Samsung DCB-H360R User Manual

DCB-H360R

Instructions for use

MF68-00397A

DIGITAL CABLE HD RECEIVER

REV. 1.1

DIGITAL CABLE HD RECEIVER

SAFETY INSTRUCTIONS

This STB has been manufactured to satisfy international safety standards. Please read the following recommended safety precautions carefully.

MAINS SUPPLY: AC 100-240V~, 50/60Hz OVERLOADING: Do not overload wall outlets, extension cords or adapters as this

can result in fire or electrical shock.

LIQUIDS: Keep liquids away from the STB. CLEANING: Before cleaning, disconnect the STB from the wall socket.

Use a cloth lightly dampened with water(no solvents) to clean the exterior.

VENTILATION: Do not block the STB ventilation holes. Ensure that free airflow is

maintained around the STB. Never store the STB where it is exposed to direct sunlight or near heating equipment e.g. a radiator. Never stack other electronic equipment on top of the STB. Place the STB at least 30mm from the wall. Need at least 10mm from the top and both side of the STB for ventilation.

DCB-H360R

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature,

indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

ATTACHMENTS: Do not use any attachment that is not recommended by the

manufacturer; it may cause a hazard or damage the equipment.

SERVICING: Do not attempt to service this product yourself.

Any attempt to do so will make the warranty invalid. Refer all servicing to a qualified service agent.

LIGHTNING: If the STB is installed in an area subject to intense lightning activity,

protection devices for the STB mains connector and modem telephone line are essential. The individual manufacturer’s instruction for safeguarding other equipment, such as TV set, Hi-Fi, etc., connected to the STB must also be followed during lightning storms.

GROUNDING: CATV cable MUST BE EARTHED.

The grounding system must comply with local regulations.

NNoottee : Dispose the used batteries at designated place for environment protection.

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

GB-1

DCB-H360R

TECHNICAL OVERVIEW

What are SDTV and HDTV ?

SDTV

SDTV is a digital TV format that provides a high quality picture at resolutions that can be displayed on standard TV sets (see more on resolutions later in this chapter).

HDTV

HDTV is a digital TV format that provides the highest quality picture at resolutions that can be displayed on computer monitors and HDTV-ready TV displays (see more on resolutions later in this chapter).

Resolution

Resolution refers to the number of pixels on the screen. The higher the resolution, the better the visual quality. Digital broadcasts are classified into HD and SD grades according to the visual quality. In general, HD (High Definition) grade supports resolutions of 1920x1080i and 1280x720p and an aspect ratio of 16:9 for both ATSC and DVB standards. SD (Standard Definition) grade supports resolutions of 720x480p and 720x480i for the ATSC standard, and supports resolutions of 720x576p and 720x576i for the DVB standard. SD grade usually supports an aspect ratio of 4:3. However, it may differ depending on the region.

DVB-C ( Cable Digital Video Broadcasting)

Aspect ratio

In addition to resolution, HDTV is also defined by the aspect ratio of its broadcasts. Aspect ratio means the shape of the screen as defined by the ratio of the screen’s width to its height. For analog TV and SDTV, the aspect ratio is 4 units wide by 3 units high (usually written 4:3). This is the familiar shape of conventional TVs — slightly wider than they are tall. For HDTV broadcasts, the aspect ratio is 16:9 (nearly twice as wide as it is tall). This is, not coincidentally, more like the shape of movies shown in theaters. This makes HDTV an ideal format for broadcasting and viewing movies on a TV. But what happens if you are watching a nearly square-shaped 4:3 broadcast on a rectangular 16:9 TV, or vice-versa? The HD Receiver allows you to choose from a variety of screen formats to help you deal with those scenarios.

Dolby®Digital 5.1

Dolby Digital 5.1 provides 5 discrete channels of digital audio information for use by A/V receivers capable of decoding the 5.1 channel signal. The audio signals are broken into left-front, center, right-front, left-rear, right-rear and a low-frequency effects channel (designed for subwoofers). The result when connected to a compatible Dolby Digital 5.1 channel A/V receiver and speaker setup is a home theater experience that provides much of the dynamic range, 360-degree imaging, and sonic excitement of a real theater. To take full advantage of the Dolby Digital 5.1 capabilities of the HD Receiver, you will need a Dolby Digital 5.1 compatible A/V receiver connected to the HD Receiver through the Dolby Digital Optical jack. AC-3 is a sound encoding/decoding technology developed in 1987 for movie theatres and means an AC-3 bit stream. AC-3 is used synonymously with Dolby Digital nowadays.

Digital video broadcasting - cable (DVB-C) is European standard DVB for digital broadcasting transmission via cable. DVB-C system provide audio/video digital transmission through mpeg-2 format and utilize QAM modulation system. DVB-C standard has been developed so that a digital broadcasting signal can be sent through VHF/UHF channels. The advantages of this standard are relatively protected environment with respect to distortion and signal path attenuation so a higher signal to noise ratio can be achieved and no negative effect from multipath so higher order modulation schemes can be implemented.

GB-2

DIGITAL CABLE RECEIVER

HDMI (High Definition Multimedia Interface)

HDMI is an interface to enable the digital transmission of video and audio data with just a single connector.Using HDMI the receiver transmits a digital video and audio signal and displays as a vivid picture on a TV having an HDMI input jack.

GB-3

DCB-H360R

CONTENT

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Technical Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Connecting Your “STB” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Basic Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Operating The Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

1. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

1.1 Manual Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

1.2 Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

1.3 Reset to Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . 24

1.4 Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

2. Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

2.1 Update List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

2.2 Favorite Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

2.3 Set Channel Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3. System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3.1 Language Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3.2 OSD Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

3.3 Media Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

3.4 Change PIN Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

3.5 Timer Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

3.6 System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4. Mail Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

5. Irdeto Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.1 CA Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.2 IRD Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.3 Loader Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Available TV Manufacturer Numbers . . . . . . . . . . . . . . . . . . . . . . . 32

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

1. USER SECTION

2. TUNER SECTION

3. VIDEO SECTION

4. AUDIO SECTION

GENERAL FEATURES

DIGITAL HD/SDTV BROADCASTING RECEPTION SOFTWARE DOWNLOAD VIANETWORK

ADVANCED ELECTRONIC PROGRAM GUIDE MULTI LANGUAGE SUPPORTED FOR OSD SUBTITLE & TELETEXT(OSD ) SUPPORTED WITH MULTI LANGUAGE FULL FUNCTION INFRARED REMOTE CONTROL UNIT SCART OUTPUT LOW POWER CONSUMPTION 4 FAVORITE LISTS AUTO UPDATED EPG PASS LOOP FOR RGB SIGNAL 15 TIMERS TO RESERVE PROGRAMS(EVENTS) FOR TURNING

ON/OFF

VHF, UHF BAND 50.5~858 MHz MAX 7.252 Msps SYMBOL RATE 16~256 QAM Modulation Format RF LOOP-THROUGH OUTPUT FOR OTHER RECEIVER OR TV

DVB-C COMPLIANT MPEG-2: HD(MP@HL), SD(MP@ML) H.264: MP@L3, MP@L4, HP@L4 up to 30 Mbps USER SELECTABLE OUTPUT FORMATS 1080i, 720p, 576p, (576i) 1~30 Mbps DATA RATE SUPPORTS ASPECT RATIO 4:3(NORMAL) AND 16:9(WIDE SCREEN) HDMI, COMPONENT, COMPOSITE, SCART

DOLBY DECODING MPEG-1 AUDIO LAYER 1, LAYER 2

MPEG-2 AUDIO MONO, DUAL, STEREO AND JOINTSTEREO AUDIO MODE 32, 44.1 AND 48 kHz SAMPLING FREQUENCIES VOLUME CONTROLAND MUTE FUNCTION THROUGH REMOTE CONTROL SPDIF DIGITALAUDIO OUTPUT

GB-4

DIGITAL CABLE RECEIVER

GB-5

DCB-H360R

YPbPrL

HDMI

ANT.IN

(OPTICAL)

AUDIO OUT

DIGITAL

HDMI OUT

RF OUT

VIDEO OUT

AUDIO OUT

VIDEO OUT

COMPONENT

AV1

(TV)

AV2

(EXT)

ANT.IN

RF OUT

VIDEO OUT

AUDIO OUT

VIDEO OUT

COMPONENT

AV1

(TV)

AV2

(EXT)

YPbPrL

HDMI

ANT.IN

RF OUT

VIDEO OUT

AUDIO OUT

VIDEO OUT

COMPONENT

ANT.IN

(OPTICAL)

AUDIO OUT

DIGITAL

HDMI OUT

RF OUT

VIDEO OUT

AUDIO OUT

VIDEO OUT

COMPONENT

AV1

(TV)

AV2

(EXT)

DCB-H360R

Connecting Y our STB

CONNECTING YOUR “STB”

Connecting the receiver cable system

ANT.IN Connection

After installing your cable system, connect the coaxial cable to “ANT.IN” terminal marked at the rear of the STB.

