Samsung F7500, BDF7500 User Manual

BD-F7500

Blu-ray

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

™

Disc Player

Safety Information

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lighting flash and Arrowhead within the triangle is a warning sign alerting you to dangerous voltage inside the product.

WARNING

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

FCC NOTE (for U.S.A)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on.

The user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

• This class B digital product meets all requirements of the Canadian Interference Causing Equipment Regulations.

Note to CATV system installer

This reminder is provided to call CATV system installer's attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within the triangle is a warning sign alerting you to important instructions accompanying the product.

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Complies with 21CFR 1040.10 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.

DANGER :

• VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)

CAUTION :

• CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM. (IEC 60825-1)

• THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1

| NOTES |

\If the Region number of a Blu-ray Disc/DVDs does not

correspond to the Region number of this player, the player cannot play the disc.

2 English

Precautions

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install

in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other apparatus (including AV receivers) that produce heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience receptacles, and the point where it exits the apparatus.

11. Only use attachments/accessories specified

by the manufacturer.

12. Use only with the cart,

stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Disc Storage & Management

• Holding Discs

- Fingerprints or scratches on a disc may reduce sound and picture quality or cause skipping.

- Avoid touching the surface of a disc where data has been recorded.

- Hold the disc by the edges so that fingerprints will not get on the surface.

- Do not stick paper or tape on the disc.

• Cleaning Discs

- If you get fingerprints or dirt on a disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

- When cleaning, wipe gently from the inside to the outside of the disc.

• Disc Storage `Do not keep in direct sunlight. `Keep in a cool ventilated area. `Keep in a clean protection jacket and store

vertically.

Handling Cautions

• Do not expose this apparatus to dripping or

splashing. Do not put objects filled with liquids, such as vases on the apparatus.

• To turn this apparatus off completely, you must

pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.

01 Safety Information

English 3

Safety Information

• Do not plug multiple electric devices into the same wall socket. Overloading a socket can cause it to overheat, resulting in a fire.

• Before connecting other components to this player, be sure to turn them off.

• If you move your player suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the player, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again.

• If the product makes an abnormal noise or produces a burning smell or smoke, turn off the power switch immediately and disconnect the power plug from the wall outlet. Then, contact the nearest customer service center for technical assistance. Do not use the product. Using the product as it is may cause a fire or an electric shock.

Using the 3D function

IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the 3D function.

• Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea, and headaches. If you experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest.

• Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses, and rest.

• A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.

• Do not use the 3D Active Glasses for other purposes (Such as general eyeglasses, sunglasses, protective goggles, etc.).

• Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects, trip, and/or fall, and cause serious injury.

• If you want to enjoy 3D content, connect a 3D device (3D compliant AV receiver or TV) to the player's HDMI OUT port using a high-speed HDMI cable. Put on 3D glasses before playing the 3D content.

• The player outputs 3D signals only through HDMI cable connected to the HDMI OUT port.

• As the video resolution in 3D play mode is fixed according to the resolution of the original 3D video, you can not change the resolution to your preference.

• Some functions such as BD Wise, screen size adjustment, and resolution adjustment may not operate properly in 3D play mode.

• You must use a high-speed HDMI cable for proper output of the 3D signal.

• Stay at least three times the width of the screen from the TV when watching 3D images. For example, if you have a 46-inch screen, stay 138 inches (11.5 feet) from the screen.

• Place the 3D video screen at eye level for the best 3D picture.

• When the player is connected to some 3D devices, the 3D effect may not function properly.

• This player does not convert 2D content into 3D.

• "Blu-ray 3D" and "Blu-ray 3D" logo are trademarks of the Blu-ray Disc Association.

Copyright

manual may be reproduced or copied without the prior written permission of Samsung Electronics Co.,Ltd.

4 English

Contents

SAFETY INFORMATION

2 Warning

3 Precautions

3 Important Safety Instructions

3 Disc Storage & Management

3 Handling Cautions

4 Using the 3D function

4 Copyright

GETTING STARTED

7 Disc and Format Compatibility

7 Disc types and contents your player can

play

7 Disc types your player cannot play

8 Region Code

8 Logos of Discs the player can play

9 Supported Formats

12 Accessories

13 Front Panel

13 Rear Panel

14 Remote Control

14 Tour of the Remote Control

CONNECTIONS

15 Connecting to a TV

16 Connecting to an Audio System

16 Method 1 Connecting to an HDMI 4K

supported AV receiver

17 Method 2 Connecting to an AV receiver

that does not support HDMI 4K using HDMI cable

18 Method 3 Connecting to an Audio System

(7.1 Channel Amplifier)

