Samsung LA52F81BDX, LA46F81BDX, LA40F81BD, LA40F81BDX, LA46F81BD User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country	Customer Care Centre	Web Site
AUSTRALIA	1300 362 603	www.samsung.com/au
CHINA	800-810-5858 , 0106475 1880	www.samsung.com.cn
HONG KONG	3698 - 4698	www.samsung.com/hk
INDIA	3030 8282	www.samsung.com/in
	1800 1100 11
INDONESIA	0800-112-8888	www.samsung.com/id
JAPAN	0120-327-527	www.samsung.com/jp
MALAYSIA	1800-88-9999	www.samsung.com/my
PHILIPPINES	1800-10-SAMSUNG (7267864)	www.samsung.com/ph
SINGAPORE	1800-SAMSUNG (7267864)	www.samsung.com/sg
THAILAND	1800-29-3232	www.samsung.com/th
	02-689-3232
TAIWAN	0800-329-999	www.samsung.com/tw
VIETNAM	1 800 588 889	www.samsung.vn
SOUTH AFRICA	0860 7267864 (SAMSUNG)	www.samsung.com/za
U.A.E	800SAMSUNG (7267864)	www.samsung.com/mea
	8000-4726

LCD TV

LA40F81BD

LA46F81BD

LA52F81BD

Owner’s Instructions

Before operating the unit, please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

PC DISPLAY

PICTURE IN PICTURE (PIP)

TELETEXT

		Register your product at www.samsung.com/global/register
	BN68-01324A-02	Record your Model and Serial number here for future reference.
		▪ Model _______________ ▪ Serial No. _______________

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

•Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn".

To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

•Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen.

Playing a DVD or a game console may cause a similar effect to the screen.

Damages caused by the above effect are not covered by the Warranty.

•Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

©2007 Samsung Electronics Co., Ltd. All rights reserved.

Contents

General Information
 User Instructions.............................................	2
 List of checking Parts ......................................	4
 Installing the Wall Mount Kit ...........................	4
 Viewing the Control Panel .............................	5
 Viewing the Connection Panel........................	6
 Viewing the Remote Control ...........................	8
 Installing Batteries in the Remote control..........	9
Operation
 Switching On and Off....................................	. 9
 Placing Your Television in Standby Mode........	9
 Plug & Play Feature......................................	10
 Viewing the Display.......................................	11
 Viewing the Menus........................................	12
 Using the TOOLS Button ..............................	12
 Viewing External Signal Sources..................	13
 Editing Device Names...................................	14
Using the DTV Feature
 Setting the Guide..........................................	15
 Setting the Default Guide..............................	15
 Checking the Digital-Signal Strength - Digital...	16

Function Description
 Setting the Time............................................	35

Menu Transparency / Energy Saving / HDMI Black Level / Film Mode / Light Effect / Blue Screen /

Melody / Function Help..................................	37
 Activating the Child Lock...............................	38
 Setting the Subtitle .......................................	39
 Using the Game Mode..................................	40
 Setting up the Parental Lock.........................	41
 Wallmount adjustment
(Sold separately)...........................................	43
 Upgrading the Software................................	44
 Over the Air Download.................................	45
PC Display
 Setting up Your PC Software
(Based on Windows XP)...............................	46
 Display Modes ..............................................	47
 Setting the PC...............................................	48
 Changing the Picture Size (PC Mode)..........	49
 Setting the Home theatre PC........................	49

Channel Control
 Storing Channels Automatically....................	16
 Storing Channels Manually...........................	17
 Managing Channels......................................	18
 Fine Tuning Channel Reception....................	24
 LNA (Low Noise Amplifier)............................	25
Picture Control
 Changing the Picture Standard.....................	26
 Customizing the Picture Settings..................	27
 Configuring Detailed Settings on the Picture ...	28
 Selecting the Picture Size.............................	29
 Digital NR / Active Colour /
Auto Motion Plus 100Hz / DNIe ....................	30
 Freezing the Current Picture.........................	30
 Viewing Picture-in-Picture.............................	31
Sound Control
 Sound Features ............................................	33
 Selecting the Sound Mode
(depending on the model).............................	34

WISELINK
 Using the WISELINK Function......................	50
 Using the WISELINK Mode...........................	51
 Using the Photo (JPEG) List.........................	52
 Using the Music (MP3) List...........................	60
About Anynet+
 What is Anynet+?..........................................	63
 Connecting Anynet+ Devices........................	63
 Setting Up Anynet+.......................................	64
 Scanning and Switching between Anynet+
Devices.........................................................	65
 Recording......................................................	66
 Listening through a Home theatre.................	67
 Troubleshooting for Anynet+.........................	67
Appendix
 Teletext Feature (depending on the model)..	68
 Setting Up Your Remote Control...................	70
 Using the Anti-Theft Kensington Lock
(depending on the model).............................	75
 Troubleshooting ............................................	75
 Technical and Environmental Specifications.76

Symbols
Press	Important	Note
	English - 3

List of Parts

Please make sure the following items are included with your LCD TV.

