SAMSUNG DVD-HR773A, DVD-HR775A User Manual

DVD

user manual

DVD-HR773 DVD-HR775 DVD-HR777

imagine the possibilities

Thanks you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

getting started

WARNING

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.

Do not install this equipment in a conﬁ ned space such as a bookcase or similar unit.

WARNING : To prevent damage which may result in ﬁ re or electric shock hazard, do not expose this appliance to

rain or moisture.

CAUTION : HDD & DVD RECORDER USES AN INVISIBLE LASER BEAM WHICH CAN CAUSE HAZARDOUS

RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE HDD & DVD RECORDER CORRECTLY AS INSTRUCTED.

CAUTION

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. This product satisﬁ es CE regulations when shielded cables and connectors are used to connect the unit to other

equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

IMPORTANT NOTE

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug. If it requires replacing, a fuse approved to BS1362 of the same rating must be used.

Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer.

If the ﬁ tted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.

However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains jack, as there is a risk of shock hazard from the bared ﬂ exible cord.

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

The product unit accompanying this user manual is licenced under certain intellectual property rights of certain third parties. This licence is limited to private non-commercial use by end-user consumers for licenced contents.

No rights are granted for commercial use. The licence does not cover any product unit other than this product unit and the licence does not extend to any

unlicenced product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The licence only covers the use of this product unit to encode and/or decode audio ﬁ les conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this licence for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates important instructions accompanying the product.

2_ getting started

PRECAUTION

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁ ers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not ﬁ t into your outlet, consult an electrician for replacement of the obsolete outlet.

10)

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, the point where they exit from the apparatus.

11)

Only use attachments/accessories speciﬁ ed by the manufacturer.

12)

Use only with the cart, stand, tripod, bracket, or table speciﬁ ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13)

Unplug this apparatus during lightning storms or when unused for long periods of time.

14)

Refer all servicing to qualiﬁ ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

GETTING STARTED

Handling Cautions

Before connecting other components to this HDD & DVD RECORDER, be sure to turn them all off.

•

Do not move the HDD & DVD RECORDER while a disc is being played, or the disc may be scratched or

•

broken, the HDD & DVD RECORDER internal parts may be damaged. Do not put a ﬂ ower vase ﬁ lled with water or any small metal objects on the HDD & DVD RECORDER.

•

Be careful not to put your hand into the disc tray.

•

Do not place anything other than the disc in the disc tray.

•

Exterior interference such as lightning and static electricity can affect normal operation of this HDD & DVD

•

RECORDER. If this occurs, turn the HDD & DVD RECORDER off and on again with the STANDBY/ON button, or disconnect and then reconnect the AC power cord to the AC power outlet. The HDD & DVD RECORDER will operate normally.

Be sure to remove the disc and turn off the HDD & DVD RECORDER after use.

•

Disconnect the AC power cord from the AC outlet when you don’t intend to use the HDD & DVD

•

RECORDER for long periods of time. Clean the disc by wiping in a straight line from the inside to the outside of the disc.

•

Apparatus shall not be exposed to dripping or splashing and no objects ﬁ lled with liquids, such as vases,

•

shall be placed on the apparatus. The Mains plug is used as a disconnect device and shall stay readily operable at any time.

•

English _3

getting started

Maintenance of Cabinet

For safety reasons, be sure to disconnect the AC power cord from the AC outlet.

Do not use benzene, thinner, or other solvents for cleaning.

•

Wipe the cabinet with a soft cloth.

•

HDD (Hard Disk Drive)

The hard disk has a high storage density, which enables long recording durations and quick access to written data. However, it can easily be damaged by shock, vibration or dust and should be kept away from magnets. To avoid losing important data, observe the following precautions.

Do not use the HDD & DVD RECORDER in a place subject to extreme changes in temperature.

•

Do not apply a strong shock to the HDD & DVD RECORDER.

•

Do not place the HDD & DVD RECORDER in a location subject to mechanical vibrations or in an unstable

•

location. Do not place the HDD & DVD RECORDER on top of a heat source.

•

Do not disconnect the AC power cord while the power is on.

•

Do not attempt to change the hard disk. This may result in a malfunction.

•

Should the hard disk be damaged, you cannot recover lost data. The hard disk is only a temporary storage space.

Disc Handling

•

Use discs with regular shapes. If an irregular disc (a disc with a special shape) is used, this HDD & DVD RECORDER may be damaged.

Holding discs

•

Avoid touching the surface of a disc where recording is performed.

DVD-RAM, DVD±RW and DVD±R

•

Clean with an optional DVD-RAM/PD disc cleaner (LF-K200DCA1 where available). Do not use cleaners or cloths for CDs to clean DVD-RAM/±RW/±R discs.

DVD-Video, Audio-CD

•

Wipe off dirt or contamination on the disc with a soft cloth.

Cautions on handling discs

•

Do not write on the printed side with a ball-point pen or pencil.

•

Do not use record cleaning sprays or antistatic. Also, do not use volatile chemicals, such as benzene or thinner.

