Samsung K4E170412D-B, K4E160412D-F, K4E160412D-B, K4E160411D-F, K4E160411D-B Datasheet

...
K4E170411D, K4E160411D
CMOS DRAMK4E170412D, K4E160412D
This is a family of 4.194,304 x 4 bit Extended Data Out CMOS DRAMs. Extended Data Out Mode offers high speed random access of memory cells within the same row, so called Hyper Page Mode. Power supply voltage (+5.0V or +3.3V), refresh cycle (2K Ref. or 4K Ref.), access time (-50 or -60), power consumption(Normal or Low power) and package type(SOJ or TSOP-II) are optional features of this family. All of this family have CAS-before-RAS refresh, RAS-only refresh and Hidden refresh capabilities. Furthermore, Self-refresh operation is available in L-version. This 4Mx4 EDO DRAM family is fabricated using Samsungs advanced CMOS process to realize high band-width, low power consumption and high reliability. It may be used as main memory unit for high level computer, microcomputer and personal computer.
Part Identification
- K4E170411D-B(F) (5V, 4K Ref.)
- K4E160411D-B(F) (5V, 2K Ref.)
- K4E170412D-B(F) (3.3V, 4K Ref.)
- K4E160412D-B(F) (3.3V, 2K Ref.)
Extended Data Out Mode operation (Fast Page Mode with Extended Data Out)
CAS-before-RAS refresh capability
RAS-only and Hidden refresh capability
Self-refresh capability (L-ver only)
Fast parallel test mode capability
TTL(5V)/LVTTL(3.3V) compatible inputs and outputs
Early Write or output enable controlled write
JEDEC Standard pinout
Available in Plastic SOJ and TSOP(II) packages
Single +5V±10% power supply (5V product)
Single +3.3V±0.3V power supply (3.3V product)
Control Clocks
RAS CAS
W
Vcc Vss
DQ0
to
DQ3
A0-A11
(A0 - A10)*1
A0 - A9
(A0 - A10)*1
Memory Array
4,194,304 x4
Cells
SAMSUNG ELECTRONICS CO., LTD. reserves the right to change products and specifications without notice.
4M x 4Bit CMOS Dynamic RAM with Extended Data Out
DESCRIPTION
FEATURES
FUNCTIONAL BLOCK DIAGRAM
Refresh Cycles Part
NO.
VCC
Refresh
cycle
Refresh period
Normal L-ver
K4E170411D 5V
4K 64ms
128ms
K4E170412D 3.3V K4E160411D 5V
2K 32ms
K4E160412D 3.3V
Performance Range
Speed
tRAC tCAC tRC tHPC
Remark
-50 50ns 15ns 84ns 20ns 5V/3.3V
-60 60ns 17ns 104ns 25ns 5V/3.3V
Active Power Dissipation
Speed
3.3V 5V
4K 2K 4K 2K
-50 324 396 495 605
-60 288 360 440 550
Unit : mW
Sense Amps & I/O
Data out
Buffer
Data in
Buffer
OE
Note) *1 : 2K Refresh
Col. Address Buffer
Row Address Buffer
Refresh Counter
Refresh Control
Refresh Timer
Column Decoder
Row Decoder
VBB Generator
K4E170411D, K4E160411D
CMOS DRAMK4E170412D, K4E160412D
PIN CONFIGURATION (Top Views)
Pin Name Pin Function
A0 - A11 Address Inputs (4K Product) A0 - A10 Address Inputs (2K Product)
DQ0 - 3 Data In/Out
VSS Ground RAS Row Address Strobe CAS Column Address Strobe
