Page 1
COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ENG
REMOTE CONTROL
ON-SCREEN MENUS
ENJOY GAME
Page 2
2
ENG
Safety Instructions
The following illustrations represent the precautions to be taken when using and moving your television.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
Caution
CAUTION: TO PREVENT ELECTRICAL SHOCK, DO
NOT REMOVE REAR COVER, NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
CAUTION
Do NOT expose the television to
extreme temperature conditions
(below 5°C and above 35°C) or to
extreme humidity conditions (less
than 10% and more than 75%).
Do NOT expose the television to
direct sunlight.
Do NOT expose the television to
any liquids.
If the television is broken, do not
try to repair it yourself. Contact
qualified service personnel.
During a storm conditions
(especially when there is lightning)
unplug the television from the
mains socket and aerial.
If the remote control is not used for
a long period of time, remove the
batteries and store it in a cool, dry
place.
WARNING: TO PREVENT DAMAGE WHICH MAY
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
☛
The main voltage is indicated on the rear of
the TV set and the frequency is 50 or 60Hz.
The lightning flash and arrow head
within the triangle is a warning sign
alerting you of “dangerous voltage”
inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
!
➢
Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.
Mode System
CS PAL-B/G, D/K, I, SECAM-B/G,D/K, I,
NTSC4.43 (NTSC3.58; option)
CB PAL-B/G
CZ PAL-B/G, D/K, I, SECAM-B/G,D/K, I,
NTSC4.43
10%
H
5°
75%
35°
H
Page 3
3
ENG
PREPARING YOUR TELEVISION
Safety Instructions......................................................................................... 2
Caution .......................................................................................................... 2
Front Panel Controls...................................................................................... 4
Using the Buttons on the Front Panel............................................................ 5
Connection Panels ........................................................................................ 6
Infrared Remote Control................................................................................ 7
Inserting the Batteries in the Remote Control................................................ 8
Connecting the Aerial (or Cable Television Network).................................... 8
Switching Your Television On and Off........................................................... 9
Placing Your Television in Standby mode..................................................... 9
Plug & Play Feature....................................................................................... 10
Choosing Your Language.............................................................................. 11
SETTING UP THE CHANNELS
Storing the Channels Automatically (Turbo Store) ....................................... 12
Storing the Channels Manually...................................................................... 13
Skipping Unwanted Channels ....................................................................... 14
Fine tuning Channel Reception ..................................................................... 15
Sorting the Stored Channels ......................................................................... 16
Changing Channels....................................................................................... 17
Pre Channel .................................................................................................. 17
Channel Scan ............................................................................................... 17
Selecting a Channel Numbered Ten or Over ................................................ 17
USING THE TELEVISION
Changing the Picture Standard ..................................................................... 18
Selecting the Picture Format ......................................................................... 18
Adjusting the Picture Settings ....................................................................... 19
Changing the Sound Standard ...................................................................... 20
Adjusting the Sound Settings ........................................................................ 20
Adjusting the Volume ................................................................................... 21
Extra Sound Settings ................................................................................... 22
(Auto Volume/Melody/Pseudo Stereo/Turbo Sound/Voice Boost) ................ 21
Selecting the Sound Mode
............................................................................
24
Switching the Sound Off Temporarily
............................................................
24
Setting the Sleep Timer................................................................................. 26
Setting and Displaying the Current Time....................................................... 26
Switching the Television On and Off Automatically....................................... 27
Setting the Blue Screen Mode....................................................................... 28
Activating the Child Lock
............................................................................... 29
Enjoying Games ........................................................................................... 32
INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
Connecting to the Audio/Video Input/Outputs ............................................... 35
Viewing Picture From External Sources........................................................ 37
Automatic Degaussing to Remove Color Patches......................................... 37
Troubleshooting: Before Contacting Service Personnel................................ 38
Symbols
Press Important Note
■
Entering the Game Zone ............................................................................... 33
■
Changing the Game Mode ............................................................................ 33
■
Adjusting the Game Contrast ........................................................................ 34
■
Adusting the Game Volume .......................................................................... 34
Activating/Deactivating Digital NR................................................................. 21
Equalizer Settings ........................................................................................ 23
Adjusting the Woofer settings........................................................................
