How it Works
Samsung
Loading...
HG40NA578LFXZA
User Manual
43 pgs6.85 Mb0

Samsung HG32NA478PFXZA, 570, HG40NA570LFXZA, 470, HG39NA570CFXZA User Manual

...
LED TV
Installation manual
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/register
Model Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Introduction
This TV has functionality that lets it interact with a set-back box (SBB/STB) and with other TVs in a computer controlled system for hotels and other hospitality businesses. Interactive : When the TV is powered-up initially, it sends a command to identify the connected SBB/STB. If it identifies the SBB/STB, the TV switches to ONLINE mode which gives full control of the TV to the SBB/STB. When the TV is in ONLINE mode, it stops accepting IR (Samsung remote) commands and acts according to the interface protocol. Stand-Alone: If you are not using an SBB/STB and the TV cannot or does not identify an SBB/STB, you should switch the TV to STAND-ALONE mode with restricted operation.
Operational Modes
When this TV is in Hotel mode and is operated with an SBB/STB, it is in one of two states: ONLINE or STAND-ALONE
• In the STAND-ALONE state, the TV will act as a Hotel TV, but without active communication. This is to prevent guests from trying to cheat the system by disconnecting the SBB/STB.
Stand-alone
SBB/STB Online if one success
within 10 attempts
Mode
Power
ON
SBB/STB Online-10
consecutive fails
SBB/STB Status-Attempt every 2 seconds
Online Mode
Poll Rate 20/sec
To set the options for Stand-alone or Interactive (Online) mode, refer to pages 17-21 (Setting the hotel option data : Menu Items.)
• You can restrict all (or some) operations to prevent guests from "cheating" the TV system.
• You can can set Volume limits and lock or unlock the Panel buttons.
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 format images, stock or news bars or crawls) on the screen. Displaying still pictures continually can cause uneven screen wear, which will affect image quality. To reduce the chance that this effect will occur, please follow the recommendations below:
• Avoid displaying the same TV channel for long periods.
• Always try to display a full screen image.
• Reduce brightness and contrast to help to prevent the occurrence of after-images.
• Use all TV features designed to reduce image retention and screen burn-in. Refer to the proper user manual section for details.
Securing the Installation Space
When you install the TV, maintain the distances shown below between the TV and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to do so may result in a fire or problems with the TV caused by an increase in its internal temperature.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
✎
If you use parts provided by another manufacturer, it may cause a problem with the product or cause the product to fall, leading to serioius injury.
x
Installation with a stand. Installation with a wall-mount.
4 inches
4 inches4 inches
4 inches
4 inches4 inches
4 inches
Additional Information
The appearance of the TV and its accessories may differ from the illustrations in this manual, depending on the TV.
✎
Be careful when you touch the TV if it is on or has been on for a period of time. Some parts can be hot.
✎
Contents
y Introduction .............................................................................................................................................................. 2
y Operational Modes ................................................................................................................................................... 2
y Still image warning .................................................................................................................................................... 2
y Securing the Installation Space ................................................................................................................................. 2
y Additional Information ...............................................................................................................................................2
y Accessories .............................................................................................................................................................. 4
y Installing the LED TV Stand ....................................................................................................................................... 5
y Assembling the swivel (32 inch TVs or larger) ............................................................................................................ 7
y The Control Panel ..................................................................................................................................................... 8
y The Connection Panel ...............................................................................................................................................9
y The Remote Control ................................................................................................................................................ 11
y Connecting the TV with an SBB or STB .................................................................................................................. 12
y B-LAN (HG478/578) ...............................................................................................................................................14
y Connecting the RJP (Remote Jack Pack) ................................................................................................................ 15
y Setting the Hotel Option Data .................................................................................................................................17
y Installing the Wall Mount .........................................................................................................................................32
y Anti-theft Kensington Lock ...................................................................................................................................... 33
y Specifications ......................................................................................................................................................... 34
y Dimensions ............................................................................................................................................................. 35
ENGLISH
Symbols Used in this Manual
t
TOOLS
Indicates that you can press the
TOOLS button on the remote control
to use this function.
Note One-Touch Button
English
3
Accessories
✎
Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎
The items’ color and shape may vary, depending on the model.