•

Do not apply labels or stickers to discs. (Do not use discs ﬁ xed with exposed tape adhesive or leftover peeled-off stickers.)

•

Do not use scratch-proof protectors or covers.

•

Do not use discs printed with label printers available on the market.

•

Do not load warped or cracked discs.

Disc Storage

Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.

•

Do not keep under direct sunlight.

•

Keep in a cool ventilated area.

•

Store vertically.

4_ getting started

•

Keep in a clean protection jacket.

•

If you move your HDD & DVD RECORDER suddenly from a cold place to a warm place, condensation may generate on the operating parts and lens and cause abnormal disc playback. If this occurs, do not connect the plug to the power outlet and wait for two hours. Then insert the disc and try to play back again.

Disc Speciﬁ cations

This unit allows you to record and playback high quality digital video on DVD-RAM/±RW/±R discs or on the HDD. You can also edit digital images on DVD-RAM/±RW discs or HDD.

Disc Type

DVD-Video

❖

A digital versatile disc (DVD) can contain up to 135-minutes of images, 8 audio languages and 32

•

subtitle languages. It is equipped with MPEG-2 picture compression and Dolby digital surrounding, allowing you to enjoy vivid and clear theatre quality images in the comfort of your own home.

When switching from the ﬁ rst layer to the second layer of a dual-layered DVD Video disc, there may be

•

momentary distortion in the image and sound. This is not a malfunction of the unit. Once a DVD-RW/±R recorded in Video Mode is ﬁ nalised, it becomes DVD-Video.

•

❖

Audio CD

•

An audio disc on which 44.1 kHz PCM Audio is recorded. Plays CD-DA format audio CD-R and CD-RW discs.

•

The unit may not be able to play some CD-R or CD-RW discs due to the condition of the recording.

•

CD-R/-RW

❖

Use a 700MB (80 minutes) CD-R/-RW disc. If possible, do not use a 800MB (90 minutes) or above

•

disc, as the disc may not play back. If the CD-R/-RW disc was not recorded as a closed session, you may experience a delay in the early

•

playback time, all recorded ﬁ les may not play. Some CD-R/-RW discs may not be playable with this unit, depending on the device which was used to

•

burn them. For contents recorded on CD-R/-RW media from CDs for your personal use, playability may vary depending on contents and discs.

DVD±R Disc Playback and Recording

❖

Once a DVD±R recorded in Video Mode is ﬁ nalised, it becomes DVD-Video.

•

You can record onto the available space on the disc and perform editing functions such as giving titles

•

to discs and programmes and erasing programmes before ﬁ nalising. When programming is erased from a DVD±R, that space does not become available. Once an area on

•

a DVD±R is recorded on, that area is no longer available for recording, whether the recording is erased or not.

It takes about 30 seconds for the unit to complete recording management information after recording

•

ﬁ nishes. This product optimizes the DVD±R for each recording. Optimizing is carried out when you start

•

recording after inserting the disc or turning on the unit. Recording onto the disc may become impossible if optimizing is carried out too many times.

•

Playback may be impossible in some cases due to the condition of recording. This unit can play back DVD±R discs recorded and ﬁ nalised with a Samsung DVD video recorder. It

•

may not be able to play some DVD±R discs depending on the disc and the condition of the recording.

❖

DVD-RW Disc Playback and Recording

Recording and playback can be performed on DVD-RW discs in both the Video and VR Modes.

•

Once a DVD-RW recorded in both the Video and VR Modes is ﬁ nalised, you cannot perform additional

•

recording. Once a DVD-RW recorded in Video Mode is ﬁ nalised, it becomes DVD-Video.

•

GETTING STARTED

English _5

getting started

•

In both modes, playback can be performed before and after ﬁ nalisation, but additional recording, deleting and editing can not be performed after ﬁ nalisation.

•

If you want to record the disc in VR Mode and then record in V Mode, be sure to execute Format. Be careful when executing Format because all the recorded data may be lost.

•

A DVD-RW blank disc is initialized to VR Mode when ﬁ rst initialized.

DVD+RW Disc Playback and Recording

❖

With DVD+RW discs, there is no difference between DVD-Video format(Video mode) and DVD-Video

•

Recording format(VR mode). Finalising is generally unnecessary when using a DVD+RW disc.

•

❖

DVD-RAM Disc Playback and Recording

Ensure that the recording mode is set to VR mode. Otherwise, this product will not be able to play the

•

recording. You cannot play a DVD-RAM in most DVD components due to compatibility issues.

•

Only DVD-RAM standard Version 2.0. discs can be played in this unit.

•

DVD-RAM recorded on this unit may not work with other DVD components. To determine compatibility with these DVD-RAM discs, refer to the user’s manual for the player.

For cartridge type DVD-RAM discs, remove the cartridge and use the disc only.

•

Disc Copy

Contents Copy Speciﬁ cations

Contents HDD  DVD DVD  HDD

Recorded Video Title Supported Supported

Copy Protected Title Not supported Not supported

Copy Once Title

Once “Copy Once programme” has been recorded on the DVD disc, this title cannot be copied to HDD anymore.

