¦¦ Hotel Logo
The Hospitality Logo function displays the Hotel's logo when the TV is powered on.
––The Hospitality Logo settings are in the Hospitality mode menus.
––The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on.
––If there is a logo image stored in the memory and the Hospitality Logo option is on, the Hospitality logo is displayed when the TV is turned on.
––The Hospitality logo is not displayed when the Hospitality Logo option is off, even if the logo image has been loaded onto the TV.
|
Hospitality Mode |
Standalone |
System |
|
|
|
|||
|
SI Vendor |
OFF |
|
|
|
|
|
||
|
|
|
||
|
Power On |
|
|
|
|
|
|
|
|
|
Channel |
|
|
|
|
Menu OSD |
|
|
|
|
|
|
|
|
|
Clock |
|
|
|
|
Music Mode |
|
|
|
|
Remote Jack Pack |
|
|
|
|
External Source |
|
|
|
|
Bathroom Speaker |
|
|
|
|
Eco Solution |
|
|
|
|
Logo/Message |
|
|
|
|
Cioning |
|
|
|
|
REACH Solution |
|
|
|
|
|
|
|
|
|
Security |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
r
|
Welcome Message |
OFF |
|
|
Edit Welcome Message |
|
|
|
Hospitality Logo |
BMP |
|
|
Hospitality Logo DL |
|
|
|
Logo Display Time |
5 Second |
|
|
|
|
|
<Depending on model and region, some menu items may not exist>
•Hospitality Logo
––This option lets you choose whether the Hospitality Logo image is displayed or not.
––The Initial value is OFF.
––Can be set to OFF or ON.
––When set to ON, the Logo Download and Logo Time Display menu items become accessible.
•Hospitality Logo DL
––This option lets you download the logo image to the TV’s memory from a USB device.
––The Wait message appears while the image is being copied to the TV.
––The Completed message appears when the copy operation has finished successfully.
––The Failed message appears when the copy operation was unsuccessful.
––The No USB device message appears if no USB device is connected.
––The No File message appears if there is no file to copy on the USB device or if the file is in the wrong format (must be a BMP file). If the No File message appears and there is a logo file on the USB device, check the file format.
•Logo File Format
––The TV only supports the BMP and AVI formats.
––The file name must be samsung.bmp or samsung.avi.
––The maximum resolution of the BMP format is 1280 x 720.
––The maximum file size of the AVI format is 30MB.
––The TV does not change the size or scale of the image.
English 21
[HC460-465-EU]Install-Guide-X0ENG.indd 21 |
|
|
2014-05-21 3:08:25 |
|
|
||
|
|
|
|
¦¦ Cloning
USB Cloning is a function to download user configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV set and upload the same settings to other TV sets.
All user-defined settings from the TV (Master Set) can be copied to the USB device.
•Cloning from TV to USB: This is an operation that copies the stored data from a specific area of the TV EEPROM to the USB device.
1.Insert a USB drive into the USB port on the back of the TV.
2.Enter the Hotel Options by pressing these buttons in the following order.
MUTE → 1 → 1 → 9 → ENTER
3.Press the ▲ or ▼ button to select “Clone TV to USB”, then press the ENTER button.
4.The message “Clone TV to USB” is displayed, then press the ENTER button.
5.You can check the status of the USB cloning operation.
•In Progress: While copying data to the USB device.
•Completed: The copy operation was finished successfully.
•Failed: The copy operation was not finished successfully.
•No USB: No USB device connected.
•Clone USB to TV: This is an operation that downloads the stored data to the USB device to the TV set.
1.Insert a USB drive into the USB port at the back of the TV.
2.Enter the Hotel Options by pressing these buttons in the following order.
MUTE → 1 → 1 → 9 → ENTER
3.Press the ▲ or ▼ button to select “Clone USB to TV”, then press the ENTER button.
4.The message “Clone USB to TV” is displayed, then press the ENTER button.
5.You can check the status of the USB cloning operation
•In Progress: While copying data to the USB device.
•Completed: The copy operation was finished successfully.
•Failed: The copy operation was not finished successfully.
•No USB: No USB device connected.
•No File: There is no file to copy on the USB device.
Activate copying from USB to TV by pressing ENTER key for 5 seconds.
