C24B550U / C24B750X / C27B750X
User Manual
The color and the appearance may differ depending on the product, and the specications are subject to change
without prior notice to improve the performance.
BN46-00219A-05
Table of
Chapter. 1
BEFORE USING THE
Chapter. 3
USING SMART STATION
Contents
PRODUCT
5 Copyright
6 Securing the Installation Space
6 Safety Precautions
6 Symbols
7 Cleaning
7 Electricity and Safety
8 Installation and Safety
9 Operation and Safety
12 Correct posture to use the product
Chapter. 2
PREPARATION
13 Unpacking the Smart Station
13 Removing the Packaging
14 Checking the Components
15 Parts
15 Front Buttons
16 Rear View
17 Side
18 Adjusting the Product Tilt
19 What is Smart Station?
20 Read the Following before Using
the Wireless Connection / USB Hub
Functions
21 Software Installation for Using
Smart Station
21 Automatic installation when using a
notebook PC
22 Automatic installation when using a
desktop PC
24 Reinstall and Update
24 Connecting a PC to the Smart
Station Monitor (Product)
25 Connecting to a PC Using the Wireless-
connection Dongle - for Series 7 Only
29 Connecting to a PC Using a USB Cable
31 Monitor IP Setup
31 Dynamic IP
32 Static IP
34 What is Mobile Control?
34 Using Mobile Control (Sharing Your
Keyboard/Mouse)
Chapter. 4
USING MHL
42 MHL(MobileHigh-DenitionLink)
43 Using MHL
44 Disabling MHL
2
Chapter. 5
Chapter. 7
Chapter. 9
CONNECTING AND USING A
SOURCE DEVICE
45 Checklist before Connecting to
Source Devices
45 Pre-connection Checkpoints
45 Connecting the Power
46 Connecting and Using a PC
46 Connecting to a PC
47 Driver Installation
48 Setting Optimum Resolution
48 Changing the Resolution Using a PC
50 Connecting to a Video Device
50 Connecting to an Audio Output
Device
Chapter. 6
SCREEN SETUP
51 MAGIC
51 SAMSUNG MAGIC Bright
52 SAMSUNG MAGIC Color
53 Brightness
53 Conguring Brightness
53 Contrast
53 Conguring Contrast
54 Sharpness
54 Conguring Sharpness
54 Response Time
54 Conguring Response Time
55 HDMI Black Level
55 Conguring HDMI Black Level
CONFIGURING THE TINT
SETTINGS
56 Red
56 Conguring Red
57 Green
57 Conguring Green
57 Blue
57 Conguring Blue
58 Color Tone
58 Conguring Color Tone
58 Gamma
58 Conguring Gamma
Chapter. 8
RESIZING OR RELOCATING
THE SCREEN
59 Image Size
59 Conguring Image Size
60 H-Position
60 Conguring H-Position
60 V-Position
60 Conguring V-Position
61 Menu H-Position
61 Conguring Menu H-Position
61 Menu V-Position
61 Conguring Menu V-Position
SETUP AND RESET
62 HUB
62 Auto Wireless Detection - for Series 7
only
63 USB Super Charging
63 Select Source
64 Wireless ID - for Series 7 only
64 Eco Saving
64 Conguring Eco Saving
65 Menu Transparency
65 Conguring Menu Transparency
65 Language
65 Conguring Language
66 PC/AV Mode
66 Conguring PC/AV Mode
66 Auto Source
66 Conguring Auto Source
67 Display Time
67 Conguring Display Time
67 Key Repeat Time
67 Conguring Key Repeat Time
68 Off Timer On/Off
68 Conguring Off Timer On/Off
68 Off Timer Setting
68 Conguring Off Timer Setting
69 Reset
69 Restoring the default settings (Reset)
3
Chapter. 10
Chapter. 12
INFORMATION MENU AND
OTHERS
70 INFORMATION
70 Viewing information (INFORMATION)
70 ConguringBrightnessandContrast
in the Initial Screen
71 ConguringVolumeintheInitial
Screen
71 ConguringHUBintheInitial
Screen
Chapter. 11
TROUBLESHOOTING GUIDE
72 Requirements Before Contacting
Samsung Customer Service Center
72 Testing the Product
72 Checking the Resolution and Frequency
72 Check the following.
74 Troubleshooting Guide
74 The Wireless Connection screen - for
Series 7 only
74 USB screen
74 Mobile Control and MHL
75 Q & A
SPECIFICATIONS
77 General
78 Wireless transmitter/receiver - for Series
7 only
78 PowerSaver
79 Preset Timing Modes
79 Specicationsofthedonglethat
connects to a PC - for Series 7 only
Chapter. 13
APPENDIX
80 Contact SAMSUNG WORLDWIDE
84 Responsibility for the Pay Service
(Cost to Customers)
85 Correct Disposal
85 Terminology
85 OSD(On Screen Display)
85 HUB
85 Wireless-connection dongle - for Series 7
only
85 Gamma
86 Grey scale
86 Scanning rate
86 Horizontal Frequency
86 Vertical Frequency
86 Resolution
86 Plug & Play
86 MHL (Mobile High-Denition Link)
4
Chapter. 1
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2012 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
®
Microsoft
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
and Windows are registered trademarks of Microsoft Corporation.
Ownership of all other trademarks is attributed to their due owner.
• An administration fee may be charged if either.
◦ (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
◦ (b) you bring the unit to a repair center and there is no defect in the product
(i.e. where you have failed to read this user manual).
• The amount of such administration charge will be advised to you before any work or
home visit is carried out.
5
Before Using the Product
Securing the Installation Space
Ensure some space around the product for ventilation. An internal temperature rise may cause
re and damage the product. Be sure to allow the amount of space as shown below or greater
when installing the product.
The exterior may differ depending on the product.
10 cm
10 cm
10 cm 10 cm
10 cm
Precautions for storage
High-glossy models can develop white stains on the surface if an ultrasonic wave humidier is
used nearby.
Contact your nearest Samsung Customer Service Center if you want to clean the inside of
the product (Service fee will be charged.)
Safety Precautions
Caution
Do not open the cover. You may suffer an electric shock.
The components inside this product must not be repaired by home users.
Contact a technician for repair.
Symbols
Warning
Caution
A serious or fatal injury may result if instructions are not followed.
Personal injury or damage to properties may result if instructions are
not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
6
Before Using the Product
!
!
!
Cleaning
The following images are for reference only. Real-life situations may differ from what is
shown in the images.
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the product.
2. Remove the power cable from the product.
NOTE
Hold the power cable by the plug and do not touch the cable with wet hands.
Otherwise, an electric shock may result.
3. Wipe the product screen using a clean, soft and dry cloth.
-
Do not use detergents that contain alcohol, solvent or surface-active
agents.
-
Do not spray water or detergent directly on the product.
4. To clean the exterior of the product, use a moist soft cloth and wring
thoroughly before wiping the exterior.
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is
shown in the images.
Warning
Do not use a damaged power cable or plug, or a loose power socket.
-
An electric shock or re may result.
Do not use multiple products with a single power socket.
-
Otherwise, the socket may cause a re.
Do not touch the power cable with wet hands.
Otherwise, an electric shock may result.
Insert the power cable all the way in so it is not loose.
-
An unsecure connection may cause a re.
5. After cleaning the product, connect the power cable to the product.
6. Power on the product to use it.
Be sure to plug the power cable into a grounded power socket. (type 1
insulated devices only).
-
An electric shock or injury may result.
7
Before Using the Product
!
!
!
!
!
!
Caution
Do not bend or pull the power cable with force. Also, do not place a heavy
object on the power cable.
-
Damage to the cord may result in a re or electric shock.
Do not place the power cable or product near heat sources.
-
A re or electric shock may result.
Clean any dust around the pins of the power cable or the power outlet
using a dry cloth.
-
A re may result.
Do not disconnect the power cable while the product is being used.
-
The product may become damaged by an electric shock.
Only use the power cable provided with your product by Samsung. Do not
use the power cord with other products.
-
A re or electric shock may result.
Keep the power socket where the power cable is connected unobstructed.
-
In the event of a problem with the product, you must disconnect the
power cable to cut the power supply to the product.
Installation and Safety
The following images are for reference only. Real-life situations may differ from what is
shown in the images.
Warning
DO NOT PLACE CANDLELS, INSECT REPELLANTS OR CIGARETTES ON TOP
OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
-
A re may resullt.
Do not install the product in poorly ventilated spaces such as a bookcase or
closet.
-
An increased internal temperature may cause a re.
Keep the plastic packaging out of the reach of children.
-
Children may suffocate.
Do not install the product on an unstable or vibrating surface (insecure
shelf, sloped surface, etc.)
-
The product may fall and become damaged and/or cause an injury.
-
Using the product in an area with excess vibration may damage the
product or cause a re.
Do not install the product in a vehicle or a place exposed to dust, moisture
(water drips, etc.), oil, or smoke.
-
A re or electric shock may result.
Hold the plug when disconnecting the power cable from the power socket.
-
A re or electric shock may result.
8
Before Using the Product
!
!
SAMSUNG
!
!
!
Caution
Do not expose the product to direct sunlight, heat, or a hot object such as
a stove.
The product lifespan may be reduced or a re may result.
Do not install the product within the reach of young children.
The product may fall and injure children.
Edible oil, such as soybean oil, can damage or deform the product. Do not
install the product in a kitchen or near a kitchen counter.
Do not drop the product while moving.
-
Product failure or personal injury may result.
Do not set down the product on its front.
-
The screen may become damaged.
Installing the product in an unusual place (a place exposed to a lot of ne
particles, chemical substances or extreme temperatures, or an airport
or train station where the product should operate continuously for an
extended period of time) may seriously affect its performance.
-
Be sure to consult Samsung Customer Service Center if you want to
install the product at such a place.
Operation and Safety
The following images are for reference only. Real-life situations may differ from what is
shown in the images.
Warning
There is a high voltage inside the product. Never disassemble, repair or
modify the product yourself.
-
A re or electric shock may result.
-
Contact Samsung Customer Service Center for repairs.
Before moving the product, turn off the power switch and disconnect the
power cable and all other connected cables.
-
Damage to the cord may result in a re or electric shock.
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cable immediately and contact Samsung Customer
When installing the product on a cabinet or shelf, make sure that the
bottom edge of the front of the product is not protruding.
-
The product may fall and break or cause a personal injury.
-
Install the product only on cabinets or shelves of the right size.
Set down the product gently
-
Product failure or personal injury may result.
Service Center.
-
An electric shock or re may result.
Do not let children hang from the product or climb on top of it.
-
Children may become injured or seriously harmed.
9
Before Using the Product
!
!
!
GAS
!
100
If the product is dropped or the outer case is damaged, turn off the power
switch and disconnect the power cable. Then contact Samsung Customer
Service Center.
-
Continued use can result in a re or electric shock.
Do not leave heavy objects or items that children like (toys, sweets, etc.)
on top of the product.
-
The product or heavy objects may fall as children try to reach for the
toys or sweets resulting in a serious injury.
If there is a thunderstorm or lightning strike, turn off the power and
disconnect the power cable.
-
A re or electric shock may result.
Do not drop objects on the product or apply impact.
-
A re or electric shock may result.
Do not pull on the product holding only the power cable or any other cable.
-
Product failure, an electric shock or re may result from a damaged
cable.
If a gas leakage is found, do not touch the product or power cable. Also,
ventilate the area immediately.
-
Sparks can cause an explosion or re.
Do not use or keep combustible spray or an inammable substance near
the product.
-
An explosion or re may result.
Ensure the vents are not blocked by tablecloths or curtains.
-
An increased internal temperature may cause a re.
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects
that burn easily (paper, matches, etc) into the product (via the vent or
input/output ports, etc).
-
Be sure to power off the product and disconnect the power cable when
water or other foreign substances have entered the product. Then
contact Samsung Customer Service Center.
-
Product failure, an electric shock or re may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
-
Be sure to power off the product and disconnect the power cable when
water or other foreign substances have entered the product. Then
contact Samsung Customer Service Center.
-
Product failure, an electric shock or re may result.
Do not lift or move the product by pulling the power cable or any cable.
-
Product failure, an electric shock or re may result from a damaged
cable.
10
Before Using the Product
!
-_-
!
!
!
!
!
Caution
Leaving the screen xed on a stationary image for an extended period of
time may cause afterimage burn-in or defective pixels.
-
If you are not going to use the product for an extended period of time,
activate power-saving mode or a moving-picture screen saver.
Disconnect the power cable from the power socket when not using the
product for an extended period of time (vacation, etc.).
-
Dust accumulation combined with heat can cause a re, electric shock
or electric leakage.
Use the product at the recommended resolution and frequency.
-
Your eyesight may deteriorate.
Do not put DC power adapters together.
-
Otherwise, a re may result.
Remove the plastic bag from the DC power adapter before you use it.
-
Otherwise, a re may result.
Do not leave the DC power adapter near a heat source.
-
Otherwise, a re may result.
Keep the DC power adapter in a location with good ventilation.
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
Do not hold the product upside-down or move it by holding the stand.
-
The product may fall and break or cause a personal injury.
Do not use humidiers or stoves around the product.
-
A re or electric shock may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
-
Eye fatigue will be relieved.
Do not let water enter the DC power adapter or get the adapter wet.
-
An electric shock or re may result.
-
Avoid using the product outdoors where it can be exposed to rain or
snow.
-
Take extra care to ensure the DC power adapter does not get wet when
cleaning the oor with water.
Do not touch the screen when the product has been turned on for an
extended period of time as it will become hot.
11
Before Using the Product
!
Store small accessories out of the reach of children.
Do not place heavy objects on the product.
-
Product failure or personal injury may result.
Do not increase the volume too high when using headphones (earphones).
-
Sound particularly at a higher volume could potentially affect long-term
hearing.
Correct posture to use the product
Use the product in the correct posture as follows:
• Straighten your back.
• Allow a distance of 45 to 50cm between your eye and the
screen, and look slightly downward at the screen. Keep
your eyes directly in front of the screen.
• Adjust the angle so light does not reect on the screen.
• Keep your forearms perpendicular to your upper arms and
level with the back of your hands.
• Keep your elbows at about a right angle.
• Adjust the height of the product so you can keep your
knees bent at 90 degrees or more, your heels attached to
the oor, and your arms lower than your heart.