All cable connectors should be finger tightened; do not use any kind of wrench while tightening connectors. The cable should be 75ohm impedance coaxial cable.

RF OUT Connection

To facilitate the user using analog receiver to view analog channels, STB has been provided with a loop through terminal marked as “RF OUT”.

Connect the coaxial cable from this terminal to the IF input terminal of your analog receiver. Now by keeping the STB in standby, you will be able to tune and view analog channels from your analog receiver.

Set-Top Box Rear Panel

Connecting the Set-Top Box to a TV Set

Composite Connection

1. Connect the cable system to the ANT.IN jack on the Set-Top Box.

2. Connect the Video Cables. Connect a Composite video cable between

the VIDEO OUT jacks on the Set-Top Box and the TV INPUT jacks on the TV.

3. Connect the Audio Cables. Connect an audio cable between the L/R AUDIO OUT jacks on the Set-Top Box and the L/R AUDIO IN jacks on the TV.

Component Connection

1. Connect the cable system to the ANT.IN jack on the Set Top Box

2. Connect the Video Cables. YPBPR format :

Connect a Component video cable between the VIDEO OUT jacks on the Set-Top Box and the TV INPUT jacks on the TV.

3. Connect the Audio Cables. Connect an audio cable between the

L/R AUDIO OUT jacks on the Set-Top Box and the L/R AUDIO IN jacks on the TV.

Set-Top Box Rear Panel

GB-6

DIGITAL CABLE RECEIVER

GB-7

DCB-H360R

(OPTICAL)

AUDIO OUT

DIGITAL

HDMI OUT

AV1

(TV)

AV2

(EXT)

ANT.IN

(OPTICAL)

AUDIO OUT

DIGITAL

HDMI OUT

RF OUT

VIDEO OUT

AUDIO OUT

VIDEO OUT

COMPONENT

AV1

(TV)

AV2

(EXT)

YPbPrL

HDMI

REAR VCR

TV REAR PANEL

HDMI

ANT.IN

(OPTICAL)

AUDIO OUT

DIGITAL

HDMI OUT

RF OUT

VIDEO OUT

AUDIO OUT

VIDEO OUT

COMPONENT

AV1

(TV)

AV2

(EXT)

DCB-H360R

Scart Connection

1. Connect the cable system to the ANT.IN jack on the Set-Top Box.

2. Connect a Scart cable between

the VCR OUT jacks on VCR and the Scart AV2 (EXT) jacks on the STB.

3, Connect Scart cable between AV1

(TV) jack on the STB and jack Scart Input on the TV

Connecting Y our STB

Set-Top Box Rear Panel

Connecting Y our STB

Connecting the Set-Top Box to a TV with a HDMI jack

Set-Top Box Rear Panel

1. Connect the cable system to the ANT.IN jack on the Set-Top Box.

2. Connect a HDMI cable between the HDMI OUT jack on the Set-Top Box and the HDMI IN jack on the HDMI device (TV , Monitor)

NNoottee : Depend on the any receiver, HDMI

out may not operate properly.

Connecting an Audio Component

There are many types of audio systems on the market today. A simplified illustration of an audio system is shown to the right. For more information, see your audio system owner’s manual.

For An optical digital audio input, connect the audio system to the DIGITALAUDIO (OPTICAL)

GB-8

DIGITAL CABLE RECEIVER

jack on the Set-Top Box.

Set-Top Box Rear Panel

GB-9

DCB-H360R

Connecting Y our STB

Selecting the Resolution and the DTV Output Signal

You can select the appropriate video output for the connected TV or monitor mode.

To select the resolution:

● Select a resolution by using the RESOLUTION key on the

remote control and referring to the following table.

NNoottee : EXIT key at the front of the HD receiver also

operates as RESOLUTION key, when any OSD is not displayed on the screen.

To select the video output signal:

● Select the output signal by using the VIDEO OUTPUT

key on the remote control and referring to the following table.

RGB: Select the output signal by using the

VIDEO OUTPUT key on the remote control referring to the following table.

BPR: Select YPBPR when the TV is connected to the

Component (YP of the HD receiver.

Resolution and Video Output

Video Out Available Resolution Output Status Composite 576i Always output. Scart 576i Scart output can be selected between RGB and

Component (YP HDMI 1080i/720p/576p The 576i resolution is not supported.

BPR

BPR) and HDMI output port

Composite.

) 1080i/720p/576p The 576i resolution is not supported.

Connecting Y our STB

Setting Up TV Operations with the Remote Control

Enter the manufacturer number into the remote control to control the TV with the remote control (see “Available TV Manufacturer Numbers” on pages 32~37).

1. Turn the TV on.

2. Point the remote control towards the TV.

3. Enter the TV manufacturer number by using the NUMERICAL keys while pressing the TV key.

E.g. For a Samsung TV, press 0, 0 and 1 in this order by using the NUMERICAL keys while

pressing the TV key.

4. When the TV is turned off or on, the configuration is finished.

TV functions that you can control with the remote control

Button key Function

TV STANDBY/ON INPUT SEL VOL+/CH /

MUTE 0~9

NNoottee : 1.

There is a model that can only be turned on by pressing the numeric key ‘0’ on

the remote control.

TV models of other manufacturer that can be controlled with the remote control

are limited, and some functions may not work.

If you replace the remote control batteries or enter a new manufacturer number,

the previously configured TV manufacturer number is deleted.

When a connected device is an integrated TV model (VCR, DVDP), take care when using the remote control because it may operate both of them simultaneously.

If the configuration number does not work, try another number.

Press to turn the TV on or off. Press to select an external input source for the TV. Press to adjust the TV volume / Exclusive to the TV Press to select a TV channel. Press to mute the TV sound. Press to select TV channel.

NNoottee : Initial value is YP

BPR (1080i resolution) mode.

GB-10

DIGITAL CABLE RECEIVER

GB-11

DCB-H360R

DESCRIPTION

Front Panel

HIGH DEFINITION CABLE RECEIVER DCB-H360R

GUIDE

1. /I Turns the receiver operating or standby mode.

2. HDTV Displays the broadcasting status. When the STB detects a

HD Broadcasting signal, the HDTV logo lights.

3. Display Window Displays information about digital HDTV receiver.

4. GUIDE Press to display the on-screen Electronic Program Guide (EPG)

5. MENU Displays the main menu.

6. OK Selects highlighted items on Guide and Menu screens.

7. These arrow keys navigate in the on screen guide and menu

< >

system.

8. Card Slot Slot for Irdeto Smartcard.

9. EXIT Clears on-screen displays and returns to TV program viewing.

EXIT

Rear Panel

VIDEO OUT

AUDIO OUT

COMPONENT

VIDEO OUT

ANT.IN

RF OUT

245

AV2

(EXT)

DIGITAL

AV1

(TV)

HDMI OUT

AUDIO OUT

(OPTICAL)

89 11

1. ANT.IN This port is connected to your cable system via a coaxial cable.

2. RF OUT Connects a TV or other receiver via a coaxial cable.

3. VIDEO OUT Connect to a TV, monitor or other external display device through the

Analog Video IN port.

4. AUDIO OUT Connect to a TV, audio receiver or other external device through the analog Audio IN port.

5. COMP. VIDEO OUT Connect to a TV, monitor or other external display device through the Component Video IN (YP

BPR). At this time, the VIDEO OUTPUT key

on the remote control has to be YPBPR mode.

6. AV1 (TV) This is used to connect to your TV.

7. AV2 (EXT) This is used to connect to your VCR, DVD or other receiver.

8. HDMI Out Use the HDMI cable to connect this jack on your television for the best

quality picture.

POWER

OFF

GB-12

9. DIGITAL AUDIO Output for connection to a digital amplifier.

10. POWER SWITCH This is used to supply(ON) or interupt (OFF) the power.

11. POWER CORD Connect to the wall outlet of AC 100-240V, 50/60Hz.

DIGITAL CABLE RECEIVER

GB-13

DCB-H360R

18 19

22 23

DCB-H360R

Remote Control Unit

DESCRIPTION

TV (for TV exclusive use)

Switches the remote control mode to TV mode.

STB

Switches the remote control mode to receiver mode.

3. STANDBY/ON

Turns the receiver operating or standby mode.