But “Copy Once programme” has been recorded on the HDD, this title can be copied to DVD-RW (VR mode) or DVD-RAM.

Contents Copy Speciﬁ cations

Contents HDD ➔ DVD or USB DVD ➔ HDD or USB USB ➔ HDD or DVD

MP3 Supported Supported Supported

JPEG(photo) Supported Supported Supported

DivX Supported Supported Supported

CD-DA Not supported Supported Not supported

•

Disc(CD-R/CD-DA/CD-RW/DVD-RAM, DVD±R(Finalise)/DVD+RW/DVD-RW(Finalise)) ➔ HDD or USB

•

HDD ➔ DVD-R, DVD-RW(V) or USB

•

USB ➔ HDD or DVD-R, DVD-RW(V)

•

PTP USB is not available when you copy to USB.

•

If the disc is ﬁ nalised through Disc Manager, it can be compatible with PC as a disc with a UDF ﬁ le system.

(Deletes the Title in the HDD after

Move

Not supported

copying)

6_ getting started

COPY PROTECTION

Many DVD discs are encoded with copy protection. Because of this, you should only connect your HDD & DVD RECORDER

•

directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs. This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and

•

other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorised by Macrovision Corporation, is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Protection

This HDD & DVD RECORDER can allow you to protect the contents of your discs, as described below.

•

Programme-protected: See page 82 “Locking (Protecting) a Title”

•

Disc-protected: See page 96 “Disc Protection”

❋

DVD-RAM/±RW/±R discs that are incompatible with the DVD-VIDEO format cannot be played with this product.

❋

For more information on DVD recording compatibility, consult your DVD-RAM/±RW/±R manufacturer.

❋

Use of poor quality DVD-RAM/±RW/±R discs may cause following unexpected problems including, without limitation, recording failure, loss of recorded or edited materials or damage to the HDD & DVD RECORDER.

Disc Format

Using MP3 disc

❖

CD-R/-RW, DVD-RAM/±RW/±R, HDD, USB with MP3 ﬁ les recorded with UDF, ISO9660 or JOLIET

•

format can be playbacked. Only MP3 ﬁ les with the “.mp3” or “.MP3” extension can be played.

•

For MP3 ﬁ les recorded with a VBR(Variable Bit Rates), from 32 Kbps to 320 Kbps, the sound may cut in

•

and out. Playable bit-rate range is from 56 Kbps to 320 Kbps.

•

Each folder can have up to 500 items including ﬁ les and sub folders.

•

Using JPEG disc

❖

CD-R/-RW, DVD-RAM/±RW/±R, HDD, USB recorded with UDF, ISO9660 or JOLIET format can be

•

playbacked. Only JPEG ﬁ les with the “.jpg” or “.JPG” extension can be displayed.

•

Each folder can have up to 500 items including ﬁ les and sub folders. MOTION JPEG and progressive JPEG are not supported.

•

Using DivX disc

❖

Disc : CD-R/-RW, DVD-RAM/±RW/±R, HDD, USB

•

Video File with following extensions can be played. : .avi, .divx, .AVI, .DIVX

•

DivX Video (Codec) Format : DivX 3.11 DivX 4.x

•

DivX 5.x (without QPEL and GMC) DivX Audio (Codec) Format : MP3, MPEG1 Audio Layer 2, LPCM, AC3, DTS

•

Supported subtitle ﬁ le formats: .smi, .srt, .sub, .psb, .txt, .ass

•

Each folder can have up to 500 items including ﬁ les and sub folders.

•

You cannot play back the disc that is larger than a 720 x 576 pixel resolution.

•

GETTING STARTED

English _7

getting started

Do not use the following discs!

•

LD, CD-G, CD-I, CD-ROM and DVD-ROM discs should not be used in this product. [Note]

Disc types that can be played : CD/CD-R/-RW/MP3/JPEG/DVD-Video/DVD-RAM/±RW/±R. For a DVD-RW/±R disc, which has been recorded in Video Mode on another component, it can play only when ﬁ nalised.

•

Some commercial discs and DVD discs purchased outside your region may not be playable with this product. When these discs are played, either “No disc.” or “Please check the regional code of the disc.” will be displayed.

•

If your DVD-RAM/±RW/±R discs is an illegal copy or is not in DVD video format, it may also not be playable.

Disc compatibility

❖

Not all brands of discs will be compatible with this unit.

•

Compatible USB Devices at host port

❖

The USB host port acts as the one of desktop or laptop computer.

•

This product is compatible with mass storage devices(removable storage devices) and PTP devices

❋

(such as digital still cameras)

•

The USB host port provides USB2.0 connectivity and also backward compatibility with USB1.1 (USB1.0) devices.

•

Supported devices at host port

❋

Mass Storage Devices

- Digital Still Camera

- MP3 Player

- Memory stick

- Card Reader (One or Multi-slot Card Reader)

- External Hard disk drive : Only supports FAT32 formatted HDD.

- Others removable storage devices.

