Samsung LA40A680M1R, LA52A680M1R, LA46A680M1R User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

AUSTRALIA 1300 362 603 www.samsung.com CHINA 800-810-5858

HONG KONG 3698-4698 www.samsung.com/hk INDIA 3030 8282

INDONESIA 0800-112-8888 www.samsung.com JAPAN 0120-327-527 www.samsung.com/jp MALAYSIA 1800-88-9999 www.samsung.com/my NEW ZEALAND 0800SAMSUNG(726-7864) www.samsung.com/nz PHILIPPINES 1800-10-SAMSUNG(726-7864) www.samsung.com/ph SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com THAILAND 1800-29-3232

TAIWAN 0800-329-999 www.samsung.com/tw VIETNAM 1 800 588 889 www.samsung.com SOUTH AFRICA 0860-SAMSUNG(726-7864 ) www.samsung.com U.A.E 800-SAMSUNG (726-7864)

Customer Care Centre

010-6475 1880

1800 110011

02-689-3232

8000-4726

Web Site

www.samsung.com

LCD TV

user manual

BN68-01705A-00

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/global/register

Model Serial No.

Without producing harmful VOC (Volatile Organic Compounds), Samsung’s Eco-friendly “Crystal Design” expresses color gradation thanks to our dual injection technology.

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also

• known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

• To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of

• the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

Contents

CONNECTING AND PREPARING YOUR TV

List of Parts ........................................................ 2



Installing the Wall Mount Kit ............................... 2



Viewing the Control Panel .................................. 3



Viewing the Connection Panel ........................... 4



Viewing the Remote Control ............................... 6



Installing Batteries in the Remote Control .......... 7



Switching On and Off ......................................... 7



Placing Your Television in Standby Mode........... 7



Viewing the Menus ............................................. 8



Using the TOOLS Button .................................... 8



Using the Remote Control Backlight Buttons ..... 8



Plug & Play ......................................................... 9



SETTING THE CHANNELS

Storing Channels Automatically ....................... 10



Storing Channels Manually ...............................11



Adding / Locking Channels .............................. 12



Sorting the Stored Channels ............................ 13



Assigning Channels Names ............................. 13



Fine Tuning Channel Reception ....................... 14



SETTING THE PICTURE

Changing the Picture Standard ........................ 15



Adjusting the Custom Picture ........................... 16



Conguring Detailed Settings on the Picture ... 16



Resetting the Picture Settings to the Factory



Defaults ............................................................ 17

Conguring Picture Option ............................... 18



Viewing the Picture In Picture (PIP) ................. 20



SETTING THE SOUND

Sound Features ................................................ 21



Selecting the Sound Mode ............................... 22



Connecting Headphones (Sold separately) ..... 22



SETTING THE TIME

Setting and Displaying the Current Time .......... 23



Setting the Sleep Timer .................................... 23



Switching the Television On and Off



Automatically .................................................... 24

FUNCTION DESCRIPTION

Choosing Your Language ................................. 24



Melody / Entertainment / Energy Saving .......... 25



Selecting the Source ........................................ 27



Editing the Input Source Names ...................... 27



SETTING THE PC

Setting up Your PC Software



(Based on Windows XP) .................................. 28

Display Modes .................................................. 28



Setting up the TV with your PC ........................ 29



WISELINK

Using the WISELINK Function ......................... 30



Using the WISELINK Menu .............................. 31



Using the PHOTO (JPEG) List ......................... 32



Using the MP3 List ........................................... 35



Using the Setup Menu ...................................... 36



ABOUT ANYNET

What is Anynet+? ............................................ 37



Connecting Anynet+ Devices ........................... 37



Setting Up Anynet+ .......................................... 38



Scanning and Switching between Anynet+



Devices ............................................................ 39

Recording ......................................................... 41



Listening through a Receiver ........................... 41



Check Points before Requesting Service ......... 42



RECOMMENDATIONS FOR USE

Teletext Feature ............................................... 43



Auto Wall-Mount (Sold separately) ................... 45



Using the Anti-Theft Kensington Lock



(depending on the model) ................................ 46

Securing the TV to the Wall .............................. 47



Troubleshooting: Before Contacting Service



Personnel ......................................................... 48

Technical and Environmental Specications .... 49



Symbol Press Note One-Touch

English - 1

Button

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

Remote Control &

Batteries

(AAA x 2)

Owner’s Instructions

•

Warranty card / Safety Guide / Registration Cards (Not available in all locations)

➣

Power Cord Cover-Bottom Cleaning Cloth

Warranty card

•

Safety Guide

•

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

Remove the stand and cover the bottom hole with a

➣

cap and fasten with two screws.

