ENG This user manual includes detailed usage instructions
for your camera. Please read this manual thoroughly.
Page 2
Copyright information
•
Microsoft Windows and the Windows logo are registered trademarks of
the Microsoft Corporation.
•
Mac and Apple App Store are registered trademarks of the Apple
Corporation.
•
Google Play Store is a registered trademark of Google, Inc.
•
Adobe, the Adobe logo, Photoshop, and Lightroom are either registered
trademarks or trademarks of Adobe Systems Incorporated in the United
States and/or other countries.
•
microSD™, microSDHC™, and microSDXC™ are registered trademarks of
the SD Association.
•
HDMI, the HDMI logo, and the term "High
Denition Multimedia Interface" are
trademarks or registered trademarks of HDMI
Licensing LLC.
•
Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are registered
trademarks of the Wi-Fi Alliance.
•
Trademarks and trade names used in this manual are the property of
their respective owners.
•
Camera specications or contents of this manual may be changed
without prior notice due to upgrade of camera functions.
•
You are not allowed to reuse or distribute any part of this manual
without prior permission.
•
We recommend using your camera within the country where you
purchase it.
•
Use this camera responsibly and adhere to all laws and regulations
concerning its use.
PlanetFirst represents Samsung Electronics' commitment to
sustainable development and social responsibility through
eco-driven business and management activities.
1
Page 3
Health and safety information
Always comply with the following precautions and usage tips to avoid
dangerous situations and ensure peak performance of your camera.
Warning—situations that could cause injury to yourself
or others
Do not disassemble or attempt to repair your camera.
You can damage the camera and expose yourself to the risk of an electric
shock.
Do not use your camera near ammable or explosive gases
and liquids.
This may cause a re or explosion.
Do not insert ammable materials into the camera or store
these materials near the camera.
This may cause a re or electric shock.
Do not handle your camera with wet hands.
This may result in an electric shock.
Prevent damage to subjects’ eyesight.
Do not use the ash in close proximity (closer than 1 m/3 ft) to people or
animals. If you use the ash too close to your subject’s eyes, this can cause
temporary or permanent eyesight damage.
Keep your camera away from small children and pets.
Keep your camera and all accessories out of the reach of small children
and animals. Small parts may cause choking or serious injury if swallowed.
Moving parts and accessories may present physical dangers as well.
Do not expose the camera to direct sunlight or high
temperatures for an extended period of time.
Prolonged exposure to sunlight or extreme temperatures can cause
permanent damage to your camera’s internal components.
Avoid covering the camera or charger with blankets or clothes.
The camera may overheat, which may distort the camera or cause a re.
Do not handle the power supply cord or the charger during a
thunderstorm.
This may result in an electric shock.
2
Page 4
Health and safety information
If liquid or foreign objects enter your camera, immediately
disconnect all power sources, such as the battery or charger,
and then contact a Samsung service center.
Comply with any regulations that restrict the use of a camera
in a certain area.
•
Avoid interference with other electronic devices.
•
Turn o the camera when in an aircraft. Your camera can cause
interference with aircraft equipment. Follow all airline regulations and
turn o your camera when directed by airline personnel.
•
Turn o the camera near medical equipment. Your camera can interfere
with medical equipment in hospitals or health care facilities. Follow all
regulations, posted warnings, and directions from medical personnel.
Avoid interference with pacemakers.
Maintain a safe distance between this camera and all pacemakers to
avoid potential interference, as recommended by the manufacturer and
research groups. If you have any reason to suspect that your camera is
interfering with a pacemaker or other medical device, turn o the camera
immediately and contact the manufacturer of the pacemaker or medical
device for guidance.
Caution—situations that could cause damage to your
camera or other equipment
Remove the batteries from your camera when storing it for an
extended period of time.
Installed batteries may leak or corrode over time and cause serious
damage to your camera.
Use only authentic, manufacturer-recommended,
Lithium-ion replacement batteries. Do not damage or heat the
battery.
Inauthentic, damaged, or heated batteries may cause a re or personal
injury.
Use only Samsung-approved batteries, chargers, cables, and
accessories.
•
Using unauthorized batteries, chargers, cables, or accessories can cause
batteries to explode, damage your camera, or cause injury.
•
Samsung is not responsible for damage or injuries caused by
unapproved batteries, chargers, cables, or accessories.
Use the battery only for its intended purpose.
Misusing the battery may cause a re or electric shock.
3
Page 5
Health and safety information
Do not touch the ash while it res.
The ash is very hot when red and may burn your skin.
When you use the AC charger, turn o the camera before you
disconnect the power to the AC charger.
Failing to do so may result in re or electric shock.
Disconnect the charger from the wall socket when not in use.
Failing to do so may result in re or electric shock.
Do not use a damaged power supply cord, plug, or loose outlet
when you charge batteries.
This may cause a re or electric shock.
Do not allow the AC charger to come in contact with the +/terminals on the battery.
This may cause a re or electric shock.
Do not drop or subject the camera to strong impacts.
Doing so may damage the screen or external or internal components.
Exercise caution when you connect cables and install batteries
and memory cards.
If you force the connectors, improperly connect cables, or improperly
install batteries and memory cards, you can damage ports, connectors,
and accessories.
Keep cards with magnetic strips away from the camera case.
Information stored on the card may be damaged or erased.
Never use a damaged battery or memory card.
This may result in electric shock or camera malfunction or cause a re.
Do not place the camera in or near magnetic elds.
Doing so may cause the camera to malfunction.
Do not use the camera if the screen is damaged.
If the glass or acrylic parts are broken, visit a Samsung service center to
have the camera repaired.
4
Page 6
Health and safety information
Check that the camera is operating properly before use.
The manufacturer takes no responsibility for any loss of les or damage
that may result from camera malfunction or improper use.
You must plug the small end of the USB cable into your
camera.
If the cable is reversed, it may damage your les. The manufacturer is not
responsible for any loss of data.
Do not expose the lens to direct sunlight.
This may discolor the image sensor or cause it to malfunction.
If the camera overheats, remove the battery and allow it to
cool down.
•
Prolonged usage of the camera may overheat the battery and raise
the internal temperature of the camera. If the camera stops operating,
remove the battery and allow it to cool down.
•
High internal temperatures may result in noise in your photos. This is
normal and does not aect your camera’s overall performance.
Avoid interference with other electronic devices.
Your camera emits radio frequency (RF) signals that may interfere
with unshielded or improperly shielded electronic equipment, such as
pacemakers, hearing aids, medical devices, and other electronic devices in
homes or vehicles. Consult the manufacturers of your electronic devices
to solve any interference problems you experience. To prevent unwanted
interference, use only Samsung-approved devices or accessories.
Use your camera in the normal position.
Avoid contact with your camera’s internal antenna.
Data transference and your responsibilities
•
Data transferred via WLAN could be leaked, so avoid transferring
sensitive data in public areas or on open networks.
•
The camera manufacturer is not liable for any data transfers that infringe
on copyrights, trademarks, intellectual property laws, or public decency
ordinances.
5
Page 7
Icons used in this manual
Icons used in this manual
IconFunction
Additional information
Safety warnings and precautions
[ ]
( )
Camera buttons. For example, [Shutter] represents the
shutter button.
Page number of related information
The order of options or menus you must select to perform
a step; for example: Select b
Index ............................................................................................................ 183
12
Page 14
Concepts in Photography
Shooting postures
A correct posture for stabilizing the camera is necessary for taking a good
photo. Even if you hold a camera correctly, the wrong posture can cause
the camera to shake. Stand up straight and remain still to maintain a
steady base for your camera. When shooting with a slow shutter speed,
hold your breath to minimize body movement.
Holding the camera
Hold the camera with your right hand and place your right index nger on
the shutter button. Place your left hand under the lens for support.
13
Page 15
Concepts in Photography
Standing photography
Compose your shot, stand up straight with your feet shoulder-length
apart, and keep your elbows pointed down.
Crouching photography
Compose your shot, crouch with one knee touching the ground, and keep
a straight posture.
14
Page 16
Concepts in Photography
Aperture
The aperture is one of the three factors that determine the exposure. The
aperture housing contains thin, metal plates that open and close to let
light through the aperture and into the camera. The size of the aperture
is related to the amount of light: a larger aperture allows more light and a
smaller aperture allows less light.
Aperture sizes
Minimum apertureMedium aperture Maximum aperture
The size of the aperture is represented by a value known as an "F-number."
The f-number represents the focal length divided by the diameter of the
lens. For example, if a lens with a 50 mm focal length has an f-number of
F2, the diameter of the aperture is 25 mm. (50 mm/25 mm = F2)
The smaller the f-number, the greater the size of the aperture.
The opening in the aperture is described as the Exposure Value (EV).
Increasing the Exposure Value (+1 EV) means the amount of light doubles.
Decreasing the Exposure Value (-1 EV) means the amount of light halves.
You can also use the exposure compensation feature to ne-tune the
amount of light by subdividing exposure values into 1/2, 1/3 EV, and so on.
+1 EV
F1.4F2F2.8F4F5.6F8
-1 EV
Exposure Value Steps
Aperture opened slightlyAperture opened wide
15
Page 17
Concepts in Photography
Aperture value and the depth of eld
You can blur or sharpen the background of a photo by controlling the
aperture. It is closely related to the depth of eld (DOF), which can be
expressed as small or large.
A photo with a large DOF A photo with a small DOF
The aperture housing contains several blades. These blades move together and
control the amount of light passing through the center of the aperture. The
number of blades also aects the shape of light when shooting night scenes. If
an aperture has an even number of blades, light divides into an equal number
of sections. If the number of blades is odd, the number of sections is double the
number of blades.
For example, an aperture with 8 blades divides light into 8 sections and an
aperture with 7 blades into 14 sections.
