Samsung GH68-12483A User Manual

Before using your headset

Check the accessoriesCheck the accessories

Charge your headsetCharge your headset

Quick Start Guide

Samsung
Bluetooth

WEP420

Get connected in 4 quick steps

Charge your headset
Put your headset in pairing mode
Turn on Bluetooth on your phone and
pair with headset
Test and use

Guide No.: GH68-12483A
04/2007.Rev.1.1

®

Headset

Start here

Headquarters:

1301 East Lookout Drive Suite 150
Richardson, TX 75082

Internet Address:

http://www.samsungmobileusa.com/
accessories

Customer Care Center:

1-888-987-4357

Thank you for purchasing the Samsung Bluetooth
Mono Headset WEP420. We hope you will be
delighted with its operation.
Take a moment before you get started to
familiarize yourself with your new headset.

Earhook

Volume control

buttons

Headset cover

Microphone

Multi-Function
button

Earpiece
Indicator light

Put your headset in
pairing mode

Before you can use your headset, you must pair it
with your phone.

1

Ensure that the headset is off (see Turn

headset on/off on the reverse side of this guide).

2

Press and hold the Multi-Function button until
the indicator light turns on in blue
(approximately 8 seconds).

Make sure you have the following items with your

Make sure you have the following items with your

headset:

headset:

Charging Cradle, Travel Adapter, User’s GuideCharging Cradle, Travel Adapter, User’s Guide

The items supplied with your headset may vary, depending
on your country or service provider.

• Bluetooth version: 2.0 (compatible with devices of
Bluetooth version 1.1 or higher)

• Supported Bluetooth Profiles:

- Headset Profile

- Hands-Free Profile

Turn on Bluetooth on your
phone and pair with headset

1

Set your Bluetooth phone to discover the

headset by following your phone's guide.
Typically, the steps involve going to the Settings,

Connection, or Bluetooth menu on your
phone and then selecting the option to discover
Bluetooth devices.

Your phone will find the Samsung WEP420
headset and ask if you want to pair with it.
Confirm this by pressing the Yes or OK key.

2

Enter a passkey or PIN, 0000 (4 zeros), then

press the Yes or OK key.

Charge the headset's battery fully before using
the headset for the first time.

1

Insert your headset into the slot of the

charging cradle.

2

Plug the travel adapter into the jack on the

charging cradle.

Test and use

Your phone and headset are now paired and
ready to make and receive calls. To confirm
they are operating properly, make a call:

1

Place the headset over your ear.
See Wear the headset on the reverse
side of this guide.

2

On your phone, make a call to the number
you want.

3

If your phone and headset are successfully
paired, you will hear ringing on the headset.

After you have successfully paired your phone
and headset, you do not need to repeat these
initial setup steps each time you use the
headset.

3

Plug the travel adapter into the electrical

outlet.

4

• Charge the headset until the red light on the
headset turns to blue.

• The headset will be fully charged in
approximately 2 hours.

Remove the travel adapter from the charging

cradle.

• The headset cannot be used while charging.

• Use only a Samsung-approved charger or adapter.

Using your WEP420

See Features and Functions Guide
on the reverse side of this guide
for information on using your
WEP420.

Features and
Functions Guide

SAMSUNG
Bluetooth® Headset

WEP420

Important:

Be sure to first follow the
Quick Start Guide on
the reverse side of this guide
to complete initial setup
of your headset.

Turn the headset on/off

To turn the headset on,

Press and hold the Multi-Function button for
4 seconds until you see 4 blue flashes on the
indicator light, then release.
You will hear a tone and see the indicator light
flashes while the power is on
(see Meaning of the indicator light of this guide).

To turn the headset off,
Press and hold the Multi-Function button for

4 seconds until you see blue and red flashes on the
indicator light, then release.
You will hear series of 2 tones and see the indicator
light stops flashing.

Wear the headset

Wear the headset on your ear.
In general, you will get better performance
when there are no obstructions
(including parts of your body)
between the headset
and the phone.

Use the ear hook

Depending on what ear you are going to wear the
headset, simply adjust the ear hook accordingly

Left Right

Troubleshooting

My phone does not find my headset.

Make sure the blue indicator light on your
headset turns on when your phone is
searching for devices.

My headsest worked before but now it is
not working.

Make sure your phone is on and the Bluetooth
feature is turned on in your phone.
If the Bluetooth feature has been turnned off
or was turned on only temporarily, you may
need to restart the Bluetooth feature.
If you have confirmed the Bluetooth feature is
on in your phone, pair your phone and
headset again.

Headquarters:

1301 East Lookout Drive Suite 150
Richardson, TX 75082

Internet Address:

http://www.samsungmobileusa.com/
accessories

Customer Care Center:

1-888-987-4357

Make calls

Make a voice activated call

If the phone’s voice recognition feature is on, you can
make a voice activated call.

1

Press and hold the Multi-Function button. You will hear

the voice-activation tone.

2

Say the name of the person you wish to call.

Depending on your phone, this feature may not be
supported.

Redial the last number

Press the Multi-Function button. When you release the
button, the phone dials the last dialled or received
number.

Depending on your phone, how to redial the last number
may vary.

End a call

Close the headset cover.

Answer a call

When a call comes in, the headset sounds the ring tone and
flashes the blue indicator twice. Choose either of the
following ways to answer the call:

• When the headset cover is closed, open the cover.

• When the headset cover is open, press the Multi-Function
button.

Adjust the volume

Press [+] on the side of the headset to increase the volume
level and press [-] to decrease the volume level.

Use enhanced features

Enhanced features are available for phones that support the
Hands-Free Profile and enhanced features.

• Reject a call
When you receive a call, close the headset cover or press

and hold the Multi-Function button.
Depending on your phone’s setting or type, you may only
be able to mute the ringer or this feature may not be
supported.

• Answer a second call

When your phone notifies you of another incoming call while
you are on a call, press and hold the Multi-Function button to
answer the second call.
You can switch between calls by pressing and holding it.
Depending on your phone, this feature is not supported.

• Place a call on hold

While you are on a call, press and hold the Multi-Function
button. To retrieve the call, press and hold the Multi-Function
button again. Depending on your phone, this feature may not
be supported.

Meaning of the indicator light

Light

Flashes in
blue every
8 seconds.

Flashes in
blue every 3
seconds.

Flashes in
red.

*Depending on the phone type and usage, the actual time

may vary.

Tone

Quick series
of 2 tones.
(Active mode
starts.)

Quick series
of 2 tones.
(Standby
mode starts.)

5 tones every
20 seconds.

The headset is in Active mode.

• The headset has an active
call in progress.

• You can talk up to 4 hours.*

The headset is in Standby mode.

• The headset is waiting
for a call.

• The headset can be in
Standby mode up to 70
hours.*

The battery of the headset is
low.

• There is less than 10% of
battery power left. Recharge
the battery.

Status