Registration Cards

•

English - 2

Viewing the Control Panel

87654311 2

The product colour and shape may vary depending on the model.

➣

Front Panel buttons Touch each button to operate.

Speakers

Remote Control Sensor

Aim the remote control towards this spot on the TV.

The location of the Remote Control Sensor

➣

lock may be different depending on its model.

SOURCE

Toggles between all the available input sources (TV, AV1, AV2, S-Video, Component1, Component2, PC, HDMI1, HDMI2, HDMI3, HDMI4). In the on-screen menu, use this button

as you use the control.

Press to see an on-screen menu of your TV’s features.

ENTER

button on the remote

English - 3

- VOL +

Press to decrease or increase the volume. In the on-screen menu, use the - VOL +

buttons as you use the ◄ and ► buttons on

the remote control.

Press to change channels. In the on-screen menu, use the buttons as you use the ▼ and ▲ buttons on the remote control. (Without the Remote Control, you can turn on the TV by using the Channel buttons.)

Power Indicator

Blinks and turns off when the power is on and lights up in stand-by mode.

(Power)

Press to turn the TV on and off.

Viewing the Connection Panel

2 3 4 5

[Side Panel Jacks]

The product colour and shape may vary depending on the model.

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

➣

When connecting an external device, match the colour of the connection terminal to the cable.

➣

1 PC IN [PC] / [AUDIO]

Connect to the video and audio output jack on your PC.

2 Connecting External A/V Devices (AV IN 1)

Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to

corresponding audio out connectors on the A/V device.

3 HDMI IN 1, HDMI IN 2, HDMI IN 3, HDMI IN 4

Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)

No additional Audio connection is needed for an HDMI to HDMI connection.

When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

What is HDMI?

➣

“High Denition Multimedia interface” allows the transmission of high denition digital video data

and multiple channels of digital audio. The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate

cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

The TV may not output sound and pictures may be displayed with abnormal colour when DVD

➣

players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite

receiver to conrm the HDMI version, then request a rmware update. HDMI cables that are not

1.3 may cause annoying icker or no screen display.

Power Input

English - 4

DVI IN(HDMI2) [R-AUDIO-L]

DVI audio outputs for external devices.

Supported modes for HDMI/DVI and Component

➣

HDMI/DVI 50Hz X X X O O O O HDMI/DVI 60Hz X O X X O O O

Component O O O O O O O

480i 480p 576i 576p 720p 1080i 1080p

4 ANT IN

To view television channels correctly, a signal must be received by the set from one of the following sources:

An outdoor aerial / A cable television network / A satellite network

5 SERVICE

Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your remote control.

6 WISELINK

Connect a USB mass storage device to view photo les (JPEG) and play audio les (MP3)

7 S-VIDEO or VIDEO / R-AUDIO-L

Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or

Camcorder. Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out

connectors on the A/V device.

8 HEADPHONES JACK

Headphone may be connected to the headphone output on your set. While the head phone is

connected, the sound from the built-in speakers will be disabled.

9 AUDIO OUT [R-AUDIO-L]

Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to

corresponding audio in connectors on the Amplier or DVD Home Theatre.

0 COMPONENT IN 1,2

Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your

set and the other ends to corresponding component video out connectors on the DVD. If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD

and connect the DVD to component connector ("PR", "PB", "Y") on your set. The PR, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y

or Y, Cb and Cr. Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of your set and the other ends to

corresponding audio out connectors on the DVD.

! Kensington Lock (depending on the model)

The Kensington Lock (optional) is a device used to physically x the system when used in a public

place. If you want to use a locking device, contact the dealer where you purchased the TV.

The location of the kensington lock may be different depending on its model.

English - 5

Viewing the Remote Control

1 Television Standby button 2 Selects the TV mode

directly

3 Number buttons for direct

channel access

4 One/Two-digit channel

selection

5 + : Volume increase – :

Volume decrease

6 Available source selection 7 Displays "Channel List"

on the screen.

8 Use to quickly select

frequently used functions.

9 Use to see information on

the current broadcast

0 Colour buttons :

Use these buttons in the Channel list and WISELINK, etc.

@ Press to select the optional

display and sound modes for sports, cinema and games.

