SAMSUNG DIGIMAX L50 Service Manual
2
CONTENTS
Ⅰ.SPECIFICATION
1.CAMERASPECIFICATION ……………………………………………………………………………………… 4
2.SYSTEMREQUIREMENTS ……………………………………………………………………………………… 5
3.TFTLCDPANELMARK ………………………………………………………………………………………… 6
4.CONNECTIONDIAGRAM ………………………………………………………………………………………… 8
5.IDENTIFICATIONOFFEATURES………………………………………………………………………………… 9
Ⅱ.INSTALLATION
………………………………………………………………………………………………… 11
Ⅲ.EXPLODEDVIEWANDPARTSLIST
1.MAINASSEMBLY…………………………………………………………………………………………………20
2.BODYASSEMBLY ………………………………………………………………………………………………22
3.FRONTCOVERASSEMBLY …………………………………………………………………………………… 24
4.FRONT&MIDDLECOVERASSEMBLY ………………………………………………………………………26
5.PACKINGITEM……………………………………………………………………………………………………28
Ⅳ.ADJUSTMENT
1.DIGITALCAMERASERVICE ……………………………………………………………………………………31
2.FIRMWAREVERSION확인 방법 ………………………………………………………………………………37
3.FIRMWAREUPGRADE방법 ……………………………………………………………………………………38
4.FULLVERSIONUPDATE방법 …………………………………………………………………………………44
5.조정 ………………………………………………………………………………………………………………47
6.EEPROMDataRead/Write방법 ………………………………………………………………………………60
Ⅴ.PATTERNDIAGRAM
1.PARTSARRANGEMENTFOREACHPCBASS’Y
1)MAIN ………………………………………………………………………………………………………65
2)POWER_TOP ………………………………………………………………………………………………66
3)POWER_BOTTOM …………………………………………………………………………………………67
4)STROBE_BOTTOM ………………………………………………………………………………………68
5)STROBE_BOTTOM ………………………………………………………………………………………69
6)CCD_FPCB_TOP …………………………………………………………………………………………70
7)CCD_FPCB_BOTTOM ……………………………………………………………………………………71
8)UI_TOP ……………………………………………………………………………………………………72
3
Ⅵ.CIRCUITDIAGRAM
1.BLOCKDIAGRAM…………………………………………………………………………………………………73
2.CIRCUITDIAGRAM
1)MAIN(BUTTONINTERFACE,AUDIO,USB,UART,SPK,X’TAL,ADCANDEJTAG) ………………74
2)MAIN(LCDINTERFACEANDVIDEOOUT)………………………………………………………………75
3)MAIN(DRAM,NAND,SDINTERFACEANDCONFIGURATIONRESISTORS)…………………………76
4)MAIN(MOTORINTERFACE) ………………………………………………………………………………77
5)MAIN(POWERANDRESET) ……………………………………………………………………………78
6)MAIN(STROBE,GPIOANDPWM) ………………………………………………………………………79
7)MAIN(SENSORINTERFACEforSONY) …………………………………………………………………80
8)POWER ……………………………………………………………………………………………………81
9)STROBE ……………………………………………………………………………………………………82
10)UI …………………………………………………………………………………………………………83
11)CCD_FPCB ………………………………………………………………………………………………84
Ⅶ.TROUBLESHOOTING
1.CHECKLISTFORREPAIRING …………………………………………………………………………………85
2.MAINTROUBLESHOOTING ………………………………………………………………………………………86
3.HOWTODISASSEMBLY…………………………………………………………………………………………97
4
Ⅰ.SPECIFICATION
1. SPECIFICATION
Type 1/2.5" CCD
Effective Pixel Approx. 5.0 Mega-pixel
Total Pixel Approx. 5.36 Mega-pixel
Focal Length SHD Lens f = 6.5 ~ 18mm (35mm film equivalent : 39 ~ 109.2mm)
F No. F3.2 ~ F5.4
Still Image mode : 1.0X ~ 4.0X
Play mode : 1.0X ~ 8.0X (depends on image size)
LCD Monitor 2.5" color TFT LCD (230,000 pixel)
Type TTL auto focus
Normal : 80cm ~ infinity
Macro : 10 ~ 80 cm (Wide), 10 ~ 80cm (Tele)
Auto Macro : 10cm ~ Infinity
Type Mechanical and Electronic shutter
Speed 1 ~ 1/2,000 sec. (Night : 15 ~ 1/2,000 sec.)