✎
The parts for the stand are listed under Stand Components on the following page.
y Remote Control (AA59-00628A) & Batteries (AAA x 2) y Hotel Mount Kit y Owner’s Instructions y Power Cord y Safety Guide / Quick Setup Guide
(Not available in all locations)
4 EA (M4 X L12)
y Security Screws
– Bit tool (sold separately)
y Data Cable
(BN39-00865B, BN39-01011C : except 478/578 model)
English
4
Installing the LED TV Stand
The 32” and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right. 60 degrees left and right, or 90 degrees left and right. See page 7. The 26” LED TVs do not have swivel stands.
Components
When installing the stand, use the provided components and parts.
A
1 EA
B
1 EA
C
x8 (M4 X L12)
D
x4 (M4 X L12, SECURITY)
y Stand (depending on the model) y Guide Stand y Screws
1 2
C
A
(M4 X L12)
B
x4
Top View
Front
ATTENTION
Rear
DO NOT USE CHEMICALS
DO NOT USE
GREASE
DO NOT USE
OIL
✎
Place a soft cloth over the table to protect the TV, and then place the TV on the cloth screen side down.
✎
Insert the Stand Guide into the slot on the bottom of the TV.
3
Side View
4
(Correct assembly) (Incorrect assembly)
C
x4
(M4 X L12)
D
x4
(M4 X L12, SECURITY)
English
5
¦ Hotel Mount Kit
Long Bolt (2EA) Short Bolt (2EA) Nut (2EA) Washer (2EA)
Top
Bolt + Nut
Bottom
✎
Make sure to distinguish between the front and back of the Stand and Stand Guide when assembling them.
✎
Make sure that at least two people lift and move the TV.
Affixing the stand to a flat surface such as a dresser top, desk top, or entertainment center.
English
6
Assembling the swivel (32 inch TVs or larger)
¦ 60° swivel
Leaving the BRACKET HOLDER SWIVEL unchanged lets the TV swivel 20° left and right. Rotating the BRACKET HOLDER SWIVEL 180°, and then assembling the stand as shown below lets the TV swivel 60° left and right.
¦ 90° swivel
Removing the BRACKET HOLDER SWIVEL and assembling the stand as shown below without the BRACKET HOLDER SWIVEL lets the TV swivel 90° left and right.
English
7
Using the TV's Controller
✎
The color and shape of the T V Controller may vary depending on the model.
✎
The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the remote control.
Function menu
CONTENT
Down (Front)
Remote control sensor
TV Controller
Left Right
Up (Rear)
Power on Turn the TV on by pressing the Controller when the TV is in standby mode.
Adjusting the volume Adjust the volume by moving the Controller from side to side when the
power is on.
Selecting a channel Select a channel by moving the Controller backwards and forwards when
the power is on.
Using the Function menu To view and use the Function menu, press and release the Controller
when the power is on. To close the Function menu, press and release the Controller again.
Selecting the MENU (m)
With the Function menu visible, select the MENU (m) by moving the Controller to the left. The OSD (On Screen Display) Menu appears. Select an option by moving the Controller to the right. Move the Controller to the right or left, or backwards and forwards to make additional selections. To change a parameter, select the it, and then press the Controller.
Selecting Contents Home ( )
With the Function menu visible, select Contents Home ( ) by moving the Controller backwards. The Contents Home main screen appears. Select an application by moving the Controller, and then pressing the Controller.
Selecting a Source (s) With the Function menu visible, open the Source(s) screen by pushing
the Controller to the right. The Source screen appears. To select a source, move the Controller back and forth. When the source you want is highlighted, press the Controller.
Power Off (P) With the Function menu visible, select Power Off (P) by pulling the
Controller forwards, and then press the Controller.
✎
To close the Menu, Contents Home, or Source, press the Controller for more than 1 second.
Standby mode
Your TV enters Standby mode when you turn it off, and continues to consume a small amount of electric power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for example). It is best to unplug the power cord.
English
8
The Connection Panel
9
1
2
3
4
5
7 86
✎
Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off.
✎
When connecting an external device, match the color of the connection terminal to the cable.
