What the icons and signs in this user manual mean;
WARNING
There is a potential risk of death or serious injury.
CAUTION
There is a potential risk of personal injury or damage
to the product.
To reduce the risk of fire, explosion, electric shock,
or personal injury when using your camcorder, follow
these basic safety precautions.
Here are hints or page number references you will
find helpful when you operate the camcorder.
Settings required before using a function.
These warning signs are here to prevent injury to you and others.
Please follow them explicitly. After reading this section, keep it in a safe place
for future reference.
PRECAUTIONS
Warning!
When using the AC power adaptor with your camcorder, connect the
adaptor to an outlet with protective grounding.
Do not expose the camcorder battery to direct sunlight, heaters, radiators,
fire, or any other source of excessive heat.
•
•
Caution
If you replace the battery with the wrong battery, you can cause an explosion.
Replace only with the same battery or an equivalent type.
To disconnect the apparatus from the mains, the plug must be pulled out
from the mains socket, therefore the mains plug shall be readily operable.
IMPORTANT INFORMATION ON USE
About this user manual
Thank you for purchasing this Samsung Camcorder. Please read
this user manual carefully before you use the camcorder and keep
it handy for future reference. Should your camcorder fail to operate
correctly, refer to Troubleshooting.
This User Manual covers HMX-H300, HMX-H303, HMX-H304,
HMX-H305, HMX-H320 models.
Illustrations of model HMX-H300 are used in this user manual.
The displays in this user manual may not be exactly the same as
those you see on the LCD screen.
Designs and specifications of the camcorder and other
accessories are subject to change without any notice.
In this user manual, the icon or symbol in the parenthesis
appearing in a description of a submenu item indicates it will
appear on the screen when setting the corresponding item.
Ex) Submenu item of “Video Quality” page 54
- “Super Fine” (
): Records in the Super Fine quality.
(If set, the corresponding icon (
) will appear on the
screen.)
The following terms are used in this manual:
‘Scene’ refers to the point where you press the Record Start/
Stop button to start recording until you press again to pause the
recording.
The terms ‘photo’ and ‘still image’ are used interchangeably and
have the same meaning.
•
•
•
•
•
•
Before reading this user manual
2323
Before reading this user manual
Before using this camcorder
• This camcorder records video in H.264 (MPEG4 part10/AVC)
format and in High Definition Video (HD-VIDEO) or Standard
Definition Video (SD-VIDEO).
• You can play back and edit the video recorded by the
camcorder on a personal computer using the internal
software of this camcorder.
• Please note that this camcorder is not compatible with other
digital video formats.
• Before recording important video, make a trial recording.
Play back your trial recording to make sure the video and audio
have been recorded properly.
• Recorded contents may be lost due to a mistake when handling
this camcorder or memory card, etc. Samsung will not provide
compensation for damages due to the loss of recorded contents.
• Make a backup of important recorded data.
Protect your important recorded data by copying the files to
a PC. We also recommend you copy it from your PC to other
recording media for storage. Refer to the software installation and
USB connection guide.
• Copyrights: Please note that this camcorder is intended for
individual use only.
Data recorded on the storage media in this camcorder using
other digital/analogue media or devices is protected by the
Copyright Act and cannot be used without permission of the
owner of the copyright, except for personal enjoyment. Even if
you record an event such as a show, performance, or exhibition
for personal enjoyment, we strongly recommend that you obtain
permission beforehand.
• For Open Source licences information, refer to the
“Opensource-H300.pdf” in the provided CD-ROM.
Notes regarding trademarks
• All the trade names and registered trademarks mentioned in this
manual or other documentation provided with your Samsung
product are trademarks or registered trademarks of their
respective holders. Furthermore, “™” and “
in each case in this manual.
• The SD logo is a trademark. The SDHC logo is a trademark.
• Microsoft
• Intel
• AMD and Athlon™ are either registered trademarks or trademarks
• Macintosh, Mac OS are either registered trademarks or
• YouTube is a trademark of Google Inc.
