Samsung HG65AC890, HG65AC895, HG55AC895, HG46AC895, HG46AC890 User Manual

...
LED TV
Installation manual
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/register
Model Serial No.
Instruction
This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer-controlled system for hotels and other hospitality businesses. Interactive : When the TV is powered-up initially, it sends a command to identify the SBB/STB; if identified, theTV switches to ONLINE mode and full control is through the SBB/STB. If the TV is in ONLINE mode, it stops receiving IR(Samsung remote) commands and acts according to interface protocol. Stand-Alone: If SBB/STB is not identified, the TV should be switched to STAND-ALONE mode with restricted operation.
Operational Modes
When this TV (in Hotel mode) is operated with a SBB/STB, it is in one of two states :
• ONLINE or STAND-ALONE. In the STAND-ALONE state, the TV will act as a Hotel TV, but without active communication. This is to prevent guests from trying to cheat the system by disconnecting the SBB/STB.
Power
ON
Hotel Mode On
Hotel TV
SBB/STB Online if
one success within 10
attempts
SBB/STB Online-10
consecutive
fails
Stand-alone
Mode
SBB/STB Status­Attempt every 2secs
Online Mode
Poll Rate 20/sec
To set the details for Stand-alone or interactive mode, refer to pages 20-23(Setting the hotel option data : Stand-alone mode and Interactive mode)
• Some operations may be restricted to prevents guests from "cheating" the TV system.
• No main menu(Interactive mode) or Channel Menu, Plug & Play in Main Menu (Stand-Alone mode)
• Limited Volume and Panel key lock or unlock
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV Program logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause uneven wear of screen phosphor, which will affect image quality. To reduce risk of this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try do display any image on full screen, use TV set picture format menu for best possible match.
• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.
• Frequently use all TV features designed to reduce image retention and screen burnout. Refer to the relevant user manual section for details.
Securing the Installation Space
Keep required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
Using parts provided by another manufacturer may result in a problem with the product or injuries due to the product falling.
x
The appearance may differ, depending on the product.
Installation with a stand. Installation with a wall-mount.
10 cm
10 cm
10 cm10 cm
10 cm
10 cm10 cm
Contents
y Instruction ................................................................................................................................................................. 2
y Operational Modes ................................................................................................................................................... 2
y Still image warning .................................................................................................................................................... 2
y Securing the Installation Space ................................................................................................................................. 2
y Accessories .............................................................................................................................................................. 4
y Installing the LED TV Stand ....................................................................................................................................... 5
y Viewing the Connection Panel ................................................................................................................................... 6
y TV Controller ............................................................................................................................................................. 8
y Samsung Smart Control ............................................................................................................................................ 9
y Viewing the Remote Control .................................................................................................................................... 12
y Connecting the TV with SBB ................................................................................................................................... 13
y Connecting the Bathroom Speakers ....................................................................................................................... 15
y Connecting the MediaHub HD ................................................................................................................................ 17
y Connecting the RJP (Remote Jack Pack) ................................................................................................................ 18
y .
Setting the Hotel Option Data ................................................................................................................................ 20
y Installing the Wall Mount ......................................................................................................................................... 58
y Securing the TV to the Wall ..................................................................................................................................... 59
y Anti-theft Kensington Lock ...................................................................................................................................... 60
y Specifications ......................................................................................................................................................... 61
y Dimensions ............................................................................................................................................................. 62
ENGLISH
English
3
Accessories
Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
The items’ colour and shapes may vary depending on the model.
y S
mart Touch Control & Batteries (AAA x 2) y Remote Control & Batteries (AAA x 2) y Quick Set up Guide
Cable Holder (2 EA)
The stand and stand screw may not be included, depending on the model.
The Data Cable may not be included, depending on the SI Vendor.
y Power Cord / Data Cable y Owner’s Instructions
Safety Guide (Not available in all locations)
4
English
Installing the LED TV Stand
Stand Components
When installing the stand, use the provided components and parts.
The stand shape of product may vary depending on the model.
A
B
C
yS
tand
1
A
C
yGuide Stand (2EA) yBracket Stand (2EA) yScrews
1-1
1-2
1-3
D
Tight the bottom of the screw first, and stow the
3
x8
(M4 X L14)
upper side of screw last.
