Samsung LA70F91BD User Manual
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
LCD TV
LA70F9
Country
AUSTRALIA 1300 362 603 www.samsung.com/au
CHINA 800-810-5858
HONG KONG 3698-4698 www.samsung.com/hk
INDIA 3030 8282
INDONESIA 0800-112-8888 www.samsung.com/id
JAPAN 0120-327-527 www.samsung.com/jp
MALAYSIA 1800-88-9999 www.samsung.com/my
NEW ZEALAND 0800SAMSUNG(726-7864) www.samsung.com/nz
PHILIPPINES 1800-10-SAMSUNG(726-7864) www.samsung.com/ph
SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com/sg
THAILAND 1800-29-3232
TAIWAN 0800-329-999 www.samsung.com/tw
VIETNAM 1 800 588 889 www.samsung.com/vn
SOUTH AFRICA 0860-SAMSUNG(726-7864 ) www.samsung.com/za
U.A.E 800-SAMSUNG (726-7864)
Customer Care Centre
010-6475 1880
1800 110011
02-689-3232
8000-4726
Web Site
www.samsung.com.cn
www.samsung.com/in/
www.samsung.com/th
www.samsung.com/mea
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
BN68-01325A-01
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
•
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect
to the screen. Damages caused by the above effect are not covered by the Warranty.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
Contents
General Information
List of Parts ..................................................... 2
Installing the Wall Mount Kit ............................ 2
Control Panel ................................................. 3
Viewing the Connection Panel ........................ 4
Viewing the Remote Control ........................... 6
Installing Batteries in the Remote Control ....... 7
Operation
Switching On and Off ...................................... 7
Placing Your Television in Standby Mode .......7
Plug & Play Feature ........................................ 8
Viewing the Display ......................................... 9
Viewing the Menus ........................................10
Using the TOOLS Button .............................. 10
Viewing External Signal Sources .................. 11
Editing Device Names ................................... 12
Using the DTV Feature
Setting the Guide .......................................... 13
Setting the Default Guide .............................. 13
Checking the Digital-Signal Strength - Digital 14
Channel Control
Storing Channels Automatically .................... 14
Storing Channels Manually ........................... 15
Managing Channels ...................................... 16
Fine Tuning Channel Reception .................... 22
LNA (Low Noise Amplier) ............................23
Picture Control
Changing the Picture Standard ..................... 24
Customizing the Picture Settings .................. 25
Conguring Detailed Settings on the Picture 26
Selecting the Picture Size ............................. 27
Digital NR / Active Colour /
LED Smartlighting / DNIe .............................. 28
Freezing the Current Picture ......................... 28
Viewing Picture-in-Picture ............................. 29
Sound Control
Sound Features ............................................ 31
Selecting the Sound Mode (depending on the
model) ........................................................... 32
Function Description
Setting the Time ............................................ 33
Menu Transparency / Energy Saving /
HDMI Black Level / Film Mode /
Feature Demo / Light Effect / Blue Screen /
Melody / Function Help ................................. 35
Activating the Child Lock ............................... 36
Setting the Subtitle ........................................ 37
Using the Game Mode .................................. 38
Setting up the Parental Lock ......................... 39
Upgrading the Software ................................ 41
Over the Air Download .................................. 42
PC Display
Setting Up Your PC Software
(Based on Windows XP) ............................... 43
Display Modes .............................................. 43
Setting the PC ............................................... 44
Changing the Picture Size (PC Mode) .......... 45
Setting the Home theatre PC ........................ 45
WISELINK
Using the WISELINK Function ...................... 46
Using the WISELINK Mode ........................... 47
Using the Photo (JPEG) List ......................... 48
Using the Music (MP3) List ........................... 56
About Anynet+
What is Anynet+? .......................................... 59
Connecting Anynet+ Devices ........................ 59
Setting Up Anynet+ ....................................... 60
Scanning and Switching between Anynet+
Devices ......................................................... 61
Recording ...................................................... 62
Listening through a Home theatre ................. 63
Troubleshooting for Anynet+ ......................... 63
Appendix
Teletext Feature (depending on the model) .. 64
Setting Up Your Remote Control ................... 66
Remote Control Codes ................................. 68
Troubleshooting ............................................ 71
Technical and Environmental Specications 72
Symbol Press Note One-Touch
English - 1
Button
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control & Batteries
(AAA x 2)
Owner’s Instructions
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
➢
Power Cord Cover-Bottom Cleaning Cloth
Warranty card
Safety Guide
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage
to the product or injury to yourself or others
if you elect to install the TV on your own.
Do not install your Wall Mount Kit while your TV
is turned on. It may result in personal injury due
to electric shock.
Remove the stand and cover the bottom hole with a
➢
cap and fasten with two screws.
