Samsung HL-R5687W User Manual

Owner’s Instructions

HL-R5087W HL-R5687W

A Guide to Digital TV

• What is Digital Television?

Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set. Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digital surround audio, and new services such as multicasting (transmitting more than one program on the same TV channel) and datacasting. Several of these services can be combined into a single digital broadcast.

Digital Television Services

• Digital Picture Quality

DTV programs are transmitted in two different formats. The first is Standard Definition Television (SDTV) and the second is High Definition Television (HDTV).

• SDTV program formats include 480-line interlaced (480i) and 480-line progressive (480p) video.

480i programs are essentially a digital version of our current analog TV programs, while the 480p format offers improved image detail over 480i. Some 480p programs are broadcast in widescreen and are comparable to progressive-scan DVD movies in image quality.

• HDTV program formats include 1080-line interlaced (1080i) and 720-line progressive (720p).

Both HDTV formats are always broadcast in widescreen, and offer much higher picture quality than SDTV.

• Dolby Surround Sound

With DTV, you can listen to a variety of Dolby digital audio formats from Dolby Surround 2.0 to Dolby Digital 5.1 surround, using your home audio system. Many HDTV programs are now broadcast with DD 5.1 soundtracks.

English - 3

CableCARD and Digital Cable Ready TVs

CableCARD and Digital Cable Ready TVs are the products of a new digital cable standard. This new standard is called OpenCable and it is a concerted effort to standardize the digital cable service network interface in North America. For more information, please refer to www.cablelabs.com.

Digital Cable Ready TVs are equipped with a proper digital cable tuner to receive digital cable signals from your local cable service provider. They are also designed to work with digital cable card modules (PCMCIA card modules called CableCARDs). These PCMCIA card modules or CableCARDs will be provided by your local cable service provider after a proper subscription process.

The provided CableCARD from your local cable service provider needs to be inserted into the CableCARD slot of a Digital Cable Ready TV. Please refer to page 24 for how to insert the CableCARD. A digital set-top box which used to be provided by the cable service provider is no longer needed with Digital Cable Ready TVs and CableCARDs.

When CableCARD is inserted into the slot, the TV screen will show the message that CableCARD is inserted and tries to download necessary data such as channel information or subscription information from your digital cable service provider. When you insert CableCARD for the first time, this process could take few minutes depending on the amount of data your cable provider needs to send. During this process the digital cable service provider or CableCARD may display messages on the TV screen to help or give you further information.

Please contact your local cable provider for more information on service availability and how to acquire a CableCARD.

NOTE

• This television receiver supports the copy protection system regulated by DTLA (Digital Transmission Licensing Administrator). It should be noted that copy protected content may not be viewable depending on your particular connections.

English - 4

Q&A

1. Is the antenna I use for existing TV reception good enough for DTV?

Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas. However, DTV broadcast channel assignments are different than analog channels. You should find out whether your local DTV broadcasts are on VHF (channels 2-13) or UHF (channels 14-69) to see if you need a different antenna.

If your DTV channels are on UHF and you already get good UHF reception, your present antenna may work fine. The same holds true for VHF DTV reception. Note that in some markets, both VHF and UHF channels are used for DTV broadcasts.

You can find out the latest DTV channel assignments for your area by browsing selected Internet web sites such as www.titantv.com, www.10000watts.com, and www.fcc.gov.

2. How difficult is it to receive DTV signals indoors?

This depends on whether your local DTV stations are running full power or not and how close your location is to the transmission tower. DTV receivers do not require as much signal as analog TV receivers to produce high-quality images and sound.

Once the DTV signal level exceeds a certain threshold at the receiver, the digital video and audio data is decoded at the same quality it was originally encoded for broadcast. This is a big advantage for DTV over analog TV - there is no noise, ghosting, static, or scratchy audio.

3. How can I connect an antenna in my townhouse, co-operative apartment, condominium, or apartment?

The Federal Communications Commission's OTARD Rule (part of the Telecommunications Act of 1996) allows residents of condominiums, townhouse, or members of neighborhood associations to put up outside antennas for reception of broadcast TV signals as long as those antennas are not located in common areas and are no more than 12' in height.

Residents of rental units (apartments, etc.) are not covered by the OTARD rules and will have to use indoor antennas to receive DTV broadcasts. It is possible that the landlord of an apartment complex can provide broadcast DTV signals via a master TV antenna system to each apartment.