1 COMPONENT IN / AV IN1 (46" Model: COMPONENT IN / AV IN)
– Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on an A/V
device. – Connects Component video / audio. – The COMPONENT IN jack is also used as the VIDEO 1 jack. – Connect component video cables (optional) to the component jacks ("PR", "PB", "Y") on the rear of your TV and the
other ends to corresponding component video out jacks on a DVD player. – If you wish to connect both the Set-Top Box and a DVD player, you should connect the Set-Top Box to the DVD and
connect the DVD to the component jacks ("PR", "PB", "Y") on your TV. – The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr. – Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of the TV set and the other ends to corresponding
audio out jacks on the external device. – When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (Green) does not match the color of the video cable
(Yellow).
2 DATA
– Used to support data communication between the TV and the SBB. – Connects using RJ-12 TV type plugs.
3 HDMI IN 1 (DVI), 2, 3 / PC/DVI AUDIO IN : Connects to the HDMI jack of a device with an HDMI output.
✎
No sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio and video.
✎
Use the HDMI IN 1 jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio.
[46" Model]
3
0
!
3
0
English
9
4 DIGITAL AUDIO OUT (OPTICAL): Connects to a Digital Audio component. 5 PC / DVI AUDIO IN: Connect to the audio output jack on your PC. 6 PC IN: Connect to the video output jack on your PC. 7 AUDIO OUT: Connects to the audio input jacks on an Amplifier/Home Theater. 8 ANT IN
– To view television channels correctly, the TV must receive a signal from one of the following sources: – An outdoor antenna / A cable television system / A satellite receiver
9 EX-LINK : Connect this jack to the jack on the optional RJP (Remote Jack Pack). This will allow you to connect external
devices (Camcoder, PC, DVD players etc) easily.
0 USB / CLONING
– Connector for software upgrades and Media Play, etc. – Service connection.
! VIDEO / R-AUDIO-L
– Connect a VIDEO cable to an appropriate external A/V device such a VCR, DVD, or Camcorder. – Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on the A/V
device.
English
10
The Remote Control
✎
This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired customers.
Turns the TV on and off.
Press to directly access channels.
Press to select additional digital channels being broadcast by the same station. For
example, to select channel ‘54-3’, press
‘54’, then press '-' and ‘3’.
Adjust the volume.
Display the channel list on the screen.
HOME: Display REACH menu only if
REACH has been downloaded to TV.
Quickly select frequently used functions.
Select on-screen menu items and change
menu values.
Return to the previous menu.
Buttons used in Channel list, Media Play
menu, etc.
button: Enter the hour your want the
TV to turn on.
Use these buttons in the Media Play and
Anynet+ modes.
HOME
TOOLS
RETURN
ALARM
SLLEP
P.SIZE
HDMI
PRE-CH
CHLIST
MENU
CONTENT
SRS
P.MODE
CC MTS
INFO
EXIT
Display and select the available video sources.
Selects the HDMI mode directly.
Return to the previous channel.
Cut off the sound temporarily.
Change channels.
Display the main on-screen menu.
Displays My Contents, Watch TV and Source icons on the TV screen.
Press to display channel and TV information on the TV screen.
Exit the menu.
SLEEP: Sets the Sleep Timer. SRS: Lets you select the SRS TruSurround
HD mode.
P.MODE: Select the picture mode
(Standard, Movie, etc.)
P.SIZE: Choose the picture size. CC: Controls the caption decoder. MTS: Press to choose stereo, mono or
Separate Audio Program (SAP broadcast).
Installing the batteries (Battery size: AAA)
✎
NOTE
Use the remote control within 23~33 feet of the TV.
x
Bright light may affect the performance of the remote
x
control. Avoid using near fluorescent lights or neon signs. The color and shape of the remote may vary depending on
x
the model.
After you have installed the batteries, use a screwdriver to screw in the screw that holds the battery cover closed.
English
11
Connecting the TV to an SBB or STB
TV Rear Panel
ETH MODEM
Data Cable
1. Connect the DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable.
✎
Data cables are polarized. Make sure you attach the end marked TV Side to the TV and the end marked STB Side to the STB. Also make sure you use the correct data cable for your vendor.
English
12
¦ List of Vendors and Compatible Data Cables Supplied with the TV
y Confirm you are using the correct data cable for your vendor. Refer to the code label on the data cables.
Confirm the code on the
Note the labeled end. Note the labeled end.
Vendor Cable code Pin assign Remark
OCC BN39-00865B Provided
NXTV BN39-01011B
nStreams BN39-01110A
Code Label
MTI BN39-01011C
LodgeNet MTI
Provided
English
13
Loading...
+ 30 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use