadcasted. The xDefault setting follow the standards set by
the broadcaster. The Foreground and Background cannot be set
x
to have the same color. You cannot set both the xForeground Opacity
and the Background Opacity to Transparent.
Network
For details on set up options, refer to the “Network Connection” instructions. (P. 24~29)
General
Game Mode (Off / On) : When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game menu.
NOTE
Precautions and limitations for game mode
x
To disconnect the game console and connect – another external device, set Game Mode to Off in the setup menu.
If you display the TV menu in Game Mode, the screen shakes slightly.
Game Mode x is not available when the input source
is set to TV or PC. After connecting the game console, set xGame Mode
to On. Unfortunately, you may notice reduced picture qualit y.
If xGame Mode is On:
Picture mode is set to Standard and Sound mode is set to Movie.
Equalizer is not available.
BD Wise (Off / On) : Provides the optimal picture quality
for Samsung DVD, Blu-ray and Home Theater products which support BD Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution.
Available when connecting Samsung products
that support BD Wise through a HDMI cable.
Menu Transparency (Bright / Dark) : Set the Transparency of the menu.
Melody (Off / Low / Medium / High) : Set so that a melody plays when the TV is turned on or off.
NOTE
Only available when the Input source is set to TV.
x
To turn the melody off, set Melody to Off. The xMelody does not play.
When no sound is output from the TV because the
MUTE button has been pressed.
When no sound is output from the TV because the – volume has been reduced to minimum with the
VOL – button.
When the TV is turned off by Sleep Timer function.
03 Basic Features
English
21
Basic Features
Picture In Picture (PIP) ¦
t
PIP
MENU
O m
You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode.
NOTE
For PIP sound, refer to the xSound Select instructions.
If you turn the TV off while watching in PIP mode, the
x
PIP window will disappear. You may notice that the picture in the PIP window
x
becomes slightly unnatural when you use the main screen to view a game or karaoke.
While xV-Chip operation, the PIP function cannot be used.
PIP Settings
x
PIP (Off / On) : Activate or deactivate the PIP function. Air/Cable (Air / Cable) : Select either Air or Cable as the
input source for the sub-screen.
Channel : Select the channel for the sub-screen. Size ( Position (
sub-picture. Sound Select (Main / Sub) : You can choose the
desired sound (Main or Sub) in PIP mode.
Setup PIP ENTER
Main picture Sub picture Component1, Component2,
HDMI1/DVI, HDMI2, HDMI3, HDMI4, PC
Õ
/ Ã): Select a size for the sub-picture.
Ã
/ – / — / œ): Select a position for the
E
TV
Support Menu
MENU
O m
Support ENTER
E
Self Diagnosis
Picture Test : Use to check for picture problems. If the
problem continues to occur, check the Color pattern. Yes: If the test pattern does not appear or there is
noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance (1-800-SAMSUNG).
No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.
Sound Test : Use the built-in melody sound to check for sound problems.
If you hear no sound from the TV’s speakers,
before performing the sound test, make sure
Speaker Select is set to TV speaker in the Sound menu.
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.
Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for
assistance (1-800-SAMSUNG). No: If you can hear sound from the speakers, select No.
There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.
Signal Information (Digital channels only): An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.
Troubleshooting : If the TV seems to have a problem, refer to this description.
If none of these troubleshooting tips apply, contact
the Samsung customer service center.
22
English
Software Upgrade
Software Upgrade can be performed by network
connection or downloading the latest firmware from “www. samsung.com,” to a USB memory device.
Current Version - the software already installed in the TV.
Software is represented as ‘Year/Month/Day_Version’.
Software Upgrade
Current Version 2010/01/18_000001
By USB
By Online
Alternative Software - - - - / - - / - - _ -----
U
Move E Enter R Return
Installing the Latest Version
By USB : Insert a USB drive
containing the firmware upgrade file, downloaded from www.samsung.com, into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade.