Control Program AE Metering : Multi, Spot
Exposure Compensation ±2EV (0.5EV steps)
ISO Equivalent Auto, 50, 100, 200, 400
Modes Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off
Range Wide : 0.25 ~ 2.0m, Tele : 0.3 ~ 1.5m
Recharging Time
Approx 4.0sec
Sharpness Soft, Normal, Vivid
Effect Normal, B&W, Sepia, Red, Blue, Green, Negative, RGB
White Balance Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom
Voice Recording (Memory capacity dependant)
Voice Memo in Still Image (Max. 10 sec.)
Date Imprinting Date&Time, Date, Off (user selectable)
Modes : Auto, Program, Scene
* Scene : Night, Portrait, Children, Landscape, Text, Close-up, Sunset, Dawn,
Backlight, Fireworks, Beach & Snow
Continuous : Single, Continuous, AEB
Self-timer : 2 sec., 10 sec., Double (10sec. & 2sec.)
With Audio or without Audio
(user selectable, recording time : memory capacity dependent)
Size : 640x480, 320x240, 160x128
(2.8X Optical Zoom, Mute during Zoom Operation)
Frame rate : 30 fps, 15 fps
Movie Stabilizer (User Selectable)
Movie Editing (Embedded) : Pause during recording, Still Image Capture,
Time Trimming
Internal memory : Approx. 26MB flash memory (Check the real capacity)
External memory : SD card /MMC (Up to 512MB Guaranteed)
Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0
Movie Clip : AVI (MPEG-4) Audio : WAV
DigitalZoom
Range
Lens
Image
Sensor
Focusing
Flash
Shutter
Voice Recording
Shooting
Storage
Movie Clip
Media
Still Image
File Format
5
Ⅰ.SPECIFICATION
5M : 2592x1944 pixels, 4M : 2272x1704 pixels,
3M :2048x1536 pixels, 2M : 1600x1200 pixels,
1M : 1024x768 pixels, VGA : 640x480 pixels
5M : Superfine 9, Fine 18, Normal 27
4M : Superfine 12, Fine 21, Normal 35
3M : Superfine 14, Fine 25, Normal 44
2M : Superfine 24, Fine 42, Normal 60
1M : Superfine 58, Fine 82, Normal 102
VGA : Superfine 126, Fine 149, Normal 164
* These figures are measured under Samsung’s standard conditions and may
vary depending on shooting conditions and camera settings.
Type Single image, Thumbnails, Slide show, Movie Clip, Album
Editing Trimming, Resizing, Rotating, Effect
Digital output connector : USB 2.0 (Mass Storage Class)
Video Out : NTSC & PAL selectable
Audio : Mono (without external codec)
Pictbridge
Rechargeable battery : 3.7V Li-ion battery (SLB-0837)
* Included battery may vary depending on sales region.