7 blades 8 blades
16
Page 18
Concepts in Photography
Shutter speed
Shutter speed refers to the amount of time it takes to open and close the
shutter. It controls the amount of light which passes through the aperture
before it reaches the image sensor.
Usually, the shutter speed is manually adjustable. The measurement of the
shutter speed is known as the "Exposure Value" (EV), which is marked in
intervals of 1 s, 1/2 s, 1/4 s, 1/8 s, 1/15 s, 1/1,000 s, 1/2,000 s, and so on.
+1 EV
Exposure
-1 EV
Therefore, the faster the shutter speed, the less light will be let in. Likewise,
the slower the shutter speed, the more light will be let in.
The photos below illustrate that a slow shutter speed allows more time
for light to enter the camera. This adds a motion blurring eect to moving
objects. On the other hand, a fast shutter speed allows less time to let light
in and the photo more easily freezes subjects in motion.
0.8 s0.004 s
1 s1/2 s1/4 s1/8 s1/15 s1/30 s
Shutter speed
17
Page 19
Concepts in Photography
ISO sensitivity
The exposure of an image is determined by the sensitivity of the camera.
This sensitivity is based on international lm standards, known as ISO
standards. On digital cameras, this sensitivity rating is used to represent
the sensitivity of the digital mechanism that captures the image.
ISO sensitivity doubles as the number doubles. For example, an
ISO 200 setting is capable of capturing images at twice the speed of an
ISO 100 setting. However, higher ISO settings can result in "noise"—small
specks, spots, and other phenomena in a photo that give the shot a noisy
or dirty appearance. As a general rule, it is best to use a low ISO setting
to prevent noise in your photos, unless you are shooting in darkened
environments or at night.
Because a low ISO sensitivity means the camera will be less sensitive to
light, you need more light to have an optimal exposure. When using a low
ISO sensitivity, open the aperture more or reduce the shutter speed to
allow more light to enter the camera. For example, on a sunny day when
light is abundant, a low ISO sensitivity does not require a slow shutter
speed. However, in a dark place or at night, a low ISO sensitivity will
result in a blurry photo. Therefore, it is recommended to increase the ISO
sensitivity by a moderate amount.
A photo captured with a tripod and high
ISO sensitivity
A blurred photo with a low ISO sensitivity
Changes in the quality and brightness according to ISO sensitivity
18
Page 20
Concepts in Photography
How the aperture setting, shutter speed,
and ISO sensitivity control exposure
The aperture setting, shutter speed, and ISO sensitivity are closely
interconnected in photography. The aperture setting controls the opening
that regulates the light that enters the camera, while the shutter speed
determines the length of time that light is allowed to enter. ISO sensitivity
determines the speed at which the lm reacts to light. Together, these
three aspects are described as the triangle of exposure.
A change in shutter speed, aperture value, or ISO sensitivity can be oset
by adjustments to the others to maintain the amount of light. The results,
however, change according to the settings. For example, shutter speed is
useful in expressing movement, aperture can control the depth of eld,
and ISO sensitivity can control the graininess of a photo.
SettingsResults
Wide aperture
Aperture
value
= more light
Narrow aperture
= less light
Shutter speed
ISO sensitivity
SettingsResults
Fast speed
= less light
Slow speed
= more light
Fast = still
Slow = blurry
High sensitivity
= more sensitive to light
Low sensitivity
= less sensitive to light
High = more grainy
Low = less grainy
Wide = small depth of eld
Narrow = large depth of eld
19
Page 21
Concepts in Photography
Correlation between focal length, angle,
and perspective
Focal length, which is measured in millimeters, is the distance between
the middle of the lens to its focal point. It aects the angle and perspective
of captured images. A short focal length translates into a wide angle,
which allows you to capture a wide shot. A long focal length translates
into a narrow angle, which allows you to capture telephoto shots.
Short focal length
wide-angle lens
wide shot
wide angle
Long focal length
telephoto lens
telephoto shot
narrow angle
Look at these photos below and compare the changes.
16 mm angle50 mm angle200 mm angle
Normally, a lens with a wide angle is suitable for shooting landscapes and a lens
with a narrow angle is recommended for shooting sports events or portraits.
20
Page 22
Concepts in Photography
Depth of eld
Portraits or still-life photos mostly acclaimed by people are the ones on
which the background is out of focus so the subject looks pronounced.
Depending on the focused areas, a photo can be blurred or sharpened.
This is called 'a low DOF' or 'a high DOF'.
The depth of eld is the focused area around the subject. Therefore, a
small DOF signies that the focused area is narrow and a large DOF means
the focused area is wide.
A photo with a small DOF, which stresses the subject and makes the rest
of it blurred, can be obtained by using a telescope lens or selecting a low
aperture value. Conversely, a photo with a large DOF which shows all the
elements on the photo sharply focused can be achieved by using a wide
angle lens or selecting a high aperture value.
What controls out-of-focus eects?
DOF depends on aperture value
The wider the aperture is (namely the lower the aperture value), the lower
the DOF becomes. Under the condition where the focal length is equal, a
low aperture value leads to a photo with a low DOF.
50 mm F5.750 mm F22
Small Depth of FieldLarge Depth of Field
21
Page 23
Concepts in Photography
DOF depends on focal length
The longer the focal length is, the lower the DOF gets. A telescope lens
with a longer focal length than a wide-angle lens with a short focal length
is better to capture a photo of a low DOF.
A photo captured with a 16 mm wide-angle lens
DOF depends on the distance between the subject and the
camera
The shorter the distance between the subject and the camera is, the lower
the DOF gets. Therefore, taking a photo close to a subject can result in a
photo of low DOF.
A photo captured with a 100 mm telescope lens
A photo captured with a 100 mm telescope lens
A photo captured close to the subject
22
Page 24
Concepts in Photography
DOF preview
You can press the Custom button to get an idea of what your shot will look
like before shooting. The camera adjusts the aperture to the predened
settings and shows the results on the screen. Set the function of the
Custom button to Optical Preview. (p. 139)
Composition
It is fun to capture a photo of the beauty of world with a camera. No
matter how the world is beautiful, however, a poor composition cannot
capture the beauty of it.
When it comes to composition, it is very important to prioritize subjects.
Composition in photography means arranging objects in a photo. Usually,
abiding by the rule of thirds leads to a good composition.
Rule of Thirds
To use the rule of thirds, divide the image into a 3x3 pattern of equal
rectangles.
To compose photos that best emphasize the subject, make sure the
subject is located at one of the corners of the center rectangle.
23
Page 25
Concepts in Photography
Using the rule of thirds will create photos with stable and compelling
compositions. Below are a few examples.
Photos with two subjects
If your subject is in one corner of the photo, it creates an unbalanced
composition. You can stabilize the photo by capturing a second subject in
the opposite corner to balance the weight of the photo.
Subject 2
Subject 1
UnstableStable
Subject 1
Subject 2
24
Page 26
Concepts in Photography
When taking landscape photos, centering the horizon will create an
unbalanced eect. Give more weight to the photo by moving the horizon
up or down.
Subject 1
Subject 1
Subject 2
Subject 2
UnstableStable
Flash
Light is one of the most important components in photography. It is not
easy, however, to have an enough amount of light anytime and anywhere.
Making use of a ash allows you to optimize light settings and create a
variety of eects.
Flash, also known as strobe or speed light, helps to create adequate
exposure in low-light conditions. It is also useful in light-abundant
situations. For example, ash can be used in compensating the exposure
of a subject’s shadow or capturing clearly both the subject and the
background in backlit conditions.
Before correctionAfter correction
25
Page 27
Concepts in Photography
Flash guide number
The model number of a ash refers to the ash’s power, and the maximum
amount of light created is represented by a value known as a "guide
number". The bigger the guide number, the more light is emitted from the
ash. The guide number is achieved by multiplying the distance from the
ash to the subject and the aperture value when the ISO sensitivity is set
to 100.
Guide number = Flash to Subject Distance X Aperture value
Aperture value = Guide number/Flash to Subject Distance
Flash to Subject Distance = Guide number/Aperture value
Therefore, if you know the guide number of a ash, you can estimate an
optimum ash to subject distance when setting the ash manually. For
example, if a ash has a guide number of GN 20 and is 4 meters away from
the subject, the optimal aperture value is F5.0.
Bounce Photography
Bounce photography refers to the method of bouncing light o of the
ceiling or walls so that the light spreads evenly over the subject. Normally,
photos captured with ash may appear unnatural and cast shadows.
Subjects in photos captured with bounce photography cast no shadows
and look smooth due to evenly spread light.
26
Page 28
Chapter 1
My Camera
Learn about your camera’s layout, display icons, lens, optional accessories,
The illustrations may dier from your actual items.
•
You can purchase optional accessories at a retailer or a Samsung service center. Samsung is not responsible for any
problems caused by using unauthorized accessories. For information about accessories, refer to page 182.
28
Page 30
My Camera
Camera layout
1
2
3
4
5
6
5
7
8
9
13
12
11
10
No.Name
Mode dial
• t: Smart Auto mode (p. 52)
• P: Program mode (p. 54)
• A: Aperture Priority mode (p. 56)
• S: Shutter Priority mode (p. 57)
1
• M: Manual mode (p. 58)
• s: Smart mode (p. 60)
• R: Panorama mode (p. 62)
• B: Wireless Network (p. 113)
Shutter button
2
Power button
3
MOBILE button
Select a Wi-Fi function to connect with
4
your mobile device. (p. 31)
Microphone
5
Hot-shoe
6
No.Name
Speaker
7
NFC tag
8
Lens release button
9
Image sensor
10
Lens mount
11
Lens mount index
12
AF-assist light/Timer lamp
13
29
Page 31
My Camera > Camera layout
11
10
No.Name
Video recording button
1
2
3
4
5
6
9
8
7
1
Start recording a video.
