Samsung DVD-S427, DVD-S227, DVD-S127 User Manual [en, nl]

AK68-00015Y

VD PLA

YER

VD-SPELER

DVD-S127 DVD-S227 DVD-S327 DVD-S427

ENG NL

ENGENG

Precautions Precautions

2 3

Ensure that the mains supply in your house complies with that indicated on the identification sticker located at the back of your play. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7~10cm). Make sure the ventilation slots are not covered. Do not stack other, or heavy devices on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to the stand-by mode does not disconnect the electricity supply In order to separate the player completely from the mains,it has to be disconnected by unplugging the main plug, especially when left unused for a long period of time.

1. Setting up

Protect the player from moisture (dripping or splashing and objects filled with liquids), and excess heat (e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the mains electricity supply if the player malfunctions. Your player is not intended for industrial use but for domestic purposes only. Use of this product is for personal use only. If your player or disc has been stored in a cold atmosphere for example during transportation in the winter, wait for approximately 2 hours until they have reached room temperature, before use.

2. Caution

Never open the player or any of its components. It can be dangerous for you or certain fragile components. You could receive an electric shock or touch the laser beam. Do not place your eyes close to the opening of the disc tray or any other opening to look inside the player.

3. For your safety

Be careful handle your discs with care. Hold a disc with finger on the border or hole. Always place disc with the label facing upward (in case of a single side disc ). Always use a soft cloth to clean disc if necessary, wipe from the centre to the border. Always put disc back into their cases after playing and store in vertical position. Always place the disc properly into the tray using the proper guide area. Never use record cleaning sprays, benzine, static electricity liquids or any other solvent, if the disc surface is dirty. Wipe gently with a soft damp (water only) cloth, never wipe the disc in a circular motion, since circular scratches are likely to occur and could cause noise during playback.

4. Disc

The battery used in this product contains chemicals that are harmful to the environment. Do not dispose of batteries in the general household waster. It is recommended that the replacement of the battery should be done by a technician.

5. Battery

For safety reasons, be sure to disconnect the AC power cord from the AC outlet.

• Do not use benzene, thinner, or other solvents for cleaning.

• Wipe the cabinet with a soft cloth.

6. Maintenance of cabinet

2 3

4 5

ENGENG

Before You Start

Accessories

Install Batteries in the

Remote

If remote doesn’t operate

properly:

Remote Control/Batteries (AA Size)

User’s Manual

Video/Audio Cable

Open the battery cover on the back of the remote.

Insert two AA batteries. Make sure that the polarities (+ and -) are aligned correctly.

Replace the battery cover.

• Check the polarity + - of the batteries (Dry-Cell)

• Check if the batteries are drained.

• Check if remote sensor is blocked by obstacles.

• Check if there is any fluorescent lighting nearby.

TABLE OF CONTENTS

General Features..............................................................................................6

Disc Type and Characteristics .......................................................................... 7

Description-Front Panel ....................................................................................8

Display Indicators ..........................................................................................10

Description-Rear Panel ..................................................................................1 1

Tour of the Remote Control..............................................................................14

Choosing a Connection ..................................................................................20

Playing a Disc................................................................................................22

Using the Search & Skip Functions ..................................................................24

Using the Display Function..............................................................................25

Repeat Play ..................................................................................................26

Program Play & Random Play ........................................................................27

S.FIT Play ......................................................................................................28

Digest Play ....................................................................................................29

Using the Disc View Function..........................................................................30

Slow Repeat play ..........................................................................................31

Selecting the Audio Language ........................................................................32

Selecting the Subtitle Language ......................................................................33

Changing the Camera Angle..........................................................................34

Using the Instant Replay Function....................................................................35

Using the Bookmark Function..........................................................................36

Using the Zoom & 3D Sound Functions ..........................................................................37

MP3 Play ........................................................................................................................38

Using the Setup Menu ....................................................................................40

Setting Up the Language Features ..................................................................41

Setting Up the Parental Control ......................................................................43

Setting Up the Audio Options ........................................................................44

Surround Sound Speaker Setup ......................................................................45

Setting Up the Display Options ......................................................................46

Controlling a TV with the Remote ....................................................................47

Troubleshooting..............................................................................................48

Specifications ................................................................................................49

4 5

SETUP

CONNECTIONS

BASIC

FUNCTIONS

ADVANCED

FUNCTIONS

CHANGING

SETUP MENU

REFERENCE

Easy Remote Control(DVD-S427 only)/

Batteries (AA Size)

ENGENG

General Features

Disc Type and Characteristics

COPY PROTECTION

Disc Markings

Play Region Number

• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD

discs.

