Samsung DMR77LHW/XAA-00, DMR77LHS/XAA-00 Owner’s Manual

the possibilities

ThankycJ for Durchaslngthis Samsung product. TOreceive more complete service.

please register your product at

www.samsung.com/global/register

foaturo¢ of your

F OW

d hwa hor

Your new Samsung Dishwasher will change the way you feel about doing

dishes. From its extra large capacity to its energy efficiency, your new Samsung dishwasher has all the features to make your chores much less mundane,

1. Extra large capacity

The upper rack isslanted for larger dishes. The space has been maximized to accommodate a variety of dish sizes.

2. Elegant design with digital touch sensors

Digital touch sensors are used in the control panel for more simple operation, with a touch of

elegance.

3. Increased convenience

The smart auto cycle determines the level of soil on the dishes and initiates the optimal cycle using this feature saving water, energy and time.

4. Extremely quiet operation

Efficient noise control technology is used for the quietest possible operation. Your new

Samsung dishwasher will be quieter than ever.

5. Self-cleaning filter

Cleaning the filter yourself is a thing of the past! This product keeps food waste internally while operating, then drains it automatically with the water.

This manual contains important information regarding the use and care of your new Samsung dishwasher. Refer to it for descriptions of the control panel, instructions on how to use the

dishwasher, and tips for making the most of its state-of-the-art features and technologies. The cycle chart on page 22 offers an overview of the different cycles and the troubleshooting section on page 23 tells you what to do if something goes wrong.

2 features of your new samsung dishwasher

Throughout this manual, you'll see Warning i!X and Caution i!X notes. These

important safety instructions do not cover all possible situations that might occur. it is your responsibility to use and caution when installing, maintaining, and

operating your dishwasher. Samsung will not be liable for damages resulting from improper use.

IM PORTANT SAFETY INSTRUCTIONS

What the icons and signs in this user manual mean "

//_ Hazards or unsafe practices that may result in severe personal injury or

WARNING

CAUTION damage.

/_ To reduce the risk of fire, explosion, electric shock, or personal injury when

CAUTION using your dishwasher, follow these basic safety precautions:

Q Do NOT attempt.

WARNING - When using the dishwasher, follow basic precautions, including the following:

_Read all instructions before the dishwasher.

As with any equipment using electricity, water and moving parts, potential hazards exist. To safely operate this appliance, familiarize yourself with its operations and exercise care

when using it.

Install and level your dishwasher on an uncarpeted floor that can support its weight.

Your dishwasher must be properly grounded. Never connect it to an ungrounded outlet.

See page 11 for more information on grounding your dishwasher. Connect the ground wire to the green ground connector in the terminal box.

Use the dishwasher only for its intended function.

death.

Hazards or unsafe practices that may result in personal injury or property

Do NOT disassemble.

Do NOT touch.

Follow directions explicity. Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

using

SAVE THESE INSTRUCTIONS

safety informaton 3

Use only detergents or rinse agents recommended for use in a dishwasher, and keep them out of the reach of children.

After unpacking the dishwasher, keep the packaging out of the reach of children. When loading items to be washed:

Locate sharp items so that they are not likely to damage the door seal. Load sharp knives with the handles up to reduce the risk of cut-type injuries.

Do not wash plastic items unless they are marked "dishwasher safe" or the equivalent. For plastic items not so marked, check the manufacturer's recommendations.

(_Do heating during or immediately use.

not touch the element after

Do not operate the dishwasher unless allenclosure panels are properly in place. Do not tamper with the controls. Do not abuse, sit on, or stand on the door, lid, or dish racks of the dishwasher.

Do not push or place pressure on the door when it is open, as this may damage the dishwasher or cause harm.

To reduce the risk of injury, do not allow children to play in or on the dishwasher. To reduce the risk of fire or explosion:

Under certain conditions, hydrogen gas may be produced in a hot water system that

has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the dishwasher turn

on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use

an open flame during this time.

Remove the door to the washing compartment when removing an old dishwasher from service or discarding it.

_ isconnect the power cable (or disconnect the circuit breaker) before servicing your

dishwasher. Do not allow children to play in or on the dishwasher. They may harm themselves or

damage the dishwasher. Do not repair, replace, or service any part of your dishwasher yourself. Disassembly, repairs

and modifications are permitted by authorized service technicians only. Work done by an unauthorized person may void your warranty.