Battery Life TBD
Dimensions (WxHxD) 93.3 x 52.1 x 22.3 mm (excluding the projecting parts of the camera)
Weight Approx. 120g (without battery and card)
Operating Temperature 0 ~ 40 °C
Operating Humidity 5 ~ 85%
CameraDriver Storage Driver (Windows98/98SE/2K/ME/XP, Mac OS 9.0~ 10.2)
Application Digimax Viewer, Digimax Reader, Arcsoft PhotoImpression
Optical 2.8X Zoom for Movie & Still
2.5" 230K TMR LCD
Aluminum Material Cover
Power Movie Clip
MPEG-4 VGA 30fps, Supporting Edit on DSC, Movie Stabilizer
Easy Mode Change M Button
Delightful Effect (Color Effect, Highlight, Composite, Photo Frame)
Capacity
(26MB)
Image Size
Storage
Image Rlay
Interface
Power Source
Special Features
Software
2. SYSTEM REQUIREMENTS
For Windows For Macintosh
PC with processor better than MMX Power Mac G3 or later
Pentium 233MHz (XP : Pentium II 300MHz)
Windows 98/98SE/2000/ME/XP Mac OS 9.0 ~ 10.2
Minimum 32MB RAM (XP : 128MB) Minimum 64MB RAM
140MB of available hard-disk space 110MB of available hard-disk space
USB port USB port
CD-ROM drive CD-ROM drive
800x600 pixels, 16-bit colour display compatible
monitor (24-bit colour display recommended)
QuickTime player or a media player that supports AVI file format
DivX(for movie clip)
■ Recording Mode
6
Ⅰ.SPECIFICATION
3. LCD monitor indicator
No. Description Icons
2 Battery
3 Continuous shot AEB
4 Flash
5 Self-timer
6 Macro
7 Metering
8 Card inserted indicator
9 Auto focus frame
10 Camera shake warning
11 Date/Time 2005.07.01 01:00 PM
12 Exposure compensation
13 ISO
14 White Balance
15 RGB RGB
16 Sharpness
17 Image qualit
Number of available shots remaining 15
Remaining time (Movie clip/ Voice recording) 00:01:30/ 01:00:00
20 Voice memo/ Mic.off
21 Optical/ Digital Zomm bar/ Digital Zoom rate
Recording mode
1
19
18
①
②
③
④
⑤
⑥
⑦
⑧
⑬
⑫
⑭
⑮
⑰
⑯
⑱
⑲
⑩⑨
⑪
⑳
Image Size
7
Ⅰ.SPECIFICATION
■ Play Mode
No. Description Icon
1 Playmode
2 Battery
3 File Type
4 Voice memo
5 Protectindicator
6 DPOF indicator
7 Folder name and Stored image number 100-0009
⑦
②
①
③
④
⑤
⑥
Size : 2592X1944 Size
Av : F3.5 Aperture value
Tv : 1/60 Shutter speed
ISO : 100 ISO sensitivity
Flash : Off Whether or not the
flash is used
Date : 2005/07/01 Recording date
[Play mode display]
[Recording information]
Pressing for over 1 Sec.
Pressing for over 1 Sec.
Size : 2592X1944
Av : F3.5
Tv : 1/60
ISO : 100
Flash : Off
Date : 2005/07/01
4. CONNECTION DIAGRAM
8
Ⅰ.SPECIFICATION
rotinoM VT
CAM / MBI
pot paL
redaeR draCdraC DS
elbaC BSU
AelbaC V
9
Ⅰ.SPECIFICATION
Flash
LCD monitor
Shutter button
Power button
Playmode button
speaker
Microphone
Self-timer lamp/
Auto Focus lamp
Lens
5 function button
E(Effect) button
DC/AV
connection terminal
Strap eyelet
Zoom T button
(Digital zoom)
Camera status lamp
Zoom W button
(Thumbnail)
M(Mode/Album) button
+,-/
DELETE button
5. IDENTIFICATION OF FEATURES
10
Ⅰ.SPECIFICATION
Battery chamber
Memory card slot
Battery chamber cover
FLASH/
LEFT button
MENU/
OK button
Macro/ DOWN button
Play & Pause button
SELF-TIMER/ RIGHT
button
Voice memo/ Voice recording/ UP button
11
Ⅱ.INSTALLATION
1. Click the [Install] menu in the Autorun frame.
The camera driver is installed automatically.
2. Installation is complete.
Click the [Finish] button.
3. A windows to check whether the PC has XviD
codec or not will display.
[Preview] : You can check the movie clip display
condition.
[Install] : The XviD codec is installed.
[Cancel] : The XviD codec is not installed and a
window for installing the application
softwares will display.
※ If you didn’t click the [Preview] button, the [Install]
button can’t be selected.
4. If an error listed below takes place during the
preview, click the [Install] button to install the XviD
codec.
- Only a voice plays back.
- An error message displays and the movie clip
does not play back.
* A window shown alongside may display
according to the system requirements.
