Desktop Class
Spinpoint F1 DT
Capacity
Model 8MB HD083GJ HD161GJ HD321HJ HD501IJ
16MB HD162GJ HD322HJ HD502IJ HD642JJ
32MB HD753LJ HD103UJ
80GB 160GB 320GB 500GB 640GB 750GB 1TB
250GB
HD251HJ
HD252HJ
FEATURES
• MAX.334GB Formatted Capacity Per Disk • Environment friendly product with RoHS compliance
• Serial ATA 3.0Gbps Interface Support • Improved performance with dual-ARM based firmware
• Improved recording stability over temperature with PMR • ATA S.M.A.R.T. Compliant
• Advanced dynamic FOD control for best data integrity • ATA Automatic Acoustic Management Feature
• Intelligent compensation of external disturbance • ATA 48-bit Address Feature
• SATA Native Command Queuing Feature • ATA Device Configuration Overlay Feature
• Device Initiated SATA Power Management • NoiseGuard™
• Rotational vibration sensort • SilentSeek™
DRIVE CONFIGURATION
Interface Serial ATA 3.0Gbps Temperature
Buffer DRAM Size
Byte per Sector 512 bytes Non-operating -40 ~ 70 °C
Rotational Speed 7,200 RPM Humidity (non-condensing)
PERFORMANCE SPECIFICATIONS
Average Seek time (typical) 8.9 ms Linear Shock (1/2 sine pulse)
Average Latency 4.17 ms Operating 70G
Data Transfer Rate Non-operating 160~320GB 350 G
Media to/from Buffer (Max.) 175 MB/sec 500~1000GB 300 G
Buffer to/from Host (Max.) 300 MB/sec Altitude (relative to sea level)
Drive Ready Time (typical) 160~320GB 8 sec Operating -300 to 3,000 m
RELIABILITY SPECIFICATIONS
Non-recoverable Read Error
Start/Stop Cycles 50,000 Length 147.0 mm
ACOUSTICS
Idle 160~320GB 2.45 Bel 750/1000GB 650 g
Performance Seek 250/320G
POWER REQUIREMENTS
Voltage +5V±5%, +12V±10%
Capacit
1
2
750~1000GB
3
500-1000GB 2.70 Bel
160GB
250GB
320GB
8 / 16 / 32 MB Operating 0 ~ 60 °C
500~640GB 12 sec Non-operating -300 to 12,000 m
1 sector in 10
500-1000
500GB
650GB
15
2.80 Bel
2.90 Bel
750GB
1000GB
ENVIRONMENTAL SPECIFICATIONS
Operating 5 ~ 90 %
Non-operating 5 ~ 95 %
PHYSICAL DIMENSION
Height (Max.) 26.1 mm
Width 101.5 mm
bits
Weight (avg.) 160~320GB 470 g
500/640GB 610 g
* Note : Design and specifications are subject to change without prior not
1.1MB = 1,000,000 Bytes, 1GB=1,000,000,000 Bytes
2. A small portion of the 8/16/32MB buffer memory is reserved for
firmware use
3 Average value with a high performance cover.
4 Random seek with 30% duty cycle.(Average value)
Spin-up Current (Ma
Seek
Read/Write (typical) 6.1W 7.4W 8.4W
Idle (typical) 4.4W 5.7W 6.7W
Standby (typical) 0.7/1W 0.7/1W 0.7/1W
Sleep (typical) 0.7/1W 0.7/1W 0.7/1W
pical
4
2.0A 2.3A 2.4A
5.7W 6.9W 7.6W
3.5" HDD product specification Rev 4.8
Match with product manual Rev 1.0