SAMSUNG DIGIMAX U-CA4, DIGIMAX U-CA401 SERVICE INFORMATION

PCB_PW:Card Socket & uP Program Port

Type 1/2.5 CCD

Image Sensor

Effective Pixel Approx. 4.0 Mega –pixel

Total Pixel Approx. 4.2 Mega –pixel

SHD Lens f = 5.8mm

(35mm film equivalent : 35mm)

F No. F3.2

Still Image mode : 1.0X ~ 4.0X,

Play mode : 1.0X ~ 8.0X

Optical Viewfinder

Optical virtual image viewfinder

LCD Monitor 1.5 color TFT LCD

Type TTL Auto Focus

Range Normal : 60cm ~ infinity, Macro : 6cm ~ 60cm

Type Mechanical and Electronic shutter

Speed Normal Mode : 4 ~ 1/2,000 sec.(Night Scene : 8 ~ 1/2,000 sec.)

Control Program AE Metering (Multi. & Spot)

Exposure Compensation 2.0EV (0.5EV steps)

ISO Equivalent Auto, 100, 200, 400

Modes Auto, Auto & Red - eye reduction, Slow sync, Fill-in flash, Flash off

Flash Range 0.2 ~ 2m

Recharging Time Approx. 5 sec.

Sharpness Soft, Normal, Vivid

Effect Normal, B&W, Sepia

Voice Recording (max 1 hour)

Voice Memo on Still Image (max 10 sec.)

Date Imprinting Date, Date & Time, Off (user selectable)

White Balance Auto/ Daylight/ Cloudy/ Sunset/ Fluorescent/ Tungsten

Modes : Auto, Night, Myset, Text mode

Shooting : Single, Continuous, AEB

With audio (Recording time : memory capacity dependent)

Size : 320x240, 640x480

Self-timer (Single, Double) 10 sec, 2sec, Double self

Internal memory : 32MB flash memory

External memory (optional) : MS Duo (Upto128MB guaranteed)

Still Image : JPEG(DCF), DPOF, EXIF

Storage File Format Movie Clip : AVI(MJPEG)

Audio : WAV

2272: 2272x1704, 2048: 2048x1536,

1600: 1600x1200, 1024: 1024x768, 640: 640x480

Viewfinder

Lens

Shutter

Focusing

Voice Recording

Shooting

Focal Length

Digital Zoom

Still Image

Image Size

Media

Movie Clip

2272: Super fine 14, Fine 28, Normal 43

2048: Super fine 16, Fine 35, Normal 53

1600: Super fine 29, Fine 58, Normal 80

Storage 1024: Super fine 67, Fine 142, Normal 165

640: Super fine 159, Fine 306, Normal 360

* These figures are measured under Samsung’s standard conditions and may vary depending on

shooting conditions and camera settings.

Image Play Single image, Thumbnails, Slide show, Movie clip

Image Edit Trimming, Resizing

Digital output connector : USB

Audio : Mono

Video output : NTSC, PAL (user selectable)

DC power input connector : 5.0V

Primary battery : CP1

Rechargeable battery : Self Charging System,

SLB-1037(1,000mAh, 3.7V))

AC Adapter : SAC-51(5.0V,2.0A)

Included battery source may vary depending on sales region.

Dimensions (WxHxD) 97 x 60 x 15.4mm

Weight Approx. 90g(without batteries and card)

Camera Driver Storage Driver (Windows98/98SE/2000/ME/XP, Mac OS 9.0~10.2)

Application Digimax Viewer 2.1, Arcsoft PhotoImpression 4.0, Digimax Reader

Capacity (32MB Internal Memory)

Interface

Software

Power Source

PC with processor better than MMX Pentium 233MHz (XP : Pentium II 300MHz) Windows 98/98SE/2000/ME/XP Minimum 32MB RAM (XP : 128MB) 140MB of available hard-disk space, USB port, CD-ROM drive, 800

600 pixels, 16-bit colour display compatible monitor (24-bit color display recommended) Power Mac G3 or later Mac OS 9.0 ~ 10.2 Minimum 64MB RAM 110MB of available hard-disk space, USB port, CD-ROM drive, QuickTime 4.0 or later for Movie Clip

For Windows

For Macintosh

No. Description Icons

1 Battery 2 Recording mode 3 Camera shake warning 4 Flash 5 Self-timer 6 Macro 7 Metering 8 Exposure compensation LT

9 Auto focus frame 10 Time 01:00 PM 11 Date 2004/05/01 12 MS DUO indicator 13 White Balance 14 ISO 15 Sharpness 16 Image quality 17 Image size 2272, 2048, 1600, 1024, 640