USB Drive
or
TV Side Panel
By Online : Upgrade the software using the Internet.
First, configure your network. For detailed
procedures on using the Network Setup, refer to the “Network connection” instructions.
If the Internet connection does not operate
properly, the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade.
Alternative Software (backup): Displays the Software version downloaded through By Online. During the software upgrading, When the Upgrade will discontinue from last step, this function be activated.
HD Connection Guide
Refer to this information when connecting external devices to the TV.
Contact Samsung
View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software.
03 Basic Features
English
23
Advanced Features
Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.
Connecting to a Wired Network ¦
You can attach your TV to your LAN using cable in three ways:
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat y 5 cable. See the diagram below.
The Modem Port on the Wall
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected y to an external modem. Use Cat 5 cable for the connection. See the diagram below.
The Modem Port on the Wall
Modem Cable
Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN y port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.
The LAN Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
External Modem
(ADSL / VDSL / Cable TV)
(having DHCP server)
LAN Cable
LAN CableModem Cable
IP Sharer
LAN Cable
TV Rear Panel
TV Rear Panel
TV Rear Panel
LAN Cable
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you do not have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer.
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that
support DHCP also let you use Static IP addresses.
English
24
Network Setup (Auto)
Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps:
How to set up automatically
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the MENU button on your remote, use the or button to select Setup, and then press the ENTERE button.
3. Use the or button to select Network in the Setup menu, and then press the ENTERE button. The Network screen appears.
4. On the Network screen, select Network Type.
5. Set Network Type to Wired.
6. Select Network Setup. The Network Setup screen
appears.
Network Setup
Internet Protocol Setup : Auto
IP Address : Subnet Mask : Gateway :
DNS : Auto
DNS Server :
U Move E Enter R Return
Network Setup (Manual)
04 Advanced Features
Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The
Network connection values are displayed.
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 6 in the “How to set up
automatically” procedure.
2. Set Internet Protocol Setup to Manual.
3. Press the button on your remote to go to the first
entry field.
4. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your
remote to enter numbers and the arrow buttons to move from one entry field to another.
5. When done, press the RETURN button on your remote.
6. Select Network Test to check the Internet connectivity.
7. Set Internet Protocol Setup to Auto.
8. Auto acquires and enters the needed Internet values
automatically.
9. Wait two minutes, and then press the RETURN button
on your remote.
10. If the Network Function has not acquired the network connection values, go to the directions for Manual.
English
25
Advanced Features
Connecting to a Wireless Network ¦
To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV’s side panel USB jack. See the illustration below.
The LAN Port on
the Wall
Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts. com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung recommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.
NOTE
You must use the “Samsung Wireless LAN Adapter” ( WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless
x
network. Samsung Wireless LAN Adapter and the USB extension Cable are sold separately and are offered by select retailers,
x
Ecommerce sites and Samsungparts.com. To use a wireless network, your TV must be connected to a wireless IP sharer (either a router or a modem). If the
x
wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
x
is currently being used by another device nearby, this will result in interference and communication failure. If you apply a security system other than the systems listed below, it will not work with the TV.
x
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or
x
TKIPAES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications.
If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button
x
Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
Keep the Samsung Wireless LAN Adapter at a distance from the TV. If you watch the TV with the Adapter connected
x
nearby, images may appear corrupted for some channels. If your router, modem, or device is not certified, it may not connect to the TV via the “Samsung Wireless LAN Adapter.”
x
Connection Methods x: You can setup the wireless network connection on four ways.
PBC(WPS)
Auto Setup (Using the Auto Network Search function) – Manual SetupAd-Hoc
The Samsung Wireless LAN Adapter may not be recognized when using a connection via a USB hub or via a USB
x
extension cable other than the cable supplied.
Wireless IP sharer
(AP having DHCP Server)
Samsung Wireless
LAN Adapter
LAN Cable
TV Side Panel
or
26
English
Notice
The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter. In such a case, establish a connection using one of the following methods or connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference.