4. 0 ~ 9 NUMERICAL keys

Press the number keys to tune to a channel or to enter numbers on menu screens.

5. FAV. CH

Use the key to switch between favorite lists.

6. AL T

Press once to select the soundtrack list and twice to select video track list.

7. FREEZE

Press once to hold the picture, twice to release.

8. AUDIO Change the audio to the left, right or both channel.

9. CH. LIST

The scanned channel list appears.

10.Vol+ /Vol-

Adjust the volume level

11. MENU Press to display the on-screen menus.

12. ¦ These keys are for moving the highlight bar for selecting options on the menu.

13. GUIDE

Press to display the on-screen Electronic Program Guide (EPG).

14. P.SIZE

Press to change the screen format according to

the screen aspect ratio and the input signal format.

15. COLOR (RED, GREEN, YELLOW, BLUE)

Use according to the instructions on the screen when using a menu or guide screen.

DESCRIPTION

. RESOLUTION

Selects the output resolution format between 1080i, 720p, and 576p (576i) according to the

video input of the TV or monitor.

17. VIDEO OUPUT

Selects Video Output format between RGB and YP video input of TV or monitor

18. TV STANDBY/ON

Turns the TV operating or standby mode.(for TV exclusive use)

19. INPUT SEL

Press to select the input source in the TV (for TV exclusive use)

20. PRE. CH

Turn to the previous channel.

21. SUBTITLE

Displays the subtitle on the screen.

22. TEXT

Displays the teletext OSD mode on the screen.

23. TIMER

This is used to reserve a program by EPG.

24. TV/RADIO

Toggles between the TV channel and Radio channel.

25. CH /

Press to change the channel

26. RETURN

Press to return to the previous menu.

27. MUTE

Mutes the audio

28. OK

Press to confirm and save any data to the receiver in the menu system

29. INFO

Displays the program information in the screen. Press it once and basic information appears.Press it twice and detailed information appears in the text box.

30. EXIT

Clears on-screen displays and return to program viewing.

BPR according to the

NNoottee : When inserting batteries,

make sure that the polarity(+/-) is correct.

GB-14

DIGITAL CABLE RECEIVER

GB-15

DCB-H360R

BASIC FUNCTIONS

1. Display Screen

Before you can view the television program, you must perform the installation. Therefore you will see only menu images at first. After the television channels have been programmed, you will see the following picture(banner) each time you switch channels:

! Parental Rating. @ Favorite Channel. # Locked Channel. $ Scramble Channel. % Teletext

● Press the INFO key in view mode.

● Select the channel by pressing NUMERICAL 0-9 or

^ Subtitle. & Soundtrack. * Mail. ( Announcement. ) Dolby Digital.



to move to TV or Radio channel

You will also see this picture each time you change the channels. When you press the TV/RADIO key on the remote control. TV and Radio program are toggled.

1 HD/SD 2 16:9/4:3 3 Signal Status.

keys and select the TV/RADIO key

2. Volume Control

To control the volume level :

● Press

● Press the MUTE key to turn to silence mode.

● Press the MUTE key again or

NNoottee

the VOL- or VOL+

keys to adjust the volume level.

VOL- / VOL+

keys in order to cancel the mute function.

: HDMI sound is controlled by TV, not HD receiver.

3. Select Soundtrack

● Press the ALT key to see the soundtrack list.

● Press the

● The soundtrack service is not provided for every channel

and depends on the conditions the operator is in.



and OK key to select one.

Detailed program information

● Press the INFO key twice while you are viewing a program

First you will see the banner described above. After the INFO key is pressed in the second time, detailed information for current program can be displayed on another banner, if there is more information. When this information is more than one page, YELLOW and BLUE keys can be used for scroll up and down.

NNoottee

: This service depends on service provider.

GB-16

DIGITAL CABLE RECEIVER

4. Select Videotrack

● Press the ALT key twice to see the videotrack list.

● Press the

● The videotrack service is not provided for every channel

and depends on the conditions the operator is in.

NNoottee : When you select AUTO in the selection window,



and OK key to select one.

operation will follow system setting of main menu.

GB-17

DCB-H360R

BASIC FUNCTIONS

5. Channel List

● Press the CH LIST key while you are viewing a program.

● Select list by pressing the TV/RADIO key.

The icon behind the channel name symbolises scrambled channel, and the icon behind the channel name shows locked channel.

● Select the channel by pressing the

control.

● Press the OK key to watch that channel.

The colour key corresponds the following service list.

● YELLOW key : Favorites

● RED key : Alphabetical

● Press the (Page Up/Dn) keys to move to next or previous page.



keys on the remote

BASIC FUNCTIONS

6. Guide (EPG) Menu

EPG-Electronic Program Guide

The electronic program guide gives you information for the channels.

NNoottee

: 1. This service depends on service provider.

2. After receiver recognized the GMT-time from the signal which takes few seconds, it can display correct EPG information.

● Press the GUIDE key while you are viewing a program.

● RED key is for moving back to the previous date.

● GREEN key is for moving to the next coming date.

● YELLOW key can be used for scroll up, if there is more information than one page.

● BLUE key can be used for scroll down, if there is more information than one page.

● Press the EXIT key to exit.

5.1 Favorite Channel List

● Press the YELLOW key on the remote control to select the

group of favorite channel list.

● Press the YELLOW key to switch between favorite channel list

and channel list.

● Use the



keys to select a favorite group or a channel that

you want.

● Press the (Page Up/Dn) keys to move to next or previous page.

● Press the EXIT key to exit

5.2 Alphabetical Channel LIst

● Press the RED key on the remote control to select the

Alphabetical channel list.

● Press the RED key to switch between alphabetical channel list

and channel list.

Time interval can be adjusted by press keys as followings on EPG screen: 1 key: 1 hour and 30 minutes 2 key: 30 minutes 3 key: 15 minutes With the TV/RADIO key you can browse among the various programs lists.

● Select the channel by pressing the

● When the TIMER key on the remote control is pressed in the EPG screen, if the current channel



keys and press the OK key to watch this channel.

involves an event, timer is set immediately and the set timer is indicated on the EPG screen. Aprogram that has been set in this way is indicated on Timer Setting.

● Use the



keys to select a Alphabetical group or a channel

that you want.

● Press the EXIT key to exit.

GB-18

DIGITAL CABLE RECEIVER

GB-19

DCB-H360R

BASIC FUNCTIONS

7. Teletext OSD

When the current broadcasting program provides Teletext, press the TEXT key once to see the current language list for Teletext in order to get teletext in OSD regardless of TV type.

icon on the banner shows that Teletext is available on this event(program). Even is displayed on the banner, Teletext may not be available due to broadcasting.

● Press the EXIT key to exit.

NNoottee :

When the connected TV provides the Teletext

feature, this function is not supported.

The HD receiver does not support the Teletext

VBI function.

BASIC FUNCTIONS

9. Audio Mode

You can choose a mode among left, right or stereo using the AUDIO key.

To change the audio mode:

● Press the AUDIO key to select the left, right or stereo.

When the teletext application is active following keys can be used:

● NUMERICAL keys: 0.....9 are used to change main page.

Then in the left upper corner will be visible number of the main page. If the broadcasting program provides this page after the moment (usually about 20s), this page will be visible.

●



keys are used to change main page , just (+1) for key and (-1) for key.

● ¦ keys are used to change Next/Previous subpage number.

Sometimes broadcaster send one or more subpages on one main page. To change sub-page number just press ¦ or  key, if subpages will be exist in STB memory then next/previous subpage will be displayed.

8. Subtitle

When the current broadcasting program provides subtitle, press the SUBTITLE key to see the current subtitle language list. If subtitle is available on current program, is displayed on the banner .

To change the subtitle language:

● Press the SUBTITLE key once to see the subtitle language

List.

● Use the

● Press the OK key and then the subtitle language you want is

displayed.



keys to select a subtitle language you want.

NNoottee : When you select AUTO in the selection window,

operation will follow system setting of main menu.

GB-20

DIGITAL CABLE RECEIVER

GB-21

DCB-H360R

OPERATING THE RECEIVER

Main Menu

After installing your cable system and STB with appropriate connectors.

● Plug in the AC main power and switch on the receiver.

● Press the MENU key to bring up the main menu.

The following on screen display will appear:

The sub menu topics will be displayed. For the sub-menus Installation, Channel , System, Mailbox and Irdeto

Before you begin with the “Installation” menu, you should check in the 3th menu “System” whether all the information are applicable for you.

1. Installation

The menu provides settings for customizing, adding new services and displaying the status of the receiver.