W Read/Write Input
OE Data Output Enable
VCC
Power(+5.0V) Power(+3.3V)
N.C No Connection (2K Ref. product)
VCC DQ0 DQ1
W
RAS
*A11(N.C)
A10
A0 A1 A2 A3
VCC
VSS DQ3 DQ2 CAS OE A9
A8 A7 A6 A5 A4 VSS
1 2 3 4 5 6
7 8 9 10 11 12
24 23 22 21 20 19
18 17 16 15 14 13
VCC DQ0 DQ1
W
RAS
*A11(N.C)
A10
A0 A1 A2 A3
VCC
VSS DQ3 DQ2 CAS OE A9
A8 A7 A6 A5 A4 VSS
1 2 3 4 5 6
7 8 9 10 11 12
24 23 22 21 20 19
18 17 16 15 14 13
*A11 is N.C for K4E160411(2)D(5V/3.3V, 2K Ref. product) B : 300mil 26(24) SOJ
F: 300mil 26(24) TSOP II
• K4E17(6)0411(2)D-B
• K4E17(6)0411(2)D-F
K4E170411D, K4E160411D
CMOS DRAMK4E170412D, K4E160412D
ABSOLUTE MAXIMUM RATINGS
* Permanent device damage may occur if "ABSOLUTE MAXIMUM RATINGS" are exceeded. Functional operation should be restricted to
the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Parameter Symbol
Rating
Units
3.3V 5V
Voltage on any pin relative to VSS VIN,VOUT -0.5 to +4.6 -1.0 to +7.0 V Voltage on VCC supply relative to VSS VCC -0.5 to +4.6 -1.0 to +7.0 V Storage Temperature Tstg -55 to +150 -55 to +150 °C Power Dissipation PD 1 1 W Short Circuit Output Current IOS Address 50 50 mA
RECOMMENDED OPERATING CONDITIONS (Voltage referenced to Vss, TA= 0 to 70°C)
*1 : VCC+1.3V/15ns(3.3V), VCC+2.0/20ns(5V), Pulse width is measured at VCC *2 : -1.3V/15ns(3.3V), -2.0/20ns(5V), Pulse width is measured at VSS
Parameter Symbol
3.3V 5V Units
Min Typ Max Min Typ Max
Supply Voltage VCC 3.0 3.3 3.6 4.5 5.0 5.5 V Ground VSS 0 0 0 0 0 0 V Input High Voltage VIH 2.0 -
VCC+0.3
*1
2.4 -
VCC+1.0
*1
V
Input Low Voltage VIL
-0.3
*2
- 0.8
-1.0
*2
- 0.8 V
DC AND OPERATING CHARACTERISTICS (Recommended operating conditions unless otherwise noted.)
Max Parameter Symbol Min Max Units
3.3V
Input Leakage Current (Any input 0≤VIN≤VIN+0.3V, all other input pins not under test=0 Volt)
II(L) -5 5 uA
Output Leakage Current (Data out is disabled, 0V≤VOUT≤VCC)
IO(L) -5 5 uA
Output High Voltage Level(IOH=-2mA) VOH 2.4 - V Output Low Voltage Level(IOL=2mA) VOL - 0.4 V
5V
Input Leakage Current (Any input 0≤VIN≤VIN+0.5V, all other input pins not under test=0 Volt)
II(L) -5 5 uA
Output Leakage Current (Data out is disabled, 0V≤VOUT≤VCC)
IO(L) -5 5 uA
Output High Voltage Level(IOH=-5mA) VOH 2.4 - V Output Low Voltage Level(IOL=4.2mA) VOL - 0.4 V
K4E170411D, K4E160411D
CMOS DRAMK4E170412D, K4E160412D
*Note :
ICC1, ICC3, ICC4 and ICC6 are dependent on output loading and cycle rates. Specified values are obtained with the output open. ICC is specified as an average current. In ICC1, ICC3, ICC6 and ICC7, address can be changed maximum once while RAS=VIL. In ICC4, address can be changed maximum once within one Hyper page mode cycle time, tHPC.