Setting for Pick 'n' Choose............................................................................. 28
Setting the Reminder ................................................................................... 30
Connecting to the DVD Input (Option) .......................................................... 36
25
Page 4
4
ENG
Front Panel Controls (depending on the model)
➣
Buttons and markings are subject to change.
MENU DISPLAY
VOLUME ADJUSTMENT
CHANNEL SELECTION
POWER
STAND-BY INDICATOR
REMOTE CONTROL SENSOR
MENU DISPLAY
VOLUME ADJUSTMENT
CHANNEL SELECTION
STAND-BY
INDICATOR
REMOTE CONTROL SENSOR
Page 5
5
ENG
Using the Buttons on the Front Panel
If your remote control no longer works or you have lost it, you can
use the controls on the front panel of the television to:
1 Switch on the television when it is in Standby mode and
select channels ( CH )
2 Access the main menu ( MENU )
3 Adjust the volume ( -
VO L + )
Buttons on the front panel have the same function as corresponding
buttons on the remote control.
Page 6
6
your model.
Rear of TV
A)
B) 75 COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK
RCA AUDIO/VIDEO INPUT/OUTPUT CONNECTORS
RCA AUDIO /VIDEO INPUT
CONNECTORS
Front of TV
INPUT
MONITOR
-OUT
VIDEO AUDIO
INPUT
MONITOR
-OUT
VIDEO
(
MONO
)
L-AUDIO-R
A
A
B
B
ENG
➢
Connecting earphones ( ) /headphones ( )
◆ You can connect a set of earphones/headphones to your television if you wish to watch a
television programme without disturbing the other people in the room.
◆ Prolonged use of earphones/headphones at a high volume may damage your hearing.
Connection Panels
The actual configuration on your TV may be different, depending on your model.
Side of TV
RCA AUDIO/VIDEO
INPUT CONNECTORS
HEADPHONE JACK (OPTION)
RCA AUDIO/VIDEO
INPUT CONNECTORS
HEADPHONE JACK
(OPTION)
Page 7
7
ENG
(depending on the model)
TURBO SOUND ON/OFF
SOUND STANDARD
SOUND MODE SELECTION
DIRECT CHANNEL SELECTION
ONE/TWO/THREE-DIGIT
CHANNEL SELECTION
CHANNEL SCANNING
TEMPORARY SOUND SWITCH-
VOLUME DECREASE
CHANNEL DOWN
POWER
OFF
GAME DISPLAY
TUNER/CABLE NETWORK
SELECTION
EXTERNAL INPUT SELECTION
ON-SCREEN DISPLAY
PREVIOUS CHANNEL
PICTURE STANDARD
PICTURE SIZE
CHANNEL UP
VOLUME INCREASE
MENU DISPLAY
VOICE BOOST
( for MONO models)
( for STEREO models)
Operation of remote control may be affected by bright artificial light near to the TV set.
Page 8
8
ENG
You must insert or replace the batteries in the remote control when
you :
◆ Purchase the television.
◆ Find that the remote control is no longer operating
correctly.
1 Remove the cover of the remote control by pressing the symbol
( ) and pulling the cover in the direction of the arrow.
2 Insert batteries, taking care to respect the polarities:
◆ + on the battery with +on the remote control
◆-on the battery with -on the remote control
3 Replace the cover by pushing it in the direction of the arrow.
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
Plug the aerial or cable network input cable to the 75Ω coaxial socket
on the rear of the television.
Inserting the Batteries in the Remote Control
Connecting the Aerial (or Cable Television Network)
Cable
Television
Network
Rear of TV
75Ω
Page 9
9
ENG
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the TV set and
the frequency is 50 or 60Hz.
2 Press the POWER (ON/OFF) button on the front of the
television.
Result
: The Standby indicator lights up on the front panel.
3 Press the POWER button on the remote control to switch the
television on.
Result
: The programme that you were watching last is re-
selected automatically.
4 To switch your television off, press the POWER (ON/OFF)
button again on the front of the television.
Placing Your Television in Standby mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you
turn it on.
1 Press the POWER button on the remote control.
Result:
The screen is turned off and the Standby indicator on
the front of the television lights up.
2 To switch the screen back on, simply press the POWER button
again on the remote control.
➣
Do not leave your television in standby mode for long
periods of time (when you are away on holiday, for example).
In this case, you should switch it off completely.