Registration Cards
English - 2
English - 3
Control Panel
8 78
4
5
6
The product colour and shape may vary depending on the model.
➢
Front Panel buttons
Touch the each button
to operate.
1 SOURCE
Toggles between all the available input
sources (TV, AV1, AV2, S-Video, Component1,
Component2, PC, HDMI1, HDMI2/DVI,
HDMI3, USB).
In the on-screen menu, use this button
as you use the ENTER/OK button on the
remote control.
2 MENU
Press
features.
3 - VOL +
Press
In the on-screen menu, use the - VOL +
buttons as you use the ◄ and ► buttons on
the remote control.
4
Press to change channels.
In the on-screen menu, use the
buttons as you use the ▼ and ▲ buttons on
the remote control.
(Without the Remote Control, you can turn on
the TV by using the Channel buttons.)
to see an on-screen menu of your TV’s
to decrease or increase the volume.
(Power)
5
Press to turn the TV on and off.
6 Remote Control Sensor
Aim
the remote control towards this spot on
the TV.
7 Power Indicator
Blinks
lights up in stand-by mode.
8 Speakers
and turns off when the power is on and
Viewing the Connection Panel
1 2 3 4
5
[Side Panel Jacks]
3
6
7
!
The product colour and shape may vary depending on the model.
➢
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
➢
The product colour and shape may vary depending on the model.
➢
1
VIDEO / AUDIO L/R
Video and audio inputs for external devices, such as a camcorder or VCR.
2
SERVICE
− Connector for service.
3
Connecting external Audio Devices
Connect RCA audio signals from the TV to an external source, such as Audio equipment.
Power Input
0
English - 4
9
8
English - 5
4
HDMI IN 1, HDMI IN 2, HDMI IN 3
− Connect to the HDMI jack of a device with HDMI output. These inputs can also be used as a DVI
connection with separate analog audio inputs. An optional HDMI/DVI cable will be necessary to
make this connection. When using the optional HDMI/DVI adapter, the DVI analog audio inputs on
your TV allow you to receive left and right audio from your DVI device. (Not compatible with PC)
−
When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console
etc, make sure that it has been set to a compatible video output mode as shown in the table below.
Failure to observe this may result in picture distortion, image breakup or no picture.
−
Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card.
(This will result in a blank screen being displayed)
DVI IN (HDMI
DVI audio outputs for external devices.
The external devices that support lower version HDMI mode may not implement sound ouput for
theTV with the latest HDMI version (HDMI 1.3.) In this case, connect to HDMI IN2 and DVI IN
(HDMI 2) “R-AUDIO-L” on the back panel of the TV.
Part of lower version HDMI cables may cause annoying flickers or no screen display in this case use
the cable that supports the latest HDMI version(HDMI 1.3).
Supported modes for HDMI and Component
HDMI/DVI 50Hz X X X O O O O
HDMI/DVI 60Hz X O X X O O O
5
ANT IN
75Ω Coaxial connector for Aerial/Cable Network.
6
WISELINK
- Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3).
7
Headphones jack
You can connect a set of headphones if you wish to watch a television programme without disturbing
the other people in the room.
➢
8
S-VIDEO or VIDEO / AUDIO L/R
- Video (S-Video or Video) and audio inputs for external devices, such as a camcorder or VCR.
9
PC IN / AUDIO
Connect to the video and audio output jack on your PC.
0
DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component. According to the received audio signal, optical output is
selectcted by Dobly or PCM signal. The level of sound can change according to received signal
and sound level’s difference can be.
!
COMPONENT IN 1, COMPONENT IN 2
Audio (AUDIO L/R) and video (Y/P
2) AUDIO L/R
480i 480p 576i 576p 720p 1080i 1080p
Component O O O O O O O
Prolonged use of headphones at a high volume may damage your hearing.
B/PR) inputs for Component.
Viewing the Remote Control
1
Display selected input
source and battery status
2
POWER button
(turns the TV on and off)
3
Number buttons for direct
channel access
4
One/Two/Three-digit channel
selection
5
Channel control button
(Refer to page 16)
6
This function enables you to
view and play photo (JPEG)
and audio files (MP3) from
an external device. (See
page 48 (JPEG), 56 (MP3))
7
Volume increase
Volume decrease
8
Temporary sound switch-off
9
Displays the main on-screen
menu
0
Returns to the previous
menu
#
Picture size selection
$
Electronic Program Guide
(EPG) display
%
Sound mode selection
^
Remote control setup
&
Make the remote control
works for TV, DVD, STB,
CATV, VCR (Refer to pages
66~70)
*
Press to backlight the VOL,
CH, MUTE and LED screen.