Number of available shots remaining 29

Remaining time (Movie clip/ Voice recording)

00:01:50/01:00:00 19 Digital Zoom rate X4.0 20 Digital Zoom 21 Voice memo

[ Image & Full Status ]

No. Description Icon

1 Battery

2 Play mode

3 File Type

4 Protect indicator

5 Voice memo

6 DPOF indicator

7 Stored image number 9

SIZE : 2272x1704 Size AV : F3.2 Aperture value TV : 1/60 S Shutter speed ISO : 100 ISO sensitivity FLASH : OFF Whether or not the

flash is used.

DATE : 2004/05/01 Recording date

SIZE : 2272X1704

AV : F3.2

TV : 1/60 S

IS O : 100

FLASH : OFF

DATE : 2004/05/01

IBM PC / MACINTOSH

3.3V/ 2.0A

Digimax U-CA 401

camera

USB Cable

AC Adaptor

Batteries

Alkarain x2

Card

SD & MMC

Power button

Shutter button

Lens

Function Lamp

Flash status lamp(Red)

Play mode/ LCD button

5-function button

Mode switch

Autofocus lamp(Green)

Strap eyelet

Zoom T button (Digital zoom)

Zoom W button (Thumbnail)

Viewfinder

Microphone

LCD monitor

Speaker

Viewfinder

Flash

USB/ AV connection terminal

DC input connection point

Flash/ LEFT button

MENU/ OK button

Macro/ Delete/ DOWN button

Self-timer/ RIGHT button

Voice memo/ UP button

Memory card slot

Battery holder

Battery chamber

Battery chamber cover

To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program.

2. Camera driver installation is complete. Click the [Finish] button.

1. Click the [Install] menu in the Autorun frame. The Digimax U-CA 401 camera driver is installed automatically.

3. A window for which you can select application software will be displayed. Select the application program and click the [Install] button.

4. Install Digimax Viewer. Click [Next >] button.

If you select [Exit] at the step 3, the application

program installation will be cancelled.

If you select [Cancel] at step 4, a window for installing PhotoImpression will be displayed.

Close other programs before installing the application software. Before installing the application software, disconnect the USB connection.

6. A destination selection window will open. Click [Next >]. To copy to the files to another folder, click [Browse ..] and choose a folder you want.

5. The Software License Agreement window will be displayed. If you agree to this, click [Yes], the window will then move to the next step. If you disagree, click [No] and the installation program will be canceled.

7. A window will open, asking you to choose a folder to which program icons will be added. Click [Next >] button. If you want to add the program icons to a different folder, choose another folder, and then click [Next >] button.

8. Digimax Viewer installation is successfully completed. Click the [Finish] button to install PhotoImpression. The system will not reboot even the [Yes, I want to restart the computer now] option is selected. *The frame 8 may not appear according to the

system requirements.

9. Digimax Viewer Installation is completed. The PhotoImpression installation window will be displayed as shown alongside. Click the [OK] button.

If you click [Cancel] in Step 9, the PhotoImpression installation will be canceled and the Restart Computer window will appear.

11. The Software License Agreement window will be displayed. If you agree to this, click [Yes], the window will then move to the next step. If you disagree, click [No] and the installation program will be canceled.

10. A Welcome window will be displayed. Click the [Next >] button.

13. The [Select Components] window will appear. Click [Next >] button.

12. A destination selection window will open. Click [Next >]. To copy to the files to another folder, click [Browse...] and choose a folder you want.

15. Installation is complete. Click the [Finish] button. * The frame 15 may not appear according to the

system requirements.

14. A window will open, asking you to choose a folder to which program icons will be added. Click [Next >] button. If you want to add the program icons to a different folder, choose another folder, and then click [Next >] button.

16. To apply changes, you must restart the computer. Select [Yes, I want to restart my computer now], and then click [OK].

17. After restarting the computer, connect the PC to the camera with the USB cable.

19. If you can see [Removable Disk] under [My computer], the camera driver installation was successful. Now you can transfer image files from the camera to PC via the USB cable.

18. Turn the camera power on. [Found New Hardware Wizard] will open and the computer will recognize the camera.

If you have ever installed an image viewer program or your OS is Windows XP, an image viewer program will open. If the image viewer program opens, the camera driver was setup successfully.

If you have installed the camera driver, [Found New Hardware Wizard] may not open.

On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and

a window asking you to select a driver file may appear.