• This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

This DVD player is capable of playing the following types of discs with the corresponding logos:

12 Cm

8 Cm

Single-sided

240 min.

Double-sided

480 min.

Single-sided

80 min.

Double-sided

160 min.

Audio

Video

Audio

Video

Audio

• CD is recorded as a Digital Signal with better audio quality, less distortion and less deterioration of audio quality over time.

• Video with CD sound, VHS

quality & MPEG-1 compression technology.

• DVD contains excellent sound

and video due to Dolby Digital and MPEG-2 system.

• Various screen and audio

functions can be easily selected through the onscreen menu.

VIDEO-CD

AUDIO-CD

12 Cm

8 Cm

74 min.

20 min.

12 Cm

8 Cm

74 min.

20 min.

Disc Types

(Logos)

Recording

Types

Disc Size

Max.

Playing Time

Characteristics

DVD

DIGITAL

SOUND

STEREO

PAL

• Play Region Number

• PAL broadcast system in U.K, France, Germany, etc.

• Dolby Digital disc

• Stereo disc

• Digital Audio disc

• DTS disc

Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.

The Region Number for this player is described on the rear panel of the player.

6 7

SETUP

Excellent Sound

Dolby Digital, a technology developed by Dolby Laboratories provides crystal clear sound reproduction.

Screen

Video with MPEG-2 compression technology. Both regular and widescreen(16:9) pictures can be viewed.

Slow Motion

An important scene can be viewed in slow motion.

Programmed Play

You can program tracks to play in desired order.

Parental Control

The parental control allows users to set the level necessary to prohibit children from viewing harmful movies such as those with violence, adult subject matter, etc.

Various On-Screen Menu Functions

You can select various languages(Audio/Subtitle) and screen angles while enjoying movies.

Repeat

You can repeat a song or movie simply by pressing the REPEAT button.

MP3

This unit can play discs created from MP3 files.

Instant Replay

This function is used to replay the previous 10 seconds of the movie from the current position.

Easy Remocon (DVD-S427 only)

You can easily operate this player by combining only the functions that are frequently used.

* Discs which cannot be played with this player:

• DVD-ROM • DVD-RAM

• CD-ROM • CDV

• CDI

• HD layer of super Audio CD

• CDGs play audio only, not graphics.

* Ability to play back may depend on recording

conditions:

• DVD-R • CD-RW

• DVD+RW, -RW

NOTE

• MP3 disc

ENGENG

Description-Front Panel Description-Front Panel

Front Panel Controls

1. STANDBY / ON

• When the unit is first plugged in, the indicator lights. When STANDBY/ON is pressed on again, the light goes out and the player is turned on.

2. HEADPHONES JACK

• You can attach headphones here for private listening.

3. HEADPHONES VOLUME

• Use to adjust headphones volume level.

4. DISC TRAY

• Load the disc here.

5. DISPLAY

• Operation indicators are displayed here.

6. OPEN/CLOSE

• Press to open and close the disc tray.

7. PLAY/PAUSE

• Begin or pause disc play.

8. STOP

• Stops disc play.

9. SKIP

• Use to skip a scene or music.

10. JOG

• Use to access certain Shuttle features with the Shuttle dial : When JOG is pressed, indicator lights up.

11. SHUTTLE

• Use during DVD and CD play to fast forward or reverse. In JOG mode(JOG button pressed), used for frame advance/CD track selection.

8 9

SETUP

OPEN/CLOSE

STOPPLAY/PAUSE

SKIP

DVD-S127

DVD-S327/DVD-S427

1456789

123 4567891011

OPEN/CLOSE

DVD-S227

56789

ENGENG

Rear Panel

1. DIGITAL AUDIO OUT JACKS

• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.

2. ANALOG AUDIO OUT JACKS

• Connect to an amplifier with 5.1ch analog input jacks.

3. MIXED AUDIO OUT JACKS

• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.

4. VIDEO OUT JACKS

• Use a video cable to connect to the Video input jack on your television.

5. S-VIDEO OUT JACK

• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality picture. The S-Video must be selected in the VIDEO OUT SELECT.

6. COMPONENT VIDEO OUT JACKS

• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video. Along with S-Video, Component Video provides the best picture quality. The Y, Pb, Pr must be selected in the VIDEO OUT SELECT.