(
Available source selection
)
Previous channel
a
Press to switch to your
favourite channels.
b
Records for Live
Broadcasting
c
VCR/DVD Function
(Rewind, Stop, Play/Pause,
Fast/Forward)
d
Next channel
Previous channel
e
Exit the on-screen menu
f
Control the cursor in the
menu
g
Use to see information on
the current broadcast
h
TOOLS: Use to quickly
select frequently used
functions.
+
Anynet
: Runs the Anynet+
view functions and sets up
+
Anynet
i
Picture-In-Picture On/Off
j
Picture effect selection
k
Digital subtitle display
l
Picture freeze
m
If your remote control is not
Teletext Functions
(Refer to page 64)
9
Teletext index
0
Exit from the teletext display
!
Fastext topic selection
@
Teletext display/mix both
#
Teletext size
(
Teletext mode selection
)
Teletext sub page
d
P :Teletext next page
e
Teletext cancel
g
Teletext reveal
i
Teletext hold
j
Teletext store
devices.
(Refer to page 24)
functioning properly, take out
the batteries and press the
reset button for about 2~3
seconds.
Reinsert the batteries and
try using the remote control
again.
(depending on the model)
teletext information and the
normal broadcast
(LIST/FLOF)
P
:Teletext previous page
The performance of the remote control may be affected by bright light.
➢
This is a special remote control for the visually impaired persons, and has Braille points on the
➢
Power, Channel, Volume, STOP, and PLAY/PAUSE buttons.
English - 6
English - 7
Installing Batteries in the Remote Control
1 Lift the cover at the back of the remote control upward as shown in the
figure.
2 Install two
➢
3 Replace the cover
➢
➢
AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the
diagram inside the compartment.
.
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time. The remote control can be used
up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Switching On and Off
The main lead is attached to the rear of your set.
1 Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
➢
2 Press the
➢
➢
3 Press the numeric button (0~9) or channel up/down (
the right side of the set.
4 T
o switch your set off, press the POWER button again.
button on the front of the set.
You also can press the POWER button or the SOURCE button on the remote control to turn
the TV on.
The programme that you were watching last is reselected automatically.
/ ) button on the remote control or button on
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1 Press the POWER
The screen is turned off and a red standby indicator appears on the front of your set.
➢
o switch your set back on, simply press the POWER , numeric buttons (0~9), SOURCE button or
2 T
channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday,
➢
for example). It is best to unplug the set from the mains and aerial.
button on the remote control.
Plug & Play Feature
When the TV is initially powered on, basic settings
proceed automatically:
1 Press the POWER button on the remote control.
The message Runs the Plug & Play function when
setting the TV up for the first time or when resetting
it. Sets the channels, clocks, as well as other
functions. is automatically displayed.
2 The message Select Home Mode when installing this
TV at home. is automatically displayed.
3 Press the ◄ or ► button to select Shop or Home, then
press the ENTER/OK button.
The default selection is Home.
➢
We recommend setting the TV to Home mode for the
➢
best picture in your home environment.
Shop mode is only intended for use in retail
➢
environments.
If the unit is accidentally set to Shop mode, and you
➢
want to return to Dynamic (Home) mode, press the
Volume button and then hold down the MENU button
for five seconds on the TV panel.
4 The
TV will begin memorizing all of the available
channels.
After all the available channels are stored, the Auto
program menu reappears.
Press the ENTER/OK button when channel memorization
is complete.
The Clock Mode menu is displayed.
To stop the search before it has finished, press the
➢
ENTER/OK button with stop selected.
5 Press the ENTER/OK button.
Press the ▲ or ▼ button to select Manual for setting the
current time manually, then press the ENTER/OK button.
The message Set current date and time. is displayed.
If you select Auto. Select the time zone in which
➢
you live. is displayed, then go to step 8.
6 Press the ◄ or ► button to move to Month, Day, Year,
Hour, Minute, or am/pm. Set the date and time you want
by pressing the ▲ or ▼ button, then press the ENTER/
OK button.
You can set the month, day, year, hour, and minute
➢
directly by pressing the number buttons on the
remote control.
7 The message Enjoy your watching. is displayed.
When you have finished, press the ENTER/OK button.
Even if the ENTER/OK button is not pressed, the
➢
message will automatically disappear after several
seconds.
Plug & Play
Runs the Plug & Play function when setting the TV up
for the first time or when resetting it. Sets the
channels, clocks, as well as other functions.
OK
ExitEnter
Plug & Play
Select Home Mode when installing this TV at home.
Shop
Press Enter to start channel memory.
Auto Store in Progress.
6
Digital Channels are added on the favourite
channel list.
Auto Store is completed.
3 channels are memorized.
Digital:1 Analog:2
Set the Clock Mode.
Clock Mode : Auto
Set the Clock Mode.