Before disposing of your dishwasher, remove the door of the washing compartment or the door latch so that children or small animals do not get trapped inside.

4 safety information

SAVE THESE INSTRUCTIONS

The dishwasher is extremely heavy. Do not attempt to move or carry the dishwasher by yourself. Two or more people are needed to move a dishwasher and avoid potential injuries.

After the dishwasher is installed, check that the drain hose is properly connected and that there is no leakage from the hose connectors. If the drain hose is loose, it may cause

property damage.

The water supply line issusceptible to breakage. As time goes by, it becomes less flexible.

Check the line periodically. If it is swollen, torn, cut or there is a water leak, replace it immediately.

Do not put gasoline, solvents, or other flammable materials inside the dishwasher. Do not

wash dishes exposed to these materials.

Keep your dishwasher detergent out of the reach of children. Detergent has an adverse

effect on human organs. It contains elements for polishing and is corrosive. Avoid letting the

detergent come into contact with your skin and eyes. Do not install the dishwasher near electrical components. Keep the dishwasher away from

open flames.

Ifthe dishwasher is left unused for an extended period of time, turn off the water supply.

This dishwasher is intended for residential use only.

BEFORE USING YOUR DISHWASHER

WARNING

Tip-Over Hazard

Do not use the dishwasher until it is correctly installed. Do not push down on an open door. Do not place excessive weight on the open door.

Electric Shock Hazard Failure to follow these instructions can result in death, fire, or electric shock:

Electrically ground the dishwasher Connect the ground wire to the green ground connector in the junction box.

Do not use an extension cord.

SAVE THESE INSTRUCTIONS

safety informaton 5

cont nt

SETTING UP YOUR DISHWASHER

USING YOUR DISHWASHER 12 Basic guidelines

CLEANING AND MAINTAINING YOUR

DISHWASHER

CYCLES 22 Cycle chart

7 Unpacking your dishwasher

7 Checking parts 8 Control panel

10 Cycle selector 10 Display 11 Meeting installation requirements

14 Adjusting the angle of the plate supports 15 Adjusting the height of the upper rack 15 Removing the upper rack 16 Loading the lower rack

16 Loading the upper rack 17 Using the cutlery basket 18 Using the dispenser

20 Cleaning the exterior 20 Cleaning the interior

20 Cleaning the nozzles 21 Storing your dishwasher

6 Contents

TROUBLESHOOTING 23 Check these points if your dishwasher...

25 Information codes

APPENDIX

26 Helping the environment 26 Specifications

Be sure to have your installer follow these instructions closely so that your new

dishwasher works properly and that you're not at risk of injury when washing dishes,

UNPACKING YOUR DISHWASHER

Once your new dishwasher has been delivered to you, carefully unpack it and check for any damage. Ifthe dishwasher has been damaged, make note of it on the waybill and keep a copy. Do not install the dishwasher, and contact Samsung Customer Service at the number listed below.

Ifthere is no damage to the product, you can proceed with the installation. If you are going to install it

yourself, make sure to read through the installation guide and follow the directions inside. After unpacking your dishwasher, keep the packaging out of the reach of children to ensure their safety.

CHECKING PARTS

When your dishwasher has been unpacked, make sure you've received all the parts shown below.

Ifyour dishwasher was damaged during shipping, or if you do not have allthe parts, contact Samsung

Customer Service at 1-800-SAMSUNG(726-7864)

Drain hose

Middle noz

Air brake

Base

Door

Upper rack

Lower nozzle

Lower rack

cover

Control panel

Cutlery basket

setting up your dishwasher 7

CONTROL PANEL

DMR77 Series

Displays the remaining wash time, any wash information (Delay start, Sanitize, Half load, Child lock), and error messages (Rinse refill, error).

Ifan error occurs during an operation, an error message is displayed with a

warning sound. Refer to the information codes page. Delay a cycle for up to 24 hours in one-hour increments. The hour displayed

indicates the time at which the wash will be started. The temperature rises to 162 °F (72 °C) in the final rinse cycle for high

temperature sanitization.