If any items are missing, contact your dealer.

Remote Control &			Power Cord	Cover-Bottom	Cleaning Cloth
Batteries
(AAA x 2)
 Owner’s Instructions			 Warranty card	 Safety Guide	 Registration Cards

Warranty card / Safety Guide / Registration Cards (Not available in all locations)

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall.

For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket.

Samsung Electronics is not responsible for any damage to the product or injury to yourself or others

if you elect to install the TV on your own.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock

Remove the stand and cover the bottom hole with a cap and fasten with two screws.

English - 4

Viewing the Control Panel

Front Panel buttons

Touch the each button to operate.

The product colour and shape may vary depending on the model.

1SOURCE

Toggles between all the available input sources (TV, AV1, AV2, S-Video, Component1,

Component2, PC, HDMI1, HDMI2/DVI, HDMI3

USB).In the on-screen menu, use this button as you use the ENTER/OK button on the remote control.

2MENU

Press to see an on-screen menu of your TV’s features.

3- VOL +

Press to decrease or increase the volume. In the on-screen menu, use the - VOL + buttons as you use the ◄ and ► buttons on the remote control.

4

Press to change channels.

In the on-screen menu, use the

buttons as you use the ▼ and ▲ buttons on the remote control.

(Without the Remote Control, you can turn on the TV by using the Channel buttons.)

5Power Indicator

Blinks and turns off when the power is on and lights up in stand-by mode.

6Remote Control Sensor

Aim the remote control towards this spot on the TV.

7Speakers

8(Power)

Touch the silver sensor below the () mark to turn the TV on and off.

Silver sensor

English - 5

Viewing the Connection Panel

1

2

3

4

5

[Side Panel Jacks]

3

6

7

					!
@																Power Input			0		9				8

The product colour and shape may vary depending on the model.

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.The product colour and shape may vary depending on the model.

1VIDEO / AUDIO L/R

Video and audio inputs for external devices, such as a camcorder or VCR.

2SERVICE

−Connector for service.

−Connect the serial jack between the electro-motion wall mount bracket and your TV when you want to adjust the TV viewing angle using your remote control.

3Connecting external Audio Devices

Connect RCA audio signals from the TV to an external source, such as Audio equipment.

4HDMI IN 1, HDMI IN 2, HDMI IN 3

−Connect to the HDMI jack of a device with HDMI output. These inputs can also be used as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection. When using the optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device. (Not compatible with PC)

−When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture distortion, image breakup or no picture.

−Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card.

(This will result in a blank screen being displayed)

English -6

DVI IN (HDMI 2) AUDIO L/R

DVI audio outputs for external devices.

The external devices that support lower version HDMI mode may not implement sound ouput for theTV with the latest HDMI version (HDMI 1.3.) In this case, connect to HDMI IN2 and DVI IN (HDMI 2) “ R-AUDIO-L” on the back panel of the TV.

Part of lower version HDMI cables may cause annoying flickers or no screen display in this case use the cable that supports the latest HDMI version(HDMI 1.3)

Supported modes for HDMI and Component

	480i	480p	576i	576p	720p	1080i	1080p
HDMI/DVI 50Hz	X	X	X	O	O	O	O
HDMI/DVI 60Hz	X	O	X	X	O	O	O
Component	O	O	O	O	O	O	O

5ANT IN

75Ω Coaxial connector for Aerial/Cable Network.

6WISELINK

-Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3)

7Headphones jack

You can connect a set of headphones if you wish to watch a television programme without disturbing the other people in the room.

Prolonged use of headphones at a high volume may damage your hearing.

8S-VIDEO or VIDEO / AUDIO L/R

-Video (S-Video or Video) and audio inputs for external devices, such as a camcorder or VCR.

9PC IN / AUDIO

Connect to the video and audio output jack on your PC.

0DIGITAL AUDIO OUT (OPTICAL)

Connect to a Digital Audio Component. According to the received audio signal, optical output is selectcted by Dobly or PCM signal. The level of sound can change according to received signal and sound level’s difference can be.

!COMPONENT IN 1, COMPONENT IN 2

Audio (AUDIO L/R) and video (Y/PB/PR) inputs for Component.

@Kensington Lock (depending on the model)

-The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

-If you want to use a locking device, contact the dealer where you purchased the TV.

-The place of the Kensington Lock may be different depending on its model.

English -7

Viewing the Remote Control

 This is a special remote control for the visually impaired persons, and has Braille points on the Power, Channel, Volume, STOP, and PLAY/PAUSE buttons.

The performance of the remote control may be affected by bright light.