The CLONE function only supports the same model series. (It does not work properly for
(5V 0.5A) / CLONING
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize |
OFF |
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize |
OFF |
different model series.)
For fast, instant cloning during installation,
insert a USB drive with master settings from the first TV and press the Enter key for 5 seconds.
22 English
[HC460-465-EU]Install-Guide-X0ENG.indd 22 |
|
|
2014-05-21 3:08:25 |
|
|
||
|
|
|
|
¦¦ Plug & Play
The Hotel Plug & Play function automatically performs the Hotel mode selection, Country Setup, Clock Setup and Picture mode Setup when the TV starts for the first time.
––Hotel Plug & Play is only available when the power is turned ON for the first time.
––After setting up the TV first and running Clone TV to USB.
––Next, the TV only needs to exit Hotel Plug & Play, connect to the USB device, then run Clone USB to TV.
Local Set
Change Local Set if Located in North America, Latin America and Europe. In other regions, Please press SKIP button move to the next step.
Current Localset : EU
Change Skip
If Skip is selected
Easy Set up
|
If you select this,Easy |
|
setup will be started. |
Standalone Setup |
There are Essential |
Details, Channel Scan, |
|
c |
Clock and Terms in Easy |
(Continue Setup) |
Setup. |
Next |
|
Standalone Only |
|
(End Setup) |
|
If Standalone
Setup is selected
Select your Language
Select your language to start the on screen setup.
English |
|
|
Eesti |
Press the ▲▼◄► |
|
buttons to move the |
||
|
Suomi |
highlight. |
|
Press the enter button to |
Français |
select. |
Deutsch |
|
The Language Setting will be applied to Main Menu and not Plug and Play.
MAIN : Option, MODE : DTV, RES : NOTSUPPORT, Standalone Menu
Hospitality Mode |
Standalone |
SI Vendor |
OFF |
|
|
Power On |
|
|
|
Channel |
|
|
|
Menu OSD |
|
|
|
|
|
|
|
|
|
Standalone mode is set |
|
|
|
TV will enter the RF mode |
||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If Standalone |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Only is selected |
|
|
|
Configure your TV |
|
|
|
|
|
|
|
|
Auto Tuning |
|||||
|
|
|
|
|
Select your information in the categories below. |
|
|
|
|
|
To receive channels, configure the options below Select the connected aerial |
|||||||
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
Select the country that |
|
|
|
|
|
then select Scan. |
|
|
that you want to use to get |
||
|
|
|
|
|
|
|
you're in now |
|
|
|
|
|
|
|
|
|
|
channels. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Country |
Bulgaria |
|
|
|
|
|
|
Aerial |
|
|
Air |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
Picture Mode |
Standard |
|
|
|
|
|
Channel Type |
Digital & Analogue |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Scan |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Auto Tuning |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
Auto tuning is finding channels for you... |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
C40 |
625MHz |
2% |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Digital |
0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TV |
0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Radio |
0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Data/Other |
0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Analogue |
0 |
|
|
|
|
|
<Depending on Region, this step |
|
|
|
Stop |
||||||||||||
|
|
may not exist.> After selecting |
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|||||||||||
|
|
the country in the country menu, |
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|||||||||||
|
|
some models may proceed with an |
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|||||||||||
|
|
additional option to setup the pin |
|
|
|
Auto Tuning |
||||||||||||
|
|
number. |
|
|
|
|
|
|
|
|
Auto Tuning Complete. |
|||||||
|
|
If you forget the PIN code, in the |
|
Digital |
0 |
|
|
|||||||||||
|
|
Hotel menu, select the SERVICE |
|
|
|
|||||||||||||
|
|
|
TV |
0 |
|
|
||||||||||||
|
|
→ TV Reset. And set the pin code |
|
Radio |
0 |
|
|
|||||||||||
|
|
|
Data/Other |
0 |
|
|
||||||||||||
|
|
again in the Plug & Play. |
|
|
|
|
|
|
||||||||||
|
|
|
Analogue |
0 |
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Change Settings Scan Again |
|||
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
* It may differ depending |
|
||||||||||
|
|
|
|
|
|
|
on the model. |
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
Clock
Music Mode
Remote Jack Pack
External Source
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
System
When complete, power down TV.
