HT-E5550
5.1CH Blu-ray™
Home Entertainment System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service,
please register your product at
www.samsung.com/register
HT-E5550_TK_0316.indd 1 |
2012-03-16 10:50:34 |
Safety Information
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
|
|
|
|
|
|
|
CAUTION |
|
|
|
|
RISK OF ELECTRIC SHOCK |
|
|
|
|
DO NOT OPEN |
|
|
|
|
|
|
|
This symbol indicates “dangerous voltage” |
CAUTION: TO PREVENT ELECTRIC SHOCK, |
This symbol indicates important |
||
inside the product that presents a risk of |
MATCH WIDE BLADE OF PLUG TO WIDE SLOT, |
instructions accompanying the product. |
||
electric shock or personal injury. |
FULLY INSERT. |
|
WARNING
•To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION
•Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
•The Mains plug is used as a disconnect device and shall stay readily operable at any time.
•This apparatus shall always be connected to an AC outlet with a protective grounding connection.
•To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.
CLASS 1 |
LASER PRODUCT |
KLASSE 1 |
LASER PRODUKT |
LUOKAN 1 |
LASER LAITE |
KLASS 1 |
LASER APPARAT |
PRODUCTO |
LÁSER CLASE 1 |
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1 LASER product.
Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
CAUTION
•INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
| 2 English
HT-E5550_TK_0316.indd 2 |
2012-03-16 10:50:42 |
Disc Storage & Management
• Holding Discs
- Fingerprints or scratches on a disc may reduce sound and
picture quality or cause skipping.
-Avoid touching the surface of a disc where data has been recorded.
-Hold the disc by the edges so that fingerprints will not get on the surface.
-Do not stick paper or tape on the disc.
•Cleaning Discs
- If you get fingerprints or dirt on a disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.
-When cleaning, wipe gently from the inside to the outside of the disc.
-Disc Storage
Do not keep in direct sunlight.
Keep in a cool ventilated area.
Keep in a clean protection jacket and store vertically.
Handling Cautions
•Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus.
•To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.
•Do not touch the power plug with a wet hand. It can cause an electric shock.
•Do not plug multiple electric devices into the same wall socket. Ovedrloading a socket can cause it to overheat, resulting in a fire.
•Maintenance of the Cabinet
-Before connecting other components to this product, be sure to turn them off.
-If you move your product suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the product, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.
•If the product makes an abnormal noise or produces a burning smell or smoke, turn off the power switch immediately and disconnect the power plug from the wall outlet. Then, contact the nearest customer service centre for technical assistance. Do not use the product. Using the product as it is may cause a fire or an electric shock.
•To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.
Using the 3D Function
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the 3D function.
•Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea, and headaches.
If you experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest.
•Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses, and rest.
•A responsible adult should frequently check on children who are using the 3D function.
If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.
•Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.)
English 3 |
Information Safety 01
HT-E5550_TK_0316.indd 3 |
2012-03-16 10:50:43 |
Safety Information
•Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects, trip, and/or fall, and cause serious injury.
•If you want to enjoy 3D content, connect a 3D device (3D compliant AV receiver or TV) to the product’s HDMI OUT port using a high-speed HDMI cable. Put on 3D glasses before playing the 3D content.
•The product outputs 3D signals only through HDMI cable connected to the HDMI OUT port.
•As the video resolution in 3D play mode is fixed according to the resolution of the original 3D video, you can not change the resolution to your preference.
•Some functions such as BD Wise, screen size adjustment, and resolution adjustment may not operate properly in 3D play mode.
•You must use a high-speed HDMI cable for proper output of the 3D signal.
•Stay at least three times the width of the screen from the TV when watching 3D images. For example, if you have a 46 inch screen, stay 3.5 meters from the screen.
-Place the 3D video screen at eye level for the best 3D picture.
•When the product is connected to some 3D devices, the 3D effect may not function properly.
•This product does not convert 2D content into 3D.
•“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of the Blu-ray Disc Association.
Copyright
© 2012 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user’s manual may be reproduced or copied without the prior written permission of Samsung Electronics Co.,Ltd.
| 4 English
Licence
•Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
•Manufactured under licence under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTSHD and the Symbol together are registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
•ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under licence. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274
HT-E5550_TK_0316.indd 4 |
2012-03-16 10:50:43 |
•The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
•Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
•This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of
Rovi Corporation. Reverse engineering and disassembly are prohibited.
•Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray Disc Association.
•iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
•This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and
their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer
Information Centre at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Centre, P.O. Box 86851, San Diego, CA, 92138, USA.”
This product incorporates proprietary technology under licence from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.
•Open Source Licence Notice
-In the case of using open source software, Open Source Licences are available on the product menu.
Information Safety 01
English 5 |
HT-E5550_TK_0316.indd 5 |
2012-03-16 10:50:44 |
Contents
SAFETY INFORMATION
2Warning
3Disc Storage & Management
3Handling Cautions
3Using the 3D Function
4Copyright
4Licence
GETTING STARTED
7Disk and Format Compatibility
8 Logos of Discs the product can play
11Accessories
12Front Panel
12Rear Panel
13Remote Control
CONNECTIONS
15Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit
15Connecting the Speakers
16Speaker Components
16Installing the Speakers on the Tallboy Stand
17Connecting The Speakers
18Connecting the Optional Wireless Receiver Module
20Connecting the FM Antenna
20Connecting to an iPod/iPhone
20Using a USB Cable
20Using a Dock
21Connecting to a TV
21 Method 1 Connecting to a TV with an HDMI Cable - Best Quality (Recommended)
21Method 2 Connecting to a TV with a Video Cable - Good Quality
22Connecting to External Devices
22 Method 1 HDMI IN : Connecting to an External Component with an HDMI Cable
22 Method 2 OPTICAL : Connecting an External Digital Audio Component
22Method 3 AUX IN : Connecting an External Analogue Component
| 6 English
23 Connecting to a Network Router
23 Wired Network
23 Wireless Network
SETTINGS
24 The Initial Settings Procedure
26 The Home Screen
26Accessing the Settings Screen
27Settings Menu Functions
32 Networks and the Internet
36 Upgrading Software
MEDIA PLAY
38The AllShare Play Screen
39Playing Files on a USB Storage Device or iPod/iPhone
39iPod/iPhone Models You Can Use with This Product
40The Function Screen
40Playing Commercial Video Discs
40Playing Commercial Audio Discs
41Playing a Disc with User Recorded Content
41 Using the AllShare Network Function
43 Controlling Video Playback
45 Controlling Music Playback
48 Playing Photo Contents
48Using the Tools Menu when a File is
Highlighted
50 Listening to Radio
52Using the Special Effects Remote Control
Buttons
NETWORK SERVICES
54 Using Smart Hub
56 BD-LIVE™
APPENDIX
57 Additional Information
63 Troubleshooting
66 Specifications
HT-E5550_TK_0316.indd 6 |
2012-03-16 10:50:45 |
Getting Started
Disk and Format Compatibility
Disc types and contents your product can play
Media |
Disc Type |
Details |
|
|
Blu-ray Disc |
BD-ROM or BD-RE/-R disc recorded in the BD-RE format. |
|
|
3D Blu-ray Disc |
||
VIDEO |
|
||
DVD-VIDEO, DVD-RW, |
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been |
||
|
DVD-R, DVD+RW, |
recorded and finalised, or a USB storage media containing DivX, MKV, MP4 |
|
|
DVD+R |
contents. |
|
MUSIC |
CD-RW/-R, DVD-RW/-R, |
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage |
|
BD-RE/-R |
media containing MP3 or WMA contents. |
||
|
|||
PHOTO |
CD-RW/-R, DVD-RW/-R, |
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage |
|
BD-RE/-R |
media containing JPEG contents. |
||
|
|NOTE |
The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.
