Samsung DVD-711 User Manual

ELECTRONICS
V I D E O
DVD PLAYER
DVD/VIDEO-CD/CD
DVD-711
AH68-00442F
Precautions
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Precautions
This symbol indicates “danger­ous voltage” inside the product that presents a risk of electric shock or personal injury.
This symbol indicates important instructions accompanying the product.
CAUTION:DVD PLAYERS USE AN INVISIBLE LASER BEAM WHICH CAN
CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE PLAYER CORRECTLY AS INSTRUCTED.
CAUTIONS
Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Attention: Pour éviter les chocs électriques, introduíre la lame la plus large de la fiche dans
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment.To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.
la borne correspondante de la prise et pousser jusqu au fond.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.These limits are designed to provide reason­able protection against harmful interference in a residential installation.This equipment gen­erates, uses and can radiate radio frequency energy and, if not installed and used in accor­dance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. This class B digital apparatus meets all requirements of the Canadian Interference -­Causing Equipment Regulations.
CLASS 1 LASER PRODUCT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT
WARNING
To reduce the risk of fire or shock hazard, do not expose this DVD player to rain or moisture.
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVIC­ING TO QUALIFIED PERSONNEL.
Note:
• This unit can be used only where the power supply is AC 120V, 60Hz.It cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not correspond to the Region number of this DVD player, the DVD player cannot play the disc.
• This device is protected by U.S. patent numbers 4,631,603, 4,577,216 and 4,819,098 and other intellectual property rights. The use of Macrovision’s copy protection tech­nology in the device must be authorized by Macrovision and is intended for home and other limited pay-per-view uses only, unless otherwise authorized in writing by Macrovision. Reverse engineering or disassembly is prohibited.
Handling Cautions
• Before connecting other components to this player, be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electricity can affect normal operation of this player. If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the play­er for long periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
Disc Storage
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
2
3
Before You Start
T
Accessories
Remote Control
S-Video Cable
Install Batteries in the
Remote
Open the battery cover
1
on the back of the remote.
Insert two AA batteries.
2
Make sure that the polarities (+ and -) are aligned correctly.
Replace the battery
3
cover.
Batteries for Remote Control (AA Size)
User’s Manual
• Check the polarity + - of the
• Check if the batteries are
• Check if remote sensor is
• Check if there is any fluo-
Video/Audio Cable
If remote doesn’t operate
properly:
batteries (Dry-Cell)
drained.
blocked by obstacles.
rescent lighting nearby.
General Features Disc Type and Characteristics Description
• Front Panel Controls
Choosing a Connection
• Connection to an Audio System
Playing a Disc Using the Search & Skip Functions Using the Display Function
Using the Disc View Function Selecting the Audio Language Selecting the Subtitle Language
Using the Setup Menu Setting Up the Language Features Setting Up the Parental Control
Controlling a TV with the Remote Troubleshooting Guide
.....................................
...............................................
.........................................
.................
.....
........................
..................
.....................
...............
..............
.........................
.........................
........
............
..........16
...........
........
............
...........
6
• Front Panel Display
7
• Rear Panel
8
Tour of the Remote Control
8
12
• Connection to a TV
13
Repeat Play
14
Program Play & Random Play
17
Changing the Camera Angle
20
Using the Bookmark Function
21
Using the Zoom and 3D Sound Functions
22
Setting Up the Audio Options
26
Setting Up the Display Options
27 29
32
Specifications Warranty
33
..............................................
.............................................
.............................................
...............................
...............................
.....................................
.......
............
...
.................
.................
...............
................
..............
...
8 9
10
13
18 19
23 24 25
30 31
34
35
SETUP
CONNEC-
TIONS
FUNCTIONS
BASIC
FUNCTIONS
ADVANCED
SETUP MENU
CHANGING
REFERENCE
4
5
General Features
PHONES LEVEL
MIN MAX
PLAY/PAUSE
OPEN/CLOSE
SKIPSTOP
STANDBY/ON
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding logos:
Excellent Sound
Dolby Digital, a technology devel­oped by Dolby Laboratories pro­vides crystal clear sound reproduc­tion.
Screen
Video with MPEG-2 compression technology. Both regular and widescreen(16:9) pictures can be viewed.
Slow Motion
An important scene can be viewed in slow motion.
Programmed Play
You can program tracks to play in desired order.
Parental Control
The parental control allows users to set the level necessary to prohibit children from viewing harmful movies such as those with violence, adult subject matter, etc.
Various On-Screen Menu Functions
You can select various languages(Audio/Subtitle) and screen angles while enjoying movies.
Repeat
You can repeat a song or movie simply by pressing the REPEAT button.