1POWER button

(turns the TV on and off)

2Number buttons for direct channel access

3One/Two/Three-digit channel selection

4Channel control button (Refer to page 16)

5This function enables you to view and play photo (JPEG) and audio files (MP3) from an external device. (See page 52(JPEG), 60 (MP3))

6 Volume increase

Volume decrease

7 Temporary sound switch-off

8Displays the main on-screen menu

9Returns to the previous menu

@ Picture size selection

#Electronic Program Guide (EPG) display

$ Sound mode selection % Remote control setup

^Selects a target device to be controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR)

&Press to backlight the VOL, CH, and the active source button (TV, DVD, CABLE,

STB, VCR) on the remote.

* Available source selection

( Previous channel

)Press to switch to your favourite channels.

aRecords for Live Broadcasting

bVCR/DVD Function (Rewind, Stop, Play/Pause, Fast/ Forward)

c Next channel

Previous channel

d Exit the on-screen menu

eControl the cursor in the menu

fUse to see information on the current broadcast

gTOOLS : Use to quickly select frequently used functions.

Anynet+ : Runs the Anynet+ view functions and sets up Anynet+ devices.

h Picture-In-Picture On/Off

iPicture effect selection (Refer to page 26)

j Digital subtitle display k Picture freeze

lIf your remote control is not functioning properly, take out the batteries and press the reset button for about 2~3 seconds.

Reinsert the batteries and try using the remote control again.

Teletext Functions

(Refer to page 68) 8 Teletext index

9Exit from the teletext display (depending on the model)

0 Fastext topic selection

!Teletext display/mix both teletext information and the normal broadcast

@ Teletext size

*Teletext mode selection (LIST/FLOF)

( Teletext sub page

cP :Teletext next page

P :Teletext previous page

d Teletext cancel f Teletext reveal h Teletext hold i Teletext store

English - 8

Installing Batteries in the Remote Control

1 Lift the cover at the back of the remote control upward as shown in the figure.

2 Install two AAA size batteries.

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3 Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1.Is the TV power on?

2.Are the plus and minus ends of the batteries reversed?

3.Are the batteries drained?

4.Is there a power outage, or is the power cord unplugged?

5.Is there a special fluorescent light or neon sign nearby?

Switching On and Off

The main lead is attached to the rear of your set.

1Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2Press the button on the front of the set.

Youon. also can press the POWER button or the TV button on the remote control to turn the TV

The programme that you were watching last is reselected automatically.

3Press the numeric button (0~9) or channel up/down (/) button on the remote control or button on the right side of the set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

4To switch your set off, press the POWER button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1	Press the POWER		button on the remote control.
	The screen is turned off and a red standby indicator appears on the front of your set.
2	To switch your set back on, simply press the POWER				, numeric buttons (0~9), TV button or

channel up/down (/) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.

English - 9

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically:

1Press the POWER button on the remote control. The message Runs the Plug & Play function when

setting the TV up for the first time or when resetting it. Sets the channels, the clocks, as well as other functions.is automatically displayed.

2The message Select Home Mode when installing this TV at home. is automatically displayed.

3Press the ◄ or ► button to select Shop or Home, then press the ENTER/OK button.

The default selection is Home.

We recommend setting the TV to Home mode for the best picture in your home environment.

Shop mode is only intended for use in retail environments.

If the unit is accidentally set to Shop mode, and you want to return to Dynamic (Home) mode, press the Volume button and then hold down the MENU button for five seconds on the TV panel.

4The TV will begin memorizing all of the available channels.

After all the available channels are stored, the Auto program menu reappears.

Press the ENTER/OK button when channel memorization is complete.

The Clock Mode menu is displayed.

To stop the search before it has finished, press the ENTER/OK button with stop selected.

5Press the ENTER/OK button.

Press the ▲ or ▼ button to select Manual for setting the current time manually, then press the ENTER/OK button. The message Set current date and time. is displayed.

If you select Auto. Select the time zone in which you live. is displayed, then go to step 8.

6Press the ◄ or ► button to move to Month, Day, Year, Hour, Minute or am/pm.Set the date and time you want bypressing the ▲ or ▼ button, then press the ENTER/OK button.

You can set the month, day, year, hour, and minute directly by pressing the number buttons on the remote control.

7The message Enjoy your watching. is displayed.

When you have finished, press the ENTER/OK button.

Even if the ENTER/OK button is not pressed, the message will automatically disappear after several seconds.

Plug & Play

Runs thePlug&Playfunctionwhen setting theTV up for the first time or when resetting it.Sets the channels,clocks, as well as other functions.