Ifyou select the Sanitize option, the "Sanitize" indicator blinks when the water temperature meets the sanitary temperature (over 155 °F(68 °C)),and then illuminates for 10 minutes at the end of the cycle while it sanitizes.

Select this option to wash a small load of dishes. It is recommended that dishes are placed in the upper rack for this feature.

Ifyou select the Half Load option, both water and electricity consumption are reduced.

8 setting up your d shwasher

The Sanitize feature is in accordance with NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not

intended for licensed food establishments. Your dishwasher is NSF Certified. The cycle that is NSF certified is the Heavy Cycle with the

sanitize option selected.

When Half Load is selected, the dishes placed in the lower rack will not be washed. Only the dishes in the upper rack will be washed.

To cancel & drain a cycle currently running, hold down both the Heavy and

Delicate buttons for three (3) seconds.

This option allows you to lock the buttons on the control panel.

Children will not be able to accidently start the dishwasher by pressing the buttons on the control panel when this option is selected. We recommend

activating this feature while cleaning or wiping the control panel.

When a cycle is running, you cannot operate the Power button. You can only operate it when no cycle is running.

Activating/Deactivating - If you want to activate or deactivate this option,

hold down the Rinse and Quick buttons simultaneously for three (3) seconds.

You can select the appropriate wash cycle depending on the soil level of your

dishes. When a cycle is selected, the indicator for that cycle lights up. If you want to cancel the selected cycle, press the selected cycle button again.

When pressed, all indicator lights turn on and off and the most recently

finished cycle light lights up.

When the dishwasher is running and a selected cycle is finished, 'End' is

displayed and the power turns off automatically.

You can select options cycle after selecting an

(Half Load, Sanitize, or Delay Start) before starting a cycle. If you change the

option, the original cycle is reset.

setting up your dishwasher 9

CYCLE SELECTOR

DMR77 Series

.........................

DISPLAY

DMR77 Series

Use this cycle for regular dinner dishes. Use this cycle for hard-to-clean, heavily soiled dishes, pots and pans, and

dishes with heavy oil. Use this cycle for normally soiled dishes or fragile items such as glasses. Use this cycle for pre-cleaned dishes or glasses. No detergent is dispensed

and no dry cycle is initiated. Use this cycle for lightly soiled dishes. Detergent is dispensed but no dry

cycle is initiated.

This cycle detects the level of soil and automatically initiates the optimal cycle after a few minutes of operation.

Top

1. When the door of the dishwasher is open, the top and front displays (PLURAL) are illuminated. When closed, only the front display is illuminated.

2. When Delay Start, Sanitize, Half Load, or Child Lock are selected, the respective indicators are illuminated.

3. When "Rinse Refill" remains illuminated there is no rinse agent in the dispenser and you should refill the rinse aid.

4. If the door is opened while a cycle is in progress, the remaining time will flash.

Front

10 setting up your dishwasher

MEETING iNSTALLATiON REQUIREMENTS

Electrical supply and grounding

To prevent unnecessary risk of fire, electrical shock, or personal injury, allwiring and grounding

must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest Revision and local codes and ordinances. It is the personal responsibility of the appliance owner to provide adequate electrical service for this appliance.

Never use an extension cord.

CAUTION

When preparing for installation, ensure that your power supply offers:

A 120 Volt 60 Hz 15 AMP fuse or circuit breaker An individual branch circuit serving only your dishwasher

Your dishwasher must be grounded. Ifyour dishwasher malfunctions or breaks down, grounding

will reduce the risk of electric shock by providing a path of least resistance for the electric current.

Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.

WARNING

GROUNDING INSTRUCTIONS

For a permanently connected appliance:

This appliance must be connected to a grounded metal, permanent wiring system, or an

equipment-grounding conductor must be run with the circuit conductors and then connected to the equipment-grounding terminal or lead on the appliance.

Water supply

Your dishwasher will fill properly when your water pressure is 20-120 psi (140-830 kPa). Water

pressure less than 20 psi (140 kPa) may cause water supply valve failure, not allowing the water supply valve to shut off completely. Or, it may take the dishwasher longer to fillthan what the

controls allow, resulting in your dishwasher turning off. (A fill-time limit, designed to prevent overflowing/flooding ifan internal line becomes loose, is built into the controls.)