7. VIDEO OUT SELECT SWITCH

• Use the switch to set video out. If Y, Pb, Pr is selected, S-Video may not work. If S-Video is selected, Y, Pb, Pr may not work.

SETUP

Description-Rear PanelDisplay Indicators

10 11

Front Panel Display

1. Angle indicator. You can select multiple angles of a scene recorded by different cameras.

2. Disc type indicators

3. Play /

Pause / Forward play

4. DVD : Title, Chapter number.

5. Video/Audio CD : Track number

6. Repeat play mode

7. MP3 indicators

8. Displays various messages concerning operations such as PLAY, STOP, LOAD, ...

no DISC : No disc loaded. OPEN : The disc tray is open. LOAD : Player is loading disc information.

45 6 7

12 34567

DVD-S427

* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.

NOTE

ENGENG

12 13

SETUP

Description-Rear PanelDescription-Rear Panel

Rear Panel

1. DIGITAL AUDIO OUT JACKS

• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.

2. ANALOG AUDIO OUT JACKS

• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.

3. VIDEO OUT JACKS

• Use a video cable to connect to the Video input jack on your television.

4. S-VIDEO OUT JACK

• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality picture. The S-Video must be selected in the VIDEO OUT SELECT.

5. COMPONENT VIDEO OUT JACKS

6. VIDEO OUT SELECT SWITCH

• Use the switch to set video out. If Y, Pb, Pr is selected, S-Video may not work. If S-Video is selected, Y, Pb, Pr may not work.

DVD-S127/DVD-S227

DVD-S327

123456

23456

* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.

NOTE

ENGENG

Tour of the Remote Control

DVD-S127/DVD-S227

Tour of the Remote Control

DVD Function Buttons

1. DVD POWER Button

2. NUMBER Buttons

3. STEP Button

• Advances play one frame at a time.

4. ZOOM Button

5. S.FIT Button

6. SEARCH Buttons

•

Allows you to search forward/backward through a disc.

7. STOP Button

8. MENU Button

• Brings up the Disc menu.

9. TOP MENU Button

10. CLEAR Button

•

Use to remove menus or status displays from the screen.

11. BOOKMARK Button

12. SETUP Button

• Brings up the DVD player’s Setup menu.

13. OPEN/CLOSE Button

14. 3D Button

15. DIGEST Button

16. PLAY/PAUSE Button

• Begin/Pause disc play.

17. SKIP Buttons

• Use to skip the title, chapter, or track.

18. RETURN Button

• Returns to a previous menu.

19. DISPLAY Button

• Displays the current disc mode.

20. ENTER/DIRECTION Button (UP/DOWN or LEFT/RIGHT Buttons)

• This button functions as a toggle switch.

21. ANGLE Button

• Use to access various camera angles on a DVD.

22. MODE Button

• Allows you to program a specific order.

23. SUBTITLE Button

24. AUDIO Button

•

Use this button to access various audio functions on a disc.

25. REPEAT A-B Button

• Use to mark a segment to repeat between A and B.

26. REPEAT Button

•

Allows you to repeat play a title, chapter, track, or disc.

27. I.REPLAY Button

•

This function is used to replay the previous 10 seconds of the movie from the current position.

SETUP

14 15

113

16 17 18

19 20

21 22

23 24

25 26

3 4

5 6

7 8

11 12

ENGENG

Tour of the Remote Control

DVD-S327

Tour of the Remote Control

DVD Function Buttons

1. DVD POWER Button

2. NUMBER Buttons

3. STEP Button

4. VOLUME Buttons

5. TV/VIDEO Button

6. ZOOM Button

7. S.FIT Button

8. SEARCH Buttons

•

Allows you to search forward/backward through a disc.

9. STOP Button

10. RETURN Button

• Returns to a previous menu.

11. SETUP Button

• Brings up the DVD player’s Setup menu.

12. SUBTITLE Button

13. ANGLE Button

• Use to access various camera angles on a DVD.

14. MENU Button

• Brings up the Disc menu.

15. CLEAR Button

•

Use to remove menus or status displays from the screen.

16. SLOW Button

17. TV POWER Button

18. 3D Button

19. OPEN/CLOSE Button

20. CHANNEL Buttons

21. DIGEST Button

22. PLAY/PAUSE Button

• Begin/Pause disc play.

23. SKIP Buttons

• Use to skip the title, chapter, or track.

24. BOOKMARK Button

25. DISPLAY Button

• Displays the current disc mode.