18 Method 4 Connecting to an AV receiver

with Dolby Digital or DTS decoder

19 Connecting to a Network Router

19 Wired Network

19 Wireless Network

SETTINGS

20 The Initial Settings Procedure

20 The Home Screen

21 Accessing the Settings Screen

21 Buttons on the Remote Control Used for

the Settings Menu

22 Settings Menu Functions

29 Networks and the Internet

29 Configuring Your Network Connection

32 Wi-Fi Direct

33 Upgrading Software

33 Update Now

34 Auto Update

MEDIA PLAY

35 The AllShare Play Screen

35 Accessing the AllShare Play Screen

35 Playing Commercial Discs

35 Playing Files on a USB Device

36 Playing a Disc with User Recorded

Content

37 Using the Allshare Network Function

37 To Download the Allshare Software

38 Playing Content Located on Your PC or

Allshare Device through the Blu-ray Disc Player

38 Controlling the Playback of Content

Located on Your PC with Your Smart Phone

39 Controlling Video Playback

39 Buttons on the Remote Control used for

Video Playback

39 Using the Tools Menu

41 Using the View & Options Menus

Contents

English 5

42 Controlling Music Playback

42 Buttons on the Remote Control used for

Music Playback

42 Using the View & Options Menus

43 Repeating Tracks on an Audio CD

43 Shuffling Tracks on an Audio CD

43 Creating a Playlist from an Audio CD

44 Ripping

44 Playing Photo Contents

44 Using the Tools Menu

45 Using the View & Options Menus

46 Using the Send Function

NETWORK SERVICES

47 Logging In to Your Samsung Account

47 Before Using Movies & TV Shows or

Apps

48 Using Movies & TV Shows

49 Using Apps

49 The Apps Screen at a Glance

49 Downloading Applications

50 Starting an Application

50 Using the Downloaded Screen

50 Sorting the Apps

50 Using the Edit Menu Functions

54 Screen Mirroring

54 Using the Web Browser

54 Link Browsing and Pointer Browsing

55 The Control Panel at a Glance

56 Using the Setting Menu

57 Linking Your Internet Service Accounts

to the Player

58 BD-LIVE™

APPENDIX

59 Compliance and Compatibility Notice

60 Copy Protection

60 Network Service Disclaimer

61 License

62 Additional Information

62 Notes

64 Resolution according to the contents type

65 Digital Output Selection

66 Troubleshooting

68 Repairs

69 Specifications

6 English

Getting Started

Disc and Format Compatibility

Disc types and contents your player can play

Media Disc Type Details

Blu-ray Disc

3D Blu-ray Disc

VIDEO

MUSIC

PHOTO

| NOTES |

\The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.

\If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.

\Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.

\Your player will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 25 Mbps.

\Playback may not work for some types of discs, or when you use specific functions, such as angle change and aspect ratio

adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.

\When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.

DVD-VIDEO

DVD-RW

DVD-R

DVD+RW

DVD+R

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

BD-ROM or BD-RE/-R recorded in the BD-RE format.

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have been recorded and finalized, or a USB storage media containing MKV, MP4 contents.

Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB storage media containing MP3 or WMA contents.

Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB storage media containing JPEG contents.

02 Getting Started

Disc types your player cannot play

• HD DVD

• DVD-ROM/PD/

MV, etc

• DVD-RAM

• Super Audio CD

(except CD layer)

• DVD-RW (VR mode)

• CVD/CD-ROM/CDV/

CD-G/CD-I/LD (CD-Gs play audio only, not graphics.)

• 3.9 GB DVD-R for Authoring.

English 7

Getting Started

Region Code

Both players and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play. The Region Number for this player is displayed on the rear panel of the player.

Disc Type

Blu-ray Disc

DVD-VIDEO

Region

Code

North America, Central America, South America, Korea, Japan,

Taiwan, Hong Kong and South East Asia.

Europe, Greenland, French territories, Middle East, Africa,

Australia and New Zealand.

India, China, Russia, Central and

South Asia.