4. Can I connect my DTV set-top receiver to my cable TV service?

Cable TV systems use a different method for transmitting digital TV programs that is currently incompatible with broadcast DTV set-top receivers. So you will still need to use an outdoor or indoor antenna to receive OTA broadcast DTV programs.

The good news is that you won't have to pay a monthly or per-program charge to watch OTA DTV and HDTV programs. They're free, unlike subscription satellite TV or premium cable TV. All you need is an antenna and a DTV set-top receiver to enjoy clear, sharp widescreen images and high-quality audio.

English - 5

Table of Contents

Your New Wide TV ..........................................................................................10

Viewing Position ..................................................................................................10

Replacing the Lamp..............................................................................................10

List of Features .....................................................................................................12

Accessories .........................................................................................................12

Front Panel Buttons...............................................................................................13

Front Panel Information Window............................................................................14

Rear Panel Jacks ..................................................................................................15

Remote Control ....................................................................................................16

Connections .....................................................................................................20

Connecting VHF and UHF Antennas.......................................................................20

Antennas with 75-ohm Round Leads...........................................................20

Connecting Cable TV ...........................................................................................21

Cable without a Cable Box .......................................................................21

Cable with a Cable Box that Descrambles All Channels ...............................21

Cable with a Cable Box that Descrambles Some (But Not All) Channels.........22

Connecting a VCR ...............................................................................................23

Connecting a VCR to the Video or S-Video/Audio jack ................................23

Connecting CableCARD .......................................................................................24

Connecting a Camcorder......................................................................................25

Connecting a DVD Player .....................................................................................26

Connecting to Y, PB, PR .............................................................................26

Connecting to Audio and Video Jacks ........................................................26

Connecting a DTV Set-Top Box ..............................................................................27

Connecting to Y, PB, PR .............................................................................27

Connecting to DVI (Digital Visual Interface) .................................................27

Connecting to HDMI (High Definition Multimedia Interface) ..........................28

Connecting a Digital Audio System ........................................................................29

Connecting to an Analog Amplifier ........................................................................29

Operation........................................................................................................32

Turning the TV On and Off....................................................................................32

Viewing the Menus and On-Screen Displays ...........................................................32

Selecting a Menu Language ..................................................................................33

Memorizing the Channels .....................................................................................34

Adding and Erasing Channels...............................................................................36

Changing Channels..............................................................................................37

Customizing Your Remote Control ..........................................................................38

Remote Control Codes..........................................................................................39

Setting the Clock..................................................................................................40

Setting the On/Off Timer ......................................................................................42

Setting the Sleep Timer .........................................................................................43

Viewing an External Signal Source ........................................................................44

Assigning Names to External Input Mode ...............................................................45

English - 6

Channel Control ...............................................................................................48

Selecting Your Favorite Channels ...........................................................................48

Labeling the Channels ..........................................................................................49

Fine Tuning Analog Channels .....................................................................50

Checking the Digital-Signal Strength ............................................................51

Analog

Digital

LNA (Low Noise Amplifier)....................................................................................52

Picture Control..................................................................................................54

Picture Control .....................................................................................................54

Selecting the Color Tone .......................................................................................56

Changing the Picture Size.....................................................................................57

Digital Noise Reduction ........................................................................................58

DNIeTM(Digital Natural Image engine) ...........................................................59

Setting the My Color Control Mode........................................................................60

Using the Color Weakness Enhancement Feature .....................................................62

Setting the Film Mode...........................................................................................63

Viewing Picture-In-Picture.......................................................................................64

Selecting the Sound Source ...................................................................................70

Freezing the Picture..............................................................................................71

Setting the Blue Screen Mode................................................................................72

Sound Control ..................................................................................................74

Sound Control .....................................................................................................74

Setting the SRS TSXT.............................................................................................76

Auto Volume ........................................................................................................77

Choosing a Multi-Channel Sound (MTS) track ...............................................78

Choosing a Multi-Channel Sound (MTS) track ...............................................79

Choosing a Digital Sound Format ................................................................80

Digital

Selecting the Internal Mute ....................................................................................81

Setting the On/Off Melody ...................................................................................82

Digital

Analog

Special Features ...............................................................................................84

Setting the Function Help ......................................................................................84

Menu Transparency Level......................................................................................85

Using the V-Chip..................................................................................................86

Viewing Closed Captions (On-Screen Text Messages) ....................................92

Viewing Closed Captions (On-Screen Text Messages) ....................................94

Analog

Digital

Using the CableCARD ..........................................................................................96

Using the CableCARD Setup Function.....................................................................97

Using the Guide...................................................................................................99

Appendix......................................................................................................102

Troubleshooting .................................................................................................102

Cleaning and Maintaining Your TV ......................................................................103

Using Your TV in Another Country........................................................................103

Specifications ....................................................................................................103

English - 7

SAMSUNG

Your New Wide TV

Viewing Position

To optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible.