❋

PTP ( Picture Transfer Protocol ) devices

- Digital Still Camera (in PTP mode among USB connection modes)

•

This product only supports FAT16/32 ﬁ le system

•

This product supports up to maximum 4 partitions

•

Notice (Caution)

❋

If you happen to use a bad quality USB cable, the USB device might not be recognized.

❋

The compatibility with MP3 players is somewhat restricted.

- This product can playback only mp3 format contents.

- This product does not support the audio contents encrypted by DRM (Digital Right Management)

❋

Either USB hub device or hub extension connectivity is not supported. There are lots of different kinds of USB devices.

❋

Some of the USB devices mentioned above might not be compatible with this product. In other words, the USB host function of this product does not guarantee the compatibility with all of USB devices.

8_ getting started

TPL ( Target Peripheral List )

•

Since this product is not a Windows XP but a embedded USB host system, naturally the supported USB devices cannot help being limited. The USB host functionality and compatibility of this product have been proved with following items. (Except these items , we expect lots of other USB devices will work well with this product )

DSC (Digital Still Camera)

❋

Vendor Brand

Samsung VP-MS11, S800, Pro815, V20, V10, D60, UCA5

Sony DSC-W50, DSC-R1, DSC-P200, DSC-P150

Olympus C-70 zoom, SP-700, FE5500, C-470Z

Nikon Coolpix 7900, Coolpix-p3, Coolpix S2

Panasonic DMC-FX01, DMC-LX1S, DMC-FZ5

Canon IXUS 60, IXUS 600, PowerShot A700, IXUS 700, A620, S80

Fuji Finepix-F700

MP3

❋

Vendor Brand

i-river N11, T30, T10, Mplayer

Samsung YP-T8, YP-U2, YP-T9, YP-P2

❋

Others

Product Vendor Brand

PMP COWON A2

External HDD DATAgram DHC-350

Card Reader Unicon UC-601R

GETTING STARTED



Among MP3 players in the list above, those that do not use Mass Storage Class are not supported.

English _9

contents

GETTING STARTED

CONNECTING & SETTING UP

SYSTEM SETUP

2 Warning 3 Precaution 12 General Features 13 Before reading the user’s manual 14 How to use the HDD & DVD RECORDER 16 Unpacking 18 Description 21 Tour of the Remote Control

22 Connecting the HDD & DVD RECORDER 23 Additional connections 24 Antenna + HDD & DVD RECORDER +

External decoder box + TV

Other type of connecting the Video output cable

Other type of connecting the Audio output cable

30 Connecting HDMI/DVI to a TV 32 Connecting to AV 3 IN, DV input jack 33 Connecting to USB Devices

34 On-Screen Menu Navigation 34 Plug & Play Setup 36 Setting the Clock 36 Channel Set 38 Setting up the Language Options 38 Setting up the System Options 41 Setting up the Audio Options 42 Setting up the Video Options 46 Setting up the Parental Lock 47 Setting up the Recording Options

10_ contents

PLAYBACK

49 Region code (DVD-Video only) 49 Logos of Discs that can be played 49 Disc types that can be played 51 Playing a Disc 52 Using the Disc Menu & Title Menu 52 Using the playback related buttons 54 Using the INFO button 54 Selecting the Subtitle Language 55

Selecting the Soundtracks & Audio Channels

55 Changing the Camera Angle 55 Repeat Play 56 Zooming-In 57 Using Markers 58 Using the Bookmarks 59 Playing an Audio CD/MP3 64 Viewing a Picture 66 Playing a DivX

RECORDING

68 Recordable Discs 69 Recording Formats 70 Recording Mode 71 Unrecordable pictures 72 Recording immediately 73 Copying from a Camcorder 74 Making a One Touch Recording (OTR) 75 Simultaneous Recording and Playback 76 Time Shift function as a live signal 77 Making a Timer Recording 79 Go To Recorded List

CONTENTS

EDITING

REFERENCE

100

APPENDIX

102

81 Basic Editing (Title List) 85 Using the Sort function (Title List) 86 Navigation Menu 87 Select Contents 87 Advanced Editing (Playlist) 92 Copying from HDD to DVD or VICE-VERSA 93 Copying MP3, JPEG or DivX 95 Changing the name of Music/Photo/DivX ﬁ le 96 Disc Manager

100 Troubleshooting

102 Speciﬁ cations

English _11

getting started

GENERAL FEATURES

This unit allows you to record and playback high quality digital video on DVD-RAM/±RW/±R discs or on the HDD. You can also edit digital images on DVD-RAM/±RW discs or HDD.

HDD Recording

DVD-HR773

•

You can record up to Approx. 264 hours of video (in EP mode (8 Hours)) on the internal 160GB (gigabyte) hard disk (HDD).

•

DVD-HR775 You can record up to Approx. 421 hours of video (in EP mode (8 Hours)) on the internal 250GB (gigabyte) hard

disk (HDD). DVD-HR777

•

You can record up to Approx. 534 hours of video (in EP mode (8 Hours)) on the internal 320GB (gigabyte) hard disk (HDD).