D
x4
(M4 X L14)
C
x12 (M4 X L14)
2
2-32-1 2-2
✎ Place a soft cloth over the table to protect the TV, and then place
the TV on the cloth screen-side down. ✎ Insert the Stand Guide into the slot on the bottom of the TV. ✎ Slide and assemble it to the end line in the direction of arrow.
When the declination happened, try reassemble
4
it 2 category.
B
✎ Make sure to assembling stand guide attached on the TV.
3-1 3-2
NOTE
y Make sure to distinguish between the front and back of each component when assembling them. y Make sure that at least two persons lift and move the TV.
English
5
1
Viewing the Connection Panel
# @
2
3
5 6
3
7 0
8
4
9
Whenever you connect an external device to your T V, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1 AV IN
– Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on an
A/V device. – Connects Component video / audio. – Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of the TV set and the other ends to
corresponding audio out jacks on the external device. – When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (Green) does not match the color of the video
cable (Yellow).
2 USB (5V 0.5A)
USB (HDD/1.0A) / CLONING
– Connector for software upgrades and Media Play, etc. – Service connection.
3 HDMI IN 1, 2(DVI), 3(ARC): Connects to the HDMI jack of a device with an HDMI output.
✎ No sound connection is needed for an HDMI-HDMI connection. HDMI connections carry both audio and video. ✎ Use the HDMI IN 2(DVI) jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio.
4 ANT IN (AIR/CABLE)
– To view television channels correctly, the TV must receive a signal from one of the following sources: – An outdoor antenna / A cable television system
!
6
English
5 HEADPHONE JACK:
– Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the sound
from the built-in speakers is disabled.
6 HP-ID : Connect the cable to HP-ID and Headphone Jack simultaneously and connect it to separated Headphone Box.
See page 16. When connecting Headphone to Headphone Box, it works same as Headphone function.
Display Modes
You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the resolution you choose.
After connecting a computer to the TV, set the screen resolution for the TV on the computer. The optimal resolution is 1920 x 1080 @ 60 Hz. If it is set to any other than in the table below, the TV may display nothing. Set the resolution properly, referring to the user guide of the computer or its graphic card.
The resolutions in the table are recommended.
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode Resolution
IBM 720 x 400 31.469 70.087 28.322 -/+
MAC
VESA DMT
640 x 480 832 x 624
1152 x 870
640 x 480 640 x 480 640 x 480 800 x 600 800 x 600
800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864
1280 x 1024 1280 x 1024
1280 x 720 1280 x 800 1280 x 960 1366 x 768 1440 x 900
1600 x 900RB
1680 x 1050 1920 x 1080
Horizontal Frequency
(KHz)
35.000
49.726
68.681
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
60.000
47.712
55.935
60.000
65.290
67.500
Vertical Frequency
(Hz)
66.667
74.551
75.062
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
60.000
60.015
59.887
60.000
59.954
60.000
Pixel Clock Frequency
(MHz)
30.240
57.284
100.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
108.000
85.500
106.500
108.000
146.250
148.500
Sync Polarity
(H / V)
-/-
-/-
-/-
-/-
-/-
-/­+/+ +/+ +/+
-/-
-/­+/+ +/+ +/+ +/+ +/+
-/+ +/+ +/+
-/+ +/+
-/+ +/+
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 (DVI) jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
7 RJP: This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional
modules to improve device use and convenience.
8 PC/ DVI AUDIO IN: Connects to the audio input jacks on an Amplifier/Home Theater. 9
VOL-CTRL: Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOLCTRL port.
0 VARIABLE AUDIO OUT: Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the
Variable port (RCA).
! DATA
– Used to support data communication between the TV and the SBB. – Connects using RJ-12 TV type plugs.
@ PC IN: Connect to the video output jack on your computer. # LAN: Connect to a wired LAN using CAT 7 cable.
English
7
TV Controller
TV Controller is a multi directional button that helps navigate without using the remote control.
Some functions which require a PIN code may not be available.
The product colour and shape may vary, depending on the model.