		OK
			Enter	Return
	Plug & Play
SelectHomeModewheninstallingthisTVathome.
	Shop		Home
	Move		Enter	Skip
	Plug & Play
Press Enter to start channel memory.
				0%
		Start
			Enterf	Skip
	Plug & Play
Auto Store in Progress.		Digital Channel found: 0
6
				3%
Digital Channels are added on the favourite
channel list.
		Stop
			Enter	Skip
	Plug & Play
Auto Store is completed.
3 channels are memorized.
Digital:1	Analog:2
		OK
			Enter	Skip
	Plug & Play
Set the Clock Mode.
Clock Mode			:Auto	
			Enter	Skip
	Plug & Play
Set the Clock Mode.
Clock Mode			: Auto
			Manual
	Move		Enter	Skip

Plug & Play

Set current date and time
Month	Day	Year
01	01	2007
Hour	Minute	am/pm
00	04	am

Move Adjust Enter Skip

English - 10	Continued...

seconds.

Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.

Press the INFO button on the remote control.

English - 11

message will automatically disappear after several

Even if the ENTER/OK button is not pressed, the

The message Enjoy your watching. is displayed. When you have finished, press the ENTER/OK button.

10

Setting the Clock Automatically

8 Press the ENTER/OK button.

Press the ▲ or ▼ button to select Off or On, then the

ENTER/OK button.

The message Select the time zone in which you live. is displayed.

9 Press the ▲ or ▼ button to highlight the time zone for your local area (and to move the highlight to the

appropriate time zone on the map of the United States). Press the ENTER/OK button.

If clock is not automatically set, see pages 35~36. to set the clock.

Plug & Play

Select the time zone in which you live.

New South Wales/ACT

Victoria

QueenSland

SouthAustralia

WestAustralia

Tasmania



Move Enter Skip

Plug & Play

Enjoy your watching.

OK

ATV

3No Time Information

Viewing the Menus

1 With the power on, press the MENU button.
The main menu will appear at the bottom of the screen.	Picture
There are seven menu groups: Picture, Sound, Channel,
Setup, Input, Guide, and PIP.

2Press the ▲ or ▼ button, then press the ENTER/OK button to select an item you want in the menu. Press the

▲/▼/◄/►/ENTER/OK button to display, change, or use the selected items.

3Press the EXIT button to exit.

Using the TOOLS Button

The Tools button allows you to display frequently used Menu and Connection items with a Single button press.

1Press the TOOLS button. The TOOLS menu will appear.

2Press the ▲/▼ button to select a menu, then press the

ENTER/OK button.

3Press the ▲/▼/◄/►/ENTER/OK buttons to display, change, or use the selected items.

For a more detailed description of each function, refer to the corresponding page.

Device List, see page 63 Picture Setting, see page 26 Sound Setting, see page 33 Sleep Timer, see page 36

Delete Favourite Channel, see page 20 Auto Store, see page 16

Mode	:Dynamic
Contrast	: 100
Brightness	: 45
Sharpness	: 75
Colour	: 55
Tint (G/R)	: G50/R50
ColourTone	: Cool1
Backlight	:10

TOOLS

Device List
Picture Size	:	16:9
Picture Mode	:	Dynamic
Sound Mode	:	Standard
SleepTimer	:	Off
Delete from Favourite
Auto Store
	Move	Enter

English - 12

	Viewing External Signal Sources
	You can switch between viewing signals from connected
	equipment, such as a VCR, DVD, Set-Top Box, and the TV
	source (broadcast or cable).		Input
	1	Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Input, then press the

ENTER/OK button.

3 Press the ENTER/OK button again to select Source List.

4Press the ▲ or ▼ button to select the signal source, then press the ENTER/OK button.

Available signal sources: TV, AV1, AV2, S-Video,

Component1, Component2, PC, HDMI1, HDMI2/DVI, HDMI3, USB

You can select these options simply by pressing the SOURCE button on the remote control.

Source List

Edit Name

TV

AV1	----
AV2	----
S-Video	----
Component1	----
Component2	----
PC	----
	
Refresh	Option

English - 13

Editing Device Names

You can give a name to the external source.

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Input, then press the

ENTER/OK button.

3Press the ▲ or ▼ button to select Edit Name, then press the ENTER/OK button.

4Press the ▲ or ▼ button to select the external source to be edited, then press the ENTER/OK button.

5Select the required device by pressing ▲ or ▼, then press the ENTER/OK button.

Available device names: VCR, DVD, D-VHS, Cable STB,

HD STB, Satellite STB, PVR STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo, DVD HDD Recorder, PC, Internet TV Recv., Interactive TV Recv., VOD STB, TV.

6Press the EXIT button to exit.

When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN 1 port, you should set the HDMI1 mode to PC in the Source List of the Input mode. If the HDMI1 mode is not PC, it works depending on the TV setting.