When pressing OK button, the hotel menu appears as shown on the left. Complete the hotel menu settings, and then reset the TV. You can use your TV.
TV Setup Complete!
Your TV is now ready to use.
Ok
* It may differ depending on the model.
Clock
You can adjust your time to set DST, Time Zone and |
Set current date and time |
clock mode |
|
Clock Mode |
Auto |
|
Date |
--/--/---- |
|
Time |
--:-- |
|
Time Zone |
Auto |
|
DST |
Off |
--:-- |
|
|
English 23
[HC460-465-EU]Install-Guide-X0ENG.indd 23 |
|
|
2014-05-21 3:08:27 |
|
|
||
|
|
|
|
Local Set
Change Local Set if Located in North America, Latin America and Europe. In other regions, please press SKIP button move to the next step.
Current Localset : AD_AU_NZ2
Change Skip
Select yout Language
Select your language to start the on screen setup.
c English
|
Press the udlr |
buttons to move the |
|
|
highlight. |
|
Press the enter button |
to select. |
|
Français |
|
Italiano |
^ |
|
The Language Setting will be applied to Main Menu and not Plug and Play.
Easy Set Up
If Skip is |
|
selected |
cStandalone Setup |
|
(Continue Setup) |
|
Standalone Only |
|
|
|
(End Setup) |
|
If Standalone |
|
Setup is selected |
Select Language (Hong Kong only have
“English ”)
If you select this, Easy setup will be started.
There are Essential Details, Channel Scan, Clock and Terms in Easy setup.
Configure your TV
Select your infomation in the categories below. |
Select the country that |
|
|
|
you're in now |
Country |
Australia |
|
Picture Mode |
Standard |
|
Set Country and Picture Mode (Hong Kong no have Country option)
Auto Tuning
To receive channels, configure the options below |
Select the connected |
|
then select Scan. |
|
aerial that you want to use |
|
|
to get channels. |
Aerial |
Air |
|
Channel Type |
Digital & Analogue |
|
Scan
Auto Tuning
Auto Tuning is finding channels for you...
Channel 27
|
7% |
|
Digital |
0 |
|
• TV |
0 |
|
• Radio |
0 |
|
• Data/Other |
0 |
|
|
|
|
Analogue |
0 |
|
Stop
|
|
Auto Tuning |
||
Auto Tuning completed. |
|
|
|
|
|
Digital |
0 |
|
|
|
• TV |
0 |
|
|
|
• Radio |
0 |
|
|
|
• Data/Other |
0 |
|
|
|
|
|
|
|
|
Analogue |
0 |
|
|
|
change settings |
Scan Again |
24 English
If Standalone Only
is selected:
Standalone mode has been set.
TV will enter the RF mode.
Power off
MAIN : Option, MODE : DTV, RES : NOTSUPPORT, Standalone Menu
Hospitality Mode |
Standalone |
SI Vendor |
OFF |
Power On |
|
Channel |
|
|
|
Menu OSD |
|
|
|
Clock |
|
Music Mode |
|
|
|
Remote Jack Pack |
|
|
|
External Source |
|
Eco Solution |
|
|
|
Logo/Message |
|
Cloning |
|
REACH Solution |
|
Security |
|
System |
|
|
|
When complete, Power down TV.
TV Setup Complete!
Your TV is now ready to use.
|
OK |
|
|
|
|
|
|
|
|
|
|
|
Clock |
|
|
You can adjust your time to set DST, Time Zone |
Set current date and time |
||
and clock mode |
|
|
|
Clock Mode |
|
Auto |
|
Date |
-- / -- / ---- |
|
|
Time |
-- : -- -- |
|
|
Time Zone |
New South Wales/ACT |
|
-- : --
Set Clock
[HC460-465-EU]Install-Guide-X0ENG.indd 24 |
|
|
2014-05-21 3:08:28 |
|
|
||
|
|
|
|
1.LocalSet
––Check the Current Localset.
––If you want to change the localset, select the Change.
––If you select the Skip, the Start screen appears.
2.Start - Easy Set Up
––If you select the Standalone Only, the Standalone hotel mode is set by default.
––When you select the Interactive, Interactive Setup Menu is displayed. Press the power off button to exit from the Interactive menu.