• Flickr is a trademark of Yahoo.
• twitter is a trademark of Twitter.
• Picasa is a trademark of Google Inc.
• Facebook is a trademark of Facebook Inc.
• Adobe, the Adobe logo, and Adobe Acrobat are either registered
• HDMI, the HDMI logo and High-Definition Multimedia Interface
®
, Windows®, Windows Vista®, Windows® 7, and
®
are either registered trademarks or trademarks of the
DirectX
Microsoft Corporation in the United States and/or other countries.
®
, Core™, Core 2 Duo®, and Pentium® are the registered
trademarks or trademarks of the Intel Corporation in the United
States and other countries.
of AMD in the United States and other countries.
trademarks of Apple Inc. in the United States and/or other
countries.
trademarks or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
are trademarks or registered trademarks of HDMI Licensing LLC.
®
” are not mentioned
3
W
4
4
W
W
4
4
W
W
4
4
W
Safety information
The safety precautions illustrated below are to prevent personal injury or material damages. Heed all instructions carefully.
WARNING
There is a potential risk of death
or serious injury.
CAUTION
There is a potential risk of
personal injury or damage to the
product.
Prohibited action.Do not touch the product.
Do not disassemble the product.Unplug from the power supply.This precaution must be
followed.
WARNING
Do not overload outlets or extension
cords as this may result in abnormal
heat or fire.
No oil! Oil entering the camcorder or
AC power adaptor could cause electric
shock, malfunctions or defects.
4545
Using the camcorder at temperatures
over 140℉(60℃)
fire. Keeping the battery at a high
temperature may cause an explosion.
Do not aim the camcorder directly into
the sun. Doing so could cause eye
injuries, as well as lead to malfunctioning
of internal parts of the product.
may result in
Do not allow water or metal and
inflammable matter to enter the
camcorder or AC power adaptor. Doing
so may pose a fire hazard.
Do not bend the power cord or damage
the AC power adaptor by pressing on it
with a heavy object. There may be a risk
of fire or electric shock.
No sand or dust! Fine sand or dust
entering the camcorder or AC power
adaptor could cause malfunctions or
defects.
Do not disconnect the AC adaptor by
pulling on its power-cord, as this could
damage the power-cord.
W
4
4
W
W
4
4
W
W
4
4
W
WARNING
Safety information
Do not use the AC adaptor if it has
damaged, split or broken cords or
wires. Doing so may cause fire or
electric shock.
Keep the camcorder away from water
when used near the beach or pool
or when it rains. There is a risk of
malfunction or electric shock.
When cleaning the AC adaptor, unplug
the power-cord. There is a risk of
malfunction or electric shock.
Do not connect the AC adaptor unless
the plug can be fully inserted with no
part of the blades exposed.
Keep the used lithium battery or
memory card out of the reach of
children. If the lithium battery or memory
card is swallowed by children, consult
physician immediately.
If the camcorder makes an abnormal
sound, or smell or smokes, unplug the
power-cord immediately and request
service from a Samsung service centre.
There is a risk of fire or personal injury.
Do not dispose of battery pack in a fire
as it may explode.
Do not plug or unplug the power cord
with wet hands. There is a risk of electric
shock.
If the camcorder malfunctions,
immediately detach the AC adaptor or
battery from the camcorder.
There is a risk of fire or injury.
Never use cleaning fluid or similar
chemicals. Do not spray cleaners
directly on the camcorder.
the power-cord unplugged when
Keep
not in use or during lightning storms.
There is a risk of fire.
Do not attempt to disassemble, repair,
or reform the camcorder or the AC
adaptor to avoid a risk of fire or electric
shock.
CAUTION
W
4
4
W
v
W
4
4
W
Do not press the surface of the LCD
with force, or hit it with a sharp object.
If you push the LCD surface, display
unevenness may occur.
Do not drop or expose the camcorder,
battery pack, AC adaptor or other
accessories to severe vibrations or impact.
This may cause a malfunction or injury.