Clock Mode : Auto
Set current date and time
Month
0 1
Hour
0 0
Move
Home
Move
Plug & Play
Start
Plug & Play
Digital Channel found: 0
Stop
Plug & Play
OK
Plug & Play
Plug & Play
Auto
Manual
Move
Plug & Play
Day
0 1
Minute
0 4
Enter Skip
Adjust
SkipEnter
0%
SkipEnter
3%
SkipEnter
SkipEnter
SkipEnter
SkipEnter
Year
2 0 07
am/pm
a m
English - 8
Continued...
English - 9
Setting the Clock Automatically
8 Press the ENTER/OK button.
Press the ▲ or ▼ button to select Off or On, then the
ENTER/OK button.
The message Select the time zone in which you live.
is displayed.
9 Press the ▲ or ▼ button to highlight the time zone
for your local area (and to move the highlight to the
appropriate time zone on the map of the United States).
Press the ENTER/OK button.
If clock is not automatically set, see pages 33~34. to set
Select the time zone in which you live.
New South Wales/ACT
Victoria
QueenSland
South Australia
West Australia
Tasmania
the clock.
1
0 The message Enjoy your watching. is displayed.
When you have finished, press the ENTER/OK button.
Even if the ENTER/OK button is not pressed, the
➢
message will automatically disappear after several
seconds.
Viewing the Display
The display identifies the current channel and the status of
certain audio-video settings.
Press the INFO button on the remote control.
Plug & Play
Move
Plug & Play
Enjoy your watching.
OK
SkipEnter
ATV
3
No Time Information
Viewing the Menus
1 With the power on, press the MENU button.
The main menu will appear at the bottom of the screen.
There are seven menu groups: Picture, Sound, Channel,
Setup, Input, Guide, and PIP.
2 Press the ▲ or ▼ button, then press the ENTER/OK
button to select an item you want in the menu. Press the
▲/▼/◄/►/ENTER/OK button to display, change, or use
the selected items.
3 Press the EXIT button to exit.
Using the TOOLS Button
Picture
Mode
Contrast : 100
Brightness : 45
Sharpness : 75
Colour : 55
Tint (G/R) : G50/R50
Colour Tone : Cool1
Backlight : 10
:
Dynamic
The Tools button allows you to display frequently used Menu
and Connection items with a Single button press.
1 Press the TOOLS button.
The TOOLS menu will appear.
2 Press the ▲/▼ button to select a menu, then press the
ENTER/OK button.
3 Press the ▲/▼/◄/►/ENTER/OK buttons to display, change,
or use the selected items.
For a more detailed description of each function, refer to the
corresponding page.
Device List, see page
Picture Setting, see page 24
Sound Setting, see page
imer, see page 34
Sleep T
Delete Favourite Channel, see page
Auto Store, see page
14
61
31
18
TOOLS
Device List
Picture Size : 16:9
Picture Mode : Dynamic
Sound Mode : Standard
Sleep Timer : Off
Delete from Favourite
Auto Store
Move
Enter
English - 10
English - 11
Viewing External Signal Sources
You can switch between viewing signals from connected
equipment, such as a VCR, DVD, Set-Top Box, and the TV
source (broadcast or cable).
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Input, then press the
ENTER/OK button.
3 Press the ENTER/OK button again to select Source List.
4 Press the ▲ or ▼ button to select the signal source, then
press the ENTER/OK button.
A
vailable signal sources: TV, A
Component1
HDMI3
You can select these options simply by pressing the SOURCE
➢
button on the remote control.
, Component
, USB
V1, AV2, S-Video,
2, PC, HDMI1, HDMI2/DVI,
Input
Source List
Edit Name
TV
AV1
AV2
S-Video
Component1
Component2
PC
Refresh Option
----
----
----
----
----
----
Editing Device Names
You can give a name to the external source.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Input, then press the
Input
ENTER/OK button.
3 Press the ▲ or ▼ button to select Edit Name, then press
the ENTER/OK button.
4 Press the ▲ or ▼ button to select the external source to
be edited, then press the ENTER/OK button.
5 Select the required device by pressing ▲ or ▼, then press
the ENTER/OK button.
A
vailable device names: VCR, DVD, D-VHS, Cable STB,
HD STB, Satellite STB, PVR STB, AV Receiver, DVD
Receiver, Game, Camcorder, DVD Combo, DVD HDD
Recorder, PC, Internet TV Recv., Interactive TV Recv.,
VOD STB, TV.
6 Press the EXIT button to exit.
When a PC with a resolution of 1920 x 1080@60Hz
➢
is connected to the HDMI IN 1 port, you should set
the HDMI1 mode to PC in the Source List of the
Input mode. If the HDMI1 mode is not PC, it works
depending on the TV setting.
