Samsung HG40ND470, HG24ND470, HG40ND477, HG32ND477, HG32ND470 User Manual

Quick Setup Guide

435 6

3 5

Configure your TV

Picture Mode Standard

Choose a picture mode that best suits your viewing enviroment.

Select your information in all of the categories below.

TV Setup Complete!

Your TV is now ready to use

Auto Program

Antenna Both

Digital Cable System STD

Analog Cable System STD

Select current connected antenna.

To get channels, set the options below then select Scan.

Scan

Auto Program

Auto Program is channels for you...

Air 21

Stop

DTV Air0 Air DTV Cable Cable

0 0 0

Clock

-- : -- --

You can adjust your time to set DST, Time Zone and clock mode

Set current date and time

Clock Mode Auto

Date

-- / -- / ----

Time

-- : -- --

DST Off

Time Zone Eastern

To register this product please visit

www.samsung.com/register.

STOP

Please do not return

this unit

If you are having problems operating this TV,

Please call;

US : 1-866-894-0524

CANADA : 1-800-726-7864

For web support please visit http://www.samsung.com/us/business

List of Parts

Remote Control (AA59-00817A) & Batteries

(AAA x 2)

Holder-Wire stand 1(EA)

(not for 24” models)

Power Cord

Data Cable (BN39-00865B,BN39-01011E)

Owner’s Instructions

Safety Guide

Hotel Mount Kit

(not for 24” models)

Installing the LED TV Stand

♦ HG24ND470 / HG32ND470 / HG40ND470 / HG32ND477 / HG40ND477

Components

When installing the stand, use the provided components and parts.

(for 24” models)

• Stand • Screws

2 3

x3 (M4 x L12)

✎ Place a soft cloth over the table to protect the TV, and then

place the TV on the cloth screen-side down.

✎ Insert the Stand Guide into the slot on the bottom of the TV.

✎ Make sure to distinguish between the front and back of the Stand and Stand Guide when connecting them.

✎ Make sure that at least two people lift and move the LED TV.

✎ When connecting the stand, lay the product down on a soft surface, with the screen facing down, and then fasten the screws.

✎ The number of screws may differ depending on the model.

x3 (M4 x L12, for 24” models)

(for 32” and above models)

• Stand • Guide Stand • Screws • Security Screws

Front

(M4 X L12)

Attention

DO NOT USE

GREASE

DO NOT USE

OIL

CHEMICALS

TOP View

Side

x8 (M4 x L12)

2 3

✎ Place a soft cloth over the

table to protect the TV, and then place the TV on the cloth screen-side down.

✎ Insert the Stand Guide into

the slot on the bottom of the TV.

x 4 (M4 x L12)

x 4 (M4x12)

♦ Assembling the swivel

The 32” and larger LED TVs have swivel stands. You can set these stands so that the TV swivels 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right.

20° swivel

To congure the TV so that it swivels 20° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 20°. Then, x the Bracket Holder Swivel

to the stand using the three supplied screws as shown to the left.

60° swivel

To congure the TV so that it swivels 60° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 60°. Then, x the Bracket Holder Swivel

to the stand using the three supplied screws as shown to the left.

90° swivel

To congure the TV so that it swivels 90° left and right, remove the Bracket Holder Swivel, and then

screw the three supplied screws into the stand as shown to the left.

♦ Hotel Mount Kit (only for swivel stands)

Afx the stand to a at surface such as a

dresser top, desk top, or entertainment center as shown.

Short Bolt (2EA) Long Bolt (2EA)

Nut (2EA) Washer (2EA)

Bolt + Nut

Top

Bottom

WARNING: To prevent injury, you must attach this

TV securely to the oor, a table, a dresser top,

etc. with the Hotel Mount Kit as described in these instructions.