When installing the product, make sure to keep it away from the wall (more than 10cm /4 inches) for ventilation purposes.

• Poor ventilation may cause

an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance.

Replacing the Lamp

•Why do I need to replace the lamp?

The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new.

• When do I need to replace it?

This should be replaced when the screen becomes darker, less clear or the icon appears.

• Check before lamp replacement

1. The lamp must be the same code number and type.

2. The lamp type is indicated on the left side of the TV. It is also indicated on the lamp case.

3. After checking the code number for the lamp, give the code number to the store where you purchased the TV or to a Samsung Service center.

• Caution

1. Replace with the correct code numbered lamp to avoid damage to the TV.

2. Turn the power off and wait for 30 minutes before replacing the lamp as it will be hot.

3. Do not touch the glass part of the lamp with your bare hands nor insert any foreign object inside the cover as it may cause poor screen quality, electric shock or fire.

4. Do not place the old lamp near flammable objects or within the reach of children.

5. Be sure to connect this TV directly to an AC wall outlet. If the TV's AC plug is connected to a cable box or other source, it will not allow for proper cool down time.

English - 10

• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.

Unplug TV, then use a

screwdriver to remove the screws.

Open the Lamp cover.

Remove the 2 press-pin

screws securing the Lamp.

Separate the Lamp from the

engine by holding the handle and pulling it out.

To reinstall the Lamp, follow

these steps in reverse order.

NOTES

• Be sure the replacement Lamp is the same type.

• After replacing the lamp, align the lamp cover with the groove and secure the screws.

• The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective circuit).

English - 11

Your New Wide TV

List of Features

Your TV was designed and engineered using the latest technology. It is a full-featured, high-performance unit that exceeds industry standards. In addition, it has these special features:

• Easy-to-operate remote control

• Easy-to-use on-screen menu system you can access from the front panel or remote control

• Automatic timer to turn the TV on and off at any time you choose

• Adjustable picture and sound settings and the ability to memorize your favorite settings

• Automatic channel tuning for up to 181 channels

• A special filter to reduce or eliminate reception problems

• Fine tuning control for the sharpest picture possible

• A built-in multi-channel sound decoder for stereo and bilingual listening

• Built-in, dual channel speakers

• A special sleep timer

• Picture-in-Picture capability that let you watch two channels at once

• Widescreen TV with adjustable image size

• Life-like clear images provided by DNle technology

• My Color Control Mode for corresponding with your color style

• Color weakness Mode

• Digital Input (HDMI/DVI IN) jack

• Digital Audio Output (OPTICAL) jack

• AV network system (Anynet) that enables you to easily control Samsung audio-video(AV) devices from this TV.

• CableCARD slot

Accessories

Once you have unpacked your TV, check to make sure that you have all the parts shown here. If any piece is missing or broken, call your dealer.

(BP59-00076A)/

English - 12

Remote Control

Registration Card (1)

AAA Batteries

Instruction Manual/

Safety Guide/

Quick Guide/

Anynet Manual/

Manual Guide

Anynet CableWarranty Cards (2)/

Front Panel Buttons

The buttons on the front panel control your TV’s basic features, including the on-screen menu system. To use the more advanced features, you must use the remote control.

Standby state.

(Standby indicator; Red)

Press and hold the POWER button for a few seconds to

turn the TV on or off.

Press to lower or raise the volume and to select items

when using the on-screen menu.

Press to see the on-screen menu.

NOTE

•Touching the control panel using

your finger will cause Blue LEDs to light for all buttons. You can then locate the desired button and touch it to operate.

Auto timer on has been set. (Timer indicator)

Press to switch between viewing TV programs and signals from connected components.

Press to change channels and to move between items on the on-screen menu.

Press to activate (or change) a particular item.

Aim the remote control towards this spot on the TV.