AV1 :
AV2 :
S-Video :
Component1 :
Component2 :
PC :
HDMI1 :
AV1 :
AV2 :
S-Video :
Component1 :
Component2 :
PC :
HDMI1 :
Source List
Edit Name
Edit Name
----
----
----
----
----
----
----
Enter ReturnMove
Edit Name
----
----
----
VCR
----
DVD
----
D-VHS
----
Cable STB
----
HD STB
----
Enter ReturnMove
English - 12
English - 13
Setting the Guide
You can set the guide as your preference.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼button to select Guide. Press the
ENTER/OK button.
3 Select your required guide (Now & Next Guide or Full
Guide) by pressing the ▲ or ▼ button.
4 Press the ENTER/OK button.
5 Select a programme of your choice by pressing the
▲, ▼, ◄ or ► button.
6 Press the INFO button to display information about the
highlighted programme.
7 Press the red button to exchange Now & Next Guide or
Full Guide.
8 Press the EXIT button or blue button to exit.
Setting the Default Guide
You can preset the default guide style.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼button to select Guide. Press the
ENTER/OK button.
3 Press the ▲ or ▼ button to select Default Guide,
then press the ENTER/OK button.
4 Select Now/Next or Full Guide using the ▲ or ▼ button,
and press the ENTER/OK button.
5 Press the EXIT button to exit.
Guide
Guide
WISELINK
Full Guide
Now&Next Guide
Default Guide : Full Guide
Full Guide
77 Digital
Watch
DTV 77 Digital
NBC TODAY
AM
4:00 - AM 6:00
International news and weather. Including interviews with ne..
AM6:00-AM7:00 AM7:00-AM8:00
Today
NBC TODAY
7 Digital
NBC TODAY
7 HD Digital
NBC TODAY
7 Digital 1
NBC TODAY
7 Digital 2
NBC TODAY
7 Digital 3
NBC TODAY
7 Guide
INFO
Info
Now&Next
Full Guide
Now&Next Guide
Guide : Now&Next
Default
-2Hours
SUNRISE
SUNRISE
SUNRISE
SUNRISE
SUNRISE
SUNRISE
+2Hours
Now&Next
Full Guide
Exit
You can select these options by simply pressing the
➢
GUIDE button on the remote control.
When the TV is external device input mode, the Guide is
➢
inactive.
Checking the Digital-Signal Strength - Digital
Unlike analog channels, which can vary in reception quality
from “snowy” to clear, digital (HDTV) channels have either
perfect reception quality or you will not receive them at all.
Channel
So, unlike analog channels, you cannot fine tune a digital
channel.
You can, however, adjust your antenna to improve the
reception of available digital channels.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER/OK button.
3 Press the ▲ or ▼ button to select Signal Strength, then
press the ENTER/OK button.
4 If the signal strength meter indicates that the signal is
weak, physically adjust your antenna to increase the
signal strength.
Continue to adjust the antenna until you find the best
position with the strongest signal.
5 Press the EXIT button to exit.
Storing Channels Automatically
You can scan for the frequency ranges available to you
(availability depends on your country).
Automatically allocated programme numbers may not
correspond to actual or desired programme numbers.
However you can sort numbers manually and clear any
channels you do not wish to watch.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER/OK button.
3 Press the ▲ or ▼ button to select Auto Store, then press
the ENTER/OK button.
4 Press the ENTER/OK button again to start the search.
The search will end automatically.
To stop the search before it has finished, press the MENU or the ENTER/OK button.
➢
Channel
Manual Store
Fine Tune
Signal Strength
LNA : On
Signal Strength
OK
Enter Return
Channel List
Auto Store
Manual Store
Fine Tune
Signal Strength
LNA :
On
English - 14
English - 15
Storing Channels Manually
You can store television channels, including those
received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you
wish to identify.
1 Press the MENU button to display the menu.
Channel List
Auto Store
Channel
Manual Store
Fine Tune
Signal Strength
LNA :
On
2 Press the ▲ or ▼ button to select Channel, then press
the ENTER/OK button.
3 Press the ▲ or ▼ button to select Manual Store, then
press the ENTER/OK button.
4 Select the required option by pressing the ▲ or ▼ button,
then press the ENTER/OK button.
On digital mode, you can choose Digital Channel,
➢
on analog mode, you can choose Digital Channel
and Analog Channel.
5 When you are satisfied with your setting, press the
ENTER/OK button.
6 Press the EXIT button to exit.
Channel List
Auto Store
Channel
Manual Store : On
Fine Tune
Signal Strength
LNA :
Digital Channel
Analog Channel
On
Programme (Programme number to be assigned to a
channel)
−
Press the ▲ or ▼ button until you find the correct
number.
You can also select the channel number directly by
➢
pressing the numeric buttons (0~9).
Colour System: Auto/PAL
−
Press the ▲ or ▼ button to select the required colour
standard.