With both recordable DVD and a high-capacity HDD in the same recorder, you have the ﬂ exibility to keep recordings on the HDD for quick access anytime, or record to DVD for archiving or playing on other DVD players.

Copy between HDD and DVD

You can copy recordings from the HDD to recordable DVD, or from DVD to the HDD. You can only copy in the same record mode as the source title.

Simultaneous Recording and Playback

Playback and recording for both the DVD and the built-in hard disk drive (HDD) are completely independent. For example you can record a broadcast programme to either a recordable DVD or the HDD, while watching another recording you already made on the same DVD or on the HDD.

Automated Quality Adjustment for Timer Recording

If FR mode is selected, the video quality is adjusted automatically so that all video for the scheduled time can be recorded onto the free disc space. (See page 77)

Copying data from a digital camcorder using a DV input jack

Record DV Device video onto HDD and DVD-RAM/ ±RW/±R discs using the DV input jack (IEEE 1394-4pin/4pin). (See page 73)

High quality progressive scan

Progressive scanning provides high resolution and ﬂ icker free video. The 10-bit 54-MHz DAC and 2D Y/C Separating Circuitry provides the highest image playback and recording quality. (See page 44)

DivX Certiﬁ cation

DivX

is a digital video format created by DivX, Inc. This is an ofﬁ cial DivX Certiﬁ ed or DivX Ultra

Certiﬁ ed device that plays DivX video.

HDMI (High Deﬁ nition Multimedia Interface)

HDMI reduces picture noise by allowing a pure digital video/audio signal path from the HDD & DVD RECORDER to your TV. This HDD & DVD RECORDER supports 576P, 720P, 1080i and 1080P.

Anynet+(HDMI CEC)

Anynet+ is a function that can be used to operate the recorder using a Samsung TV remote control, by connecting the HDD & DVD RECORDER to a SAMSUNG TV using an HDMI Cable. (This is only available with SAMSUNG TVs that support Anynet+.)

EZ Record Mode

This function allows you Initialise and Finalise a disc automatically. (See page 48)

USB Interface for Data Transfer

You can transfer JPEG, MP3 and DivX ﬁ le of the MP3 player, USB memory or digital camera to a HDD & DVD RECORDER using the USB interface. You can also copy JPEG, MP3 and DivX ﬁ le of the HDD &DVD RECORDER to MP3 player, USB memory or digital camera using the USB interface.

12_ getting started

BEFORE READING THE USER’S MANUAL

Make sure to check the following terms before reading the user manual.

Icons that will be used in manual

Icon Term Deﬁ nition

S Z X

C V

K L

o G A D J M

N F

HDD This involves a function available on the HDD.

DVD

RAM This involves a function available on DVD-RAM.

-RW This involves a function available on DVD-RW.

+RW This involves a function available on DVD+RW.

+R This involves a function available on DVD+R.

CD-DA This involves a function available on a data CD (CD-R or CD-RW).

JPEG This involves a function available on CD-R/-RW, DVD±R/±RW/-RAM discs or HDD.

MP3 This involves a function available on CD-R/-RW, DVD±R/±RW/-RAM discs or HDD.

DivX This involves a function available on CD-R/-RW, DVD±R/±RW/-RAM discs or HDD.

Caution This involves a case where a function does not operate or settings may be cancelled.

NOTE This involves tips or instructions on the page that help each function operate.

One-Touch

button

USB This involves a function available on USB.

This involves a function available on DVD or DVD±R/-RW(V) discs that have been ﬁ nalised.

-R This involves a function available on DVD-R.

A function that can be operated by using only one button.

GETTING STARTED

About the use of this user’s manual

Be sure to be familiar with Safety Instructions before using this product. (See pages 2~9)

1) If a problem occurs, check the Troubleshooting. (See pages 100~101)

English _13

getting started

HOW TO USE THE HDD & DVD RECORDER

Step 1: Select the disc type or HDD

Please check available disc type before recording.

If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a rewritable DVD±RW or DVD-RAM type disc. If you want to save a recording without any changes, choose a non-rewritable DVD±R. You can record ﬁ les directly to the built-in HDD or edit a recorded ﬁ le.

Step 2: Format the disc to start recording

Unlike a VCR, the HDD & DVD RECORDER automatically starts formatting when an unused disc is inserted. This is required for the preparation of recording on a disc.

Using the HDD

Formatting unnecessary.

Using a DVD-RAM

This type of disc can be formatted in DVD-Video Recording format (VR mode). You can edit recorded images and create a playlist in a speciﬁ c sequence according to your requirements.

Using a DVD-RW

This type of disc can be formatted in either DVD-Video format (V mode) or DVD-Video Recording format (VR mode). For an unused disc, a message that asks whether to initialize a disc or not. If you select “DVD-VR” or “DVD-V”, initialising will be started. You can play a Video mode disc on various DVD components. A VR mode disc allows more varied editing.

Using a DVD-R

Formatting disc is unnecessary and only V Mode Recording is supported. You can play these types of discs on various DVD components only when they have been ﬁ nalised.