Eyelet for camera strap
2
Internal antenna
* Avoid contact with the internal antenna while
3
using a wireless network.
f button
Access the Smart panel and ne-tune
4
some settings.
o button
• In the Menu screen: Save the selected
5
6
7
options.
• In Shooting mode: Allow you to select
a focus area manually in some shooting
modes.
Delete/Custom button
• In Shooting mode: Perform the
assigned function. (p. 139)
• In Playback mode: Delete les.
Playback button
Enter Playback mode to view pictures or
videos.
No.Name
Navigation button (Smart dial)
• In Shooting mode:
- D: Change the information on the
display.
- I: Select the shutter speed,
aperture value, exposure compensation,
or ISO sensitivity.
8
9
10
11
- C: Select a shooting method or set the
timer.
- F: Select an AF mode.
• In Playback mode:
- I: View thumbnails.
• In other situations: Move up, down,
left, right, respectively. (You can also
rotate the navigation button.)
m button
Access options or menus.
Status lamp
Indicate the status of the camera.
• Blinking: When saving a photo,
shooting a video, sending data to a
computer, connecting to WLAN, or
sending a photo.
• Steady: When there is no data transfer
or charging the battery.
Display
To take a self-portrait while looking at
yourself on the screen, ip the screen up.
(p. 32)
30
Page 32
My Camera > Camera layout
4
3
No.Name
HDMI port
1
USB port
2
1
2
Connect the camera to a computer.
Battery chamber/Memory card cover
3
Insert a memory card and battery.
Tripod mount
4
Using the MOBILE button
Select a Wi-Fi function that connects to a smart phone by pressing [].
Press [
] again to return to the previous mode.
31
Page 33
My Camera > Camera layout
Using the display
You can take a self-portrait while looking at yourself on the display by
ipping the display up.
Using the Self shot mode
Half-press [Shutter] to focus, and then press [Shutter].
2
•
After 3 seconds, the camera automatically releases the shutter.
•
When the camera is o, ipping the display upward automatically turns the
camera on.
•
Keep the display closed when the camera is not in use.
When the camera is o and you enabled the Self shot option (p. 140),
ipping the display upward turns the camera on and enters Self shot
mode.
In Self shot mode, the timer (3 seconds), face detection, and beauty face
functions are automatically activated.
Press [o] to change the face detection option. Press [n] to deactivate or
activate the beauty face function.
Flip the display upward.
1
180˚
•
Flip the display only within the angle allowed. Failing to do so may damage
your camera.
•
When the camera is not held and the display is ipped upward, use a tripod.
Otherwise, it may cause damage to your camera.
•
Do not ip the display up when an external ash is mounted on the camera.
Otherwise, it may cause damage to your camera.
32
Page 34
My Camera
Inserting the battery and memory card
Learn how to insert or remove the battery and an optional memory card
into the camera.
Insert a memory card with the
gold-colored contacts facing up.
Memory card
Insert the battery with the goldcolored contacts facing left.
Removing the battery and memory card
Slide the lock up to release the
battery.
Battery lock
Rechargeable battery
Push the card gently until it
disengages from the camera, and
then pull it out of the slot.
Memory card
Using the memory card adapter
Rechargeable battery
To read data with a PC or memory card reader, insert the memory
card into a memory card adapter.
While the status lamp of the camera is blinking, do not remove the memory card
or battery. Doing so may damage the data stored on the memory card or your
camera.
33
Page 35
My Camera
Charging the battery and turning on your camera
Charging the battery
Before you use the camera for the rst time, you must charge the battery.
Plug the small end of the USB cable into your camera, and then plug the
other end of the USB cable into the AC adapter.
Status lamp
• Red light on: Charging
• Green light on: Fully charged
• Red light blinking: Charging error
Turning on your camera
To turn on or o the camera, press [ ].
•
The initial setup screen appears when you turn on the camera for the
rst time. (p. 35)
Use only the AC adapter and USB cable supplied with your camera. If you use
another AC adapter, the camera battery may not charge or work properly.
34
Page 36
My Camera
Performing the initial setup
When you turn on your camera for the rst time, the initial setup screen
appears. The language is preset for the country or region where the
camera is sold. You can change the language as desired.
Press [I] to select Time Zone, and then press [o].
1
Press [D/I] to select a time zone, and then press [o].
2
Time Zone
[GMT +00:00] London
[GMT -01:00] Cape Verde
[GMT -02:00] Mid-Atlantic
[GMT -03:00] Buenos Aires, Sao Paulo
[GMT -03:30] Newfoundland
BackSet
Press [I] to select Date/Time Set, and then press [o].
3
Press [C/F] to select an item (Year/Month/Day/Hour/
4
Minute/Summer time).
Press [D/I] to set the option, and then press [o].
5
Date/Time Set
YearHour MinDSTMonth Day
BackSet
•
The screen may dier depending on the language you selected.
Press [I] to select Date Type, and then press [o].
6
Press [D/I] to select a date type, and then press [o].
7
Date Type
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY
BackSet
35
Page 37
My Camera > Performing the initial setup
Press [I] to select Time Type, and then press [o].
8
Press [D/I] to select a time type, and then press [o].
9
Time Type
12 Hr
24 Hr
BackSet
Press [m] to nish the initial setup.
10
36
Page 38
My Camera
Selecting functions (options)
Rotate the navigation button or press [D/I/C/F] to move, and
then press [o] to select an option.
Using m
Press [m], and then change shooting options or settings.
E.g. Selecting the photo size in P mode
Rotate the mode dial to P.
1
Press [m].
2
Press [C], rotate the navigation button or press [D/I]
3
to move to b, and then press [o].
Rotate the navigation button or press [D/I] to move
4
to Photo Size, and then press [o].
AutoShare
Photo Size
Quality
ISO
Minimum Shutter Speed
BackSelect
37
Page 39
My Camera > Selecting functions (options)
Rotate the navigation button or press [D/I] to move
5
to an option, and then press [o].
•
Press [m] to go back to the previous menu.
Photo Size
(3:2) (5472x3648)
(3:2) (3888x2592)
(3:2) (2976x1984)
(3:2) (1728x1152)
(16:9) (5472x3080)
BackSet
Press [m] to switch to Shooting mode.
6
Using the Smart panel
Press [f] to access some functions such as Exposure, ISO, and White
Balance.
E.g. Adjust the exposure value in P mode
Rotate the mode dial to P.
1
Press [f].
2
Press [D/I/C/F] to move to EV, and then press [o].
3
•
You can directly select an option by rotating the navigation button
without having to press [o].
EV : 0
AdjustBack
Rotate the navigation button or press [C/F] to adjust the
4
exposure value, and then press [o].
38
Page 40
My Camera > Selecting functions (options)
Using iFn
Press [i-Function] on an i-Function lens to manually select and adjust
shutter speed, aperture value, exposure value, ISO sensitivity, and White
Balance on the lens.
Rotate the mode dial to P, A, S, or M.
1
Press [i-Function] on the lens to select a setting.
2
•
To select items to appear, select [m] ĺ d ĺ iFn Customizing
ĺ
an item.
•
You can also press [i-Function], and then press [D/I] to
select a setting.
OptionDescription
Aperture
Shutter Speed
EV
ISO
White Balance
Adjust the focus ring to select an option.
3
•
You can also rotate the navigation button.
Half-press [Shutter] to focus, and then press [Shutter] to
4
Adjust the aperture value.
Adjust the shutter speed.
Adjust the exposure value.
Adjust the ISO sensitivity.
Select a White Balance option.
capture the photo.
39
Page 41
My Camera > Selecting functions (options)
Available options
Shooting modePASM
Aperture
-O-O
Shutter Speed
EV
ISO
White Balance
--OO
OOO -
OOOO
OOOO
40
Page 42
My Camera
Display icons
In Shooting mode
Capturing photos
1. Shooting information
IconDescription
Shooting mode
Current date
Current time
Focal length*
Auto exposure lock
(p. 96)
Available number of
photos
Memory card inserted
Memory card not
inserted**
IconDescription
• : Fully charged
• : Partially
1
2
* This icon appears when you attach the Power Zoom lens.
** Photos that were captured without inserting a memory
card cannot be transferred to a memory card or a computer.
charged
• (Red): Empty
(recharge the battery)
• : Charging
Auto focus frame
Spot metering area
Camera shake
Manual focus scale
Level gauge (p. 42)
Histogram (p. 138)
Focus
Shutter speed
Aperture value
Exposure adjustment
value
ISO sensitivity (p. 69)
2. Shooting options
IconDescription
Photo size
Drive mode
Flash (p. 88)
Flash intensity adjustment
Metering (p. 90)
AF mode (p. 73)
Face detection
Beauty face***
Focus area
White Balance (p. 70)
White Balance micro adjustment
Optical Image Stabilization (OIS) (p. 82)
RAW le
Dynamic Range (p. 93)
*** This icon appears when the camera enters Self shot mode
by ipping the display upward.
The icons displayed will change according to the
mode you select or the options you set.
41
Page 43
My Camera > Display icons
Recording videos
1. Shooting information
IconDescription
Shooting mode
Current recording time/
Available recording time
Multi Motion (p. 98)
Playback time after applying the
Multi Motion feature
Memory card inserted
• : Fully charged
• : Partially charged
• (Red): Empty (recharge
the battery)
• : Charging
2. Shooting options
1
IconDescription
2
Video size
AF mode (p. 73)
Metering (p. 90)
White Balance (p. 70)
White Balance micro adjustment
Optical Image Stabilization (OIS) (p. 82)
Fader (p. 99)
Voice recording o (p. 99)
The icons displayed will change according to the
mode you select or the options you set.