English - 13

Your New Wide TV

Front Panel Information Window

The Information window appears as illustrated above while the TV is turning on. (Refer to the TV set’s display for animation details.) When successfully turned on, an animated “Smile” figure appears and then fades out slowly.

Appears while the TV is turning off.

When these indicators appear, there is a possible problem with the TV.

Lamp or other component may be defective. Please contact a certified technician.

Check if the ventilation hole on the rear of the set is blocked, because if the inner temperature is too high, the power will shut off.

A cooling fan inside the set is not operating normally.

The TV’s rear cover is not properly shut.

NOTES

• It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.

• The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working.

English - 14

Rear Panel Jacks

Use the rear panel jacks to connect components such as a VCR. You can connect different components such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and two set of component video input jacks on the rear panel of your TV. For more information, please see “Connections”.

ANTENNA terminals

Two independent cables or antennas can be connected to these terminals. Use “ANT 1 IN (CABLE)” and “ANT 2 IN (AIR)” terminals to receive a signal from VHF/UHF antennas or your cable system. (Refer to pages 20~22)

Component1, 2 jacks (Y, PB, PR, L, R)

Use these jacks to connect the component video/audio signals from a DVD player or a set-top box. (Refer to pages 26~27)

VIDEO/AUDIO OUTPUT jacks

Sends video/audio signal from the TV to an external source, such as a VCR. These jacks are available only in RF, Video and S-Video modes.

S-VIDEO INPUT jacks

Connects an S-Video signal from an S-VHS VCR or DVD player. (Refer to page 25)

VIDEO/AUDIO INPUT jacks

Connect video/audio signals from external sources, such as VCR or DVD players. (Refer to page 23 and 26)

DVI (Digital Visual Interface) AUDIO INPUT jacks

Connect to the digital audio output jacks of a device with DVI output. (Refer to page 27)

∏

DIGITAL AUDIO OUT(OPTICAL) jack

Connect to a Digital Audio Component. (Refer to page 29)

”

Anynet

Please refer to the Anynet Owner’s Instruction. This jack is for connecting to other Samsung Anynet-enabled devices.

’

HDMI (High Definition Multimedia Interface)/ DVI INPUT jack

Connect to the HDMI jack of a device with HDMI output. Connect to the digital video output jack for device with DVI output. (Refer to pages 27~28)

CableCARD

Insert the CableCARD into the slot. (Refer to page 24)

SERVICE

This jack is for software upgrades.

English - 15

Your New Wide TV

Remote Control

You can use your remote control within a distance of 23 feet and an angle of 30 degrees from the left and right sides of the TV’s remote control receiver. You can also use your remote control to operate your VCR, Cable box, DVD player or some Samsung Set-top boxes. See pages 38~39 for details.

1. POWER

Turns the TV on and off.

2. P.MODE

Adjust the TV picture by selecting one of the preset factory settings (or select your personal, customized picture settings.)

3. ANTENNA

Press to select “AIR” or “CABLE”.

4. CHANNEL NUMBER

Press to directly tune to a particular channel.

Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “-” and “3”.

6. VOL +, VOL

Press to increase or decrease the volume.

7. MUTE

Press to mute the TV sound.

8. ANYNET

Runs the Anynet view functions and sets up Anynet devices. Please refer to the Anynet Owner’s Instruction.

9. MENU

Displays the main on-screen menu.

10. CH.LIST

Displays the channel list.

11. FAV.CH (Favorite Channel)

Press to switch between your favorite channels.

12. MODE

Selects a target device to be controlled by the Samsung remote control (i.e., TV, STB, VCR, CABLE, or DVD).

13. PRE-CH

Tunes to the previous channel.

14. SOURCE

Press to display all of the available video sources (i.e., TV, Set-Top box, VCR, DVD, DTV).

15. CH /

Press to change channels. Moves from one set of screen information to the next in TV Guide menu.

16. INFO

Press to display information on the TV screen.

17. EXIT

Press to exit the menu.

18. ▲, ▼, œ, √, ENTER

Press to select highlight up, down, left, or right. While using the on-screen menus, press the ENTER to activate (or change) a particular item.

19. MTS (Multichannel Television Stereo)

Press to choose Stereo, Mono or SAP (Secondary Audio Program).

20. PIP (Picture In Picture)

Displays the available channels in sequence. (These buttons change channels in the PIP window only.)

21. STILL

Press to pause the current screen.

22. ASPECT

Press to change the screen size.

23. SRS

Activates TruSurround.