The U.S., U.S. territories and

Canada

Europe, Japan, the Middle East,

Egypt, South Africa, Greenland

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

Mexico, South America, Central America, Australia,

New Zealand, Pacific Islands, Caribbean

Russia, Eastern Europe, India, most of Africa, North Korea,

Mongolia

Area

Logos of Discs the player can play

Blu-ray Disc 3D Blu-ray Disc

BD-LIVE

NTSC broadcast system in

U.S.A, Canada, Korea, Japan

8 English

China

Supported Formats

Video File Support

02 Getting Started

File Extension Container Video Codec Resolution

*.avi

*.mkv

*.asf *.wmv *.mp4

*.3gp

*.vro

*.mpg

*.mpeg

*.ts *.tp

*.trp

*.mov

*.flv

*.vob

*.svi *.m2ts

*.mts

*.webm

`Limitations

- Even when the file is encoded by a supported codec listed above, a file might not be played if its content is defective or corrupted.

- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is corrupted.

- Files having higher bit or frame rates than indicated in the table above may stutter when played back.

- The Seek (Jump) function is not available if the file’s index table is damaged.

- When you playback a file remotely through a network connection, video playback may stutter depending on the network speed.

- Some USB/Digital camera devices may not be compatible with the product.

`Video decoder

- Supports up to H.264 Level 4.1. (Does not support FMO/ASO/RS)

- Does not support VC1/AP/L4.

AVI MKV ASF MP4 3GP

MOV

FLV VRO VOB

PS TS

SVAF

WebM VP8 1920x1080

MPEG4 SP/ASP

H.264 BP/

MP/HP

Motion JPEG

Microsoft

MPEG-4 v3

Window Media Video v7,v8,v9

MPEG2

MPEG1

VP6 640x480

MVC

1920x1080

(WMV v7,v8,

MSMPEG4 v3 :

1280x720)

Frame rate

(fps)

6~30 30

24/25/30 60

6~30 20 Vorbis

Bitrate (Mbps) Audio Codec

ADPCM(IMA, MS)

Dolby Digital Plus

Dolby Digital

LPCM

AAC

HE-AAC

WMA

MPEG(MP3)

DTS (Core)

English 9

Getting Started

- CODECs except for WMVv7, v8, MSMPEG4 v3, MVC, VP6

1) Below 1280 x 720 : 60 frames max.

2) Above 1280 x 720 : 30 frames max.

- Does not support GMC 2 or higher.

- Supports SVAF (Top/Bottom, Side by Side).

- Supports BD MVC Spec.

`Audio decoder

- Supports WMA 10 PRO (Up to 5.1).

- Does not support WMA lossless audio.

- Supports ADPCM IMA,MS.

- Does not support ADPCM(A-Law, μ-Law).

- Does not support QCELP/AMR NB/WB.

- Supports vorbis (Up to 2ch).

- Supports DD+ (Up to 7.1ch)

| NOTES |

\Playback of some MKV or MP4 file may not be supported

depending on their video resolution and frame rate.

Supported Subtitle File Formats

File

Extension

.ttxt

.smi

.srt

.sub

.sub or.txt

.ssa

.ass

.psb

AVI

MKV

MP4

External

Internal

Name

MPEG-4 Timed text

SAMI

SubRip

SubViewer

Micro DVD

SubStation Alpha

Advanced SubStation

Alpha

Powerdivx

Xsub

SubStation Alpha

Advanced SubStation

Alpha

SubRip

MPEG-4 Timed text

Music File Support

File

Extension

*.mp3

*.m4a *.mpa

*.aac

*.flac

*.ogg

*.wma

*.wav

*.mid

*.midi

*.ape

Type Codec Support Range

MPEG1

MPEG

MPEG4

FLAC

OGG

WMA

wav

midi

ape

Audio

Layer 3

AAC -

FLAC Supports up to 2ch

Vorbis Supports up to 2ch

WMA

wav -

midi type 0 and type 1

ape

Supports WMA 10

Pro (Up to 5.1).

Does not support

WMA lossless audio.

Supports up to M2

profile.

Does not support

LBR mode.

Picture File Support

File Extension Type Resolution

*.jpg

*.jpeg

*.png

*.bmp

*.mpo

JPEG

PNG

BMP

MPO

15360x8640

4096x4096

15360x8640

10 English

Notes on the USB connection

• Your player supports USB storage media, MP3 players, digital cameras, and USB card readers.

• Some USB/digital camera devices may not be compatible with the player.

• Your player supports the FAT16, FAT32, and NTFS files systems.

• Connect USB devices directly to the player's USB port. Connecting through a USB cable may cause compatibility problems.

• Inserting more than one memory device into a multi-card reader may cause the reader to operate improperly.