About the level gauge
The level gauge helps you align the camera with
the horizontal and vertical lines on the display.
If the level gauge is not level, calibrate the level
gauge using the Horizontal Calibration function.
(p. 141)
Vertical
Horizontal
Ÿ
Level
You cannot use the level gauge when you shoot
in portrait orientation.
Ÿ
Unlevel
Exposure value
ISO sensitivity (p. 69)
42
Page 44
My Camera > Display icons
In Playback mode
Viewing photos
Mode
F No
Shutter
ISO
Metering
Flash
Focal Length
White Balance
EV
Photo Size
Date
IconDescription
Current le/The total number of les
Folder number-File number
RAW le
Protected le
Continuously captured photos (they
will appear as a folder) (p. 102)
Information
No.Description
Captured photo
1
RGB histogram (p. 138)
2
Shooting mode, Metering, Flash,
White Balance, Aperture value,
3
Shutter speed, ISO, Focal length,
Exposure value, Photo size, Date
1
Playing videos
2
3
Stop Play
IconDescription
Current le/The total number of les
Playback speed
Folder number-File number
Multi Motion
Current playback time
Video length
43
Page 45
My Camera > Display icons
Changing the information displayed
Press [D] repeatedly to change the display type.
ModeDisplay type
• Basic shooting information (Shooting mode, Shutter
speed, Aperture value, Exposure value, ISO sensitivity, etc.)
• Basic shooting information + Level gauge
Shooting
• Basic shooting information + Current shooting options
information (Photo size, Drive mode, Flash, Metering, AF
mode, etc.)
• Basic shooting information + Current shooting options
information + Histogram + Date and time
Playback
• Basic information
• Display all information about the current le.
• Display all information about the current le including
RGB histogram.
44
Page 46
My Camera
Lenses
You can purchase optional lenses made exclusively for your NX series
camera.
Learn about the functions of each lens and select one that suits your needs
and preferences.
Lens layout
SAMSUNG 16-50 mm F3.5-5.6 Power Zoom ED OIS lens (example)
1
2
3
4
5
6
No.Description
i-Function button (p. 39)
1
Lens mount index
2
Focus ring
3
Lens
4
Zoom button
5
• Press the zoom button to adjust the zoom ratio.
Lens contacts
6
When not using the lens, attach the lens cap and lens mount cover to protect
the lens from dust and scratches.
45
Page 47
My Camera > Lenses
SAMSUNG 20-50 mm F3.5-5.6 ED II lens (example)
1
2
6
3
5
4
No.Description
Lens mount index
1
Zoom lock switch
2
Lens
3
Focus ring (p. 81)
4
Locking or unlocking the lens
7
To lock the lens, pull and hold the zoom lock switch away from the camera
body and rotate the zoom ring as shown in the illustration.
To unlock the lens, rotate the zoom ring as shown in the illustration until
you hear the click.
i-Function button (p. 39)
5
Zoom ring
6
Lens contacts
7
You cannot capture a photo when the lens is locked.
46
Page 48
My Camera > Lenses
SAMSUNG 16 mm F2.4 lens (example)
1
2
3
4
No.Description
i-Function button (p. 39)
1
Lens mount index
2
Focus ring (p. 81)
3
Lens
4
Lens contacts
5
5
47
Page 49
My Camera > Lenses
Lens markings
Find out what the numbers on the lens signify.
SAMSUNG 18-200 mm F3.5-6.3 ED OIS lens (example)
1
2345
No.Description
Aperture value
A range of supported aperture values. For example, 1:3.5–6.3 means
1
the maximum aperture value range from 3.5 to 6.3.
Focal length
The distance from the middle of the lens to its focal point (in
millimeters). This gure is expressed in a range: minimum focal length
2
to maximum focal length of the lens.
Longer focal lengths result in narrower angles of view and the subject
is magnied. Shorter focal lengths result in wider angles of view.
ED
ED stands for Extra-low Dispersion. Extra-low dispersion glass is
3
eective in minimizing chromatic aberration (a distortion that occurs
when a lens fails to focus all colors to the same convergence point).
OIS (p. 82)
Optical Image Stabilization. Lenses with this feature can detect
4
camera shake and eectively cancel out the movement inside the
camera.
Ø
The lens diameter. When you attach a lter to the lens, make sure that
5
the diameters of the lens and the lter are the same.
48
Page 50
My Camera
Accessories
You can use accessories such as external ash that can help you capture
better and more convenient photos.
For more information about optional accessories, refer to the manual for
each accessory.
•
The illustrations may dier from the actual items.
•
You can purchase Samsung-approved accessories at a retailer or a Samsung
service center. Samsung is not responsible for damage caused by using
another manufacturer's accessories.
External ash layout
SEF8A (example) (optional)
No.Description
Lamp
1
Hot shoe fastening dial
2
Hot shoe connection
3
1
2
3
49
Page 51
My Camera > Accessories
Connecting the external ash
Mount the ash by sliding it into the hot-shoe.
1
Lock the ash into place by turning the hot-shoe fastening dial
2
clockwise.
Lift up the ash for use.
3
•
You can capture a photo with a ash that is not fully charged, but it is
recommended to use a fully charged ash.
•
The available options may dier depending on the shooting mode.
•
There is an interval between two bursts of the ash. Do not move until the
ash res a second time.
•
SEF8A may not be compatible with other NX series cameras.
•
For more details about optional ashes, refer to the user manual for the ash.
Use only Samsung-approved ashes. Using incompatible ashes may damage
your camera.
50
Page 52
My Camera
Shooting modes
Two simple shooting modes—Smart Auto and Smart mode—help you
capture photos with numerous automatic settings. Additional modes
allow for greater customization of settings.
IconDescription
t
P
A
S
M
s
R
B
Smart Auto mode (p. 52)
Program mode (p. 54)
Aperture Priority mode (p. 56)
Shutter Priority mode (p. 57)
Manual mode (p. 58)
Smart mode (p. 60)
Panorama mode (p. 62)
Wireless Network (p. 113)
51
Page 53
My Camera > Shooting modes
t Smart Auto mode
Rotate the mode dial to t.
1
In Smart Auto mode, the camera recognizes surrounding conditions
and automatically adjusts factors that contribute to exposure, including
shutter speed, aperture value, metering, White Balance, and exposure
compensation. As the camera controls most of the functions, some
shooting functions are limited. This mode is useful for capturing quick
snapshots with the least amount of adjustment.
Align your subject in the frame.
2
Half-press [Shutter] to focus.
3
•
The camera selects a scene. An appropriate scene icon appears at
the screen.
52
Page 54
My Camera > Shooting modes
Recognizable scenes
IconDescription
Landscapes
Scenes with bright white backgrounds
Landscapes at night
Portraits at night
Landscapes with backlighting
Portraits with backlighting
Portraits
Close-up photos of objects
Close-up photos of text
Sunsets
Indoors, dark
Partially lit
Close-up with spot lighting
Portraits with spot lighting
Blue skies
IconDescription
Forested areas typically consist of green-colored subjects
Close-up photos of colorful subjects
Camera is stabilized on a tripod and the subject is not moving for a
certain period of time (when shooting in the dark).
Actively moving subjects
Press [Shutter] to capture the photo.
4
•
The camera may detect dierent scenes, even the same subjects, depending
on external factors such as camera shake, lighting, or distance to the subject.
•
If the camera does not recognize an appropriate scene mode, it uses the
default settings for t mode.
•
Even if it detects a face, the camera may not select a portrait mode
depending on the subject's position or lighting.
•
Even if you use a tripod, the camera may not detect the tripod mode ( ) if
the subject is moving.
•
The camera consumes more battery power, because it changes settings often
to select appropriate scenes.
53
Page 55
My Camera > Shooting modes
P Program mode
Rotate the mode dial to P.
1
The camera automatically adjusts shutter speed and aperture value so that
an optimal exposure value can be achieved.
This mode is useful when you want to capture shots of constant exposure
while being able to adjust other settings.
Set the desired options.
2
Half-press [Shutter] to focus, and then press [Shutter] to
3
capture the photo.
54
Page 56
My Camera > Shooting modes
Program Shift
Program Shift function lets you adjust the shutter speed and aperture
value while the camera maintains the same exposure. Press [I] to
select the shutter speed and aperture value and rotate the navigation
button to adjust the aperture value. The shutter speed will change
according to the aperture value.
Minimum shutter speed
Set the shutter speed not to be slower than the selected speed. However, if
an optimal exposure value cannot be achieved because the ISO sensitivity
reached the maximum ISO value that is set by Auto ISO Range, shutter
speed may be slower than the selected minimum shutter speed.
To set the minimum
shutter speed,
•
This feature is available only when the ISO sensitivity is set to Auto.
•
This feature is available only in Program or Aperture Priority mode.
In Shooting mode, press [m] ĺ b ĺ Minimum Shutter Speed
ĺ
an option.
55
Page 57
My Camera > Shooting modes
A Aperture Priority mode
Rotate the mode dial to A.
1
In Aperture Priority mode, the camera automatically calculates shutter
speed according to the aperture value you choose.
You can adjust the depth of eld (DOF) by changing the aperture value.
This mode is useful for taking portraits, owers, or landscape shots.
Large Depth of Field Small Depth of Field
Press [I] to select the aperture value.
2
Rotate the navigation button to adjust the aperture value.
3
Set the desired options.
4
Half-press [Shutter] to focus, and then press [Shutter] to
5
capture the photo.
•
In low-light settings, you may need to increase the ISO sensitivity to prevent
blurred photos.
•
To set the minimum shutter speed, in Shooting mode, press [m] ĺ b ĺ
Minimum Shutter Speed
ĺ
an option.