● Select “Installation” in the main menu to select the

sub menu.

● Enter the PIN Code.

If you have not entered your own PIN Code then the PIN Code 0000 applies, which was set at the factory.

1.1 Manual Scanning

To tune-in new channels, the STB has been provided with “Manual Scanning” where the channel data can be entered by the user. After selecting the “Manual Scanning” from the Installation Menu, the following screen will be displayed:

● Input the frequency of the channel you want to find.

● Input the Network ID of the channel you want to find.

Ask your cable operator.

● Select the Modulation of the channel you want to find.

You can select the value of 16, 32, 64, 128 and 256.

● Input the symbol rate of channel you want to find.

● After select option, press the OK key to start the scan

process.

● Press the EXIT key to exit the menu .

NNoottee

: When you see “NOT COMPLETE CHANNEL”, please scan again with following

instuction of service provider.

1.2 Parental Control

Parental rating protects your children from adult content. This option is set in Installation Parental Control menu.

● Use the ¦keys to select age for your youngest child

then press the OK key to save this setting.

● All services which age grade is greater than set will be

blocked and request to enter the PIN Code.

GB-22

● If you want blocked all services, select “ALL BLOCKED”.

● By default, all services are “UNBLOCKED”.

Please enter the PIN Code.

● This banner is shown if service which age grade is greater than

set in Parental Control menu. Enter four digits PIN Code to hide this banner and show service content. Factory PIN Code is 0000, and you can change it in Change PIN Code menu.

● Press the EXIT key to exit the menu.

DIGITAL CABLE RECEIVER

GB-23

DCB-H360R

OPERATING THE RECEIVER

1.3 Reset to Factory Defaults

This is to recover the Factory set values in case the user has encountered some problems after changing any values of channel data and others which may be in error.

The screen display will be as follows:

At the request window, if you press the OK key, the receiver will be reset to factory default settings automatically.

NNoottee

: This causes your previous settings to be deleted!

All settings and information including channel data will

be deleted.

● Press the EXIT key to exit the menu .

1.4 Software Update

This option is enabled only if your cable provider sends software for your STB. To upgrade the software, place the cursor on Installation  Software Update menu and press the OK key. If new software is available, banner “Start Software Updating Process ?” will be displayed. There is also information about estimated time of software download. Press the OK key to confirm and start Software Updating process. If there is newest software on your STB “You don’t need to update software !” will be displayed.

OPERATING THE RECEIVER

2.2 Favorite Channels

You can immediately register the present channel to the desired Favorite Group. In addition, you can register a channel to multiple favorite groups.

● Select the desired Favorite Group(FAV1~FAV4) using the

FAV.CH key.

● Select the desired channel list using the  or numeric keys

at the TV or RADIO list window.

● Press the RED key and then register the selected

channel at the Favorite Group.

● Then press the OK key for confirmation.

You can change TV list or Radio list by the TV/RADIO key and change favorite list by the FAV.CH key.

● When you press the TV/RADIO key, TV list and Radio list are toggled.

● Press the FAV.CH key to select another favorite list.

● Press the EXIT key to exit the menu.

To delete channels from Favorite Group:

● Select a channel list to delete with the  keys.

NNoottee

: STB automatically reboots for software upgrading process. During the upgrading

process, TV screen will remain blank for approximately 10 minutes. Window display at the STB front panel will show the progress. Service will be resumed automatically after the upgrade is completed.

● Press the EXIT key to exit the menu.

2. Channel

The “Channel” menu has three functions: Saving changes on channel list by select Update List and it provides making four favourite lists and set channel lock, as you want.

● Enter the PIN Code.

If you have not entered your own PIN Code, 0000 applies which was set at the factory.

2.1 Update List

When some new channels will be transmitted to your cable network, these channels would be shown on channel list green colored. To save these channels, use Channel

List.



Update

● Press the RED key to delete the selected channel from the favorite channels.

● Press the EXIT key to exit the menu.

NNoottee

: One favorite list can contain max 200 channels.

2.3 Set Channel Lock

● Select the TV or RADIO channel window by pressing the

¦keys.

● Focus the channel by pressing the keys.

● Select the channel lock by pressing the RED key.

● Press the OK key for confirmation.

This will lock the channel. Whenever you need to view the channel, you will have to enter the PIN Code at the request window.

To cancel the lock:

● Press the RED key again in order to cancel the lock.

● Press the EXIT key to exit the menu .

GB-24

DIGITAL CABLE RECEIVER

GB-25

DCB-H360R

OPERATING THE RECEIVER

3. System

This option enables you to change the system settings as your requirements.

3.1 Language Selection

The “Language Selection” option allows the user to select the desired language of the OSD, Soundtrack, Teletext, Subtitle or EPG. However, these languages for Soundtrack, Teletext, Subtitle and EPG depend on broadcasting. For example, even the language for Subtitle can be selected, it may not be supported because of no Subtitle on the program.

● There are 3 OSD languages available and 37 languages

supported for soundtracks, subtitles,Teletext, and EPG.

● To select the desired language menu, press the

change language and press the OK key.

¦

keys to

OPERATING THE RECEIVER

3.2 OSD Settings

You can set the transparency of OSD, subtitle and Teletext, banner display time and OSD Position.

● Select OSD Transparency level.

The OSD Transparency level from 0 to 100%. Setting is made with the numeric keys,

¦

keys : Setting in increment of 1%.

CH+/CH- keys : Setting in increment of 10%.

● Select Subtitle Transparency level.

The OSD Transparency level from 0 to 100%. Setting is made with the numeric keys,

¦

keys : Setting in increment of 1%.

CH+/CH- keys : Setting in increment of 10%.

● Select Teletext Transparency level.

The OSD Transparency level from 0 to 100%. Setting is made with the numeric keys,

¦

keys : Setting in increment of 1%.

CH+/CH- keys : Setting in increment of 10%.

¦

or CH+/CH- keys .

¦

or CH+/CH- keys .

¦

or CH+/CH- keys .

● The soundtracks, subtitle, Teletext, and EPG will vary according

to the selected language.

● Press the EXIT key to exit the menu .

GB-26

● Set the display duration of the information(banner) box displayed in the screen.

The time ranges from 0.5 to 60.0 seconds. Setting is made with the numeric keys,

¦

keys : Adjusting in increment of 0.5sec.

CH+/CH- keys : Adjusting in increment of 1 sec.

NNoottee

: This setting does not apply to info banner and info window.

DIGITAL CABLE RECEIVER

¦

keys or CH+/CH- keys.

GB-27

DCB-H360R

OPERATING THE RECEIVER

OSD Position

● Place the cursor on the position you want, and press the

¦or

keys until the screen moves to the position you want. The screen will move to the position you want.

● Press the EXIT key to exit the menu .

3.3 Media Settings

You can set the various media settings you want. Place the cursor on this sub menu and press OK.

● Press the

the

● Press the OK key to confirm.

Screen Format

● Select the Screen Format according to your TV : STANDARD 4:3 or WIDE SCREEN 16:9

ratio type.4:3 Video aspect ratio: PAN&SCAN, Full Screen 14:9 LB (Letter Box), 16:9 LB

● When selecting 16:9 for the screen format, you can select an aspect ratio of 4:3 for a movie.

(However, the 16:9 video menu is not available in this aspect ratio). 16:9 Video aspect ratio: Standard, Wide

● When selecting 4:3 for the screen format, you can select an aspect ratio of 16:9 for a movie.

(However, the 4:3 video menu is not available in this aspect ratio).

● Select Video Color Bar: Black or Grey.

- Warning!

Do not display the video color bar in black for extended periods of time as you may experience temporary or permanent image burn. See also the precaution instructions regarding your display device.

● Select the Video Signal Type :

Composite + Component, Composite + RGB

● Select the Dolby Digital Auto Select : On or Off.

On : Outputs the Dolby Digital signal first. Off : Outputs other audio formats first.

● Select the Digital Out : Dolby Digital or PCM.

Dolby Digital : When Dolby Digital Auto Selected is on, outputs the Dolby Digital signal first. PCM : When Dolby Digital Auto Selected is on, outputs the PCM signal first.

● Select the Subtitle Auto Select : On, Hearing Impaired or off

● Press the EXIT key to exit the menu .

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.



keys to move the sub items and press

¦

keys to select the option.

OPERATING THE RECEIVER

3.4 Change PIN Code

To change the PIN Code, select the fourth option “Change PIN Code”.

This will take you to the following menu: In this option, you need to enter the current PIN Code at the

first cursor, and at the second cursor enter the desired PIN Code. To confirm, you need to enter the new PIN Code again.