Viewing the Connection Panel

HDMI IN 3

(ARC)

HDMI IN 2

(DVI)

DATA

HDMI IN 1

(5V 0.5A)

/CLONING

AV IN

VIDEO

AUDIO

OUT

AUDIO

EX-LINK

HD470 24" MODEL USE HD470/477 32” MODEL USE HD470/477 40”MODEL USE

AIR/CABLE

ANT IN

HDMI IN 1

AV IN

VIDEO

AUDIO

➣ The product color and shape may vary depending on the model.

1 HDMI IN 1, 2(DVI), 3(ARC) 2 USB (5V 0.5A) / CLONING 3 VIDEO / L-AUDIO-R 4 EX-LINK 5 AUDIO OUT 6 ANT IN (AIR/CABLE) 7 DATA

When in Hotel mode (Interactive or Standalone), all Channel menu items in the Menu OSD except for the

Notice

Channel List are deactivated. If you need to change the channel line up, use the Channel Setup item in the Hotel options menu.

HDMI IN 3

(ARC)

HDMI IN 2

(DVI)

DATA

AUDIO

EX-LINK

OUT

AIR/CABLE

ANT IN

HDMI IN 1

(5V 0.5A)

/CLONING

AV IN

VIDEO

AUDIO

HDMI IN 3

(ARC)

HDMI IN 2

(DVI)

DATA

AUDIO OUT

EX-LINK

AIR/CABLE

ANT IN

TV Controller

The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the remote control.

Selecting the

Media Play

TV Controller

The image is drawn as if

Selecting the

Return

Select a source.

Function menu

Remote control sensor

Power off

✎ The product color and shape may vary depending on the model.

✎ To exit the menu, press the Controller for more than 1 second.

✎ When selecting a function by moving the controller up/down/left/right, be sure not to press up on the controller. If you press up

rst, it will not operate correctly.

Standby mode

Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for example). It is best to unplug the power cord.

you are facing the front side of the TV.

Connecting the TV with an SBB or STB

1. Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the data cable.

ETH MODEM

✎ The “ETH MODEM” jack name that you connect

the Data Cable to may differ depending on the SBB or STB type.

List of Vendors and Compatible Data Cables Supplied with the TV

♦ Refer to the code label on the data cable.

Note the

labeled end.

Confirm the code

on the Code Label

Note the labeled

end.

Vendor Cable code

Samsung OCC

Enseo Guest-Tek

NXTV BN39-01011B

BN39-00865B

nStreams BN39-01110A

MTI BN39-01011C

Hotel Plug & Play

The Hospital Plug & Play function, which automatically performs the Hospital Mode selection, Country Setup, Clock Setup, and

Picture Mode Setup, runs once when power is rst turned ON. Setup also runs automatically after you have executed a Service

Reset.

♦ Hospital Plug & Play OSD

– Initially highlighted: Interactive

– If you select the Standalone Only button, Standalone

hospital mode is set by default and the “Standalone mode is set” OSD appears for 3 seconds.

– TV enters into RF mode automatically after displaying

the “Standalone mode is set” OSD for 3 seconds.

– If you select Interactive mode, the Interactive Setup

Menu is displayed. Press the power off key to exit the Interactive menu.

– If you select Standalone setup mode, the “Select Menu

Language” OSD appears.

♦ Local Set

– Initially highlighted: US

– If you press the Enter key after selecting Change, you

can change the country.

– If the country is changed, the TV automatically turns off

and on.

– If you select the incorrect country, execute TV Reset

again after entering the Service section of the Hospital Menu.

♦ Select Menu Language OSD

– If you select Standalone setup from the “Select Hospital

TV Mode” OSD, the “Select Menu Language” OSD appears.

– Initially highlighted: English

– Display time: OSD time out and operation are the same

as Samsung’s consumer TV models.

– If you press the Enter key, the “Picture Mode” OSD

appears

♦ Picture Mode OSD

– Initially highlighted: Standard.

– The TV displays the Picture Mode OSD where you can

choose Dynamic or Standard Picture mode.

♦ Auto Search Mode OSD

– If you press the Enter key, the TV automatically

searches for channels.