Exits the menu when pressing the controller for more than 1 second.
When selecting the function by moving the controller to the up/down/lef t/right directions, do not press the controller. If the controller is used first, you cannot operate it to move the up/down/left /right directions.
mR
P
Function menu
TV Controller
The image is drawn by facing the front
Remote control sensor
When you use the Samsung Smart Control, the standby LED does not work (except the P button).
Power on Turn the TV on by pressing the controller in standby mode.
Adjusting the volume Adjust the volume by moving the controller from side to side when the power is on.
Selecting a channel Select a channel by moving the controller up and down when the power is on.
Using the function menu Press the controller when the power is on and the function menu appears. If you press it again, the
Using the Menu
Selecting the Source
Selecting the SMART HUB ( ) With the Function menu visible, select SMART HUB () by moving the Controller upwards. The
Power Off
function menu screen disappears.
Selects the MENU(m) by moving the controller in the function menu screen. The OSD(On Screen Display) of your TV’s feature appears.
Selects the Source(s) by moving the controller in the function menu screen. The Source list screen appears.
SMART HUB main screen appears. Select an application by moving the Controller, and then pressing the Controller.
Selects the Power Off(P) to turn the TV off by moving the controller in the function menu screen.
side of the TV.
To close the Menu, SMART HUB, or Source, press the Controller for more than 1 second.
Standby mode
Do not leave your TV in standby mode for long periods of time a small amount of electric power is still consumed even when the power button is such as when on holiday. off. It is best to unplug the power cord.
English
8
Samsung Smart Control
Colours and shape may vary depending on the model.
Turns the TV on/off.
Press this button to use the search window.
¢
: Turns the sound on/off.
AD: Press and hold this
button to bring up the
Accessibility Shortcuts
panel. Select the options to
turn them on or off.
- Touchpad: Place a finger on the touch pad
and move the Samsung Smart Control.
The pointer on the screen moves in the
direction and as much as the Samsung
Smart Control is moved. Press the
touchpad to run the focused item.
-< > ¡ £: Moves the pointer or focus.
( Not available )
Changes the volume.
With the virtual remote control on the screen, you can easily enter digits, control content, and use functions.
Changes the source.
Starts voice recognition. When the microphone icon appears on the screen, say a voice command into the microphone. Say " learn about basic usage and voice commands.
- Say a voice command 10cm to 15cm from the microphone and at an ap­propriate volume.
Changes the channel.
GUIDE: Displays the digital channel
broadcasting schedule.
CH.LIST: Press and hold to launch the
Channel List
.
Help
" to
RETURN: Returns to the previous menu.
Additionally, when you press this button while
watching TV, you can return to the previous
EXIT: Press and hold this button to exit all
Use these buttons with specific features. Use
these buttons according to the directions on the
:
Enable Football Mode for an optimal sports
currently running applications.
viewing experience.
channel.
TV screen.
Launches Smart Hub. Pressing SMART HUB while an application is running terminates the application.
Colour buttons: Use these colour buttons to access additional options specific to the feature in use.
- MENU: Press and hold to display a menu on the screen.
- REC: Press and hold to record the broadcast.
- INFO: Press and hold to view infor ma­tion about the current digital channel or media file.
M.SCREEN: You can split the TV screen and
use various functions such as watching TV, surfing the web, watching video, and so on. For more information, refer to the e-Manual.
English
9
Inserting Batteries into Samsung Smart Control
To use Samsung Smart Control, first refer to the figure below and insert batteries into the unit.
1. Gently pull on the battery cover's notch and then remove the cover completely once it comes loose.
2. Insert 2 AA alkaline batteries, making sure to align the positive and negative polarities correctly.
3. Place the battery cover on the remote control and insert the top part of the cover into the remote control.
4. Press the catches on both sides of the battery cover in the order shown so that the cover is completely attached to the
remote control.
¦ Using the Samsung Smart Control
Samsung Smart Control makes it even easier and more convenient to use the TV. Pressing the KEYPAD button displays a virtual remote control that allows you to easily enter digits, control content, and activate functions on the screen.
- We recommend using Samsung Smart Control at a distance of less than 6m. A usable distance may differ depending on the wireless environmental conditions.