Using a DVD+RW

For an unused DVD+RW disc, a message that asks whether to format a disc or not. If you select “DVD+RW”, formatting will be started.

Using a DVD+R

This type of disc will be formatted automatically.

14_ getting started

Step 3 : Recording

There are two different recording methods, Direct Recording and Timer Recording. Timer recording is classiﬁ ed as follows:

Recording mode : XP (high quality mode), SP (standard quality mode), LP (long recording mode), and EP (extended mode) according to the recording mode. When recording is set in the FR mode, the best quality picture is recorded with regards to the remaining time on the disc.

Step 4 : Playing

You can select the title you want to play in a displayed menu and then immediately start playback. A DVD consists of sections, called titles, and sub- sections, called chapters.

Step 5: Editing a recorded disc

Editing on discs is easier than conventional video tapes. The HDD & DVD RECORDER supports many different edit functions, possible only with DVDs and HDD.

With a simple and easy edit menu, you can operate various edit functions, such as delete, copy, rename, lock, etc., on a recorded title.

Creating a playlist (DVD-RAM/-RW in VR mode, HDD)

With this HDD & DVD RECORDER, you can create a new playlist on a disc and edit it without the original, pre-existing recording.

Step 6 : Finalising & Playing on other DVD components

To play your DVD on other DVD components, ﬁ nalising may be necessary. First, ﬁ nish all editing and recording operations, then ﬁ nalise the disc.

When using a DVD-RW disc in VR Mode

DVD discs recorded in VR mode can only be played back in DVD recorders, not players.

When using a DVD-RW disc in Video Mode

The disc should be ﬁ nalised ﬁ rst to enable playback on anything other than this HDD & DVD RECORDER. No more editing or recording can be made on the disc once it has been ﬁ nalised. To enable recording on the disc again, the disc must be unﬁ nalised.

When using a DVD±R disc

You should ﬁ nalise the disc to play it on a component other than this HDD & DVD RECORDER. You cannot edit or record on the disc once it has been ﬁ nalised.

GETTING STARTED

You can ﬁ nalise the disc automatically using EZ Record function. (See page 48)



English _15

getting started

UNPACKING

Accessories

Check for the supplied accessories below.

USB

PAUSE

REPEAT

Video/Audio Cable RF Cable for TV Remote Control

Batteries for Remote Control (AAA Size) Instruction Manual Quick Guide

Preparing the Remote Control

Install Batteries in the Remote Control

Open the battery cover on the back of the remote control.

•

Insert two AAA batteries. Make sure that the polarities (+ and –) are aligned correctly.

•

Replace the battery cover.

•

If the remote does not operate properly:

Check the polarity +/– of the batteries (Dry-Cell)

•

Check if the batteries are drained.

•

Check if remote sensor is blocked by obstacles.

•

Check if there is any ﬂ uorescent lighting nearby.

•

Dispose of batteries according to local environmental regulations. Do not put them in the household trash.

To determine whether your television is compatible, follow the instructions below.

Switch your television on.

Point the remote control towards the television.

Press and hold the TV STANDBY/ON button and enter the two-ﬁ gure code corresponding to the brand of your television, by pressing the appropriate number buttons.

16_ getting started

Controllable TV Codes

BRAND BUTTON

SAMSUNG 01, 02, 03, 04, 05, 06, 07, 08, 09

AIWA 82

ANAM 10, 11, 12, 13, 14, 15, 16, 17, 18

BANG & OLUFSEN 57

BLAUPUNKT 71

BRANDT 73

BRIONVEGA 57

CGE 52

CONTINENTAL EDISON 75

DAEWOO

EMERSON 64

FERGUSON 73

FINLUX 06, 49, 57

FORMENTI 57

FUJITSU 84

GRADIENTE 70

GRUNDIG 49, 52, 71

HITACHI 60, 72, 73, 75

IMPERIAL 52

JVC 61, 79

LG 06, 19, 20, 21, 22, 78

LOEWE 06, 69

LOEWE OPTA 06, 57

MAGNAVOX 40

METZ 57

MITSUBISHI 06, 48, 62, 65

MIVAR 52, 77

NEC 83

NEWSAN 68

19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34

BRAND BUTTON

NOBLEX 66

NOKIA 74

NORDMENDE 72, 73, 75

PANASONIC 53, 54, 74, 75

PHILIPS 06, 55, 56, 57

PHONOLA 06, 56, 57

PIONEER 58, 59, 73, 74 RADIOLA 06, 56

RADIOMARELLI 57

RCA 45, 46 REX 74

SABA 57, 72, 73, 74, 75

SALORA 74

SANYO 41, 42, 43, 44, 48

SCHNEIDER 06

SELECO 74

SHARP 36, 37, 38, 39, 48

SIEMENS 71

SINGER 57

SINUDYNE 57

SONY 35, 48

TELEAVA 73

TELEFUNKEN 67, 73, 75, 76

THOMSON 72, 73, 75

THOMSON ASIA 80, 81

TOSHIBA 47, 48, 49, 50, 51, 52

WEGA 57 YOKO 06

ZENITH 63

Result: If your television is compatible with the remote control, it will switch off.