12
Ⅱ.INSTALLATION
7. The XviD information window will display.
Click the [Next >] button.
8. The destination selection window will open.
Click [Next >] button.
To copy to the files to another folder, click
[Browse...] and choose a folder you want.
5. The XviD codec installation window will be
displayed as shown alongside. Click the [Next >]
button.
6. The Software License Agreement window will be
displayed. If you agree to this, select [I accept the
agreement] and click [Next >] button. The window
will then move to the next step. If you disagree,
select
[I do not accept the agreement] and click [Cancel]
button.
The installation program will be cancelled.
※ The XviD codec is distributed according to the
GNU General Public License and everyone can
copy, distribute and change this codec. For more
information, see the License documents.
13
Ⅱ.INSTALLATION
10. The [Select Additional Tasks] window will display.
Select the additional tasks and click the [Next >]
button.
9. A window will open, asking you to choose a folder
to which program icons will be added.
Click [Next >] button.
If you want to add the program icons to a different
folder, choose another folder, and then click
[Next >] button.
11. The XviD codec is ready to install.
Click the [Install] button.
12. Installation is complete.
Click the [Finish] button.
14
Ⅱ.INSTALLATION
● If you select [Cancel] at step 14, a window for
installing Digimax Reader will be displayed.
15. The Software License Agreement window will be
displayed.
If you agree to this, click [Yes], the window will
then move to the next step.
If you disagree, click [No] and the installation
program will be canceled.
16. A destination selection window will open.
Click [Next >].
To copy to the files to another folder, click
[Browse..] and choose a folder you want.
● If you select [Exit] at step 13, the application
program installation will be cancelled.
13. A window where you can choose the program you
want to install will appear. Click [Install].
14. The [Digimax Viewer 2.1] installation window will
be displayed as shown alongside.
Click the [Next >] button.
15
Ⅱ.INSTALLATION
18. Digimax Viewer installation is successfully
completed. Click the [Finish] button to install
Digimax Reader.
* The system will not reboot even the [Yes, I want
to restart the computer now] option is selected.
* The real frame 18 can be different with the
illustration according to the system requirements.
17. A window will open, asking you to choose a folder
to which program icons will be added.
Click [Next >] button.
19. A window will be displayed as shown alongside.
Click the [INSTALL] button.
- Check the [MANUAL] button. Instructions for
using Digimax reader will be displayed.
- Click the [EXIT] button and Digimax reader
installation will be cancelled and a window for
installing PhotoImpression will be displayed.
20. A window will open.
Click the [Next >] button.
16
Ⅱ.INSTALLATION
24. The PhotoImpression installation window will be
displayed as shown alongside.
Click the [OK] button.
23. Digimax Reader Installation is completed.
Click the [Finish] button and PhotoImpression
installation will be started. The system will not
reboot even if the [Yes, I want to restart the
computer now] option is selected.
* The frame that appears may be different to that
shown according to the system requirements.
22. A destination selection window will open.
Click [Next >].
To copy to the files to another folder, click
[Browse...] and choose a folder you want.
21. The Software License Agreement window will be
displayed. If you agree to this, click [Yes], the
window will then move to the next step. If you
disagree, click [No] and the installation program
will be cancelled.
17
Ⅱ.INSTALLATION
26. The Software License Agreement window will be
displayed.
If you agree to this, click [Yes], the window will
then move to the next step.
If you disagree, click [No] and the installation
program will be canceled.
25. A Welcome window will be displayed.
Click the [Next >] button.
27. A destination selection window will open.
Click [Next >]. To copy to the files to another
folder, click [Browse...] and choose a folder you
want.
28. The [Select Components] window will appear.
Click [Next >] button.
18
Ⅱ.INSTALLATION
31. To apply changes, you must restart the computer.
Select [Yes, I want to restart my computer now],
and then click [Finish].
33. Turn the camera power on.
[Found New Hardware Wizard] will open and the
computer will recognise the camera.
* If you have ever installed an image viewer
program or your OS is Windows XP, an image
viewer program will open.
If the image viewer program opens, the camera
driver was setup successfully.
