Samsung DMR78AHS/XAA-00, DMR78AHW/XAA-00, DMR77LHS/XAA-00, DMR77LHW/XAA-00, DMR57LFW/XAA-00 Installation Guide

for use by qualified installers,

!f yOUaie ha2ing prob!ems instai!ing this dishWashe,
Please ca!l : 1_800,SAMSUNG (726,7864)
for assistance : www.samsung.com

the possibilities

Thank you for purchasing this Samsung
product. To recewe more complete service.

please register your product at

www.samsung.com/global/register

Throughout this manual, you'll see Warning and Caution notes, These warnings,
cautions, and the important sCety instructions that follow do not cover all

possible conditions and situations that may occur, It's your responsibility to use

common sense, caution, and care when installing, maintaining, and operating the
dishwasher, Samsung is not liable for damages resulting from improper use,

IMPORTANT SAFETY INSTRUCTIONS

What the icons and signs in this installation guide mean:

Hazards or unsafe practices that may result in severe personal injury or

WARNING death.

//_ Hazards or unsafe practices that may result in personal injury or property

CAUTION damage.

//_ To reduce the risk of fire, explosion, electric shock, or personal injury when

CAUTION using the dishwasher, follow these basic safety precautions:

[] Follow directions explicitly.

] Make sure the machine is grounded to prevent electric shock.

[] Call the service center for help.

These warning signs are here to prevent injury to you and others.
Please follow them explicitly.

After reading this section, keep it in a safe place for future reference.

Read all instructions before using the appliance.
Install and store the dishwasher inside, away from exposure to weather.

/_Do not install the dishwasher near electrical components. Keep the dishwasher away from

oAuT,o,open flames.

Do NOT install the dishwasher on a carpet as this is a fire hazard.
Do NOT install the dishwasher in a location where the water may freeze (where the

temperature falls below 32 °F (0 °C)).Frozen water inthe hoses or pipes may damage the
dishwasher.

As with all any equipment using electricity, water and moving parts, potential hazards exist.
To safely operate this appliance, become familiar with its operation and exercise care when

using it.

The dishwasher must be properly grounded. Never connect itto an ungrounded outlet.

@

Prior to removal of original dishwasher and the installation of your new unit, make sure to
switch off your circuit breaker. Do not connect the dishwasher until you have completed the
installation. Connecting the power cable is the last step when installing the dishwasher.

All wiring and grounding must be done inaccordance with the electrical code applicable to

the region.

2 safety instructions

GROUNDING INSTRUCTIONS

For a permanently connected appliance:
This appliance must be connected to grounded metal, a permanent wiring system, or an
equipment-grounding conductor must be run with the circuit conductors and connected to
the equipment-grounding terminal or lead on the appliance.

The dishwasher is very heavy. Do not attempt to move or carry a dishwasher alone. Two or
more people are needed to move a dishwasher and avoid potential injuries.

Ifthe power cable is damaged, it must be replaced by the manufacturer, a service agent or

CAUTION

similarly qualified person inorder to avoid a hazard.
Do not touch the power cable with wet hands.

CAUTION

/3,,

Do not connect another appliance to the same power outlet as the dishwasher.

CAUTION

Make sure to use a new water supply line. Old lines are susceptible to breakage because
they become hardened and may cause property damage due to a water leakage.

Ifthe temperature of the water supplied to the dishwasher is higher than 149 °F(65 °C),
control the heater so that it drops below 149 °F(65 °C). If it does not drop below 149 °F
(65 °C),connect the water supply line to a cold water supply.

Ensure that the water supplied to the dishwasher does not freeze. Frozen water can
damage the hoses, valves, pump, or other components.

Certified residential dishwashers are not intended for licensed food establishments.
(NSF/ANSI Standard 184 for Residential Dishwashers)

For a full list of safety information, please refer to the User Manual.

safety instructions 3

oont nt

PREPARING THE DISHWASHER

ENCLOSURE

INSTALLING THE DISHWASHER

5 Product dimensions
5 Cutout dimensions

6 STEP
8 STEP

9 STEP
10 STEP

11 STEP
12 STEP

13 STEP
14 STEP
15 STEP
17 STEP

18 STEP

1 Checking the parts and tools

2 Selecting the best location for the

dishwasher

3 Water supply requirements
4 Electrical requirements

5 Preparing the dishwasher

6 Placing the dishwasher and

connecting water supply line
7 Leveling the dishwasher
8 Securing the dishwasher

9 Connecting the drain hose

10 Wiring connections
11 Completing the installation

4 contents

SPECIFICATIONS

/

p p rncj

PRODUCT DIMENSIONS

d

Side view
(DMR78 series/

DMR77 series)

Side view
(DMR57 series)

,4

27" (686 mm) _.... _"

20 _/2"(520 mm)

24 _/2"(622 mm)

24 *A" (629 mm)

Rear view
(DMR78 series

DMR77 Series/
DMR57 Series)

i The water supply

and drain hose
line, power cable

should go through
this part.

i

24 _/2' (622 mm)

CUTOUT DIMENSIONS

[_ This dishwasher is designed to be enclosed on

top and on both sides by a standard residential
kitchen unit.

24" (610 mm)

minimum

24" (610 mm)

minimum

preparing the dishwasher enclosure 5

Be sure that you or your installer follow these instructions closely so that the new

dishwasher works properly and that you're not at risk of injury when washing
dishes.

STEP 1 CHECKING THE PARTS AND TOOLS

Before starting on the installation, prepare allthe necessary tools and parts required to install the

dishwasher. This will save installation time and simplify the installation process.

Parts required

Provided

Brackets

Not provided

2 sCreWs

(for the Brackets)

2 screws 2 screws

(for the side walls) (for the kick plate)

%

PowerCable

For the water supply line - Flexible stainless steel braided supply line or Minimum 3/8" O.D.
copper tubing with compression fitting. (Plastic tubing is not recommended)

A 90° elbow with 3/8" N.P.T.external pipe threads on one end, and sized to fit your water

supply line (copper tubing/compression fitting, or braided hose) on the other end.

Twist on wire

Connector

Strain relief

o©

i i i i i

Water supply line 90° Elbow(3!8!!)

Tubefittings

EleCtriCal tape &

Standard duct tape

®

Teflon tape or sealing

compound

Hose Clamp

6 installing the dishwasher

Air gap Rubber Connector