Method 1
Connect using the USB right angle adapter
To connect the Samsung Wireless LAN Adapter using the USB right angle adapter, follow these steps:
1. Connect the USB right angle adapter to the Samsung Wireless LAN Adapter.
2. Connect the other end of the right angle adapter to the
USB 1 (HDD) port.
Method 2
Connect via an extension cable
or
Network Setup (PBC(WPS))
How to set up using PBC(WPS)
If your router has a PBC(WPS) button, follow these steps:
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the MENU button on your remote, use the or button to select Setup, and then press the ENTERE button.
3. Use the or button to select Network in the Setup menu, and then press the ENTERE button.
4. On the Network screen, select Network Type.
5. Set Network Type to Wireless.
6. Select Network Setup. The Network Setup screen appears.
Network Setup
Select a network : Not Selected ►
Internet Protocol Setup : Auto
IP Address : Subnet Mask : Gateway :
DNS : Auto DNS Server :
A
PBC(WPS) U Move E Enter R Return
7. Press the Red button on your remote.
8. Press the PBC(WPS) button on your router within 2
minutes. Your TV player automatically acquires all the network setting values it needs and connects to your network.
9. After the network connection is set up, press the
RETURN button to exit the Network Setup screen.
04 Advanced Features
To reconnect the Samsung Wireless LAN Adapter using the extension cable, follow these steps:
1. Connect the extension cable to the USB 1 (HDD) port.
2. Connect the extension cable and Samsung Wireless LAN
Adapter.
3. Attach the Samsung Wireless LAN Adapter to the back of
the TV near the top, using double-sided adhesive tape.
Network Setup (Auto)
Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process.
English
27
Advanced Features
A B C D E F G H I J K L M N
O P Q R S T U
V W X Y Z
0~9
Security Key
0 entered
Number
Lower case
B
Delete Space
C
How to set up automatically
To set up the wireless connection automatically, follow these steps:
1. Follow Steps 1 through 6 in the “How to set up using
PBC(WPS)”. (P. 27)
2. Press the button to select Internet Protocol Setup, and then press the ENTERE button. Press the or button to select Auto, and then press the ENTERE button.
3. Press the button to go to Select a Network, and then press the ENTERE button. The Network function searches for available wireless networks. When done, it displays a list of the available networks.
4. In the list of networks, press the or button to select a network, and then press the ENTERE button.
If the AP is set to Hidden (Invisible), you have
to select Add Network and enter the correct Network Name (SSID) and Security Key to establish the connection.
5. If the Security/PIN pop-up appears, go to Step 6. If the Network Connecting Screen appears, go to Step 10.
6. Press the or button to select Security or PIN. For most home networks, you would select Security (for Security Key). The Security Screen appears.
Select a network
9. When done, press the Blue button on your remote. The
Network Connecting screen appears.
10. Wait until the connection confirmation message is displayed, and then press the ENTERE button. The
Network Setup screen re-appears.
11. To test the connection, press the RETURN button to
select Network Test, and then press the ENTERE button.
Network Setup (Ad-Hoc)
You can connect to a mobile device without an access point through the “Samsung Wireless LAN Adapter” by using a peer to peer network.
How to connect to new Ad-hoc
1. Follow Steps 1 through 6 in the “How to set up using
PBC(WPS)”. (P. 27)
2. Choose Select a network. A list of devices/networks appears.
3. While in the device list, press the Blue button on the remote.
The message "Ad-hoc is a direct WI-Fi
connection with cellphone or PC. The existing network system may have limited functionality. Do you want to change the network connection?" is displayed.
4. Input the generated Network Name (SSID) and Security Key into the device you want to connect.
7. On the Security screen, enter your network’s Pass
Phrase.
You should be able to find the Pass Phrase on
one of the set up screens you used to set up your router or modem.