Most plumbing supply stores sell water supply lines of various lengths up to 10 feet (305

cm) long. You can reduce the risk of leaks and water damage by:

,, Making water faucets easily accessible. ,, Turning off faucets when the dishwasher is not in use.

,, Periodically checking for leaks at water supply line fittings.

Z_ Before using your dishwasher for the first time, check all connections at the water supply valve

....... and faucets for leaks.

Flooring

For best performance, your dishwasher must be installed on a solidly constructed floor. Never install your dishwasher on a platform or poorly supported structure.

Your dishwasher must be properly installed in accordance with the Installation Guide before it is used. If you did not receive an Installation Guide with your dishwasher, you can receive one by visiting our website at www.samsung.com.

setting up your dishwasher 11

BASIC GUIDELINES

Open the door and load your dishes (see page 16).

- Place dishes into the upper and lower racks, unless half load is selected.

- Remove any food remains from the dishes before placing them in the rack(s).

- After placing the dishes into the racks, rotate the nozzles by hand to check whether any of the

dishes will interfere with them.

2. Add detergent to the dispenser (page 18).

- Make sure to use only automatic dishwasher detergent.

- Refer to "Using the dispenser" on how to add detergent.

3. Press the Power button.

- When the Power button is pressed, the entire display turns on and off and the most recently

finished cycle light lights up.

- If "Rinse Refill" is illuminated, you should refill the rinse aid to improve the washing and drying

performance.

4. Select a cycle button (see pages 10 and 22).

- Press the appropriate cycle button depending on the soil level of the dishes.

- When a cycle is selected, the cycle light is illuminated. If the cycle button is activated again, the light

turns off and the cycle is canceled.

- On selecting a cycle according to the soil level of the dishes, see "Cycle Selector".

5. Close the door.

- Push the racks back so that they are in place. Close the door.

- When the door is closed, the dishwasher will start the selected cycle after a few seconds.

The door must be firmly closed. If the door is slightly ajar, the selected cycle will not start automatically.

6. When the wash cycle is completed.

- "End" is displayed on the display and a chime is played.

- The power is automatically turned off.

/_ When you want to load more dishes or pause the dishwasher while it is already running, make sure

....... to open the door slowly and carefully as there is a possibility of injury from the hot steam inside the

dishwasher. (Ifthe door is opened while the dishwasher is running, a safety mechanism is activated and stops the

cycle.)

You should use rinse aids for better drying performance. You can further increase the drying

performance by additionally selecting the Sanitize option and increasing the water temperature.

12 using your dishwasher

Touch controls

Allows you to easily operate the dishwasher.

Convenient operations with a soft touch Simple and stylish design Easy to clean

If you have children or you want to clean the Control Interface, we recommend activating the Child-lock feature to lock the control buttons,

Children will not be able to accidently start the dishwasher by touching the controls with this option selected.

If cycle is running, buttons will not respond. If dishwasher is off, only the Power button is responded

Condensing dry technology

Saves energy by drying the dishes using the remaining heat after the last rinse cycle. Clean and safe. No hot steam is emitted during the drying cycle.

Do not wash the following items

WARNING

Acrylic, Aluminum: Dishes with printed gold rim decoration may become discolored. Dishes treated with adhesive: Treated plastics, wood, ivory, copper and tin may come

loose. Plastics with a temperature tolerance less than 194 °F(90 °C) : Thin plastics wash and

dry poorly, and may be damaged due to elevated wash temperatures. Tin: Tin should be washed by hand and dried immediately as it may rust. Wooden utensils: Wooden items may crack.

Z_ When using the dishwasher, try to the dishes properly as described on 16.

....... , You should remove food remains such as bones, fruit seeds, etc. and any other kind of

waste such as toothpicks, paper, etc. from the dishes as these may cause damage to the dishes, create noise, or even a product malfunction.

Select the appropriate cycle depending on the level of soil and the type of dishes. Use only the proper amount of detergent and rinsing agent.

arrange page

usng your' dishwasher 13

ADJUSTING THE ANGLE OF THE PLATE SUPPORTS

The removable plate supports inthe lower and upper racks allow you to adjust the angle of the tines up to five different levels according to the size and shape of the dishes. To adjust the angles, see the illustrations

below. In the lower rack, the plate support can be easily removed or can be folded to make room for large items

such as pots and pans. In the upper rack, the plate support can also be removed.