32. After restarting the computer, connect the PC to the camera with the USB cable.
29. A window will open, asking you to choose a folder
to which program icons will be added.
Click [Next >] button. If you want to add the
program icons to a different folder, choose another
folder, and then click [Next >] button.
30. PhotoImpression Installation is completed.
Click the [Finish] button.
* The system will not reboot even if the [Yes, I want
to restart the computer now] option is selected.
* The frame that appears may be different to that
shown according to the system requirements.
19
Ⅱ.INSTALLATION
34. If you can see [Removable Disk] under
[My computer], the camera driver installation was
successful.
Now you can transfer image files from the camera
to PC via the USB cable.
● If you have installed the camera driver, [Found New Hardware Wizard] may not open.
● On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens
and a window asking you to select a driver file may appear. In this case, specify
"USB Driver" in the CD supplied. (for Windows 98 and 98 SE).
● Before connecting the camera to the PC, You should first install the camera driver.
● After installing the camera driver, you have to restart your PC.
● If you connect the camera to the PC before installing the camera driver, the [Found New
Hardware Wizard] will open.
In this case, cancel the [Found New Hardware Wizard] and disconnect the camera.
Install the camera driver and connect the camera to the PC again.
● Should the computer not find the camera driver after installation, please try one or more
of the following measures.
1. Delete the camera driver , and re-install the driver.
2. Refer to FAQ to check for a possible solution to the problem.
3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host
Controller), download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)
20
Ⅲ.EXPLODEDVIEWANDPARTLIST
1. MAIN ASSEMBLY
1-2
1-1
1-2
1-2
21
Ⅲ.EXPLODEDVIEWANDPARTLIST
▶
PARTS LIST
1-1 Q6002026101A SCREW 2 X
1-2 Q6002026201A TAPPING SCREW 5 X
Fig.No Parts No. Parts Name Q’ty
Supply Available Parts
Remarks
22
Ⅲ.EXPLODEDVIEWANDPARTLIST
2. BODY ASSEMBLY
2-41
2-18
2-20
2-19
2-45
2-44
2-34
2-38
2-35
2-33
2-
2-12
40
2-37
2-11
2-16
2-39
2-36
2-15
2-13
2-14
2-42
2-17
2-26
2-27
2-31
2-32
2-25
2-21
2-29
2-22
2-28
2-23
2-30
2-24
2-1
2-10
2-8
2-43
2-4
2-2
2-3
2-7
2-5
2-6
2-9
23
Ⅲ.EXPLODEDVIEWANDPARTLIST
▶
PARTS LIST
2-1 Q9002142101A LENS MODULE 1 O
2-2 Q2904003301A IR CUT 1 O
2-3 Q7309047201A CCD RUBBER 1 O
2-4 Q0604005301A CCD SENSOR 1 X
2-5 Q7012086001A CCD METAL PLATE 1 X
2-6 Q6002026301A SCREW 3 X