Switching Your Television On and Off
Page 10
10
ENG
Plug & Play Feature
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1 If the television is in Standby mode, press the POWER button
on the remote control.
Result: The message Plug & Play is displayed. It flickers for a
little while and then the Language menu is automatically
displayed.
2 Press the or button to select required language. Press the
MENU button to enter the language, and then the message Ant.
Input Check is displayed.
If any language is not selected on the Language menu, the
Language menu will disappear after 30 seconds.
3 Make sure that the antenna is connected to the TV. And then press
the + or button to store the channels (refer to Storing the
Channels Automatically on page 12).
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4 When searching and storing is complete, the Time menu is
displayed.
5 Press the + or button to move to the hour or minute. Set the hour
or minute by pressing the or button (refer to Setting and
Displaying the Current Time on page 26).
6 When you have finished, press the MENU button.
Result: The message ENJOY YOUR WATCHING is displayed,
and then the channel which has been stored will be
activated.
7 If you want to reset this feature...
1 Press the MENU button.
2 Press the or button to select the Function , and then
press the + or button.
3 Select the Plug & Play by pressing the or button, and
then press the + or button.
Result: The message Plug & Play is displayed.
ENJOY YOUR WATCHING
Time
Clock - - : - - am
Plug & Play
Ant. Input Check
Auto Store Exit
P 1 VHF1
Exit
Time
Clock 11 : 35
Move Exit
Enjoy Your Watching...
"
"
" "
"
"
" "
"
"
"
"
"
"
"
"
"
"
"
"
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Reminder
Select Enter Exit
Function
" "
"
"
Page 11
11
ENG
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1 Press the MENU button.
2 Press the or button to select the Function
3 Press the + or button to select the Language
4 Select a particular language by pressing the
+
or
- button
repeatedly.
5 When you have finished, press the TV button or, press the
MENU button repeatedly to return to normal viewing.
Picture
Mode Custom
Adjust
Digital NR : Off
Size : Normal
Select Enter Exit
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Low Noise AMP : Off
Reminder
Select Enter Exit
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Low Noise AMP : Off
Reminder
Select Adjust Exit
Page 12
12
ENG
Storing the Channels Automatically
You can scan the frequency ranges available on your television and
in your country and store all the channels found automatically.
The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to Ò "Sorting the Stored
ChannelsÓ" on page 16.
1 Press the MENU button.
2 Press the or button to select the Channel .
3 Press the + or button to select the Auto Store
4 Press the + or button again.
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end automatically.
5 When searching and storing is complete, the Sort menu is
displayed.
To... Then...
Sort the stored channels Go to Step 4 of the Sorting
into the desired numerical order the Stored Channels
procedure on page 16.
Exit the channel store function Press the MENU button
without sorting the channels repeatedly until the menus
disappear.
Storing the Channels Automatically - Turbo Store
Using Turbo search you can store all the channels found in your
country in much less time compared to auto store.
The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to “Sorting the Stored
Channels” on page 16.
Perform the above mentioned steps to store channels using
Turbo Store. In the third step select Turbo store instead of
Auto store.
➣
Mode Custom
Adjust
Digital NR : Off
Size : Normal
Picture
Select Enter Exit
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Channel
Select Adjust Exit
P3 VHF1
Exit
Channel
Sort
From : P 1
To : P--Store : ?
Select Adjust Exit
If sound does not work regularly after storing channels,
select the sound system that best corrosponds in
" Manual Store" menu (refer to the next page)
Page 13
13
ENG
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found.
◆ The number by which you wish to identify each stored
channel.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Channel” and press the + or
– button.
3 Press the ▲ or ▼ button to select the “Manual Store” and press the
+ or – button.
Result:
The “Manual Store” menu is displayed with the “Color
System” selected.
4 Press the + or – button repeatedly until the color is of the best
quality.
Result:
The “Color System” is changed (depending on the
model).
AUTO ↔ PAL ↔ SECAM ↔ NTSC4.43
➣
NTSC4.43 is a “trick” playback mode used
by special VCR’s to play PAL-recorded
videos in NTSC mode.
5 Press the ▲ or ▼ button to select the “Sound System” and press
the + or – button repeatedly until the sound is of the best quality.
Result:
The “Sound System” is changed (depending on the
model).