Lift up the handles 'A' to remove the plate support. To refit the plate support, align it so it is in place and

then push down the handles 'A'.

14 using your dishwasher

ADJUSTING THE HEIGHT OF THE UPPER RACK

This Samsung dishwasher uses a rack able to accommodate larger sized plates. By adjusting the height of the upper rack, you can make room for different size dishes. You can place dinner plates with a diameter of

14 in. (36 cm) into the lower rack and plates up to 12 in. (30 cm) in diameter into the upper rack.

DMR77 Series

1. To lower the upper rack by 2 in. (5 cm), press the 'A' levers located at the left and right sides of the upper rack and push tne upper rack downwards slightly at the same

time.

2. To raise the upper rack, just pull the upper rack upwards without operating any evers. The levers will latch and the upper racK w be inthe high position.

,/_ We recommend adjusting the height of tne

......._ upper rack before loading dishes into tne

rack, as the dishes may be damaged.

REMOVING THE UPPER RACK

See the illustrations below for removing the upper rack. Pull the upper rack towards the front and then remove it by lifting it up slightly and pulling it towards the

front (asshown in figures below). When loading dishes, we recommend pulling the upper rack sufficiently to the front and then loading it.

Z_ While the upper rack is removable, it must be installed for the dishwasher to operate properly.

....... Ifyou attempt to operate the dishwasher without the rack, noise will occur and the dishwasher will

perform poorly.

usng your dishwasher 15

LOADING THE LOWER RACK

Load cookware (pots, pans, etc.), up to 14 in. (36 cm) in diameter into the lower rack. The lower rack has been especially designed for dinner dishes, soup bowls, plates, pots, lids, casserole dishes and plates.

Load your plates into the center column of the rack so their open sides face towards the right. Load large items such as pans and pots into the dishwasher so their open sides face downwards. We recommend loading cups, stemware and small plates into the upper rack.

See the recommended loading patterns below.

14 place setting 12 place setting 10 place setting

LOADING THE UPPER RACK

The upper rack has been designed for small plates, mugs, glasses and plastic items marked "dishwasher safe". Load your plates into the dishwasher so their open sides face forward. If a number of cups or cookware items need to be washed, you can adjust the angle of the movable tines or remove them to make

more room. Make sure the loaded dishes do not interfere with the rotation of the nozzle which is located at the bottom

of the upper rack. (Check this by rotating the nozzle by hand.)

.....:. xV_:: "\_=:vi/< . .......

14 place setting 12 place setting 10 place setting

Using the glass support

You can load cups or glasses onto the glass support. This is also very convenient for washing wine glasses. Hang your wine glasses onto the pegs of the glass support.

You can fold the glass support back when it is not being used.

16 using your dishwasher

g _i,_

Loadinq the large items

You can load large items such as pans and pots into the lower

rack. Make sure pot handles and other items do not interfere with

rotation of the nozzles.

USING THE CUTLERY BASKET

The cutlery basket consists of three compartments.

Each knife, spoon, or fork can be placed separately into

the spoon stand to prevent chipping and discoloration.

/' , f

_ _ \ ) ....

,;i'!ii:_,i _i>.

DO NOT let item extend the bottom.

(_ Small forks

Spoons

(_ Knives (_ Large spoons and forks

Medium-sized forks

The cutlery basket can be used with the cover either open or removed. Refer to the illustration below to remove the cover. Take care not to break the plastic hinge.

any through

using your dishwasher 17

USING THE DISPENSER

Filling the detergent dispenser

1. Open the cover by pushing the cover latch downwards.

2. Add the recommended amount of detergent to the main wash dispenser using the table below.

3. Close the dispenser cover. You will hear a 'click' when it is closed correctly.

4. When Heavy cycle is selected, add the recommended amount of detergent to the pre-wash dispenser using the

table below.

The cover opens automatically to dispense the detergent during the wash.

Normal, Delicate,

Quick, Smart Auto

Heavy 0.7 oz (20g)

Rinse No detergent

The numbers inside the refer to

18 using your dishwasher

Ma n wash d spenser Pre-wash d spenser

0.5 oz (15g)

dispenser grams.