In this case, specify the [USB Driver] folder on the supplied software CD.

When connecting the camera to your PC, it is recommended that you use an AC power adapter.

Before connecting the camera to the PC, You should first install the camera driver.

After installing the camera driver, you have to restart your PC.

If you connect the camera to the PC before installing the camera driver,

the [Found New Hardware Wizard] will open.

In this case, cancel the [Found New Hardware Wizard] and disconnect the camera.

Install the camera driver and connect the camera to the PC again.

Should the computer not find the camera driver after installation,

please try one or more of the following measures.

1. Delete the camera driver, and re-install the driver.

2. Refer to FAQ to check for a possible solution to the problem.

3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host Controller),

download the patch file from the Samsung Camera web page.

(http://www.samsungcamera.com)

1. FRONT COVER ASSEMBLY

1-1

1-9

1-3

1-2

1-8

1-7

1-4

1-5

1-6

1-4

PARTS LIST

Fig.No. Parts No. Parts Name Q'ty Remarks

1-1 Q9007214101A FRONT COVER ASS'Y-DIGIMAX U-CA 401 1

Q9007214201A FRONT COVER ASS'Y-KENOX ME-4 1

1-2 Q7217321801A FRONT COVER 1

1-3 Q7217321901A VIEW_FINDER_WIN 1

1-4 Q7409165101A FRONT_SHIELD 2

1-5 Q7217322001A FRONT_MIRROR 1

1-6 Q7217322101A FRONT_COSMETIC_A 1

1-7 Q7017041501A FRONT_COSMETIC-DIGIMAX U-CA 401 1

Q7017041601A FRONT_COSMETIC-KENOX ME-4 1

1-8 Q7409166001A PW_CAPTION 1

1-9 Q7217322601A SAMSUNG_LOGO 1

2. BODY ASSEMBLY

2-53

2-50

2-56

2-51

2-57

2-12

2-10

2-7

2-6

2-31

2-29

2-54

2-58

2-44

2-59

2-52

2-39

2-40

2-41

2-46

2-43

2-42

2-55

2-48

2-24

2-11

2-37

2-9

2-8

2-36

2-38

2-47

2-45

2-23

2-22

2-13

2-49

2-35

2-33

2-1

2-4

2-2

2-3

2-33

2-24

2-15

2-18

2-14

2-17

2-25

2-31

2-28

2-6

2-27

2-5

2-31

2-16

2-20

2-26

2-32

2-19

2-31

2-21

2-30

PARTS LIST

Fig.No. Parts No. Parts Name Q'ty Remarks

2-1 Q7211070401A FRAME 1 2-2 Q7411111001A HAND_TRIP_SHAFT 1 2-3 Q7211070501A HAND_TRIP_HOLDER 1 2-4 Q6003043301A SCREW 2 2-5 Q6107057701A RELEASE_SPRING 1 2-6 Q7409166601A SHT_SHIELD_GASKET 2 2-7 Q9008075401A PCB_SHT SMD 1 2-8 Q7409165201A PLAY/BACK METAL DOME 2 2-9 Q7409165801A SHT_PORON 1

2-10 Q7211070601A SHUTTER_KEY 1 2-11 Q7211070701A POWER_KEY 1 2-12 Q7211070801A SHUTTER_HOLDER 1 2-13 Q7011047801A K_SHELL 1 2-14 Q7409165901A BAT_PORON 1 2-15 Q7211070901A RELEASE_KNOB 1 2-16 Q9008075501A PCB_PW SMD 1 2-17 Q7409166701A PW-MIC_SHIELD_GASKET 1 2-18 Q4102008801A PW-BAT FPC 1 2-19 Q7409166801A PW-D_SHIELD_GASKET 1 2-20 Q7409166901A PW&D_SHIELD_GASKET 3 2-21 Q7011047901A EE_PW_PLATE 1 2-22 Q9008075601A PCB_D SMD 1 2-23 Q7409166101A K_CAPTION 1 2-24 Q7409165301A SR&K_TAPE 2 2-25 Q7411111101A BAT_SHAFT 1 2-26 Q6107057801A BAT_SPRING 1 2-27 Q7011048001A BAT_FRAME 1 2-28 Q7211071001A BAT_COVER 1 2-29 Q6107057901A LENS_RING 1 2-30 Q7309043201A IO_COVER 1 2-31 Q6003043401A SCREW 5 2-32 Q6003043501A SCREW 1 2-33 Q6003043601A SCREW 3 2-34 Q6003043701A SCREW 1 2-35 Q9002130401A LENS_UNIT 1 2-36 Q7409165401A LDF_MASK 1 2-37 Q2904002401A LDF 1 2-38 Q7309043301A LDF_RUBBER 1 2-39 Q7012081401A CCD_PLATE 1 2-40 Q9008075701A CCD SMD 1 2-41 Q9004016801A STROBE ASS'Y 1 2-42 Q9008075801A PCB_ST SMD 1 2-43 Q7211071101A ST_HOLDER 1 2-44 Q7011048101A ST_TERMINAL 1 2-45 Q7011048201A ST_METAL_COVER 1 2-46 Q7409165701A ST_TUBE 1 2-47 Q7011048301A ST_PLATE 2 2-48 Q7409166201A ST_CAPTION 1 2-49 Q7211071201A ST_COVER 1 2-50 Q9008075901A PCB_BAT SMD 1 2-51 Q4719003401A PLAY/BACK_METAL DOME 1 2-52 Q4719003501A 5WAY_METAL DOME 1 2-53 Q6107058001A BATTERY_SPRING_A 4 2-54 Q7409167001A SHT_SHIELD_GASKET 1 2-55 Q7409167101A BAT_SHIELD_GASKET_A 1 2-56 Q7409167201A BAT_SHIELD_GASKET_B 2 2-57 Q7409166301A BAT_CAPTION_A 1 2-58 Q7409166401A BAT_CAPTION_B 1 2-59 Q7409166501A BAT_CAPTION_C 2

