FM Transmitter Module for TV
■FM Transmitter is for LCD & PDP TV to listen to TV sound through home audio
■The model name of FM Transmitter is KSR-MX028 and it consists of 3 parts; Circuit Board, Plastic Case and Wire antemna
Product Specifications
Power Requirements |
DC 3.3V |
|
|
Current Consumption |
30mA |
|
|
Dimension(W*H*D) |
53.0*5.0*21.5 mm |
|
|
Operating Temperature |
-10 ~ 50 |
|
|
Operating Humidity |
10% ~ 75% |
|
|
Frequency Range |
88.1MHz ~ 107.9MHz |
|
|
FM Deviation |
75KHz (100% MOD) |
|
|
Input Audio Level |
500mV (RMS) |
|
|
Transmitting Distance |
5m ~ 10m |
Antenna Length |
900mm |
|
|
Application Case
Set up Guide
1. Insert FM Transmitter Module into the Socket which is |
3. Make FM Transmiiter Active |
located at the back side of TV |
|
PRODUCT
FM-Transmitter (KSR-MX028)
Top View
Bottom View
2.Push the menu button on Remote controller for TV and select FM Transmiiter on Sound Menu
4. Tune the Frequency to what you wnat(Frequency Range: 8.1MHz~107.9MHz)
5.Listen to TV sound through FM Radio after tuning FM Radio with the same Frequency as FM Transmitter's
WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions:
1.This device may not cause harmful interference, and
2.This device must accept ant interference received, including interference that may cause undesirable operation.