56
Page 58
My Camera > Shooting modes
S Shutter Priority mode
Rotate the mode dial to S.
1
In Shutter Priority mode, the camera automatically adjusts the aperture
value according to the shutter speed you choose. This mode is useful for
capturing photos of fast-moving subjects or for creating tracer eects in a
photo.
For example, set the shutter speed to over 1/500 s to freeze the subject. To
make the subject appear blurred set the shutter speed to below 1/30 s.
Slow shutter speedFast shutter speed
Press [I] to select the shutter speed.
2
Rotate the navigation button to adjust the shutter speed.
3
Set the desired options.
4
Half-press [Shutter] to focus, and then press [Shutter] to
5
capture the photo.
In order to compensate for the reduced amount of light allowed by fast shutter
speeds, open the aperture and let in more light. If your photos are still too dark,
increase the ISO value.
57
Page 59
My Camera > Shooting modes
M Manual mode
Manual mode lets you adjust the shutter speed and aperture value
manually. In this mode, you can fully control the exposure of your photos.
This mode is useful in controlled shooting environments, such as a studio,
or when it is necessary to ne-tune camera settings. The Manual mode is
also recommended for shooting night scenes or reworks.
Rotate the mode dial to M.
1
Press [I] to select the aperture value or shutter speed.
2
Rotate the navigation button to adjust the aperture value or
3
shutter speed.
Set the desired options.
4
Half-press [Shutter] to focus, and then press [Shutter] to
5
capture the photo.
Using Framing Mode
When you adjust the aperture value or shutter speed, the exposure
changes according to the settings, so the display may darken. With this
function on, the brightness of the display is constant regardless of the
settings, so you can better frame your shot.
To use Framing
Mode,
In Shooting mode, press [m] ĺ b ĺ Framing Mode ĺ
an option.
58
Page 60
My Camera > Shooting modes
Using the Bulb function
Use the Bulb function to shoot night scenes or the night sky. During the
interval between the rst [Shutter] press and the second [Shutter] press,
the shutter is left open so you can create moving light eects.
In Shooting mode, press [I] to select the shutter speed ĺ
To use a bulb,
•
•
•
•
•
•
If you set a high ISO value or open the shutter for a long time, image noise
may increase.
Drive options and ash options cannot be used with the Bulb function.
The Bulb function is available only in Manual mode.
Use a tripod to prevent your camera from shaking.
The longer you open the shutter, the longer it takes to save a photo. Do not
turn the camera o while the camera saves a photo.
If you use this function for a long time, use a fully charged battery.
Completely rotate the navigation button counter-clockwise
to set the shutter speed to Bulb
shooting
ĺ
Press [Shutter] again to stop shooting.
ĺ
Press [Shutter] to start
59
Page 61
My Camera > Shooting modes
s Smart mode
In Smart mode, you can capture photos with options that are preset for a
specic scene.
Rotate the mode dial to s.
1
Select a scene.
2
OptionDescription
Beauty Face
Best Face
Capture a portrait with options to hide facial
imperfections.
Capture multiple photos and replace faces to
create the best possible image.
OptionDescription
Food
Parties and
Indoors
Action Freeze
Rich Tones
Waterfall
Silhouette
Sunset
Night
Fireworks
Light Trace
Half-press [Shutter] to focus, and then press [Shutter] to
3
Capture a photo of food in more colorful tones.
Capture a crisp indoor photos.
Capture subjects moving at high speed.
Capture a photo with vibrant colors.
Capture scenes with waterfalls.
Capture subjects as dark shapes against a light
background.
Capture scenes at sunset, with natural-looking
reds and yellows.
Capture a photo with less blurring and image
noise in low light conditions.
Capture scenes with reworks.
Capture scenes with the light trailing in low-light
conditions.
capture.
Continuous Shot
Kids Shot
Landscape
Macro
Capture a series of photos of moving subjects.
Capture a photo with a funny sound to get a kid's
attention.
Capture still-life scenes and landscapes.
Capture small or close-up subjects.
60
Page 62
My Camera > Shooting modes
Using the Best Face mode
In Best Face mode, you can capture multiple photos and replace faces to
create the best possible image. Use this mode to select the best image for
each individual when capturing group photos.
Rotate the mode dial to s, and then select Best Face.
1
Align your subject in the frame, and then half-press [Shutter]
2
to focus.
Press [Shutter] to capture the photo.
3
•
The camera captures 5 photos consecutively.
•
The rst photo is set as the background image.
•
The camera automatically detects faces after shooting.
Select a face to replace by using the navigation button.
4
Select the best image from the 5 faces that were captured.
5
•
Repeat steps 4 and 5 to replace the rest of the faces in the photo.
•
The icon will appear on the image that the camera recommends.
BackSet
Press [f] to save the photo.
6
•
Use a tripod to prevent your camera from shaking.
•
The resolution is set to 5.9M or less.
CancelSave
61
Page 63
My Camera > Shooting modes
R Panorama mode
In Panorama mode, you can capture a wide panoramic scene in a single
photo. Panorama mode captures and combines a series of photos to create
a panoramic image.
Rotate the mode dial to R.
1
Press and hold [Shutter], and then slowly move the camera in
2
the direction you selected.
•
An arrow toward the direction of motion is displayed, and the entire
shooting image is displayed in the preview box.
•
When the scenes are aligned, the camera captures the next photo
automatically.
When you are nished, release [Shutter].
3
•
The camera will automatically save the shots into one photo.
•
If you release [Shutter] while shooting, the panoramic shooting
stops and photos that have been captured are saved.
•
The resolution varies depending on the panoramic photo you captured.
•
In Panorama mode, some shooting options are not available.
•
The camera may stop shooting due to the shooting composition or the
subject's movement.
•
In Panorama mode, your camera may not capture the entire last scene if you
stop moving the camera to improve the photo quality. To capture the entire
scene, move your camera slightly beyond the point where you want the
scene to end.
•
For best results when capturing panoramic photos, avoid the following:
-
moving the camera too quickly or too slowly
-
moving the camera too little to capture the next image
-
moving the camera at irregular speeds
-
shaking the camera
-
shooting in dark places
-
capturing moving subjects nearby
-
shooting conditions where the brightness or color of light is changing
•
Photos taken are automatically saved, and shooting is stopped under the
following conditions:
-
if you change the shooting direction while shooting
-
if you move the camera too rapidly
-
if you do not move the camera
62
Page 64
My Camera > Shooting modes
Recording a video
In Shooting mode, you can record Full HD videos (1920X1080) by pressing
(Video recording). The camera lets you record a video up to 20 minutes
in length at 30 fps, and saves the les in MP4 (H.264) format. The sound is
recorded via the camera's microphone.
When you use a lens that does not have an AF/MF switch while recording
a video, press [F] to deactivate or activate the AF function. When you use
the lens that has an AF/MF switch, the AF function works according to the
switch’s setting.
Select Fader to fade in or out a scene. You can also select Voice or other
options to set recording options. (p. 99)
Rotate the mode dial to t, P, A, S, M, or s.
1
•
This feature may not work in some modes.
Set the desired options.
2
Press (Video recording) to start recording.
3
•
The camera will retain the shutter speed and aperture value that
you have set before starting shooting.
Press (Video recording) again to stop.
4
•
You can also press [Shutter] to stop recording.
63
Page 65
My Camera > Shooting modes
•
H.264 (MPEG-4 part10/AVC) is the latest video coding format established
in 2003 collaboratively by ISO-IEC and ITU-T. Since this format uses a high
compression rate, more data can be saved in less memory space.
•
If you have the image stabilizer option on when shooting a movie, the
camera may record the image stabilizer sound.
•
The zoom sound or other lens sounds may be recorded if you adjust the lens
while recording a video.
•
When using an optional video lens, the autofocus noise is not recorded.
•
If you remove the camera lens while recording a movie, the recording will be
interrupted. Do not change the lens while recording.
•
If you change the shooting angle of the camera suddenly while shooting a
movie, the camera may not be able to record images accurately. Use a tripod
to minimize camera shake.
•
The camera supports only the Multi AF function when recording a video. You
cannot use any other focus area setting functions.
•
When the size of a movie le exceeds 4 GB, the camera automatically stops
recording even if the maximum recording time (20 minutes) has not been
reached.
•
If you use a slow writing memory card, the recording of your movie can
be interrupted because the card cannot process data at the rate the video
is being shot. If this occurs, replace the card with a faster memory card or
reduce the video size (for example, from 1280X720 to 640X480).
•
When formatting a memory card, always format using the camera. If you
format on another camera or a PC, you can lose les on the card or cause a
change in the capacity of the card.
•
While recording a video in the same ISO sensitivity, the screen may be darker
than taking a photo. Adjust the ISO sensitivity.
•
When you record a video in Program, Aperture Priority, or Shutter Priority
mode, ISO is automatically set to Auto.
64
Page 66
My Camera > Shooting modes
Available functions by shooting mode
For details about shooting functions, see Chapter 2.
Learn about the functions you can set in Shooting mode.
You can enjoy more customized photos and videos by using the shooting functions.
Page 68
S
olutio
Shooting Functions
Size and Resolution
Shooting Functions > Size and Resolution
Shooting Functions >
ize and Res
n
Photo size
As you increase the resolution, your photo or video will include more
pixels, so it can be printed on larger paper or displayed on a larger screen.
When you use a high resolution, the le size will also increase. Select a low
resolution for photos that will be displayed in a digital picture frame or
uploaded to the web.
To set the size,
In Shooting mode, press [m] ĺ b ĺ Photo Size ĺ
an option.
IconSizeRecommended for
(3:2) 5472x3648*Printing on A1 paper.
(3:2) 3888x2592Printing on A2 paper.