It is now programmed to operate with the remote control.

GETTING STARTED



If several codes are indicated for your television brand, try each one in turn until you ﬁ nd one that works.



If you replace the remote control’s batteries, you must set the brand code again.

Then you can control the television using the following buttons after pressing the TV button.

Button Function

TV STANDBY/ON Used to switch the television on and off. INPUT SEL. Used to select an external source. TV VOL (+ / –) Used to adjust the volume of the television. PROG (, / .) Used to select the desired channel. TV MUTE Used to toggle the sound on and off. Number Used to input number directly.



The functions listed above does not necessarily work on all televisions. If you encounter problems, operate the

television directly.

English _17

getting started

DESCRIPTION

Front Panel

1 2 3

OPEN/CLOSE button

DISPLAY

PLAY/PAUSE button

SEARCH/SKIP buttons

STOP button

REC button

HDD/DVD button

DISC TRAY

USB HOST

DV-INPUT

AV 3 INPUT

STANDBY/ON button

101112

Opens and closes the disc tray.

Displays the playing status, time, etc.

Plays a disc or pauses playback.

Goes to the next title/chapter/track or goes back to the previous title/chapter/track. (Playback mode)

Select TV preset Channels. (Stop mode)

Stops disc playback.

Starts recording.

Selects HDD/DVD mode.

Opens to accept a disc.

Connects to digital still camera, MP3 player, memory stick, Card reader, external HDD or other removable storage devices

Connects to external digital equipment with a DV jack. (such as a camcorder)

Connects to external equipment.

Turns the HDD & DVD Recorder on and off .

7 6 5 4

18_ getting started

Rear Panel

In from aerial

connector

VIDEO OUT

AV2(EXT) INPUT

SCART connector DIGITAL AUDIO

OUT(COAXIAL)

HDMI OUT

DIGITAL AUDIO

OUT(OPTICAL) AV1(TV) OUTPUT

SCART connector

AUDIO OUT

COMPONENT VIDEO

OUT

Out to TV

connector

9 8 7 6 5

Connects RF cable from antenna.Connects RF cable from antenna.

Connects the input of external equipment using a Video cable.

Connects to equipment having SCART output jack.

Connects to an ampliﬁ er having a digital coaxial audio input jack.

Connects to equipment having HDMI input.

Connects to an ampliﬁ er having a digital optical audio input jack.

Connects to equipment having SCART input jack.

Connects to the audio input of external equipment using audio cables.

Connects to equipment having Component video input.

Connects RF cable to TV antenna input.

GETTING STARTED

Fan

The fan always revolves when the power is on. Ensure a minimum of 10 cm clear space on all sides of the fan when installing the product.

English _19

getting started

Front Panel Display

Playback-related, Open/Close indicator

In Disc Indicator

DVD VIEW Indicator

HDD VIEW Indicator

USB VIEW Indicator

Disc Media Indicator

TIMER Indicator

HDMI Indicator

REC Indicator

STATUS Indicator

Lights when playback-related and open/close buttons are selected.

Lights status icon.

Lights when DVD mode is selected.

Lights when HDD mode is selected.

Lights when USB mode is selected.

Lights when a DVD±RW/±R disc is loaded.

Lights to indicate the timer record mode.

Lights to indicate when HDMI is connected.

Lights in the record mode.

Playing time/clock/current status indicator.

20_ getting started

TOUR OF THE REMOTE CONTROL

Your HDD & DVD RECORDER remote control will work with Samsung televisions and compatible brands.

Installing batteries in the Remote Control

Lift the cover at the back of the remote

1. control upward as shown.

Install two AAA size batteries.

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

Replace the cover.

Assuming typical TV usage, the batteries last for about one year.

GETTING STARTED

TV button

Press this to operate TV.

Press to turn the HDD & DVD RECORDER

Press TV/DVD button to select the Video input on

Press this to switch the DVD’s subtitle language.

Forward/Rewind, Search, Skip, Stop

Brings up the HDD & DVD RECORDER’s setup

This will display current setting or disc status.

Use this to enter the View Recording list/disc

Allows access to common function of HDD &

Press this when you copy DVD to HDD and vice-

You can also copy ﬁ les from HDD or DVD to the

Use to make a recording on HDD/DVD-RAM/

Use this to bookmark a position while playing a disc.

STANDBY/ON button

On/Off.

NUMBER buttons

Used to input number directly.

TV/DVD button

your TV.

SUBTITLE button

Playback-related Buttons

, Play/Still.

TV VOL button

TV volume adjustment.

MENU button

menu.

INFO button

TITLE LIST/DISC MENU button

menu.

A, B, C, D button

DVD RECORDER.

COPY button

versa.

USB storage devices and vice-versa.

REC button

±RW/±R discs.

MARKER button

PAUSE

REPEAT

USB

SELECT

(DVD, HDD, USB)

OPEN/CLOSE button

To open and close the disc tray.

TV STANDBY/ON button

Press to turn the TV On/Off.

