Samsung LC49HG90DMUXEN User Manual

USER MANUAL

Gaming Monitor

C49HG90DM*

The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.

The contents of this manual are subject to change without notice to improve quality.

Samsung Electronics owns the copyright for this manual.

Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.

Trademarks other than that of Samsung Electronics are owned by their respective owners.

• An administration fee may be charged if either

‒ (a) an engineer is called out at your request and there is no defect in the product

(i.e. where you have failed to read this user manual).

‒ (b) you bring the unit to a repair center and there is no defect in the product

(i.e. where you have failed to read this user manual).

• The amount of such administration charge will be advised to you before any work or home visit is carried out.

Table of contents

Before Using the Product

Securing the Installation Space 4

Precautions for storage 4

Safety Precautions 4

Symbols 4 Cleaning 5 Electricity and Safety 5 Installation 6 Operation 7

Preparations

Parts 9

Control Panel 9 Function Key Guide 10 Game Setting Key 11 Changing Brightness, Contrast and Sharpness

settings 12 Changing the Volume setting 12 Reverse Side 13 Upgrading the Software via USB 14 Adjusting the Product Tilt and Height 16 Anti-theft Lock 17

Connecting and Using a Source Device

Pre-connection Checkpoints 21

Connecting and Using a PC 21

Connection Using the HDMI Cable 21 Connection Using the DP Cable 21 Connection Using the MINI DP Cable 22 Connecting to Headphones 22 Connecting to Microphone 22 Connection Using the Audio Cable 22

Connecting the Product to a PC as a USB HUB 23

Connecting a PC to the Product 23 Utilizing the Product as a USB HUB 23 Connecting the Power 24 Tidying Up the Connected Cables 25

Correct posture to use the product 26

Driver Installation 26

Setting Optimum Resolution 26

Game

Picture Mode 27

Refresh Rate 28

Black Equalizer 28

Response Time 28

FreeSync 29

Low Input Lag 30

Screen Size 30

Save Settings 31

Picture

Picture Mode 32

Brightness 33

Contrast 33

Sharpness 33

Color 33

Installation 18

Attaching the Stand 18 Removing the Stand (For Attaching the BRACKET

WALL) 19 Attaching the BRACKET WALL 20

HDMI Black Level 34

Eye Saver Mode 34

Screen Adjustment 34

PBP 35

PBP Mode 35 Aspect Ratio 36

Table of contents

Screen1 36 Screen2 36 Sound Source 36

OnScreen Display

Language 37

Display Time 37

System

Lighting 38

Local Dimming 38

Volume 38

Eco Saving Plus 39

Off Timer 39

PC/AV Mode 39

Reset All 40

Information 41

Installing the Software

Easy Setting Box 43

Restrictions and Problems with the Installation 43 System Requirements 43

Troubleshooting Guide

Requirements Before Contacting Samsung Customer Service Center 44

Testing the Product 44 Checking the Resolution and Frequency 44 Check the following. 44

Q & A 46

Appendix

Responsibility for the Pay Service (Cost to Customers) 50

Not a product defect 50 A Product damage caused by customer's fault 50 Others 50

USB Super Charging 39

DisplayPort Ver. 40

HDMI Mode 40

Source Detection 40

Key Repeat Time 40

Power LED On 40

Specifications

General 47

Standard Signal Mode Table 48

Chapter 01

Before Using the Product

Securing the Installation Space

Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product.

―

The exterior may differ depending on the product.

10 cm (3.93 Inches)

Precautions for storage

High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby.

―

Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product (Service fee will be charged.)

10 cm (3.93 Inches)

Safety Precautions

Caution

Symbols

Warning

Caution

RISK OF ELECTRIC SHOCK DO NOT OPEN

Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)

THERE ARE NO USER SERVICEABLE PARTS INSIDE.

REFER ALL SERVICING TO QUALIFIED PERSONNEL.

This symbol indicates that high voltage is present inside.

It is dangerous to make any kind of contact with any internal part of this product.

This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

A serious or fatal injury may result if instructions are not followed.

Personal injury or damage to properties may result if instructions are not followed.

Cleaning

―

Take the following steps when cleaning.

Power off the product and computer.

Disconnect the power cord from the product.

―

Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result.

Wipe the monitor with a clean, soft and dry cloth.

‒ Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.

‒ Do not spray water or detergent directly on the product.

Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.

Connect the power cord to the product when cleaning is finished.

Power on the product and computer.

Electricity and Safety

Warning

• Do not use a damaged power cord or plug, or a loose power socket.

• Do not use multiple products with a single power socket.

• Do not touch the power plug with wet hands.

• Insert the power plug all the way in so it is not loose.

• Connect the power plug to a grounded power socket (type 1 insulated devices only).

• Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy object.

• Do not place the power cord or product near heat sources.

• Clean any dust around the pins of the power plug or the power socket with a dry cloth.

Caution

• Do not disconnect the power cord while the product is being used.

• Only use the power cord provided with your product by Samsung. Do not use the power cord with other products.

• Keep the power socket where the power cord is connected unobstructed.

‒ The power cord must be disconnected to cut off power to the product when an issue occurs.

• Hold the plug when disconnecting the power cord from the power socket.

Installation

Warning

• DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.

• Do not install the product in poorly ventilated spaces such as a bookcase or closet.

• Install the product at least 10cm away from the wall to allow ventilation.

• Keep the plastic packaging out of the reach of children.

‒ Children may suffocate.

• Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.)

‒ The product may fall and become damaged and/or cause an injury.

‒ Using the product in an area with excess vibration may damage the product or cause a fire.

• Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.

• Do not expose the product to direct sunlight, heat, or a hot object such as a stove.

‒ The product lifespan may be reduced or a fire may result.

• Do not install the product within the reach of young children.

‒ The product may fall and injure children.

• Edible oil, such as soybean oil, can damage or deform the product. Do not install the product in a kitchen or near a kitchen counter.

Caution

• Do not drop the product while moving.

• Do not set down the product on its front.

• When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.

‒ The product may fall and become damaged and/or cause an injury.

‒ Install the product only on cabinets or shelves of the right size.

• Set down the product gently.

‒ Product failure or personal injury may result.

• Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.

‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a

place.

Operation

Warning

• There is a high voltage inside the product. Never disassemble, repair or modify the product yourself.

‒ Contact Samsung Customer Service Center for repairs.

• To move the product, first disconnect all the cables from it, including the power cable.

• If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord immediately and contact Samsung Customer Service Center.

• Do not let children hang from the product or climb on top of it.

‒ Children may become injured or seriously harmed.

• If the product is dropped or the outer case is damaged, turn off the power and disconnect the power cord. Then contact Samsung Customer Service Center.

‒ Continued use can result in a fire or electric shock.

• Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product.

‒ The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a

serious injury.

• During a lightning or thunderstorm, power off the product and remove the power cable.

• Do not drop objects on the product or apply impact.

• Do not move the product by pulling the power cord or any cable.

• If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.

• Do not lift or move the product by pulling the power cord or any cable.

• Do not use or keep combustible spray or an inflammable substance near the product.

• Ensure the vents are not blocked by tablecloths or curtains.

‒ An increased internal temperature may cause a fire.

• Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper, matches, etc) into the product (via the vent or input/output ports, etc).

‒ Be sure to power off the product and disconnect the power cord when water or other foreign

substances have entered the product. Then contact Samsung Customer Service Center.

• Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.

‒ Be sure to power off the product and disconnect the power cord when water or other foreign

substances have entered the product. Then contact Samsung Customer Service Center.

Caution

• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.

‒ Activate power-saving mode or a moving-picture screen saver if you will not be using the product

for an extended period of time.

• Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).

‒ Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.

• Use the product at the recommended resolution and frequency.

‒ Your eyesight may deteriorate.

• Do not hold the product upside-down or move it by holding the stand.

‒ The product may fall and become damaged or cause an injury.

• Looking at the screen too close for an extended period of time can deteriorate your eyesight.

• Do not use humidifiers or stoves around the product.

• Rest your eyes for more than 5 minutes or look at distance objects for every 1 hour of product use.

• Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.

• Store small accessories out of the reach of children.

• Exercise caution when adjusting the product angle or stand height.

‒ Your hand or finger may get stuck and injured.

‒ Tilting the product at an excessive angle may cause the product to fall and an injury may result.

• Do not place heavy objects on the product.

‒ Product failure or personal injury may result.

• When using headphones or earphones, do not turn the volume too high.

‒ Having the sound too loud may damage your hearing.

• Do not drop the product while moving.

‒ Product failure or personal injury may result.

Chapter 02

Preparations

Parts

Control Panel

―

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

Power LED

Return

Function Key Guide

LEFT

Game Setting Key

DOWN(FRONT)

RIGHT

PRESS(ENTER)

Parts Description

Multi directional button that helps navigate.

JOG Button

Power LED

Function Key Guide

Game Setting Key

―

The JOG button is located at the bottom right side of the screen and has 5 directions of UP, DOWN, LEFT, RIGHT, and PRESS (ENTER).

This LED is power status indicator and works as

• Power On (Power button): Off

• Power saving mode: Blinking

• Power Off (Power button): On

―

The power Indicator operation can be swapped by changing in the menu. (System → Power LED On) Actual models because of functional variation maybe haven’t this function.

Press the JOG button when the screen is turned on. The Function Key Guide will appear. To access the onscreen menu when the guide is displayed, press the corresponding direction button again.

―

Function Key Guide may vary depending on the function or product model. Please refer to the actual product.

Use shortcut keys to access previously saved custom game modes.

• Game Setting 1 / Game Setting 2 / Game Setting 3

―

The Game Setting Keys are located at the bottom right on the front of the monitor. To edit and save a custom game mode, go to Game → Save

Settings.

UP(REAR)

JOG Button

Function Key Guide

―

To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again.

UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes.

PRESS(ENTER): The selected item will be applied.

Icons Description

Source

PBP

Power Off

―

Actual models because of functional variation, Function key guide options will be different.

Selects by moving the JOG button in the function key guide screen.

The OSD (On Screen Display) of your Monitor’s feature appears.

Selects to change the input signal by moving the JOG button in the Function Key Guide screen. A message will appear on the top left corner of the screen if the input signal has been changed.

Selects by moving the JOG button in the function key guide screen.

Press the button when configuring settings for the PBP function is required.

Selects to turn the Monitor off by moving the JOG button in the function key guide screen.

Return

When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below.

JOG Button Power saving/Non-signal mode

UP Source Change

Down

PRESS(ENTER) for 2 seconds Power Off

When the monitor displays the Main menu the JOG Button could be used as below.

JOG Button Action

UP/DOWN Move the option

Exit the Main menu.

LEFT

RIGHT

PRESS(ENTER)

Close Sublist without saving value.

Value decreases in the slider.

Move to next depth.

Value increases in the slider.

Move to next depth.

Save the value and close Sublist.

Game Setting Key

You can quickly view the setting with a shortcut key at the bottom without using an OSD menu. You can directly see the settings for three different modes.

• Game Setting 1 / Game Setting 2 / Game Setting 3

Game Setting 3 Game Setting 2

Game Setting 1

Black Equalizer Response Time Refresh Rate FreeSync Low Input Lag

Game Setting 1

120

Picture Mode: Custom

Off On

―

The displayed image may differ depending on the model.

―

The displayed images reflect the status of the functions as the settings in OSD of the corresponding functions other than the real-time values.

―

This menu is not available when PBP is enabled.

Changing Brightness, Contrast and Sharpness settings

Changing the Volume setting

You can adjust Brightness, Contrast or Sharpness by moving the JOG button up or down, if no OSD menu is displayed.

Sharpness

Brightness

Contrast

―

The displayed image may differ depending on the model.

Brightness

―

This menu is not available when Eco Saving Plus is enabled.

―

This menu is not available when Eye Saver Mode is enabled.

Contrast

―

This menu is not available when Picture Mode is set to Cinema mode.

Sharpness

―

This menu is not available when Picture Mode is set to Cinema mode.

100

You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed.

Volume

―

The displayed image may differ depending on the model.

―

If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute the sound or cause choppy audio when applying the headphones or speakers. Set the input volume for the input device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on the product.

―

What is Auto Mute? The function mutes the audio to improve sound effect when there is sound noise or when the input signal

is weak, usually due to a problem with the volume of an input device.

―

To activate the Mute function, access the Volume control screen, then use the JOG button to move the focus down. To deactivate the Mute function, access the Volume control screen, then increase or decrease the Volume.

Mute

MINI DP IN

/SERVICE

MIC IN

MIC OUT

(PC IN)

Reverse Side

―

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

Port Description

Connect the power cord for your monitor to the POWER IN port on the back of the product.

POWER IN

Connects to a source device using an HDMI cable or HDMI-DVI cable.

HDMI IN 1

HDMI IN 2

Connects to a PC using a DP cable.

DP IN

Connects to a PC using a MINI DP cable.

Connect to an audio output device such as headphones.

Dedicated to service technicians.

Connect to a microphone.

Connect to a PC.

POWER IN

MINI DP IN

Port Description

Connect to a USB device.

―

Super charging is possible using the

1 2

devices faster than typical USB port. The speed depends on the connected devices.

Connects to a PC using a USB cable. Compatible with a USB cable version

3.0 or lower.

―

This port can only connect to a PC.

/SERVICE

MIC IN

MIC OUT

1 2

port only. This port charges

(PC IN)HDMI IN 1 HDMI IN 2 DP IN

Upgrading the Software via USB

Be sure to insert the USB disk into the USB 1 port. You can upgrade the software via USB only if either

the monitor screen operates normally or the check signal is displayed on the monitor screen.

USB 1

When the message as shown in the following figure is displayed on the monitor, select Yes to

upgrade the software.

MINI DP IN

When the screen as shown in the following figure is displayed, press and hold the Down arrow key for 5 seconds.

/SERVICE

MIC IN

MIC OUT

1 2

Check Signal Cable

DisplayPort

(PC IN)HDMI IN 1 HDMI IN 2 DP IN

When the screen as shown in the following figure is displayed, select Yes.

The software upgrading proceeds.

Power Off

Note

The supported USB disk formats are FAT, FAT32, and NTFS.

For the CHG90 model, make sure that each upgrade file is a BIN format file, follows the CHG90 model

naming rule (m-HG949CCAA-****.*[4 digits].bin, where ****.* is a version number, and 4 digits are a checksum. For example, “m-HG949CCAA-1000.0[6E80].bin” complies with the naming rule for the CHG90 model.), and must be copied to the root directory.

Make sure that the USB disk only contains one upgrade file for each model, and then follow the

instructions in this guide.

If you want to revert or downgrade to a lower version, change the file name as

m-HG949CCAA-0000.0[4 digits], and then take the same steps.

If the No valid update files found. Please check your USB device and try again. message is displayed,

this is probably due to the following reasons.

‒ No USB disk is inserted into the USB 1 port.

‒ The USB disk format is not supported.

‒ The USB disk contains no valid upgrade files. (No upgrade files exist, or the file names are

incorrect.)

Do not turn off the monitor. And prevent the upgrading from any interruption as far as possible. If an

interruption happens, the monitor will return to the production version.

―

Note that the production version may not be the same as the version before this upgrading if some other upgrading has been done earlier.

+ 35 hidden pages