Channel
Manual Store
Frequency
4 3
6 3 45 00 K H z
Sound System: DK/BG/I
Press the ▲ or ▼ button to select the required sound
−
standard.
Channel (When you know the number of the channel to
be stored)
−
Press the ▲ or ▼ button to select
C (Air channel) or S
(Cable channel).
− Press the ► button, then press the ▲ or ▼ button to
select the required number.
You can also select the channel number directly by
➢
pressing the numeric buttons (0~9).
If there is abnormal sound or no sound, reselect the
➢
sound standard required.
Search (When you do not know the channel numbers)
−
Press the ▲ or ▼ button to start the search.
Adjust
Programme
1
Channel
C 2
Adjust
Start
Move
Manual Store
Colour System
A u to
Search
6 2 M Hz
Move
− The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
−
Set to
Channel mode
☛
OK by pressing the ENTER/OK button.
P (Programme mode): When completing tuning, the broadcasting stations in your area have
been assigned to position numbers from P00 to P99. You can select a channel by entering the
position number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each
cable channel in this mode.
Bandwidth
7 M Hz
ReturnEnter
Sound System
B G
Store
?
ReturnEnter
Managing Channels
Using this menu, you can Add/Delete or set Favourite
channels and use the program guide for digital broadcasts.
Viewing All Channels
Show all currently available channels.
To use the Channel List function, first run Auto Program.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER/OK button.
3 Press the ▲ or ▼ button to select Channel List, then
press the ENTER/OK button.
4 Press the ◄ button to select Added Channels.
5 Press the ▲ or ▼ button to select All Channels, then
press the ENTER/OK button.
Shows all currently available channels.
6 Press the ▲ or ▼ button to select a channel to view, then
press the ENTER/OK button.
You can watch the selected channel.
You can press Number buttons on Remote control for
➢
direct channel access, press the same Number button
again to switch between digital channel and ATV channel.
You can select these options simply by pressing the CH LIST
➢
button on the remote control.
Channel
Added Channels
All Channels
Channel List
Auto Store
Manual Store
Fine Tune
Signal Strength
LNA :
1 ♥ 7HD Digital
2 ♥ 7Digital 1
3 ♥ 7Digital 2
4 ♥ 7Digital 3
ATV0 C1
ATV1 C2
ATV2 C3
ATV3 C4
ATV4 C5
Zoom
Select
1 ♥ 7HD Digital
2 ♥ 7Digital 1
3 ♥ 7Digital 2
4 ♥ 7Digital 3
ATV0 C1
ATV1 C2
ATV2 C3
ATV3 C4
ATV4 C5
Zoom
Select
On
Option
Option
Using the Colour buttons on the Remote with the Channel List
Green (Zoom): Enlarges or shrinks a channel number.
Yellow (Select): Selects multiple channel lists.
Blue (Option): Displays the Add (or Delete), Add Favourite (or Delete Favourite), Timer Viewing, and
Channel Name Edit menus.
A gray-Coloured channel refers to a deleted channel. The Add menu only appears for deleted
➢
channels.
If you select multiple channel include “favourite channels”,
➢
“delete channel etc. channels” and other channels, you
can choose “Add to Favourite or Delete from Favourite or
Add or Deselect All” etc.
All Channels
1 ♥ 7HD Digital
2 ♥ 7Digital 1
3 ♥ 7Digital 2
4 ♥ 7Digital 3
ATV0 C1
ATV1 C2
ATV2 C3
ATV3 C4
ATV4 C5
Zoom
Select
Add
Delete
Add to Favourite
Delete from Favourite
Deselect All
Option
Continued...
English - 16
English - 17
Adding and Erasing Channels
You can add or delete a channel to display the channels you want.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER/OK button.
3 Press the ▲ or ▼ button to select Channel List, then
press the ENTER/OK button.
4 Press the ◄ button to select Added Channels.
5 Press the ▲ or ▼ button to select All Channels, then
press the ENTER/OK button.
Shows all currently available channels.
Channel
Channel List
Auto Store
Manual Store
Fine Tune
Signal Strength
LNA :
6 Press the ▲ or ▼ button to select a channel to add, then
press the blue button.
7 Press the ENTER/OK button to select Add.
All added channels will be shown on Added
➢
Channels menu.
8 Press the ▲ or ▼ button to select a channel to delete,
then press the blue button.
Press the ENTER/OK button to select Delete.
9 Press the EXIT button to exit.
You can also delete a channel in the Added Channels
➢
menu in the same manner.