No detergent

0.2 oz (5 g)

No detergent

Filling the rinse aid dispenser

Your dishwasher has been designed to use liquid rinse aid. The use of a rinse aid greatly improves the drying performance after the final rinse.

1, Turn the dispenser knob counterclockwise to open the

cover.

2, Pour rinse aid into the opening until the indicator points to

"MAX." Avoid overfilling the dispenser.

Adjust the amount of rinse aid released during the rinse operation.

You can adjust the amount over four levels (1-4). The greater the number, the larger the amount of rinse aid

released. The factory default is 3.

When the rinse dispenser is filled up, it is good for about 40 washes.

Close the cover.

Turn the dispenser knob clockwise.

AWe strongly recommended using only liquid rinse aid.

CAUTION

overfilling the

usng your dishwasher 19

nncj

Keeping your dishwasher clean improves its performance, reduces unnecessary repairs, and lengthens its life,

CLEANING THE EXTERIOR

It's best to clean spills on the outside of your dishwasher as they occur. Use a soft damp cloth on the control panel to gently wipe away spills and dust. Do not use benzene, wax, thinner, chlorine bleach, or alcohol. These materials may discolor the inner walls and may cause stains. Do not clean the dishwasher by

sprinkling water over it and avoid water coming into contact with any of the electrical parts.

lf your dishwasher has a stainless steel door panel, it can be cleaned with a stainless steel cleaner for Home Appliances or similar product using a clean, soft cloth.

CLEANING THE INTERIOR

Clean the interior of your dishwasher periodically to remove any dirt or food particles. Wipe the inside of the

dishwasher and the inner part of the door with a wet dishcloth. We recommend running the dishwasher

periodically (using a Quick or Delicate cycle with the sanitize option) with an empty load after inserting

dishwasher detergent. This will keep your dishwasher clean.

Do not remove the Seal tub front (the long rubber seal enclosing the opening of the dishwasher).

CAUTION

CLEANING THE NOZZLES

Ifthe cleaning performance of your dishwasher is continually low or the nozzles seem clogged, you can clean each of the nozzles. When removing the nozzles, take care as they may break.

Lower nozzle

1. Check whether the nozzle hole is clogged by food particles.

2o If cleaning is needed, remove the nozzle by

pulling it upwards.

3o Clean the nozzle and push itback into

place.

4o Check whether the nozzle is engaged

correctly by rotating it by hand.

20 ceanng and maintainng

Middle nozzle

1. Pull the upper rack towards the front and remove it.

2. Check whether the nozzle hole is clogged by food particles.

3. Ifcleaning is needed, remove the nozzle.

4. To remove the nozzle, unfasten and remove the nut, and remove the nozzle.

5. Clean the nozzle, insert it again and fasten the nut.

6. When fastening the nut, rotate it firmly by hand.

7. Check whether the nozzle is engaged correctly by rotating it by hand.

Upper nozzle

1. Check whether the nozzle hole is clogged by food particles.

2. Ifcleaning is needed, remove the nozzle.

3. To remove the nozzle, pull out the upper rack first, remove the duct connected to

the nozzle from the tub bracket, and then remove the nozzle. To remove the bracket,

use tools such as a screwdriver.

4. Clean the nozzle and connect it to the duct.

5. Insert the duct into the bracket.

6. Check whether the nozzle is engaged correctly by rotating it by hand.

STORING YOUR DISHWASHER

Ifyou need to store your dishwasher for an extended period of time, first drain and disconnect it, as your

dishwasher may be damaged if water is left in the hoses and internal components before storage. After draining and disconnecting the dishwasher, be sure to turn off the water supply valve and circuit

breaker.

ceanng and maintainng 21

CYCLE CHART

( ÷: Basic, O: Flexible step)

_iiiili!_:ii_!_iiiiiiiiiiiiii!i!!_!!¸_!!i_i_i_!!i_ii_i!i_!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!ii!i_

Normal 140 °F (60 °O)

120 °F (49 °C) [162 °F(72 °C)

@ @ @ @ @ @ @

@ O @ @ O @

Heavy 158 °F (70 °O)

149 °F (65 °C) [162 °F (72 °C)]

@ @ @ @

Delicate 140 °F (60 °O)

