Samsung Gear IconX User Manual

CASE

PHONE

Adapter

USB Connector

Micro USB Connector

Downloading music

CASE

USB Connector

Micro USB Connector

to your IconX

Downloading music

to your IconX

Using the touchpad

from your Samsung Galaxy device

Insert earbuds into the case and close the cover.

Connect the charging case to your phone using the included USB to Micro USB cable and adapter.

Open the Gear

See diagram.

Manager app and select Gear IconX.

Click MUSIC SETTINGS then MANAGE TRACKS

Click ADD or

DELETE to manage the tracks you want to play from your earbuds.

NOTE : IconX has 3.5GB of usable onboard memory. Compatible with MP3,

WAV, WMA v9, AAC, M4A audio ﬁles. iTunes

music ﬁles are not compatible.

from your PC

Insert earbuds into the case and close the cover.

Connect the charging case

with the computer using the included USB cable.

See diagram.

On your computer’s desktop, click → COMPUTER.

Open ICONX_R or ICONX_L → TOOLS, and double-click the Gear IconX PC Manager installation ﬁle and follow on-screen instructions to complete installation.

Transfer your music ﬁles using Gear IconX PC Manager.

MAC® USERS : A Mac-compatible version of Gear IconX PC Manager is

available. Install and launch to transfer music from your Mac.

NOTE : Music ﬁles which are not transferred via the Gear IconX PC Manager

program may not be played.

NOTE : The same music ﬁles may not be saved in both earbuds when you

transfer the music ﬁles manually without using the Gear IconX PC Manager. If the music ﬁles in each earbud are different, they may not play.

Drag

Drag up or down to adjust volume

Listening safety

AMBIENT SOUND – If you’re in an environment where ambient noise can keep you safer and more aware, use your Gear Manager app to switch Ambient sound on. This allows outside sound in for a safer listening experience.

Ambient sound can also be turned off/on through the readout menu – accessible when you tap and hold the touchpad.

Tap

Double Tap

Triple Tap

Tap, Hold

& Release

- Pause/Resume

- Next song

- Receive/End a call

- Previous song

- Reject a call

- Hear readout menus

For information on using the Fitness-related features of your Gear IconX, refer to the User Guide.

©2016 Samsung Electronics America, Inc. Samsung, Samsung Gear and IconX are trademarks of Samsung Electronics Co., Ltd. Other company or product names mentioned herein are the property of their respective owners and may be trademarks or registered trademarks. Screen images simulated.

Ver. IXGSG_7.16Printed in the U.S.A.

Getting Started

Charge Pair Listen

Earbuds

Charging Case

About the Gear IconX

Multipurpose Jack

BACKSIDE

of CASE

Case LED

Charging Indicator

Cover Open

Button

Earbud

Charging

Well (L)

Earbud Charging Well (R)

Earbud LED

Charging

Indicator (L)

Earbud LED

Charging Indicator (R)

Microphone

Heart Rate Sensor

Earbud tip

Wingtip

Microphone

Touchpad

Insert earbuds into charging case and close case.

You should hear a chime from each earbud when they are inserted properly.

Gear Manager will walk you through setting up

your Gear IconX the ﬁrst

time you pair. Once this process is complete, you will hear the pairing chime through your IconX earbuds.

EARBUD CHARGING INDICATORS

Go to your music app, select a song and enjoy!

Before using your Gear IconX

Pairing your Gear IconX

Pairing to an iOS Device

Fully charge your IconX earbuds before pairing

LED indicator lights will glow red while earbuds are charging. Lights will turn green when fully charged.

NOTE : When LEDs Blink in red (Back

side/Left side/Right side), Users should check for 1) Low battery = charge the case or 2) Earbud location error = adjust position of earbuds

L R

Charge your IconX earbuds for at least 20 minutes.

Ensure proper ﬁt for best comfort and audio quality

Your Gear IconX includes a variety of eartips and wingtips. Experiment with different combinations to optimize wearing comfort and audio quality.

Download the Samsung Gear Manager to your phone

Download the Gear Manager app from Galaxy Apps or Google Play to control a variety of options and settings on your IconX from your phone. For iOS search Samsung Gear IconX in the Appstore.

Insert both buds into your ears securely

NOTE : Gear IconX will not pair until

earbuds are properly inserted into ears. Contact with the heart rate sensors automatically switches the earbuds on and puts them in pairing mode.

Earbuds do not have a power on/off switch.

Go to your Bluetooth Menu and select Gear IconX

Gear Manager will launch automatically

Listen!

Insert your earbuds as described earlier – ensuring you hear the pairing mode chime.

Go to BLUETOOTH in the SETTINGS menu on your device (a)

Your Gear IconX should be visible under Other

Devices. (b) Select it to pair.

You will hear a second chime when your earbuds are paired. (c)