26. AUDIO Button

•

Use this button to access various audio functions on a disc.

27. ENTER/DIRECTION Button (UP/DOWN or LEFT/RIGHT Button)

•This button functions as a toggle switch.

28. TOP MENU Button

29. REPEAT Button

•

Allows you to repeat play a title, chapter, track, or disc.

30. MODE Button

• Allows you to program a specific order.

31. REPEAT A-B Button

•

Use to mark a segment to repeat between A and B.

32. I.REPLAY Button

•

This function is used to replay the previous 10 seconds of the movie from the current position.

SETUP

16 17

19 20

22 23 24

25 26

27 28

29 30

3 4

5 6

7 8

10 11

12 13

15 16

ENGENG

18. TV POWER Button

19. SLOW Button

20. 3D Button

21. OPEN/CLOSE Button

22. CHANNEL Buttons

23. DIGEST Button

24. PLAY/PAUSE Button

• Begin/Pause disc play.

25. SKIP Buttons

• Use to skip the title, chapter, or track.

26. RETURN Button

• Returns to a previous menu.

27. DISPLAY Button

• Displays the current disc mode.

28. ANGLE Button

• Use to access various camera angles on a DVD.

29. MODE Button

• Allows you to program a specific order.

30. SUBTITLE Button

31. AUDIO Button

•

Use this button to access various audio functions on a disc.

32. REPEAT A-B Button

• Use to mark a segment to repeat between A and B.

Tour of the Remote Control Tour of the Remote Control

DVD Function Buttons

1. DVD POWER Button

2. I.REPLAY Button

•

This function is used to replay the previous 10 seconds of the movie from the current position.

3. NUMBER Buttons

4. SETUP Button

• Brings up the DVD player’s Setup menu.

5. VOLUME Buttons

6. TV/VIDEO Button

7. ZOOM Button

8. S.FIT Button

9. STOP Button

10. MENU Button

• Brings up the Disc menu.

11. TOP MENU Button

12. ENTER/DIRECTION Button (UP/DOWN or LEFT/RIGHT buttons)

• This button functions as a toggle switch.

13. CLEAR Button

•

Use to remove menus or status displays from the screen.

14. BOOKMARK Button

15. REPEAT Button

•

Allows you to repeat play a title, chapter, track, or disc.

16. JOG DIAL

• Operates frame by frame play. In CD mode,

performs track search.

17. SHUTTLE DIAL

• Performs fast or slow motion play.

SETUP

18 19

DVD-S427

SLOW

I.REPLA Y

18 19

21 22

23 24

25 26

28 29

30 31

2 3

4 5

6 7

8 9

10 11

13 14

16 17

25 24

(Easy Remote Control)

ENGENG

Choosing a Connection Choosing a Connection

The following show examples of connections commonly used to connect the DVD player with a TV and other components.

Before Connecting the DVD Player

• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

• Refer to the owner’s manual of the additional components you are connecting for more information on those particular components.

CONNECTIONS

20 21

Connection to an Audio System

Method 1

Method 2

Method 3

Front (RH) Front (LH) Center

Rear (RH) Rear (LH) Subwooper

R FRONT L

R SURROUND L

CENTER

S/W

MIXED AUDIO OUT

Mixed Audio Out

Analog Audio Out

Digital Audio Out

2ch Amplifier

Audio Input Jacks

5.1ch Analog Amplifier Audio Input Jacks

Dolby Digital Decoder

Digital Audio Input Jacks

AUDIO

DVD

Connection to a TV (For Video)

TV (Normal, Widescreen, Projection, etc..)

Good picture

Basic Audio

Better picture

Best picture

Method 1

Method 2

Method 3

NOTE

• If Y, Pb or Pr is selected, S-Video will not work.

• If S-Video is selected, Y, Pb or Pr will not work.

MIXED AUDIO OUT

Audio Output Jacks

AV Cable

S-Video

Cable

Video Cables

Video Output Jack

S-Video Jack

Component Video

Jacks

DVD

• Method 1 DVD Player + TV with Video Input Jack

• Method 2 DVD Player + TV with S-Video Input Jack

(If S-Video is selected in the VIDEO OUT SELECT.)

• Method 3 DVD Player + TV with Component Video Jacks (If Y, Pb or Pr is selected in the VIDEO OUT SELECT.)

ENGENG

Playing a Disc Playing a Disc

Before Play

Play

• Turn on your TV and press the TV/VIDEO button to select the video mode.