Pairing the Samsung Smart Control
To control the TV with Samsung Smart Control, you need to pair Samsung Smart Control to the TV via Bluetooth. Pair Samsung Smart Control to the TV.
- Samsung Smart Control can only be paired to a single TV.
Point Samsung Smart Control at the remote control sensor of the TV and press the TV button to turn the TV on.
- Remote control receiver’s location may vary depending on the model.
Reconnecting Samsung Smart Control
If the Samsung Smart Control stops operating or works abnormally, replace the batteries as this may be due to insufficient battery power.
If the problem persists, the Samsung Smart Control restores pairing with the TV.
1. Press RETURN button and GUIDE button simultaneously for 3 seconds.
- You must place the Samsung Smart Control approximately 30cm ~ 40cm away from the TV and ensure it is pointing towards the remote control receiver.
2. Connection image is appeared on the screen. And then, Samsung Smart Control is connecting to TV automatically.
English
10
When you see this alarm icon on the screen...
Following alarm icon indicates Samsung Smart Control's batteries are low. If the alarm icon pops up, replace the batteries. Samsung recommends using alkaline batteries for a longer operating life.
<Low battery Alarm Icon>
Using the TV by Moving the Samsung Smart Control
The Samsung Smart Control has a motion sensor (gyro sensor) that allows you to easily control the TV by holding and moving the Samsung Smart Control.
After placing a finger on the touchpad, a pointer appears on the screen. Hold and move the Samsung Smart Control. The pointer moves the same way the Samsung Smart Control is moved. It's also possible to scroll up and down on scrollable screens.
- If you remove the finger from touchpad, the screen pointer disappears.
Using the TV with the Touchpad
- Navigate to the Support menu and select the Smart Control Tutorial option to learn how to use the touchpad, following the on screen instructions.
Moving the Focus/Pointer
Press the directional buttons (up, down, left, and right) to move the pointer or focus in the direction.
Menu Access & Item Selection
Press the touchpad. This lets you access a TV menu or select an item.
Displaying the Context-sensitive Menu on Smart Hub
Press and hold on the touch pad from the Smart Hub screen. The Options menu available to the selected item appears.
- The Options menu depends on the context.
Moving to the Smart Hub panel
On the Smart Hub screen, drag left or right on the touchpad. This will move the Smart hub panels left or right.
Scrolling on the Web Browser
Drag up/down on the touchpad in the web browser screen. This scrolls through the web screen.
English
11
Viewing the Remote Control
✎ This remote control has Braille points on the
impaired persons.
Power, Channel
, and
Volume
buttons and can be used by visually
Turns the TV on and off.
Have direct access to channels.
Alternately selects Teletext, Double or Mix.
Adjust the volume.
Display channel list on the screen.
Display the main on-screen menu.
Quickly select frequently used functions.
Select on-screen menu items and
Buttons in the Channel List, Contents
Enter the hour your want the TV to
ALARM: Enter the hour you want the TV
W
: Turns the 3D image on or off. ( Not
SUBT.: Displays digital subtitles.
change menu values.
Return to the previous menu.
Home menu, etc.
turn on.
to turn on.
available )
' : Stop.
TTX/MIX
GUIDE
CH LIST
HOME
CONTENT
CLOCK
AB CD
ALARM
SUBT.
Display and select available video sources.
Electronic Programme Guide (EPG) display.
Cut off the sound temporarily.
Change channels.
Switch to the home Screen.
View the Contents Home.
Press to display information on the TV screen.
CLOCK: When you press INFO key
in standby mode, TV screen displays the time.
Exit the menu.
Use these buttons in the Contents
Home.
12
English
Installing the batteries (Battery size: AAA)
X
Y
Z
NOTE
• Use the remote control within 7m of the TV.
• Bright lights may affect the performance of the remote control. Avoid using the remote control near special fluorescent lights or neon signs.
Connecting the TV with SBB
ETH MODEM
1. Connect the DATA jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable.
Use data communication.
DATA Cab l e
TV Rear Panel
English
13
¦ List of Vendors and Compatible Data Cables Supplied with the TV
y Confirm that you are using the correct data cable for your vendor. Refer to the code label on the data cables.