Added Channels
All Channels
All Channels
1 ♥ 7HD Digital
2 ♥ 7Digital 1
3 ♥ 7Digital 2
4 ♥ 7Digital 3
ATV0 C1
ATV1 C2
ATV2 C3
ATV3 C4
ATV4 C5
Zoom
1 ♥ 7HD Digital
2 ♥ 7Digital 1
3 ♥ 7Digital 2
4 ♥ 7Digital 3
ATV0 C1
ATV1 C2
ATV2 C3
ATV3 C4
ATV4 C5
Zoom
1 ♥ 7HD Digital
2 ♥ 7Digital 1
3 ♥ 7Digital 2
4 ♥ 7Digital 3
ATV0 C1
ATV1 C2
ATV2 C3
ATV3 C4
ATV4 C5
Zoom
Select
Select
Select
Option
Option
Delete
Delete from Favourite
Timer Viewing
Channel Name Edit
Option
On
You can select these options simply by pressing the CH LIST
➢
button on the remote control.
Continued...
Setting Your Favourite Channels
You can set channels you watch frequently as favourites.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press
the ENTER/OK button.
3 Press the ▲ or ▼ button to select Channel List, then
press the ENTER/OK button.
4 Press the ◄ button to select Added Channels.
5 Press the ▲ or ▼ button to select Favourite, then
press the ENTER/OK button. You can view all favorite
channels.
6 Press the ▲ or ▼ button to select Added Channels,
press the ENTER/OK button
7 Press the ▲ or ▼ button to select a channel as a
favourite channel, then press the blue button.
Added Channels
8 Press the ▲ or ▼ button to select Add to Favourite,
then press the ENTER/OK button.
The “♥” symbol will be displayed and the channel will be
set as a favourite.
9 To cancel your favourite channel selection, press the blue
button when a favourite channel is selected. Press the
▲ or ▼ button to select Delete from Favourite, then
press the ENTER/OK button. The channel is deleted from
Favourites and the “♥” mark also disappears.
0 Press the EXIT button to exit.
1
You can also Add or Delete a channel from Favourites in
➢
the All Channels menu in the same manner.
Only memorized channels can be set as favourite
➢
channels.
All favourite channels will be shown on Favourite menu.
➢
Added Channels
Channel
Channel List
Auto Store
Manual Store
Fine Tune
Signal Strength
LNA :
1 ♥ 7HD Digital
2 ♥ 7Digital 1
3 ♥ 7Digital 2
4 ♥ 7Digital 3
ATV0 C1
ATV1 C2
ATV2 C3
ATV3 C4
ATV4 C5
Zoom
1 ♥ 7HD Digital
2 ♥ 7Digital 1
3 ♥ 7Digital 2
4 ♥ 7Digital 3
ATV0 C1
ATV1 C2
ATV2 C3
ATV3 C4
ATV4 C5
Zoom
Select
Select
On
Option
Delete
Delete from Favourite
Timer Viewing
Channel Name Edit
Option
You can select these options simply by pressing the
➢
CH LIST button on the remote control.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲/▼ button to select Add to Favourite or
Delete from Favourite, then press the ENTER/OK
button. The current channel is added to or deleted from
Favourites.
To select the favourite channels you have set up, press the
➢
FAV.CH button on the remote control.
English - 18
TOOLS
Device List
Picture Size : 16:9
Picture Mode : Dynamic
Sound Mode : Standard
Sleep Timer : Off
Delete from Favourite
Auto Store
Move
Continued...
Enter
English - 19
Reserving a Program (Time Viewing)
If you reserve a program you want to watch, the channel is automatically switched to the reserved
channel in the Channel List even when you are watching another channel.
T
o reserve a program set the current time first. See pages 33~34. Reserved channels can only be
set if they are in the Channel List (See page 16).
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press
the ENTER/OK button.
3 Press the ▲ or ▼ button to select Channel List, then
press the ENTER/OK button.
4 Press the ▲ or ▼ button to select a channel, then press
the Blue (Options) button.
5 Press the ▲ or ▼ button to select Timer Viewing, then
press the ENTER/OK button.
Channel
Channel List
Auto Store
Manual Store
Fine Tune
Signal Strength
LNA :
On
The Reserve a Program (Timer Viewing) screen appears.
6 Press the ▲/▼/◄/► buttons to reserve a program and
then press the ENTER/OK button.
Reserving a program has been completed.
7 Press the EXIT button to exit.
You can also reserve a program in the All Channels or
➢
Favourite menus using the same procedures.
For information on how to confirm a viewing reservation,
➢
refer to page 20.
Added Channels
1 ♥ 7HD Digital
2 ♥ 7Digital 1
3 ♥ 7Digital 2
4 ♥ 7Digital 3
ATV0 C1
ATV1 C2
ATV2 C3
ATV3 C4
ATV4 C5
Zoom
Select
Antenna Channel Repeat
DTV 2 once
Date
2007 - 01 - 10
Move Adjust
Delete
Delete from Favourite
Timer Viewing
Channel Name Edit
Option
Timer Viewing
Start Time
10:09 am
Enter Return
You can select these options simply by pressing the CH
➢
LIST button on the remote control.