• Turn on your Audio System and select AUX, CD or DVD.

After plugging in the player, the first time you press the DVD POWER button, this screen comes up :

If you want to select the language, press a NUMBER button. (This screen will only appear the very first time you plug in the player.)

Press the OPEN/CLOSE button.

The STANDBY indicator light goes out and the tray opens.

Place a disc gently into the tray with the disc’s label

facing up.

Press the PLAY/PAUSE button or OPEN/CLOSE button

to close the disc tray.

Stopping Play

Press the STOP button during play.

Removing Disc

Press the OPEN/CLOSE button.

Pausing Play

Press the PLAY/PAUSE or STEP button on the remote during play.

- Screen stops, no sound.

- To resume again, press PLAY/PAUSE button once again.

Step Motion Play. (Except CD)

DVD-S427 : If turning JOG DIAL, you can view one by one. DVD-S127/DVD-S227/DVD-S327 : Press the STEP button on the remote during play.

- Each time the button is pressed, a new frame will appear.

- No sound is heard during STEP mode.

- Press PLAY/PAUSE to resume normal play. (You can only perform step motion play in the for ward direction.)

Slow Motion Play. (Except CD)

DVD-S127/DVD-S227/DVD-S327 : Press the SEARCH (¤¤) or REV SEARCH (ˆˆ) button on the remote during PAUSE or STEP mode. By pressing the SEARCH (¤¤) or SEARCH (ˆˆ) button, you can select slow motion play for 1/8, 1/4 or 1/2 of normal speed.

DVD-S427 : Press and hold the SKIP button to choose the play speed between 1/8X, 1/4X, and

1/2X of normal.

- No sound is heard during slow mode.

- Press PLAY/PAUSE to resume normal play.

- When playing a VCD, the reverse slow motion play will not work.

BASIC

FUNCTIONS

RESUME function

When you stop disc play, the player remembers where you stopped, so when you press PLAY again, it will pick up where you left off (unless the disc is removed, the STOP button is pressed twice or the player is unplugged.).

• If the player is left for 5 minutes in pause mode, it will stop.

• If the player is left in the stop mode for more than 30 minutes, the power will automatically shut off. (Automatic Power-Off Function)

• If the player is left in the stop mode for more than one minute without any user interaction, a screen saver will be activated, and the TV screen will fade in and out repeatedly. Press the PLAY button to resume normal play.

• This icon indicates an invalid button press.

NOTE

22 23

ENGENG

T : 01

0 : 01 : 09

Using the Search & Skip Functions Using the Display Function

During play, you can search quickly through a chapter or track or use the skip function to jump to the next selection.

Searching through a Chapter or Track

Skipping Tracks

During play, press the NEXT SKIP or BACK SKIP button.

• When playing a DVD, if you press the NEXT SKIP button, it moves to the next chapter. If you press the BACK SKIP button, it moves to the

beginning of the chapter. One more press makes it move to the beginning of the previous chapter.

• When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1 or a CD, if

you press the NEXT SKIP button, it moves to the next track. If you press the BACK SKIP button, it moves to the beginning of the track. One more press makes it move to the beginning of the previous track.

• If a track exceeds 15 minutes when playing a VCD and you press the NEXT

SKIP button, it moves forward 5 minutes. If you press the BACK SKIP button, it moves backward 5 minutes.

• When playing a VCD 2.0 in the MENU OFF or Track View function, if

you press the NEXT SKIP button, it moves to the next MENU or the next Track View display.

If you press the BACK SKIP button, it moves to the previous MENU or the previous Track View display. (See page 30.)

When Playing a DVD

When Playing a CD/VCD

BASIC

FUNCTIONS

• DVD-S127/DVD-S227 : Press the REVERSE or FORWARD

SEARCH button on the remote and press again to search at a faster speed on the DVD, VCD, CD.

• DVD-S327/DVD-S427 : Turn the shuttle diad of remote control

during disc play. Turn the Jog/Shuttle on the front can amultiple-speed operation if desiring to use the key on the front.

DVD VCD CD

2X, 4X, 8X, 16X, 32X, 128X 4X, 8X 2X, 4X, 8X

DVD

T : 01

C : 02

0 : 01 : 09

ENG 5.1CH

ENG

During play, press the DISPLAY button

on the remote.

- Current title, chapter number, elapsed time, audio, subtitle and volume control will be displayed.

• Use the NUMBER buttons to enter a different title,

then press the ENTER button.

