How it Works
Samsung
Loading...
DVD-V340
User Manual [ko]
2 pgs86.91 Kb0
Instruction Manual
50 pgs2.29 Mb0
User Manual
47 pgs2.41 Mb0
User Guide [ar]
47 pgs5.35 Mb0
Table of contents
Loading...

Samsung DVD-V340, DVD-V440, DVD-V540 Instruction Manual

OPEN/CLOSE
STANDBY/ON
OK
Instruction Manual
DVD-V540 DVD-V440 DVD-V340
PAL
®

Remote Control Overview

OPEN/CLOSE
STANDBY/ON
OK
OPEN/CLOSE
STANDBY/ON
OK
(DVD-V440/DVD-V340)(DVD-V540)

Contents

ENG-2

Foreword

Safety Instructions . . . . . . . . . . . . . . . . . . . . .
3
Disc Type and Characteristics . . . . . . . . . . . .
4

DVD-VCR Overviews

Front View of the DVD-VCR . . . . . . . . . . . . .
5
Rear View of the DVD-VCR . . . . . . . . . . . . . .
6
Accessories . . . . . . . . . . . . . . . . . . . . . . . . .
6
Display Indicators . . . . . . . . . . . . . . . . . . . . .
7

Connecting Your DVD-VCR

Inserting Batteries in the Remote Control . . . .
7 Connecting DVD-VCR to the TV
using the Coaxial Cable . . . . . . . . . . . . . . . .
7 Connecting DVD-VCR to the TV
using the RCA Cable . . . . . . . . . . . . . . . . . . .
8 Connecting DVD-VCR to a Satellite
Receiver or Other Equipment . . . . . . . . . . . .
8
Plug & Auto Set up . . . . . . . . . . . . . . . . . . . .
8
Tuning Your Television for the DVD-VCR . . . .
9
Deck Control Keys . . . . . . . . . . . . . . . . . . . .
9
Setting the Date and Time . . . . . . . . . . . . . . .
10
Setting the Menu Language . . . . . . . . . . . . . .
10

Setting Up Your DVD-VCR

Presetting the Stations Automatically . . . . . . .
11
Presetting the Stations Manually . . . . . . . . . .
12
Clearing a Preset Station . . . . . . . . . . . . . . . .
13
Changing the Preset Station Table . . . . . . . . .
13 Selecting the RF OUT Sound Mode (B/G-D/K)
(Newzealand Model only) . . . . . . . . . . . . . . .
14
Setting the DVD-VCR Output Channel . . . . . .
14
Selecting the Colour Mode . . . . . . . . . . . . . .
15 NICAM (Newzealand Model only)
★
(DVD-V540/DVD-V440) . . . . . . . . . . . . . . .
15
Intelligent Picture Control . . . . . . . . . . . . . . .
16
G-CODE Extend ★(DVD-V540 Only) . . . . . . .
16
Auto Power off . . . . . . . . . . . . . . . . . . . . . . .
17
Screen Messages . . . . . . . . . . . . . . . . . . . . .
17
Selecting the Cassette Type . . . . . . . . . . . . .
18
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . .
18

Recording Television Broadcasts

Selecting the Recording Speed . . . . . . . . . . .
18
S-VHS Play . . . . . . . . . . . . . . . . . . . . . . . . . .
18
Recording a Programme Immediately . . . . . .
19
Protecting a Recorded Cassette . . . . . . . . . .
19 Recording a Programme with Automatic Stop
19 Using the G-CODE Feature
★
(DVD-V540 Only) . . . . . . . . . . . . . . . . . . . .
20 Modifying G-code Programming
★
(DVD-V540 Only) . . . . . . . . . . . . . . . . . . . .
21
Using the Timer Programming Feature . . . . .
22
Checking a Preset Recording . . . . . . . . . . . .
22
Cancelling a Preset Recording . . . . . . . . . . .
23

Playing Back

Playing a Cassette . . . . . . . . . . . . . . . . . . . .
23
Adjusting Picture Alignment Manually . . . . . .
23
Selecting the Audio Output Mode
★
(DVD-V540/DVD-V440) . . . . . . . . . . . . . . .
23
Playing a Cassette in Slow Motion . . . . . . . . .
24
Playing a Sequence Frame by Frame . . . . . .
24
Playing a Sequence at Variable Speeds . . . .
24
Searching for a Specific Sequence . . . . . . . .
25
Using the Tape Counter . . . . . . . . . . . . . . . . .
26
Connecting an RCAAudio/Video Input Cable .
27
Using the Assemble Edit Function . . . . . . . . .
27
Recording from Another VCR or Camcorder .
28
Using the TV Buttons on the Remote Control
★
(DVD-V540 Only) . . . . . . . . . . . . . . . . . . . .
28