– The OSD Display time, which starts when the Auto

Store operation is completed and continues until the Auto Sort function starts, is 30 seconds.

♦ Set Clock Mode, DST(Daylight saving time), and Time

Zone OSD

– Initially highlighted: Clock Mode : Auto, DST : Off, Time

Zone : Eastern

– If the TV will be tuned to digital broadcast channels, and

these channels transmit date and time information, set the Clock Mode to Auto. The TV will set the date and time automatically.

– If the TV will not be tuned to digital broadcast channels,

set the Clock Mode to Manual, and then set the date and time on the TV manually.

– Set DST On or Off to apply or not apply daylight saving

time to the TV.

– Select your time zone on the map appears.

BN68-07039C-X0

♦ UI Scenario

Self Diagnosis for TV

Self Diagnosis for HTV

SW Update

Service Pattern

ATV cable AGC Gain

DTV OpenCable AGC Gain

Sound Bar Out

Contact Samsung

Standby LED

TV Reset

Change Locat Set if Located in North America, Latin America and Europe.

In other regions, Please press SKIP button move to the next step.

Current Localset : US

Change Skip

If you select Skip

Easy Set up

Intertactive

(Hotel Menu)

Standalone Setup

(Continue Setup)

Standalone Only

(End Setup)

If you select Standalone Setup

Select your Language

Select your language to start the on screen setup.

English

Español

Français

The Language Setting will be applied to Main Menu and not Plug and Play.

Select your language

Standalone

Hospitality Option Menu

appears.

Press Power OFF to exit.

Local Set

OFF

Default

If you select this, the setup process will be completed and go to hotel menu

If you select TV Reset, the TV resets all values to their factory defaults and then displays the Hospital Plug & Play menu. Go to the first Hospital Plug & Play screen below.

OFF

If you select Change

Press the arrow buttons to move around the screen. Press the Enter button to select.

Select Clock Mode, DST, and your Time Zone

Warning! TV might not function if local set is not correctly configured.

Countries List USA

If you don’t change the country of the Current Location

If you select

Standalone Only

If you select Interactive

Select Picture mode

Local Set

When Local set is changed, TV will turn off automatically to apply it.

TV will enter the RF mode.

Interactive

Hospitality Option Menu

appears.

If you change the country of the Current Location

The TV is automatically turned off and on.

Press Power OFF to exit.

Select the channel

band to use for Auto

Program

After Searching

channels.

Auto Program

Auto Program is incomplete. 0 channels are memorized

DTV Air0 Air DTV Cable Cable

0 0 0

Change Settings Scan Again

Sound Bar

♦ Samsung Sound-Bars and Hotel TVs in 2015

[HD470_477-ZA-QSG]BN68-07039C-X0L02.indd 1 2015-01-26 �� 11:13:52

1. Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a compatible Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV’s sound through the Sound-Bar.

2. The item of Sound bar Out in Hospitality Option Menu makes you control to where the TV sound is outputted when the TV is turned on.

– If Sound bar Out is On, the TV sound is automatically outputted in the Sound Bar device only whenever TV is turned on.

– If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on.

3. Models supporting the ARC function are listed below:

– Sound-Bars: HW-E350/E450/E550

HW-F350/F355/FM35/F450/FM45/FM45C/ F550/F551/FM55/FM55C/F750/F75

♦ Setting the Sound-Bar to Hotel Mode.

4. Set the following Hotel menu options:

– Hotel option > System > Sound Bar Out = On.

– Hotel option > Power On > Power On Volume = User Defined.

– Hotel option > Power On > Power On Volume Num > Set greater than 0.

– Hotel option > Power On > Max Volume > Set greater than 0.

5. Connect an HDMI cable from the HDMI OUT jack at the back of the Sound-Bar to the HDMI3 port (supporting ARC) on the hospitality TV.