B/G↔ D/K↔ I
➣
If sound does not work regularly after storing
channels, select the sound system which best
corresponds.
6 To start the search, select the “Search” and then press the + or –
button.
Result:
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
7 To assign a programme number to the channel, select the
“Prog.No.”. Press the + or – button until you find the correct
number.
8 To store the channel and associated programme number, select
the “Store” and press the + or – button.
Result:
“OK” is displayed.
9 Repeat Steps 6 to 8 for each channel to be stored.
10 When you have finished manual storage, press the TV button
or, press the MENU button repeatedly to return to normal viewing
Storing the Channels Manually
➞
➞
➞
➞
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : OK
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Select Enter Exit
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust Exit
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust Exit
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust Exit
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust Exit
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : OK
Select Adjust Exit
Channel
Channel
Channel
Channel
Channel
Channel
Page 14
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are
displayed during scanning.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Channel” and press the + or
– button.
3 Press the ▲ or ▼ button to select the “Add/Erase” and press the +
or – button.
Result: The “Add/Erase” menu is displayed.
4 Press the ▲ or ▼ button to select the required channel.
5 To add or erase the desired channel by pressing the + or – button.
6 When you have finished adding and erasing channels, press the
TV button or, press the MENU button repeatedly to return to
normal viewing.
14
ENG
Skipping Unwanted Channels
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Channel
Select Enter Exit
Add/Erase
P 0 : Added
P 1 : Added
P 2 : Added
P 3 : Added
Channel
Select Adjust Exit
Add/Erase
P 0 : Erased
P 1 : Added
P 2 : Added
P 3 : Added
Channel
Select Adjust Exit
Page 15
15
ENG
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If however the signal is weak or distorted, you may have to finetune the channel manually.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Channel” and press the + or
– button.
3 Press the ▲ or ▼ button to select the “Fine Tune” and press the +
or – button.
Result: The “Fine Tune” menu is displayed with the “Tune”
selected.
4 To... Press the...
obtain a sharp and ◆ + or – button.
clear picture and Result: The horizontal bar’s
good sound quality cursor moves to the left
or right.
memorise adjusted ◆▲ or ▼ button to select the “Store”.
picture or sound ◆ + or – button.
Result:
“OK” is displayed.
erase adjusted ◆▲ or ▼ button to select the “Erase”.
picture or sound ◆ + or – button.
Result:
“OK” is displayed.
5 When you have finished, press the TV button or, press the
MENU button repeatedly to return to normal viewing.
Fine tuning Channel Reception
Channel
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Select Enter Exit
Channel
Fine Tune
Tune : -/+
Store : ?
Erase : ?
Select Adjust Exit
Fine Tune +1
Channel
Fine Tune
Tune : -/+
Store : OK
Erase : ?
Select Adjust Exit
Channel
Fine Tune
Tune : -/+
Store : ?
Erase : OK
Select Adjust Exit
Page 16
You can exchange the numbers of two channels, in order to:
◆ Modify the numeric order in which the channels have
been automatically stored.
◆ Give easily remembered numbers to the channels that
you watch most often.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Channel” and press the + or
– button.
3 Press the ▲ or ▼ button to select the “Sort” and press the + or –
button.
Result:
The “Sort” menu is displayed with the “From” selected.
4 Press the + or – button until the channel number that you wish to
change is displayed.
Result:
The selected channel’s picture is displayed.
5 Press the ▲ or ▼ button to select the “To”.
6 Press the + or – button until the new number by which you wish to
identify the channel is displayed.
Result: The selected channel is exchanged with the one
previously stored to the chosen number.
Example: If you select “ P 1” for the “From” and “P 3” for the “To”:
◆ Channel 1 becomes channel 3.
◆ Channel 3 becomes channel 1.
7 To... Press the...
Confirm the exchange ◆▲ or ▼ button to select the “Store”.
of channel numbers ◆ + or – button.
Result: “OK” is displayed.
➣
You can exchange other
channel numbers by selecting
“From” and returning to step 4.
8 When you have finished sorting channels, press the TV button
or, press the MENU button repeatedly to return to normal viewing
16
ENG
Sorting the Stored Channels
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Channel
Select Enter Exit
Channel
Sort
From : P 1
To : P--Store : ?
Select Adjust Exit
Channel
Sort
From : P 1
To : P 3
Store : ?