# Use these buttons in

the DMA, WISELINK and Anynet+. ( : This remote can be used to control recording on Samsung recorders with the Anynet+ feature)

Press to backlight the buttons on the remote. This function is convenient for using at night or when the room is dark. (Using the remote control with the ON/OFF light button set to On will reduce the battery usage time.) (see page 8)

Previous channel

^ Temporary sound switch-

off

& P : Next channel P : Previous channel

* Displays the main on-

screen menu

( This function enables you

to view and play photo and music files from an external device.

) Returns to the previous

a Control the cursor in the

b Exit the on-screen menu c SRS TS XT selection d Picture size selection e Selects the HDMI mode

directly.

f Picture effect selection

Teletext Functions

Exit from the teletext

display

6 Teletext mode selection (LIST/FLOF)

Teletext store

Teletext size selection

Teletext reveal

Fastext topic selection

! Alternately select Teletext, Double, or Mix.

Teletext sub page

P : Teletext next page

P :

* Teletext index ) b

Teletext previous page

Teletext hold Teletext cancel

The performance of the remote control may be affected by bright light.

➣

English - 6

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the gure.

2. Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the

➣

diagram inside the compartment.

3. Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be

➣

using the remote control for a long time. Using the remote control with the ON/OFF light button set to On will

➣

reduce the battery usage time.

If the remote control doesn’t work, check the following:

➣

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special uorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up

➣

2. Press the P button You also can press the POWERP button or the TV button on the remote control to turn the TV

➣

on. The programme that you were watching last is reselected automatically.

➣

3. Press the numeric button (0~9) or channel up/down (

button

on your set.

When you switch the set on for the very rst time, you will be asked to choose language in which the

➣

menus are to be displayed.

4. To switch your set off, press the POWERP button again.

on your set.

/ ) button on the remote control or

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWERP button on the remote control.

The screen is turned off and a red standby indicator appears on your set.

➣

2. To switch your set back on, simply press the POWER

up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for

➣

example). It is best to unplug the set from the mains and aerial.

English - 7

P, numeric buttons (0~9), TV button or channel

Viewing the Menus

1. With the power on, press the MENU button.

The main menu appears on the screen. The menu’ s left side has

icons: Picture, Sound, Channel, Setup, Input.

2. Press the ▲ or ▼ button to select one of the icons.

Then press the

3. Press the EXIT The on-screen menus disappear from the screen after about

➣

ENTER

button to access the icon’s sub-menu.

button to exit.

one minute.

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu change depending on which external input mode you are viewing.

1. Press the TOOLS button.

The “Tools” menu will appear.

2. Press the ▲ or ▼ button to select a menu.

3. Press the ▲/▼/◄/►/

use the selected items. For a more detailed description of each function, refer to the corresponding page.

Anynet+ (HDMI-CEC), see page 38

♦

Picture Mode, see page 15

♦

Sound Mode, see page 21

♦

Sleep Timer, see page 23

♦

SRS TS XT, see page 21

♦

Energy Saving, see page 26

♦

Dual l-ll, see page 22

♦

PIP, see page 20

♦

Auto Adjustment, see page 29

♦

ENTER

buttons to display, change, or

Mode : Standard Backlight 7 Contrast 95 Brightness Sharpness Colour 50

Tint G50 R50

Detailed Settings sMore

Move Enter Return

Anynet+ (HDMI-CEC) Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono

Move Enter Exit

Picture

Tools



45 10



English - 8

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.

1. Press the POWER button on the remote control.

The message "Start Plug & Play" is displayed with "OK" selected.

2. Select the appropriate language by pressing the

Press the

3. Press the

then the

➣

➣ ➣

4. The message "Check antenna input." is displayed with "OK" selected.

Press the

➣

5. Select the appropriate area by pressing the

Press the

The "Auto Store" menu is displayed with the "Start" selected. Press the

➣ ➣ ➣

7. Press the

Select the "Month", "Day" , "Year", "Hour", "Minute", or "am/pm" by pressing the ◄ or ► button. Set the "Month", "Day" , "Year", "Hour", "Minute", or "am/pm" by pressing the ▲ or ▼ button.

➣

8. Press the

When you have nished, press the

➣

♦ ♦ ♦ ♦

ENTER

◄

ENTER

We recommend setting the TV to "Home Use" mode for the best picture in your home environment. "Store Demo" mode is only intended for use in retail environments. If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

ENTER

Please check that the antenna cable is connected correctly.