Rinse

113 °F (45 °C) [162 °F (72 °C)]

@ @ @ @

Quick 140 °F (60 °O)

113 °F (45 °C) [162 °F (72 °C)]

5.2~7.7

(19.6~29)

9.0 (34) 182

5.2(19.6) 115

1.3 (4.9)

5.2 (19.6) 38

i__ iii iii_iii

Smart @ O O @ @ O @

Auto 113 °F~ 149 °F (60,_70 °O)

(45~65 °C) [162 °F (72 °C)]

140,_158 °F

5.2~9.0

(19.6,_34 )

The numbers in parentheses inthe Last Rinse column represent the temperature when Sanitize is

selected. The wash time is the same.

When Smart Auto or Normal cycle is selected, the O (flexible) steps can be eliminated depending on the

level of soil of the dishes.

The wash time varies depending on the added steps.

Even though Half Load is selected, the cycle sequence remains the same.

The wash time may vary depending on the water pressure, drain conditions, and temperature of the

supplied water.

110~134

58,_182

22 program

CHECK THESE POINTS IF YOUR DISHWASHER...

Will not start.

Is taking too long with an operation (maybe cycle).

Has a bad odor.

Has water remaining after the cycle has

finished. Has food particles

remain ng on dishes.

Does not dry dishes well.

The door is not closed completely.

No cycle is selected. The power cable is not connected. The water supply does not work.

A circuit is tripped or a fuse is open.

Cold water is being supplied.

There is water left over from the last cycle.

The drain hose is folded or clogged.

An inappropriate cycle has been selected.

The water temperature is low. Connect the water supply line to a

No dishwashing detergent is being Use a automatic dishwasher

used. detergent. The pressure of the supplied water The proper pressure of the supplied

is low. water should be 20-120 psi

A nozzle is clogged. Clean the nozzle. The dishes are improperly loaded.

There is no rinse aid in the dispenser.

The temperature of the water is low when the dishwasher is running.

Check that the door is latched and closed completely.

Select a cycle. Connect the power cable. Check that the water supply valve is

open.

Reset the circuit breaker or replace

the fuse. Check that the water supply line is

connected to a hot water supply. (Additional time is required to heat

cold water.)

Insert detergent without loading

dishes, and run the Quick cycle to clean the dishwasher.

Straighten the hose.

Select a cycle according to the number and soil level of the dishes,

as directed in this manual.

hot water supply.

(140-830 kPa).

Rearrange the dishes so they do not

interfere with the nozzle rotation and the dispenser operation.

Check the dispenser and add rinse aid.

Use rinse aid with the Sanitize

option.

troubleshooting 23

tro Abe hootncj

Has spots and film left

on dishes.

Is too noisy.

Leaves glasses with a

dim polish.

Leaves black or gray

marks on the dishes.

Leaves a yellow or brown

film on the inside of the

dishwasher.

Does not have any lamps

lit up.

Does not have a

smoothly rotating nozzle.

Has a bent upper rack

after loading dishes.

The water temperature is low. For best performance, the

temperature of the supplied water should be 120 °F(49 °C).

The detergent amount is inappropriate.

Too many dishes have been loaded.

Dishes are loaded incorrectly. Load your dishes as recommended.

The pressure of the supplied water is The proper pressure of the supplied insufficient, water is 20-120 psi (140-830 kPa).

Improper detergent is being used. Use a automatic dishwasher

There is no rinse aid. Check the dispenser and add the

The water is too hard. Add a water softener. Sound is generated when the

dispenser cover is open. Sound is generated when the drain

pump is operating in an early stage. The dishwasher is not level.

There is a 'chopping' sound because Rearrange the dishes. a nozzle is bumping against the

dishes. The supplied water is soft and too Underload the dishwasher and use a

much detergent is being supplied, rinse aid to minimize this. Aluminum dishes have been loaded. Remove the marks on the dishes

This occurs from coffee and tea Remove the soils using a spot soils, cleaner.

The power is not connected. The fuse is broken or the circuit

breaker is out of order. The nozzle hole is clogged with food

sarticles.

The dishes are not loaded properly.

Supply the appropriate amount of automatic dishwasher detergent.

Load only an appropriate number of dishes.

(See page 16.)

detergent.

rinse aid.