Select Adjust Exit
Channel
Sort
From : P 3
To : P 1
Store : OK
Select Adjust Exit
Page 17
17
When using the numeric buttons to select a channel stored at
programme position ten or higher, follow the instructions below.
1 Press the button.
Result: The symbol is displayed.
2
Example: To select channel 42, press 4, followed by 2.
Once you have stored the channels on your television, you can
switch easily from one channel to another using the remote
control.
To switch... Press...
To the next channel .
To the previous channel .
To another channel The numeric button(s) corresponding
to that channel.
Press PRE-CH (Pre Channel button) to switch repeatedly between last two
channels displayed. This can be done as many times as required.
Changing Channels
Pre-Channel
Press CH.SCAN (Channel Scan button) for a 2 Second review of each
added channel. Press any key to exit Channel Scanning.
Channel Scan
ENG
Selecting a Channel Numbered Ten or Over
Enter the two-digit channel number or three-digit channel number.
To select channel 187, Press -/--/--- till "---" is displayed. Then
press 1, followed by 8, followed by 7.
"--" or "---"
Page 18
18
ENG
You can select the type of picture which best corresponds to your
viewing requirements. The following picture effects are available in
the order given:
Custom, Standard, Sports, Natural, Mild.
1 Press the MENU button.
Result: The "Picture" menu is displayed.
2 Press the + or button.
Result: The "Mode" menu is selected.
3 Select to satisfy your preference by pressing the
These picture standards are saved for each channel.
+ or button.
4 When you have been finished, press the TV button or, press the
MENU button repeatedly to return to normal viewing.
You can select the required picture effect by simply
pressing the "P.STD" (Picture standard) button on the
remote control.
Changing the Picture Standard
Selecting the Picture Format
(depending on the model)
You can select the picture format which best corresponds to your
viewing requirements. The following picture formats are available
in the order given:
Normal
Zoom
16:9 (option)
1 Press the MENU button.
Result:
The "Picture" menu is displayed.
2 Press the + or button.
3 Press the
or button to select the "Size".
4 Select to satisfy your preference by pressing the + or button.
5 When you have been finished, press the TV button or, press the
MENU button repeatedly to return to normal viewing.
You can select the required picture format by simply
pressing the
"P.SIZE
(Picture size) button on the
remote control.
Size
: Normal
Mode Custom
Adjust
Digital NR : Off
Size : Normal
Picture
Select Adjust Exit
Mode Custom
Adjust
Digital NR : Off
Select Adjust Exit
Picture
"
Page 19
19
ENG
Adjusting the Picture Settings
Your television has several settings which allow you to control picture
quality:
Color Tone, Contrast, Brightness, Sharpness, Color,
1 Press the MENU button.
Result: The "Picture" menu is displayed.
2 Press the + or button.
3 Press the or button to select the "Adjust", and then press the +
or button.
Result: When select the "Mode" to "Custom", the "Adjust" menu is
displayed.
4 To adjust the... Press the...
Color Tone + or button.
Result: You select the required option
(Normal, Warm1, Warm2,
Cool1, Cool2).
Contrast + or button.
Brightness Result: The horizontal bar is displayed.
Sharpness
Color
5 When you are satisfied with the settings, press the TV button or,
press the MENU button repeatedly to return to normal viewing.
The television has an "Automatic Degaussing" system that is
activated if magnetic interference is present. To degauss the
television screen, switch power off by pressing the
POWER
(ON/OFF) button on the front panel (refer to
"Automatic
Degaussing to Remove Color Patches"
on page 34 ).
If you make any changes to the "Adjust" settings, the picture
standard is automatically switched to
"Custom".
Color Tone : Normal
Contrast 100
Brightness 50
Sharpness 50
Color 50
Color Tone : Normal
Contrast 100
Brightness 50
Sharpness 50
Color 50
Contrast 100
Adjust
Tint (NTSC only)
Mode Custom
Digital NR : Off
Size : Normal
Select Enter Exit
Picture
Adjust
Color Tone : Normal
Contrast 90
Brightness 50
Sharpness 50
Color 50
Select Adjust Exit
Adjust
Color Tone : Normal
Contrast 90
Brightness 50
Sharpness 50
Color 50
Select Adjust Exit
Contrast 91
Picture
Picture
Page 20
20
You can select the type of special sound effect to be used when
watching a given broadcast. The following sound effects are
available in the order given:
Custom, Standard, Music, Movie, Speech.