Please remember the PIN Code should be a 4 digit numerical value.

THE FACTORY PRESET PIN Code : 0 0 0 0.

● Press the EXIT key to exit the menu .

3.5 Timer Settings

1) Guard Band Time

Guard-Band time is a function to ensure, that whole event will fit in set time boundaries. 1 minute of Guard-Band Time means that STB will start this timer operation 1 minute before set time and end 1 minute after set time.

2) Timer 15 timers are supported including timer(s) from EPG.

● Select the timer number on ‘Timer’ using the

● Press the

¦

keys to choose event repetition you want to reserve : Daily, Every Sunday, Every Monday, Every Tuesday, Every Wednesday, Every Thursday, Every Friday, Every Saturday and Once. If the timer is set from EPG screen, EPG is displayed on ‘Event Repetition’.

● Press the Numerical (0~9) keys to set the time you want and press the

choose a switch time you want to reserve. If set time on ‘Switch-on Time’is same as one on ’Switch-off Time’, this timer works for 24 hours.

● Select TV program to set the event program by pressing the

When you press the TV/RADIO key, TV program and Radio program are toggled.

● Even you can set timers on Daily and Every Monday or Every Sunday, etc.

The priority has the repetition event which is less. For example, when you set timers onOnce

and daily, ‘Once’ will work in stead of ‘Daily’ at that day. If the timer is running, ‘Running’ message with a timer number is displayed on ‘Timer’.

● Press the EXIT key to exit the menu.

¦

keys from 1 to 15.

¦

keys.



keys to

GB-28

DIGITAL CABLE RECEIVER

GB-29

DCB-H360R

OPERATING THE RECEIVER

3.6 System Information

If you have to contact your service provider or a service center they might ask for information available from this menu. Place the cursor on this sub menu and press the OK key. The following will be the on-screen display.

● Press the EXIT key to exit the menu.

OPERATING THE RECEIVER

5. Irdeto Menu

The menu provides the information of the smartcard and the STB. Press the OK key to enter the sub menu.

5.1 CA Status

You can see the CA status (Smart Card EMM/ECM information).

● Press the EXIT key to exit the menu.

4. Mail Box

You can read the message sent to the individual decoders. We can save the maximum 10 mail messages.

● Press the EXIT key to exit the menu.

5.2 IRD Status

You can see the IRD status (technical information about the IRD, CA, Smart Card and software loaded into it).

● Press the EXIT key to exit the menu.

5.3 Loader Status

You can see the information about the IRD, and software loaded into it.

● Press the EXIT key to exit the menu.

GB-30

DIGITAL CABLE RECEIVER

GB-31

DCB-H360R

1. TV key + 3-Digit User Code

2. TV Operating keys: TV STANDBY/ON, 0~9, CH

Maker (BRAND) NAME CODE NUMBER (3DIGIT) LIST

SAMSUNG 001 002 003 004 005 006 007 008 009

A.R. SYSTEMS 049 152 ACCENT 049 152 ACEC 112 ACURA 195 ADMIRAL 065 076 163 171 190 307 324 369 466

ADYSON 379 AGASHI 076 379 AGEF 324 AIKO 049 076 102 141 152 172 195 225 379 AIWA 377 459 AKAI 049 050 055 066 076 102 107 123 139

AKIBA 049 123 152 380 378 AKITO 049 106 152 AKURA 049 076 123 195 378 426 470 ALARON 042 379 ALBA 018 049 050 107 123 134 163 168 195

ALBIRAL 371 ALCYON 407 ALLORGAN 050 094 236 379 ALLSTAR 049 152 AMPLIVISION 113 379 421 425 AMSTRAD 012 049 076 123 131 152 172 195 225

ANAM 049 152 195 ANAM NATIONAL 049 152 ANGLO 076 195 ANITECH 049 076 152 195 407 ANSONIC 045 049 107 112 152 195 210 226 391

ARC EN CIEL 074 182 186 424 453 463 ARCAM 379 424 ARISTONA 049 050 065 079 112 152 160 ARTHUR MARTIN 107 127 136 139 153 307 425 ASA 020 065 078 080 091 146 171 197 307

ASBERG 049 152 407 ASORA 195 ASTRA 195 ASUKA 050 076 123 378 379 ATLANTIC 049 050 071 113 152 236 379 ATORI 195 AUCHAN 107 425 AUDIOSONIC 049 074 076 152 182 195 213 379 421 AUDIOTON 050 076 379 421 AUSIND 090 407 AUTOVOX 050 071 078 079 080 083 090 156 236

AWA 018 049 131 152 195 226 320 379 426 AYOMI 411

BAIRD 074 102 182 209 218 379 409 BANG & OLUFSEN 324 BARCO 107 371 480 BASIC LINE 049 107 123 195 226 378 BASTIDE 379

Available TV Manufacturer Numbers

, VOL+/-, INPUT SEL, MUTE

Maker (BRAND) NAME CODE NUMBER (3DIGIT) LIST

010 050 066 076 102 195 217 365 379 421

481

141 150 152 172 182 195 209 225 379 428 433 437 471 475

225 232 379 413 421 457

426 476

413 421

324 375 408 449

324 379 407 413 449 468 470 433

BAUR 049 107 150 152 172 247 249 357 414 BEKO 152 241 421 433 460

BEON 049 152 163 BEST 213 421 BESTAR 049 152 226 421 BINATONE 379 BLACK STAR 413 BLACKTRON 378 BLACKWAY 378 BLAUPUNKT 057 060 113 247 249 345 451 454 481 BLUE SKY 049 123 152 195 217 232 378 380 457 BLUE STAR 378 BONDSTEC 413 BOOTS 050 106 379 BPL 049 152 378 BRANDT 014 074 182 186 218 424 436 452 462 BRANDT ELECTRONIC 074 453 463 BRANDT ELECTRONIQUE 074 182 186 453 BRINKMANN 049 152 163 BRIONVEGA 049 065 083 152 167 172 324 356 476 BRITANNIA 379 BROTHER 076 BRUNS 065 324 BSR 094 107 110 139 168 BTC 123 BUSH 018 049 076 094 106 107 123 134 139

BUSH(UK) 107 168 CAPSONIC 049 076 152 380 CARREFOUR 018 177 CASCADE 049 064 152 195 CASIO 049 152 CATHAY 049 152 CCE 049 152 379 CENTURION 049 152 CENTURY 065 163 324 411 413 481 CGE 011 090 093 094 107 139 142 163 168

CIHAN 217 CIMLINE 123 134 195 CITY 195 CLARIVOX 049 125 163 CLATRONIC 045 049 076 113 123 152 195 225 379

CMS HIGHTEC 379 COMTEL 125 217 CONCORDE 195 CONDOR 045 049 050 113 152 163 195 210 378

CONTEC 018 131 195 320 379 CONTINENTALEDISON 014 074 182 186 232 424 453 462 463 COSMEL 195 213 CROSLEY 065 090 093 094 104 107 139 324 346

CROWN 049 152 163 170 195 209 232 407 421 CRYSTAL 477

CS ELECTRONICS 123 379 413 CTC 413 CTC CLATRONIC 045 CURTIS MATHES 126 190

454 470 475

142 172 193 195 209 217 225 226 232 307 378 379 457 458 470 480

346 348 369 407 413 421 480

407 413 421

379 413 421 467

348 407 413 469 481 470

Available TV Manufacturer Numbers

Maker (BRAND) NAME CODE NUMBER (3DIGIT) LIST

CURTIS MATHES 126 190 CYBERTRON 123 DAENYK 042 DAEWOO 049 123 152 193 195 226 379 456 464 DAINICHI 123 379 DANSAI 049 076 141 152 195 379 DANSETTE 426 DANTAX 421 DATSURA 209 DAWA 049 152 DAYTON 049 152 195 226 DE GRAAF 107 139 209 307 479 DECCA 049 102 106 120 217 DECCA(UK) 046 049 050 102 106 131 152 379 DEITRON 049 152 DENKO 076 DENON 126 DERWENT 105 DESMET 049 113 152 DIGATRON 049 DIGILINE 049 152 DIXI 049 152 195 379 413 DORIC 104 105 DREAN 049 152 DTS 195 DUAL 049 050 107 139 152 156 168 182 243