(3:2) 2976x1984Printing on A3 paper.
(3:2) 1728x1152Printing on A5 paper.
(16:9) 5472x3080
(16:9) 3712x2088
(16:9) 2944x1656
(16:9) 1920x1080
(1:1) 3648x3648Printing a square photo on A1 paper.
(1:1) 2640x2640Printing a square photo on A3 paper.
(1:1) 2000x2000Printing a square photo on A4 paper.
(1:1) 1024x1024Attaching to an email.
Printing on A1 paper or viewing on an
HDTV.
Printing on A3 paper or viewing on an
HDTV.
Printing on A4 paper or viewing on an
HDTV.
Printing on A5 paper or viewing on an
HDTV.
* Default
Available options may dier depending on shooting conditions.
67
67
Page 69
Shooting Functions > Size and Resolution
Quality
The camera saves photos in either the JPEG or RAW format.
Photos captured by a camera are often transformed to the JPEG format
and stored in the memory according to the settings of the camera at the
time of shooting. RAW les are not transformed to the JPEG format and are
stored in the memory without any changes.
RAW les have the le extension "SRW". To adjust and calibrate exposures,
White Balances, tones, contrasts, and colors of the RAW les, or to convert
them into JPEG or TIFF format, use the Adobe Photoshop Lightroom
program found on the supplied DVD-ROM.
Ensure you have enough space on the memory card to save photos in the
RAW format.
To set the quality,
IconFormatDescription
JPEG
JPEG
In Shooting mode, press [m] ĺ b ĺ Quality ĺ
an option.
Super Fine*:
• Compressed for the best quality.
• Recommended for printing in large size.
Fine:
• Compressed for better quality.
• Recommended for printing in normal size.
* Default
IconFormatDescription
Normal:
JPEG
RAW
RAW+JPEG
RAW+JPEG
RAW+JPEG
Available options may dier depending on shooting conditions.
• Compressed for normal quality.
• Recommended for printing in small size or
uploading to the web.
RAW:
• Save a photo without data loss.
• Recommended for editing after shooting.
RAW + S.Fine: Save a photo in both the JPEG
(S.Fine quality) and RAW format.
RAW + Fine: Save a photo in both the JPEG (Fine
quality) and RAW format.
RAW + Normal: Save a photo in both the JPEG
(Normal quality) and RAW format.
* Default
68
Page 70
y
Shooting Functions
ISO sensitivity
Shooting Functions > ISO sensitivity
Shooting Functions >
SO sensitivit
The ISO sensitivity value represents the sensitivity of camera to light.
The larger the ISO value, the more sensitive the camera is to light.
Consequently, by selecting a higher ISO sensitivity value, you can capture
photos in dim or dark places at faster shutter speeds. However, this may
increase electronic noise and result in a grainy photo.
To set ISO sensitivity,
In Shooting mode, press [m] ĺ b ĺ ISO ĺ an
option.
Examples
•
•
•
ISO 100ISO 400
ISO 800ISO 3200
Increase the ISO value in places where ash use is prohibited. You can capture
a clear photo by setting a high ISO value without having to secure more light.
Use the Noise Reduction function in order to reduce the visual noise that can
appear on photos of a high ISO value. (p. 134)
Available options may dier depending on the shooting conditions.
69
69
Page 71
Wh
ala
e
Shooting Functions
White Balance
Shooting Functions > White Balance
Shooting Functions >
ite B
nc
White Balance represents the light source that inuences on the color of a
photo.
The color of a photo depends on the type and quality of the light source.
If you want the color of your photo to be realistic, select an appropriate
lighting condition to calibrate the White Balance, such as Auto WB,
Daylight, Cloudy, Tungsten, or adjust color temperature manually.
You can also adjust color for the preset light sources so that the colors of
the photo match the actual scene under mixed lighting conditions.
To set the White
Balance,
IconDescription
Auto WB*: Use automatic settings depending on the lighting
conditions.
Daylight: Select when taking outdoor photos on a sunny day. This
option results in photos closest to the natural colors of the scene.
Cloudy: Select when taking outdoor photos on a cloudy day or in
shadows. Photos captured on cloudy days tend to be more bluish
than on sunny days. This option osets that eect.
Fluorescent White: Select when shooting under a daylight
uorescent lamp, especially for white uorescent light.
In Shooting mode, press [m] ĺ b ĺ White Balance ĺ
an option.
* Default
IconDescription
Fluorescent NW: Select when shooting under a daylight
N
uorescent lamp, especially for white uorescent light of very
white hues.
Fluorescent Daylight: Select when shooting under a daylight
D
uorescent lamp, especially for white uorescent light of slightly
bluish hue.
Tungsten: Select when taking indoor photos under incandescent
bulbs or halogen lamps. Incandescent tungsten bulbs tend to have
a reddish hue. This option osets that eect.
Flash WB: Select when using a ash.
Custom Set: Use your pre-dened settings. You can manually set
the White Balance by pressing [D], and then shooting a white
sheet of paper. Fill the spot metering circle with the paper and set
the White Balance.
Color Temperature: Manually adjust the color temperature of
the light source. Color temperature is a measurement in degrees
Kelvin that indicates the specic type of light source. You can get a
warmer photo with a higher value, and a cooler photo with a lower
value. Press [D], and then adjust the color temperature.
Available options may dier depending on shooting conditions.
* Default
70
70
Page 72
Shooting Functions > White Balance
Customizing preset White Balance options
You can also customize preset White Balance options.
To customize
preset options,
White Balance : Daylight
BackReset
In Shooting mode, press [m] ĺ b ĺ White Balance ĺ
an option
Picture Wizard lets you apply dierent photo styles to your photo to create
various looks and emotional moods. You can also create and save your
own photo styles by adjusting color, saturation, sharpness, and contrast for
each style.
There is no rule for which style is suitable in which conditions. Experiment
with dierent styles and nd your own settings.
icture Wizard (photo styles)
CoolCalmClassic
To set a photo style,
Examples
Standard VividPortrait
LandscapeForestRetro
In Shooting mode, press [m] ĺ b ĺ Picture Wizard ĺ
an option.
•
You can also adjust the value of the preset style settings. Select a Picture
Wizard option, press [D], and then adjust color, saturation, sharpness, or
contrast.
•
To customize your own picture wizard, select , , or , and then adjust
the color, saturation, sharpness, and contrast.
•
Picture Wizard options cannot be set with Smart Filter options at the same
time.
72
72
Page 74
od
e
Shooting Functions
AF mode
Shooting Functions > AF mode
Shooting Functions > AF m
Learn how to adjust the camera’s focus according to the subjects.
You can select a focusing mode appropriate to the subject among Single
Auto Focus, Continuous Auto Focus, and Manual Focus. The AF function is
activated when you press [Shutter] halfway. In the MF mode, you have to
rotate the focus ring on the lens to focus manually.
In most cases, you can have a focus by selecting Single AF. Fast moving
subjects or subjects with small shading dierences to the background are
dicult to focus. Select an appropriate focusing mode for such instances.
If your lens has an AF/MF switch, you must set the switch according to
the selected mode. Set the switch to AF when you select Single AF or
Continuous AF. Set the switch to MF when you select Manual Focus.
When your lens has no AF/MF switch, press [F] to select a desired AF
mode.
To set the auto
focus mode,
•
You can also set the option by pressing [m] ĺ b ĺ AF Mode ĺ
an option in Shooting mode.
•
The available options may dier depending on the lens in use.
In Shooting mode, press [F] ĺ an option.
73
73
Page 75
Shooting Functions > AF mode
Single AF
Single AF is appropriate for shooting a still subject. When you press
[Shutter] halfway, the focus xes in the focus area. The area turns green
when the focus is achieved.
Continuous AF
While you are pressing [Shutter] halfway, the camera continues to
automatic focusing. This mode is recommended for shooting a person on a
bicycle, a running dog, or a car racing scene.
74
Page 76
Shooting Functions > AF mode
Manual focus
You can manually focus on a subject by rotating the focus ring on the
lens. The MF Assist function lets you easily achieve a focus. While you
are rotating the focus ring, the focus area is magnied. This mode is
recommended for shooting an object similar in color to the background, a
night scene, or reworks.
•
If you use this function, you cannot set Face Detection, AF Area, and Link AE
to AF Point options.
•
While you are adjusting the focus, the manual focus scale
(
) appears.
75
Page 77
area
Shooting Functions
AF area
Shooting Functions > AF area
Shooting Functions > AF
The AF area function changes the positions of the focus area.
Generally, cameras focus on the nearest subject. When there are a lot of
subjects, however, unwanted subjects can be in focus. In order to prevent
unwanted subjects from being in focus, change the focus area so that
a desired subject is in focus. You can get a clearer and sharper photo by
selecting an appropriate focus area.
To set the auto
focus area,
•
Available options may dier depending on shooting conditions.
•
When the AF/MF switch is set to MF, you cannot change the AF area from the
shooting menu.
In Shooting mode, press [m] ĺ b ĺ AF Area ĺ
an option.
Selection AF
You can set the focus on an area you want. Apply an out-of-focus eect to
make the subject more distinguishable.
The focus on the photo below was repositioned and resized so that it ts
the subject’s face.
AF SizeMove
To resize or move the focus area, in Shooting mode, press [o]. Press
[D/I/C/F] to move the focus area. Rotate the navigation button to
resize the focus area.
76
76
Page 78
Shooting Functions > AF area
Multi AF
The camera displays a green rectangle in places where focus is set
correctly. The photo is divided into two or more areas, and the camera
obtains focus points of each area. It is recommended for scenery photos.
When you press [Shutter] halfway, the camera displays the focus areas as
shown in the photo below.