2-7 Q9008090501A SMT ASSY -CCD-FPC BD 1 X
2-8 Q7409200001A MYLAR LENS 1 O
2-9 Q7409200101A MYLAR LENS-1 1 O
2-10 Q7204024501A BATTERY DOOR 1 O SILVER
Q7204025801A BATTERY DOOR 1 O BLUE
Q7204025901A BATTERY DOOR 1 O WINE
2-11 Q7411121101A BATTERY-DOOR-AXIS 1 O
2-12 Q7001005201A BTY CONTANCT 1 O
2-13 Q6107065101A BTY DOOR SPRING 1 O
2-14 Q6002026401A TAPPING SCREW 3 X
2-15 Q6107065301A BTY SPRING 3 O
2-16 Q7204024701A FRAME 1 O
2-17 Q7209001501A BOLT 1 O
2-18 Q9008090601A MAIN BD ASSY 1 O
2-19 Q9008090701A POWER BD ASSY 1 O
2-20 Q6002026501A TAPPING SCREW 3 X
2-21 Q3001000701A SPEAKER 1 O
2-22 Q0601006601A LED 1 O
2-23 Q7409200201A LCD TAPE 3 X
2-24 Q3003000701A MIC. 1 O
2-25 Q7101000901A LCD PANNEL 1 O
2-26 Q9008090801A UI BD ASSY 1 O
2-27 Q7409200901A UI TAPE 1 X
2-28 Q6002026601A TAPPING SCREW 3 X
2-29 Q6002026701A TAPPING SCREW 1 X
2-30 Q7204024601A MIC FIXER 1 O
2-31 Q7101001001A BTY HOUSING 1 O
2-32 Q6002026801A TAPPING SCREW 2 X
2-33 Q7014006901A REFLECTOR 1 O
2-34 Q7001005301A REFLECTOR CONTACT 1 O
2-35 Q7112009401A FLASH FIXER 1 X
2-36 Q0611004601A FLASH TUBE 1 O
2-37 Q7309042501A FLASH-BAND 1 O
2-38 Q9008090901A SMT ASSY -STROBE BD 1 O
2-39 Q6002026901A TAPPING SCREW 2 X
2-40 Q6002026501A TAPPING SCREW 1 X
2-41 Q2401009201A FLASH EC 1 O
2-42 Q6002026501A TAPPING SCREW 1 X
2-43 Q9010051101A FPC-SENSOR BOARD 1 O
2-44 Q9008091001A FLASH REFLECTOR ASM 1 O
2-45 Q9008091101A
STROBE BOARD WITHOUT EC ASM
1O
Fig.No Parts No. Parts Name Q’ty
Supply Available Parts
Remarks
24
Ⅲ.EXPLODEDVIEWANDPARTLIST
3. FRONT COVER ASSEMBLY
3-8
3-1
5
3-
3-6
3-7
3-3
3-4
3-2
25
Ⅲ.EXPLODEDVIEWANDPARTLIST
▶
PARTS LIST
3-1 Q7217360601A FRONT COVER - DIGIMAX 1 O SILVER
Q7217361501A FRONT COVER - DIGIMAX 1 O BLUE
Q7217361601A FRONT COVER - DIGIMAX 1 O WINE
Q7217361701A FRONT COVER - KENOX 1 O SILVER
Q7217361801A FRONT COVER - KENOX 1 O BLUE
Q7217361901A FRONT COVER - KENOX 1 O WINE
3-2 Q7102000301A LENS RING 1 O
3-3 Q7111002401A GRIP 1 O
3-4 Q7409200301A GRIP TAPE 1 X
3-5 Q6002026401A TAPPING SCREW 1 X
3-6 Q7214088601A FLASH PANEL 1 O
3-7 Q7209001601A LAMP COVER 1 O
3-8 Q9007238401A
FRONT COVER SUB ASSY-DIGIMAX
1 O SILVER
Q9007238701A
FRONT COVER SUB ASSY-DIGIMAX
1 O BLUE
Q9007238801A
FRONT COVER SUB ASSY-DIGIMAX
1 O WINE
Q9007238901A FRONT COVER SUB ASSY-KENOX 1 O SILVER
Q9007239001A FRONT COVER SUB ASSY-KENOX 1 O BLUE
Q9007239101A FRONT COVER SUB ASSY-KENOX 1 O WINE
Fig.No Parts No. Parts Name Q’ty
Supply Available Parts
Remarks
26
Ⅲ.EXPLODEDVIEWANDPARTLIST
4. FRONT & MIDDLE COVER ASSEMBLY
4-20
4-14
4-13
4-19
4-2
4-4
4-21
4-1
4-7
4-6
4-11
4-10