Your product will not play content that has been recorded on a DVD-R at a bit rate that exceeds 10 Mbps.
Your product will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 30 Mbps.
Playback may not work for some types of discs, or when you use specific operations, such as angle change and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.
When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Disc types your product cannot play
• HD DVD |
• DVD-RAM |
• DVD-RW(VR mode) |
• 3.9 GB DVD-R Disc |
• DVD-ROM/PD/MV- |
• Super Audio CD |
• CVD/CD-ROM/CDV/ |
for Authoring. |
Disc, etc |
(except CD layer) |
CD-G/CD-I/LD |
|
|
|
(CD-Gs play audio |
|
|
|
only, not graphics.) |
|
|NOTE |
This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow specific or limited operation and provide only certain features during playback.
Please note that this is not a defect in the product.
Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the manufacture of discs.
Please contact the SAMSUNG Customer Care Centre, if you have questions or encounter difficulty when playing Blu-ray Disc, DVD, or CD discs in this product. Also, refer to rest of this user manual for additional information on playback restrictions.
Some commercial discs and DVD discs purchased outside your region may not play on this product.
English 7 |
Started Getting 02
HT-E5550_TK_0316.indd 7 |
2012-03-16 10:50:46 |
Getting Started
Region Code
Both products and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play.
The Region Number for this product is displayed on the rear panel of the product.
Disc Type |
Region |
Area |
|||
|
Code |
||||
|
|
|
|||
|
|
|
A |
North America, Central America, |
|
|
|
|
South America, Korea, Japan, |
||
|
|
|
Taiwan, Hong Kong and South |
||
|
|
|
|
|
East Asia. |
Blu-ray Disc |
|
|
B |
Europe, Greenland, French |
|
|
|
|
territories, Middle East, Africa, |
||
|
|
|
Australia and New Zealand. |
||
|
|
|
C |
India, China, Russia, Central and |
|
|
|
|
South Asia. |
||
|
|
|
|
|
The U.S., U.S. territories and |
|
|
|
1 |
|
|
|
|
|
|
Canada |
|
|
|
|
|
|
Europe, Japan, the Middle East, |
|
|
|
2 |
|
|
|
|
|
|
Egypt, South Africa, Greenland |
|
|
|
|
|
|
Taiwan, Korea, the Philippines, |
|
|
|
3 |
|
|
|
|
|
|
Indonesia, Hong Kong |
DVD-VIDEO
Mexico, South America,
Central America, Australia,
4 New Zealand, Pacific Islands,
Caribbean
Russia, Eastern Europe, India, 5 most of Africa, North Korea,
Mongolia
6 China
|NOTE |
If the Region number of a Blu-ray Disc/DVDs does not correspond to the Region number of this product, the product cannot play the disc.
| 8 English
Logos of Discs the product can play
Blu-ray Disc |
3D Blu-ray Disc |
BD-LIVE |
Dolby |
DTS |
|
DivX |
|
|
|
|
|
|
|
|
|
|
|
|
PAL broadcast system in
Java
U.K, France, Germany, etc.
Supported Formats
Music File Support
File |
Container |
Audio |
Support Range |
Extension |
Codec |
||
*.mp3 |
MP3 |
MP3 |
- |
|
|
|
|
|
|
|
Compliant with |
|
|
|
WMA version 10 |
|
|
|
* Sampling rates (in |
*.wma |
WMA |
WMA |
kHz) - 8, 11, 16, |
22, 32, 44.1, 48 |
|||
|
|
|
* Bit rates - All bit |
|
|
|
rates in the range |
|
|
|
5kbps to 384kbps |
HT-E5550_TK_0316.indd 8 |
2012-03-16 10:50:47 |
Video File Support
File Extension |
Container |
Video Codec |
Resolution |
Frame rate |
Bit rate |
Audio Codec |
|
(fps) |
(Mbps) |
||||||
|
|
DivX 3.11/4.x |
1920x1080 |
6 ~ 30 |
8 |
MP3 |
|
|
|
/5.1/6.0 |
|||||
*.avi |
AVI |
|
|
|
|
AC3 |
|
H.264 BP/MP/HP |
1920x1080 |
6 ~ 30 |
25 |
LPCM |
|||
|
|
|
|
|
|
DTS Core |
|
|
|
MPEG4 SP/ASP |
1920x1080 |
6 ~ 30 |
8 |
||
|
|
|
|||||
|
|
DivX 3.11/4.x |
1920x1080 |
6 ~ 30 |
8 |
MP3 |
|
|
|
/5.1/6.0 |
|||||
*.mkv |
MKV |
|
|
|
|
AC3 |
|
H.264 BP/MP/HP |
1920x1080 |
6 ~ 30 |
25 |
LPCM |
|||
|
|
|
|
|
|
DTS Core |
|
|
|
MPEG4 SP/ASP |
1920x1080 |
6 ~ 30 |
8 |
||
|
|
|
|||||
|
|
DivX 3.11/4.x |
1920x1080 |
6 ~ 30 |
8 |
MP3 |
|
|
|
/5.1/6.0 |
|||||
*.asf |
ASF |
|
|
|
|
AC3 |
|
H.264 BP/MP/HP |
1920x1080 |
6 ~ 30 |
25 |
LPCM |
|||
|
|
|
|
|
|
WMA |
|
|
|
MPEG4 SP/ASP |
1920x1080 |
6 ~ 30 |
8 |
||
|
|
|
|||||
*.wmv |
WMV (wmv9) |
Window Media |
1920x1080 |
6 ~ 30 |
25 |
WMA |
|
Video v9 |
|||||||
*.mp4 |
MP4 |
H.264 BP/MP/HP |
1920x1080 |
6 ~ 30 |
25 |
MP3 |
|
MPEG4 SP/ASP |
1920x1080 |
6 ~ 30 |
8 |
AAC |
|||
|
|
||||||
*.3gp |
3GPP |
H.264 BP/MP/HP |
1920x1080 |
6 ~ 30 |
25 |
AAC |
|
MPEG4 SP/ASP |
1920x1080 |
6 ~ 30 |
8 |
||||
|
|
|
|||||
|
VRO |
MPEG2 |
1920x1080 |
24/25/30 |
25 |
AC3 |
|
*.vro |
|
|
|
|
MPEG |
||
MPEG1 |
1920x1080 |
24/25/30 |
25 |
||||
|
VOB |
LPCM |
|||||
|
|
MPEG1 |
1920x1080 |
24/25/30 |
25 |
AC3 |
|
*.mpg |
PS |
MPEG2 |
1920x1080 |
24/25/30 |
25 |
MPEG |
|
*.mpeg |
LPCM |
||||||
|
|
H.264 |
1920x1080 |
6 ~ 30 |
25 |
AAC |
|
*.ts |
|
MPEG2 |
1920x1080 |
24/25/30 |
25 |
AC3 |
|
|
|
|
|
|
AAC |
||
*.tp |
TS |
H.264 |
1920x1080 |
6 ~ 30 |
25 |
||
MP3 |
|||||||
*.trp |
|
|
|
|
|
DD+ |
|
|
VC1 |
1920x1080 |
6 ~ 30 |
25 |
|||
|
|
Limitations
-Even when a file is encoded by a supported codec listed above, the file might not be played if its content has a problem.