24. DNIe (Digital Natural Image engine)

Activates DNIe.

25. SET

Used during set up of this remote control, so that it will work compatibly with other devices (some Samsung Set-top boxes, VCR, Cable box, DVD, etc.)

26. SLEEP

Press to select a preset time interval for automatic shut off.

27. PIP Controls

CH / ; Press to display the available

channels in sequence. (These buttons change channels in the PIP window only.)

28. CAPTION

Controls the caption decoder.

29. VCR/DVD Controls

Controls VCR or DVD functions: Rewind, Stop, Play/Pause, Fast Forward.

30. RESET

If your remote control is not functioning properly, take out the batteries and press the reset button for about 2~3 seconds. Re-insert the batteries and try using the remote control again.

English - 16

Installing Batteries in the Remote Control

With normal use, the batteries in the remote control should last about a year. If you notice a performance degradation while using the remote, the batteries may need to be replaced. Make sure you replace both batteries and do not mix old and new batteries in the remote control. If you won’t be using the remote control for a long time, remove the batteries and store them in a cool dry place.

Slide the back cover all the way out to open the battery compartment of

the remote control.

Install two AAA size batteries.

Make sure to match the “+” and

“–” ends of the batteries with the diagram inside the compartment.

Slide the cover back into place.

NOTE

• Do not mix battery types, i.e, alkaline and manganese.

English - 17

SAMSUNG

Connections

Connecting VHF and UHF Antennas

If you do not have a cable system, you will need to connect an antenna to your TV.

Antennas with 75-ohm Round Leads

If your antenna looks like this: it has 75-ohm round leads.

Plug the antenna lead into the

ANT 2 IN (AIR) on the rear

panel of your TV.

English - 20

Connecting Cable TV

You can connect different cable systems to your TV, including cable without a Cable box, and cable with a Cable box that descrambles some or all channels.

Cable without a Cable Box

If you want to connect cable, and you do not need to use a cable box:

Plug the incoming cable into the ANT 1 IN (CABLE)

on the rear panel of your TV.

Cable with a Cable Box that Descrambles All Channels

Find the cable connected to the ANTENNA OUT

terminal on your Cable box. This terminal might be labeled “ANT OUT”, “VHF OUT” or simply “OUT”.

Cable Box

Connect the other end of

the cable to the “ANT 1

IN (CABLE)” terminal on the rear panel of your TV.

English - 21

Connections

Cable with a Cable Box that Descrambles Some (But Not All) Channels

To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial cables (which you can buy from your Samsung dealer or any electronics store).

Find and disconnect the cable that is connected to

the ANTENNA IN terminal of your Splitter. This terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”. Connect this cable to a two-way splitter.

Connect a coaxial cable between an OUT terminal

of the splitter and the IN terminal of the Cable box.

Connect a coaxial cable between the ANTENNA

OUT terminal of the Cable box and the B-IN terminal of the RF (A/B) switch.

Connect a coaxial cable between the other OUT

terminal of the Cable box and the A-IN terminal of the RF (A/B) switch.

Connect the last coaxial cable between the OUT

terminal of the RF (A/B) switch and the ANT 1 IN (CABLE) on the TV.

After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your Set-Top Box to the Cable box's output channel, which is usually channel 3 or 4.)

English - 22

Connecting a VCR

Connecting a VCR to the Video or S-Video/Audio jack

Connect the Video/Audio cables between the VIDEO

or S-VIDEO/AUDIO input jacks on the TV and VIDEO or S-VIDEO/AUDIO output jacks on the VCR.

Connect a coaxial cable between the Antenna out

terminal (i.e., “OUT to TV”) on the VCR and the ANT 1 IN (CABLE) on the TV.

Connect a video cable between the S-VIDEO IN

jack on the TV and the S-VIDEO OUT jack on the VCR.

TV Rear Panel Stereo VCR

Incoming Cable or Antenna

NOTES

• For better video, use an S-Video cable.

• Please be sure to match the color coded input terminals and cable jacks.

English - 23

Connections

Connecting CableCARD

You must obtain a CableCARD from a local cable service provider.

Insert the CableCARD into

the “CableCARD” slot and

the message “CableCARD Inserted” is displayed on the screen. If the channel information does not already exist, the message “Updating Channel List” is displayed during channel information configuration.

The pairing information

containing a telephone

number, CableCARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your Service Provider.

Incoming Cable or Antenna

TV Rear Panel

Please insert the card as shown.