4-9
4-5
4-8
4-15
4-12
4-18
4-16
4-17
4-3
27
Ⅲ.EXPLODEDVIEWANDPARTLIST
▶
PARTS LIST
4-1 Q7204024801A REAR COVER 1 O SILVER
Q7204026001A REAR COVER 1 O BLUE
Q7204026101A REAR COVER 1 O WINE
4-2 Q7217360701A BACK LED 1 X
4-3 Q7409200401A LCD SPONGE 1 O
4-4 Q7409200501A MIDDLE TAPE 1 X
4-5 Q7217360801A MIDDLE COVER 1 O
4-6 Q7209001701A STRAP HOLDER 1 O
4-7 Q7217360901A USB COVER 1 O
4-8 Q7101001101A E LOCK 2.5 1 X
4-9 Q7204024901A POWER BUTTON 1 O
4-10 Q6107065201A SHUTTER SPRING 1 O
4-11 Q7204025001A CAPTURE BUTTON 1 O
4-12 Q7307006301A BUTTON RUBBER 1 O
4-13 Q7204025101A ZOOM BUTTON 1 O
4-14 Q7204025201A MODE BUTTON 1 O
4-15 Q7204025301A FUNCTION BUTTON 1 O
4-16 Q7204025401A PLAYBACK BUTTON 1 O
4-17 Q7204025501A DELETE BUTTON 1 O
4-18 Q7204025601A DIRECTION BUTTON 1 O
4-19 Q7204025701A SET BUTTON 1 O
4-20 Q9007238501A FUNCTION ASM 1 O
4-21 Q9007238601A BACK AND MIDDLE COVER ASSY 1 O SILVER
Q9007239201A BACK AND MIDDLE COVER ASSY 1 O BLUE
Q9007239301A BACK AND MIDDLE COVER ASSY 1 O WINE
Fig.No Parts No. Parts Name Q’ty
Supply Available Parts
Remarks
28
Ⅲ.EXPLODEDVIEWANDPARTLIST
5. PACKING ITEM
5-11 5-20 5-17 5-18
5-12 5-13
5-19
5-15
5-1
5-4
5-14
5-10
5-9
5-5
5-8
5-2
5-8
5-6
5-3
29
Ⅲ.EXPLODEDVIEWANDPARTLIST
▶
PARTS LIST
5-1 QP960210101A PE BAG (FOR CAMERA) 1 O
5-2 Q6909011601A PE BAG (FOR ACCESSORY) 1 O
5-3 Q6909016902A AIR BAG(FOR CAMERA) 1 O
5-4 Q6909017001A AIR BAG(FOR POUCH) 1 O
5-5 Q6901212501A
INNER PAD_D Digimax L50_KOR/EXP
1 O
5-6 Q6904027301A POUCH_Digimax L50 (SAMSUNG) 1 O
5-7 Q6806268801A Q/GUIDE_Digimax L50_ENG 1 O
Q6806268701A Q/GUIDE_KENOX X1_KOR 1 O
Q6806268901A Q/GUIDE_Digimax L50_GER 1 O
Q6806269001A Q/GUIDE_Digimax L50_FRA 1 O
Q6806269101A Q/GUIDE_Digimax L50_SPA 1 O
Q6806269201A Q/GUIDE_Digimax L50_ITA 1 O
Q6806269301A Q/GUIDE_Digimax L50_TUR 1 O
Q6806269401A Q/GUIDE_Digimax L50_DUT 1 O
Q6806269501A Q/GUIDE_Digimax L50_POR 1 O
Q6806269601A Q/GUIDE_Digimax L50_SWE 1 O
Q6806269701A Q/GUIDE_Digimax L50_DEN 1 O
Q6806269801A Q/GUIDE_Digimax L50_FIN 1 O
Q6806269901A Q/GUIDE_Digimax L50_RUS 1 O
Q6806270001A Q/GUIDE_Digimax L50_CHI(S) 1 O
Q6806270101A Q/GUIDE_Digimax L50_CHI(T) 1 O
Q6806270201A Q/GUIDE_Digimax L50_IND 1 O
Q6806270301A Q/GUIDE_Digimax L50_ARA 1 O
5-8 Q6806270501A U/MANUAL_Digimax L50_ENG 1 O
Q6806270401A U/MANUAL_SAMSUNG X1_KOR 1 O
Q6806270601A U/MANUAL_Digimax L50_GER 1 O
Q6806270701A U/MANUAL_Digimax L50_FRA 1 O
Q6806270801A U/MANUAL_Digimax L50_SPA 1 O
Q6806270901A U/MANUAL_Digimax L50_ITA 1 O
Q6806271001A U/MANUAL_Digimax L50_TUR 1 O
Q6806271101A U/MANUAL_Digimax L50_DUT 1 O
Q6806271201A U/MANUAL_Digimax L50_POR 1 O