DUAL TEC 040 050 168 195 379 DUMONT 045 065 080 102 139 146 324 375 379

DUMONT-FINLUX 020 045 078 091 104 DUX 049 112 152 DYNATRON 049 152 ELBE 049 107 123 152 172 210 243 369 391

ELBIT 217 ELCIT 045 046 062 065 104 107 150 168 324

ELECTA 076 378 ELECTRO TECH 195 ELEKTA 076 378 ELG 049 152 ELIN 020 049 107 139 152 172 195 379 470

ELITE 049 123 152 467 ELMAN 045 168 ELTA 195 076 379 EMERSON 012 042 049 065 113 152 225 324 378

ERRES 049 112 152 ESC 049 152 ETRON 049 107 139 152 195 EURO-FEEL 076 EUROMAN 049 076 152 379 421 EUROPA 049 152 EUROPHON 045 046 049 050 068 107 120 152 168

EXPERT 071 107 236 425 EXQUISIT 049 152 413 FAMILY LIFE 049 152 FENNER 152 195 226 FERGUSON 049 050 074 076 080 082 102 103 182

FIDELITY 049 050 076 107 152 225 307 379 475 FILSAI 050 379 FINLANDIA 033 139 172 197 209 307 375 470 474 FINLUX 020 042 045 049 078 080 090 091 102

379 414 417 424 468 470

449 469

411 421 435

413

479

413 475 481

379 413

218 247 409 411 436 452 472

104 107 139 146 152 163 197 210 324 375 379 407 408 428 429 437 449 469

Maker (BRAND) NAME CODE NUMBER (3DIGIT) LIST

FIRST LINE 045 049 094 102 107 134 139 152 191 FISHER 018 041 050 065 069 102 104 107 139

FLINT 049 102 123 152 380 FNR 045 FORMENTI 049 090 107 113 139 307 324 379 407

FORMENTI-PHOENIX 050 104 113 307 FORTRESS 190 324 FRABA 049 152 421 FRIAC 045 049 152 195 FRONTECH 066 076 139 195 307 379 413 466 470

FUJITSU 042 045 071 102 107 195 236 379 FUJITSU GENERAL 195 379 FUNAI 042 076 094 GALAXI 045 049 152 GALAXIS 045 049 152 163 421 GBC 104 107 139 168 195 226 480 GE 074 182 218 378 GEANT CASINO 107 425 GEC 049 102 104 107 120 152 171 172 307

GEC(UK) 046 050 102 107 150 162 GELOSO 062 104 107 139 168 171 195 226 307

GENERAL 064 074 182 GENERAL TECHNIC 195 GENEXXA 049 123 152 307 426 466 GOLDHAND 379 GOLDLINE 213 GOLDSTAR(LG) 049 050 055 107 139 152 168 172 182

GOODMANS 018 042 049 076 102 134 139 141 152

GORENJE 421 GPM 123 GRADIENTE 049 152 170 177 GRAETZ 049 090 104 136 139 152 153 162 171

GRANADA 013 018 033 041 049 102 104 105 112

GRANADA(UK) 046 050 090 107 139 162 307 GRANDIN 049 107 113 123 152 195 378 380 425

GRONIC 045 379 GRUNDIG 049 080 090 152 232 247 249 407 454

HALIFAX 076 379 HAMPTON 379 HANIMEX 094 HANSEATIC 018 049 050 094 104 107 113 152 172

HANTAREX 045 046 049 152 195 HANTOR 049 152 HARLEY DAVIDSON 042 HARWOOD 049 152 195 426 HAUPPAUGE 049 152 HAVERMY 190 HCM 049 076 123 152 163 195 378 379 426 HEMA 195 379 HEMMERMANN 150 470 HIFIVOX 074 182 186 424 453 463

195 209 210 226 379 411 413 457 470 156 172 209 320 324 379 408 414 421

470

467 469 480 481

477

379 470

413 469 481

195 219 379 413 414 421 460 182 193 195 218 225 226 232 379 428

450 456 464

172 198 225 307 466 469 475 120 152 171 172 198 209 218 238 241

307 379 407 425 470 471 472 474

435

455

195 241 324 378 379 391 421 455 467 470 475

DCB-H360R

GB-32

DIGITAL CABLE RECEIVER

GB-33

DCB-H360R

Available TV Manufacturer Numbers

Maker (BRAND) NAME CODE NUMBER (3DIGIT) LIST

HIGASHI 050 HIGHLINE 049 076 152 HIKONA 123 HINARI 012 018 042 049 066 094 107 123 134

HISAWA 123 378 380 425 HIT 324 HITACHI 018 020 033 049 050 074 086 099 102

HITACHI FUJIAN 013 HITSU 123 195 380 HORNYPHON 049 112 152 HOSHAI 123 380 HUANYU 193 226 379 HYGASHI 379 HYPER 050 168 195 379 413 HYPERSONIC 172 HYPSON 049 076 152 217 378 379 380 425 IBERIA 049 152 ICE 049 076 123 152 195 225 379 ICES 123 379 IMPERIAL 011 049 090 093 094 107 142 152 163

INDIANA 049 152 INGELEN 090 104 136 139 153 162 171 198 232

INGERSOLL 195 INNO HIT 046 049 050 066 102 123 152 195 217

INNOVATION 049 152 INTERACTIVE 210 INTERBUY 076 195 413 INTERFUNK 049 065 067 074 090 104 107 112 139

INTERNAL 049 152 INTERVISION 045 049 055 076 107 123 152 225 232

IR 346 IRRADIO 049 066 090 123 152 195 407 413 ISUKAI 049 123 152 378 ITC 379 480 ITS 049 076 123 152 225 378 379 ITT 042 090 107 134 139 150 162 171 172

ITT-NOKIA 042 090 104 107 134 136 139 150 153

ITV 076 049 152 413 JEAN 018 JEC 141 JET POINT 365 JVC 018 103 123 170 182 225 409 433 439

KAISUI 049 050 123 152 195 378 379 380 KAMOSONIC 050 KAMP 379 KAPSCH 071 107 172 236 466 KARCHER 020 045 049 050 068 076 107 152 195

KATHREIN 455 KAWASHO 379 KB ARISTOCRAT 107

139 195 209 232 307

104 107 110 126 127 139 150 152 162 168 171 182 186 218 238 307 379 466 469 470 472 479

168 307 346 348 369 407 413 421 470 480

435 466

379 407 413

150 152 153 172 182 307 324 413 421 453 463 466 475

378 379 380 413 421

193 197 198 209 307 375 428 466 469 470 471 475 479

162 171 172 193 197 198 209 307 375 470 428 433 435 437

465

217 378 421 435

Maker (BRAND) NAME CODE NUMBER (3DIGIT) LIST

KENDO 045 049 055 134 152 172 210 413 421 KENNEDY 071 079 104 107 139 236 369 480

KINGSLEY 379 KLARMAX 371 KNEISSEL 049 152 210 243 369 391 411 421 435 KOLSTER 045 049 152 470 KONKA 049 123 152 225 KONTAKT 232 KORPEL 049 152 KORTING 065 094 113 324 421 KOSMOS 049 152 KOTRON 076 426 KOYODA 195 KRAKING 411 KRIESLER 050 065 079 112 152 160 KTV 050 379 KURO 445 KYOSHU 076 163 426 KYOTO 107 LECSON 049 152 LEMAIR 210 LENCO 049 107 152 195 226 LENOIR 050 195 LESA 413 LEYCO 049 076 094 102 152 LIESENK & TTER 049 112 152 345 LIFE 440 441 443 444 LIFETEC 049 076 123 152 195 226 440 441 443

LLOYD_S 195 LOEWE 035 049 089 120 152 324 391 421 LOEWE OPTA 035 046 049 065 120 144 152 213 324 LOGIK 131 225 LOGIX 195 LUMA 071 107 110 152 171 172 195 210 226

LUMATRON 049 076 107 152 172 236 379 LUX MAY 049 152 195 LUXOR 042 050 090 107 127 139 150 172 197

LYCO 076 MAAZ 371 MADISON 049 152 MAGNADYNE 045 046 062 065 104 107 120 139 150

MAGNAFON 045 046 050 068 090 120 379 407 481 MAGNAVOX 018 042 049 152 MAGNUM 440 441 443 444 MANDOR 076 MANESTH 076 094 113 134 141 152 379 467 MANHATTAN 049 195 MARANTZ 049 152 455 MARELLI 324 MARK 049 152 195 226 379 MASUDA 123 195 225 MATSUI 012 018 041 049 050 094 100 102 106

MAXIMAL 139 MAXWELL 371 MEDIATOR 049 112 152 MEDION 049 152 195 217 457 MEGAS 435 MEGATRON 126 MELECTRONIC 020 049 074 152 182 193 195 197 210