DVD Functions

Choosing a Connection . . . . . . . . . . . . . . . . .
29
Setting Up the Language Features . . . . . . . .
29
Setting Up the Audio Options . . . . . . . . . . . . .
31
Setting Up the Display Options . . . . . . . . . . .
32
Setting Up the Parental Control . . . . . . . . . . .
33
A/V Receiver Connections . . . . . . . . . . . . . . .
34
Special Playback Features . . . . . . . . . . . . . .
34 Component Connections
(for DVD) ★(DVD-V540/DVD-V440) . . . . . . . .
35
Adjusting the Aspect Ratio (EZ View) . . . . . .
36
Using the Display Function . . . . . . . . . . . . . .
37
Changing the Camera Angle . . . . . . . . . . . . .
38
Selecting the Subtitle Language . . . . . . . . . .
38
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . .
39
Selecting the Audio Language . . . . . . . . . . . .
39
Using the Mark Function . . . . . . . . . . . . . . . .
40
MP3/WMA Play . . . . . . . . . . . . . . . . . . . . . . .
40
Program Play & Random Play . . . . . . . . . . . .
42
Picture CD Playback . . . . . . . . . . . . . . . . . . .
42 DivX/XviD/MPEG4 Special Playback
Features ★(DVD-V540 only) . . . . . . . . . . . . .
44 DivX/XviD/MPEG4 Playback
★
(DVD-V540 only) . . . . . . . . . . . . . . . . . . . .
45

Solving Problems

Technical Specifications . . . . . . . . . . . . . . . .
46
Problems and Solutions (VCR) . . . . . . . . . . .
47
Troubleshooting Guide (DVD) . . . . . . . . . . . .
48

Safety Instructions

ENG-3
The following illustrations represent precautions.
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
HH
5°C
40°C
10% 75%
Do NOT expose the DVD-VCR to extreme temperature conditions (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%).
Do NOT expose the DVD-VCR to direct sunlight.
Do NOT expose the DVD-VCR to any liquids.
Do NOT place any objects on the DVD-VCR or remote control.
During a storm and/or lightning, unplug the DVD-VCR from the mains socket and aerial.
If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must by authorized by Macrovision Corporized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
ENG-4

Disc Type and Characteristics

Disc Markings
Play Region Number
~
DIGITAL
SOUND
STEREO
NTSC
• Play Region Number
• NTSC broadcast system in U.S.A, Canada,
Korea, Japan, etc.
PAL
• PALcolour system in Australia, Newzealand, etc.
• Dolby Digital disc
• Stereo disc
• Digital Audio disc
• DTS disc
Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
Disc Types (Logos)
Recording Types
Disc Size Max. Playing Time Characteristics
12 Cm
8 Cm
Single-sided 240 min. Double-sided 480 min.
Single-sided 80 min. Double-sided 160 min.
Audio
+
Video
VIDEO-CD
AUDIO-CD
DVD
•
DVD contains excellent sound and video due to Dolby Digital and MPEG-2 system.
•
Various screen and audio functions can be easily selected through the on-screen menu.
12 Cm
8 Cm
74 min.
20 min.
74 min.
20 min.
Audio
+
Video
•
Video with CD sound, VHS quality & MPEG-1 compression technology.
12 Cm
8 Cm
Audio
•
An LP is recorded as an analog signal with more distortion. CD is recorded as a Digital Signal with better audio quality, less distortion and less deterioration of audio quality over time.
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
* It may not be to play CD-R,CD-RW and DVD-R in all cases due to the type of disc or condition of the recording.
This DVD player is capable of playing the following types of discs with the corresponding logos :
• Disc contains a Divx software product
ENG-5