-Normal playback is not guaranteed if the file’s container information is wrong or the file itself is corrupted.
-Files having higher bit or frame rates than standard may stutter when played back.
English 9 |
Started Getting 02
HT-E5550_TK_0316.indd 9 |
2012-03-16 10:50:50 |
Getting Started
-The Seek (skip) function is not available if the file’s index table is damaged.
-When you playback a file remotely through a network connection, video playback may stutter depending on the network speed.
Video decoder
-Supports up to H.264 Level 4.1
-Does not support H.264 FMO/ASO/RS, VC1 SP/MP/AP L4 and AVCHD
-MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max Above 1280 x 720 : 30 frames max
-Does not support GMC 2 or higher
Audio decoder
-Supports WMA 7, 8, 9 and STD
-Does not support WMA 9 PRO multi-channel files if the number of channels is more than 2 or the files require lossless audio decoding.
-Does not support WMA sampling rate of 22050Hz mono
Supported DivX subtitle file formats
*.ttxt, *.smi, *.srt, *.sub, *.txt
Notes on the USB connection
•Your product supports USB storage media, MP3 players, digital cameras, and USB card readers.
•The product does not support folder or file names longer than 128 characters.
•Some USB/digital camera devices may not be compatible with the product.
•Your product supports the FAT 16, FAT 32, and NTFS files systems.
•Connect USB devices directly to the product’s USB port. Connecting through a USB cable may cause compatibility problems.
•Inserting more than one memory device into a multi-card reader may cause the reader to operate improperly.
•The product does not support the PTP protocol.
•Do not disconnect a USB device during a “loading” process.
•The bigger the image resolution, the longer the image takes to display.
| 10 English
•This product cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial sites.
•Your product only supports video that is under 30fps (frame rate).
•Your product only supports USB Mass Storage Class (MSC) devices such as thumb drives and USB HDD. (HUB is not supported.)
•Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible with this product.
•If some USB devices require excessive power, they may be limited by the circuit safety device.
•If playback from a USB HDD is unstable, provide additional power by plugging the HDD into a wall socket. If the problem continues, contact the USB HDD manufacturer.
•You must remove the USB storage device safely (by performing the “Safely Remove USB” function) to prevent possible damage to the USB memory.
Press the HOME button to move to the home menu, press the YELLOW (C) button, and then press the E button.
•SAMSUNG is not responsible for any data file damage or data loss.
AVCHD
(Advanced Video Codec High Definition)
•This product can play back AVCHD format discs. These discs are normally recorded and used in camcorders.
•The AVCHD format is a high definition digital video camera format.
•The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing format.
•Some AVCHD discs use the “x.v.Colour” format. This product can play back AVCHD discs that use “x.v.Colour” format.
•“x.v.Colour” is a trademark of Sony Corporation.
•“AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and Sony Corporation.
HT-E5550_TK_0316.indd 10 |
2012-03-16 10:50:50 |
|NOTE |
Some AVCHD format discs may not play, depending on the recording conditions.
AVCHD format discs need to be finalised.
“x.v.Colour” offers a wider colour range than normal DVD camcorder discs.
Some DivX, MKV and MP4 format discs may not play, depending on their video resolution and frame rate.
Accessories
Check for the supplied accessories below.
|
|
|
|
|
|
FUNCTION |
|
|
|
|
|
|
TV |
|
|
|
|
|
|
SOURCE |
|
|
|
RECEIVER |
|
|
SLEEP |
|
|
|
BD |
|
TV |
|
|
|
|
RDS DISPLAY |
|
TA |
|
|
|
|
1 |
|
2 |
3 |
|
|
|
PTY- |
|
PTY SEARCH |
PTY+ |
|
|
|
4 |
|
5 |
6 |
|
|
|
7 |
|
8 |
9 |
|
|
|
DISC MENU |
0 |
TITLE MENU |
|
|
|
|
|
|
POPUP |
|
|
|
|
|
|
|
|
Video Cable |
FM Antenna |
User Manual |
|
|
MUTE |
|
|
|
|
VOL |
|
S/W LEVEL |
TUNING |
|
|
|
|
|
/ CH |
|
|
|
|
FULLSCREEN |
|
HOME |
REPEAT |
|
|
|
|
|
TUNER |
|
|
|
|
|
|
MEMORY MO/ST |
|
|
|
|
A |
|
B C |
D |
|
|
|
SMART |
SEARCH ' |
' 3DSOUND |
|
|
|
|
HUB |
|
|
|
|
|
|
vTuner |
AUDIO SUBTITLE SOUND |
||
|
|
(For Power cord) |
|
|
|
EFFECT |
|
|
|
|
|
|
|
iPod Dock |
Toroidal Ferrite Core |
Remote Control/Batteries (AAA size) |
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Started Getting 02
English 11 |
HT-E5550_TK_0316.indd 11 |
2012-03-16 10:50:51 |
Getting Started
Front Panel
PLAY/PAUSE |
|
ENTER |
||||
STOP |
OPEN/CLOSE |
|||||
FUNCTION |
|
|
|
VOLUME CONTROL |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5V 500mA |
DISC TRAY |
DISPLAY |
USB HOST |
POWER |
REMOTE CONTROL
SENSOR
|NOTE |
To upgrade the product's software through the USB Host jack, you must use a USB memory stick.
When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the 6 button on the product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the E button.
Rear Panel
FM ANTENNA
COOLING FAN
iPod |
AUX IN |
VIDEO OUT |
|
SPEAKERS OUT |
|
AUX |
VIDEO |
|
IN |
OUT |
|
|
|
|
: 3 |
SURROUND |
IMPEDANCE |
SURROUND |
OPTICAL |
iPod |
LAN |
WIRELESS |
HDMI OUT |
1 |
HDMI IN |
2 |
DIGITAL |
FM ANT |
|
|
|
AUDIO IN |
|
|
|
|
|
|
|
|
|
SPEAKER OUTPUT LAN TERMINAL |
HDMI OUT |
|
EXTERNAL |
|
DIGITAL |
|||
|
||||||||
CONNECTORS |
|
|
|
AUDIO IN (OPTICAL) |
||||
|
|
TX CARD CONNECTION |
HDMI IN |
|||||
|
|
(WIRELESS) |
|
|
|
|
|
|
|NOTE |
Ensure a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate ventilation. Do not obstruct the cooling fan or ventilation holes.
| 12 English
HT-E5550_TK_0316.indd 12 |
2012-03-16 10:50:54 |
Remote Control
Tour of the Remote Control
Turn the product on and off.
To change to TV mode, press the TV button.
To change to Home Cinema, press the BD button.
Press numeric buttons to operate options.