• The player does not support the PTP protocol.

• Do not disconnect a USB device during a

"loading" process.

• The bigger the image resolution, the longer the image takes to display.

• This player cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial sites.

• Your player only supports video that is under 30fps (frame rate).

• Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives and USB HDD. (HUB is not supported.)

• Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible with this player.

• If some USB devices require excessive power, they may be limited by the circuit safety device.

• If playback from a USB HDD is unstable, provide additional power by plugging the HDD into a wall socket. If the problem continues, contact the USB HDD manufacturer.

• SAMSUNG is not responsible for any data file damage or data loss.

•

Your player does not support NTFS compressed, sparse, or encrypted files.

- You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)

AVCHD (Advanced Video Codec High Definition)

• This player can play back AVCHD format discs. These discs are normally recorded and used in camcorders.

• The AVCHD format is a high definition digital video camera format.

• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing format.

• Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that use "x.v.Color" format.

• "x.v.Color" is a trademark of Sony Corporation.

• "AVCHD" and the AVCHD logo are trademarks

of Matsushita Electronic Industrial Co., Ltd. and Sony Corporation.

| NOTES |

\Some AVCHD format discs may not play, depending on

the recording conditions. AVCHD format discs need to be finalized.

\"x.v.Color" offers a wider color range than normal DVD

camcorder discs.

02 Getting Started

English 11

Getting Started

Accessories

Check for the supplied accessories shown below.

Batteries for Remote Control (AAA Size)

(4301-000121)

Quick Setup Guide

(AK68-02232S)

User Manual

(AK68-02349A)

SOURCE

VOL VOL

– +

VOL

–

SAMSUNG TV

DISC MENU

TITLE MENU

POPUP

SMART

HOME

REPEAT

HOME

APPS

HUB

INFOTOOLS

RETURN

EXIT

A B C D

SEARCH FULLSUBTITLE

AUDIO

SCREEN

PANDORA

DIGITAL

SUBTITLE

INPUT

Remote Control

(AK59-00167A)

12 English

Front Panel

PLAY/PAUSE BUTTON

STOP BUTTON

OPEN/CLOSE BUTTON

POWER BUTTON

02 Getting Started

DISC TRAY

REMOTE CONTROL SENSOR

| NOTES |

\To upgrade the player's software through the USB Host jack, you must use a USB memory stick.

\When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on the player or the

remote control. To play the movie, you must select Play Movie or Start in the disc menu, and then press the v button on the remote control.

\To use Anynet+ (HDMI-CEC) function, connect an HDMI cable to HDMI 1 terminal.

When you connect the HDMI 2 terminal, Anynet+ (HDMI-CEC) function is not available.

USB HOST

Rear Panel

HDMI OUT LAN

DIGITAL AUDIO OUT7.1CH ANALOG AUDIO OUT

English 13

Getting Started

Remote Control

Tour of the Remote Control

After setup, allows you to set the input

(This button is only available in Samsung TV.)

Press to open and close the disc tray.

Press the number buttons to operate

Press to skip backwards or forwards.

Press to move to the Home screen.

These buttons are used both for menus

on the player and also several Blu-ray Disc

Use to access various audio functions on a

source on your TV.

Turn the player on and off.

options.

Use to enter the disc menu.

Press to stop a disc.

Press to use Apps.

Press to use the Tools menu.

Return to the previous menu.

functions.

Press to search contents.

disc.

SOURCE

VOL VOL

– +

VOL

SAMSUNG TV

DISC MENU

SMART

HOME

HUB

RETURN

A B C D

SEARCH FULLSUBTITLE

AUDIO

PANDORA

DIGITAL

SUBTITLE

VOL

–

TITLE MENU

POPUP

REPEAT

APPS

INFOTOOLS

EXIT

SCREEN

INPUT

Turn the TV on and off. (This button is only available for Samsung

TV volume adjustment. (This button is only available for Samsung TVs.)

Use to enter the Popup menu/Title menu.

Press to search backwards or forwards.

Press to pause a disc.

Press to play a disc.

Allows you to repeat a title, chapter, track or disc. Use to display the playback information.

Use to select menu items and change menu values.

Press to exit the menu.

Press to use full screen function. During the Blu-ray Disc/DVDs playback, this button does not operate.

Press to switch the Blu-ray Disc/DVD's subtitle language.

TVs.)

Installing batteries

14 English

| NOTES |

\If the remote control does not operate properly:

- Check the polarity +/– of the batteries.