Front View of the DVD-VCR

1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 16
1 DVD DECK 2 OPEN/CLOSE BUTTON 3 VIDEO CASSETE COMPARTMENT 4 EJECT BUTTON 5 STANDBY/ON BUTTON 6 REW/SKIP BACK BUTTON
7 STOP BUTTON 8 PLAY/STILLBUTTON 9 F.F / SKIP NEXT BUTTON 10 RECORD BUTTON 11 EZ VIEW BUTTON 12 PROGRAME SELECTION BUTTON
13 DVD / VCR SELECT BUTTON 14 PROGRESSIVE BUTTON 15 LINE IN2 VIDEO INPUT JACK 16 LINE IN2 AUDIO L, R INPUT JACK
12
3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 DVD DECK 2 VIDEO CASSETE COMPARTMENT 3 STANDBY/ON BUTTON 4 REW/SKIP BACK BUTTON 5 STOP BUTTON 6 PLAY/STILLBUTTON
7 F.F / SKIP NEXT BUTTON 8 RECORD BUTTON 9 EZ VIEW BUTTON 10 OPEN/CLOSE BUTTON 11 PROGRAME SELECTION BUTTON 12 DVD / VCR SELECT BUTTON
13 PROGRESSIVE BUTTON 14 LINE IN2 VIDEO INPUT JACK 15 LINE IN2 AUDIO L, R INPUT JACK 16 EJECT BUTTON
12
3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 DVD DECK 2 VIDEO CASSETE COMPARTMENT 3 STANDBY/ON BUTTON 4 REW/SKIP BACK BUTTON 5 STOP BUTTON 6 PLAY/STILLBUTTON
7 F.F / SKIP NEXT BUTTON 8 RECORD BUTTON 9 EZ VIEW BUTTON 10 OPEN/CLOSE BUTTON 11 PROGRAME SELECTION BUTTON 12 DVD SELECT BUTTON
13 VCR SELECT BUTTON 14 LINE IN2 VIDEO INPUT JACK 15 LINE IN2 AUDIO INPUT JACK 16 EJECT BUTTON
(DVD-V540)
(DVD-V440)
(DVD-V340)
ENG-6

Rear View of the DVD-VCR

1 RF ANTENNA INPUT 2 RF OUT TO TV 3 LINE IN 1 4 LINE OUT TO TV (COMPOSITE)
5 AUDIO LINE OUT TO TV
(S-VIDEO OR COMPONENT)
6 DIGITALAUDIO OUT SOCKET
(COAXIAL)
7 COMPONENT VIDEO OUT 8 DIGITALAUDIO OUT SOCKET
(OPTICAL)
9 S-VIDEO OUT JACK
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR). Together with your DVD-VCR, you will find the following accessories in the box.

Accessories

O P E N / C L O
S E
S T A N D
B Y / O N
REMOTE CONTROL
& BATTERIES
AUDIO & VIDEO
CABLE
★
(DVD-540/SV-DVD440)
OWNER’S
INSTRUCTIONS
COAXIAL CABLE
1 2 3 4 5 6 7 8 9
(DVD-V340)
(DVD-V540/DVD-V440)
1 RF ANTENNA INPUT 2 RF OUT TO TV 3 LINE IN 1 4 LINE OUT TO TV (COMPOSITE)
5 AUDIO LINE OUT TO TV
(S-VIDEO OR COMPONENT)
6 DIGITALAUDIO OUT SOCKET
(COAXIAL)
7 COMPONENT VIDEO OUT 8 S-VIDEO OUT JACK
1 2 3 4 5 6 7 8
ENG-7

Connecting DVD-VCR to the TV using the Coaxial Cable

Display Indicators

To receive television programmes a signal must be received from one of the following sources:
◆
An outdoor aerial
◆
An indoor aerial
◆
A cable television network
◆
A satellite receiver
☛
Make sure that both the television and the DVD­VCR are switched off before connecting the cables.
1 Remove the aerial or network input cable from the
television.
2 Connect this cable to the 75Ω coaxial socket
marked on the rear of your DVD-VCR.
3 Plug the coaxial cable supplied into the socket
on your DVD-VCR.
4 Plug the other end of the coaxial cable into the
connector previously used for the aerial on the television.
5 To obtain better quality pictures and sound on your
television, you can also connect your DVD-VCR to the television via the RCA cable (see next page) if your television is equipped with this type of connection.
6
1 The DVD Deck is active 2 A DVD, CD, VCD, or SVCD is loaded 3 The time, counter position, time remaining or
current deck status is displayed
4 VHS tape is inserted 5 The VCR Deck is active 6 ATimer Recording is programmed or in progress.
1 2 3 4 5
TV