RECEIVER
BD TV
RDS DISPLAY
|
|
|
Press to select Blu-ray's mode |
FUNCTION |
|
(HDMI1, AUX, BD/DVD, etc.). |
|
TV |
|
or |
|
SOURCE |
|
|
Press to select TV's video mode. |
|
|
|
To open and close the disc tray.
SLEEP |
|
Set a Sleep time to shut off the |
|
|
|
TA |
|
product. |
1 |
2 |
3 |
|
Use the RDS function to receive |
PTY- |
PTY SEARCH |
PTY+ |
|
|
4 |
5 |
6 |
|
|
|
FM stations. |
7 |
8 |
9 |
|
Use to enter the Popup menu/ |
||
Press to view the disc menu. |
|
DISC MENU |
0 |
TITLE MENU |
||
|
|
|
|
|||
|
|
POPUP |
||||
|
|
|
|
|
|
Title menu. |
Press to skip backwards or forwards. |
Press to search backwards or |
|
Press to stop/play a disc. |
forwards. |
|
Press to pause a disc. |
||
Cut off the sound temporarily. |
||
MUTE |
||
|
Adjust the volume.
Press to move to the Home screen.
Press this to see the full screen on a TV.
VOL |
S/W LEVEL |
TUNING |
||
/ CH |
||||
|
|
|
||
|
|
|
|
|
FULLSCREEN |
HOME |
REPEAT |
Search for active FM stations and to change channels.
Use to adjust the level of the subwoofer.
Allows you to repeat a title, chapter, track or disc.
Press to use the Tools menu.
Select on-screen menu items and change menu value.
Return to the previous menu.
These buttons are used both for menus on the product and also
several Blu-ray Disc functions.
TUNER
MEMORY
A B C
SMART SEARCH ' '
HUB
Use to display the playback
information when playing a Blu-ray/DVD disc.
Press to exit the menu.
Use to set a preset radio frequency.
MO/ST
D
3DSOUND
Select MONO or STEREO for radio broadcasts.
Press to use Smart Hub. |
vTuner |
AUDIO SUBTITLE SOUND |
Press to apply 3D sound effect. |
|
EFFECT |
||
Press this to use the vTuner. |
|
|
Press to apply sound effects. |
|
|
|
|
Press to search contents. |
|
|
Press to enjoy an ordinary 2D video |
|
|
|
in 3D mode. |
Selects the disc Audio language. |
|
|
Selects the disc subtitle language. |
|
|
|
English 13 | |
Started Getting 02
HT-E5550_TK_0316.indd 13 |
2012-03-16 10:50:55 |
Getting Started
Installing batteries in the Remote
Control
Battery size: AAA |
2 |
1 |
|NOTE |
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
Assuming typical TV usage, the batteries last for about one year.
The remote control can be used up to approximately 7 meters from the product in a straight line.
Setting the Remote Control
You can control certain functions of your TV with this remote control.
When operating a TV with the remote control
1 . Press the TV button to set the remote control to TV mode.
2 . Turn on your TV.
3 . While holding down the POWER button, enter the code corresponding to your brand of TV.
•If there is more than one code listed for your TV in the table, enter one at a time to determine which code works.
•Example : For a Samsung TV
While holding down the POWER button, use the number buttons to enter 00. If that does not work, try 15, then 16, etc.
4 . If the TV turns off, the setting is complete.
•You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9).
|NOTE |
The remote control may not work on some brands of TV's. Also, some operations may not be possible, depending on your brand of TV.
The remote control will work with Samsung TVs by default.
| 14 English
TV Control Codes
Brand |
Code |
Admiral |
56, 57, 58 |
(M.Wards) |
|
A Mark |
01, 15 |
Anam |
01, 02, 03, 04, 05, |
06, 07, 08, 09, 10, 11, |
|
|
12, 13, 14 |
AOC |
01, 18, 40, 48 |
Bell & Howell |
57, 58, 81 |
(M.Wards) |
|
Brocsonic |
59, 60 |
Candle |
18 |
Cetronic |
03 |
Citizen |
03, 18, 25 |
Cinema |
97 |
Classic |
03 |
Concerto |
18 |
Contec |
46 |
Coronado |
15 |
Craig |
03, 05, 61, 82, 83, 84 |
Croslex |
62 |
Crown |
03 |
Curtis Mates |
59, 61, 63 |
CXC |
03 |
|
02, 03, 04, 15, 16, 17, |
Daewoo |
18, 19, 20, 21, 22, 23, |
24, 25, 26, 27, 28, |
|
|
29, 30, 32, 34, 35, 36, |
|
48, 59, 90 |
Daytron |
40 |
Dynasty |
03 |
Emerson |
03, 15, 40, 46, 59, 61, |
64, 82, 83, 84, 85 |
|
Fisher |
19, 65 |
Funai |
03 |
Futuretech |
03 |
General |
06, 40, 56, 59, 66, |
Electric (GE) |
67, 68 |
Hall Mark |
40 |
Hitachi |
15, 18, 50, 59, 69 |
Inkel |
45 |
JC Penny |
56, 59, 67, 86 |
JVC |
70 |
KTV |
59, 61, 87, 88 |
KEC |
03, 15, 40 |
KMC |
15 |
LG (Goldstar) |
01, 15, 16, 17, 37, |
38, 39, 40, 41, 42, |
|
|
43, 44 |
Luxman |
18 |
LXI (Sears) |
19, 54, 56, 59, 60, 62, |
63, 65, 71 |
|
Magnavox |
15, 17, 18, 48, 54, 59, |
60, 62, 72, 89 |
|
Marantz |
40, 54 |
Matsui |
54 |
MGA |
18, 40 |
Brand |
Code |
Mitsubishi/ |
18, 40, 59, 60, 75 |
MGA |
|
MTC |
18 |
NEC |
18, 19, 20, 40, 59, 60 |
Nikei |
03 |
Onking |
03 |
Onwa |
03 |
Panasonic |
06, 07, 08, 09, 54, 66, |
67, 73, 74 |
|
Penney |
18 |
Philco |
03, 15, 17, 18, 48, 54, |
59, 62, 69, 90 |
|
Philips |
15, 17, 18, 40, 48, |
54, 62, 72 |
|
Pioneer |
63, 66, 80, 91 |
Portland |
15, 18, 59 |
Proton |
40 |
Quasar |
06, 66, 67 |
Radio Shack |
17, 48, 56, 60, 61, 75 |
RCA/Proscan |
18, 59, 67, 76, 77, 78, |
92, 93, 94 |
|
Realistic |
03, 19 |
Sampo |
40 |
Samsung |
00, 15, 16, 17, 40, 43, |
46, 47, 48, 49, |
|
|
59, 60, 98 |
Sanyo |
19, 61, 65 |
Scott |
03, 40, 60, 61 |
Sears |
15, 18, 19 |
Sharp |
15, 57, 64 |
Signature |
57, 58 |
2000 |
|
(M.Wards) |
|
Sony |
50, 51, 52, 53, 55 |
Soundesign |
03, 40 |
Spectricon |
01 |
SSS |
18 |
Sylvania |
18, 40, 48, 54, 59, |
60, 62 |
|
Symphonic |
61, 95, 96 |
Tatung |
06 |
Techwood |
18 |
Teknika |
03, 15, 18, 25 |
TMK |
18, 40 |
Toshiba |
19, 57, 63, 71 |
Vidtech |
18 |
Videch |
59, 60, 69 |
Wards |
15, 17, 18, 40, 48, |
54, 60, 64 |
|
Yamaha |
18 |
York |
40 |
Yupiteru |
03 |
Zenith |
58, 79 |
Zonda |
01 |
Dongyang |
03, 54 |
HT-E5550_TK_0316.indd 14 |
2012-03-16 10:50:57 |
Connections
This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit
If you attach a Toroidal ferrite core to the power cord of the main unit, it will help to prevent RF interference from radio signals.