––Select the Standalone Plug & Play to go next step.
3.Select the Language
––Select the OSD (On Screen Display) language.
––Display time: The OSD timeouts and operations are the same as all of Samsung's consumer TV models.
4.Select the Country and Picture Mode
––Select the appropriate country and picture mode.
––Depending on model and region, some country may not exist.
5.Auto Tuning
––Select the antenna source and channel type. Configure the settings and select the Scan.
––The Auto Tuning operation starts searching for channels
––When the Auto Tuning operation is completed, the channel information is displayed.
6.Clock
––Set the right time by setting the DST (Daylight Savings Time) and Time Zone.
7.TV Setup Complete
English 25
[HC460-465-EU]Install-Guide-X0ENG.indd 25 |
|
|
2014-05-21 3:08:28 |
|
|
||
|
|
|
|
¦¦ HD Plug & Play – Local Set (Only Europe)
•Local Set is very important software setting value such as Languages, Broadcast frequencies, etc.
•TV might not function, if Local Set is not correctly configured. Select correct Local Set with country list provided.
Region |
Country |
Local Set |
|
|
|
Europe |
Bulgaria |
EU |
|
Croatia |
|
|
Czech |
|
|
Estonia |
|
|
Greece |
|
|
Hungary |
|
|
Latvia |
|
|
Lithuania |
|
|
Romania |
|
|
Serbia |
|
|
Slovakia |
|
|
Slovenia |
|
|
EU Others |
|
|
|
|
|
Italy |
EU_ITALY |
|
|
|
|
Austria |
EU_GER |
|
Germany |
|
|
Switzerland |
|
|
|
|
|
France |
EU_FRANCE |
|
|
|
|
Belgium |
EU_BENELUX |
|
Luxembourg |
|
|
Netherlands |
|
|
|
|
|
Portugal |
EU_SPAIN |
|
Spain |
|
|
|
|
|
United Kingdom |
EU_UK |
|
Ireland |
|
|
|
|
|
Denmark |
NORDIC |
|
Finland |
|
|
Norway |
|
|
Sweden |
|
|
|
|
|
Turkey |
EU_TURKEY |
|
|
|
|
Poland |
EU_POLAND |
|
|
|
CIS |
Kazakhstan |
CIS_RUSSIA |
|
|
|
|
Russia |
|
|
|
|
|
Ukraine |
|
Local Set change option on the first page of Region Country HD plug&play
Local Set
Change Locat Set if Located in North America, Latin America and Europe. In other regions, Please press SKIP button move to the next step.
Current Localset : EU
Change |
Skip |
Local Set
When Local Set is changed, TV will turn off automatically to apply it.
EU_GER
Countries List
Austria, Germany, Switzerland
Local Set
When Local Set is changed, TV will turn off automatically to apply it.
NORDIC
Countries List
Denmark, Finland, Norway, Sweden
Self Diagnosis for TV
SW Update
Service Pattern |
OFF |
Contact Samsung
TV Reset
If you need to change Local Set after HD
plug&play, click TV Reset function on Factory mode, you can progress HD plug&play including Local Set change.
Easy Set up
|
If you select this,Easy |
|
setup will be started. |
Standalone Setup |
There are Essential |
Details, Channel Scan, |
|
|
Clock and Terms in Easy |
(Continue Setup) |
Setup. |
Next |
|
Standalone Only |
|
(End Setup) |
|
Select right Local Set with country list
Local Set
When Local Set is Changed, TV will turn off automatically to apply it.
EU
Countries List
Bulgria, Croatia, Czech, Estonia, Greece, Hungary, Latvia,
Lithuania, Romania, Serbia, Slovakia, Slovenia, EU-Others
Local Set
When Local Set is changed, TV will turn off automatically to apply it.
EU_FRANCE
Countries List
France
TV will reboot automatically to apply new Local Set
Local Set
When Local Set is Changed, TV will restart automatically to apply it.
Turn off and reboot automatically as Local Set is changed
OK
Countries List
Bulgria, Croatia, Czech, Estonia, Greece, Hungary, Latvia,
Lithuania, Romania, Serbia, Slovakia, Slovenia, EU-Others
After reboot, updated
Local Set is shown
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, please press SKIP button move to the next step.