Digital Program Guide and Viewing Reservation
When a digital channel is selected, and you press the
► button, the Program Guide for the channel appears.
You can reserve a program according to the procedures
described above.
: A program currently being broadcast.
: A reserved program
Added Channels
1 ♥ 7HD Digital 2007/2/3
2 ♥ 7Digital 1 1:30 am
3 ♥ 7Digital 2 2:27 am
4 ♥ 7Digital 3 2:35 am
ATV0 C1 3:21 am
ATV1 C2 4:33 am
ATV2 C3 6:00 am
ATV3 C4 6:36 am
ATV4 C5
Zoom
Option Watch
Continued...
Confirming a Viewing Reservation
You can view, modify or delete a reservation.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER/OK button.
3 Press the ▲ or ▼ button to select Channel List, then
press the ENTER/OK button.
4 Press the ◄ button to select Added Channels.
5 Press the ▲ or ▼ button to select Programed, then press
the ENTER/OK button.
You can view reservations.
Channel
Channel List
Auto Store
Manual Store
Fine Tune
Signal Strength
LNA :
Added Channels
1 ♥ 7HD Digital
2 ♥ 7Digital 1
3 ♥ 7Digital 2
4 ♥ 7Digital 3
ATV0 C1
ATV1 C2
ATV2 C3
ATV3 C4
ATV4 C5
Zoom
Programed
2007/2/3
3:15 am 6-1 No Program Name
4:15 am 6-1 No Program Name
2007/2/4
2:14 am 6-1 No Program Name
2007/2/5
2:15 am 6-1 No Program Name
Zoom
Select
Select
Modifying a viewing reservation
6 To select a reservation item to be modified, press the
▲ or ▼ button and then press the blue button.
7 Press the ENTER/OK button to select Change Info.
8 Press the ▲/▼/◄/► buttons to change a reservation
setting and then press the ENTER/OK button.
The reservation modification is applied.
Cancelling a reservation
6 To select a reservation item to be cancelled, press the
Programed
2007/2/3
3:15 am 6-1 No Program Name
4:15 am 6-1 No Program Name
2007/2/4
2:14 am 6-1 No Program Name
2007/2/5
2:15 am 6-1 No Program Name
Zoom
Select
▲ or ▼ button, and then press the blue button.
7 Press the ▲ or ▼ button to select Cancel schedules, then press the ENTER/OK button.
8 Press the ◄ or ► button to select OK, then press the ENTER/OK button.
The viewing reservation has been cancelled.
9 Press the EXIT button to exit.
Programed Menu
Change Info: Select to change a viewing reservation.
Cancel schedules: Select to cancel a viewing reservation.
Information: Select to view a viewing reservation.
You can select these options simply by pressing the CH LIST
➢
button on the remote control.
On
Option
Option Information
Change Info
Cancel schedules
Information
Option Information
English - 20
Continued...
English - 21
Labeling Channels - Analog
Channels can labeled so that their call letters appear whenever the channel is selected.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press
the ENTER/OK button.
3 Press the ▲ or ▼ button to select Channel List, then
press the ENTER/OK button.
4 Press the ▲ or ▼ button to select the channel to be
assigned a new name, then press the blue button.
5 Press the ▲ or ▼ button to select Channel Name Edit,
then press the ENTER/OK button.
Channel
Channel List
Auto Store
Manual Store
Fine Tune
Signal Strength
LNA :
6 Press the ▲/▼/◄/► button to select a letter, then press
the ENTER/OK button.
Numeric buttons: You can enter numbers.
Red button: You can switch between English and
Characters.
Green button: You can delete an already entered
character.
Yellow button: You can enter a blank space.
Blue button: Press this button to finish renaming a
channel.
7 When you have finished, press the blue button to assign
the new name.
8 Press the EXIT button to exit.
The names of digital broadcasting channels are
➢
automatically assigned and thus cannot be assigned by
users.
Added Channels
Added Channels
3 ♥ 7Digital 2
4 ♥ 7Digital 3
ATV0 C1
ATV1 C2
ATV2 C3
ATV3 C4
ATV4 C5
ATV5 C6
ATV6 C7
Zoom
Select
3 ♥ 7Digital 2
4 ♥ 7Digital 3
ATV0 C1
ATV1 C2
ATV2 C3
ATV3 C4
ATV4 C5
ATV5 C6
ATV6 C7
Zoom
Select
Option
Delete
Add to Favourite
Timer Viewing
Channel Name Edit
Option
On
6
A
V
Number
Character
Delete
Blank
Done
Enter ReturnMove
Channel Name Edit
_
Loading...