Inserting Batteries in the Remote Control

You must insert or replace the batteries in the remote control when you:
◆
Purchase the DVD-VCR
◆
Find that the remote control is no longer working correctly
1 Push the tab in the direction of the arrow to release
the battery compartment cover on the rear of the remote control.
2 Insert two AAA, RO3 or equivalent batteries, taking
care to respect the polarities:
◆
+ on the battery with + on the remote control
◆
– on the battery with – on the remote control
3 Replace the cover by aligning it with the base of
the remote control and pushing it back into place.
➢
Do not mix different battery types (manganese and alkaline for example).
2
4
3
1
TV
ENG-8
Your DVD-VCR will automatically set itself up when it is plugged into the mains for the first time. TV stations will be stored in memory. The process takes a few minutes. Your DVD-VCR will then be ready for use.
1 Connect the coaxial cable as indicated on page 7.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2 Plug the DVD-VCR into the mains.
Result: The Language Set menu is displayed.
3 Select the required language by pressing the
or
❷
buttons.
4 Press OK to store the language selected.
Result:
A message appears.
5 Press OK button. 6 Press OK to start the auto scanning.
◆
The number of stations automatically stored by theVCR depends on the number of stations that it has found.

Connecting DVD-VCR to the TV using the RCA Cable

Connecting DVD-VCR to a Satellite Receiver or Other Equipment

You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available on the television. You thus:
◆
Obtain better quality sound and pictures
◆
Simplify the setting up procedure of your DVD-VCR
☛
Regardless of the type of connection chosen, you must always connect the coaxial cable supplied. Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
☛
Make sure that both the television and the DVD­VCR are switched off before connecting the cables.
1 Connect the coaxial cable as indicated on page 7. 2 Connect one end of the RCAAudio/Video cable to
the Video output and Audio L, R output socket on the rear of the DVD-VCR.
3 Plug the other end into the appropriate connector
on the television.
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following illustrations give a few examples of the connection possibilities.
➢
The RCA input/output connectors on the rear of the DVD-VCR are used for equipment, such as camcorders, VCRs or sound systems.
Aerial
RF coaxial cable
TV
REAR OF THE
DVD-VCR
Camcorder
VCR
Sound system
3
2

Plug & Auto Set up

ENG-9
Plug & Auto Set up

Tuning Your Television for the DVD-VCR

You must tune your television for the DVD-VCR only if you are not using a RCA cable
➢
To view pictures from your DVD-VCR when a RCA cable is used, the television must be set to the audio/video mode (AV).
1 Switch on the television. 2 Switch on the DVD-VCR by pressing
STANDBY/ON on the front of the DVD-VCR or STANDBY/ON on the remote control.
3 Select a programme position on the television to be
reserved for use with your DVD-VCR.
4 Insert the video cassette in the DVD-VCR. Check
that the DVD-VCR starts reading the cassette; if not, press
❿
II
button.
5 Start a scan on your television or set the television
to UHF channel 36 (Australia:UHF 38 CH).
6 Fine tune the television until the pictures and sound
are obtained clearly.
Auto setup
Please wait
00 %
Clock Set
12 : 00 1/JAN 2004
THU
Time Date Year
➢
Auto preset can be performed by pressing ■on the VCR continuously for 5 seconds or more with no tape inserted.

Deck Control Keys

The DVD-VCR uses one set of controls to operate both decks. The following keys are helpful in successfully controlling each deck.
1 Standby/on Button
Press the STANDBY/ON button on the remote control or front panel to turn on the DVD-VCR.
2 DVD Button
Press the DVD button on the remote control when you want to control the DVD deck.
◆
The DVD indicator will light on the Front Panel Display to show that the DVD deck is selected.
3 VCR Button
Press the VCR button on remote control when you want to control the VCR deck.
◆
The VCR indicator will light on the Front Panel Display to show that VHS deck is selected.
4 INPUT SEL. BUTTON
Press the INPUT SEL. button repeatedly to cycle through all of your input sources, including the Tuner (PR##), Line 1 (rear AV input), and Line 2 (front AV input).
• Input select is only available when the VCR deck is selected.
➢
Before using the VCR operation of 10~28 pages, press the VCR button on the remote control to select VCR mode.
Before using the DVD operation of 29~45 pages, press the DVD button on the remote control to select and watch DVD.
7 If you cannot find the pictures and sound, or there
is interference from nearby channels, it may be necessary to change the setting of the DVD-VCR output channel (see Setting the DVD-VCR Output Channel on page 14 and Problems and Solutions on page 47).
8 When the picture and sound are perfectly clear,
store this channel at the desired programme position on the television. Result: That programme is now reserved for use
with your DVD-VCR.
ENG-10