Source List

Input	Edit Name	

Edit Name

AV1	: ----		
AV2	: ----
S-Video	: ----
Component1	: ----
Component2	: ----
PC	: ----
HDMI1	: ----
	
	Move	Enter	Return

Edit Name

AV1	:	----
AV2	:	VCR
S-Video	:	DVD
Component1	:	D-VHS
Component2	:	Cable STB
PC	:	HD STB
HDMI1	:
		
	Move	Enter	Return

English - 14

Setting the Guide

You can set the guide as your preference.

1Press the MENU button to display the menu.

2Press the ▲ or ▼button to select Guide. Press the

ENTER/OK button.

3Select your required guide (Now & Next Guide or Full Guide) by pressing the ▲ or ▼ button.

4Press the ENTER/OK button.

5Select a programme of your choice by pressing the ▲, ▼, ◄, or ► button.

6Press the INFO button to display information about the highlighted programme.

7Press the red button to exchange Now & Next Guide or

Full Guide.

8Press the EXIT button or blue button to exit.

WISELINK

Guide	Full Guide
	Now&Next Guide
	Default Guide	: Full Guide

Full Guide

		DTV 77 Digital
		NBC TODAY
		AM 4:00 -AM 6:00
77 Digital		International news and weather. Including interviews with ne..
Today		AM6:00-AM7:00			AM7:00-AM8:00
7 Digital		NBC TODAY		SUNRISE
7 HD Digital		NBC TODAY		SUNRISE
7 Digital 1		NBC TODAY		SUNRISE
7 Digital 2		NBC TODAY		SUNRISE
7 Digital 3		NBC TODAY		SUNRISE
7 Guide		NBC TODAY		SUNRISE
Watch	INFO	Info  Now&Next	 -2Hours		 +2Hours	 Exit

Setting the Default Guide

You can preset the default guide style.

1Press the MENU button to display the menu.

2Press the ▲ or ▼button to select Guide. Press the

ENTER/OK button.

3Press the ▲ or ▼ button to select Default Guide, then press the ENTER/OK button.

4Select Now/Next or Full Guide using the ▲ or ▼ button, and press the ENTER/OK button.

5Press the EXIT button to exit.

You can select these options by simply pressing the GUIDE button on the remote control.

Guide

Full Guide

Now&Next Guide

Default Guide	: Now&Next
	Full Guide

English - 15

Checking the Digital-Signal Strength - Digital

Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel.

You can, however, adjust your antenna to improve the reception of available digital channels.

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Channel, then press the

ENTER/OK button.

3Press the ▲ or ▼ button to select Signal Strength, then press the ENTER/OK button.

4If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.

Continue to adjust the antenna until you find the best position with the strongest signal.

5Press the EXIT button to exit.

Channel

Manual Store

FineTune

Signal Strength	
LNA	: On

Signal Strength

OK

Enter Return

Storing Channels Automatically

You can scan for the frequency ranges available to you
(availability depends on your country).			Channel List
Automatically allocated programme numbers may not		Channel	Auto Store	
correspond to actual or desired programme numbers.
However you can sort numbers manually and clear any			Manual Store
channels you do not wish to watch.			FineTune
1	Press the MENU button to display the menu.		Signal Strength
2	Press the ▲ or ▼ button to select Channel, then press the		LNA	: On
	ENTER/OK button.
3	Press the ▲ or ▼ button to select Auto Store, then press
	the ENTER/OK button.

4Press the ENTER/OK button again to start the search. The search will end automatically.

To stop the search before it has finished, press the MENU or the ENTER/OK button.

English - 16

Storing Channels Manually

You can store television channels, including those			Channel List
received via cable networks.			Auto Store
When storing channels manually, you can choose:		Channel	Manual Store	
 Whether or not to store each of the channels found.
 The programme number of each stored channel which you			FineTune
	wish to identify.		Signal Strength
1	Press the MENU button to display the menu.		LNA	: On
2	Press the ▲ or ▼ button to select Channel, then press
	the ENTER/OK button.
3	Press the ▲ or ▼ button to select Manual Store, then
	press the ENTER/OK button.

4Select the required option by pressing the ▲ or ▼ button,

	then press the ENTER/OK button.				Channel List
	On digital mode, you can choose Digital Channel, on		Channel		Auto Store
		analog mode ,you can choose Digital Channel and			Manual Store		: Digital Channel
		Analog Channel.
5					FineTune		Analog Channel
	When you are satisfied with your setting, press the
					Signal Strength
	ENTER/OK button.
					LNA		: On
6	Press the EXIT button to exit.
 Programme (Programme number to be assigned to a
	channel)
	−	Press the ▲ or ▼ button until you find the correct
		number.
		You can also select the channel number directly by				Manual Store
		pressing the numeric buttons (0~9).
 Colour System: Auto/PAL					Channel	Frequency		Bandwidth
	−	Press the ▲ or ▼ button to select the required colour
		standard.				634500 KHz		7 MHz
					43
 Sound System: DK/BG/I
	−	Press the ▲ or ▼ button to select the required sound				Start
		standard.
 Channel (When you know the number of the channel to					Adjust	Move	Enter	Return
	be stored)					Manual Store
	−	Press the ▲ or ▼ button to select C (Air channel) or S
		(Cable channel).		Programme		ColourSystem		Sound System
	−	Press the ► button, then press the ▲ or ▼ button to				Auto		BG
		select the required number.			1
		You can also select the channel number directly by			Channel	Search		Store
		pressing the numeric buttons (0~9).		C	2	62 MHz		?
		If there is abnormal sound or no sound, reselect the
		sound standard required.			Adjust	Move	Enter	Return
 Search (When you do not know the channel numbers)
	−	Press the ▲ or ▼ button to start the search.
	−	The tuner scans the frequency range until the first channel or the channel that you selected is
		received on the screen.

