Samsung GT-S3100, SGH-S3100 Demontage et remontage
Disassembly and Assembly Instructions
11.
11-1.
1)
Disassembly
1 2
Remove screws at6points.
Caution!
*
Be careful not to make scratch and molding
damage
Hold up Slide Ass'y to upside.
1)
Disassemble left and right of REAR locking part
using tool.(2 points)
3 4
Pull the REAR by lifting it from bottom to top
1)
Caution!
*
Be careful not to make scratch and molding
amage!
d
Slide down and Disassemble Front locking part.
1)
points)
(3
11-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
This Document can not be used without Samsung's authorization
Exploded View and Parts List
5 6
Detach Slide FPCB and Pull PBA by lifting it from
1)
bottom to top.
Caution!
*
Be careful to not to tear the Slide FPCB.
7 8
Remove screws at4points.
1)
Slide up and Disassemble bottom of Front locking
1)
part.(3points)
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
1)
2)
11-2
Disassemble side of Front locking partl.(2points)
Detach SLIDE FPCB from lower.
Caution!
*
Be careful to not to tear the Slide FPCB.
9 10
Exploded View and Parts List
Pull the LOWER by lifting it from bottom to top.
1)
and remove from Front ass'y.
Caution!
*
Be careful to not to tear the Slide FPCB.
11 12
Remove green tape and then you can disassemble
1)
Slide FPCB.
Open FPCB connecter and disassemble Slide FPCB.
1)
Open FPCB connecter and disassemble receiver.
2)
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
1)
11-3
Disassemble LCD module.
Loading...