Setting the Menu Language

1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Use the ,
❷
buttons to highlight Language,
then press the OK or ❿.
3 Place the selection arrow next to your desired
Language, then press the OK button.
4 On completion, press RETURN to exit the menu.
Français Deutsch Español Italiano Nederlands
Language Set
English

Setting the Date and Time

Your DVD-VCR contains a 24-hour clock and calendar used to:
◆
Automatically stop programme recording
◆
Preset your DVD-VCR to record a programme automatically
You must set the date and time when:
◆
You purchase the DVD-VCR
☛
◆
Do not forget to reset the time when you change clocks from winter to summer time and vice versa.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding ,
❷
buttons to select
the Clock option.
3 Press the OK or
❿
to select this option.
Result: The Clock Set menu is displayed.
4 Press
➛
or ❿to select the hour, minutes, day, month and year. Result: The option selected highlight.
5 Press the
➛
or ❿buttons to increase or decrease the value. Result: The day of the week is displayed
automatically.
➢
You can hold the
,❷
buttons down to scroll
more quickly through the values.
6 On completion, press RETURN to exit the menu.
Time Date Year
Clock Set
12 : 00 1 / JAN / 2004 THU
PyccÍËÈ
ENG-11

Presetting the Stations Automatically

☛
You do not need to preset the stations if you
have already set them automatically (see Plug &
Auto Set Up on page 9).
Your DVD-VCR contains a built-in tuner used to receive television broadcasts.
You must preset the stations received through the tuner. This can be done:
◆
Plug & Auto Set up (see page 9)
◆
Automatically
◆
Manually (see page 12)
You can store up to 80 stations.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding ,
❷
buttons to select
the Install option.
3 Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
Auto Setup
Manual Setup VCR Output CH : CH 38
Install
Auto Setup
Manual Setup TV System : G VCR Output CH : CH 36
Install
4 Press the corresponding ,
❷
buttons, until the Auto Setup is selected. And then press the OK or ❿to select this option. Result: A message appears, indicating that any
channels already preset on your DVD-VCR will be deleted.
5 Press OK to start the auto scanning.
Result:◆The Please Wait indication highlight on
the television screen.
◆
The first frequency band is scanned and the first station found is displayed and stored.
◆
The DVD-VCR then searches for the second station and so on.
◆
When the automatic scanning procedure has finished, the DVD-VCR switches automatically to programme 1.
➢
The number of stations automatically stored by the DVD-VCR depends on the number of stations that it has found.
6 If you wish to cancel the auto scanning before the
end, press the MENU button to exit the menu.
➢
Once the auto scanning procedure has finished, some stations may have been stored more than once; select the stations with the best reception and delete the ones no longer required . (See page 13)
Australia
Model
Newzealand
Model
Auto Setup
Your data will be lost
Press OK to continue Menu to exit
Auto Setup
Please Wait 15%
7 Press the
❿
button to preset the station.
Result: The MANUAL TUNING menu is displayed.
8 Press the
➛
or ❿buttons to start scanning the channels. Result: The frequency band is scanned and the
first station found is displayed.
9 Press the ,
❷
buttons until the NAME is selected. The station name is set automatically from the broadcast signal.
10 To change the programme’s name, press the
❿
button.
Result: The first letter of the name flashes.
MANUAL TUNING
PR : CH : - - MFT : ­NAME : - - - -
MEMORY : OK
RETURN
ENG-12

Presetting the Stations Manually

☛
You do not need to preset the stations manually if
you have already set them automatically.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding ,
❷
buttons to select the
Install option.
3 Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
11 To... Then...
Select a character Press the
,❷
button until the
in the name required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the
➛
or ❿buttons
previous character respectively.
12 If you... Then...
Wish to store the
◆
Press the
,❷
buttons
station displayed until the MFT is selected.
◆
Press the
➛,❿
buttons to
adjust the picture, if necessary.
◆
Press OK to store the station
Do not wish to
◆
Press the
,❷
buttons store the station until the CH is selected. displayed
◆
Press the
➛,❿
buttons to
go on scanning the
frequency band and display the next station
◆
Go back to the beginning of
Step 14
13 Repeat this procedure from Step 6 onwards, until
all the required stations have been stored.
14 On completion, press the RETURN button three
times to exit the menu.
Auto Setup
Manual Setup
Install
TV System : G VCR Output CH : CH 36
Auto Setup
Manual Setup
Install
VCR Output CH : CH 38
4 Press the corresponding ,
❷
buttons, until the
Manual Setup option is selected.
5 Press the OK or
❿
to select a Manual Setup option.
Result: The TV STATION TABLE menu is
displayed.
6 Press the ,
❷
buttons to select a programme
number as required.
TV STATION TABLE
PR CH NAME 1 2 3 4 5
SWAPPING : OK DELETE : CLEAR RETURN
Australia
Model
Newzealand
Model