Q6806271301A U/MANUAL_Digimax L50_SWE 1 O
Q6806271401A U/MANUAL_Digimax L50_DEN 1 O
Q6806271501A U/MANUAL_Digimax L50_FIN 1 O
Q6806271601A U/MANUAL_Digimax L50_RUS 1 O
Q6806271701A U/MANUAL_Digimax L50_CHI(S) 1 O
Fig.No Parts No. Parts Name Q’ty
Supply Available Parts
Remarks
30
Ⅲ.EXPLODEDVIEWANDPARTLIST
▶
PARTS LIST
5-8 Q6806271801A U/MANUAL_Digimax L50_CHI(T) 1 O
Q6806271901A U/MANUAL_Digimax L50_IND 1 O
Q6806272001A U/MANUAL_Digimax L50_ARA 1 O
5-9 Q6807003003U WARRANTY CARD_EXP 1 O
Q6807002601F WARRANTY CARD_KOREA 1 O
Q6807010903C WARRANTY CARD_RUS(3 YEARS) 1 O
Q6807011301B WARRANTY CARD_TSOE(CHINA) 1 O
Q6807012101A WARRANTY CARD_IRAN 1 O
5-10 Q6901212701A G/T BOX_Digimax L50_EXP/AUS 1 O
Q6901212601A G/T BOX_SAMSUNG X1_KOR 1 O
Q6901212801A G/T BOX_Digimax L50_USA/CAN 1 O
5-11 Q7409197001A STRAP_Digimax L50 1 O
5-12 Q3802002801A USB CABLE_Digimax L50/UCA 4 1 O
5-13 Q3802002901A AV CABLE_Digimax L50/UCA 4 1 O
5-14 Q4609012001A
DRIVER + Digimax Viewer + Arcsoft PhotoImpression
1 O
5-15 Q7409197101A
FCC LABEL_Digimax L50_EXP (MADE IN CHINA)
1 O
Q7409197201A
FCC LABEL_Digimax L50_EXP (MADE BY SAMSUNG)
1 O
Q7409197301A
MIC LABEL_SAMSUNG X1(MADE IN CHINA)
1 O
5-16 Q6804082501A PRODUCT STICKER_DIGIMAX L50 1 O
5-17 Q4602000701A
SECURE DIGITAL CARD(64MB) Samsung
1 O
Q4602001301A
SECURE DIGITAL CARD(128MB) Samsung
1 O
5-18 Q4302000501A LITHIUM-ION_SLB-0837 1 O
5-19 Q4309002001A CHARGER_SBC-L5 1 O
5-20 Q3801003201A AC CODE CABLE_EXP-D1 1 O
Q3801003001A AC CODE CABLE_KOR-D1 1 O
Q3801003101A AC CODE CABLE_USA-D1 1 O
Q3801001001A AC CODE CABLE_UK-DSC220SE 1 O
Q3801003401B AC CODE CABLE_AUS-D1 1 O
Fig.No Parts No. Parts Name Q’ty
Supply Available Parts
Remarks
31
Ⅳ.ADJUSTMENT
1. Digital camera service
To take a digital camera service (Repair, Tuning and Checking), the following equipments have to be arranged.
The sequences for the camera service are as shown.
1. Receiving the camera
When receiving a camera, check whether the accessories are
included or not and ask the customer exact problems.
2. Checking the camera
Checking the camera with priority given to the exact problems
to find overall malfunctions.
3. Repairing the camera
Repair the camera malfunctions found at the step 2.
4. Inspection
After repairing the camera, inspect all of the camera functions.
(See p.56)
※ The illustrations may be different from the real display in accordance with the camera model.
1. Checking the camera and Inspection
2. Repairing the camera 3. Tuning
Receiving the camera
Checking the camera
Repairing the camera
Tuning
Inspection
Finish
Loading...