Current Localset : EU_FRANCE
Change |
Skip |
Press Skip, general HD plug&play will be continued
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : EU_FRANCE
Change |
Skip |
26 English
[HC460-465-EU]Install-Guide-X0ENG.indd 26 |
|
|
2014-05-21 3:08:28 |
|
|
||
|
|
|
|
¦¦ SW Clock
The SW Clock shows the current time on the screen when a user presses the Info remote control key in standby mode.
––If a user presses the Info key when the TV is in standby mode, the TV is turned on and shows the current time on the screen for 10 seconds and then returns to standby mode.
––The time is displayed as a digital clock at the normal banner size. The 12 or 24 hour time format is determined according to the format of the Information.
––If a user presses the Info key when the TV is on, the original Info key function is executed.
•Detailed Descriptions
––The SW clock works depending on the On/Off setting in the Factory install menu.
––If the SW clock is turned on, the Fast logo option is automatically turned off. (In this case, even if you turn the Fast logo option on again, it is automatically turned off when the TV is turned on again.)
––If the master power is turned off, the time setting is only maintained in models with a backup condenser and an RTC.
––When a TV in standby mode shows the current time, the video mute and audio mute settings are maintained.
––In this case, even if the Hotel logo is set to on, the Hotel Logo display is skipped.
––This feature only works in StandAlone mode.
––Other key function specifications when the SW clock is running
––The Info key works like the power key.
––Pressing the Power or Info key while the SW clock is running, puts the TV into Standby mode.
––Pressing keys other than the Power and Info keys is ignored while the SW clock is running.
––In this case, the on timer does not work.
––The off timer and sleep timer work.
––When clock mode in the Time menu is set to manual, the time of the sub micom is maintained by the RTC circuit.
––Even if the current time is not configured, it is displayed in the same way as the menu. (--:--)
English 27
[HC460-465-EU]Install-Guide-X0ENG.indd 27 |
|
|
2014-05-21 3:08:28 |
|
|
||
|
|
|
|
¦¦ Multi Code Remocon
Multi Code Remote Control is a special transmitter which is designed to control multiple TVs with one remote.
This function is useful when there is more than one TV in one location such as a hospital. The Set ID number will be displayed in the source OSD. It is possible to support up to 9 different remote key transmission for multi code.
The initial ID code of each TV is “0”.
The ID code can be set and reset in Analog TV mode or PC mode. (not available in TTX or DTV channels)
––The ID code can be from 0 to 9.
––Press the RETURN + MUTE keys for longer than 7 seconds and the digit key you want to set.
––The Set ID OSD will be displayed in a central position.
––The following words will be displayed. “The Remote control code is set to x. If you want to change the Remote control code. Enter the digit you want to change.” (x is the digit number) This OSD will be displayed until the exit key is pressed.
Remote control code is set to 0. If you want to change the Remote control code, enter the chosen digit.
––For example, the TV and Remote control will be set to ID code #1 if the user presses #1.
––The following words will be displayed.“Remote control code is changed to 1”. The TV can then only be controlled by a remote control with the same ID code as the TV.
––If the ID code between the remote control and the TV does not match, the following words will be displayed. “ TV ID x” (x is the TV’s ID)
––To reset the ID code, press the EXIT + MUTE keys for longer than 7 seconds. The ID codes of both the TV and Remote control will be reset to “0”. “Remote control code is set to 0.” will be displayed.
––The way to set or reset the ID may differ depending on the remote control. See the table below.
¦¦ Setting the Time
OMENU → System → Time → Clock → Clock Set
•The time is entered
––Press the remote control button to select Clock and set up the time.
•Setting the Interactive Mode Time
––If the Hotel System transmits the time information, the time is set automatically.
––If the Hotel System does not transmit the time information, the time cannot be displayed.
If the time is set, the clock will be displayed on the front panel.
Time
Clock
Sleep Timer Off
Wake-up Timer
Clcok |
|
Clock Mode |
Manual |
•Clock Set |
|
•Time Zone |
Auto |
|
|
28 English
[HC460-465-EU]Install-Guide-X0ENG.indd 28 |
|
|
2014-05-21 3:08:28 |
|
|
||
|
|
|
|