 Store (When you store the channel and associated programme number) − Set to OK by pressing the ENTER/OK button.

Channel mode

P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.

C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.

S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.

English - 17

Managing Channels

Using this menu, you can Add/Delete or set Favourite channels and use the program guide for digital broadcasts.

Viewing All Channels

Show all currently available channels.

To use the Channel List function, first run Auto Program.

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Channel, then press the

ENTER/OK button.

3Press the ▲ or ▼ button to select Channel List, then press the ENTER/OK button.

4Press the ◄ button to select Added Channels.

5Press the ▲ or ▼ button to select All Channels, then press the ENTER/OK button.

Shows all currently available channels.

6Press the ▲ or ▼ button to select a channel to view, then press the ENTER/OK button.

You can watch the selected channel.

You can press Number buttons on Remote control for direct channel access,press the same Number button again to switch between digital channel and ATV channel.

Channel

Channels Added

Channels All

Channel List



Auto Store

Manual Store

FineTune

Signal Strength

LNA : On

1♥7HD Digital

2♥7Digital 1

3♥7Digital 2

4♥7Digital 3

ATV0	C1
ATV1	C2
ATV2	C3
ATV3	C4
ATV4	C5
 Zoom	 Select	 Option

1 ♥7HD Digital

2♥7Digital 1

3 ♥7Digital 2

4♥7Digital 3

ATV0	C1
ATV1	C2
ATV2	C3
ATV3	C4
ATV4	C5
 Zoom	 Select	 Option

You can select these options simply by pressing the CH LIST button on the remote control.

Using the Colour buttons on the Remote with the Channel List

 Green (Zoom): Enlarges or shrinks a channel number.  Yellow (Select): Selects multiple channel lists.

 Blue (Option): Displays the Add (or Delete), Add Favourite (or Delete Favourite), Timer Viewing, and

	Channel Name Edit menus.
	A gray-coloured channel refers to a deleted channel. The Add menu only appears for deleted
	channels.
	If you select multiple channel include “favourite	All	1	♥7HD Digital
	channels”,“delete channel etc. channels”and other
		Channels	2	7Digital 1	Add
	channels, you can choose “Add to Favourite or Delete from
			3	♥7Digital 2	Delete
	Favourite or Add or Deselect All”etc.				Add to Favourite
			4	♥7Digital 3
			ATV0	C1	Delete from Favourite
					DeselectAll
			ATV1	C2
			ATV2	C3
			ATV3	C4
			ATV4	C5
			 Zoom	 Select	 Option

Continued...

English - 18

Adding and Erasing Channels

You can add or delete a channel to display the channels you want.

1Press the MENU button to display the menu.

2	Press the ▲ or ▼ button to select Channel, then press the	Channel
	ENTER/OK button.
3	Press the ▲ or ▼ button to select Channel List, then
	press the ENTER/OK button.

4Press the ◄ button to select Added Channels.

5Press the ▲ or ▼ button to select All Channels, then press the ENTER/OK button.

Shows all currently available channels.

6Press the ▲ or ▼ button to select a channel to add, then press the blue button.

7	Press the ENTER/OK button to select Add.
	All added channels will be shown on Added	All
	Channels menu.
8	Press the ▲ or ▼ button to select a channel to delete,	Channels
	then press the blue button.

Press the ENTER/OK button to select Delete.

9Press the EXIT button to exit.

You can also delete a channel in the Added Channels menu in the same manner.

Channels All

You can select these options simply by pressing the CH LIST button on the remote control.

Channel List



Auto Store

Manual Store

FineTune

Signal Strength

LNA : On

1♥7HD Digital

2♥7Digital 1

3♥7Digital 2

4♥7Digital 3

ATV0	C1
ATV1	C2
ATV2	C3
ATV3	C4
ATV4	C5
 Zoom	 Select	 Option

1♥7HD Digital

	2	♥7Digital 1	Delete
	3	♥7Digital 2	Delete from Favourite
			Timer Viewing
	4	♥7Digital 3
			Channel Name Edit
	ATV0	C1
	ATV1	C2
	ATV2	C3
	ATV3	C4
	ATV4	C5
	 Zoom	 Select	 Option

Continued...