MELVOX 425

435 476

444

236 307

209 307 375 428 429 470 472 473 475

168 324 413 469

107 131 134 141 150 152 171 195 209 218 225 232 247 307 379 380 470

226 375 379 408 413 428 429 466 470

Available TV Manufacturer Numbers

Maker (BRAND) NAME CODE NUMBER (3DIGIT) LIST Maker (BRAND) NAME CODE NUMBER (3DIGIT) LIST

MELVOX 425 MEMOREX 099 195 217 MEMPHIS 102 125 195 213 MERCURY 049 152 195 METZ 049 065 067 070 092 247 324 412 420

MICROMAXX 049 152 195 MICROSTAR 440 441 443 444 MINERVA 080 090 232 247 249 407 454 MINOKA 049 152 426 470 MITSUBISHI 013 018 049 065 105 131 152 157 190

MIVAR 046 050 058 072 081 090 120 379 391 MONACO 195

MORGAN_S 049 152 MOTION 407 MOTOROLA 190 MTC 152 379 421 470 MTEC 106 MULTISTANDARD 045 MULTITEC 049 152 195 MULTITECH 045 046 049 050 120 152 195 379 407

MURPHY 102 104 105 107 171 307 379 MURPHY(UK) 162 MUSIKLAND 123 MYRYAD 455 NAD 172 209 475 NAIKO 049 152 NAKIMURA 049 152 226 NAONIS 040 071 079 110 171 NAT 085 151 NATIONAL 033 085 104 NEC 018 049 113 131 152 177 195 226 379

NECKERMANN 011 049 050 065 107 139 152 163 210

NEDIATOR 152 NEI 049 125 152 225 477 NESCO 042 413 NETSAT 049 152 NETWORK 213 NEUFUNK 049 152 195 435 NEW TECH 049 050 152 182 195 379 NEW WORLD 123 NICAMAGIC 379 NIKKAI 018 049 076 102 123 125 139 141 152

NOBLEX 049 076 152 NOBLIKO 045 050 080 090 379 407 NOGAMATIC 074 182 186 424 453 463 NOKIA 090 104 107 134 136 139 150 153 157

NORDMENDE 049 074 083 150 152 182 186 218 247 NOVATRONIC 020 049 152 226

OCEANIC 086 094 104 107 108 109 139 172 209 OCEANIC(F) 150

ODEON 076 OKANO 049 076 102 152 421 OMEGA 076 ONCEAS 050 ONWA 123 225 OPERA 049 152

454 481

247 324 454 407 414 421 434

413 421 470

380 247 249 307 324 357 379 413 421 455

470 481

195 213 379 066

162 171 172 193 197 198 209 226 307 375 428 429 433 437 465 470 475 478 479

307 424 453 463 469 481

425 466 469 475

OPTIMUS 099 OPTONICA 190 ORBIT 049 152 ORION 012 042 045 049 076 094 113 131 134

ORLINE 049 123 152 ORMENTI-PHOENIX 104 ORMOND 195 OSAKA 066 OSAKI 049 066 076 102 106 123 152 226 379

OSIO 049 152 OSO 123 OSUME 018 102 123 OTAKE 450 OTTO VERSAND 018 049 050 074 094 104 107 113 134

P.TACTRON 217 PAEL 050 379 PALLADIUM 049 107 152 163 210 247 324 357 379

PALSONIC 049 055 076 152 379 426 PANAMA 049 076 152 195 379 413 PANASONIC 016 049 099 104 107 139 151 152 172

PANAVISION 049 152 210 PATHE CINEMA 107 113 379 391 411 425 467 470 480

PATHE CINEMA(F) 050 168 PATHE MARCONI 014 074 182 186 424 453 462 463 PAUSA 195 PAUZA 195 PERDIO 049 102 107 113 152 467 PERFEKT 049 152 PERSHIN 425 PHILCO 011 016 049 065 090 093 094 104 107

PHILEX 471 PHILHARMONIC 379 PHILIPS 014 049 050 065 079 089 112 152 160

PHOENIX 049 050 102 104 107 113 152 324 379 PHONOLA 049 050 065 079 112 152 160 324 379

PILOT 049 152 PIONEER 049 074 152 172 182 209 218 307 421

PLANTRON 049 076 152 195 PLAYSONIC 379 POLICOM 074 POPPY 195 PORTLAND 226 POWERPOINT 232 PRANDONI-PRINCE 046 090 120 171 172 307 407 413 PRECISION 379 PREMIER 142 PRIMA 076 195 307 PRINCE 046 171 PRINZ 102 470 PROFEX 107 139 195 407 475 PROFI-TRONIC 045 049 152 PROLINE 049 102 112 191 366 436 PROSONIC 049 085 151 152 195 225 226 379 421

139 150 152 191 195 216 366 367 426 467

426

139 152 172 190 218 247 249 357 362 379 413 414 454 455 467 469 470 480 481

413 421 470

396 420 466 469 481

481

126 142 152 163 168 324 346 348 369 407 413 421 480 481

182 193 216 217 220 226 247 249 324 427 455 482

421

427 466

GB-34

DIGITAL CABLE RECEIVER

GB-35

DCB-H360R

Available TV Manufacturer Numbers

Maker (BRAND) NAME CODE NUMBER (3DIGIT) LIST Maker (BRAND) NAME CODE NUMBER (3DIGIT) LIST

PROTECH 045 049 076 125 139 152 163 195 379 PROVISION 049 152

PYE 050 065 079 112 152 160 226 324 PYMI 049 112 152 195 226 324 QUADRA VISION 425 QUASAR 045 046 068 099 413 QUELLE 018 020 049 050 074 076 078 080 090

QUESTA 018 RADIALVA 049 074 107 123 152 RADIOLA 014 049 050 065 079 112 152 160 RADIOMARELLI 045 046 062 065 104 105 150 152 168

RADIONETTE 020 150 RADIOSHACK 049 152 RADIOTONE 049 076 152 163 195 421 426 RANK ARENA 018 RCA 190 218 436 RECOR 049 152 RECTILIGNE 049 152 REDIFFUSION 018 059 104 105 139 171 172 307 471

REDIFFUSION(UK) 150 162 REDSTAR 049 152 REFLEX 049 152 REOC 460 REVOX 049 152 421 REX 040 071 079 107 110 152 171 210 236

RFT 076 102 241 324 391 421 RHAPSODY 379 R-LINE 049 152 ROADSTAR 049 076 123 152 163 195 ROBOTRON 065 324 RODEX 049 152 ROWA 458 ROWSONIC 050 ROYALLUX 421 426 RTF 065 SABA 046 065 074 077 107 120 139 172 182

SACCS 411 SAGEM 378 380 435 SAISHO 012 050 076 107 131 134 195 307 379

SALORA 033 107 127 136 139 150 153 171 172 SAMBERS 045 046 068 090 120 407 481

SANDRA 379 SANELA 411 SANSUI 049 152 225 SANTON 195 SANYO 018 020 041 049 050 065 102 107 131

SAVE 049 152 SBR 049 112 152 SCHAUB LORENZ 090 104 136 139 153 162 171 198 307

SCHNEIDER 014 040 049 050 065 069 079 104 107

413 457 470 477 480

091 094 113 131 139 146 150 152 153 172 195 247 249 320 345 346 348 357 379 408 413 449 451 454 470 475 480 481

324 413

475

243 307 413 466

186 218 307 324 424 436 452 453 463 466 469 481

477 198 209 307 466 470 472 474 475 479

152 195 198 209 320 379 391 408 421 481

433 469 470 475 112 123 139 152 156 160 168 172 182

195 225 243 307 379 382 413 414 417 457 468 470

SCOTT 042 SEARS 042 SEG 018 045 049 050 076 107 152 172 195

SEI 012 045 049 094 107 139 152 236 324 SEI SINUDYNE 446

SELECO 040 071 079 107 110 152 171 172 210 SENCORA 195

SENTRA 123 139 141 195 SERINO 380 435 SHARP 018 094 170 190 320 362 SHORAI 042 094 SIAM 049 152 SIAREM 045 046 065 104 107 120 139 324 469

SIEMENS 018 049 066 113 152 247 249 307 320 SIERA 050 065 079 112 152 160

SIERRA 049 112 152 SIESTA 421 SILVA 049 152 379 SILVER 018 042 049 076 152 172 SINGER 045 049 065 104 152 195 324 369 413