1.Pull the fixing tab of the Toroidal ferrite core to open it.
2.Make a loop twice in the main unit power cord.
3.Attach the Toroidal ferrite core to the main unit power cord as the figure shows and press it until it clicks.
SPEAKERS OUT
SURROUND
SURROUND |
iPod |
LAN |
WIRELESS |
HDMI |
Connecting the Speakers
|
|
|
Position of the product |
|
|
|
Place it on a stand or cabinet shelf, or |
|
Centre |
|
under the TV stand. |
Subwoofer |
|
Selecting the Listening Position |
|
|
|
Front (R) |
|
|
|
The listening position should be |
|
|
|
|
|
|
Product |
Surround (R) |
located about 2.5 to 3 times the |
|
|
distance of the TV's screen size |
|
|
|
|
|
Front (L) |
|
|
away from the TV. For example, if |
|
|
|
you have a 46 inch screen, locate |
Surround (L) |
|
|
the listening position 2.92 to 3.50 |
|
|
meters from the screen. |
|
|
|
|
Front
Speakers
Centre Speaker
Surround
Speakers
Subwoofer
Place these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the front speakers so that their tweeters will be at the same height as your ear. Align the front face of the front speakers with the front face of the centre speaker or place them slightly in front of the centre speakers.
It is best to install the Centre Speaker at the same height as the front speakers. You can also install it directly over or under the TV.
Place these speakers to the side of your listening position. If there isn't enough room, place these speakers so they face each other. Position them about 60 to 90cm above your ear, facing slightly downward.
*Unlike the front and centre speakers, the surround speakers are used mainly for sound effects. Sound will not come from them all the time.
The position of the subwoofer is not so critical. Place it anywhere you like.
English 15 |
Connections 03
HT-E5550_TK_0316.indd 15 |
2012-03-16 10:50:59 |
Connections
Speaker Components
|
|
|
SCREW (5X20): 12EA |
STAND |
STAND BASE |
SPEAKER CABLE |
SCREW (5X15): 4EA |
(L) (R) |
(L) (R) |
|
|
FRONT SURROUND CENTRE SUBWOOFER
Installing the Speakers on the Tallboy Stand
1. |
Turn the Stand Base upside-down and |
1 |
Stand Base |
2 |
||||
2. |
connect it to the Stand. |
|
|
|
|
|
||
Use the driver to combine the screws (5x20) |
|
|
|
|
|
|
|
|
|
on the 3 marked holes. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3.Straighten a supplied speaker wire and put in the hole on the centre of Stand Base.
4.Connect the upper Speaker to the assembled Stand.
Stand
3 |
4 |
Speaker
Stand
5. |
Insert a screw (5x15) clockwise into the hole |
5 |
6 |
|
on the rear of the speaker using a screwdriver. |
||
6. |
And then connect a speaker cable. |
|
|
This is the appearance after the speaker is |
|
|
|
|
installed. |
|
|
|
Follow this steps to install other speaker. |
|
|
| 16 English |
|
|
HT-E5550_TK_0316.indd 16 |
2012-03-16 10:51:00 |
Connecting The Speakers
1. Match each speaker cable bundle to the correct speaker by matching the colour coded plug on each bundle to the coloured sticker on the bottom of each speaker.
2. To attach speaker wire to each speaker:
a. Press down the red tab on the back of the speaker, insert the red wire, |
Black |
Red |
and then release the tab. |
|
|
b. Press down the black tab on the back of the speaker, insert the black wire, and then release the tab.
3.Connect the speaker wire plugs to the back of the product by matching the colours of the speaker plugs to the colours of the speaker jacks.
Front
Speaker (L)
Centre Speaker
SPEAKERS OUT |
|
|
: 3 |
SURROUND |
IMPEDANCE |
SURROUND |
|
Surround
Speaker (L)
Surround
Speaker (R)
Subwoofer |
SURROUND |
|
|
|
iPod |
LAN |
WIRELESS |
HDM |
|
|
SURROUND |
|
|
|
Front
Speaker (R)
Connections 03
English 17 |
HT-E5550_TK_0316.indd 17 |
2012-03-16 10:51:11 |
Connections
Connecting the Optional Wireless Receiver Module
To connect the surround speakers wirelessly, you have to purchase the wireless receiver module and TX card from your Samsung retailer.
• This product should be connected with the SWA-5000 only.
Centre Speaker
SPEAKERS OUT
SURROUND
SURROUND
Surround |
Surround |
Speaker (L) |
Speaker (R) |
Subwoofer
Front
Speaker (L)
IMPEDANCE : 3
iPod |
LAN WIRELESS |
HDM |
Front |
Speaker (R)
Wireless Receiver Module
1.Follow the 1 to 3 steps as shown on the previous page.
2.With the product turned off, insert the TX card into the TX Card Connection (WIRELESS) on the back of the product.
•Hold the TX card so that the label "WIRELESS" faces upward and insert the card into the port.
•The TX card enables communication between the product and the wireless receiver module.
LAN |
WIRELESS |
HDMI OUT |
3. Connect the left and right surround speakers to the wireless |
TX card |
receiver module. Again, match the colour of the plugs to the jacks |
|
on the wireless receiver module. |
|
4.Plug the power cord of the wireless receiver module into the wall outlet.
5.Turn on the product. The product and wireless receiver module will now communicate with each other and you will hear sound from the Surround speakers.
| 18 English
HT-E5550_TK_0316.indd 18 |
2012-03-16 10:51:13 |
|CAUTION |
If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the rear of speaker to install. However, when you install it, accessories (nails or screws) and installation is not provided by the company.
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker.
Do not hang the subwoofer on the wall through the duct (hole).
Do not insert any other card except the TX card dedicated to the product.
If you insert a different TX card, you can damage the product and may not be able to remove the card easily.
Do not insert the TX card upside down or in the reverse direction.
Insert the TX card when the product is turned off. Inserting the card when it is turned on may cause a problem.
The wireless receiving antenna is built into the wireless receiver module. Keep it away from water and moisture.
For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any obstructions.
If you hear no sound from the wireless surround speakers, switch the mode to Dolby Pro Logic II.
In 2-CH mode, you will hear no sound from the wireless surround speakers.
|NOTE |
If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field.
Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the product, sound from the speakers may be disrupted because of interference.
If you use a device such as a microwave oven, wireless LAN Card, or any other device that uses the 2.4/5.8GHz frequencies near the product, sound from the speakers may be disrupted because of interference.
The maximum transmission distance from the product to the wireless receiver module is about 33 feet (10m), but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the product and the wireless receiver module, the system may not operate at all, because the radio wave cannot penetrate metal.
If the product doesn't make a wireless connection, you need to run an ID Set between the product and wireless receiver module. With the product turned off, press "0""1""3""5" on the remote control. Turn on the wireless receiver module. Then, press and hold the “ID SET” button on the back of the wireless receiver module for 5 seconds, and then turn the product on.
English 19 |
Connections 03
HT-E5550_TK_0316.indd 19 |
2012-03-16 10:51:14 |
Connections
Connecting the FM Antenna
FM Antenna (supplied)
SPEAKERS OUT
SURROUND
SURROUND
AUX |
VIDEO |
IN |
OUT |
IMPEDANCE : 3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OPTICAL |
|
iPod |
LAN |
WIRELESS |
HDMI OUT |
1 |
HDMI IN |
2 |
DIGITAL |
FM ANT |
AUDIO IN |
1 . Connect the FM antenna supplied to the FM ANTENNA Jack.
2 . Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
|NOTE |
This product does not receive AM broadcasts.
Connecting to an iPod/iPhone
Using a USB Cable
Connect an iPod/iPhone using the USB cable to the front USB port.
Using a Dock
To view a video from your iPod on your TV, you must also connect the Video Out jack on the product to the Video In jack on your TV.
See page 21.
SPEAKERS OUT
|
|
|
|
|
|
|
|
|
|
iPod |
LAN |
WIRELESS |
HDMI OUT |
|
|
|
|
|
|
HDMI IN |
AUX |
VIDEO |
IN |
OUT |
OPTICAL |
|
DIGITAL |
FM ANT |
AUDIO IN |
5V 500mA
iPod
|NOTE |
Make sure to connect the dock connector so that the label “” faces upward.
| 20 English
HT-E5550_TK_0316.indd 20 |
2012-03-16 10:51:15 |
Connecting to a TV
Select either Method 1 or Method 2.
•If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control, and then select the correct external source from the TV's source list (HDMI, Video In, etc.) to view video from the home cinema.
AUX
IN
HDMI OUT |
1 |
HDMI IN |
2 |
(Cable not supplied.)
Method 1 |
|
Method 2 |
|
VIDEO
OUT
OPTICAL |
DIGITAL |
FM ANT |
AUDIO IN |
|
HDMI IN
Method 1 Connecting to a TV with an HDMI Cable - Best Quality (Recommended)
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.
Method 2 Connecting to a TV with a Video Cable - Good Quality
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack on your TV.
|NOTE |
The VIDEO Out jack always outputs in the 576i/480i resolution regardless of the resolution set in the Setup menu.
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the television.
English 21 |
Connections 03
HT-E5550_TK_0316.indd 21 |
2012-03-16 10:51:17 |
Connections
Connecting to External Devices
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the mode changes in this order : BD/DVD D. IN AUX R. IPOD HDMI1 HDMI2 FM BT
R
W
Red
White
(Cable not supplied.)
Method 1
External Devices
|
|
AUX |
VIDEO |
|
|
|
IN |
OUT |
|
|
|
|
OPTICAL |
|
1 |
HDMI IN |
2 |
IN |
FM ANT |
|
|
|
|
Method 2 |
Method 3 |
(Cable not supplied.) |
(Cable not supplied.) |
HDMI OUT |
OPTICAL OUT |
AUDIO OUT |
Method 1 HDMI IN : Connecting to an External Component with an HDMI Cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device. Select the HDMI1 or HDMI2 mode.
Method 2 OPTICAL : Connecting an External Digital Audio Component
To connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-Top-Boxes).
Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital optical cable.
Select the D. IN mode.
Method 3 AUX IN : Connecting an External Analogue Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the external analogue component. Select the AUX mode.
• Be sure to match the colours on the cable plugs to the colours on the input and output jacks.
|NOTE |
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
| 22 English
HT-E5550_TK_0316.indd 22 |
2012-03-16 10:51:18 |
Connecting to a Network Router |
|
Wireless Network |
You can connect your product to your network router using one of the methods illustrated below.
Wired Network
Broadband modem (with integrated router)
Broadband
service
Or
Router
Broadband service
Broadband
modem
|NOTE |
Internet access to Samsung’s Software Update server may not be allowed, depending on the router you use or your ISP’s policy. For more information, contact your ISP (Internet Service Provider).
DSL users, please use a router to make a network connection.
To use the AllShare Play function, you must connect your PC to your network as shown in the illustrations on the left.
The connection can be wired or wireless.
Wireless IP sharer
Broadband
service
|NOTE |
If your wireless IP router supports DHCP, this product can use a DHCP or static IP address to connect to the wireless network.
Set your wireless IP router to Infrastructure mode. Ad-hoc mode is not supported.
The product supports only the following wireless security key protocols:
-WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)
Select a channel on the wireless IP router that is not currently being used. If the channel set for the wireless IP router is currently being used by another device nearby, it will result in interference and communication failure.
If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your router or AP to WEP, TKIP or TKIP-AES (WPS2Mixed), the product will not support a connection in compliance with new WiFi certification specifications.
Wireless LAN, by its nature, may cause interference, depending on the operating conditions (AP performance, distance, obstacles, interference by other radio devices, etc).
English 23 |
Connections 03
HT-E5550_TK_0316.indd 23 |
2012-03-16 10:51:19 |
Settings
The Initial Settings Procedure
•The Home menu will not appear if you do not configure the initial settings.
•The OSD (On Screen Display) may change in this product after you upgrade the software version.
•The access steps may differ depending on the menu you selected.
1 . Turn on your TV after connecting the product, and then turn on the product. When you turn on the product for the first time, the product automatically displays the Initial Settings Language screen.
2 . Use the ▲▼◄► buttons on the remote to select the desired language, and then
press the E button twice. The Start screen appears.
3 . Press the E button to start setup. The Network Settings screen appears.
Initial Settings > Network Settings (1/5)
The next step is to set up a wireless network using an internal LAN Adapter.
Previous
Next
Skip
If you want to connect to your wired network, plug in a network cable.
4 . Press the E button to set up the product’s wireless network connection or select
Skip, and then press the E button to skip network setup. If you selected Skip, go to Step 12.
|NOTE |
The product starts the wireless network connection procedure by default. If you want to set up a wired connection, select Skip, and then go to "Configuring Your Network Connection" on page 32 after you have completed the Initial Settings Procedure.
If you skip wireless network setup here, go to "Wireless Network" on page 33 to set up the product's wireless network connection later.
| 24 English
5 . The product searches for and then displays all available wireless router network connections.
Initial Settings > Network Settings (2/5)
Select your wireless router from the list. |
1 / 4 |
|
KIMING_VTOWER |
Refresh |
|
TIAS |
WPS(PBC) |
|
si-ap |
Previous |
|
surlwang5 |
||
Next |
||
Add Network |
||
Skip |
||
|
6 . Use the ▲▼ buttons to select a router, and then press the E button. The Next button is highlighted.
7 . Press the E button to continue. The Security Key screen appears.
|NOTE |
If you have a WPS(PBC) compatible router, select WPS(PBC) instead, press the E button, and then follow the directions on the screen. When done, go to Step 10.
Initial Settings > Network Settings (4/5) |
|
|
|
||||||
Enter security key. |
|
|
|
|
0 entered |
WPS PIN |
|||
- |
|
|
|
|
|
|
|||
a |
b |
c |
d |
e |
f |
1 |
2 |
3 |
Previous |
g |
h |
i |
j |
k |
l |
4 |
5 |
6 |
Next |
m |
n |
o |
p |
q |
r |
7 |
8 |
9 |
Skip |
s |
t |
u |
v |
w |
x |
y |
z |
0 |
|
|
A/a |
|
|
Space |
|
|
|
|
|
8 . Enter your network's security key. When done, use the ▲▼◄► buttons to select Next, and then press the E button.
|NOTE |
Enter numbers by pressing the number buttons on your remote.
Enter letters by selecting a letter using the ▲▼◄► buttons, and then press E button.
HT-E5550_TK_0316.indd 24 |
2012-03-16 10:51:21 |
To display capital letters (or redisplay small letters if capital letters are displayed), select A/a, and then press the E button.
To display symbols and punctuation, select , and then press the E button. To redisplay letters, select , and then press the E button.
9 . If the connection is successful, the Connection Complete screen appears. Select Next, and then press the E button. The Software Update screen appears.
|NOTE |
If the connection is not successful, select Next, and then press the E button. After you have completed the Initial Settings procedure, go to "Wireless Network" on page 33 to set up the product's wireless network connection.
10 . To upgrade the software, select Update now, and then press the E button. To skip the upgrade, select Update later, press the E button, and go to Step 12.
|NOTE |
If you skipped network set up, you must skip Software Update also.
11 . If there is a Software Update available, the product downloads and installs the upgrade. This can take some time. If there
is no Software Update available, the "There are no new software updates for you to download. You already have the most up to date version." message appears. And then press the E button. The TV Aspect Ratio screen appears.
Initial Settings > TV Aspect Ratio
Set to match the type of television connected.
16:9 |
Original |
16:9 |
Full |
4:3 Letter Box |
Select when connecting to a |
Previous |
|
Next |
|||
16:9 TV Screen. All content |
|||
4:3 Pan-Scan |
will be displayed at original |
|
|
|
aspect ratio. Content |
|
|
|
formatted in 4:3 will be |
|
|
|
displayed with black bars on |
|
|
|
left and right. |
|
12 . Using the ▲▼ buttons, select the aspect ratio that matches your screen, and then press the E button. Select Next, and then press the E button.
You have four choices:
16:9 Original - For widescreen TVs. Displays widescreen pictures in their original 16:9 format and 4:3 pictures (the old, standard format) in 4:3 pillar box format with black bars on the left and right.
16:9 Full - For widescreen TVs. Displays widescreen pictures in their original 16:9 format and expands 4:3 pictures to fill the 16:9 screen.
4:3 Letter Box - For older, standard screen analogue TVs. Displays 4:3 pictures in full screen and 16:9 pictures in letter box format that retains the 16:9 aspect ratio but puts black bars above and below the picture.
4:3 Pan-Scan - For older, standard screen analogue TVs. Displays 4:3 pictures in full screen and 16:9 pictures in Pan-Scan format that fills the screen, but cuts off the left and right sides of the picture and enlarges the middle vertically.
Initial Settings > Complete |
|
|
|
|
|
|
|
|
|
|
|
Setup completed. |
|
|
|
|
|
On-Screen Language |
|
Press Smart Hub to |
|
|
|
Network Settings |
|
enjoy a variety of |
|
|
|
|
Internet content. |
|
OK |
||
Software Update |
- |
|
|
|
|
|
|
|
|
||
TV Aspect |
|
|
Smart Hub |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13 . The Setup completed screen appears. Check the settings to confirm they are correct. Select OK, and then press the E button. The Home screen appears.
|NOTE |
If you want to display the Initial Setting screen again and make changes, select the Reset option. (See page 31)
If you use an HDMI cable to connect the product to an Anynet+ (HDMI-CEC)-compliant Samsung TV and 1.) You have set the Anynet+ (HDMI-CEC) feature to ON in both the TV and the product and 2.) You have set the TV to a language supported by the product, the product will select that language as the preferred language automatically.
English 25 |
Settings 04
HT-E5550_TK_0316.indd 25 |
2012-03-16 10:51:22 |
Settings
The Home Screen
AllShare Play
Play videos or music, or view photos from discs or connected devices.
23
1 |
|
4 |
|
Function |
Settings |
||
Smart Hub |
2 . To access the menus, sub-menus, and options on the Settings screen, please refer to the remote control illustration below.
|NOTE |
If you leave the product in the stop mode for more than 5 minutes without using it, a screen saver will appear on your TV. If the product is left in the screen saver mode for more than 20 minutes, the power will automatically turn off.
Buttons on the Remote Control Used for the Settings Menu
1Smart Hub. Starts Smart Hub. From Smart Hub, you can access YouTube, games, and other apps.
2AllShare Play. Play videos, photos or music content from Disc, USB, PC or mobile devices.
3Function. Select the audio/video input source.
4Settings. Set various functions to suit your personal preferences.
Selecting an Option on the Home Screen
1 . To select an option on the Home screen, move the cursor using the ◄► buttons until it highlights the option of your choice, and then press the E button.
Accessing the Settings Screen
1 . Select Settings on the Home screen, and then press E. The Settings screen appears.
Display |
3D Settings |
16:9 Original |
|
TV Aspect Ratio |
|||
Audio |
Smart Hub Screen Size |
Size 3 |
|
Network |
BD Wise |
Off |
|
Resolution |
Auto |
||
System |
Movie Frame (24Fs) |
Auto |
|
HDMI Colour Format |
Auto |
||
Support |
HDMI Deep Colour |
Auto |
|
Progressive Mode |
Auto |
||
|
| 26 English
FULLSCREEN HOME REPEAT
1
3 2
4
1HOME Button : Press to move to the Home screen.
2RETURN Button : Return to the previous menu.
E (Enter) / DIRECTION Button :
~Press ▲▼◄► to move the cursor or select
3an item.
~Press the E button to activate the currently selected item or confirm a setting.
4EXIT Button : Press to exit the current menu.
|NOTE |
The E button on the product's front panel can be used for same purpose as the E button on the remote control.
Detailed Function Information
Each Settings function, menu item, and individual option is explained in detail on-screen. To view an explanation, use the ▲▼◄► buttons to select the function, menu item, or option.
The explanation will usually appear on the right of the screen. A short description of each Settings function starts on the next page. Additional information on some of the functions is also in the Appendix of this manual.