3. REAR COVER ASSEMBLY

3-1

3-5

3-6

3-17

3-19

3-4

3-2

3-3

3-16

3-18

3-15

3-14

3-8

1-9

3-12

3-11

3-7

3-10

3-13

PARTS LIST

Fig.No. Parts No. Parts Name Q'ty Remarks

3-1 Q9007214301A REAR COVER ASS'Y 1

3-2 Q7217322201A REAR COVER 1

3-3 Q7217322301A LED_PIPE_R 1

3-4 Q7217322401A FUNCTION_KEY 1

3-5 Q7017041401A FUNCTION_KEY_SHEET 1

3-6 Q6107058101A FUNCTION_KEY_SPRING 1

3-7 Q0704010101A SONY_LCD_PANEL 1

3-8 Q7217322501A DP_HOLDER 1

3-9 Q6003043801A SCREW 1

3-10 Q7409165501A K_SPONGE 1

3-11 Q7409165601A LCD_K_TAPE 1

3-12 Q2209002801A MICROPHONE 1

3-13 Q4719003301A SPEAKER 1

3-14 Q9008076001A PCB_K 1

3-15 Q7409167301A D&K_SHIELD_GASKET 1

3-16 Q7409165301A SR&K_TAPE 1

3-17 Q9007214401A PLAY/BACK_KEY ASS'Y 1

3-18 Q9007214501A 5WAYKEY_KEY ASS'Y 1

3-19 Q9007214601A REAR COVER SUB ASS'Y 1

4. PACKING ITEM

4-13 4-14 4-15

4-16

4-19

4-18

4-1

4-4

4-9

4-10

4-11

4-12

4-3

4-17

4-7

4-6

4-5

4-8

4-2

PARTS LIST

Fig.No. Parts No. Parts Name Q'ty Remarks

4-1 QP960210101A PE BAG (FOR CAMERA) 1

4-2 Q6909011601A PE BAG (FOR ACCESSORY) 1

4-3 Q6901187401A INNER PAD 1

4-4 Q6904025501A POUCH 1

4-5 Q6806188901A Q/GUIDE_KENOX CD4_KOR 1

Q6806189001A Q/GUIDE_U-CA 401_ENG 1

Q6806189101A Q/GUIDE_U-CA 401_GER 1

Q6806189201A Q/GUIDE_U-CA 401_FRA 1

Q6806189301A Q/GUIDE_U-CA 401_SPA 1

Q6806189401A Q/GUIDE_U-CA 401_ITA 1

Q6806189501A Q/GUIDE_U-CA 401_CHI(T) 1

Q6806189601A Q/GUIDE_U-CA 401_DUT 1

Q6806189701A Q/GUIDE_U-CA 401_POR 1

Q6806189801A Q/GUIDE_U-CA 401_SWE 1

Q6806189901A Q/GUIDE_U-CA 401_DEN 1

Q6806190001A Q/GUIDE_U-CA 401_FIN 1

Q6806190101A Q/GUIDE_U-CA 401_RUS 1

Q6806190201A Q/GUIDE_U-CA 401_CHI(S) 1

4-6 Q6806190301A U/MANUAL_KENOX CD4_KOR 1

Q6806190401A U/MANUAL_U-CA 401_ENG 1

Q6806190501A U/MANUAL_U-CA 401_GER 1

Q6806190601A U/MANUAL_U-CA 401_FRA 1

Q6806190701A U/MANUAL_U-CA 401_SPA 1

Q6806190801A U/MANUAL_U-CA 401_ITA 1

Q6806190901A U/MANUAL_U-CA 401_CHI(T) 1

Q6806191001A U/MANUAL_U-CA 401_DUT 1

Q6806191101A U/MANUAL_U-CA 401_POR 1

Q6806191201A U/MANUAL_U-CA 401_SWE 1

Q6806191301A U/MANUAL_U-CA 401_DEN 1