DC AND OPERATING CHARACTERISTICS (Continued)
ICC1* : Operating Current (RAS and CAS cycling @tRC=min.) ICC2 : Standby Current (RAS=CAS=W=VIH) ICC3* : RAS-only Refresh Current (CAS=VIH, RAS cycling @tRC=min.) ICC4* : Hyper Page Mode Current (RAS=VIL, CAS, Address cycling @tHPC=min.) ICC5 : Standby Current (RAS=CAS=W=VCC-0.2V) ICC6* : CAS-Before-RAS Refresh Current (RAS and CAS cycling @tRC=min.) ICC7 : Battery back-up current, Average power supply current, Battery back-up mode Input high voltage(VIH)=VCC-0.2V, Input low voltage(VIL)=0.2V, CAS=0.2V, DQ=Dont care, TRC=31.25us(4K/L-ver), 62.5us(2K/L-ver), TRAS=TRASmin~300ns ICCS : Self Refresh Current RAS=CAS=0.2V, W=OE=A0 ~ A11=VCC-0.2V or 0.2V, DQ0 ~ DQ3=VCC-0.2V, 0.2V or Open
Symbol Power Speed
Max
Units
K4E170412D K4E160412D K4E170411D K4E160411D
ICC1 Dont care
-50
-60
90 80
110 100
90 80
110 100
mA mA
ICC2
Normal
L
Dont care
1 1
1 1
2 1
2 1
mA mA
ICC3 Dont care
-50
-60
90 80
110 100
90 80
110 100
mA mA
ICC4 Dont care
-50
-60
80 70
90 80
80 70
90 80
mA mA
ICC5
Normal
L
Dont care
0.5
200
0.5
200
1
250
1
250
mA
uA
ICC6 Dont care
-50
-60
90 80
110 100
90 80
110 100
mA mA
ICC7 L Dont care 250 250 300 300 uA
ICCS L Dont care 200 200 250 250 uA
K4E170411D, K4E160411D
CMOS DRAMK4E170412D, K4E160412D
CAPACITANCE (TA=25°C, VCC=5V or 3.3V, f=1MHz)
Parameter Symbol Min Max Units
Input capacitance [A0 ~ A11] CIN1 - 5 pF Input capacitance [RAS, CAS, W, OE] CIN2 - 7 pF Output capacitance [DQ0 - DQ3] CDQ - 7 pF
Test condition (5V device) : VCC=5.0V±10%, Vih/Vil=2.4/0.8V, Voh/Vol=2.0/0.8V
Parameter Symbol
-50 -60 Units Notes
Min Max Min Max
Random read or write cycle time
tRC
84 104 ns
Read-modify-write cycle time
tRWC
116 140 ns
Access time from RAS
tRAC
50 60 ns 3,4,10
Access time from CAS
tCAC
13 15 ns 3,4,5
Access time from column address
tAA
25 30 ns 3,10
CAS to output in Low-Z
tCLZ
3 3 ns 3
Output buffer turn-off delay from CAS
tCEZ
3 13 3 15 ns 6,14
OE to output in Low-Z
tOLZ
3 3 ns 3
Transition time (rise and fall)
tT
2 50 2 50 ns 2
RAS precharge time
tRP
30 40 ns
RAS pulse width
tRAS
50 10K 60 10K ns
RAS hold time
tRSH
13 15 ns
CAS hold time
tCSH
38 45 ns
CAS pulse width
tCAS
8 10K 10 10K ns
RAS to CAS delay time
tRCD
20 37 20 45 ns 4
RAS to column address delay time
tRAD
15 25 15 30 ns 10
CAS to RAS precharge time
tCRP
5 5 ns
Row address set-up time
tASR
0 0 ns
Row address hold time
tRAH
10 10 ns
Column address set-up time
tASC
0 0 ns
Column address hold time
tCAH
8 10 ns
Column address to RAS lead time
tRAL
25 30 ns
Read command set-up time
tRCS
0 0 ns
Read command hold time referenced to CAS
tRCH
0 0 ns 8
Read command hold time referenced to RAS
tRRH
0 0 ns 8
Write command hold time
tWCH
10 10 ns
Write command pulse width
tWP
10 10 ns
Write command to RAS lead time
tRWL
13 15 ns
Write command to CAS lead time
tCWL
8 10 ns
AC CHARACTERISTICS (0°CTA70°C, See note 1,2)
Test condition (3.3V device) : VCC=3.3V±0.3V, Vih/Vil=2.0/0.8V, Voh/Vol=2.0/0.8V