INPUT SEL. button

Select input signal in external input mode (PROG, AV1, AV2, AV3 or DV input)

TV MUTE/AUDIO button

In TV mode, this operates as sound mute. Use this to access various audio functions on a disc. (DVD mode)

PROG button

Use this to select a TV programme.

RETURN button

Press to return to the previous menu.

OK/DIRECTION buttons (▲▼◄► buttons)

Used to select or move up/down, left/ right when setting the menu function.

EXIT button

Press to exit the setup screen.

PLAY LIST/TITLE MENU button

Use this to return to the Title menu, or to view the recorded ﬁ les list.

REC MODE button

Use this to set the desired Recording time and picture quality. (XP/SP/LP/EP).

REC PAUSE/TIME SHIFT button

Use this to pause during recording. In HDD mode, use this to operate Time shift function.

TIMER/REPEAT button

Press to directly enter the Timer Recording Mode menu. Allows you to repeat a title, chapter, track or disc.

English _21

connecting & setting up

CONNECTING THE HDD & DVD RECORDER

This section involves various methods of connecting the HDD & DVD RECORDER to other external components and required initial setting modes.

You can connect your HDD & DVD RECORDER to the television using the SCART cable if the appropriate input is available on the television.

Connect the RF cable as shown.

Connect one end of the SCART cable to the AV1 socket on the rear of the HDD & DVD RECORDER.

Plug the other end into the appropriate connector on the television.

Plug in the HDD & DVD RECORDER and TV

Turn on the HDD & DVD RECORDER and TV.

Press the INPUT SEL. button on your TV remote control until the Video signal from the HDD & DVD RECORDER appears on the TV screen.

To ANT IN

To TV

RF Cable

The RF cable connection of this product sends only signals of TV. You must connect SCART cable or Audio/Video



cables to watch a DVD from your HDD & DVD RECORDER. TV mode : Press the TV/DVD button on the remote control, then “TV”



HDD & DVD RECORDER). Then you can watch programmes received through TV.

If you set “Power save mode” on and power off Recorder, TV channel signal from ANT OUT of DVD-Recorder may be



a little noisy. So, in this case, set “Power save mode” off, then you see the clean channel in TV.

22_ connecting & setting up

To ANT INPUT

will

appear on the Front display (or turn off

ADDITIONAL CONNECTIONS

You can connect your HDD & DVD RECORDER to a satellite or digital tuner.

CONNECTING & SETTING UP

External device (VCR/Satellite receiver)

- DVD mode

Connect the AV2 connector of HDD & DVD RECORDER and VCR/Satellite receiver or digital tuner using a SCART cable.

Connect the AV1 connector to the SCART AV connector on TV.

Turn on the HDD & DVD RECORDER, VCR/Satellite receiver or digital tuner and TV.

Set Input mode on AV2.

- TV mode

Press the TV/DVD button on the remote control, then “TV” will appear on Front display. (or turn off HDD & DVD RECORDER.)

You can watch programmes from a satellite or digital tuner connected to this HDD & DVD RECORDER, even when the HDD & DVD RECORDER is turned off. You can not use this connection when setting “power save mode” on.

English _23

connecting & setting up

ANTENNA + HDD & DVD RECORDER + EXTERNAL DECODER BOX + TV

If you connect external decoder box to HDD & DVD RECORDER, you can record scrambled channels (CANAL+ or Premiere broadcasts) received through the built-in TV tuner in HDD & DVD RECORDER.

Wall

DECODER

Connect RF antenna cables as shown.

1. Connect the AV1 connector on this recorder to the SCART AV connector on TV using a SCART cable.

2. Connect the AV2 connector to a SCART AV connector on decoder box.

3. To watch or record PAY-TV Canal Plus programmes, set your HDD & DVD RECORDER to receive the

4. channels using the on-screen display. (Refer to pages 36~37)

24_ connecting & setting up

OTHER TYPE OF CONNECTING THE VIDEO OUTPUT CABLE

There are several ways to output a video signal not using scart cables. Select one of the following video connections that best suits.

•

Case 1 : Connecting to a Video (Composite) output jack

•

Case 2 : Component Video output jacks

Component video and Progressive Output Modes

•

Component video output is available only if your TV supports Component video input, respectively. If Component video output does not work, check the TV connections and the TV input selection settings.

•

Compared to standard interlaced video, progressive scan doubles the amount of video lines fed to your TV, resulting in a more stable, ﬂ icker-free, clear image than interlaced video. This is only available with TVs that support progressive scan.

•

Progressive Scan Output (576P) Consumers should note that not all high deﬁ nition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture, in case of 576 progressive scan picture problems, It is recommended that the user switch the connection to the ‘standard deﬁ nition’ output. If there are questions regarding our TV set compatibility with this model 576P HDD & DVD RECORDER, please contact our customer service centre.

Case 1 : Connecting to a Video (Composite) output jack

Connect a video (Yellow) cable between the VIDEO (yellow) OUT jack on HDD & DVD RECORDER and VIDEO (yellow) INPUT jack on your TV (or AV ampliﬁ er).

•