SINUDYNE 012 045 065 094 104 107 134 139 150

SKANTIC 307 472 473 SKY 049 152 SKYWORTH 448 SOGERA 113 SOLAVOX 066 102 107 139 172 307 466 471 SONAWA 123 SONITRON 209 379 421 SONNECLAIR 049 152 SONOKO 049 050 076 152 195 378 379 SONOLOR 107 139 172 209 357 425 466 SONTEC 049 094 152 421 SONY 018 045 131 211 346 357 358 370 SOUND & VISION 045 123 226 SOUND WAVE 049 113 163 SOUNDESIGN 042 SPECTRA 195 SSANGYONG 195 STANDARD 049 050 113 123 152 195 226 379 STARLIGHT 049 076 107 152 195 STENWAY 123 378 STERN 040 071 079 107 110 152 171 236 243

STRATO 049 076 152 195 SUNKAI 049 094 123 134 152 191 232 367 380 SUNSTAR 049 152 195 225 SUNWOOD 049 152 195 SUPERLA 379 SUPERTECH 049 123 152 195 379 SUPRA 195 226 SUSUMU 123 218 SUTRON 195 SWISSLINE 413 SYDNEY 379 SYSLINE 049 SYTONG 379 TACTUS 106 TANDBERG 065 074 078 172 182 210 213 420 449 TANDY 050 102 123 190 307 379 413 466 TASHIKO 018 050 107 177 379 470 474

232 379 413 407 457 480 357 469 470 481

236 243 307 369 466 476

481 345 451 454 469 481

425 152 172 210 216 236 324 357 366 367

469 470 481

307 466

Available TV Manufacturer Numbers

Maker (BRAND) NAME CODE NUMBER (3DIGIT) LIST Maker (BRAND) NAME CODE NUMBER (3DIGIT) LIST

TATUNG 049 050 102 106 120 131 152 217 379 TCM 440 441 443 444 TEAC 049 076 152 163 195 217 378 380 426

TEC 040 050 064 168 195 213 218 243 379 TECH LINE 049 152 195

TECHICA 123 TECHNEMA 113 467 TECHNICS 099 TECHNOLACE 042 TEDELEX 379 TEIRON 195 TEKNIKA 042 TELEAVIA 014 074 182 186 218 424 453 462 463 TELECOR 049 107 123 152 379 TELEFUNKEN 049 064 074 082 152 182 186 187 218

TELEFUSION 049 152 TELEGAZI 049 076 107 123 152 TELEMEISTER 049 113 152 467 TELESONIC 049 152 TELESTAR 049 152 TELETECH 049 152 195 213 413 TELETON 018 067 071 107 236 379 470 TELEVIDEON 050 104 107 113 379 TELEVISO 425 TEMCO 094 TEMPEST 049 152 195 TENNESSEE 049 152 TENSAI 020 050 055 094 113 123 152 195 225

TESMET 439 TETUNG 046 TEVION 049 152 195 TEXET 050 123 195 226 379 THOMSON 014 024 049 064 074 134 152 182 186

THORN 049 102 103 106 141 152 218 226 346 THORN-FERGUSON 074 076 080 082 103 218 357 358 375

TOKAI 049 102 107 152 195 213 226 379 TOKYO 141 379 TOMASHI 123 378 TOSHIBA 018 045 128 141 369 379 TOWADA 045 379 470 480 TOYODA 195 TRAKTON 076 TRANS CONTINENS 046 049 152 171 307 379 TRANSONIC 049 152 380 458 TRANSTEC 379 TRIDENT 379 TRISTAR 123 TRIUMPH 012 046 049 128 152 197 375 UHER 049 069 071 080 090 113 152 163 226

ULTRA 409 ULTRAVOX 045 049 050 065 104 107 139 152 226

UNIC LINE 049 152 UNITED 049 152 UNIVERSUM 011 012 018 020 049 074 076 094 107

UNIVOX 049 107 152 213 324 411 UTAX 050 VEGAVOX 163

457 458 470 413 480

230 346 348 424 436 452 453 463

226 379 413 450 467

218 230 424 436 453 462 463 470 348 408 409 411 454 464 470 475

236 307 407 414 421 467

324 379 413 471

131 152 163 172 195 197 210 213 247 320 345 346 357 375 379 407 408 413 421 428 429 437 454 470 480

VESTEL 049 107 125 152 379 VEXA 152 195 VICTOR 170 VIDEO SYSTEM 049 152 VIDEOLOGIQUE 123 379 VIDEOSAT 413 447 VIDEOSYSTEM 049 152 VIDEOTECHNIC 113 226 379 VIDEOTON 107 472 VIDIKRON 045 VIDTECH 018 VIPER 213 VISIOLA 379 VISION 049 113 152 467 VISOREX 442 VISTAR 172 236 VOLTEC 074 VORTEC 152 VOXSON 049 065 090 152 163 171 307 324 407

WALTHAM 049 152 163 182 307 379 472 WATSON 049 107 113 123 152 195 247 467 WATT RADIO 045 050 068 104 107 139 150 379 470

WEGA 018 049 139 152 324 WEGA COLOR 065 088 WEGAVOX 195 WELTBLICK 113 152 WESTINGHOUSE 094 152 WESTON 168 WHARFEDALE 049 152 WHITE 045 WHITE WESTINGHOUSE 049 050 113 152 213 379 467 WINCO 426 WINDSTAR 378 XRYPTON 049 152 YAMISHI 049 123 152 378 379 380 YOKAN 049 152 YOKO 049 050 076 123 152 195 379 413 421

YORX 123 ZANUSSI 040 071 079 110 152 171 236 307 379 ZOPPAS 040 071 079 110 171 307

466

480

477

GB-36

DIGITAL CABLE RECEIVER

GB-37

DCB-H360R

TROUBLESHOOTING

Problem Possible cause Solution of the problem No display LED on Power cord not plugged in correctly Power cord plug in correctly

the front panel; No power supply

No pictures on the screen Receiver in Standby mode; Set receiver to “On”;

SCART,RCA or HDMI not connected Check connection; tightly to video input of television; Incorrect channel or video output Check channel and video input of TV selected on television: (TV instruction manual); Incorrect video output selection on HD Check video output on HD receiver Receiver (Refer to page 10)

No sound SCART or Audio connected incorrectly; Check connection;

Loudness level = 0; Increase loudness on television set

or HD receiver;

Muting active Press the MUTE key

Remote Control does not Incorrect Operation; Point remote control towards the operate directly receiver;

Batteries dead or inserted incorrectly Replace batteries or insert correctly Poor picture quality Signal strength too low Check all wire connections Menu screen does not Channel lists not installed; Scan channels. Please go to

disappear Installation menu; On-Screen Error Messages; Signal cable not connected or not tight Check connection

“Searching for signal”; “No signal”

On-Screen Error Messages; Smartcard (Depend on model) “Smartcard Failure” - not plugged in correctly; Check the smartcard; “Unknown smartcard” “Please insert Smartcard” - not plugged in Insert the smartcard

DISPOSAL

The device, packaging material (e.g. Styrofoam) and the batteries must never be disposed of with household refuse. Please obtain appropriate information about the regulations in your community , and dispose of all refuse in accordance with regulations at the separate locations provided.

TECHNICAL SPECIFICATIONS

Power supply

Type : SMPS Input voltage : AC 100-240V~, 50/60 Hz Fuse rating : 250 V/T1.6AH

Tuner & Demodulator

Input Frequency : 50.5~858 MHz Channel Bandwith 8 MHz DEMODULATION : QAM DVB-C SYMBOL RATE : MAX 7.252 Msps Constellation : 16, 32, 64, 128, 256 QAM CABLE OUT : RF LOOP-THROUGH OUTPUT for other

receiver or TV

Video decoder

System decoding : MPEG-2 ISO/IEC 13818-2 Profile@Level (MP@HL(HD), MP@ML(SD))

H.264 ISO/IEC 14496-10

(MP@L3, MP@L4, HP@L4 up to 30 Mbps) Resolution : 1080i, 720p, 576p, (576i) Video Output: SD output (2 SCART (AV1,AV2), Composite RCA)

HD output (Component (YPBPR), HDMI) Video Format 4:3(Normal) & 16:9 (Widescreen)

Audio Decoder

System decoding : MPEG Audio-1 ISO/IEC 11172-3

(Layer1, Layer2)

MPEG Audio-2 ISO/IEC 13818-3

Dolby Digital (AC-3) Audio mode : Mono, Dual stereo, Joint stereo Sampling Rate: 32kHz, 44.1kHz, 48kHz, 96kHz

Audio output : Analog output (L/R (RCA) 1 CH)

Digital output (S/PDIF(Optical))

GB-38

PHISICAL SPECIFICATION Size (W x D x H) 351 x 227 x 60 mm Weight (Net) 2.47Kg

DIGITAL CABLE RECEIVER

GB-39

+ 48 hidden pages