English - 24

When channel information

configuration is finished, the

message “Updating Completed” is displayed. It indicates that the channel list is now updated.

Connecting a Camcorder

You can use your camcorder to view tapes without using a VCR.

Locate the A/V output jacks on the camcorder. They are

usually found on the side or back of the camcorder.

Connect a set of audio

cables between the AUDIO

IN jacks on the TV and the AUDIO OUT jacks on the camcorder. If you have a mono Camcorder, connect L(mono) to the Camcorder audio out using only one audio cable.

Connect a video cable

between the VIDEO IN (or

S-VIDEO IN) jack on the TV and the VIDEO OUT jack on the Camcorder. The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your Camcorder is stereo, you need to connect a set of two cables.

Camcorder

TV Rear Panel

Camcorder Output Jacks

English - 25

Connections

Connecting a DVD Player

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

Connecting to Y, PB, PR

Connect a set of audio

cables between the

COMPONENT (1 or 2) AUDIO (L, R) IN jacks on the TV and the AUDIO OUT jacks on the DVD player.

To enable Component video

viewing, connect a set of

video cables between the COMPONENT (1 or 2) VIDEO (Y, PB, PR) IN jacks on the TV and VIDEO (Y/PB/PRor Y/CB/CR) OUT jacks on the DVD player.

TV Rear Panel

DVD Player

Note: For an explanation of Component video, see your DVD player's owner's manual.

Connecting to Audio and Video Jacks

Connect a set of audio

cables between the AUDIO

IN (1 or 2) jacks on the TV and the AUDIO OUT jacks on the DVD player.

Connect a video cable

between the VIDEO IN (1

or 2) jack on the TV and the VIDEO OUT jack on the DVD player.

Incoming Cable or Antenna

TV Rear Panel

DVD Player

Incoming Cable or Antenna

English - 26

Connecting a DTV Set-Top Box

Connecting to Y, PB, PR

Connect a set of audio cables between the

COMPONENT (1 or 2) AUDIO (L, R) IN jacks on the TV and the AUDIO OUT jacks on the Set-Top Box.

Connect a set of video

cables between the

COMPONENT (1 or 2) VIDEO (Y, PB, PR) IN jacks on the TV and VIDEO (Y/PB/PRor Y/CB/CR) OUT jacks on the Set-Top Box. Note: For an explanation of Component video, see your Set-Top Box owner's manual.

Incoming Cable or Antenna

TV Rear Panel DTV Set-Top Box

Connecting to DVI (Digital Visual Interface)

Connect a set of audio cables between the DVI

AUDIO (L, R) IN jacks on the TV and the AUDIO OUT jacks on the Set-Top Box.

Connect an HDMI/DVI

video cable between the

HDMI/DVI IN jack on the TV and the DVI OUT jack on the Set-Top Box.

NOTE

• Requires a Cable Converter.

TV Rear Panel

Incoming Cable or Antenna

DTV Set-Top Box

English - 27

Connections

Connecting to HDMI (High Definition Multimedia Interface)

Connect an HDMI cable

between the HDMI/DVI IN

jack on the TV and the HDMI OUT jack on the Set-Top Box.

NOTE

• Make sure the HDMI/DVI source's power is on, or you will be unable to select it in the menu's source list.

TV Rear Panel

Incoming Cable or Antenna

DTV Set-Top Box

English - 28

Connecting a Digital Audio System

There are many types of digital audio systems on the market today. A simplified illustration of an audio system is shown below. For more information, see your audio system owner’s manual.

If your audio system has a optical digital audio input,

connect to the “DIGITAL AUDIO OUT(OPTICAL)” jack on the TV.

NOTE

• OPTICAL: converts the electric signal into an optical light signal, and transmits it through glass fibers. A transmission system of digital audio in the form of a light wave, S/PDIF format using a glass conductor. See page 80 to set the digital output format (Dolby Digital or PCM) appropriate to you digital audio component.

Connecting to an Analog Amplifier

TV Rear Panel

Audio System

The “AUDIO OUT” terminals cannot be used for external

speakers. You must hook them up to an amplifier. When an audio amplifier is connected to the “AUDIO OUT” terminals: Decrease the gain (volume) of the audio amplifier, and adjust the volume level with the volume control on the TV.

TV Rear Panel

Amplifier

English - 29

SAMSUNG

+ 74 hidden pages

Samsung HL-R5687W User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual