Samsung Gear S3 Classic Quick Start Guide
Quick
Start
Guide
Table of Contents
3 Device layout
4 Charge device
7 Pair
9 Navigation
10 Customization
13 Status panel
14 Apps screen
15 Widgets
16 Notifications
17 Phone
20 Messages
23 S Health
25 Find my device
26 Samsung Pay
Device layout
Bezel
Back button
Home/Power
button
Microphone
Touchscreen
Heart rate
sensor
Speaker
To turn on the Gear S3, press and
hold the Home/Power button.
3
Charge device
Fully charge the Gear S3 before
using it.
Wireless
charging dock
Note: Before charging the Gear S3,
remove the rubber cover from the
charging dock.
4
Charging stand
Use the Gear S3 box as a charging
stand.
1. Remove the lid of the box.
2. Remove the plastic tray from the
box and remove the charger,
documents and packaging
materials.
3. Insert the charger
cable through the
hole in the tray
(highlighted gray)
and into the wireless
charging dock.
Replace the tray.
5
4. Place the wireless
charging dock in
the tray and place
the Gear S3 on
the dock.
Caution: During normal operation
and charging, the device and wireless
charging dock may become warm. If the
device, charging dock, or charging stand
feels hot, stop using the device or stop
charging until it cools.
When charging, place the charging
stand on a at, stable surface. Always
ensure the device, charging dock,
and charging stand have adequate
ventilation while charging. Covering
the device may affect air ow and may
impact the performance of the device
and pose the possible risk of serious
bodily injury or property damage.
6
Pair
Download the Gear Manager
app
◆ To connect the Gear S3 to a
smartphone, download the
Gear Manager app from
Galaxy Apps or the
Google Play™ store.
Compatible with select devices using
Android 4.4 and later with at least 1.5
GB RAM. Supported devices may vary
by carrier and device. Some features
may not be available. For best results,
connect with compatible Samsung
Galaxy smartphones. For a list of
compatible smartphones, please visit
samsung.com/gearS3.
7
Pair the Gear S3 to a
smartphone
1. Ensure the Gear S3 is on.
From the smartphone:
2. Turn Bluetooth
3. Open the Samsung Gear app
and tap CONNECT TO GEAR.
4. Conrm the passkey on both
devices, and then tap OK.
5. Follow the prompts to complete
the setup.
8
®
on.
Loading...