ENTER

The channel search will start and end automatically. Press the After all the available channels are stored, the "Clock Set" menu appears.

ENTER

You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons on the remote control.

ENTER

Even if the several seconds.

Language: Select your language.

Select your area.

Area: Auto Store: Clock Set: Sets the current time for the TV clock.

button to conrm your choice.

or ► button to select “Store Demo” or “Home Use”,

button.

button to conrm your choice.

ENTER

Automatically scans for and stores channels available in the local area.

button at any time to interrupt the memorization process.

button.

button to conrm your setting. The message “Enjoy your viewing” is displayed.

ENTER

button is not pressed, the message will automatically disappear after

▲

or ▼ button.

button.

or ▼ button.

ENTER

Plug & Play

Start Plug & Play.

Enter

button.

English - 9

If you want to reset this feature...

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER

Press the

button.

ENTER

button again, to select "Plug & Play".

For further details on setting up options, refer to the page 9.

The “Plug & Play” feature is only available in the TV mode.

➣

Plug & Play Language : English Time

Auto Wall-Mount 

Melody : Off Entertainment : Off Energy Saving : Off

PIP

Move Enter Return

Start Plug & Play.

Enter Return

Setup

Plug & Play

Enter Return

  



Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your area). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER

2. Press the

3. Select the appropriate area by pressing the

Press the

4. Press the

ENTER

5. Press the

➣ ➣

button.

ENTER

button to select "Area".

▲ or ▼ button.

ENTER

button to conrm your choice.

▲ or ▼ button to select "Auto Store", then press the

button.

ENTER

button.

The TV will begin memorizing all of the available channels. Press the

ENTER

button at any time to interrupt the memorization process and return to the

Area : Auto Store  Manual Store Channel Manager  Sort  Name  Fine Tune

Move Enter Return

"Channel" menu.

6. After all the available channels are stored, the "Sort" menu appears. (refer to page 13)

Channel

Asia/W.Europe 



English - 10

Storing Channels Manually

You can store television channels, including those received via cable networks. When storing channels manually, you can choose:

♦ Whether or not to store each of the channels found. ♦ The programme number of each stored channel which you wish

to identify.

Area : Auto Store  Manual Store Channel Manager  Sort Name  Fine Tune 

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER

button.

2. Press the ▲ or ▼ button to select "Manual Store", then press

the

ENTER

button.

3. Select the required option by pressing the ▲ or ▼ button, then

press the

4. When you are satised with your setting, press the

ENTER

5. Press the EXIT

Programme (Programme number to be assigned to a channel)

♦

➣

Colour System: Auto/PAL/SECAM/NTSC4.43/NTSC3.58

♦

Sound System: BG/DK/I/M

Channel (When you know the number of the channel to be stored)

♦

➣ ➣

Search (When you do not know the channel numbers)

♦

ENTER

button.

button to exit.

Press the ▲ or ▼ button until you nd the correct number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

Press the ▲ or ▼ button to select the required colour standard.

Press the ▲ or ▼ button to select the required sound standard.

Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). Press the ► button, then press the ▲ or ▼ button to select the required number.

You can also select the channel number directly by pressing the numeric buttons (0~9). If there is abnormal sound or no sound, re-select the sound standard required.

Press the ▲ or ▼ button to start the search.

The tuner scans the frequency range until the rst channel or the channel that you selected is

Move Enter Return

Programme : P 2 Colour System : Auto Sound System : BG  Channel : C 3 Search : 77 MHz Store : ?

Move Enter Return

received on the screen.

Store (When you store the channel and associated programme number)

♦

Set to "OK" by pressing the

Channel mode

➣

P (Programme mode): When completing tuning, the broadcasting stations in your area have been

ENTER

button.

assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.

C (Air channel mode): You can select a channel by entering the assigned number to each air

broadcasting station in this mode.

S (Cable channel mode): You can select a channel by entering the assigned number for each cable

channel in this mode.

Channel

Asia/W.Europe 

Manual Store



English - 11

Adding / Locking Channels

Using the Channel Manager, you can conveniently lock or add channels.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER

2. Press the

press the

♦ Adding channels

Using the Channel List, you can add channels.

3. Select Channel List by pressing the

4. Move to the (

button, select a channel to be added, and press the

ENTER

➣

button.