Tracking AF
Compose your shot and press [o] to focus on the subject. Tracking AF
allows you to track and automatically focus on your subject, even when
the subject is moving or when you change the shooting composition.
White frame: Your camera is
tracking the subject.
Green frame: Your subject is
in focus when you half-press
[Shutter].
Red frame: Your camera failed to
focus.
77
Page 79
Shooting Functions > AF area
•
If you do not select a focus area, the focus frame will appear in the center of
the screen.
•
Tracking a subject may fail when:
-
the subject is too small
-
the subject moves irregularly
-
the subject is backlit or you are shooting in a dark place
-
colors or patterns on the subject and the background are the same
-
the subject includes horizontal patterns, such as blinds
-
the camera shakes excessively
-
you capture photos continuously
•
When tracking fails, the feature will be reset.
•
If the camera fails to track the subject, the focus area will be reset.
•
If the camera fails to focus, the focus frame will change to red and the focus
will be reset.
78
Page 80
Shooting Functions
Face Detection
Shooting Functions > Face Detection
Shooting Functions >
ce Detection
Use Face Detection options to capture a self portrait or a smiling face.
To use the face
detection function,
•
When your camera detects a face, it tracks the detected face automatically.
•
Depending on the Picture Wizard options, Face Detection may not be
eective.
•
When you set manual focus, Face Detection may not be available.
•
Face Detection may not be eective when:
-
the subject is far from the camera
-
it is too bright or too dark
-
the subject is not facing the camera
-
the subject is wearing sunglasses or a mask
-
the subject’s facial expression changes drastically
-
the subject is backlit or the lighting conditions are unstable
•
When you set Face Detection options, the AF area is automatically set to Multi
AF.
•
Depending on the Face Detection options you selected, some shooting
options may not be available.
In Shooting mode, press [m] ĺ b ĺ Face Detection ĺ
an option.
Normal
The camera focuses on human faces preferentially. Faces of up to
10 people can be detected. This setting is recommended for shooting a
group of people.
When you press [Shutter] halfway, the camera focuses on faces as shown
in the photo below. In cases of shooting a group of people, the camera
displays the focus on the nearest person’s face in white and the rest of the
people’s faces in gray.
79
79
Page 81
Shooting Functions > Face Detection
Smile Shot
The camera automatically releases the shutter when it detects a smiling
face.
When your subject smiles broadly, your camera can detect the smile more easily.
Wink Shot
The camera automatically releases the shutter 2 seconds after it detects a
winking face.
•
Wink for more than 1 second for better detection.
•
Wink detection may fail when:
-
the camera is below eye level
-
the subject appears dark due to backlighting
-
the subject is wearing glasses
-
the subject is far from the camera
80
Page 82
ssist
Shooting Functions
MF Assist
Shooting Functions > MF Assist
Shooting Functions >
F A
In the manual focus mode, you have to rotate the focus ring on the lens to
focus. When you use the MF Assist function, you can enlarge the scene and
easily adjust the focus while rotating the focus ring. This function is only
available on a lens that supports manual focus.
To set the manual
focus assist,
In Shooting mode, press [m] ĺ b ĺ MF Assist ĺ
an option.
* Default
IconDescription
O: Do not use the MF Assist function.
Enlarge x5*: The focus area is magnied by 5 times when you
adjust the focus.
Enlarge x8: The focus area is magnied by 8 times when you
adjust the focus.
Use the Optical Image Stabilization (OIS) function to minimize camera
shake. OIS may not be available with some lenses.
Camera shake tends to occur in dark places or when shooting indoors.
In such cases, the camera uses slower shutter speeds in order to increase
the amount of light taken in, which can result in a blurry photo. You can
prevent this situation by using the OIS function.
If your lens has an OIS switch, you have set the switch to ON to use the OIS
function.
Without OIS correctionWith OIS correction
To set OIS options,
IconDescription
Mode 1*: The OIS function is applied only when you press
[Shutter] in full or half.
Mode 2: The OIS function is on.
O: The OIS function is o.
In Shooting mode, press [m] ĺ b ĺ OIS (Anti-Shake) ĺ
an option.
* Default
•
OIS may not function properly when:
-
you move your camera to follow a moving subject
-
there is too much camera shake
-
the shutter speed is slow (for example, when you select Night in s mode)
-
the battery is low
-
you capture a close-up shot
•
If you use the OIS function with a tripod, your images may be blurred by
the vibration of the OIS sensor. Deactivate the OIS function when you use a
tripod.
•
If the camera is hit or dropped, the display will be blurry. If this occurs, turn o
the camera, and then turn it on again.
•
Use the OIS function only when needed because the function consumes
more battery power.
•
To set an OIS option on the menu, set the OIS switch on your lens to ON.
•
This option may not be available with some lenses.
•
O may not be available with some lenses.
82
82
Page 84
d
)
Shooting Functions
Drive (shooting method)
Shooting Functions > Drive (shooting method)
Shooting Functions >
rive (shooting metho
You can set the shooting method, such as Continuous, Burst, Timer, or
Bracketing.
Select Single to capture one photo at a time. Select Continuous or Burst
to shoot fast moving subjects. Select AE Bracket, WB Bracket, P Wiz Bracket, or Depth Bracket to adjust exposure, White Balance, apply
picture Wizard eects, or capture photos with dierent depths of eld. You
can also select Timer to capture a photo automatically after a specied
time.
To change the
shooting method,
•
You can also set the option by pressing [m] ĺ b ĺ Drive ĺ
a shooting method in Shooting mode.
•
Available options may dier depending on shooting conditions.
In Shooting mode, press [C] ĺ an option.
Single
Capture one photo whenever you press [Shutter]. Recommended for
general conditions.
83
83
Page 85
Shooting Functions > Drive (shooting method)
Continuous
Continuously capture photos while you are pressing [Shutter]. You can
capture up to 5 photos per second.
If you select Continuous, the noise reduction function is not available.
Burst
Consecutively capture up to 10 shots per second (3 seconds), 15 shots per
second (2 seconds), or 30 shots per second (1 second) when you press
[Shutter] once. It is recommended for shooting the rapid motion of fast
moving subjects such as racing cars.
•
To set the number of shots, in Shooting mode, press [C] ĺ Burst, and then
press [D].
•
The photo size is set to 5M.
•
It may take longer to save a photo.
•
You cannot use the ash with this option.
•
Shutter speed must be faster than 1/30 second.
•
Photos captured with this option may be slightly enlarged when saving.
•
You cannot set an ISO option higher than ISO 3200.
•
This option cannot be used with the RAW le format and is not available
when the photo quality is set to RAW.
84
Page 86
Shooting Functions > Drive (shooting method)
Timer
Capture a photo after a specied time. You can set the Timer for 2 to 30
seconds.
•
Press [Shutter] to stop capturing.
•
To set the timer details, in Shooting mode, press [C] ĺ Timer, and then
press [D].
Auto Exposure Bracketing (AE Bracket)
When you press [Shutter], the camera captures 3 consecutive photos: the
original, one a step darker, and one a step lighter. Use a tripod to prevent
blurry photos as the camera captures three photos continuously. You can
adjust the settings in Bracket Settings menu.
Exposure -2
Original
To set the bracketing details, press [m] ĺ d ĺ Bracket Settings ĺ an
option.
Exposure +2
85
Page 87
Shooting Functions > Drive (shooting method)
White Balance Bracketing (WB Bracket)
When you press [Shutter], the camera captures 3 consecutive photos:
the original and two more with dierent White Balance settings. The
original photo is captured when you press [Shutter]. The other two are
automatically adjusted according to the White Balance you have set. You
can adjust the settings in Bracket Settings menu.
WB-2
Original
•
To set the bracketing details, press [m] ĺ d ĺ Bracket Settings ĺ an
option.
•
This option cannot be used with the RAW le format and is not available
when the photo quality is set to RAW.
WB+2
Picture Wizard Bracketing (P Wiz Bracket)
When you press [Shutter], the camera captures 3 consecutive photos,
each with a dierent Picture Wizard setting. The camera captures a photo
and applies the three Picture Wizard options you have set to the image
captured. You can select three dierent settings in Bracket Settings menu.
Vivid
Standard
•
To set the bracketing details, press [m] ĺ d ĺ Bracket Settings ĺ an
option.
•
This option cannot be used with the RAW le format and is not available
when the photo quality is set to RAW.
Retro
86
Page 88
Shooting Functions > Drive (shooting method)
Depth Bracketing
When you press [Shutter], the camera captures 3 consecutive photos,
each with a dierent depth of eld by adjusting the aperture value. Use
a tripod to prevent blurry photos as the camera captures three photos
continuously. You can adjust the settings in Bracket Settings menu.
•
To set the bracketing details, press [m] ĺ d ĺ Bracket Settings ĺ an
option.
•
This feature is available only in Program or Aperture Priority mode.
•
If the aperture value is set to its maximum or minimum, two photos will be
captured with the maximum or minimum aperture value.
87
Page 89
h
Shooting Functions
Flash
Shooting Functions > Flash
Shooting Functions >
s
In order to capture a realistic photo of a subject, the amount of light
should be constant. When the light source varies, you can use a ash and
supply a constant amount of light. Select appropriate settings according to
a light source and a subject.
To set ash options,
IconDescription
O: Do not use the ash.
Smart Flash: The camera automatically adjusts the brightness
of the ash according to the amount of light in the surrounding
A
environment.
Auto: The ash automatically res in dark places.
A
Auto Red-eye: The ash automatically res and reduces red-eyes.
Fill in: The ash res whenever you capture a photo. (Brightness is
automatically adjusted.)
Fill-in Red: The ash res whenever you capture a photo and
reduces red-eyes.
1st Curtain: The ash res
immediately after the shutter opens.