8. To enter the Pass Phrase, follow these general
directions:
Press the number buttons on your remote to enter – numbers.
Use the direction buttons on your remote to move – from button to button on the Security Key screen.
Press the Red button to change case or display – symbols/characters.
To a enter letter or symbol, move to the letter or – symbol, and then press the ENTERE button.
To delete the last letter or number you entered, – press the Green button on your remote.
28
English
n Move E Enter R Return
How to connect an existing Ad-hoc device
1. Follow Steps 1 through 6 in the “How to set up using
PBC(WPS)”. (P. 27)
2. Choose Select a network. Then, the device list will be displayed.
3. Select the device you want in the Device list.
4. If security key was applied, input the security key.
If network does not operate normally, check
the Network Name (SSID) and Security Key again. An incorrect Security Key may cause a malfunction.
Network Setup (Manual)
If the other methods do not work, you need to enter the Network setting values manually.
Getting the Network Connection Values
To get the Network setting values on most Windows computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
2. In the pop-up menu, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support tab, click the Details button. The
Network settings are displayed.
How to set up manually
To enter the Network connection values manually, follow these steps:
1. Follow Steps 1 through 6 in the “How to set up using
PBC(WPS)”. (P. 27)
2. Press the button to select Internet Protocol Setup, and then press ENTERE button. Press the or button to select Manual, and then press ENTER button.
3. Press the button to go to the first entry field (IP Address).
4. Use the number buttons to enter numbers.
5. When done with each field, use the button to move
successively to the next field. You can also use the other arrow buttons to move up, down, and back.
6. Enter the IP Address, Subnet Mask, and Gateway values.
7. Press the or button to go to DNS.
8. Press the button to go to the first DNS entry field.
Enter the numbers as above.
9. When done, press the button to go to Select a Network. Select your network, and then press
ENTERE button.
10. Go to Step 4 in the "How to set up automatically" (P. 28),
and follow the directions from that point on.
E
04 Advanced Features
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect.
To resolve this problem, ask your ISP about the procedures required to connect devices other than a PC (such as your TV) to the Internet.
If your Internet service provider requires an ID or password to connect to the Internet, your TV may not be able to connect to the Internet. If this is the case, you must enter your ID or password when connecting to the Internet.
The Internet connection may fail because of a firewall problem. If this is the case, contact your Internet service
provider. If you cannot connect to the Internet even after you have
followed the procedures of your Internet service provider, please contact Samsung Electronics at 1-800-SAMSUNG.
English
29
Advanced Features
CHLIST
MEDIA.P
P . SIZE
SUM
Media Play
Enjoy photos, music and/or movie files saved on a USB Mass Storage Class (MSC) device and/or your PC.
MENU
O m
ENTER
Application Media Play
E
MediaPlay
Videos
Change Device
View Devices E Enter R Return
Connecting a USB Device ¦
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie files to the
USB 1 (HDD) or USB 2 jack on the side of the TV.
3. When USB is connected to the TV, popup window appears. Then you can select Media Play.
USB Drive
or
TV Side Panel
Connecting to the PC through network ¦
You can play pictures, music and videos saved on your PC or on your TV through a network connection in the Media Play mode.
If you want to use Media Play to play files saved on your PC over your TV, you should download “PC Share Manager” and users manual from “www.samsung.com.”
LAN
PC
TV Side Panel
or
Samsung
Wireless
External Modem
(ADSL/VDSL/Cable TV)
LAN
Adapter
Wireless IP
LAN Cable
1. For more information on how to configure your network, refer to ‘Network Connection’.
You are recommended to locate both TV and PC in same subnet. The first 3 parts of the subnet address of the TV and – the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address:
123.456.789.**)
2. Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager program will be installed.
You can connect the TV to the PC directly without connecting it through a Sharer (Router).
30
English
Modem Cable
LAN CableLAN Cable
LAN Cable
sharer
Loading...
+ 74 hidden pages