- Check if the batteries are drained.

- Check if the remote sensor is blocked by obstacles.

- Check if there is any fluorescent lighting nearby.

| CAUTION |

\Dispose of batteries according to local environmental

regulations. Do not put them in the household trash.

Connections

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

Audio Video

03 Connections

| NOTES |

\To use the Anynet+ (HDMI-CEC) function, connect the HDMI cable to HDMI 1 terminal.

If you connect the cable to the HDMI 2 terminal, the Anynet+ (HDMI-CEC) function will not be available.

\HDMI 2 terminal does not output the video signal.

\If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio Out on the player

to an audio system to hear audio.

\An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

\Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

\When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first time, the player

automatically sets the HDMI output resolution to the highest supported by the TV.

\A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.

\To view video in the HDMI 720p,1080i,1080p or 2160p output mode, you must use a High speed (category 2) HDMI cable.

\HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

English 15

Connections

Connecting to an Audio System

You can connect the Blu-ray player to the audio system using the methods illustrated below.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

Method 1 Connecting to an HDMI 4K supported AV receiver

• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your receiver.

• Best quality (Recommended)

Audio/Video

HDMI 4K

supported AV

receiver

16 English

Video

Method 2 Connecting to an AV receiver that does not support HDMI 4K using HDMI cable

• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your receiver.

• Best quality (Recommended)

VideoAudio

HDMI Receiver

| CAUTION |

\Do not connect the HDMI OUT 1 and HDMI OUT 2 terminals of the product with an HDMI cable.

03 Connections

English 17

Connections

Method 3 Connecting to an Audio System (7.1 Channel Amplifier)

• Using 7.1CH audio cables (not supplied), connect the 7.1CH ANALOG AUDIO OUT terminals on the rear of the Player to the 7.1CH ANALOG AUDIO IN terminals of your Amplifier.

• Better Quality

Method 4 Connecting to an AV receiver with Dolby Digital or DTS decoder

• Using a digital Optical cable (not supplied), connect the Optical Digital Audio Out jack on the product to the Digital Optical In jack of the receiver.

• Good quality

• You will hear sound only through the front two speakers with Digital Output set to PCM.

Audio

7.1 Channel Amplifier

| NOTES |

\The front left and right outputs on your player and 7.1 channel amplifier must be connected to hear disc menu audio from

certain Blu-ray discs.

\When connecting to a 5.1 channel home theater or receiver, connect all the Analog Audio output jacks from the player

except for the Surround Back Left/Surround Back Right outputs.

18 English

Connecting to a Network Router

You can connect your player to your network router using one of the methods illustrated below.

To use the AllShare network functionality, you must connect your PC to your network as shown in the illustrations. The connection can be wired or wireless.

Wired Network

Wireless Network

03 Connections

Wireless Router

Broadband

service

Broadband modem

(with integrated router)

Broadband

Router

Broadband

modem

| NOTES |

\Your router or your Internet Service Provider's policies

may prevent the player from accessing Samsung's software update server. If this occurs, contact your Internet Service Provider (ISP) for more information.

\DSL users, please use a router to make a network

connection.

service

Broadband service

| NOTES |

\If your wireless router supports DHCP, this player can use

a DHCP or static IP address to connect to the wireless network.

\Set your wireless router to Infrastructure mode. Ad-hoc

mode is not supported.

\The player supports only the following wireless security

key protocols:

- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),

WPA2-PSK (TKIP/AES)

\Select a channel on the wireless router that is not

currently being used. If the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure.

\If you select the Pure High-throughput (Greenfield)

802.11n mode and set the Encryption type on your router to WEP, TKIP or TKIP-AES (WPS2Mixed), the player will not support a connection in compliance with new Wi-Fi certification specifications.

\Wireless LAN, by its nature, may cause interference,

depending on the operating conditions (router performance, distance, obstacles, interference by other radio devices, etc).

English 19

Settings

The Initial Settings Procedure

• The Home screen will not appear if you do not configure the initial settings.

• The OSD (On Screen Display) may change in this player after you upgrade the software version.

• The access steps may differ depending on the menu you selected.

After you have connected the player to your TV, turn on the TV and player. When you turn on the player the first time, the player's Initial Settings screen appears on the TV. The Initial Setting procedure lets you set the On Screen Display (OSD) and menu languages, the aspect ratio (screen size), the network type, and connect the player to your network. For complete Initial Settings instructions, see the Quick Setup Guide.

| NOTES |

\If you skip Network Setup during the Initial Settings

procedure, you can configure your network settings later. See "Configuring Your Network Connection" on pages 29~31 for instructions.