• Use the LEFT/RIGHT or NUMBER buttons to enter

a chapter number, then press the ENTER button.

• To enter the time from which you want to start,

use the UP/DOWN buttons to select, then use the NUMBER buttons to enter the time. Then press the ENTER button.

• Use the LEFT/RIGHT buttons to change the values

of the current audio, subtitle and volume.

• To make the screen disappear, press the DISPLAY

button again.

During play, press the DISPLAY button

on the remote.

- Current track NUMBER, elapsed time and volume control will be displayed.

• Use the UP/DOWN buttons to select a track.

Use the LEFT/RIGHT buttons or NUMBER buttons to enter a different track number, then press the ENTER button.

• To enter the time from which you want to start,

use the UP/DOWN buttons to select, then use the NUMBER buttons to enter the time. Press the ENTER button.

• To change the value of the volume, use the

LEFT/RIGHT buttons.

- To make the screen disappear, press the DISPLAY button again.

In VCD 2.0 mode (MENU ON mode), only the volume control will appear on screen.

VCD

T : 01

0 : 01 : 09

VCD

What is a Chapter?

Each Title on a DVD is usually divided into chapters (similar to tracks on an audio CD).

What is a Title?

A DVD may contain several different titles. For example, if a disc contains four different movies, each might be considered a title.

NOTE

24 25

ENGENG

Repeat Play Program Play & Random Play

Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.

When playing a DVD

Press the REPEAT button on the remote. Repeat screen appears.

Select Chapter, Title or A-B using the

LEFT/RIGHT buttons.

- Repeat A-B

• Press the REPEAT button. Select A-B on screen with the LEFT/RIGHT buttons or press the A-B button on the remote.

• Press ENTER at the point where you want the repeat play to start (A). The B is automatically highlighted.

• Press ENTER at the point where you want the repeat play to stop (B).

Press ENTER.

To return to normal play, press REPEAT again,

then press the LEFT/RIGHT buttons to select Off and press ENTER.

NOTE

• DVD repeats play by chapter or title, CD and VCD repeat play by disc or track. See page 38 to MP3 disc repeat play.

• Depending on the disc, the Repeat function may not work.

• If the title or track is completed before marking the end (B), the end of title or track becomes B automatically.

• When in VCD 2.0 mode (MENU ON mode), this function does not work.

NOTE

• Depending on the disc, the Program and Random Play function may not work.

• When in VCD 2.0 mode (MENU ON mode), these functions do not work.

• To resume normal play, press the CLEAR button.

Program Play (DVD/VCD/CD/MP3)

Random Play (DVD/VCD/CD/MP3)

Press the MODE button.

Use the LEFT/RIGHT buttons to select PROGRAM. Press the ENTER button.

Use the LEFT/RIGHT buttons to select the first

chapter (or track) to add to the program. Press the ENTER button. The selection numbers appear in the Program Order box.

Press the PLAY/PAUSE button.

The disc will be played in programmed order.

Press the MODE button.

Use the LEFT/RIGHT buttons to select RANDOM. Press the ENTER button.

The disc will be played in random order.

BASIC

FUNCTIONS

DVD

VCD/CD

26 27

ENGENG

S.FIT Play

Digest Play

Screen Fit Play

During play, press the DIGEST button.

- You'll see the 9 individual windows representing each of the chapters on the TV screen.

- When each window is displayed, the first 3 seconds of the chapter will be played.

Press UP/DOWN/LEFT/RIGHT buttons or NUMBER

buttons to select the window you'd like to see, and press the ENTER button.

- Up to 9 windows(chapters) can be displayed on the screen at a time.

- Press the 'Skip' button for the next 9 chapters if the movie has more than 9.

During play, press S.FIT button on remote control.

- Allows you to eliminate the black bars in the top and bottom of the screen when a movie is playing in the Widescreen format(16:9).

- Screen Fit will not work when the Zoom mode is active.

(you can not remove the black bars on the screen) However, Zoom mode will work when Screen Fit is active.

NOTE

• Various aspect ratios are available only in multiple screen format discs.

• This function does not work when a DVD has been recorded with a multi-camera angle format.

• On some DVDs, the black bars cannot be eliminated due to their aspect ratio.

Digest Play

NOTE

• You can play the DVD player starting with the desired chapter after directly moving to the scene you want.

• 'DIGEST' may not operate depending on the disc in use.

ADVANCED

FUNCTIONS

28 29

SKIP button

+ 34 hidden pages