14
English
Connecting the Bathroom Speakers
You can connect the Bathroom Speakers using the following method.
¦ Connecting through the Variable Output (available without an external amplifier)
TV Rear Panel
1
2
VOL+
VOL
Speaker
-
Volume Control Box
1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel.
Speaker +
Speaker -
N/C
2. Connect the VOL-CTRL jack of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel.
The maximum speaker output is 4W, 8Ω.
The VARIABLE AUDIO OUT port supports MONO sound out only.
y Installing the Volume Control
– If you configure the Volume Control Box as shown in the figure, you can control the volume of the bathroom speakers. – The jack that connects the Volume Control Box to the TV is a 3.5mm normal Phone jack. – Volume Control Box switch is a Tact switch.
Setting the Sub AMP Mode
0: Turns the Sub AMP function off (PWM off). – 1: Determines the Sub volume according to the main volume control. the sub volume is determined according to the
Power On Volume, the Min Volume, and the Max Volume values of Hotel Mode.
2: Determines the volume according to the bathroom control panel setting.
y Variable Output Port Specifications
Speaker Wire: Use speaker cable no more than 82 feet (25m) in length.
VOL - DOWN
( White 1 )
VOL - UP
( Black /Red 2 )
GND ( Shield Wire 3 )
Volume Control Box
1
3
2
VOL +
VOL
-
English
15
¦ Audio Loop In
An additional Headphone Box can be installed on a bed or business desk for added convenience. The installation procedures are given below.
y Detailed Drawing of the Headphone Box.
TV Rear Panel
Headphone Box
HEADPHON BOX
TV HP-ID jack
Shield wire
Red Wire (Audio-R)
Red wire + White wire
TV Headphones jack
Whitewire (Audio-L)
Shield Wire
<Headphone Box>
16
English
Connecting the MediaHub HD
Output to any external source connected to MediaHub HD on the hotel desk.
MediaHub HD Rear
USB RS/232
HDMI
1
RS-232 Data Cable
TV Rear Panel
2 HDMI cable
1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD.
2. Connect the HDMI IN 1, 2(DVI) or 3(ARC) port of the TV and the HDMI port of the MediaHub HD.
y MediaHub HD
– The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB)
and corresponding outputs. The corresponding output sources connect from MediaHub to the TV. MediaHub communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an external source to the MediaHub. MediaHub communicates with the TV by sending messages regarding Active/Inactive sources. The TV switches to the Active external source.
– You have to connect the HDMI of the MediaHub to the HDMI IN 2(DVI) port of the TV. – When the TV is on, connect the TV and the RJP within 10 seconds.
y Special features
– PIP – Auto Detection
English
17
Connecting the RJP (Remote Jack Pack)
Output to any external source connected to RJP on the hotel desk.
RJP Rear
USB HDMI VIDEO
AUDIO AUDIO/PC
4 HDMI cable
RS/232
3 Video Cable
2 Audio Cable
1
D-sub / PC Audio cable
5
TV Rear Panel
1. Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP.
2. Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the VIDEO port of the RJP.
3. Connect the AV IN [VIDEO] port of the TV to the VIDEO port of the RJP.
4. Connect the HDMI IN 1, 2(DVI) or 3 (ARC) port of the TV and the HDMI port of the RJP.
5. Connect the RJP port of the TV and the RS/232 port of the RJP.
The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-7660 (HD Plus).
y RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio
Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected from RJP to TV. The RJP communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/ Inactive sources. The TV will switch to the Active external source according to the priority set by the User.
You can select HDMI IN 1, 2(DVI) or 3(ARC) and AV IN for connecting RJP.
When the T V is on, connect the TV and the RJP within 10 seconds.
18
English
y The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10
seconds. All LEDs blink 5 times to acknowledge that this has been finished.
y The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The
LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart. If the guest then touches another source button, the TV will change to the selected source and the corresponding LED will be lit.
y After an RJP Reset or a TV Power OFF/ON, it takes approx. 10 seconds to establish communications between the TV and
the RJP.
y The following table shows the approximate time in seconds to switch from the TV to the input source, based on the
priority.