The camera captures a photo of a
subject earlier in an action sequence
clearly.
In Shooting mode, press [m] ĺ b ĺ Flash ĺ
an option.
Ball moving direction
IconDescription
2nd Curtain: The ash res just
before the shutter closes. The
camera captures a photo of a
subject later in an action sequence
clearly.
•
The available options may dier depending on shooting conditions.
•
There is an interval between two bursts of the ash. Do not move until the
ash res a second time.
•
If you select O, the ash does not re even when an external ash is
attached.
Use only Samsung-approved ashes. Using incompatible external ashes may
damage your camera.
Ball moving direction
88
88
Page 90
Shooting Functions > Flash
Reducing the red-eye eect
If the ash res when you capture a photo of a person in the dark, a red
glow may appear in the eyes. To reduce the red-eye eect, select Auto Red-eye or Fill-in Red.
Without red-eye reductionWith red-eye reduction
If the subject is too far from the camera or moves when the rst ash res, redeyes may not be reduced.
Adjusting the ash intensity
When the ash is on, adjust the ash intensity ±2 levels.
To set the ash
intensity,
BackReset
•
Adjusting the flash intensity may not be eective when:
-
the subject is too close to the camera
-
you set a high ISO sensitivity
-
the exposure value is too big or too small
-
it is too bright or too dark
•
In some shooting modes, you cannot use this function.
•
If you attach an intensity-adjustable external ash to the camera, the intensity
settings of the ash will be applied.
•
If the subject is too close when you use the ash, some light may be blocked,
resulting in a dark photo. Ensure that the subject is within the recommended
range, which varies by lens.
•
When a lens hood is attached, the light from the ash can be blocked by the
hood. Remove the hood to use the ash.
In Shooting mode, select [m] ĺ b ĺ Flash ĺ an option
ĺ
[D] ĺ Rotate the navigation button or press [C/F] to
adjust the ash intensity.
Flash : Fill in
89
Page 91
g
Shooting Functions
Metering
Shooting Functions > Metering
Shooting Functions >
eterin
The metering mode refers to the way in which a camera measures the
quantity of light.
The camera measures the amount of light in a scene, and in many of its
modes, uses the measurement to adjust various settings. For example,
if a subject looks darker than its actual color, the camera captures an
overexposed photo of it. If a subject looks lighter than its actual color, the
camera captures an underexposed photo of it.
The brightness and overall mood of the photo can also be aected by how
the camera measures the amount of light. Select an appropriate setting for
a shooting condition.
To set a metering
option,
In Shooting mode, press [m] ĺ b ĺ Metering ĺ an
option.
Multi
The Multi mode calculates the amount of light in multiple areas. When
light is sucient or insucient, the camera adjusts the exposure by
averaging the overall brightness of the scene. This mode is suitable for
general photos.
90
90
Page 92
Shooting Functions > Metering
Center-weighted
The Center-weighted mode calculates a broader area than the Spot mode
does. It sums up the amount of light in the center portion of the shot
(60–80 %) and that of the rest of the shot (20–40 %). It is recommended
for situations where there is a slight dierence in brightness between a
subject and a background or an area of the subject is large compared to
the overall composition of the photo.
Spot
The Spot mode calculates the amount of light in the center. When you
capture a photo in conditions where there is a strong backlight behind a
subject, the camera adjusts the exposure so as to shoot a subject correctly.
For example, when you select the Multi mode in a strong backlight
condition, the camera calculates that the overall amount of light is
abundant, which results in a darker photo. The Spot mode can prevent this
situation as it calculates the amount of light in a designated area.
The subject is in bright color while the background is dark. The Spot mode
is recommended for a situation like this where a huge dierence in the
exposure exists between a subject and a background.
91
Page 93
Shooting Functions > Metering
Measuring the exposure value of the focus area
When this function is turned on, the camera automatically sets an optimal
exposure by calculating the brightness of the focus area. This function
is only available when you select Spot metering or Multi metering, and
Selection AF.
To set this
function,
In Shooting mode, press [m] ĺ b ĺ Link AE to AF Point
ĺ
an option.
92
Page 94
Shooting Functions
Dynamic Range
Shooting Functions > Dynamic Range
Shooting Functions >
namic Range
This function automatically corrects the loss of bright detail that can occur
due to shading dierences in the photo.
To set Dynamic Range
options,
Without Dynamic Range eectWith Dynamic Range eect
In Shooting mode, press [m] ĺ b ĺ
Dynamic Range
ĺ
an option.
IconDescription
O*: Do not use Dynamic Range.
Smart Range+: Correct the loss of bright detail.
HDR: Capture 3 photos with dierent exposures, and then
combine them to create a single image automatically.
Dynamic Range options cannot be set with the Bulb function.
* Default
•
You cannot set an ISO option higher than ISO 3200.
•
This option cannot be set with drive options other than Single
or Timer.
93
93
Page 95
r
Shooting Functions
Smart Filter
Shooting Functions > Smart Filter
Shooting Functions >
Smart Filter lets you apply special eects to your photos or videos. You can
select various lter options to create special eects that are dicult to be
achieved with normal lenses.
mart Filte
To set Smart Filter
options,
OptionDescription
O*
Vignetting
Miniature
Sketch
Fish Eye
Smart Filter options cannot be set with Picture Wizard options at the same time.
In Shooting mode, press [m] ĺ b ĺ Smart Filter ĺ
an option.
No eect
Apply the retro-looking colors, high contrast, and strong
vignette eect of Lomo cameras.
Apply a tilt-shift eect to make the subject appear in
miniature.
Apply a pen sketch eect.
Distort close objects to imitate the visual eect of a
sheye lens.
* Default
94
94
Page 96
n
Shooting Functions
Exposure compensation
Shooting Functions > Exposure compensation
Shooting Functions >
The camera automatically sets the exposure by measuring the levels of
light from the photo’s composition and the position of a subject. If the
exposure set by the camera is higher or lower than you expected, you can
adjust the exposure value manually. The exposure value is adjustable in ±3
increments. The camera displays the exposure warning in red for each step
beyond ±3 range.
xposure compensatio
To adjust the exposure value, press [f], and then select EV. You can also
press [I] to select the exposure value and rotate the navigation button
to adjust it.
You can check the exposure value by the position of the exposure level
indicator.
Exposure warning
Decreased exposure
Standard exposure index
Increased exposure
(darker)
(brighter)
Exposure level
indicator
-2
Original
+2
95
95
Page 97
k
Shooting Functions
Exposure lock
Shooting Functions > Exposure lock
Shooting Functions >
When you cannot achieve an appropriate exposure because of a strong
brightness contrast, lock the exposure and then capture a photo.
To lock the exposure, adjust the photo’s composition on which you want
to calculate the exposure, and then press the Custom button. (when the
function of the Custom button is set to AEL) (p. 139)
xposure loc
After locking the exposure, aim the lens where you desire, and then press
[Shutter].
96
96
Page 98
Video fu
s
Shooting Functions
Video functions
Shooting Functions > Video functions
Shooting Functions >
nction
The functions available for video are explained below.
Movie size
Set the movie size.
To set movie size
options,
When Video Out is set to NTSC
IconSizeRecommended for
*
1920X1080 (30 fps) (16:9)View on a Full HDTV.
1280X720 (30 fps) (16:9)View on an HDTV.
640X480 (30 fps) (4:3)View on a TV.
320X240 (30 fps) (4:3)
In Shooting mode, press [m] ĺ g ĺ Movie Size ĺ
an option.
Post on a website using the wireless
network (30 seconds maximum).
* Default
When Video Out is set to PAL
IconSizeRecommended for
*
1920X1080 (25 fps) (16:9)View on a Full HDTV.
1280X720 (25 fps) (16:9)View on an HDTV.
640X480 (25 fps) (4:3)View on a TV.
320X240 (25 fps) (4:3)
Post on a website using the wireless
network (30 seconds maximum).
* Default
97
97
Page 99
Shooting Functions > Video functions
Movie quality
Set the Movie quality.
To set movie
quality options,
IconExtensionDescription
MP4 (H.264)Normal: Record videos in normal quality.
MP4 (H.264)HQ*: Record videos in high quality.
In Shooting mode, press [m] ĺ g ĺ Movie Quality ĺ
an option.
* Default
Multi Motion
Set the playing speed of a video.
To set playing
speed options,
IconDescription
x0.25: Record a video to view it at 1/4 normal speed during
playback. (Available only with 640x480 or 320x240)
x1*: Record a video to view it at normal speed during playback.
x5: Record a video to view it at 5X normal speed during playback.
x10: Record a video to view it at 10X normal speed during
playback.
x20: Record a video to view it at 20X normal speed during
playback.
•
If you select an option other than x1, the sound recording function will not
be supported.
•
The available options may dier depending on shooting conditions.
In Shooting mode, press [m] ĺ g ĺ Multi Motion ĺ
an option.
* Default
98
Page 100
Shooting Functions > Video functions
Fader
You can fade in or fade out a scene using the fader function on the camera
without having to do it on a PC. Set the fade in option to gradually fade in
at the start of the scene. Set the fade out option to gradually fade out the
scene. Use the function appropriately and add dramatic eects on your
videos.
To set fader
options,
IconDescription
O*: Fader function not used.
In: Scene gradually fades in.
Out: Scene gradually fades out.
In-Out: The fader function is applied at the start and end of the
scene.
When you use the fader function, it may take longer to save a le.
In Shooting mode, press [m] ĺ g ĺ Fader ĺ
an option.
* Default
Voice
Sometimes, a muted video is more appealing than the one with sound.
Turn the voice o to record a muted video.
To set voice
options,
In Shooting mode, press [m] ĺ g ĺ Voice ĺ
an option.
99
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.