K4E170411D, K4E160411D
CMOS DRAMK4E170412D, K4E160412D
AC CHARACTERISTICS (Continued)
Parameter Symbol
-50 -60 Units Notes
Min Max Min Max
Data set-up time
tDS
0 0 ns 9
Data hold time
tDH
8 10 ns 9
Refresh period (2K, Normal)
tREF
32 32 ms
Refresh period (4K, Normal)
tREF
64 64 ms
Refresh period (L-ver)
tREF
128 128 ms
Write command set-up time
tWCS
0 0 ns 7
CAS to W delay time
tCWD
30 34 ns 7
RAS to W delay time
tRWD
67 79 ns 7
Column address to W delay time
tAWD
42 49 ns 7
CAS precharge to W delay time
tCPWD
47 54 ns
CAS set-up time (CAS -before-RAS refresh)
tCSR
5 5 ns
CAS hold time (CAS -before-RAS refresh)
tCHR
10 10 ns
RAS to CAS precharge time
tRPC
5 5 ns
Access time from CAS precharge
tCPA
28 35 ns 3
Hyper Page cycle time
tHPC
20 25 ns 13
Hyper Page read-modify-write cycle time
tHPRWC
47 56 ns 13
CAS precharge time (Hyper Page cycle)
tCP
8 10 ns
RAS pulse width (Hyper Page cycle)
tRASP
50 200K 60 200K ns
RAS hold time from CAS precharge
tRHCP
30 35 ns
OE access time
tOEA
13 15 ns
OE to data delay
tOED
13 15 ns
Output buffer turn off delay time from OE
tOEZ
3 13 3 15 ns 6
OE command hold time
tOEH
13 15 ns
Write command set-up time (Test mode in)
tWTS
10 10 ns 11
Write command hold time (Test mode in)
tWTH
10 10 ns 11
W to RAS precharge time(C-B-R refresh)
tWRP
10 10 ns
W to RAS hold time(C-B-R refresh)
tWRH
10 10 ns
Output data hold time
tDOH
5 5 ns
Output buffer turn off delay from RAS
tREZ
3 13 3 15 ns 6,14
Output buffer turn off delay from W
tWEZ
3 13 3 15 ns 6
W to data delay
tWED
15 15 ns
OE to CAS hold time
tOCH
5 5 ns
CAS hold time to OE
tCHO
5 5 ns
OE precharge time
tOEP
5 5 ns
W pulse width (Hyper Page Cycle)
tWPE
5 5 ns
RAS pulse width (C-B-R self refresh)
tRASS
100 100 us 15,16,17
RAS precharge time (C-B-R self refresh)
tRPS
90 110 ns 15,16,17
CAS hold time (C-B-R self refresh)
tCHS
-50 -50 ns 15,16,17
K4E170411D, K4E160411D
CMOS DRAMK4E170412D, K4E160412D
TEST MODE CYCLE
Parameter Symbol
-50 -60 Units Note
Min Max Min Max
Random read or write cycle time
tRC
89 109 ns
Read-modify-write cycle time
tRWC
121 145 ns
Access time from RAS
tRAC
55 65 ns 3,4,10,12
Access time from CAS
tCAC
18 20 ns 3,4,5,12
Access time from column address
tAA
30 35 ns 3,10,12
RAS pulse width
tRAS
55 10K 65 10K ns
CAS pulse width
tCAS
13 10K 15 10K ns
RAS hold time
tRSH
18 20 ns
CAS hold time
tCSH
43 50 ns
Column address to RAS lead time
tRAL
30 35 ns
CAS to W delay time
tCWD
35 39 ns 7
RAS to W delay time
tRWD
72 84 ns 7
Column address to W delay time
tAWD
47 54 ns 7
CAS precharge to W delay time
tCPWD
52 59 ns
Hyper Page cycle time
tHPC
25 30 ns 13
Hyper Page read-modify-write cycle time
tHPRWC
53 61 ns 13
RAS pulse width (Hyper Page cycle)
tRASP
55 200K 65 200K ns
Access time from CAS precharge
tCPA
33 40 ns 3
OE access time
tOEA
18 20 ns
OE to data delay
tOED
18 20 ns
OE command hold time
tOEH
18 20 ns
( Note 11 )
Loading...
+ 14 hidden pages