Do not use the camcorder on a tripod
(not supplied) in a place where it is
subject to severe vibrations or impact.
Do not use the camcorder near direct
sunlight or heating equipment. This may
cause a malfunction or injury.
Do not leave the camcorder in a closed
vehicle for a long time, where the
temperature is very high.
Do not expose the camcorder to soot
or steam. Thick soot or steam could
damage the camcorder case or cause a
malfunction.
Do not use the camcorder near dense
exhaust gas generated by gasoline
or diesel engines, or corrosive gas
such as hydrogen sulphide. Doing so
may corrode the external or internal
terminals, disabling normal operation.
Do not expose the camcorder to
insecticide. Insecticide entering the
camcorder could cause the product
to fail to operate normally. Turn the
camcorder off and cover it with vinyl
sheet, etc. before using insecticide.
W
4
4
W
W
4
4
W
Do not expose the camcorder to
sudden changes in temperature or high
humidity. There is also a risk of defect
or electric shock when using outdoors
during lightning storms.
Do not place the camcorder with the
open LCD screen down.
Do not wipe the camcorder body with
benzene or thinner. The exterior coating
could peel off or the surface could
deteriorate.
Do not leave the LCD screen open
when not using the camcorder.
Safety information
67
W
4
4
W
W
4
4
W
w
T
T
w
W
4
4
W
W
4
4
W
CAUTION
Safety information
Do not hold the camcorder by the LCD
monitor when lifting it. The LCD screen
could detach and the camcorder may
fall.
Place the camcorder on a stable surface and a
place with ventilation openings.
Do
not use the camcorder near TV or
radio: This could cause noise on the TV
screen or to radio broadcasts.
Keep important data separately.
Samsung is not responsible for data
loss.
Do not use the camcorder near strong
radio waves or magnetism such as
speakers and a large motor. Noise
could enter video or audio that are being
recorded.
the mains plug where it can be
Use
readily operable. If any problem occurs
with the product, the mains plug must
be removed to disconnect power
completely. Turning off the power button
on the product does not completely
disconnect the power.
Samsung-approved accessories
Use
only. Using products from other
manufacturers may cause overheating,
fire, explosion, electric shock or
personal injuries caused by abnormal
operation.
Contents
Before reading this user manual ....................... 2
This quick start guide introduces the basic operation and features of your camcorder. See the reference pages for more information.
You can record videos in H.264 format!
You can record videos in H.264 format that is convenient to email and share with your friends and family.
You can also take photos with your camcorder.
Quick start guide
STEP 1: Get ready
1.
Attach the battery to the
camcorder. page 22
Align the battery with the
indicator () on the battery
compartment, and then push
the battery in the direction of
the arrow.
2.
Charge the battery fully.
page 23
The battery is fully charged
when the CHG (charging)
indicator light turns green.
3.
Insert a memory card.
page 34
You can use commercially
available SDHC (SD High
Capacity) or SD memory
cards with this camcorder.
Set the appropriate
storage media.
(HMX-H303/H304/H305 only)
page 33
•
•
•
•
STEP2: Record with your camcorder
Recording start/stop button
LCD screen
Your camcorder turns on when you open the LCD screen.
Zoom lever
MODE button
PHOTO button
Mode indicator
12
13
Recording videos
Your camcorder uses advanced H.264 compression
technology to give you the clearest video quality.
1.
Open the LCD screen.
2.
Press the Recording start/stop button.
3.
To stop recording, press the Recording start/stop button.
Recording photos
Your camcorder can record high quality photos with a 16:9
aspect ratio.
1.
Open the LCD screen.
2.
Press the PHOTO button lightly to adjust the focus.
3.
Fully press the PHOTO button when the subject is in focus.
Using ‘Quick On STBY’ by opening/closing the LCD screen.
When you close the LCD screen during standby, your camcorder goes to Quick On STBY mode (power saving mode). You can start
recording quickly when you open the LCD screen.
page 82
The default video resolution setting is “1080/50i”. You can also record videos in SD (standard definition) video quality.
