Samsung I9250 Disassembly and assembly Instructions 6
Level
7.
Disassembly and assembly Instructions
7-1.
Repair
2
7-1-1.
1
Disassembly
Carefully release the screws
at6different locations.
Torque
(
Size:M1.4*L4.0)
(
:1.1±0.1
kgf.cm)
2
Disengage the rear cover with the front
cover by using the hook
1
2
4
3
Be careful not to scratch cover. Follow the numbered sequence when you disjoint
3
Separate TSP connector, LCD connector,
coaxial cable from the PBA.
4
Separate SIDE KEY FPCBs(volume key, power
key), MOTOR.
MOTOR
Be careful not to damage the FPCBs Be careful not to damage the FPCBs
7-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Level2Repair
7.
Saperate the RCV,
5
from the PBA.
RCV module
1.5M
CAM,
CAM
5M
1.5M
module
CAM
5M
CAM
module
Carefully release the screws at INTENNA
6
ASS'Y(1POINT) and separate the
connector from the SUB PBA.
Torque
(
Size:M1.4*L4.0)
(
:1.0±0.1
kgf.cm)
Be careful not to damage the FPCBs Be careful not to scratch cover
7
Separate the coaxial cable from SUB PBA.
Separate the SUB PBA from the front
ASS'Y.
Diassembly completion.
8
Be careful not to damage the wires Be careful not to scratch cover
7-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Loading...