Q6806191401A U/MANUAL_U-CA 401_FIN 1

Q6806191501A U/MANUAL_U-CA 401_RUS 1

Q6806191601A U/MANUAL_U-CA 401_CHI(S) 1

4-7 Q6807002601F WARRANTY CARD_KOREA 1

Q6807003003S WARRANTY CARD_EXP 1

Q6807003802D WARRANTY CARD_UK 1

Q6807010902B WARRANTY CARD_RUS 1

Q6807011301B WARRANTY CARD_CHINA 1

Q6807009502D CARD_PRODUCT MEXICO 1

Fig.No. Parts No. Parts Name Q'ty Remarks

4-8 Q6901188401A G/T BOX_KENOX CD4_KOR_Li-ion 1

Q6901187601A G/T BOX_U-CA 401_EXP/AUS 1

Q6901187701A G/T BOX_U-CA 401_USA/CAN 1

Q6901188501A G/T BOX_U-CA 401_EXP/AUS_Li-ion 1

Q6901188601A G/T BOX_U-CA 401_USA/CAN_Li-ion 1

4-9 Q4301002601A DURACELL_LITHIUM BATTERY_CP1 1

4-10 Q4302000201A LITHIUM-ION_SLB-1037 1

4-11 Q3719003301A AC ADAPTOR(SAC-51) 1

4-12 Q3801003001A AC CODE CABLE_KOR 1

Q3801003201A AC CODE CABLE_EXP 1

Q3801003101A AC CODE CABLE_USA 1

Q3801001001A AC CODE CABLE_UK 1

Q3801003401A AC CODE CABLE_AUS 1

4-13 Q7409145001A STRAP 1

4-14 Q3802002001A USB CABLE 1

4-15 Q3802001901A A/V CABLE 1

4-16 Q4602000901A MEMORY STICK_DUO CARD(32MB) 1

4-17 Q4609007201A DRIVER + Digimax Viewer 2.1+ Arcsoft PI 4.0 1

Q4609007301A DRIVER + Digimax Viewer 2.1+ Arcsoft PI 3.0 1 Walmart

Q4609007801A Digimax Reader 1

4-18 Q7409155001A FCC LABEL(MADE IN CHINA) 1

Q7409155101A FCC LABEL(MADE BY SAMSUNG) 1

Q7409155201A MIC LABEL(MADE IN CHINA) 1

4-19 Q6804055401A PRODUCT STICKER 1

Q6804055501A PRODUCT STICKER_MEXICO 1

PAGE PARTS NO. PARTS NAME SPEC SYMBOL

Q9007214101A FRONT COVER ASS'Y-DIGIMAX U-CA 401

16 Q9007214201A FRONT COVER ASS'Y-KENOX ME-4

Q9008075401A PCB_SHT SMD

18 Q7211070601A SHUTTER_KEY

18 Q7211070701A POWER_KEY

18 Q7211070801A SHUTTER_HOLDER

18 Q9008075501A PCB_PW SMD

18 Q4102008801A PW-BAT FPC

18 Q9008075601A PCB_D SMD

Q9002130401A LENS_UNIT

18 Q9008075801A PCB_ST SMD

18 Q7409165701A ST_TUBE

18 Q9008075901A PCB_BAT SMD

Q9008076001A PCB_K

20 Q0704010101A SONY_LCD_PANEL

20 Q9007214601A REAR COVER SUB ASS'Y

46 RELEASE SWITCH SW1

42 MODE SWITCH SW5

41,42 FUSE F1

41 DC JACK J2

39 USB JACK J3

44 TRANSFORMER T1

44 TRIG COIL T2

44 TR Q1

44 TR Q2

44 TR Q3

7. INITIAL PARTS LIST

+ 53 hidden pages