\If you want to display the Initial Settings screen again and

make changes, select Settings > System > Setup in the Home screen or select the Reset option. (See pages 26 or 28)

\If you want to use an Anynet+(HDMI-CEC) function,

please follow the instructions below.

1) Connect the player to an Anynet+(HDMI-CEC)compliant Samsung TV using HDMI Cable.

2) Set the Anynet+(HDMI-CEC) feature to On in both the TV and the player.

3) Set the TV to the Initial Settings Procedure.

The Home Screen

Movies & TV Shows

Apps : Gives you access to various for pay or free-

of-charge applications you can download.

Photos, Videos & Music : Lets you play photos, Videos or music content from Disc, USB, PC or

mobile devices.

Settings : Opens the player's menu where you can set various functions to suit your personal

preferences.

Web Browser : Provides access to the Internet.

Recommended Apps : Gives you direct access to

recommended applications.

Movies & TV Shows : Lets you download movies and TV Shows from the Internet.

| NOTES |

\Depending on your country, this menu function

may not be supported.

| NOTES |

If you leave the player in the stop mode for more than 5 minutes without using it, a screen saver will appear on your TV. If the player is left in the screen saver mode for

more than 20 minutes, the power will automatically turn off.

Apps Photos,

Go to Apps and connect to the network to get recommended apps.

Videos & Music

Web Browser Settings

Samsung Account d Screen Mirroring

3 4

20 English

Accessing the Settings Screen

VOL

–

SOURCE

DISC MENU

SMART

TITLE MENU

VOL VOL

POPUP

SAMSUNG TV

– +

HOME

REPEAT

1. Select Settings on the Home screen, and

then press v button. The Settings screen appears.

Settings

Display

4K Output Auto

Audio

3D Settings

Network

TV Aspect Ratio

16:9 Original

BD Wise Off

Smart Features

Resolution Auto

System

Movie Frame (24Fs) Auto

Support

DVD 24fps Conversion Off

2. To access the menus, sub-menus, and

options on the Settings screen, please refer to the remote control illustration below.

Buttons on the Remote Control Used for the Settings Menu

HOME

HUB

APPS

INFOTOOLS

Detailed Function Information

Each Settings function, menu item, and individual option is explained in detail on-screen. To view an explanation, use the ▲▼◄► buttons to select the function, menu item, or option. The explanation will usually appear on the right side of the screen. A short description of each Settings function starts on the next page. Additional information on some of the functions is also in the Appendix of this manual.

04 Settings

2 4

HOME Button : Press to move to the Home screen.

RETURN Button : Return to the previous menu.

• Press ▲▼◄► to move the cursor or select an

• Press the v button to activate the currently

RETURN

EXIT

(Enter) / DIRECTION Buttons :

item.

selected item or confirm a setting.

EXIT Button : Press to exit the current menu.

English 21

Settings

Settings Menu Functions

Display

4K Output

3D Settings

TV Aspect Ratio

BD Wise

Resolution

Movie Frame (24Fs)

This option outputs HDMI video at 4K resolution. This is only available when Movie Frame is set to Auto.

| NOTES |

To use this feature, you must connect the player to a device that supports 4K resolution and you must have content that plays at 24Fs (film speed).

Select whether to play a Blu-ray Disc with 3D contents in 3D Mode.

•

If you move to the Home or Smart Hub Home screen while in 3D mode, the player will switch to 2D automatically.

Lets you adjust the output of the player to the screen size and screen format of your TV.

BD Wise is Samsung's latest inter-connectivity feature. When you connect a Samsung player and a Samsung TV with BD Wise to each other via HDMI, and BD Wise is on in both the player and TV, the player outputs video at the video resolution and frame rate of the Blu-ray Disc/DVD.

Set the output resolution of the HDMI video signal to BD Wise, Auto, 1080p, 1080i, 720p or 480p. The number indicates the number of lines of video per frame. The i and p indicate interlaced and progressive scan, respectively. Generally, the more lines, the higher quality.

If the player is connected to a 24Fs compatible TV, setting the Movie Frame (24Fs) feature to Auto lets the player adjust its HDMI output to 24 frames per second automatically for improved picture quality.

•

You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate.

•

Movie Frame is only available when the player is in the HDMI 1080i or 1080p output resolution modes.

22 English

+ 49 hidden pages