This is normal operation.

Ensure the dishwasher is level.

using a low sensitivity cleaner.

Connect the power cable. Replace the fuse or repair the circuit

breaker. Clean the nozzle hole.

Load your dishes as recommended. (See page 16.)

24 troubleshooting

INFORMATION CODES

Information codes are displayed to help you better understand what is occurring with your dishwasher.

Thermistor error

Heater error

Water supply error

The temperature of the supplied

[_ _ water is too high

_ Drain error

Water level error (over-level)

Low water level error

Functional error. Disconnect the circuit breaker

and contact a service center.

Functional error. Disconnect the circuit breaker

and contact a service center.

Functional error. Disconnect the circuit breaker

and contact a service center.

Check whether the water supply line is

connected correctly.

Check whether the water supply valve isclosed, the water supply is suspended or the water supply valve or line is frozen or clogged.

Ifthe problem continues, disconnect the circuit

breaker and contact a service center.

Check the temperature of the supplied water. If

it is higher than 176 °F(80 °C), a functional error

may occur with the dishwasher.

Check whether the drain hose is clogged or folded. If the problem continues, disconnect the

circuit breaker and contact a service center.

Functional error. Disconnect the circuit breaker and contact a service center.

Leakage

Key pressed

Half load function error

For any codes not listed above, call 1-800-SAMSUNG(726-7864)

Functional error. Close the water supply valve and disconnect the circuit breaker and contact a

service center.

Functional error. Disconnect the circuit breaker and contact a service center.

troubleshooting 25

a_ppondx

HELPING THE ENVIRONMENT

,, Your dishwasher is manufactured from recyclable materials. Ifyou decide to dispose of it, please

observe local waste disposal regulations. Cut off the power cable so that the appliance cannot be connected to a power source.

,, Remove the door so that animals and small children cannot get trapped inside the appliance. ,, Do not exceed the detergent quantities recommended in the detergent manufacturers' instructions.

SPECIFICATIONS

Type Dishwasher

Power

Wash type Rotating nozzle spray

Dry type Condensed dry system

Used water pressure 20 - 120 psi

Dimensions Built-in (WidthxDepthxHeight)

Rated power usage

Weight Unpacked 115 Ib (52 kg)

120 V/60 Hz AC only, 15 A circuit breaker

(140 - 830 kPa)

Wash motor

Heater

Wash capacity

Wash temperature

Rinse temperature

Standard amount of

used water NUmber of Wash cycles

23.8 x 24.7 x 33.9 in. (605 x 627 x 860 mm)

170W

1100W

14 place setting

Normal 120 °F (49 °C)

Normal 140 °F (60 °C)

Normal 7.7 gal (29 _)

Standard 6 cycles

26 appendix

SAMSUNG DISHWASHER

LiMiTED WARRANTY TO ORiGiNAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by USA: SAMSUNG ELECTRONICS AMERICA,

INC./CANADA: SAMSUNG ELECTRONICS CANADA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:

One (1) Year All Parts and Labor, Five (5)Years Printed Circuit Board, Racking (Labor Charges for in-home service starting from the 2nd year is customer's responsibility), and Lifetime Stainless Door Liner & Tub for leakage. Samsung will replace your unit with same or current model (that is better or equivalent in functionality) (Labor related to replacement is customer's responsibility).

This limited warranty begins on the original date of purchase, and isvalid only on products purchased and used in the United States/Canada. To receive warranty service, the purchaser must contact SAMSUNG for

problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. SAMSUNG will provide in-home service during the warranty period at no charge, subject to availability within the contiguous United States/Canada.

Inhome service is not available inall areas.

To receive in-home service, product must be unobstructed and accessible to the service agent. If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized

service center.

SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period

specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.

This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product and shall not apply to the following: damage that occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning, or other acts of nature or God; use of products, equipment, systems, utilities, services, parts, supplies, accessories,

applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal and reinstallation; problems caused by pest infestations. This limited warranty does not cover problems resulting from

incorrect electric current, voltage or supply, light bulbs, house fuses, house wiring, cost of a service call for instructions, or fixing installation errors. SAMSUNG does not warrant uninterrupted or error-free operation of the product.

warranty 27

+ 63 hidden pages