Samsung JE68-00131B User Manual
JE68-00131B
Rev. 1.02
SRP - 770
Thermal Label Printer
Operator’s Manual
http://www.samsungminiprinters.com
1
Safety Precautions
In using the present appliance, please keep the following safety
regulations in order to prevent any hazard or material damage.
WARNING
Violating following instructions can cause serious injury or death.
Do not plug several products in one
multi-outlet.
This can provoke over-heating and a fire.
If the plug is wet or dirty, dry or wipe it
before usage.
If the plug does not fit perfectly with the
outlet, do not plug in.
Be sure to use only standardized
multi-outlets.
PROHIBITE
Do not pull the cable to unplug.
This can damage the cable, which is the
origin of a fire or a breakdown of the printer.
PROHIBITE
Do not plug in or unplug with your hands
wet.
You can be electrocuted.
PROHIBITE
Do not bend the cable by force or leave it
under any heavy object.
A damaged cable can cause a fire.
PROHIBITE
You must use only the supplied adapter.
It is dangerous to use other adapters.
ONLY SUPPLIED ADAPTER
Keep the plastic bag out of children’s reach.
If not, a child may put the bag on his head.
PROHIBITE
If you observe a strange smoke, odor or
noise from the printer, unplug it before
taking following measures.
Switch off the printer and unplug the set
from the mains.
After the disappearance of the smoke, call
your dealer to repair it.
TO UNPLUG
PRINTER
WARNING
Violating following instructions can cause slight wound or damage the appliance.
Keep the desiccant out of children’s
reach.
If not, they may eat it.
PROHIBITE
Use only approved accessories and do
not try to disassemble, repair or remodel
it for yourself.
Call your dealer when you need these
services.
DISASSEMBLING
PROHIBITED
Do not let water or other foreign objects
in the printer.
If this happened, switch off and unplug the
printer before calling your dealer.
PROHIBITE
PRINER
PRINTER
Install the printer on the stable surface.
If the printer falls down, it can be broken
and you can hurt yourself.
PRINTER
PROHIBITE
Do not use the printer when it is out of
order. This can cause a fire or an
electrocution.
Switch off and unplug the printer before
calling your dealer.
TO UNPLUG
PRINTER
DEALER
2
3
(
(
TOP)
Table of Contents
1. Unpacking
2. Samsung Label Printer
3. Connecting the Power Supply
4. Connecting the Interface Cable
5. Installing or Replacing the Paper Roll
6. Setting the Dip Switches
7. The Self Test
8. The Peel-off
9. Using Fan Fold Paper
10. Driver Install Guide
I. To install SRP-770 windows driver
II. To use USB interface
III. Tip & Trouble shooting
& Repacking......................................................................... 5
...................................................................6
......................................................7
..................................................8
.............................................................10
.....................................................................................11
......................................................................................12
.....................................................................13
.....................................................................14
......................................9
1. Unpacking & Repacking
Your printer box should include these items. If any items are damaged or missing,
please contact your dealer for assistance.
Note : Please keep the packing materials(①,②,④,⑥) for future repacking to send
a printer for repairs.
⑧ Operator’s Manual & CD
⑦ Power Cord
⑤ Printer (SRP-770)
④ Pe-bag
① Printer Box
※ You can repack the printer package in above numeric order(①~⑨)
⑨ Label
(Paper)
⑥ Cushion
③ Power Supply
② Cushion
Bottom)
4
5
2. Samsung Label Printer
Feed Button
Cover Peel-off
Cover Open/Close
Printer Head
Paper Holder
Paper Guide
Status Indicator
Power Switch
3. Connecting the Power Supply
CAUTIONS:
When connecting or disconnecting the power supply from the printer, make sure that
the power supply is not plugged into an electrical outlet. And the power supply’s
rated voltage and your outlet’s voltage do not match, contact your dealer for
assistance. Then do not plug in the power cord. Otherwise, you may damage the
power supply or the printer.
1. Make sure that the printer’s power switch is turned off, and the power supply’s
power cord is unplugged from the electrical outlet.
2. Check the label on the power supply to make sure that the voltage required by the
power supply matches that of your electrical outlet.
3. Plug in the power supply’s cable as shown below. Notice that the flat side of the
plug faces down.
Paper(gap) Sensor
Peel-off Sensor
Power Connector
Interface Connectors
(RS-232C, IEEE1284, USB)
Paper Adjuster
6
Dip Switch
7
4. Connecting the Interface Cable
5.
Installing or Replacing the Paper Roll
Universal Serial Bus
(USB)
Parallel Interface
① Open Cover ② Open Guides
③ Install Roll
Serial Interface
RS-232 default
setting is 19200 baud,
no parity, 8 data bits
and 1 stop bit
④ Close Guides to the Width of the paper
⑤ Close Cover
8
9
Loading...