6. After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the TV, and then automatically switches to Hotel Mode.

Sound Bar Hotel mode functional characteristics:

– Power On/Off is synchronized with the TV

– HDMI_CEC defaults to On

– Functions through the “HDMI OUT” port only

– Disables the “Input mode” key on the VFD to prevent unexpected audio-source changes.

– Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar’s Power On

Volume and Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in the TV’s Hotel options menu.

– Example: If the TV’s Power On Volume=20 and Max Volume=90, then the Sound Bar’s Power On Volume=10 and Max

Volume=45.

Wall Mount Kit Specications (VESA)

Install your wall mount on a solid wall perpendicular to the oor. If you are attaching the wall mount to building materials other

than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause severe personal injury.

➣ Standard dimensions for wall mount kits are shown in the table below.

➣ Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided.

➣ Do not use screws that do not comply with the VESA standard screw specications.

➣ Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw

specications. Screws that are too long may cause damage to the inside of the TV set.

➣ For wall mounts that do not comply with the VESA standard screw specications, the length of the screws may differ

depending on the wall mount specications.

➣ Do not fasten the screws too rmly. This may damage the product or cause the product to fall, leading to personal injury.

Samsung is not liable for these kinds of accidents.

➣ Samsung is not liable for product damage or personal injury when a non-VESA or non-specied wall mount is used or the

consumer fails to follow the product installation instructions.

➣ Do not mount the TV at more than a 15 degree tilt.

➣ Always have two people mount the TV onto a wall.

Product Family

LED-TV

TV size in

inches

VESA screw hole

specs (A * B) in

millimeters

24 75 × 75 M4

200 × 200 M8

Do not install your Wall Mount Kit while your TV is turned on. This may result in personal injury due to electric shock.

Standard Screw

(Length*

Pitch in mm)

Quantity

432

Licence

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.

Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152, 5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.

The terms HDMI and HDMI High-De nition Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

DivX Certied® to play DivX® video up to HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an ofcial DivX Certied® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your les into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied® device must be registered in order to play purchased DivX Video-on-

Demand (VOD) movies.

To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

DivX®, DivX Certied® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under

license.

Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274

Open Source License Notice

Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com)

Open Source License Notice is written only English.

Dimensions

HG24ND470

(unit: mm)

1 2 3 4 5 6 7 8 9

HG24ND470 561.8 523.3 600.0 295.2 349.1 384.2 47.9 65.2 163.8

HG32ND470 / HG32ND477 HG40ND470 / HG40ND477

1 2 3 4 5 6 7

HG32ND470 HG32ND477

HG40ND470 HG40ND477

738.4 703.4 397.8 441.7 498.1 191.7 93.1

905.2 879.5 486.3 525.4 562.7 226.5 91.1

Specications

Environmental onsiderations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

Model Name HG24ND470 HG32ND470 / HG32ND477

Display Resolution 1366 x 768

Screen Size

(Diagonal)

24” Class

(24.0” measured diagonally)

Sound (Output) 5W x 2

Dimensions (WxDxH)

Body

With stand

561.8 x 65.2 x 349.1 mm

561.8 x 163.8 x 384.2 mm

Weight

Without Stand

With Stand

3.9kg

4.1kg

Stand Swivel (Left / Right) 0°

Model Name HG40ND470 / HG40ND477

Display Resolution 1920 x 1080

Screen Size

(Diagonal)

Sound (Output) 10W × 2

Dimensions (WxDxH)

Body

With stand

Weight

Without Stand

With Stand

Stand Swivel (Left / Right) 20° / 60° / 90°

➣ Design and specications are subject to change without prior notice.

➣ This device is a Class B digital apparatus.

WARNING: This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)

5% to 95%, non-condensing

32” Class

(32.0” measured diagonally)

738.4 x 93.1 x 441.7 mm

738.4 x 191.7 x 498.1 mm

5.4kg

5.9kg

40” Class

(40.0” measured diagonally)

905.2 x 91.1 x 525.4 mm

905.2 x 226.5 x 562.7 mm

6.4kg

9.4kg

(unit: mm)