12
Chapter. 2
Preparation
Unpacking the Smart Station
Removing the Packaging
The appearance of the actual product may differ from the images shown.
1. Open the packaging box. Be careful not to damage the product when you open the
packaging with a sharp instrument.
2. Remove the styrofoam from the product.
3. Check the product and remove the styrofoam and plastic bag.
NOTE
• The appearance of the actual product may differ from the image shown.
• This image is for reference only.
4. Store the box in a dry area so that it can be used when moving the product in the future.
13
Preparation
Checking the Components
Contact the vendor where you purchased the product if any components are missing.
The appearance of the components and items sold separately may differ from the image
shown.
Components
NOTE
Components may vary depending on the country.
Quick setup guide Warranty card
(Not available in some
locations)
Power cable DC power adapter Mobile cable USB 3.0 cable
User manual Cleaning cloth
Items sold separately
NOTE
The following items can be purchased at your nearest retailer.
HDMI-DVI cable LAN cable USB 2.0 cable 30pin USB Connection
Kit (for Galaxy Tab:
USB to 30pin)
Wireless-connection
dongle
(for Series 7 only)
Mobile holder USB Connection Kit
(Micro USB to Normal
USB)
HDMI cable
14
Preparation
Parts
Front Buttons
The color and shape of parts may differ from what is shown. Specications are subject to
change without notice to improve quality.
This is a touch-type button. Tap the button lightly with a nger.
This product contains a power circuit unit causing the stand to generate heat. The heat
does not mean the product is defective.
ICONS DESCRIPTION
Open or close the onscreen display (OSD) menu, or return to
the parent menu.
Open the HUB settings screen.
Conveniently establish a wireless connection Wireless
Connection and change the input source Select Source using
the HUB menu.
NOTE
To hide the HUB window, press the [ ] or [
Turn the power on or off.
The power indicator will be lit when the product is operating
normally.
NOTE
• For details on the power-saving function, refer to “Power-saving
Function” in the product specications.
• To reduce power consumption, it is best to remove the power cable
when not using the product for an extended period of time.
Conrm a menu selection.
If you press the [
displayed, the input source will be changed.
Series 5: HDMI / USB / MHL
Series 7: HDMI / USB / Wireless Connection / MHL
] button when a menu screen is not
] button.
Speaker (for Series 7 only)
NOTE
A message that shows the current input source will appear at the top
left corner of the screen each time you turn on the power or press the
] button to change the input source.
[
Move to the upper or lower menu or adjust the value for an
option on the OSD menu.
Adjust the Brightness, Contrast using the [
the initial screen (that displays no menu screen) is displayed.
] buttons when
15
Preparation
ICONS DESCRIPTION
Move to the left or right menu or adjust the value for an
option on the OSD menu.
Adjust the Volume using the [
screen (that displays no menu screen) is displayed.
] buttons when the initial
Rear View
The color and shape of parts may differ from what is shown. Specications are subject to
change without notice to improve quality.
PORTS ABOUT PORTS
Connect to a source device using an HDMI cable.
Connect to a network using a LAN cable.
Connect to a PC using a USB cable.
NOTE
This port can connect to a PC only.
Connect to a DC power adapter.
16
Preparation
Side
The color and shape of parts may differ from what is shown. Specications are subject to
change without notice to improve quality.
PORTS ABOUT PORTS
PORTS ABOUT PORTS
Connect to a source device using a USB 2.0 cable.
NOTE
High-speed charging is not possible using this port. For high-speed
charging, connect your mobile device to the USB 3.0 [ ] port.
Connect to an audio output device such as headphones.
Connect to a mobile device when you want to use the MHL or
Mobile Control function with the mobile cable.
NOTE
A connection kit is required to connect to some mobile devices.
(Connection kit is sold separately.)
Connect to a source device using a USB 3.0 cable.
NOTE
High-speed charging is possible using the [ ] port only. This port
allows you to charge a mobile device twice as fast compared to when
charging using a standard USB port.
17
Preparation
Adjusting the Product Tilt
The color and shape of parts may differ from what is shown. Specications are subject to
change without notice to improve quality.
21°
90°
87mm
The angle indicates the range the product can be tilted when in use.
The angle indicates the range the product can be tilted when packaged.
• You can adjust the product tilt.
• To avoid damage to the product when adjusting the tilt, push or pull the top area of the
product at the center while holding the top of the stand.
87mm
18
Chapter. 3
Using Smart Station
What is Smart Station?
Smart Station refers to an advanced-concept monitor that offers enhanced usability by
providing useful new functions such as Wireless Connection, USB Hub, and Mobile Control.
The system is optimized especially for notebook PC users.
Wireless Connection
Smart Station provides a clean cable-free working environment through the Wireless
Connection feature.
• Insert a small wireless-connection dongle to your PC. The PC will automatically connect to
your Smart Station monitor without the need of a cable.
• The Smart Station monitor automatically detects and connects to a notebook PC
(where the wireless-connection dongle is inserted) that is within range. The screen will
automatically turn off when the notebook PC is moved out of range.
USB Display / USB Hub
Using older monitors can be inconvenient when using the USB Hub function because you need
to connect a USB cable in addition to a display-output cable (D-sub, DVI, etc.).
The USB Display feature of the Smart Station monitor enables the USB Hub and display output
to function at the same time using a single USB cable.
• The USB Hub provides three USB ports and one mobile port.
• Unlike notebook PCs and older monitors (that have a limited number of ports) being
unable to connect to multiple source devices, the Smart Station monitor allows you to use
multiple source devices at the same time using the HUB feature.
• If a wireless connection is established, you can use the wireless USB Hub function without
the need to connect a USB cable.
19
Using Smart Station
Mobile Control
Connect the Smart Station monitor to your PC and mobile device such as a smartphone.
You can control the mobile device using the keyboard and mouse connected to the PC. This
feature will allow you to use various services such as SNS more conveniently.
• Sharing a keyboard and mouse: You can control both your mobile device and PC using a
single keyboard and mouse.
NOTE
• You can use three monitors by conguring the display settings.
• Wireless Connection is supported on Series 7 only.
• Mobile Control supports only mobile devices that have the USB Host function. Support for this feature
depends on the specications of your mobile device.
• Galaxy S2 is supported. Galaxy S2 from Sprint (available in the US market) is not supported because it
does not have the USB Host function.
• To nd if your mobile device supports USB Host, contact the device manufacturer.
Read the Following before Using the Wireless Connection / USB Hub Functions
1. To use the Wireless Connection / USB Hub functions, connect your PC to the Smart Station
monitor using the wireless-connection dongle or USB cable.
2. The USB Display function enables both the display output and USB Hub to function with a
single USB cable.
3. Using the USB Hub function is not possible if only an HDMI or HDMI-DVI cable is
connected (without a USB cable connected).
4. Playing games usually requires a high resolution and fast response rate. It is recommended
to play games in HDMI mode connecting directly to a graphics card rather than using
Wireless Connection or USB mode. Playing games or videos is not supported while in
Wireless Connection or USB mode on Windows XP or Vista.
5. When the Wireless Connection or USB mode is used for the rst time or the power-saving
mode is deactivated on the PC, it may take a while for the Wireless Connection or USB
mode to be detected.
6. To use the USB Hub function when the Smart Station monitor is in USB mode (where a
USB 3.0 cable is connected to your PC) or in Wireless Connection mode, it is recommended
to connect the USB cable to the black USB 2.0 port on the monitor.
7. If the PC enters power-saving mode while the Smart Station monitor is in Wireless
Connection mode, the Wireless Connection will be disconnected and the USB Hub function
will be disabled.
NOTE
Wireless Connection is supported on Series 7 only.
20
Using Smart Station
Software Installation for Using Smart Station
To use the product, install on your PC the software provided with the product.
When installing the software for the rst time, follow the "Automatic Installation" instructions.
To maximize the performance of the Smart Station monitor, visit www.samsung.com and
upgrade the driver periodically.
NOTE
Wireless Connection Manager is for Series 7 only.
Automatic installation when using a notebook PC
1. After opening the package, connect the Smart Station monitor to your notebook PC using
the USB cable provided in the package.
USB
2. After the connection is established between the Smart Station monitor and PC using the
USB cable, the following software programs required to use the Wireless Connection, USB
Hub, and Mobile Control functions will automatically install.
(Wireless Connection Manager, USB Display Driver, Mobile Control, Ethernet
Driver)
NOTE
The output from the PC will not be displayed on the monitor until installation is complete.
21
Using Smart Station
3. After installation, make the required connections and use the product as instructed below.
-
For Series 5 users
Press the [
Alternatively, press the [
-
For Series 7 users: Disconnect the USB cable. Next, connect the wireless-connection
dongle to a USB port on the PC.
Press the [
Connection. Alternatively, press the [
Connection.
] button on the front of the product to change Select Source to USB.
] button to change the input source to USB.
] button on the front of the product to change Select Source to Wireless
] button to change the input source to Wireless
NOTE
Wireless Connection is supported on Series 7 only.
Automatic installation when using a desktop PC
1. After opening the package, connect the Smart Station monitor to your desktop PC using
the HDMI cable provided in the package.
HDMI OUTHDMI IN
2. Check that the output from the desktop PC is displayed on the monitor.
3. Connect the USB cable provided in the package to a USB port when the HDMI cable is
connected.
HDMI IN
USB
HDMI OUT
22
Using Smart Station
4. After the connection is established between the Smart Station monitor and PC using the
USB cable, the following software programs required to use the Wireless Connection, USB
Hub, and Mobile Control functions will automatically install.
(Wireless Connection Manager, USB Display Driver, Mobile Control, Ethernet
Driver)
5. After installation, make the required connections and use the product as instructed below.
-
For Series 5 users: Disconnect the HDMI cable. Next, connect the monitor to the PC
using only the USB cable.
-
For Series 7 users: Disconnect the HDMI and USB cables. Next, connect the monitor to
the PC using the wireless-connection dongle.
6. Press the [ ] button on the front of the product to move to Select Source. Next, change
the input source.
-
For Series 5 users: USB
-
For Series 7 users: Wireless Connection
NOTE
Wireless Connection is supported on Series 7 only.
* After software installation, adjust the sound output port settings as required.
Control Panel
1
3
Sound
Speakers
CongureSpeakers
2
4
NOTE
• Software installation may be affected by the graphics card, motherboard, or network conditions of the
PC.
• Automatic installation may not be supported depending on your PC system settings. If automatic
installation does not work, run Windows Explorer. Open My Computer – Removable media device drive
and check the software. Finally, double-click the software to proceed with installation. Alternatively,
install using the software program on the provided CD.
23
Using Smart Station
→
→
Reinstall and Update
1. Reinstall
If the provided USB cable is connected again after a software program is removed, the
removed program will be detected and a message will appear asking whether you want to
reinstall the software.
To reinstall, select “Yes” to proceed with installation.
2. Software installation using the provided CD
If automatic installation is not supported or you want to reinstall the software manually,
insert the provided CD into your PC and install.
In this case, install the required software programs one after another.
3. Update
If the provided CD is missing or the latest version driver is needed, download the latest
driver from www.samsung.com.
It is best to update your Smart Station monitor periodically to improve the performance.
Connecting a PC to the Smart Station Monitor (Product)
To use the product, you should connect it to a PC using the wireless-connection dongle or USB
cable.
You can listen to the sound by connecting an audio output device (headphones, etc.) to the
[
] port. (Audio is not supported when an HDMI-DVI cable is used to connect the product to
the PC.)
Series 5: HDMI mode
Series 7: HDMI mode
When the product connects to a PC for the rst time, the optimum resolution (1920 x 1080)
will be selected automatically and the display will be set to extended mode. From the next
time the product connects to the PC, a customized resolution will be applied.
NOTE
• When multiple display output ports on the PC are connected to the product at the same time, each
display signal output depends on the system specications of the PC.
• Wireless Connection is supported on Series 7 only.
USB mode
USB mode
MHL mode
Wireless Connection mode → MHL mode
24
Using Smart Station
Connecting to a PC Using the Wirelessconnection Dongle - for Series 7 Only
Wireless Connection is supported on Series 7 only.
For details on how to connect using a USB cable, refer to "Connecting to a PC Using a
USB Cable" (page 29).
* To connect a PC to the Smart Station wirelessly for Series 7 (C24B750X and C27B750X)
users, refer to the following.
To use the Wireless Connection function, you must connect the wireless-connection dongle
(provided as a component) to a USB port on the PC. The wireless-connection dongle allows
a wireless connection between the product and a PC. The dongle connected to the PC should
point at the product to maximize signal reception.
1. Install the wireless-connection software (automatically by connecting the provided USB
cable) before connecting the dongle (refer to page 21). Using a wireless connection is
possible only when the wireless-connection software (Wireless Connection Manager) is
installed.
2. When automatic installation is complete, disconnect the USB cable. Next, connect the
wireless-connection dongle provided in the package to a USB port on the PC.
3. Press the [ ] button on the front of the product to change Select Source to Wireless
Connection. Alternatively, press the [
Connection.
4. Check if a wireless connection is established.
] button to change the input source to Wireless
NOTE
• If a wireless connection cannot be established, double-click Wireless Connection Manager installed
on the PC to connect to a detected monitor.
• The Smart Station monitor automatically connects to the PC where the wireless-connection dongle is
connected when the PC is moved closer. It automatically disconnects when the PC is moved away.
(To use this function, set Auto Wireless Detection to On in the Hub menu.)
Precautions
del
f15
Up
f14
f13
Down
f12
¿
end
+
f11
?
`
f10
0
Shift
f9
´¨{
P
9
Ñ
f8
-_
O
8
Cmd
L
f7
I
Alt
.:…
7
f6
K
U
;,„
6
win
f5
J
Y
M
Ctrl
f4
5
H
T
N
f3
4
G
R
f2
B
3
F
f1
E
V
2
D
W
esc
1
C
S
Q
X
ººª
A
Z
Cmd
Alt
Bloq/uppercase
win
Shift
Ctrl
NOTE
• Wireless communication can be affected by the surrounding environmental conditions. Do not place any
object or obstruction between the product and PC. Objects/obstructions can affect the sensitivity of the
signal transmission/reception.
• The wireless-connection dongle on the PC must point at the product. Ensure the product and PC are at
the same level.
• If the product and PC are not placed at the same level as shown in the image, the table can be an
obstacle and degrade wireless performance even though the dongle on the PC is pointing at the product.
• The sensitivity of the signal reception/transmission can affect the performance of video or game
playback (choppy or slowed-down video).
• To maximize the signal transmission/reception, insert the wireless-connection dongle into the nearest
USB port (on the PC) to the product.
• Wireless communication performance is optimal within a range of 1.5m from the product.
• Ensure the product and PC are placed at the same level (on the same table, etc.). Otherwise, the
sensitivity of the signal transmission/reception can be degraded.
• Using the product on a steel table can degrade performance.
• Do not place any object that can obstruct the signal transmission in front of the product. Such objects
may decrease signal reception.
• The product cannot connect to multiple PCs wirelessly at the same time.
25
Using Smart Station
Using Wireless Connection (Wireless Connection
Manager)
Wireless Connection Manager is for Series 7 only.
The Wireless Connection Manager program allows you to connect your PC to the Smart
Station monitor wirelessly.
To use a Wireless Connection, you must install the Wireless Connection Manager program.
Have the program install automatically by connecting the provided USB cable during the initial
setup (refer to page 21).
You can use the USB Hub feature as well as display the PC screen over a wireless connection
without the need of a cable.
1. Connect your PC to the product using the USB cable provided in the package. Wireless
Connection Manager will automatically install.
2. After the program is installed, remove the USB cable. Next, connect the provided wireless-
connection dongle to a USB port on the PC.
3. Press the [ ] icon at the far right side of the taskbar to install Wireless Connection
Manager.
4. Run Wireless Connection Manager. A list of monitors you can connect to will appear.
Double-click or right-click the desired monitor. Next, select Connect.
You can set the desired monitor as the primary monitor Set as default.
Double-click or right-click the desired monitor. Next, select Set as default.
You can change the name of a monitor.
Double-click or right-click the desired monitor. Next, select Rename.
Auto Wireless Detection
If Auto Wireless Detection mode is enabled, the product will automatically connect or
disconnect from the notebook PC when the notebook PC is moved closer or further away.
Make your wireless connection experience even more convenient through Auto Wireless
Detection.
1. Run Wireless Connection Manager.
2. Right-click on the monitor you want to connect to. Next, select Set as default.
3. Press the [ ] button on the product. Next, set Auto Wireless Detection to On.
26
Using Smart Station
Using the Wireless-connection Dongle as a Hub
Wireless Connection is supported on Series 7 only.
For details on how to use a USB cable as a hub, refer to "Using the Product as a USB
Hub" (page 30).
Connect various source devices (peripherals, etc.) to the product using it as a hub.
• A PC cannot connect to multiple source devices at the same time because there are
a limited number of input/output ports available. The HUB feature of the product will
improve your work efciency by allowing you to connect source devices (peripherals, etc.)
to the USB ports on the product without the need to connect them to a PC.
• Connecting source devices to the product will make your work area tidy and improve the
portability of your notebook PC compared to when connecting them to the notebook PC.
-
The product has one mobile port and three USB ports (including one Ethernet port).
Refer to page 16~17 for further details on the ports.
• Connect a mobile device such as an MP3 player or smartphone to the product when
connected to a PC. This allows you to control the device from the PC or charge the device
battery.
NOTE
• To detect and start a source device faster, connect the device to the blue USB 3.0 port on the product.
• An external mass-storage HDD requires an external power supply. Be sure to connect it to a power
source.
• High-speed charging is possible using the [ ] port only. This port allows you to charge a mobile
device twice as fast compared to when charging using a standard USB port.
• Battery charging is possible in power-saving mode. However, it is not possible when the product is
powered off.
• Note that the battery will not be charged if the power cable is disconnected from the power socket.
• Mobile devices should be purchased separately.
27
Using Smart Station
LAN Connection - Wireless
Wireless Connection is supported on Series 7 only.
For details on how to establish a LAN connection using a USB cable, refer to “LAN
Connection - Wired(page 31)”.
The Smart Station function allows you to access the Internet from your PC by connecting the
LAN cable to the product (when connected to a PC). There is no need to directly connect the
LAN cable to the PC.
LAN
LAN disconnection
You can remove the LAN cable using a at-head screwdriver or ruler.
28
Using Smart Station
Connecting to a PC Using a USB Cable
For details on how to establish a wireless connection using the wireless-connection dongle,
refer to "Connecting to a PC Using the Wireless-connection Dongle" (page 25).
USB
1. Connect the USB cable to the [ ] port on the back of the product and a USB
port on the PC.
2. Press the [ ] button on the front of the product to change Select Source to USB.
Alternatively, press the [
NOTE
• The product is compatible with a USB 2.0 cable. However, it is best to use a USB 3.0 cable to ensure full
functionality of the product.
• The product screen may appear blank when some notebook PCs are connected using the USB 3.0 cable.
If the screen is blank, connect your notebook PC using a USB 2.0 cable.
] button to change the input source to USB.
To connect to a PC using a USB cable
1. Connect the USB cable to the product and PC.
2. Press the [ ] button until the input source of the product changes to USB. Alternatively,
press the [
3. The product will display the PC screen when the connection is established.
] button and click Select Source - USB.
Automatic/Manual USB Cable Connection
The input source may automatically change to USB if a connection is established between the
product and PC via the USB cable. If the input source does not change to USB automatically,
press the [
button and click Select Source - USB.
NOTE
• If a USB cable and the wireless-connection dongle are connected at the same time, the highest priority
is given to the Wireless Connection. The product cannot connect to multiple PCs wirelessly at the same
time.
• Wireless Connection is supported on Series 7 only.
] button until the input source changes to USB. Alternatively, press the [ ]
29
Using Smart Station
Using the Product as a USB Hub
For details on how to use the wireless-connection dongle as a hub, refer to "Using the
Wireless-connection Dongle as a Hub" (page 27).
Using the product as a hub, connect and use various source devices with the product at the
same time.
• A PC cannot connect to multiple source devices at the same time because there are
a limited number of input/output ports available. The HUB feature of the product will
improve your work efciency by allowing you to connect source devices (peripherals, etc.)
to the USB ports on the product without the need to connect them to a PC.
• If source devices are connected to the PC, the numerous cables around the PC can get
tangled and look messy. Connecting them directly to the product will resolve this.
• Connect a mobile device such as an MP3 player or smartphone to the product when
connected to a PC. This allows you to control the device from the PC or charge the device
battery.
NOTE
• To detect and start a source device faster, connect the device to the blue USB 3.0 port on the product.
• An external mass-storage HDD requires an external power supply. Be sure to connect it to a power
source.
• High-speed charging is possible using the [ ] port only. This port allows you to charge a mobile
device twice as fast compared to when charging using a standard USB port.
• Battery charging is possible in power-saving mode. However, it is not possible when the product is
powered off.
• Battery charging is not possible if the power cable is disconnected from the power socket.
• Mobile devices should be purchased separately.
USB
30
Using Smart Station
LAN Connection - Wired
The Smart Station function allows you to access the Internet from your PC by connecting the
LAN cable to the product (when connected to a PC). There is no need to directly connect the
LAN cable to the PC.
USB
LAN
NOTE
You can remove the LAN cable using a at-head screwdriver or ruler.
Refer to the "LAN disconnection(page 28)" section for further details.
Monitor IP Setup
1. Install the integrated software for the Smart Station monitor.
2. Go to Control Panel
Change adapter settings.
3. You can see that the following two devices are displayed.
a. The user PC’s network device
b. The Smart Station monitor’s network device (USB to Ethernet adapter)
The two devices above refer to your PC’s LAN network device and your Smart Station
monitor’s network device.
NOTE
To access the Internet using the LAN network of the Smart Station monitor, you must congure the network
as follows according to the type of IP you will be using.
Dynamic IP
Dynamic IP address mode automatically congures the network settings on the PC using data
sent by a server that allocates an IP address. This is possible as a result of the “Dynamic Host
Conguration Protocol (DHCP)” service. The service consists of three steps: an IP address
allocation request is sent to the DHCP server when the PC boots up, the DHCP server that
receives the request transmits network information such as the IP address to the PC, and
the transmitted network information is automatically congured for the network settings on
the PC. The DHCP service is convenient and useful especially in an environment where many
PCs are used. Generally, the IP address should change each time the PC boots up (or an IP
allocation is requested). In most cases, however, the existing IP address is re-allocated. An
Internet router performs two roles at the same time. It creates a private internal IP address
(NAT service) and automatically allocates the IP address to each PC (DHCP service).
Network and Internet
Network and Sharing Center
31
Using Smart Station
NOTE
When using the LAN network of the Smart Station monitor or PC, ensure you connect the LAN cable to only
one of the two networks. If you connect the LAN cable to both networks, a system crash may occur.
1. Connect the LAN cable to the Smart Station monitor.
2. Set the network device of the Smart Station monitor to Enable using the Network
Settings menu.
NOTE
To enable the network device of the Smart Station monitor, go to Control Panel
Internet
Station monitor network device (displayed as LAN9512/LAN9514 USB 2.0 to Ethernet 10/100
Adapter).
Network and Sharing Center
Right-click on your mouse.
Change adapter settings.
Select Enable.
Network and
Select the Smart
Static IP
To congure the IP address (private or ofcial) on your PC, someone (usually a server) must
allocate an IP address to the PC. An external IP address is allocated to you by your Internet
service provider. An internal IP address is allocated to you by your Internet router. You can
select whether to congure the IP address on the PC automatically or manually. The static IP
address mode is used to manually enter an IP address. The static IP address mode is suitable
if the IP address for the PC should not be changed (such as for a le sharing server) and
generally is not used, except under such special circumstances.
3. Check that Obtain an IP address automatically is selected for the network device of
the Smart Station monitor in the network properties.
NOTE
To check that the network device of the Smart Station monitor is set to obtain an IP address
automatically, go to Control Panel
Change adapter settings.
LAN9512/LAN9514 USB 2.0 to Ethernet 10/100 Adapter).
Select Properties.
Select Internet Protocol Version 4(TCP/IPv4).
Network and Internet
Select the Smart Station monitor network device (displayed as
Network and Sharing Center
Right-click on your mouse.
Select Properties.
NOTE
When using the LAN network of the Smart Station monitor or PC, ensure you connect the LAN cable to only
one of the two networks. If you connect the LAN cable to both networks, a system crash may occur.
1. Set the LAN network on your PC to Disable using the Network Settings menu.
NOTE
To disable the LAN network on your PC, go to Control Panel
Network and Sharing Center
notebook PC.
Right-click on your mouse.
Change adapter settings.
Select Disable.
Network and Internet
Select the network device of your
32
Using Smart Station
4. After setting the IP, click OK. When the following message appears, click No.
2. Right click on the network device of the Smart Station monitor (displayed as LAN9512/
LAN9514 USB 2.0 to Ethernet 10/100 Adapter), and select Enable.
NOTE
This process must be done before IP conguration.
3. Enter the static IP address assigned to the network device of the Smart Station monitor.
NOTE
To enter the static IP address, go to Control Panel
Sharing Center
monitor (displayed as LAN9512/LAN9514 USB 2.0 to Ethernet 10/100 Adapter).
on your mouse.
Select Properties.
Change adapter settings.
Select Properties.
Congure the static IP and DNS settings.
Select Internet Protocol Version 4 (TCP/IPv4).
Network and Internet
Select the network device of the Smart Station
Network and
Right-click
NOTE
• A static IP address is assigned to a single network device. The above message appears when the
same static IP address is assigned to both the LAN network device on your PC (disabled) and the
network device of the Smart Station monitor. Ensure the network device you are not using is set to
Disable.
• To use the LAN network on your PC, change the settings accordingly:
Set the network device of the Smart Station monitor to Disable.
the PC.
Congure the IP.
5. Click the Close button.
Enable the network device on
33
Using Smart Station
What is Mobile Control?
The Mobile Control program allows you to control a device (smartphone, tablet, notebook
PC, etc.) connected to the Smart Station monitor using a keyboard and mouse connected to
the Smart Station monitor or PC. If a notication is received on your smartphone while you
are on your PC, you can conveniently move your keyboard and mouse pointer focus to the
smartphone. You can also use a tablet as a secondary display. The Mobile Control provides
you with enhanced usability by allowing you to control two devices using a single keyboard
and mouse and connect different kinds of devices.
* To use the Mobile Control, you must connect a mobile device that has the host function
to the Smart Station monitor.
Using the Mobile Control function is not possible when a mobile device that does not
have the host function is connected.
Using Mobile Control (Sharing Your Keyboard/Mouse)
Connect your PC to the Smart Station monitor using the USB cable provided in the package.
The Mobile Control and Wireless Connection Manager software will automatically install.
NOTE
• Check the instructions according to the type and operating system of your mobile device.
• The software may not install automatically due to an anti-virus program on the PC. If this is the case,
install Mobile Control by running the program install le on the provided manual CD.
• Wireless Connection Manager is for Series 7 only.
About Mobile Control Mode
• [ ] Charging/Control Mode
The battery of the connected device can be charged.
The mouse movement will slow down slightly the moment the mouse pointer focus is
moved to the connected device.
The battery will not charge if the keyboard and mouse pointer focus is on the mobile
device.
• [ ] Fast Control Mode
The connected device cannot be charged.
The keyboard and mouse pointer focus can be quickly moved to the connected device.
NOTE
• Mobile Control supports only mobile devices that have the USB Host function. Support for this
feature depends on the specications of your mobile device.
• Galaxy S2 is supported. Galaxy S2 from Sprint (available in the US market) is not supported
because it does not have the USB Host function.
34
Using Smart Station
Using the Mobile Control
1 2
Connect your PC to the product using the wireless-connection
dongle or a USB cable.
NOTE
• Connect your PC to the product using the wireless-connection
dongle or a USB cable.
• For further details on how to connect, refer to "Software
Installation for Using Smart Station" (page 21).
Connect the mobile device to the product using the mobile
cable.
NOTE
• A connection kit is required to connect to some mobile devices.
• For further details on how to connect, refer to "Connecting and
Using Devices by Type" (page 36).
If the PC is connected to the product, Mobile Control and
Wireless Connection Manager will automatically install.
NOTE
• If installation does not start automatically, install the Mobile
Control program using the install le found on the user manual CD
provided.
• Wireless Connection Manager is for Series 7 only.
To move the mouse and keyboard pointer focus to the mobile
device, press the mouse wheel or the shortcut keys (Alt + S)
on the keyboard.
NOTE
The shortcut keys can be customized in the custom settings window.
Refer to "Changing the Settings" (page 40).
After the software is installed, the Mobile Control icon will
appear on the far right side of the taskbar.
NOTE
Charging/Control Mode will be set as default. You can then charge
the connected device.
To move the mouse input and keyboard focus to a mobile
device more quickly, double click the Mobile Control icon on
the right to activate Fast Control Mode.
NOTE
In this mode, movement of the mouse input and keyboard focus is
faster but battery charging is not possible.
35
Using Smart Station
Connecting and Using Devices by Type
Check the proper instructions for the device you will be using.
Mobile devices should be purchased separately.
Android smartphones
* When your mobile device has a Micro USB port
Wired connection Wireless connection (for Series 7 only)
MOBILE
USB
MOBILE
NOTE
Before connecting to your mobile device, check that the Mobile Control icon is found on the far right side
of the taskbar.
1. Connect your Android smartphone to the Smart Station monitor using the mobile cable.
2. After the connection is established, Charging/Control Mode will be set as default. You
can then charge your smartphone. In this mode, it may take a while to shift the keyboard
and mouse pointer focus to the smartphone.
3. To move the keyboard and mouse pointer focus to the smartphone, press the mouse
wheel or the shortcut keys (Alt + S) on the keyboard. The mouse cursor will move to the
smartphone. You can now use the keyboard and mouse on your smartphone.
NOTE
• If the keyboard or mouse input focus is on the mobile device, the PC cannot be controlled using the
same input device (keyboard or mouse).
• To move the keyboard and mouse input focus back to the PC, press the center button on the mouse
or press the shortcut keys (Alt+S) on the keyboard.
4. To move the keyboard and mouse pointer focus to the smartphone more quickly, double-
click the Mobile Control icon on the far right side of the taskbar and activate Fast Control
Mode. In this mode, shifting the keyboard and mouse pointer focus is faster and the
battery charging function is not available.
NOTE
The shortcut keys can be customized.
For details on changing the shortcut keys, refer to "Changing the Settings"(page 40).
36
Using Smart Station
Android tablet
* When your mobile device has a normal USB port
Mobile devices should be purchased separately.
Wired connection Wireless connection (for Series 7 only)
MOBILE
USB
USB Connection Kit (Micro USB to Normal USB)
MOBILE
NOTE
• If your tablet has a Micro USB port, you can use the same connection method as the Android
smartphone. Refer to “Android smartphones”(page 36).
• Charging/Control Mode is not supported and battery charging is not possible.
• Before connecting to your mobile device, check that the Mobile Control icon is found on the far right
side of the taskbar.
1. Connect the mobile cable to the USB Connection Kit. Next, connect the tablet to the Smart
Station monitor using the connected mobile cable and USB Connection Kit.
2. After the connection is established, Fast Control Mode will be set as default. The
charging function will not be available.
* When the USB Connection Kit (Micro USB to Normal USB) is connected, Fast Control
Mode is the default mode. Charging/Control Mode will not be available.
* To charge your tablet, connect the tablet to a USB port on the Smart Station monitor
using the USB cable provided with the tablet.
NOTE
High-speed charging is possible using the [ ] port only. This port allows you to charge a mobile
device twice as fast compared to when charging using a standard USB port.
3. To move the keyboard and mouse pointer focus to the tablet, press the mouse wheel or
the shortcut keys (Alt + S) on the keyboard. The mouse cursor will move to the tablet. You
can now use the keyboard and mouse on your tablet.
NOTE
• If the keyboard or mouse input focus is on the mobile device, the PC cannot be controlled using the
same input device (keyboard or mouse).
• To move the keyboard and mouse input focus back to the PC, press the center button on the mouse
or press the shortcut keys (Alt+S) on the keyboard.
NOTE
The shortcut keys can be customized.
For details on changing the shortcut keys, refer to "Changing the Settings"(page 40).
37
Using Smart Station
Galaxy Tab 10.1
* When your mobile device has a Samsung 30-pin port
Mobile devices should be purchased separately.
The 7-inch Galaxy Tab is not supported because it does not have the host function.
You need a 30pin USB Connection Kit (for Galaxy Tab: USB to 30pin) that is sold separately.
Wired connection Wireless connection (for Series 7 only)
MOBILE
MOBILE
NOTE
• Charging/Control Mode is not supported and battery charging is not possible.
• Before connecting to your mobile device, check that the Mobile Control icon is found on the far right
side of the taskbar.
1. Connect the USB Connection Kit (Micro USB to Normal USB) to the mobile cable and 30pin
USB Connection Kit (for Galaxy Tab: USB to 30pin). Next, connect the Galaxy Tab to the
Smart Station monitor using the connected mobile cable, USB Connection Kit and 30-pin
USB connection kit.
2. To move the keyboard and mouse pointer focus to the Galaxy Tab, press the mouse wheel
or the shortcut keys (Alt + S) on the keyboard. The mouse cursor will move to the Galaxy
Tab. You can now use the keyboard and mouse on your Galaxy Tab.
NOTE
• If the keyboard or mouse input focus is on the mobile device, the PC cannot be controlled using the
same input device (keyboard or mouse).
• To move the keyboard and mouse input focus back to the PC, press the center button on the mouse
or press the shortcut keys (Alt+S) on the keyboard.
NOTE
• The shortcut keys can be customized. For details on changing the shortcut keys, refer to "Changing
the Settings"(page 40).
• To charge the Galaxy Tab, connect it to the high-speed charging port [ ].
USB
USB Connection Kit (Micro USB to Normal USB)
30pin USB Connection Kit (for Galaxy Tab: USB to 30pin) - sold separately
38
Using Smart Station
Connecting to two PCs
Wired connection Wireless connection (for Series 7 only)
MOBILE
USB
MOBILE
NOTE
• Charging/Control Mode is not supported and battery charging is not possible.
• Before connecting to your mobile device, check that the Mobile Control icon is found on the far right
side of the taskbar.
1. Connect the scanning PC to the Smart Station monitor using the provided USB cable or
wireless-connection dongle.
2. Connect the secondary PC to the Smart Station monitor using the mobile cable and USB
Connection Kit (Micro USB to Normal USB).
* A desktop PC cannot be used as a secondary PC.
3. After the connection is established, Fast Control Mode will be set as default.
* When the USB Connection Kit (Micro USB to Normal USB) is connected, Fast Control
Mode is the default mode. Charging/Control Mode will not be available.
4. To move the keyboard and mouse pointer focus from the scanning PC to the secondary PC,
move your mouse cursor on the screen of the scanning PC to the screen of the secondary
PC. The keyboard and mouse pointer focus will move in the same manner as when using
dual displays.
(Alternatively, press the mouse wheel or the shortcut keys (Alt + S) on the keyboard.)
NOTE
The shortcut keys can be customized.
For details on changing the shortcut keys, refer to "Changing the Settings"(page 40).
USB Connection Kit (Micro USB to Normal USB)
39
Using Smart Station
Changing the Settings
1. Right-click on the Mobile Control icon on the far right side of the taskbar.
The following context menu items will appear.
2. Select Options from the context menu items.
You can change the settings as required. You can also customize the shortcut keys.
Changing the position of a PC (Mobile Control)
When connected to two PCs
1. Connect the scanning PC to the Smart Station monitor using the provided USB cable or
wireless-connection dongle.
2. Connect the secondary PC to the Smart Station monitor using the mobile cable and USB
Connection Kit (Micro USB to Normal USB).
NOTE
For details on how to connect to two PCs, refer to the section "Connecting to two PCs" (page 39).
3. After the connection is established, [ ] Fast Control Mode will be set as default.
4. If two PCs are connected to the product, the option Position of Other PC will be enabled
and the position of the secondary PC can be changed.
NOTE
• If two PCs are connected to the product, only the primary PC can be used to change the position of
the secondary PC.
• If two PCs are connected to the product, the secondary PC cannot connect to a source device
through a USB cable or wireless connection.
40
Using Smart Station
ToTransferlesbetweentwoPCs(Desktop-NotePC)
Transfer les between two PCs, such as a desktop PC and a notebook PC, conveniently by
dragging and dropping the les.
Using the Mobile-device Holder
You can use the mobile-device holder provided in the package when connecting a mobile
device to the product.
41
Chapter. 4
Using MHL
MHL(MobileHigh-DenitionLink)
Connect a mobile device that supports MHL to the product and view videos and photos (saved
on the device) using the product screen.
MHL
• Since the display size of the product is larger than those of mobile devices, the picture quality may
degrade.
• This product is ofcially MHL-certied. In the event of a problem with a mobile device connection,
contact the mobile device manufacturer.
• The picture quality may degrade when content (imported from the mobile device) with a low resolution
is displayed on the product.
NOTE
• To use the MHL function, you need an MHL-certied mobile device. You can check if your mobile device
is MHL certied on the website of the device manufacturer. To nd a list of MHL-certied devices, visit
the ofcial MHL website (http://www.mhlconsortium.org).
• To use the MHL function, the latest version of software must be installed on the mobile device.
• On some mobile devices, the MHL function may not be available depending on the device performance
or functionality.
42
Using M H L
Using MHL
MOBILE
1. Connect the Micro USB port on the mobile device to the MOBILE port on the product using
the mobile cable.
2. Connect the DC power adapter to the product and a power socket.
3. After the power is connected, the product will automatically detect and change the input
source.
• Press the [ ] button and set Select Source to MHL.
• If the input source is not set to MHL, press the [ ] button to change the input
source.
4. If the following message appears, MHL mode is activated. After about 3 seconds, the MHL
screen will be displayed.
HDMI / USB / Wireless Connection MHL
[MHL]
MHL
MHL activated.
3 sec later
• Wireless Connection is displayed on Series 7 only.
NOTE
The indicated time "after 3 seconds" may vary depending on the mobile device.
When the mobile device is in power-saving mode
NOTE
When the mobile device is in power-saving mode, the following message will appear in place of the MHL
screen. To display the MHL screen, deactivate power-saving mode.
MHL device is in sleep mode.
NOTE
Mobile devices should be purchased separately.
43
Using M H L
When the mobile device is not connected or does not
support MHL
NOTE
• Mobile Control and MHL are not supported at the same time.
• If the mobile device is not connected or the connected mobile device does not support the MHL function,
the following screen will appear.
• If MHL mode does not activate, check the connection of the mobile device. If MHL mode does not
activate, check if the mobile device supports MHL.
• If MHL mode does not activate even though the mobile device supports MHL, update the rmware on
the device to the latest version.
MHLMHL
MHL device is not connected or
the device doesn't support MHL.
NOTE
The indicated time "after 3 seconds" may vary depending on the mobile device.
3 sec later
Check Signal Cable
MHL
Disabling MHL
When the cable is disconnected or the mobile device is
powered off
If the mobile cable is disconnected or the mobile device is powered off when MHL is active,
the MHL function will be disabled.
MHL
NOTE
• If the mobile cable is disconnected, the product will display the message Check Signal Cable and remain
in MHL mode.
• The indicated time "after 3 seconds" may vary depending on the mobile device.
Disconnect device
or
Power off
MHL device disconnected.
3 sec later
Check Signal Cable
MHL
44
Chapter. 5
Connecting and Using a Source Device
Checklist before Connecting to Source Devices
Check the following before you connect this product with other devices.
You can connect a camcorder, audio player or DVD player to the product.
(Note that the optimal performance can be achieved when the resolution of the source device
is Full HD 1080p.)
Pre-connection Checkpoints
-
Check the available ports on the back of the source device.
-
Refer to the user manual for the source device when connecting it to the product.
The number and locations of ports can vary depending on the source device.
-
Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
Connecting the Power
DC 14V
1. Connect the power cable to the DC power adapter. Next, connect the adapter to the
product.
45
Connecting and Using a Source Device
Connecting and Using a PC
Connecting to a PC
Select a connection method suitable for your PC.
Connecting parts may differ in different products.
Connection Using an HDMI-DVI Cable
HDMI IN
1. Connect the HDMI port on the back of the product to the DVI port on the PC using the
HDMI-DVI cable.
2. Connect the DC power adapter to the product and a power socket. Next, turn on the
power switch on the PC.
3. Press the [ ] button on the product to change the input source to HDMI.
DVI OUT
Connection Using an HDMI Cable (Digital Type)
HDMI OUTHDMI IN
1. Connect the HDMI port on the back of the product to the HDMI port on the PC using an
HDMI cable.
2. Connect the DC power adapter to the product and a power socket. Next, turn on the
power switch on the PC.
3. Press the [ ] button on the product to change the input source to HDMI.
NOTE
• Open the SETUP&RESET menu. Next, set PC/AV Mode to PC.
• Only Series 7 has an internal speaker.
• You can listen to the sound by connecting an audio output device (headphones, etc.) to the [ ] port on
the product.
• To use the USB Hub and Mobile Control functions, you must make a connection as follows.
-
Series 5 users: Connect using only a USB cable.
-
Series 7 users: Connect using a USB cable. Alternatively, connect wirelessly using the wireless-
connection dongle.
NOTE
• Open the SETUP&RESET menu. Next, set PC/AV Mode to PC.
• Audio is not available if the PC and product are connected via the HDMI-DVI port.
• To use the USB Hub and Mobile Control functions, you must make a connection as follows.
-
Series 5 users: Connect using only a USB cable.
-
Series 7 users: Connect using a USB cable. Alternatively, connect wirelessly using the wireless-
connection dongle.
46
Connecting and Using a Source Device
Driver Installation
NOTE
• You can set the optimum resolution and frequency for this product by installing the corresponding
drivers.
• An installation driver is contained on the CD supplied with the product.
• If the provided le is faulty, visit the Samsung Electronics homepage (http://www.samsung.com) and
download the le.
1. Insert the user manual CD provided with the product into the CD-ROM drive.
2. Click "Windows Driver."
3. Follow the instructions given on the screen to proceed with installation.
4. Select your product model from the list of models.
PC System Requirements for Using the Product
The Mobile Control product is designed mainly for notebook PC users. It is recommended
to use a PC that satises the following system requirements.
ITEMS SPECIFICATIONS
CPU Core Core2Duo
CPU Speed 2.2 GHZ
OS XP, WIN7
Graphics driver Intel, AMD, NVIDIA.
32 bit or 64 bit Both
RAM 2GB
NOTE
• The operating system on your PC can affect the PC's performance for video or game playback.
• It is recommended to use Windows 7 with the Mobile Control product.
5. Go to Display Properties and check that the resolution and refresh rate are appropriate.
Refer to your Windows OS manual for further details.
47
Connecting and Using a Source Device
Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the
product for the rst time after purchase.
Select a language on the product and change the resolution on your PC to the optimum
setting.
The optimal resolution for this monitor is as follows:
1920 x 1080 60Hz
Use the above settings to set the resolution on your PC.
English
Exit EnterAdjust
1. Press [ ] to move to the language you want and press [ ].
2. To hide the information message, press [
].
NOTE
• If the optimal resolution is not selected, the message will appear up to three times for a specied
time even after the product is turned off and on again.
• The resolution can also be changed to the optimal setting (1920 x 1080) using Control Panel on your
PC.
Changing the Resolution Using a PC
NOTE
• Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality.
• The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Changing the Resolution on Windows XP
Go to Control Panel
Display → Settings and change the resolution.
48
Connecting and Using a Source Device
Changing the Resolution on Windows Vista
Go to Control Panel → Personalization → Display Settings and change the resolution.
Changing the Resolution on Windows 7
Go to Control Panel → Display → Screen Resolution and change the resolution.
49
Connecting and Using a Source Device
Connecting to a Video Device
The product can be connected to a video device.
Connecting parts may differ in different products.
Connection Using an HDMI Cable
HDMI IN
1. Connect an HDMI cable to the HDMI ports on the product and video device.
2. Press the [ ] button on the product to change the input source to HDMI.
NOTE
• Open the SETUP&RESET menu. Next, set PC/AV Mode to AV.
• Only Series 7 has an internal speaker.
• You can listen to the sound by connecting an audio output device (headphones, etc.) to the [ ] port on
the product.
HDMI OUT
Connecting to an Audio Output Device
• Connect an audio output device (headphones, etc.) to the [ ] port on the product.
50
SAMSUNG
MA
GI C
SAMSUNG
MA
GI C
SAMSUNG
MA
GI C
SAMSUNG
MA
GI C
Chapter. 6
Screen Setup
Config u r e t h e screen set t i n g s s u ch as brigh t n e s s a n d color tone .
MAGIC
You can customize the screen brightness and tint to suit your preferences.
SAMSUNG MAGIC Bright
This menu provides an optimum picture quality suitable for the environment where the
product will be used.
NOTE
The available menu options for
Conguring
1. Press [
Bright
] on the product.
2. Move to PICTURE using the [ ] buttons. Next, press the [ ] button.
3. Move to MAGIC using the [ ] buttons. Next, press the [ ] button.
4. Move to
Bright using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
Bright vary depending on the PC/AV Mode setting of SETUP&RESET.
MAGIC
SAMSUNG
Brig nt
MAGIC
SAMSUNG
Colo r
MAGIC
Return EnterAdjust
• Custom: Customize the contrast and brightness as desired.
• Standard: Obtain a picture quality suitable for editing documents and using Internet.
• Game: Obtain a picture quality suitable for playing games that involve many graphic effects and dynamic
movements.
• Cinema: Obtain the brightness and sharpness of TVs suitable for viewing video and DVD content.
• Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.
:
Custom
Standard
:
Game
Cinema
Dynamic Contrast
NOTE
In PC mode
If you change the Brightness or Contrast setting when
current mode will automatically change to Custom mode.
Bright is set to Standard or Game mode, the
51
Screen Setup
SAMSUNG
MA
GI C
SAMSUNG
MA
GI C
SAMSUNG
MA
GI C
SAMSUNG
MA
GI C
SAMSUNG
MA
GI C
SAMSUNG
MA
GI C
SAMSUNG
MA
GI C
MAGIC
SAMSUNG
Brig nt
MAGIC
SAMSUNG
Colo r
MAGIC
Return EnterAdjust
:
Dynamic
Standard
:
Movie
Custom
• Dynamic: This mode is suitable when the ambient light is bright.
• Standard: This mode is generally suitable for any environment.
• Movie: This mode reduces eye fatigue.
• Custom: Customize the Contrast and Brightness settings.
NOTE
If you change the Brightness, Contrast or Sharpness setting when
or Movie, the current mode will automatically change to Custom mode.
5. Press [ ] to move to the option you want and press [ ].
6. The selected option will be applied.
In AV mode
Bright is set to Dynamic, Standard
SAMSUNG MAGIC Color
Color is a new picture-quality improvement technology developed independently by
Samsung Electronics. It delivers vivid natural colors without picture quality degradation.
NOTE
Not available if
Conguring
1. Press [
2. Move to PICTURE using the [ ] buttons. Next, press the [ ] button.
3. Move to MAGIC using the [ ] buttons. Next, press the [ ] button.
4. Move to
The following screen will appear.
Bright is in Cinema or Dynamic Contrast mode.
Color
] on the product.
Color using the [ ] buttons. Next, press the [ ] button.
MAGIC
SAMSUNG
MAGIC
SAMSUNG
MAGIC
Return EnterAdjust
Colo r
:
CustomBrig nt
:
Off
Demo
Full
Intelligent
• Off: Disable the
• Demo: Compare normal screen mode with
Color function.
Color mode.
• Full: Obtain a vivid picture quality for all areas including skin tones in the picture.
• Intelligent: Improve the chroma for all areas except skin tones in the picture.
5. Press [ ] to move to the option you want and press [ ].
6. The selected option will be applied.
52
Screen Setup
SAMSUNG
MA
GI C
Return EnterAdjust
▶
:
:
:
:
:
PICTURE
MAGIC
Brightness
Contrast
Sharpness
Response Time
HDMI Black Level
50
60
75
Faster
Normal
SAMSUNG
MA
GI C
SAMSUNG
MA
GI C
Return EnterAdjust
PICTURE
MAGIC
Brightness
Contrast
Sharpness
Response Time
HDMI Black Level
▶
:
:
:
:
:
50
60
75
Faster
Normal
Brightness
You can adjust the general brightness of the picture. (Range: 0~100)
A higher value will make the picture appear brighter.
NOTE
Not available if
ConguringBrightness
1. Press [
2. Move to PICTURE using the [ ] buttons. Next, press the [ ] button.
3. Move to Brightness using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
Bright is in Dynamic Contrast mode.
] on the product.
Contrast
Adjust the contrast between the objects and background. (Range: 0~100)
A higher value will increase the contrast to make the object appear clearer.
NOTE
• Not available if
• Not available if
ConguringContrast
1. Press [
2. Move to PICTURE using the [ ] buttons. Next, press the [ ] button.
3. Move to Contrast using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
] on the product.
Bright is in Cinema or Dynamic Contrast mode.
Color is in Full or Intelligent mode.
4. Adjust the Brightness setting using the [ ] buttons.
4. Adjust the Contrast setting using the [ ] buttons.
53
Screen Setup
SAMSUNG
MA
GI C
SAMSUNG
MA
GI C
Return EnterAdjust
PICTURE
MAGIC
Brightness
Contrast
Sharpness
Response Time
HDMI Black Level
▶
:
:
:
:
:
50
60
75
Faster
Normal
Return EnterAdjust
PICTURE
MAGIC
Brightness
Contrast
Sharpness
Response Time
HDMI Black Level
▶
:
:
:
:
:
50
60
75
Normal
Faster
Fastest
Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.
NOTE
• Not available if
• Not available if
ConguringSharpness
1. Press [
2. Move to PICTURE using the [ ] buttons. Next, press the [ ] button.
3. Move to Sharpness using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
4. Adjust the Sharpness setting using the [ ] buttons.
Bright is in Cinema or Dynamic Contrast mode.
Color is in Full or Intelligent mode.
] on the product.
Response Time
Accelerate the panel response rate to make video appear more vivid and natural.
NOTE
• It is recommended to set the response rate to Normal or Faster when you are not viewing a video.
• The functions available may vary depending on the product model. Refer to the actual product.
ConguringResponse Time
1. Press [
2. Move to PICTURE using the [ ] buttons. Next, press the [ ] button.
3. Move to Response Time using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
• Normal - Faster - Fastest
4. Move to the desired option using the [ ] buttons. Next, press the [ ] button.
5. The selected option will be applied.
] on the product.
54
Screen Setup
Return EnterAdjust
PICTURE
MAGIC
Brigh
tn
ess
Contrast
Sharpness
Response Time
HDMI Black Level
▶
:
:
:
: Faster
:
50
60
75
Normal
Low
HDMI Black Level
If you connect a DVD player or set-top box to the product using an HDMI cable, the contrast
and color may degrade making the picture look darker. If this is the case, correct the degraded
picture quality using the HDMI Black Level menu.
ConguringHDMI Black Level
1. Press [
] on the product.
2. Move to PICTURE using the [ ] buttons. Next, press the [ ] button.
3. Move to HDMI Black Level using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
• Normal: Set the brightness of the darkest parts of the screen to be normal.
• Low: Set the brightness of the darkest parts of the screen to be darker than Normal mode.
4. Press [ ] to move to the option you want and press [ ].
5. The selected option will be applied.
NOTE
• Available only when the product is connected to a source device using an HDMI cable.
• The HDMI Black Level function may not be compatible with some source devices.
55
SAMSUNG
MA
GI C
SAMSUNG
MA
GI C
Chapter. 7
ConguringtheTintSettings
Adjust t h e t i n t of the scr e e n . I n formation i n t h i s chapter is n o t a p p l i cable if
Bright is in Cinema or Dynamic Contrast mode.
Red
Adjust the value of the color red in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
NOTE
Not available if
ConguringRed
Color is in Full or Intelligent mode.
1. Press [
] on the product.
2. Move to COLOR using the [ ] buttons. Next, press the [ ] button.
3. Move to Red using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
COLOR
Red
Green
Blue
Color Tone
Gamma
Return Adjust Enter
:
:
:
:
Normal
:
Mode1
50
50
50
4. Adjust the Red setting using the [ ] buttons.
56
Configuring the Tint Settings
SAMSUNG
MA
GI C
SAMSUNG
MA
GI C
Green
Adjust the value of the color green in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
NOTE
Not available if
ConguringGreen
1. Press [
2. Move to COLOR using the [ ] buttons. Next, press the [ ] button.
3. Move to Green using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
4. Adjust the Green setting using the [ ] buttons.
Color is in Full or Intelligent mode.
] on the product.
COLOR
Red
Green
Blue
Color Tone
Gamma
Return Adjust Enter
:
:
:
:
Normal
:
Mode1
50
50
50
Blue
Adjust the value of the color blue in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
NOTE
Not available if
ConguringBlue
1. Press [
2. Move to COLOR using the [ ] buttons. Next, press the [ ] button.
3. Move to Blue using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
4. Adjust the Blue setting using the [ ] buttons.
Color is in Full or Intelligent mode.
] on the product.
COLOR
Red
Green
Blue
Color Tone
Gamma
Return Adjust Enter
:
:
:
:
Normal
:
Mode1
50
50
50
57
Configuring the Tint Settings
SAMSUNG
MA
GI C
Color Tone
NOTE
Not available if
ConguringColor Tone
1. Press [
2. Move to COLOR using the [ ] buttons. Next, press the [ ] button.
3. Move to Color Tone using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
• Cool 2: Set the color temperature to be cooler than Cool 1 mode.
• Cool 1: Set the color temperature to be cooler than Normal mode.
• Normal: Display the standard color tone.
• Warm 1: Set the color temperature to be warmer than Normal mode.
• Warm 2: Set the color temperature to be warmer than Warm1 mode.
• Custom: Customize the color tone.
4. Press [ ] to move to the option you want and press [ ].
Color is in Full or Intelligent mode.
] on the product.
COLOR
Red
Green
Blue
Color Tone
Gamma
Return EnterAdjust
:
:
:
:
Cool 2
Cool 1
:
Normal
Warm 1
Warm 2
Custom
50
50
50
Gamma
Adjust the mid-range brightness (Gamma) of the picture.
ConguringGamma
1. Press [
2. Move to COLOR using the [ ] buttons. Next, press the [ ] button.
3. Move to Gamma using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
4. Press [ ] to move to the option you want and press [ ].
5. The selected option will be applied.
] on the product.
COLOR
Red
Green
Blue
Color Tone
Gamma
Return EnterAdjust
:
:
:
:
Normal
:
Mode1
Mode2
Mode3
50
50
50
5. The selected option will be applied.
58
Chapter. 8
Resizing or Relocating the Screen
Image Size
Change the picture size.
NOTE
The available Image Size menu options depend on the setting of PC/AV Mode under SETUP&RESET.
Conguring Image Size
1. Press [
2. Move to SIZE&POSITION using the [ ] buttons. Next, press the [ ] button.
3. Move to Image Size using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
• Auto: Display the picture according to the aspect ratio of the input source.
• Wide: Stretch the picture to full screen regardless of the aspect ratio of the input source.
] on the product.
SIZE&POSITION
Image Size
H-Position
V-Position
Menu H-Position
Menu V-Position
Return EnterAdjust
In PC mode
:
Auto
Wide
:
:
100
9
SIZE&POSITION
Image Size
H-Position
V-Position
Menu H-Position
Menu V-Position
Return EnterAdjust
:
4:3
16:9
Screen Fit
:
:
100
9
• 4:3 : This mode is suitable to view the 4:3 aspect ratio picture of video content or standard broadcasts.
• 16:9 : This mode is suitable to view the 16:9 aspect ratio picture of DVD content or widescreen
broadcasts.
• Screen Fit: This mode displays input without truncating the original picture.
NOTE
• PC/AV Mode is available in HDMI mode only.
• Adjusting the H-Position and V-Position settings is possible if Image Size is set to Screen Fit.
4. Press [ ] to move to the option you want and press [ ].
5. The selected option will be applied.
In AV mode
59
Resizing or Relocating the Screen
Return EnterMove
:
:
:
SIZE&POSITION
Image Size
H-Position
V-Position
Menu H-Position
Menu V-Position
9
100
Auto
Return EnterMove
:
:
:
SIZE&POSITION
Image Size
H-Position
V-Position
Menu H-Position
Menu V-Position
9
100
Auto
H-Position
Move the screen to the left or right.
NOTE
• Available only when PC/AV Mode is set to AV.
• PC/AV Mode is available in HDMI mode only.
ConguringH-Position
1. Press [
2. Move to SIZE&POSITION using the [ ] buttons. Next, press the [ ] button.
3. Move to H-Position using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
• Adjusting the H-Position and V-Position settings is possible if Image Size is set to Screen Fit.
4. Adjust the H-Position setting using the [ ] buttons.
] on the product.
V-Position
Move the screen up or down.
NOTE
• Available only when PC/AV Mode is set to AV.
• PC/AV Mode is available in HDMI mode only.
ConguringV-Position
1. Press [
2. Move to SIZE&POSITION using the [ ] buttons. Next, press the [ ] button.
3. Move to V-Position using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
• Adjusting the H-Position and V-Position settings is possible if Image Size is set to Screen Fit.
4. Adjust the V-Position setting using the [ ] buttons.
] on the product.
60
Resizing or Relocating the Screen
Return EnterAdjust
:
:
:
SIZE&POSITION
Image Size
H-Position
V-Position
Menu H-Position
Menu V-Position
9
100
Auto
Return EnterAdjust
:
:
:
SIZE&POSITION
Image Size
H-Position
V-Position
Menu H-Position
Menu V-Position
9
100
Auto
Menu H-Position
Move the menu position to the left or right.
ConguringMenu H-Position
1. Press [
2. Move to SIZE&POSITION using the [ ] buttons. Next, press the [ ] button.
3. Move to Menu H-Position using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
4. Adjust the Menu H-Position setting using the [ ] buttons.
] on the product.
Menu V-Position
Move the menu position up or down.
ConguringMenu V-Position
1. Press [
2. Move to SIZE&POSITION using the [ ] buttons. Next, press the [ ] button.
3. Move to Menu V-Position using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
4. Adjust the Menu V-Position setting using the [ ] buttons.
] on the product.
61
Chapter. 9
Setup and Reset
HUB
Congure the settings to use the HUB function on the product.
NOTE
To open the HUB menu screen, press the [ ] button on the stand.
4. Move to Auto Wireless Detection using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
HUB
Series 7
Auto Wireless Detection
USB Super Charging
Select Source
Wireless ID
:
Off
On
:
한국어한국어
:
USB
:
H1A1000001
Auto Wireless Detection - for Series 7 only
If a PC connects to the product via the wireless-connection dongle, the product will
automatically detect the wireless connection and change the input source to Wireless
Connection mode.
Enabling/disabling Auto Wireless Detection
1. Press [
2. Move to SETUP&RESET using the [ ] buttons. Next, press the [ ] button.
3. Move to HUB using the [ ] buttons. Next, press the [ ] button.
NOTE
To open the OSD menu where you can adjust the HUB settings, press the [ ] button on the stand.
] on the product.
Return EnterAdjust
• Off: Disable Auto Wireless Detection.
• On: Automatically change the input source to Wireless Connection mode if a wireless connection is
detected by the product.
5. Press [ ] to move to the option you want and press [ ].
6. The selected option will be applied.
NOTE
Auto Wireless Detection is supported on Series 7 only.
62
Setup and Reset
USB Super Charging
Charge the battery of a connected source device quickly using the blue USB 3.0 port on the
product.
NOTE
• Setting USB Super Charging to On during a data transfer will stop the data transfer. If you set USB Super
Charging to Off, the standard charging and data transfer feature will be available.
When USB Super Charging is disabled, the USB connection indicator icon [
mobile device display. This does not mean that the mobile device is disconnected.
• The input source does not need to be changed.
• High-speed charging is possible using the [ ] port only. This port allows you to charge a mobile
device twice as fast compared to when charging using a standard USB port.
Enabling/disabling USB Super Charging
1. Press [
] on the product.
2. Move to SETUP&RESET using the [ ] buttons. Next, press the [ ] button.
3. Move to HUB using the [ ] buttons. Next, press the [ ] button.
4. Move to USB Super Charging using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
Series 5 Series 7
HUB
USB Super Charging
Select Source
:
Off
On
한국어
:
HUB
Auto Wireless Detection
USB Super Charging
Select Source
Wireless ID
] will not be shown on the
:
Off
:
Off
On
:
: H1A1000001
Select Source
Select the input source that will be displayed on the product.
Changing the input source using Select Source
1. Press [
2. Move to SETUP&RESET using the [ ] buttons. Next, press the [ ] button.
3. Move to HUB using the [ ] buttons. Next, press the [ ] button.
4. Move to Select Source using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
• HDMI: Change the input source to HDMI mode.
• USB: Change the input source to USB mode.
• Wireless Connection: Change the input source to Wireless Connection mode.
• MHL: Change the input source to MHL mode.
5. Press [ ] to move to the option you want and press [ ].
6. The selected option will be applied.
] on the product.
HUB
USB Super Charging
Select Source
Return EnterAdjust
Series 5 Series 7
HUB
:
Off
:
HDMI
USB
MHL
Auto Wireless Detection
USB Super Charging
Select Source
Wireless ID
Return EnterAdjust
:
:
:
Off
Off
HDMI
USB
Wireless Connection
MHL
Return EnterAdjust
Return EnterAdjust
• Off: Disable USB Super Charging.
• On: Enable the function to quickly charge a source device connected to the blue USB 3.0 port.
5. Press [ ] to move to the option you want and press [ ].
6. The selected option will be applied.
NOTE
Wireless Connection is supported on Series 7 only.
63
Setup and Reset
Return EnterAdjust
SETUP&RESET
HUB
Eco Saving
Menu Transparency
Language
PC/AV Mode
Auto Source
Display Time
▶
:
:
:
▶
:
:
해제
동작
English
Manual
20 sec
Off
75%
50%
Wireless ID - for Series 7 only
Wireless ID refers to a unique ID assigned to each product. The Wireless Connection
Manager program identies products within an effective range by detecting this unique ID of
each product. The wireless ID is displayed at the bottom of the HUB menu screen and in the
Wireless Connection Manager program.
Viewing the Wireless ID
1. Press [
2. Move to SETUP&RESET using the [ ] buttons. Next, press the [ ] button.
3. Move to HUB using the [ ] buttons. Next, press the [ ] button.
4. Move to Wireless ID using the [ ] buttons. Next, press the [ ] button.
5. The Wireless ID will appear.
NOTE
Wireless ID is supported on Series 7 only.
] on the product.
Wireless ID
Return EnterAdjust
:
AL5721-DWA-0807D5
Eco Saving
Adjust the power consumption of the product to save energy.
ConguringEco Saving
1. Press [
2. Move to SETUP&RESET using the [ ] buttons. Next, press the [ ] button.
3. Move to Eco Saving using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
• 75% : Reduce the power consumption of the product to 75%.
• 50% : Reduce the power consumption of the product to 50%.
• Off: Disable Eco Saving.
4. Press [ ] to move to the option you want and press [ ].
] on the product.
5. The selected option will be applied.
64
Setup and Reset
Return EnterAdjust
SETUP&RESET
HUB
Eco Saving
Menu Transparency
Language
PC/AV Mode
Auto Source
Display Time
▶
:
:
:
▶
:
:
Off
동작
한국어
Manual
20 sec
Off
On
Return EnterMove
:
:
:
:
:
SETUP&RESET
해제
동작
한국어
수동
20 초
HUB
Eco Saving
Menu Transparency
Language
PC/AV Mode
Auto Source
Display Time
Deutsch
English
Español
Français
Italiano
Magyar
Polski
Português
Русский
Svenska
Türkçe
한국어
汉语
日本語
Menu Transparency
Congure the transparency for the menu windows.
ConguringMenu Transparency
1. Press [
2. Move to SETUP&RESET using the [ ] buttons. Next, press the [ ] button.
3. Move to Menu Transparency using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
4. Press [ ] to move to the option you want and press [ ].
5. The selected option will be applied.
] on the product.
Language
Set the menu language.
NOTE
• A change to the language setting will only be applied to the onscreen menu display.
• It will not be applied to other functions on your PC.
ConguringLanguage
1. Press [
2. Move to SETUP&RESET using the [ ] buttons. Next, press the [ ] button.
3. Move to Language using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
4. Press [ ] to move to the option you want and press [ ].
] on the product.
5. The selected option will be applied.
65
Setup and Reset
Return EnterAdjust
:
PC/AV Mode
HDMI
PC
AV
Return EnterAdjust
SETUP&RESET
HUB
Eco Saving
Menu Transparency
Language
PC/AV Mode
Auto Source
Display Time
▶
:
:
:
▶
:
:
Off
On
English
수동
20 초
Auto
Manual
PC/AV Mode
Set PC/AV Mode to AV. The size of the image displayed on the screen will be enlarged.
This option is useful when viewing a movie.
NOTE
PC/AV Mode is available in HDMI mode only.
ConguringPC/AV Mode
1. Press [
2. Move to SETUP&RESET using the [ ] buttons. Next, press the [ ] button.
3. Move to PC/AV Mode using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
4. Press [ ] to move to the option you want and press [ ].
] on the product.
Auto Source
Enable/disable Auto Source mode that detects the input source automatically.
ConguringAuto Source
1. Press [
2. Move to SETUP&RESET using the [ ] buttons. Next, press the [ ] button.
3. Move to Auto Source using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
• Auto: Automatically detect the input source.
• Manual: Manually select an input source.
4. Press [ ] to move to the option you want and press [ ].
5. The selected option will be applied.
] on the product.
5. The selected option will be applied.
66
Setup and Reset
Return EnterAdjust
SETUP&RESET
HUB
Eco Saving
Menu Transparency
Language
PC/AV Mode
Auto Source
Display Time
▶
:
:
:
:
:
Off
On
English
수동
20 초
5 sec
10 sec
20 sec
200 sec
Return EnterAdjust
Key Repeat Time
Off Timer On/Off
Off Timer Setting
Reset
:
:
:
Acceleration
1 sec
2 sec
No Repeat
SETUP&RESET
Display Time
Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for
a specied period of time.
Display Time can be used to set the time after which you want the OSD menu to disappear
automatically.
ConguringDisplay Time
1. Press [
2. Move to SETUP&RESET using the [ ] buttons. Next, press the [ ] button.
3. Move to Display Time using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
• 5 sec - 10 sec - 20 sec - 200 sec
4. Move to the desired option using the [ ] buttons. Next, press the [ ] button.
] on the product.
Key Repeat Time
Control the response rate of a button when the button is pressed.
ConguringKey Repeat Time
1. Press [
2. Move to SETUP&RESET using the [ ] buttons. Next, press the [ ] button.
3. Move to Key Repeat Time using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
• The available options include Acceleration, 1 sec, and 2 sec. If No Repeat is selected, a button will
respond only when it is pressed.
4. Press [ ] to move to the option you want and press [ ].
5. The selected option will be applied.
] on the product.
5. The selected option will be applied.
67
Setup and Reset
Return EnterAdjust
Key Repeat Time
Off Timer On/Off
Off Timer Setting
Reset
: Acceleration
:
Off
On
SETUP&RESET
Return EnterAdjust
Key Repeat Time
Off Timer On/Off
Off Timer Setting
Reset
SETUP&RESET
: Acceleration
: On
: 동작
4h
→
Off Timer On/Off
You can set the product to automatically turn off.
ConguringOff Timer On/Off
1. Press [
2. Move to SETUP&RESET using the [ ] buttons. Next, press the [ ] button.
3. Move to Off Timer On/Off using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
• Off: Deactivate the off timer so that the product does not power off automatically.
• On: Activate the off timer so that the product powers off automatically.
4. Press [ ] to move to the option you want and press [ ].
5. The selected option will be applied.
] on the product.
Off Timer Setting
The off timer can be set within a range of 1 to 23 hours. The product will automatically power
off after the specied number of hours.
NOTE
Available only when Off Timer On/Off is set to On.
ConguringOff Timer Setting
1. Press [
2. Move to SETUP&RESET using the [ ] buttons. Next, press the [ ] button.
3. Move to Off Timer Setting using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
4. Congure the Off Timer Setting [ ] buttons.
] on the product.
NOTE
For products for the market in Europe, the Off Timer On/Off is set to automatically activate 4 hours after
the product powers on. This is done in accordance with power supply regulations. If you do not want the
timer to activate, go to MENU
SETUP&RESET and set Off Timer On/Off to Off.
68
Setup and Reset
Reset all settings?
Yes No
Return EnterAdjust
Reset
Return all the settings for the product to the default factory settings.
Restoring the default settings (Reset)
1. Press [
2. Move to SETUP&RESET using the [ ] buttons. Next, press the [ ] button.
3. Move to Reset using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
4. Press [ ] to move to the option you want and press [ ].
5. The selected option will be applied.
] on the product.
69
Contrast
75
:
Exit EnterAdjust
Brightness
100
:
Chapter. 10
INFORMATION Menu and Others
INFORMATION
View the current input source, frequency and resolution.
Viewing information (INFORMATION)
1. Press [
2. Move to INFORMATION using the [ ] buttons. The current input source, frequency and
resolution will appear.
] on the product.
PICTURE
COLOR
SIZE&POSITION
SETUP&RESET
INFORMATION
Exit
USB
67.5kHz 60Hz PP
1920 x 1080
Optimum Mode
1920 x 1080 60Hz
EnterMove
ConguringBrightnessandContrast
in the Initial Screen
Adjust the Brightness or Contrast setting using the [ ] buttons in the initial screen (where
no OSD menu is displayed).
1. Press [ ] when the initial screen is displayed. The following screen will appear.
2. Press the [ ] button to alternate between the Brightness and Contrast settings.
3. Adjust the Brightness or Contrast setting using the [ ] buttons.
70
INFORM ATION Me n u a n d O t hers
Volume
100
:
Exit EnterAdjust
ConguringVolumeintheInitial
Screen
Adjust the Volume setting using the [ ] buttons in the initial screen (where no OSD menu is
displayed).
1. Press [ ] when the initial screen is displayed. The following screen will appear.
2. Adjust the Volume setting using the [ ] buttons.
NOTE
The speaker function is available on Series 7 only. To listen to the sound on Series 5, connect an audio
output device (headphones, etc.).
ConguringHUBintheInitialScreen
Press the [ ] button on the stand when no OSD menu is displayed. The HUB menu window
will be displayed.
1. Press [ ] when the initial screen is displayed.
You can change the Auto Wireless Detection, USB Super Charging and Select Source
settings or view the Wireless ID.
2. Congure the settings as required using the [ ] buttons.
NOTE
• Refer to "HUB" for further details on how to use the HUB function.
• The Auto Wireless Detection and Wireless ID functions are supported on Series 7 only.
71
Chapter. 11
Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Center
Before calling Samsung Customer Service Center, test your product as follows.
If the problem persists, contact Samsung Customer Service Center.
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen is turned off and the power indicator blinks even though the product is properly
connected to a PC, perform a self-diagnosis test.
1. Power off both the PC and product.
2. Disconnect the cables from the product.
3. Power on the product.
4. If the message "Check Signal Cable" appears, the product is working normally.
NOTE
If the screen remains blank, check the PC system, video controller and cable.
Checking the Resolution and Frequency
When a mode exceeds the supported resolution (refer to “Standard Signal Mode Table”), the
message "Not Optimum Mode" will appear briey.
Check the following.
Installation issue (PC mode)
TROUBLESHOOTING SOLUTIONS
The screen keeps
switching on and off.
Screen issue
TROUBLESHOOTING SOLUTIONS
The power LED is off.
The screen will not
switch on.
The message "Check
Signal Cable" appears.
Check that the cables are properly connected between the
product and PC and that the connectors are rmly locked.
Make sure that the power cable is connected.
Check that the cable is properly connected to the product.
Check that the device connected to the product is powered on.
72
Trouble s h o o t i n g Guide
TROUBLESHOOTING SOLUTIONS
The message "Not
Optimum Mode. "
appears on the screen.
The images on the
screen look distorted.
The screen is not clear.
The screen is blurry.
The screen appears
unstable and shaky.
There are shadows or
ghost images left on the
screen.
The screen is too bright.
The screen is too dark.
Screen color is
inconsistent.
The colors on the screen
have a shadow and are
distorted.
White does not really
look white.
There is no image on the
screen and the power
LED blinks every 0.5 to 1
second.
This message appears if the signal from the graphics card
exceeds the maximum resolution or frequency for the product.
Set the maximum resolution and frequency according to the
product specications referring to the Standard Signal Mode
Table.
Check the cable connection to the product
Remove components (video cable, etc.) and try again.
Set the resolution and frequency to the recommended level.
Check that the resolution and frequency of the PC and
graphics card are set within a range compatible with the
product. Then, change the screen settings if required by
referring to the additional information on the product menu.
Adjust the Brightness setting.
Adjust the COLOR settings.
Adjust the COLOR settings.
Adjust the COLOR settings.
The product is operating in power-saving mode.
Press any key on the keyboard or move the mouse to return
to normal operating mode.
Audio issues
* The integrated speaker is provided on Series 7 only.
TROUBLESHOOTING SOLUTIONS
There is no sound. Check the connection of the stereo cable or adjust the volume.
Check that the source device connected to the product is
powered on.
The volume is too low. Adjust the volume.
If the volume is still low after turning it up to the maximum
level, adjust the volume on your PC sound card or software
program.
Source device issue
TROUBLESHOOTING SOLUTIONS
A beeping sound is heard
continuously when my
PC is booting.
Have your PC serviced if it makes a beeping sound when
booting.
Other issues
TROUBLESHOOTING SOLUTIONS
The stand generates
heat. Why is that? Does
this mean that the
product is defective?
The upper part of the stand may become slightly hot at room
temperature. This occurs as the heat inside the stand releases
naturally. The intensity of heat you feel can vary depending on
whether the room is sealed or depending on the surrounding
temperature. This does not indicate a defect. You can use the
product without worry.
It is recommended to use the product in a location that offers
good ventilation at the back of the monitor stand.
73
Trouble s h o o t i n g Guide
Troubleshooting Guide
The Wireless Connection screen - for Series 7 only
The screen is blank although Wireless Connection is activated.
Symptom: Wireless Connection does not work although the product is powered on.
1. Press the [ ] button on the product to
check the input source.
2. Check the connection of the wirelessconnection dongle.
3. Check the connection of the product. Run Wireless Connection Manager to
Press the [
input source is set to Wireless Connection.
If the input source is not set to Wireless
Connection, press the [
congure the input source.
Check that the dongle is properly
connected.
Run Wireless Connection Manager.
Next, press the shortcut keys (Ctrl+P+Q)
to check that Host Enabled is displayed at
the bottom left.
check if the product is found in the list of
monitors. If the product is found, select
Connect and check if it is connected.
] button to check that the
] button to
USB screen
The USB screen is not displayed.
Symptom: The screen is blank although the power is turned on and the cables are
connected.
1. Press the [ ] button on the product to
check the input source.
2. Check the cable connection. Check that the USB cable is properly
Press the [
input source is set to USB.
If the input source is not set to USB, press
the [
source.
connected to the product and PC.
] button to check that the
] button to congure the input
Mobile Control and MHL
Should the PC be turned on in order to use
Mobile Control?
The Mobile Control feature allows sharing
of a keyboard, mouse and les between
a PC and mobile device. Use of Mobile
Control is not possible if your PC is turned
off.
4. Check the driver and update status. If Wireless Connection does not work
properly, update the driver to the latest
version from www.samsung.com.
74
Trouble s h o o t i n g Guide
What are the different kinds of mobile
devices that are compatible with Mobile
Control?
Can I use a standard USB cable instead
of the one provided in the package when
using Mobile Control?
Most of the devices that provide the host
function are compatible with Mobile
Control. Compatible devices include PCs
that support the Windows operating system
and Samsung Galaxy S2 series and later.
To nd whether your device supports the
host function, contact the manufacturer.
NOTE
• Mobile Control supports the keyboard and
mouse function for mobile devices allowing the
product to interact with a connected mobile
device.
• For some mobile devices, only a single function
(keyboard function, etc.) from a range of
functions of Mobile Control may be available.
To nd whether your device supports the
keyboard and mouse functions, contact the
manufacturer.
• Mobile Control supports only mobile devices
that have the USB Host function. Support for
this feature depends on the specications of
your mobile device.
• Galaxy S2 is supported. Galaxy S2 from Sprint
(available in the US market) is not supported
because it does not have the USB Host
function.
Mobile Control activates the host function
on a mobile device and shares data
between devices. To use Mobile Control
properly, you must use the provided mobile
cable to connect your mobile device to the
MOBILE port.
If using a standard USB cable, the Mobile
Control function will not be available.
Q & A
QUESTION ANSWER
How can I change the
frequency?
How can I change the
resolution?
Set the frequency on your graphics card.
• Windows XP: Go to Control Panel
Display
Refresh rate under Monitor settings.
• Windows ME/2000: Go to Control Panel
Advanced
Monitor settings.
• Windows Vista: Go to Control Panel
Personalization
Advanced Settings → Monitor, and adjust Refresh rate under
Monitor settings.
• Windows 7: Go to Control Panel
Personalization
Advanced settings
Monitor settings.
• Windows XP: Go to Control Panel
Display
• Windows ME/2000: Go to Control Panel
Settings, and adjust the resolution.
• Windows Vista: Go to Control Panel
Personalization
adjust the resolution.
• Windows 7: Go to Control Panel
Personalization
the resolution.
Appearance and Themes
Settings
Monitor, and adjust Refresh rate under
Personalization
Display
Settings, and adjust the resolution.
Personalize
Display
Advanced
Screen Resolution
Monitor, and adjust Refresh rate under
Adjust Resolution, and adjust
Monitor, and adjust
Display
Appearance and
Display Settings
Appearance and
Appearance and Themes
Display
Appearance and
Display Settings, and
Appearance and
Settings
Can I use MHL and Mobile Control at the
same time?
Due to the structure of mobile devices, the
Micro USB port cannot transmit both the
USB data and MHL signal at the same time.
75
Trouble s h o o t i n g Guide
QUESTION ANSWER
How do I set power-
saving mode?
• Windows XP: Set power-saving mode in Control Panel
Appearance and Themes
Settings or BIOS SETUP on the PC.
• Windows ME/2000: Set power-saving mode in Control Panel
Display
• Windows Vista: Set power-saving mode in Control Panel
Appearance and Personalization
Saver Settings or BIOS SETUP on the PC.
• Windows 7: Set power-saving mode in Control Panel
Appearance and Personalization
Saver Settings or BIOS SETUP on the PC.
Screen Saver Settings or BIOS SETUP on the PC.
Display
Screen Saver
Personalize
Personalize
Screen
Screen
NOTE
Refer to the user manual for your PC or graphics card for further instructions on adjustment.
76
Chapter. 12
Specications
General
Model Name
Panel
Synchronization
Display Color
Resolution
Maximum Pixel Clock
Size
Display
area
Horizontal
Frequency
Vertical
Frequency
Optimum
Resolution
Maximum
Resolution
C24B550U C24B750X C27B750X
24 inches
(61 cm)
531.36 mm (H)
x 298.89 mm (V)
/ 20.9 inches (H)
x 11.8 inches (V)
30 ~ 81 kHz
49 ~ 75 Hz
16.7M (RGB 8-bit)
1920 x 1080
1920 x 1080
165 MHz (Digital, USB)
24 inches
(61 cm)
531.36 mm (H)
x 298.89 mm (V)
/ 20.9 inches (H)
x 11.8 inches (V)
27 inches
(69 cm)
597.6 mm (H) x
336.15 mm (V) /
23.5 inches (H) x
13.2 inches (V)
Ports
HDMI input resolution
Dimensions
(W x H x D) / Weight
Environmental
conditions
Panel Dots (Pixels)
Side
Rear View
Operating
Storage
Mobile connect (20p), 3.0 USB downstream (Super charging
available), 3.0 USB downstream, 2.0 USB Downstream,
Headphone out.
DC Jack, USB 3.0 upstream, LAN Jack, HDMI
1920 x 1080
572.8 x 427.3 x
232.9 mm (22.6
x 16.9 x 9.2
inches) / 4.1 kg
(9.0 Ibs)
Temperature : 50 ˚F ~ 122 ˚F (10 ˚C ~ 50 ˚C)
Humidity: 10% – 90%, non-condensing
Temperature : -4 ˚F ~ 113 ˚F (-20 ˚C ~ 45 ˚C)
Humidity : 5 % – 90 %, non-condensing
Due to the nature of the manufacturing of this product,
approximately 1 pixel per million (1ppm) may be brighter
or darker on the LCD panel. This does not affect product
performance.
572.8 x 427.3 x
232.9 mm (22.6
x 16.9 x 9.2
inches) / 4.1 kg
(9.0 Ibs)
646.7 x 472.3 x
232.9 mm (25.5
x 18.6 x 9.2
inches) / 5.0 kg
(11.0 Ibs)
Power Supply
This product uses 100 to 240V.
Refer to the label at the back of the product as the
standard voltage can vary in different countries.
77
Specifications
The above specications are subject to change without notice to improve quality.
This device is a Class B digital apparatus.
(USA Only)
Dispose unwanted electronics through an approved recycler.
To nd the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
Wireless transmitter/receiver - for Series 7 only
The wireless equipment mentioned below may cause interference and should not be used
for services where personal safety is at risk.
Device name (model
name)
Authorization number SEC-CRM-SEC-CY-WDCA7UT
Authorized to Samsung Electronics Co., Ltd.
Manufactured by Samsung Electronics Co., Ltd.
UWB/undesignated-purpose device (device that uses the UWB
technology), (CY-WDCA7UT)
PowerSaver
The power-saving function of this product reduces power consumption by switching off the
screen and changing the color of the power LED if the product is not used for a specied
period of time. The power is not turned off in power-saving mode. To switch the screen back
on, press any key on the keyboard or move the mouse. Power-saving mode functions only
when the product is connected to a PC that has a power-saving function.
NORMAL
POWERSAVER
Power lamp On Blinking Off
C24B550U 38.0 W less than 0.8 W less than 0.3 W
POWER
CONSUMPTION
The power consumption level can vary in different operating conditions or when settings
are changed.
To reduce the power consumption to 0 watts, turn off the power switch on the back of
the product or disconnect the power cable. Be sure to disconnect the power cable when
you will not be using the product for an extended period of time. To reduce the power
consumption to 0 watts when the power switch is not available, disconnect the power
cable.
C24B750X 38.0 W less than 0.8 W less than 0.3 W
C27B750X 40.0 W less than 0.7 W less than 0.3 W
OPERATION
MODE
(HDMI MODE)
POWER SAVING
MODE
POWER TURNED
OFF
(POWER BUTTON)
78
Specifications
Preset Timing Modes
This product can be set to only one resolution for each screen size to obtain the optimum
picture quality due to the nature of the panel. Therefore, a resolution other than the
specied resolution may degrade the picture quality. To avoid this, it is recommended that
you select the optimum resolution specied for the screen size of your product.
If a signal that belongs to the following standard signal modes is transmitted from your PC,
the screen will automatically be adjusted. If the signal transmitted from the PC does not
belong to the standard signal modes, the screen may be blank even though the power LED
turns on. In such a case, change the settings according to the following table by referring to
the graphics card user manual.
HORIZONTAL
RESOLUTION
FREQUENCY
(KHZ)
VESA, 640 x 480 31.469 59.940 25.175 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 1024 x 768 48.363 60.004 65.000 -/-
VESA, 1280 x 800 49.702 59.810 83.500 -/+
VESA, 1280 x 960 60.000 60.000 108.000 +/+
VESA, 1280 x 1024 63.981 60.020 108.000 +/+
VERTICAL
FREQUENCY
(HZ)
CLOCK
FREQUENCY
(MHZ)
SYNC
POLARITY
(H/V)
Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called
a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency.
Horizontal frequency is measured in kHz.
Vertical Frequency
Repeating the same picture dozens of times per second allows you to view natural pictures.
The repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.
Specicationsofthedonglethat
connects to a PC - for Series 7 only
Standard UWB (Ultra Wide Band)
Host interface USB 2.0 downstream interface
Frequency range 3.1GHz – 10.6GHz (Operating at 3.16GHz – 8.97GHz, BG1, BG2,
BG6)
Security AES128
Data transmission rate 53.3 to 480 Mbps
Sensitivity/Power output Transmission signal PSD -41.3 dBm/MHz (limit: -41.3dBm/MHz)
Power consumption 1.18 watts (Typical), 4095-length packet, TFC1, Band Group 3,
480 Mbps
VESA, 1440 x 900 55.935 59.887 106.500 -/+
VESA, 1600 x 1200 75.000 60.000 162.000 +/+
VESA, 1680 x 1050 65.290 59.954 146.250 -/+
VESA, 1920 x 1080 67.500 60.000 148.500 +/+
Supported models C24B750X / C27B750X
Dimensions 7 mm x 19 mm x 24.5 mm
79
Chapter. 13
Appendix
Contact SAMSUNG WORLDWIDE
NOTE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care Center.
NORTH AMERICA
U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com
CANADA 1-800-SAMSUNG (726-7864)
MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com
LATIN AMERICA
ARGENTINA 0800-333-3733 http://www.samsung.com
BRAZIL
BOLIVIA 800-10-7260 http://www.samsung.com
CHILE
0800-124-421
4004-0000
800-SAMSUNG (726-7864)
From mobile 02-482 82 00
http://www.samsung.com/ca
http://www.samsung.com/ca_fr (French)
http://www.samsung.com
http://www.samsung.com
COSTA RICA 0-800-507-7267 http://www.samsung.com
DOMINICA 1-800-751-2676 http://www.samsung.com
ECUADOR 1-800-10-7267 http://www.samsung.com
EL SALVADOR 800-6225 http://www.samsung.com
GUATEMALA 1-800-299-0013 http://www.samsung.com
HONDURAS 800-27919267 http://www.samsung.com
JAMAICA 1-800-234-7267 http://www.samsung.com
NICARAGUA 00-1800-5077267 http://www.samsung.com
PANAMA 800-7267 http://www.samsung.com
PERU 0-800-777-08 http://www.samsung.com
PUERTO RICO 1-800-682-3180 http://www.samsung.com
TRINIDAD &
TO-BAGO
VENEZUELA 0-800-100-5303 http://www.samsung.com
1-800-SAMSUNG (726-7864) http://www.samsung.com
COLOMBIA 01-8000112112 http://www.samsung.com
80
Appendix
EUROPE
ALBANIA 42 27 5755 http://www.samsung.co
AUSTRIA
BELGIUM 02-201-24-18
BOSNIA 05 133 1999 http://www.samsung.com
BULGARIA 07001 33 11 http://www.samsung.com
CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com
CZECH
DENMARK 70 70 19 70 http://www.samsung.com
FINLAND 030 - 6227 515 http://www.samsung.com
FRANCE 01 48 63 00 00 http://www.samsung.com
GERMANY
CYPRUS From landline : 8009 4000 http://www.samsung.com
GREECE
HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com
0810 - SAMSUNG (7267864,€
0.07/min)
800-SAMSUNG(800-726786) http://www.samsung.com
Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská
394/17, 180 00, Praha 8
01805 - SAMSUNG
(726-7864, € 0,14/Min)
From landline : 80111-SAM-SUNG
(7267864)
From landline & mobile : (+30)
210 6897691
http://www.samsung.com
http://www.samsung.com/be(Dutch)
http://www.samsung.com/ be_fr
(French)
http://www.samsung.com
http://www.samsung.com
ITALIA 800-SAMSUNG (726-7864) http://www.samsung.com
KOSOVO +381 0113216899 http://www.samsung.com
LUXEMBURG 261 03 710 http://www.samsung.com
MACEDONIA 023 207 777 http://www.samsung.com
MONTENEGRO 020 405 888 http://www.samsung.com
NETHERLANDS
NORWAY 815-56 480 http://www.samsung.com
POLAND
PORTUGAL 808 20-SAMSUNG (808 20 7267) http://www.samsung.com
RUMANIA
SERBIA 0700 SAMSUNG (0700 726 7864) http://www.samsung.com
SLOVAKIA 0800 - SAMSUNG (0800-726786) http://www.samsung.com
SPAIN
SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com
SWITZERLAND
U.K 0330 SAMSUNG (7267864) http://www.samsung.com
0900-SAMSUNG
(0900-7267864) ( € 0,10/Min)
0 801-1SAMSUNG(172-678)
+48 22 607-93-33
From landline : 08010-SAM-SUNG
(7267864)
From landline & mobile : (+40)
21 206 01 10
902 - 1 - SAMSUNG (902 172
678)
0848 - SAMSUNG (7267864,CHF
0.08/min)
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com/ch_fr/
(French)
81
Appendix
EIRE 0818 717100 http://www.samsung.com
LITHUANIA 8-800-77777 http://www.samsung.com
LATVIA 8000-7267 http://www.samsung.com
ESTONIA 800-7267 http://www.samsung.com
TURKEY 444 77 11 http://www.samsung.com
CIS
RUSSIA 8-800-555-55-55 http://www.samsung.com
GEORGIA 8-800-555-555 http://www.samsung.com
ARMENIA 0-800-05-555 http://www.samsung.com
AZERBAIJAN 088-55-55-555 http://www.samsung.com
KAZAKHSTAN 8-10-800-500-55-500 (GSM:7799) http://www.samsung.com
UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com
KYRGYZSTAN 00-800-500-55-500 http://www.samsung.com
TADJIKISTAN 8-10-800-500-55-500 http://www.samsung.com
MONGOLIA - http://www.samsung.com
UKRAINE 0-800-502-000
BELARUS 810-800-500-55-500 http://www.samsung.com
MOLDOVA 00-800-500-55-500 http://www.samsung.com
http://www.samsung.com/ua
http://www.samsung.com/ua_ru
ASIA PACIFIC
AUSTRALIA 1300 362 603 http://www.samsung.com
NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com
CHINA 400-810-5858 http://www.samsung.com
http://www.samsung.com/hk
HONG KONG (852) 3698 - 4698
1800 1100 11
INDIA
INDONESIA
JAPAN 0120-327-527 http://www.samsung.com
MALAYSIA 1800-88-9999 http://www.samsung.com
PHILIPPINES
SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com
3030 8282
1800 3000 8282
1800 266 8282
0800-112-8888
021-5699-7777
1-800-10-SAMSUNG (726-7864)
for PLDT
1-800-3-SAMSUNG (726-7864) for
Digitel
1-800-8-SAMSUNG (726-7864) for
Globe
02-5805777
http://www.samsung.com/
hk_en/
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
THAILAND
1800-29-3232
02-689-3232
http://www.samsung.com
82
Appendix
TAIWAN
VIETNAM 1 800 588 889 http://www.samsung.com
0800-329-999
0266-026-066
http://www.samsung.com
MIDDLE EAST
IRAN 021-8255 http://www.samsung.com
OMAN 800-SAMSUNG (726-7864) http://www.samsung.com
KUWAIT 183-2255 http://www.samsung.com
BAHRAIN 8000-4726 http://www.samsung.com
EGYPT 08000-726786 http://www.samsung.com
JORDAN 800-22273 http://www.samsung.com
MOROCCO 080 100 2255 http://www.samsung.com
SAUDI ARABIA 9200-21230 http://www.samsung.com
U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com
AFRICA
CAMEROON 7095- 0077 http://www.samsung.com
COTE D’LVOIRE 8000 0077 http://www.samsung.com
GHANA
KENYA 0800 724 000 http://www.samsung.com
NIGERIA 0800-726-7864 http://www.samsung.com
SENEGAL 800-00-0077 http://www.samsung.com
SOUTH AFRICA 0860-SAMSUNG (726-7864) http://www.samsung.com
TANZANIA 0685 88 99 00 http://www.samsung.com
UGANDA 0800 300 300 http://www.samsung.com
0800-10077
0302-200077
http://www.samsung.com
83
Appendix
Responsibility for the Pay Service (Cost to Customers)
NOTE
When the service is requested, in spite of in warranty, we may charge you for a visit from a service
technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
• If a service technician gives instructions on how to use product or simply adjusts options
without disassembling product.
• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal,
etc.)
• If a product is reinstalled or devices are connected additionally after installing the
purchased product for the rst time.
• If a product is reinstalled to move to a different spot or to move to a different house.
• If customer requests instructions on how to use because of another company's product.
• If customer requests instructions on how to use the network or another company's
program.
• If customer requests software installation and setup for the product.
• If a service technician removes/cleans dusts or foreign materials inside of the product.
• If customer requests an installation additionally after purchasing a product through home-
shopping or online.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair.
If a product damage is caused by;
• External impact or drop.
• Use of supplies or separatly sold product unspecied by Samsung.
• Repair from a person besides an engineer of outsourcing service company or partner of
Samsung Electronics Co., Ltd.
• Remodeling or repairing the product by customer.
• Using it with incorrect voltage or non-authorised electrical connections.
• Not following the "cautions" in User Manual.
Others
• If product fails by natural disaster (lightning, re, earthquake, ood damage, etc).
• If consumable components are all used up (Battery, Toner, Fluorescent lights, Head,
Vibrator, Lamp, Filter, Ribbon, etc.)
NOTE
If customer requests a service in case the product has no defect, service fee may be charged. So please
read User Manual rst.
84
Appendix
Correct Disposal
Correct Disposal of This Product
(Applicable in the European Union and other European countries with separate
collection systems)
This marking on the product, accessories or literature indicates that the product and
its electronic accessories (e.g. charger, headset, USB cable) should not be disposed
of with other household waste at the end of their working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government ofce, for details of where and how they can take these
items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of
the purchase contract. This product and its electronic accessories should not be mixed
with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery
return systems.)
The marking on the battery, manual or packaging indicates that the battery in this
product should not be disposed of with other household waste. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium
or lead above the reference levels in EC Directive 2006/66.
The battery incorporated in this product is not user replaceable. For information on
its replacement, please contact your service provider. Do not attempt to remove the
battery or dispose it in a re. Do not disassemble, crush, or puncture the battery. If
you intend to discard the product, the waste collection site will take the appropriate
measures for the recycling and treatment of the product, including the battery.
Terminology
OSD(On Screen Display)
On screen display (OSD) allows you to customize on-screen settings to optimize the picture
quality as required. You can change the screen brightness, tint, size and many other settings
using menus displayed on the screen.
HUB
HUB refers to a device that is a common connection point for multiple devices connected over
a network. It is used to connect multiple PCs, video devices, ofce devices and/or LANs over a
single network.
Wireless-connection dongle - for Series 7 only
Dongle refers to a device that connects to an input/output port on a PC. It contains a security
key or ID so that only the user that connects the wireless dongle to their PC can access a
certain application. The wireless-connection dongle itself contains data required for a wireless
connection to work. It must be connected to your PC when a wireless connection is needed.
Gamma
The Gamma menu adjusts the grey scale that represents middle tones on the screen.
Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the
medium brightness.
85
Appendix
Grey scale
Scale refers to levels of color intensity that show variations of color change from darker areas
to brighter areas on the screen. Changes to the screen brightness are expressed with black
and white variation, and grey scale refers to the medium area between black and white.
Changing the grey scale through Gamma adjustment will change the medium brightness on
the screen.
Scanning rate
Scanning rate, or refresh rate, refers to the frequency of screen refreshes. Screen data is
transmitted as it refreshes to display an image, although the refreshing is invisible to the
naked eye. The number of screen refreshes is called scanning rate and is measured in Hz.
A scanning rate of 60Hz means that the screen refreshes 60 times per second. The screen
scanning rate depends on the performance of the graphics cards in your PC and monitor.
Horizontal Frequency
Characters or images displayed on the monitor screen consist of numerous dots (pixels).
Pixels are transmitted in horizontal lines, which are then arranged vertically to create
an image. The horizontal frequency is measured in kHz and represents how many times
horizontal lines per second are transmitted and displayed on the monitor screen. A horizontal
frequency of 85 means that the horizontal lines that make up an image are transmitted 85000
times per second. The horizontal frequency is indicated in 85kHz.
Resolution
Resolution is the number of horizontal pixels and vertical pixels that form a screen. It
represents the level of display detail. A higher resolution displays a greater amount of
information on the screen and is suitable for performing multiple tasks at the same time. E.g.
A resolution of 1920 x 1080 consists of 1920 horizontal pixels (horizontal resolution) and 1080
vertical lines (vertical resolution).
Plug & Play
The Plug & Play feature allows the automatic exchange of information between a monitor and
PC to produce an optimum display environment. The monitor uses VESA DDC (international
standard) to execute Plug & Play.
MHL(MobileHigh-DenitionLink)
The MHL feature allows you to view videos and photos (saved on a connected mobile device
that supports MHL) using the product screen.
Vertical Frequency
One image is made of numerous horizontal lines. The vertical frequency is measured in Hz
and represents how many images can be created per second by those horizontal lines. A
vertical frequency of 60 means that an image is transmitted 60 times per second. The vertical
frequency is also called "refresh rate" and affects screen icker.
86
Index
A
Auto Source 66
D
Disabling MHL 44
Display Time 67
L
Language 65
B
Blue 57
Brightness 53
C
Changing the Settings 40
Cleaning 7
Color Tone 58
Components 14
Conguring Brightness in
the Initial Screen 70
Conguring HUB in the
Initial Screen 71
Conguring Volume in the
Initial Screen 71
Connecting and Using a PC 46
Connecting a PC to the Smart
Station Monitor (Product) 24
Connecting to an Audio
Output Device 50
Connecting to a Video Device 50
Contrast 53
Copyright 5
Correct posture to use the
product 12
G
Gamma 58
General 77
Green 57
H
HDMI Black Level 55
H-Position 60
HUB 62
I
Image Size 59
INFORMATION 70
Items sold separately 14
K
Key Repeat Time 67
M
MAGIC 51
Menu H-Position 61
Menu Transparency 65
Menu V-Position 61
MHL 42
Monitor IP Setup 31
O
Off Timer On/Off 68
Off Timer Setting 68
P
Parts 15
PC/AV Mode 66
Power Consumption 78
PowerSaver 78
Preset Timing Modes 79
Q
Q & A 75
87
R
Red 56
Requirements Before
Contacting Samsung
Customer Service Center 72
Reset 69
Response Time 54
S
Safety Precautions 6
Sharpness 54
Software Installation for
Using Smart Station 21
T
Terminology 85
Troubleshooting Guide 72
V
V-Position 60
W
What is Mobile Control? 34
What is Smart Station? 19
Wireless transmitter/receiver 78
U
Unpacking the Smart Station 13
Using MHL 43
Using the Mobile Control 35
Using the Mobile-device
Holder 40
88
Loading...