▲ or ▼ button to select "Channel Manager", then

ENTER

button.

ENTER

button.

) eld by pressing the ▲, ▼, ◄ or ►

button to add the channel.

If you press the

ENTER

button again, the ( ) symbol next to the channel disappears and the channel is not added. “ ” is active when "Child Lock" is selected to "On".

Area : Auto Store  Manual Store  Channel Manager  Sort Name  Fine Tune

Move Enter Return

Channel List Child Lock : Off

Move Enter Return

Channel

Channel Manager



Asia/W.Europe 



♦ Locking channels

This feature allows you to prevent unauthorized users, such as

children, from watching unsuitable programmes by muting out video and audio.

5. Press the ▲ or ▼ button to select "Child Lock", then press the

ENTER

button.

6. Select "On" by pressing the ▲ or ▼ button, then press the

ENTER

button.

7. Press the ▲ or ▼ button to select "Channel List", then press

the

ENTER

8. Move to the (

select a channel to be locked, and press the

button.

) eld by pressing the ▲, ▼, ◄ or ► button,

ENTER

button.

If you press the

➣

ENTER

button again, the ( ) symbol next to the channel disappears and the channel lock is cancelled. A blue screen is displayed when "Child Lock" is activated.

➣

Channel List

P 1 C3

Prog.

0 C--

1 C3

2 BBC 1

3 C74

4 C75

5 C76

6 S3

7 S4

8 S6

9 S7

Add Lock

Move Enter

Page Return

9. Press the EXIT button to exit.

Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on " " to be active

➣

or inactive.

You can select these options by simply pressing the CH LIST

button on the remote control.

1 / 10

English - 12

Sorting the Stored Channels

This operation allows you to change the programme numbers of the stored channels.

This operation may be necessary after using the auto store.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER

button.

2. Press the ▲ or ▼ button to select "Sort", then press the

ENTER

3. Select the channel number that you wish to change by

button.

pressing the ▲ or ▼ button. Press the

➣

ENTER

button. The selected channel number and name are moved to right side.

4. Select the number of the programme to which the channel is to

be moved by pressing the ▲ or ▼ button.

5. Press the

ENTER

button. The channel is moved to its new

position and all other channels are shifted accordingly.

6. Repeat steps

7. Press the EXIT

3 to 5 for another channel to be sorted.

button to exit.

Area : Auto Store  Manual Store  Channel Manager Sort  Name Fine Tune 

Move Enter Return

Prog. Ch. Name  0 C--

1 C23

2 C16 3 C3 4 S1 s

Move Enter Return

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed,

allowing you to assign new names.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER

2. Press the

ENTER

3. If necessary, select the channel to be assigned to a new

name by pressing the ▲ or ▼ button. Press the

button.

▲ or ▼ button to select "Name", then press the

button.

ENTER

button

The selection bar is displayed around the name box.

➣

To... Then...

Select a letter, number or symbol Press the ▲ or ▼ button

Move on the next letter Press the ► button

Move back the previous letter Press the ◄ button

Conrm the name

The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special

➣

Press the

ENTER

button

characters (+, -, *, /, space)

5. Repeat steps

6. Press the EXIT

3 to 4 for each channel to be assigned to a new name.

button to exit.

Area : Auto Store Manual Store  Channel Manager  Sort Name  Fine Tune

Move Enter Return

Prog. Ch. Name  0 C-- ----1 C23 ----2 C16 ----3 C3 ----4 S1 ---- s

Move Enter Return

Channel

Asia/W.Europe 

Sort

Channel

Asia/W.Europe 

Name



English - 13

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.

1. Use the number buttons to directly select the channel that

you want to ne tune.

2. Press the Press the

ENTER

3. Press the

the

4. Press the Press the

5. Press the EXIT Fine tuned channels that have been saved are marked with

➣

an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red.

To reset the ne-tuning, select "Reset" by pressing the ▲ or ▼

➣

button and then press the

MENU button to display the menu. ▲ or ▼ button to select "Channel", then press the

button.

▲ or ▼ button to select "Fine Tune", then press

ENTER

button.

◄ or ► button to adjust the ne tuning.

ENTER

button.

button to exit.

ENTER

button.

Fine Tune

Reset

Channel

Asia/W.Europe 

Area : Auto Store  Manual Store  Channel Manager Sort  Name Fine Tune 

Move Enter Return

P 1

Adjust Save Return



English - 14

+ 36 hidden pages