DVD-711
Disc Types
(Logos)
DVD
VIDEO-CD
AUDIO-CD
* DO NOT play CD-ROM, CD-I, and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
Recording
Types
Audio
+
Video
Audio
+
Video
Audio
Disc Size
5"
31/2"
5"
31/2"
5"
31/2"
Max.
Playing
Time
Single-sided
240 min.
Double-sided
480 min.
Single-sided
80 min.
Double-sided
160 min.
74 min.
20 min.
74 min.
20 min.
Disc Markings
Characteristics
• DVD contains excellent sound and video due to Dolby Digital and MPEG-2 system.
• Various screen and audio functions can be easily selected through the on­screen menu.
• Video with CD sound, VHS quality & MPEG-1 compression technology.
• An LP is recorded as an analog signal with more distortion. CD is recorded as a Digital Signal with better audio quality, less distortion and less deteri­oration of audio quality over time.
SETUP
COPY PROTECTION
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited view­ing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineer­ing or disassembly is prohibited.
6
~
• Playback Region Number
NTSC
• NTSC broad­cast system in U.S.A, Canada, Korea, Japan, etc.
• Dolby Digital disc
STEREO
• Stereo disc
DIGITAL
SOUND
• Digital Audio disc
• DTS disc
Playback Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
7
Description-Front Panel
PHONES LEVEL
MIN MAX
PLAY/PAUSE
OPEN/CLOSE
SKIPSTOP
STANDBY/ON
D
Front Panel Controls
STANDBY / ON
• When the unit is first plugged in, the indicator lights.When STANDBY/ON is pressed on again, the light goes out and the player is turned on.
DISC TRA Y
• Press OPEN/CLOSE to open and close the disc tray.
DISPLAY
• Operation indicators are displayed here.
Front Panel Display
Angle indicator. You can select multiple angles of a scene recorded by different cameras. Disc type indicators Reverse playback / Pause / Forward playback Lights when 3D surround is turned on. DVD :Title number DVD :Chapter number. Video/Audio CD :Track number Repeat play mode Linear PCM audio output
8
OPEN/CLOSE
• Press to open and close the disc tray.
PLAY/PAUSE
• Begin or pause disc play.
STOP
• Stops disc play.
SKIP
• Use to skip a scene or music.
Dolby Digital Disc DTS (Digital Theater System) output MPEG-2 Audio output Displays various messages concerning opera­tions such as PLAY, STOP, LOAD, RANDOM, ...
no DISC : No disc loaded. OPEN : The disc tray is open. LOAD : Player is loading disc information.
Rear Panel
DIGITAL AUDIO OUT JACK
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital decoder or DTS decoder.
AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
VIDEO OUT JACK
• Use a video cable to connect to the Video input jack on your television.
S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your tele­vision for a higher quality picture.The S-Video must be selected in the VIDEO OUT SELECT.
Description-Rear Panel
S-VIDEO
VIDEO OUT
SELECT
Y,Pb,Pr
COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video. Along with S-Video, Component Video provides the best picture quality. The Y, Pb, Pr must be selected in the VIDEO OUT SELECT.
VIDEO OUT SELECT SWITCH
• Use the switch to set video out.
• If Y, Pb or Pr is selected, S-Video may not work.
• If S-Video is selected, Y, Pb or Pr may not work.
SETUP
9
Tour of the Remote Control
Tour of the Remote Control
DVD Function Buttons
DVD POWER Button NUMBER Buttons OPEN/CLOSE Button SETUP Button
• Brings up the DVD player’s Setup menu.
ZOOM Button SEARCH Buttons
• Allows you to search forward/backward through a disc.
STOP Button STEP Button
• Advances playback one frame at a time.
RETURN Button
• Returns to a previous menu.
TOP MENU Button
• Accesses a music or video display
directly.
AUDIO Button
• Use this button to access various audio functions on a disc.
REPEAT Button
• Allows you to repeat play a title, chapter, track, or disc.
VOLUME CON. Button
• To control the master volume of the player.
3D SOUND Button
BOOKMARK Button PLAY/PAUSE Button
• Begin/Pause disc play.
SKIP Buttons
• Use to skip the title, chapter, or track.
CLEAR Button
• Use to remove menus or status displays from the screen.
MODE Button
• Allows you to program a specific order.
DISPLAY Button
• Displays the current disc mode.
MENU Button
• Brings up the Disc menu.
ENTER/DIRECTION Button (UP/DOWN or LEFT/RIGHT Button)
• This button functions as a toggle switch.
ANGLE Button
• Use to access various camera angles on a DVD.
SUBTITLE Button A-B REPEAT Button
• Use to mark a segment to repeat between A and B.
SETUP
10
TV Function Buttons
CHANNEL UP/DOWN Buttons TV POWER Button
• Use to set the remote to control a compatible TV.
TV/VIDEO Selection Button VOLUME UP/DOWN Buttons
11
Loading...
+ 13 hidden pages