English - 19

Setting Your Favourite Channels

You can set channels you watch frequently as favourites.

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Channel, then press the ENTER/OK button.

3Press the ▲ or ▼ button to select Channel List, then press the ENTER/OK button.

4Press the ◄ button to select Added Channels.

5Press the▲ or ▼button to select Favourite,then press the

ENTER/OK button. You can view all favourite channels.

6Press the▲ or ▼button to select Added Channels,

then press the ENTER/OK Button.

7Press the ▲ or ▼ button to select a channel as a favourite channel, then press the blue button.

8Press the ▲ or ▼ button to select Add to Favourite, then press the ENTER/OK button.

The “♥” symbol will be displayed and the channel will be set as a favourite.

9To cancel your favourite channel selection, press the blue button when a favourite channel is selected. Press the ▲ or ▼ button to select Delete from Favourite, then press the ENTER/OK button. The channel is deleted from

Favourites and the “♥” mark also disappears.

10Press the EXIT button to exit.

You can also Add or Delete a channel from Favourites in the All Channels menu in the same manner.

Onlychannels.memorized channels can be set as favourite

All favourite channels will be shown on Favourite menu.

You can select these options simply by pressing the CH LIST button on the remote control.

Easy Setting

1Press the TOOLS button on the remote control.

2Press the ▲/▼ button to select Add to Favourite or

Delete from Favourite, then press the ENTER/OK button. The current channel is added to or deleted from Favourites.

To select the favourite channels you have set up, press the FAV.CH button on the remote control.

Channel

Channels Added

Channels Added

Channel List



Auto Store

Manual Store

FineTune

Signal Strength

LNA : On

1♥7HD Digital

2♥7Digital 1

3♥7Digital 2

4♥7Digital 3

ATV0	C1
ATV1	C2
ATV2	C3
ATV3	C4
ATV4	C5
 Zoom	 Select	 Option

1♥7HD Digital

	2	♥7Digital 1	Delete
	3	♥7Digital 2	Delete from Favourite
			Timer Viewing
	4	♥7Digital 3
			Channel Name Edit
	ATV0	C1
	ATV1	C2
	ATV2	C3
	ATV3	C4
	ATV4	C5
	 Zoom	 Select	 Option

TOOLS

Device List
Picture Size	:	16:9
Picture Mode	:	Dynamic
Sound Mode	:	Standard
SleepTimer	:	Off
Delete from Favourite
Auto Store
	Move	Enter

Continued...

English - 20

Reserving a Program (Time Viewing)

If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List even when you are watching another channel.

To reserve a program set the current time first. See pages 35~36. Reserved channels can only be set if they are in the Channel List (See page 18).

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Channel, then press the ENTER/OK button.

3Press the ▲ or ▼ button to select Channel List, then press the ENTER/OK button.

4Press the ▲ or ▼ button to select a channel, then press the Blue (Options) button.

5Press the ▲ or ▼ button to select Timer Viewing, then press the ENTER/OK button.

The Reserve a Program (Timer Viewing) screen appears.

6Press the ▲/▼/◄/► buttons to reserve a program and then press the ENTER/OK button.

Reserving a program has been completed.

7Press the EXIT button to exit.

You can also reserve a program in the All Channels or Favourite menus using the same procedures.

For information on how to confirm a viewing reservation, refer to page 22.

Channel

Channels Added

Channel List	
Auto Store
Manual Store
FineTune
Signal Strength
LNA	: On

1♥7HD Digital

2♥7Digital 1

3♥7Digital 2

4♥7Digital 3

ATV0	C1
ATV1	C2
ATV2	C3
ATV3	C4
ATV4	C5

Delete

Delete from Favourite

Timer Viewing

Channel Name Edit

 Zoom

 Select

 Option

	Timer Viewing
Antenna	Channel	Repeat
DTV	2	once
Date		StartTime
2007 - 01 - 10		10:09 am
Move	Adjust	Enter	Return

You can select these options simply by pressing the CH LIST button on the remote control.

Digital Program Guide and Viewing Reservation

When a digital channel is selected, and you press the ► button, the Program Guide for the channel appears. You can reserve a program according to the procedures described above.

: A program currently being broadcast.

: A reserved program

Channels Added

1	♥7HD Digital		2007/2/3
2	♥7Digital 1		1:30	am
3	♥7Digital 2		2:27	am
4	♥7Digital 3		2:35	am
ATV0	C1		3:21 am
ATV1	C2		4:33 am
ATV2	C3		6:00 am
ATV3	C4		6:36 am
ATV4	C5
 Zoom	 Option	Watch

Continued...

English - 21

Confirming a Viewing Reservation

You can view, modify or delete a reservation.