Scenario 1: When no inputs are connected.
Source To Connect
AV 2 Sec PC 0.7 Sec
HDMI 3.9 Sec
Scenario 2: When two or more inputs are connected and an Input source is disconnected and then reconnected.
Source Disconnect To Connect Total
AV 4.5 Sec 2 Sec 6.5 Sec PC 0.7 Sec 0.7 Sec 1.4 Sec
HDMI 3.9 Sec 3.9 Sec 7.8 Sec
E.g. If the RJP has all its live sources AV, PC and HDMI connected, AV is viewed as the highest priority. If the RJP is in HDMI mode, and a guest removes and reconnects the AV, the minimum time required to switch to the AV is 6.5 seconds.
y To connect audio (Ipod or Mp3), Music mode should be ON and Jack Ident detect should be OFF. y A/V, PC and HDMI input sources are supported.
English
19
.
Setting the Hotel Option Data
To Enter: Press the MUTE 1 1 9 ENTERE buttons in order. (From the Hospitality mode, the Standalone mode is set.) To Exit from this menu : power off and turn on again.
Depending on Model and Region, some menus do not exist on the TV set.
Hotel TV Function
Category Item initial value
Hospitality
Mode
SI Vendor SI Vendor OFF
Power On Power On Channel Last Saved
Power On
Channel
Hospitality Mode Standalone
Power On Channel Num 1 When the TV is turned on, it switches automatically to this channel.
Power On Channel Type AT V
Power On Volume Last Saved
Power On Volume Num 10 The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Min Volume 0 The minimum Volume Level the user can set in Stand Alone Hospitality mode.
Max Volume 100 The maximum Volume Level the user can set in Stand Alone Hospitality mode.
Power on Source TV Select the input source the TV displays when turns on.
Power On Option Last Option
Channel Setup
Channel Editor
Mixed Channel Map ON
Dynamic SI OFF
Select Hospitality mode.
• Interactive mode : TV works with an SI STB or SBB.
• Stand-alone mode : TV works alone, without an SI STB or SBB.
• Interactive mode : Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek /
Seachange / MDC / Innvne
• Standalone mode : Smoovie
Set the default values that will be applied when the TV is turned on.
• User Defined : Lets you set Power On Channel and Channel Type manually. See Power On Channel and Channel Type below.
• Last Saved : If you select this item, when the TV is turned on, it displays the chan­nel it was displaying when it was turned off.
Select channel band : AIR (analogue air band), DTV (digital air band), CATV (analogue cable band), CDTV (digital cable band)
• User Defined : Lets you set the Power On Volume manually. See Power On Volume below.
• Last Saved : When the TV is turned on, it returns to the volume that had been set when the power had been turned off.
Determines the TV's state when power returns after a power failure or after you have unplugged the TV and then plugged it in again.
• LAST OPTION : Returns to its last Power state. If it was in Stand-by, it returns to Stand-by. If it was on, it turns on.
• Power On : When the power returns, the TV turns on.
• Standby : When the power returns, the TV enters the Standby mode.
Gives you direct, immediate access to some of the Channel menu functions on the user Channel menu such as Auto Tuning, Antenna selection, etc.
The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor you can:
• Change the channel numbers and names, and sort the channels in your desired channel number order.
• Apply the video mute to channels you select. The video mute blanks out the video from a channel and outputs only the sound while displaying a speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily, without your having to display each channel directly.
This Feature enables showing/browsing all antenna type (Air/Cable or Satellite) channels at the same time.
• On: When ON, guests can access the complete Channel Map irrespective of the selected antenna type. The Channel list will also populate Air as well Cable type channels.
• Off: When OFF, guest can access the Channel Map corresponding to the selected antenna type [AIR/CABLE or Satellite] only. The Channel list/Editor will only show the selected antenna type channels.
• On : Check the DTV Programme channel number. (the TV channel editor is inac­cessible)
• Off: Do not check the DTV Programme channel number. (the DTV channel editor is accessible, but additional channel Programme number update is not supported)
Description
20
English
Loading...
+ 44 hidden pages