You can also take photos while recording videos. page 40
•
•
Quick start guide
9999
00:00:00 [307Min]
00:00:00 [307Min]
OFFOFF
13
STEP3: Play back videos or photos
Viewing videos or photos on the LCD screen
You can find recordings quickly by using the thumbnail index view.
1.
Touch the Play () tab on the screen in STBY mode.
The thumbnail index view appears. The thumbnail of the latest created or played file is
highlighted.
2.
Touch the thumbnail (HD/SD/) tab, then touch the desired image.
Viewing on a high definition TV
You can enjoy HD (high definition) videos on an HDTV. page 88
You can also play back videos on an SD (standard definition) image quality TV. page 89
•
STEP4: Save recorded videos or photos
Simple and fun! Enjoy the various features of the internal Intelli-studio
programme on your Windows computer.
Using the Intelli-studio programme built in your camcorder, you can import video/
photos into your
computer, edit or share the videos/photos with your friends and family.
For details, see pages 95-98.
Quick start guide
HD
SD
3/3
STBY 00:00:00 [307Min]
9999
OFFOFF
14
Importing and viewing videos/photos from the camcorder to your PC
1.
Launch the Intelli-studio programme by connecting the camcorder to your PC with a USB
cable.
A new file saving screen appears with the Intelli-studio main window. Click “Yes”, and
the uploading procedure starts.
2.
The new files are saved to your PC and registered to “Contents Manager” on the Intellistudio programme.
You can arrange the files by different criteria such as Face, Date, etc.
3.
Double-click on the file you would like to playback.
Sharing videos/photos on YouTube/Flickr/FaceBook
Share your contents with the world by uploading videos and photos directly to a web site with
one click.
Click “Share” “Upload” tab on the browser. page 98
The Intelli-studio runs automatically once the camcorder is connected to a Windows computer
(when you specify “PC Software:On”) page 83
•
•
STEP5: Delete videos or photos
If the camcorder’s storage media is full, you cannot record new videos or photos. Delete videos or photos that you have saved to a
computer from the camcorder’s storage media. Then you can record new videos or photos on newly freed up space.
Touch the Play (
) tab Menu () tab “Delete” on the LCD screen. page 70
Quick start guide
Saved files into your PCContents Manager
Folders directory on your PC
1415
WHAT'S INCLUDED WITH YOUR
CAMCORDER
Your new camcorder comes with the following accessories. If any
of these items is missing from your box, call Samsung’s Customer
Care centre.
Although some features of the models are different, they operate in the same
way.
•
Checking your accessories
Battery
(IA-BP210R)
AC power adaptor
(AA-MA9 type)
Audio/Video cable
USB cableUser manual CDQuick start guide
Mini HDMI cableMemory cardCarrying case
(IA-CC1U27B)
Ferrite Core
Optional accessories
The exact appearance of each item may vary by model.
The contents may vary depending on the sales region.
Parts and accessories can be purchased after consulting with your
local Samsung dealer. SAMSUNG is not responsible for reduced
battery life time or malfunctions caused by any unauthorised use of
accessories such as the AC power adaptor or the batteries.
You can purchase additional batteries (IA-BP210E/IA-BP420E) from
Samsung authorized service centre.
A memory card is not included. See page 35 for memory cards
compatible with your camcorder.
Your camcorder includes the user manual CD and the printed quick
start guide.
•
•
•
•
•
•
Getting to know the camcorder
Getting to know the camcorder
1617
LOCATION OF CONTROLS
Front & Left
1
Internal microphone
2
Lens
3
Lens open/close switch
4
TFT LCD screen (Touch screen)
5
Power button
6
Display button
7
MODE button
8
Anti-shake (OIS) button
9
SMART
AUTO
button
10
AV(Audio/Video) jack
11
USB jack
12
HDMI jack
13
Jack cover (HDMI,USB,AV)
During a recording, be careful not to block the internal
microphone and lens.
HD
1
2
4
3
8 96
1312
5
7
1011
Getting to know the camcorder
1
Mode indicator
: Record mode (Video/Photo)
: Play mode
•
•
2
PHOTO button
3
Zoom (W/T) lever
4
Internal speaker
5
Charging (CHG) indicator
6
Jack cover (DC IN)
7
DC IN jack
8
Recording start/stop button
9
Grip belt
1
Memory card slot
2
Memory card cover
3
Grip belt hook
4
Tripod receptacle
5
Battery release switch
Right Top & Bottom
4
3
5
6
7
8
324
5
9
1
1
2
Getting to know the camcorder
1819
IDENTIFYING THE SCREEN DISPLAYS
The available functions vary depending on the operation mode you’ve selected. Different indicators appear depending on the setting values.
This On Screen Display (OSD) is shown in the record () mode only.
Select the record mode by pressing the MODE button. page 29
•
•
Record mode
STBY 00:00:00 [307Min]
9999
00:00
01/JAN/2011
F2
-
0.3
OFFOFF
Card Full
Settings of functions marked with * are not
retained when the camcorder is turned off.
(Settings of Aperture, Shutter, Focus are not
retained when the operating mode is switched.)
The on-screen indicators are based on an 32GB
SDHC memory card capacity.
For warning indicators and messages, see
pages 101~105
The illustrated items above and their positions
can be changed without notice to improve
performance.
The total number of recordable photos is based
on available space on the storage media.
The largest number the OSD Image Counter can
display is “9,999”.
This camcorder provides one record mode
which combines the video and photo record
modes. You can easily record videos or photos
in the same mode without having to change it.
•
•
•
•
•
•
•
Left of the LCD screen
IndicatorMeaning
/ /
Record mode (Video/Photo) / Smart Auto
STBY
/ / /
Operating status (standby/
recording/Pause) / Self Timer*
,
SCENE, Digital Effect
,
White Balance, Fader*
/
Manual focus* / Touch Point*
F2
/
S.1/50
Manual aperture* / Manual shutter*
- 0.3
EV (Exposure Value)*
//
,
Play tab / Pause tab /
Stop tab, Rec tab
Centre of the LCD screen
IndicatorMeaning
00:00:00
Time counter (video recording time)
Card Full
Warning indicators and messages
[307Min]
Remaining recordable time
IndicatorMeaning
Optical zoom / Digital zoom bar
Time Zone (visit)
00:00
01/JAN/2011
Date/Time
1Sec/72Hr
Time Lapse REC*
Right of the LCD screen
IndicatorMeaning
/
Storage media (Memory card or
internal memory)
(HMX-H303/H304/H305 only)
Battery info. (remaining charge level)
9999
,,
,
Image counter (total number of
recordable photo images), Photo
Resolution, Video Quality, Video
Resolution
/
Anti-shake(OIS) /
Anti-shake(OIS DUO)
,
OFFOFF
Tele Macro*, Super C.Nite
,
Cont. Shot, Wind Cut
Photo Sharpness
Menu tab
1Sec/72Hr
Getting to know the camcorder
This On Screen Display (OSD) is shown in video play (HD/SD) mode only.
Select the Play (
) tab on the LCD screen to select the video play (HD/SD) mode. page 45
•
•
Video play mode
00:00:05/00:00:50
100_0001
01/JAN/2011 00:00
The play related tab, the volume control,
and the return tab appear briefly on the
screen.
They reappear when you touch the
screen anywhere.
For warning indicators and messages,
see pages 101~105.
•
•
Top of the LCD screen
IndicatorMeaning
Video play mode
/
Operating status
(play/pause)
00:00:05/00:00:50
Playback time/
recorded time
/
Storage media
(Memory card or internal
memory) (HMX-H303/
H304/H305 only)
Battery info. (remaining
charge level)
Play Option
100_0001
File name (file number)
,
Video Quality,
Video Resolution
Protect
01/JAN/2011 00:00
Date/Time
Bottom of the LCD screen
IndicatorMeaning
10
Volume control
/
Volume tab /
Play related function tab
(frame advance)
Return tab
Play related function tab
(skip/ search/pause/
playback/slow playback)
Menu tab
Getting to know the camcorder
2021
This On Screen Display (OSD) is shown in photo play ( ) mode only.
Select the Play (
) tab on the LCD screen to select the photo play ( ) mode. page 45
•
•
Photo play mode
1/10
100_0001
01/JAN/2011 00:00
Top of the LCD screen
IndicatorMeaning
Photo play mode
/
X1.1
Slide show / Playback
zoom (X1.1~X8.0)
100_0001
File name (file number)
1/10
Photo image counter
(current image / total
number of recorded
images)
/
Storage media
(Memory card or internal
memory) (HMX-H303/
H304/H305 only)
Battery info.
Erase protection
Photo resolution
01/JAN/2011 00:00
Date/Time
Bottom of the LCD screen
IndicatorMeaning
Volume tab (when
activating slide show)
Return tab
Previous image/Next
image tab
Slide show start tab
Menu tab
Getting started
ATTACHING THE GRIP BELT
Adjust the length of grip belt so that the camcorder is stable when you press the Recording start/stop button with your thumb.
If you make the grip belt too tight and use excessive force to insert your hand, the grip belt hook of the camcorder may be damaged.
ATTACHING THE FERRITE CORE
To reduce electrical interference, attach the core filter to the
AC power adaptor.
Ferrite Core
StopperWind the cable so
that it is not slack.
To attach the core filter to power adaptor, roll the cable
over core filter once.
Be careful not to damage the cable when attaching the
core filter.
•
•
USING THE BATTERY
Purchase extra batteries to allow continuous use of your camcorder.
Attaching the battery
Align the battery with the indicator () on the battery compartment,
and then push the battery in the direction of the arrow.
Detaching the battery
Slide the Battery release switch and pull out the battery.
Gently slide Battery release switch in the direction as shown in the
figure.
Samsung is not responsible for problems that are caused by using unapproved batteries. If you use batteries from other manufacturers, there is a danger
of overheating, fire, or explosion.
Detach the battery from the camcorder with care to prevent it from falling.
•
•
Getting started
2223
Getting started
CHARGING THE BATTERY
You can charge the battery using the AC power adaptor or the USB
cable.
Insert the battery into the camcorder. page 22
To charge, use the supplied AC power adaptor or the USB cable.
•
•
To charge the battery
Charge the battery using the AC power adaptor or the USB cable.
The charging (CHG) indicator lights up and charging starts. After
the battery is fully charged, the charging (CHG) indicator turns
green.
Using the AC power adaptor
Connect the AC power adaptor to the camcorder properly, and then
plug the AC Power adaptor in the wall outlet.
•
Using the USB cable
Connect the USB cable to the camcorder properly, and then
connect the other end to a USB port of a PC.
Please make sure that there are no foreign substances in the plug and
socket when you connect the AC power supply to the camcorder.
When charging, if both the USB cable and AC power adaptor are
connected, the AC power adaptor will override the USB.
You cannot operate the camcorder using USB power only. Use the
power adaptor or battery to power the camcorder.
USB charging time may depend on the type of USB host on your
PC.
If you use the camcorder while you are charging the battery, charging
may take longer.
•
•
•
•
Getting started
2425
CHECKING THE BATTERY STATE
You can check the charging state and remaining battery capacity.
To check the charging state
The colour of the LED indicates the power or charging state.
(Orange)
Charging
(Green)
Fully charged
(Off)
Error
Battery level display
The battery level display shows the amount of battery power
remaining in the battery.
STBY 00:00:00 [307Min]
9999
OFFOFF
Battery Level
Indicator
StateMessage
Fully charged-
25~50% used-
50~75% used-
75~95% used-
95~98% used-
Exhausted (flickers): The device will soon turn off.
Change the battery as soon as possible.
-
-The device will be forced to turn off after 3 seconds.
"Low
battery"
The figures above are based on a fully charged battery at a normal
temperature. Low ambient temperature may affect the use time.
Battery capacity decreases over time and through repeated use.
Keep the camcorder turned off while not operating it.
Store the battery separately when finished charging or when not
using it for a long time. This will help extend the life of the battery.
•
•
•
Getting started
Available running time for the battery
Battery type
the AC power adaptor : approx. 160 min.
Charging time
Video resolution
Continuous recording
time
Playback time
•
Charging time: Approximate time in minutes required to fully
charge a completely exhausted battery.
•
Recording/Playback time: Approximate time available when you
have fully charged the battery.
stands for high definition image quality and ‘SD’ stands for
‘HD’
standard image quality.
•
Recording/Playback time may differ, depending on your usage
and conditions. For example, if you use Zoom or
start/stop
The recording and playback times will be shorter when you use
•
your camcorder in low temperatures.
We recommend using AC power adaptor when you use Time
•
Lapse REC.
button repeatedly, the batteries may discharge faster.
Using
Using the USB cable : approx. 330 min.
Approx.
Approx.
IA-BP210R
HDSD
180 min.Approx. 200 min.
200 min.Approx. 260 min.
Recording
Continuous Recording (without zoom)
The continuous recording time above shows the available recording
time when you record without using any other function after
recording starts.
battery may discharge 2-3 times faster than this reference if you
The
use the record start/stop, the zoom, and the play functions. Prepare
additional batteries with the expectation that the actual recording
time is about 1/3 to 1/2 of the times listed above.
Using an AC power source
We recommend that you use the AC power adaptor to power the
camcorder from a household AC outlet when recording and playing
the camcorder indoors. The connection is the same as that for
battery charging. page
23
2627
•
About the battery
Battery Properties
•
A lithium-ion battery is small-sized and has a high capacity. Low
ambient temperature (below 50ºF (10ºC)) may shorten its usage
time and affect its function. Before recording in low temperatures,
put the battery into your pocket to warm it, then install it in the
camcorder.
Make sure to store the battery separately after use.
•
-
A small amount of battery power is consumed when the
battery is stored in the camcorder even if the camcorder
power is off.
- The battery may be completely discharged, if it has been
installed and left in the camcorder for a long period of time.
If this occurs, the battery may not fully operate even if you
charge it.
- If the battery is not used for a long time, fully charge the battery
and then, using your camcorder, drain the charge completely
once every 1 months to keep the battery functioning properly.
Charge an extra battery before using the camcorder
•
outdoors in cold temperatures.
-
The cold temperature may shorten the length of time you can
use the battery before needing to recharge it.
- Carry the supplied AC power adaptor to charge the battery
while travelling.
Check whether the battery terminal is damaged if the battery
•
falls or is dropped.
-
If you install a battery with the damaged terminal into the
camcorder, you can damage the camcorder.
Remove the battery and the memory card from the
camcorder and disconnect the AC power adaptor after use.
Store the battery in a stable, cool and dry place.
(Recommended
temperature : 59ºF ~ 77ºF (15ºC~ 25ºC),
recommended humidity: 40%~ 60%)
- Temperatures that are too high or too low shorten the battery
lifetime.
-
The battery terminals can become rusty or malfunction if the
battery is stored in a smoky or dusty location.
•
Recycle or dispose of your dead batteries properly.
•
The battery lifetime is limited.
Battery capacity decreases over time and through repeated
use. If decreased usage time between charges becomes
significant, it is probably time to replace the battery with a new
one.
-
Each battery’s life is affected by storage, operating, and
environmental conditions.
Make sure to turn off the camcorder before disconnecting the AC
•
power adaptor. Otherwise, you can damage the storage media or
data.
Use
a nearby wall outlet when using the AC power adaptor.
•
Disconnect the AC power adaptor from the wall outlet immediately if
any malfunction occurs while using your camcorder.
•
Do not place the AC Adaptor in a confined space when you use it,
such as between a wall and a piece of furniture.
•
Be sure to use the included AC power adaptor to power the
camcorder. Using other AC power adaptors could cause electric
shock or result in fire.
•
You can use the AC power adaptor around the world. An AC plug
adaptor is required in some foreign countries. If you need one,
purchase it from your distributor.
•
The charging time will vary depending on the charge remaining in the
battery.
•
battery is charged over 95% after about 2 hours, and the
The
indicator colour changes to green. It takes about 2 hours and 40
minutes for the battery to charge 100%.
Getting started
Basic operation of the camcorder
TURNING YOUR CAMCORDER ON/OFF
Power( ) button
LCD screen
1.
Open the LCD screen to turn on the camcorder.
Your camcorder turns on automatically when you open the
LCD screen.
2.
To turn off the camcorder, press the Power ( ) button for
about one second.
•
The camcorder operates the self-diagnosis function when powered
on. If a warning message appears, refer to ‘warning indicators and
messages’ (pages 101~105) and take corrective actions.
If you close the LCD screen when the power is on, the power saving
mode activates. page 28
The camcorder turns on automatically if connecting the AC power
adaptor or inserting the battery to the camcorder with the LCD
screen open.
•
•
•
When using this camcorder for the first time
When you use your camcorder for the first time or reset it, the time
zone screen appears at start-up. Select your geographical location,
and then set the date and time. page 31
If you do not set the date and time, the time zone screen appears
every time you turn on the camcorder.
2829
Basic operation of the camcorder
ADJUSTING THE LCD SCREEN
The wide LCD screen on your camcorder offers high quality image viewing.
Open the LCD screen with your finger.
1.
•
The screen opens up to 90°.
With the LCD screen open 90°, rotate it forwards (towards the lens) or backwards.
2.
•
You can rotate it up to 180° towards the lens and up to 90° backward. To view recordings more conveniently, rotate the screen by
180° towards the lens, and then fold it back to the body.
Excessive rotation may damage the connective hinge between the screen and the camcorder.
Clean fingerprints or dust on the screen with a soft cloth.
Basic operation of the camcorder
SETTING THE OPERATION MODES
You can switch the operating mode in the following order each time
you
press the MODE button. Record mode () Play mod
e ( ).
Each time the operation mode changes, the respective mode
indicator lights turn on.
Touching the Play (
) tab in the record mode switches the
operation mode to the play mode.
This camcorder provides one record mode which combines the video
and photo record modes.
You can easily record videos or photos in the same mode without
having to change modes.
•
•
USING THE DISPLAY() BUTTON
Switching the information display mode
Press the Display() button.
The full and minimum display modes alternate.
Minimum display mode
STBY
Full display mode
STBY 00:00:00 [307Min]
9999
OFFOFF
Warning indicators and messages may appear depending on the
recording conditions.
The Display (
) button does not work when the menu screen is
being displayed.
•
•
MODE button / Mode indicators
(Record mode):
To record videos or photos.
(Play mode):
To play videos or photos, or edit them.
•
•
STBY 00:00:00 [307Min]
9999
Play tab
Basic operation of the camcorder
3031
USING THE TOUCH PANEL
Touch
Slightly touch items with your finger to select them or to execute
functions.
Do not place a protective film on the LCD screen.
If you leave a film attached to the LCD screen for a long time, strong
adhesion between the film and the surface of the screen may cause
a malfunction of the touch panel.
•
•
Be careful not to accidentally press the buttons near the LCD panel
while using the touch panel.
The tabs and indicators that appear on the LCD screen depend on
the current recording/playback status of your camcorder.
The camcorder does not recognise touches if you touch more than
two points on the screen at the same time. Touch one point at a
time.
Do not use a sharp tipped item such as pen or pencil when using a
tool to touch the screen.
•
•
•
•
The touch panel lets you playback and record with a simple
touch of your finger. Place your hand on the rear side of the
LCD screen, then touch the items displayed on the screen.
CHG
STBY 00:00:00 [307Min]
9999
OFFOFF
Loading...
+ 89 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.