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Channel, then press the

ENTER/OK button.

3Press the ▲ or ▼ button to select Channel List, then press the ENTER/OK button.

4Press the ◄ button to select Added Channels.

5Press the ▲ or ▼ button to select Programed, then press the ENTER/OK button.

You can view reservations.

Channel

Channel List



Auto Store

Manual Store

FineTune

Signal Strength

LNA : On

Channels Added

1♥7HD Digital

2♥7Digital 1

3♥7Digital 2

4♥7Digital 3

ATV0	C1
ATV1	C2
ATV2	C3
ATV3	C4
ATV4	C5
	 Zoom	 Select	 Option

Programed

2007/2/3
3:15	am	6-1	No Program Name
4:15	am	6-1	No Program Name
2007/2/4
2:14	am	6-1	No Program Name
2007/2/5
2:15	am	6-1	No Program Name

 Zoom	 Select	 Option Information
Modifying a viewing reservation

6To select a reservation item to be modified, press the ▲

7	or ▼ button and then press the blue button.	Programed	2007/2/3
	Press the ENTER/OK button to select Change Info.		3:15	am	6-1		Change Info
8	Press the ▲/▼/◄/► buttons to change a reservation		4:15	am	6-1		Cancel schedules
							Information
			2007/2/4
	setting and then press the ENTER/OK button.		2:14	am	6-1		No Program Name
	The reservation modification is applied.		2:15	am	6-1		No Program Name
			2007/2/5
Cancelling a reservation
6	To select a reservation item to be cancelled, press the ▲				 Zoom	 Select	 Option Information

or ▼ button, and then press the blue button.

7 Press the ▲ or ▼ button to select Cancel schedules, then press the ENTER/OK button.

8Press the ◄ or ► button to select OK, then press the ENTER/OK button. The viewing reservation has been cancelled.

9Press the EXIT button to exit.

Programed Menu

Change Info: Select to change a viewing reservation.

Cancel schedules: Select to cancel a viewing reservation.

Information: Select to view a viewing reservation.

You can select these options simply by pressing the CH LIST button on the remote control.

Continued...

English - 22

Labeling Channels - Analog

Channels can labeled so that their call letters appear whenever the channel is selected.

1Press the MENU button to display the menu.

2	Press the ▲ or ▼ button to select Channel, then press	Channel
3	the ENTER/OK button.		Channel List	
	Press the ▲ or ▼ button to select Channel List, then
	press the ENTER/OK button.		Auto Store
4	Press the ▲ or ▼ button to select the channel to be		Manual Store
	assigned a new name, then press the blue button.		FineTune

5Press the ▲ or ▼ button to select Channel Name Edit, then press the ENTER/OK button.

6Press the ▲/▼/◄/► button to select a letter, then press the ENTER/OK button.

Numeric buttons: You can enter numbers.

Red button: You can switch between English and Characters.

Green button: You can delete an already entered character.

Yellow button: You can enter a blank space.

Blue button: Press this button to finish renaming a channel.

7When you have finished, press the blue button to assign the new name.

8Press the EXIT button to exit.

The names of digital broadcasting channels are automatically assigned and thus cannot be assigned by users.

Channels Added

Channels Added

Signal Strength

LNA : On

3♥7Digital 2

4	♥7Digital 3
ATV0	C1
ATV1	C2
ATV2	C3
ATV3	C4
ATV4	C5
ATV5	C6
ATV6	C7
 Zoom	 Select	 Option

3♥7Digital 2

4♥7Digital 3

	ATV0	C1	Delete
	ATV1	C2	Add to Favourite
			Timer Viewing
	ATV2	C3
			Channel Name Edit
	ATV3	C4
	ATV4	C5
	ATV5	C6
	ATV6	C7

 Zoom

 Select

 Option

Channel Name Edit

6_

ANumber Character Delete

Blank

VDone

Move Enter Return

English - 23

Fine Tuning Channel Reception

If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation.

If the signal is weak or distorted, you may have to fine tune the channel manually.

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Channel, then press the ENTER/OK button.

3Press the ▲ or ▼ button to select Fine Tune, then press the ENTER/OK button.

4To obtain a sharp, and clear picture and good sound quality, press the ◄ or ► button until you reach the optimal setting. Press the ENTER/OK button.

To reset the fine tuning to 0, select Reset by pressing the ▲ or ▼ button. Press the ENTER/OK button.

5Press the EXIT button to exit.

Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner.

Auto Store

Manual Store

Channel	FineTune	
	Signal Strength
	LNA	: On

FineTune

ATV 6

			0
	Reset
Move	Adjust	Save	Return
	FineTune
ATV 6*			FineTuned
			+3
	Reset
Move	Adjust	Save	Return
	FineTune
ATV 6
			0
	Reset
	Move	Enter	Return

English - 24