ENG-13

Clearing a Preset Station Changing the Preset Station Table

☛
If you have stored a TV station:
◆
That you do not require
◆
At the wrong programme position you can cancel it.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding ,
❷
buttons to select
the Install option.
3 Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
You can rearrange the Station Table and give different programme numbers to the stations listed according to your own preferences.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding ,
❷
buttons to select
the Install option.
3 Press the OK or
❿
buttons to select this option.
Result: The Install menu is displayed.
PR CH NAME 1 21 2 3 4 5
- - - -
TV STATION TABLE
SWAPPING : OK DELETE : CLEAR RETURN
PR CH NAME 1 2 3 21 4 5
- - - -
TV STATION TABLE
SWAPPING : OK DELETE : CLEAR RETURN
Auto Setup
Manual Setup
Install
TV System : G VCR Output CH : CH 36
Auto Setup
Manual Setup
Install
VCR Output CH : CH 38
Australia
Model
Newzealand
Model
Australia
Model
Newzealand
Model
4 Press the corresponding ,
❷
buttons, until the
Manual Setup option is selected.
5 Press the OK or
❿
to select a Manual Setup option.
Result: The TV STATION TABLE menu is
displayed.
6 Press the corresponding ,
❷
buttons, until the
required preset TV station (PR) is selected.
7 Press the CLEAR button. 8 Repeat the same procedure from Step 6 onwards
until all the required stations have been cleared.
9 On completion, press the RETURN button four
times to exit the menu.
PR CH NAME 1 21 2 3 4 5
TV STATION TABLE
SWAPPING : OK DELETE : CLEAR RETURN
4 Press the corresponding ,
❷
buttons, until the
Manual Setup option is selected.
5 Press the OK or
❿
button to select this option.
Result: The TV STATION TABLE menu is
displayed.
Auto Setup
Manual Setup VCR Output CH : CH 38
Auto Setup
Manual Setup TV System : G VCR Output CH : CH 36
Install
Install
ENG-14
You can choose the sound mode (B/G or D/K) according to the TV set connected to your VCR.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding ,
❷
buttons to select
the Install option.
3 Press the OK button to select this option.
Result: The Install menu is displayed.
4 Press the OK or
❿
buttons, until the TV System
option is selected.
5 Press the OK or
❿
button to select G or K.
6 On completion, press RETURN to exit the menu.
Your DVD-VCR output channel may need to be changed if the pictures suffer from interference or if your TV cannot find the pictures. Also, you can change the DVD-VCR output channel to adjust the frequency in which information is displayed on the screen.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding ,
❷
buttons to select
the Install option.
3 Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
4 Press the ,
❷
buttons, until the VCR Output CH
option is selected.
5 Select the required output channel (CH21 ~ CH69)
by pressing the OK or ❿buttons, and ➛buttons. (Australia:CH28 ~ CH69).
(Australia Model)
➝
CH28 ↔.. CH38 ↔.. CH69
(Newzealand Model)
➝
CH21 ↔.. CH36 ↔.. CH69
6 On completion, press RETURN to exit the menu.
Then tune your television again (see page 9).

Setting the DVD-VCR Output Channel

Selecting the RF OUT Sound Mode (B/G-D/K) (Newzealand Model only)

Auto Setup
Manual Setup
Install
TV System : G VCR Output CH : CH 36
G K
Auto Setup
Manual Setup VCR Output CH : CH 38
Install
Auto Setup
Manual Setup TV System : G VCR Output CH : CH 36
Install
Australia Model
Newzealand Model
CH:28
:
CH:38
:
CH:69
CH:21
:
CH:36
:
CH:69
6 Press the corresponding ,
❷
buttons, until the required preset TV programme is selected. Result: The selected station is displayed at the
same time on the television screen.
7 To change the programme number assigned to a
station press the OK button on the remote control. (For example, To move a TV station in programme 1 to programme 3)
8 Press the ,
❷
buttons to select required position.
And then press OK again to swap the position.
9 On completion, press the RETURN button four
times to exit the menu.
➝
➝
Loading...
+ 35 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use