HT-E5550_TK_0316.indd 26 |
2012-03-16 10:51:23 |
Settings Menu Functions
Display |
|
|
Set up the 3D related functions. |
|
|
|
3D Blu-ray Playback Mode: Select whether to play a Blu- |
|
|
|
ray Disc with 3D contents in 3D Mode. If you move to the |
|
|
3D Settings |
Home or Smart Hub Home menu while in 3D mode, the |
|
|
product will switch to 2D automatically. |
|
|
|
|
Screen Size: Enter the size of the TV attached to the |
|
|
|
product. The product will automatically adjust the 3D output |
|
|
|
to the screen size of the TV. |
|
|
TV Aspect |
Lets you adjust the output of the product to the screen size of |
|
|
your TV. See page 25, Step 12 for a description of the screen |
|
|
|
Ratio |
size options. |
|
|
Smart Hub |
Lets you select the optimal size for the Smart Hub Screen. |
|
|
Screen Size |
|
|
|
|
BD Wise is Samsung’s latest inter-connectivity feature. |
|
|
BD Wise |
When you connect a Samsung product and a Samsung TV |
|
|
with BD Wise to each other via HDMI, and BD Wise is on in |
|
|
|
|
both the product and TV, the product outputs video at the |
|
|
|
video resolution and frame rate of the Blu-ray/DVD Disc. |
|
|
|
Lets you set the output resolution of the HDMI video signal |
|
|
|
to Auto, 1080p, 1080i, 720p, 576p/480p. If Composite |
|
|
Resolution |
is connected, the resolution supports only 576i/480i. The |
|
|
number indicates the number of lines of video per frame. The |
|
|
|
|
i and p indicate interlaced and progressive scan, respectively. |
|
|
|
The more lines, the higher quality. |
|
|
|
Setting the Movie Frame (24Fs) feature to Auto lets the product |
|
|
|
adjust its HDMI output to 24 frames per second automatically for |
|
|
Movie Frame |
improved picture quality if attached to a 24Fs compatible TV. |
|
|
• You can enjoy the Movie Frame (24Fs) feature only on a TV |
|
|
|
(24Fs) |
supporting this frame rate. |
|
|
|
• Movie Frame is only available when the product is in the |
|
|
|
HDMI 1080i or 1080p output resolution modes. |
|
|
HDMI Colour |
Lets you set the colour space format for the HDMI output to |
|
|
Format |
match the capabilities of the connected device (TV, monitor, etc). |
|
|
HDMI Deep |
Lets you set the product to output video from the HDMI OUT |
|
|
jack with Deep Colour. Deep Colour provides more accurate |
|
|
|
Colour |
colour reproduction with greater colour depth. |
|
|
Progressive |
Lets you improve picture quality when viewing DVDs. |
|
|
Mode |
English 27 |
Settings 04
HT-E5550_TK_0316.indd 27 |
2012-03-16 10:51:34 |
Settings
Audio |
Speaker |
You can set the speaker options. |
|
Settings |
|
|
Equaliser |
Let you configure the Equaliser settings manually. |
|
Smart Volume |
Lets you set the product so that the volume remains stable |
|
when a scene change occurs or when you change the |
|
|
|
channel. |
|
Speaker |
Lets you select which speakers you want active, either the |
|
Selection |
TV's speakers or the Home theater's speakers. |
|
|
Lets you direct the sound from the TV to the Home Cinema |
|
|
speakers. Requires an HDMI connection and an Audio Return |
|
|
Channel (ARC) compatible TV. |
|
Audio Return |
• When Audio Return Channel set to on, use HDMI Cable to |
|
connect the product to the TV. At this time, optical input |
|
|
Channel |
does not work. |
|
|
• When Audio Return Channel set to auto, use HDMI Cable to |
|
|
connect the product to the TV. At this time, ARC and optical |
|
|
input is selected automatically. |
|
Digital Output |
Let you set the Digital Output to match the capabilities of the |
|
AV receiver you’ve connected to the product. For more details, |
|
|
|
please refer to the digital output selection table. (See page 62) |
Lets you apply dynamic range control to Dolby Digital, Dolby
Digital Plus, and Dolby True HD audio.
Auto: Automatically controls the dynamic range of Dolby TrueHD audio, based on information in the Dolby TrueHD
Dynamic |
soundtrack. Also turns dynamic range control on for Dolby |
Range Control |
Digital and Dolby Digital Plus. |
Off: Leaves the dynamic range uncompressed, letting you hear the original sound.
On: Turns dynamic range control on for all three Dolby formats. Quieter sounds are made louder and the volume of loud sounds is reduced.
When the product is attached to a digital TV, lets you adjust Audio Sync the audio delay so that the audio syncs with the video. You
can set the delay between 0 and 300 milliseconds.
| 28 English
HT-E5550_TK_0316.indd 28 |
2012-03-16 10:51:35 |
Network |
|
Network |
For more information about Network Settings and network |
|
|
functions, see "Networks and the Internet" starting on page |
|
|
|
Settings |
32. |
|
|
Network |
Let you check whether a connection to the network and the |
|
|
Status |
Internet have been established. |
|
|
Wi-Fi Direct |
Lets you connect a Wi-Fi Direct device to the product using a |
|
|
Peer-to-Peer network, without a wireless router. You can use |
|
|
|
|
the device to control the product. |
|
|
|
Lets you connect other types of Wi-Fi devices to the product |
|
|
Soft AP |
wirelessly. Requires that you create a security key which |
|
|
you must enter into the other Wi-Fi devices when you are |
|
|
|
|
connecting them to the network. |
|
|
AllShare |
Lets you permit external devices such as smart phones to |
|
|
connect to the product and share content with or control the |
|
|
|
Settings |
product. |
|
|
Device Name |
Lets you assign an identifying name to the product. You use |
|
|
this name to identify the product when you are connecting |
|
|
|
|
external Wi-Fi devices (smart phones, tablets, etc.) to it. |
|
|
BD-Live |
Lets you allow, limit, or prohibit an Internet connection for the |
|
|
Settings |
BD-Live service. |
English 29 |
Settings 04
HT-E5550_TK_0316.indd 29 |
2012-03-16 10:51:35 |
Settings
System |
Initial Settings |
Lets you re-run the Initial Settings procedure. See page 24 for |
|
details. |
|
|
|
You can connect a wireless USB keyboard or mouse to |
|
|
the USB port on the front of the product. |
|
|
Keyboard Settings: Lets you configure a wireless USB |
|
|
keyboard connected to the product. |
|
|
| NOTE | |
|
|
You can use the keyboard only when a QWERTY keyboard screen or |
|
|
window appears in the Web Browser. |
|
|
Mouse Settings: Lets you configure a wireless USB mouse |
|
|
connected to the product. You can use the mouse in the |
|
|
product's menu in the same way you use a mouse on your |
|
|
PC. |
|
Device |
To use a mouse with the product's menu: |
|
Manager |
1 . Connect the USB mouse to the product. |
|
|
2 . Click the primary button you selected in Mouse Settings. |
|
|
The Simple Menu appears. |
|
|
3 . Click the menu options you want. |
|
|
| NOTE | |
|
|
Depending on the model of the USB HID keyboard and mouse may not |
|
|
be compatible with your product. |
|
|
Some HID keyboard keys may not work. |
|
|
Wired USB keyboards are not supported. |
|
|
Some applications may not be supported. |
|
|
If a wireless HID Keyboard does not operate because of interference, |
|
|
move the keyboard closer to the product. |
|
|
Anynet+ is a convenient function that offers linked operations |
|
Anynet+ |
with other Samsung products that have the Anynet+ feature |
|
and lets you control those products with one Samsung TV |
|
|
(HDMI-CEC) |
remote. To operate this function, you must connect this |
|
|
product to an Anynet+ Samsung TV using an HDMI cable. |
|
|
You can select the language you prefer for the On-Screen |
|
Language |
menu, disc menu, subtitles, etc. |
|
• The language you select for the disc menu, disc audio, or |
|
|
|
subtitles will only appear if it is supported on the disc. |
| 30 English
HT-E5550_TK_0316.indd 30 |
2012-03-16 10:51:36 |