1 Press the MENU button.
2 Press the or button to select the "Sound" and press the + or
button.
Result: The "Mode" menu is selected.
3 Select to satisfy your preference by pressing the + or button.
4 When you have been finished, press the TV button or, press the
MENU button repeatedly to return to normal viewing.
You can select the required sound effect by simply pressing
the "S.STD" (Sound standard) button on the remote
control.
Changing the Sound Standard
(depending on the model)
ENG
Sound
Mode Custom
Adjust
Auto Volume : Off
Melody : Off
Pseudo Stereo : Off
Select Adjust Exit
These Sound Standards can be saved for each channel.
Adjusting the Sound Settings
Sound
Mode Custom
Adjust
Auto Volume : Off
Melody : Off
Pseudo Stereo : Off
Select Enter Exit
Sound
Adjust
Bass 50
Treble 50
Balance L 50 R 50
Select Adjust Exit
Balance L 49 R 51
The sound settings can be adjusted to suit your preferences.
(depending on the model)
1 Press the MENU button.
2 Press the or button to select the "Sound" and press the + or
button.
3 Press the or button to select the "Adjust" and press the + or
button.
Result:
4 Select the required option by pressing the or button and
adjust to satisfy your preference by pressing the + or button.
5 Press the + or button.
Result: The horizontal bar is displayed.
6 When you are satisfied with the settings, press the TV button or,
press the MENU button repeatedly to return to normal viewing.
When select the "Mode" to "Custom", the "Adjust" menu
is displayed.
Page 21
21
ENG
Adjusting the Volume
You can adjust the volume by pressing the + or - button on the
remote control.
Press the + button to increase the volume (cursor moves to the right)
Press the -button to decrease the volume (cursor moves to the left)
The volume setting is retained:
Different Volume Level can be adjusted and saved at each
Channel and in external input mode.
When you switch the television to standby mode
When you switch the television off using the
POWER (ON/OFF)
button on the front panel.
If there is a power failure.
Activating/Deactivating Digital NR
If the broadcast signal received by your television is weak,
you can activate the Digital Noise Reduction Feature to
help reduce any picture disturbance and ghosting that may
appear on the screen.
1 Press the MENU button.
Result: The "Picture" menu is displayed.
2 Press the + or button.
3 Press the or button to select the "Digital NR", and then press +
or button to select "On".
4 When you are satisfied with the settings, press the TV button or,
press the MENU button repeatedly to return to normal viewing.
Picture
Mode Custom
Adjust
Digital NR : Off
Normal : Normal
Size : Normal
Select Enter Exit
Mode Custom
Adjust
Digital NR : On
Normal : Normal
Size : Normal
Select Adjust Exit
Picture
Page 22
22
ENG
Extra Sound Settings
Sound
Mode Custom
Adjust
Auto Volume : Off
Melody : Off
Pseudo Stereo : Off
Woofer
Select Enter Exit
Sound
Mode Custom
Adjust
Auto Volume : On
Melody : Off
Pseudo Stereo : Off
Woofer
(depending on the model)
The following sound settings can be adjusted to suit your preferences.
Each broadcasting station has its own signal conditions,
and so it is not easy for you to adjust the volume every
time the c hannel is changed. "Auto Volume" lets you
automatically adjust the volume of the desired channel by
lowering the sound output when the modulation signal is
high or by raising the sound output when the modulation
signal is low. This is saved for each Channel individually.
You can hear clear melody sound when the T V is
powered O N or O FF.
Select Adjust Exit
Sound
Mode Custom
Adjust
Auto Volume : Off
Melody : On
Pseudo Stereo : Off
Woofer
Select Adjust Exit
Sound
Mode Custom
Adjust
Auto Volume : Off
Melody : Off
Pseudo Stereo : On
Woofer
Select Adjust Exit
"Pseudo Stereo" converts a monaural sound signal into
two identical left and right channels.
O nce the "Pseudo Stereo" is set to "O n" or "Off", the
setting applies to the sound effects such as Standard,
Music, Movie and Speech. This is saved for eac h C hannel
and for external input mode individually.
You can enjoy more magnific ent and dynamic sound
when watching music, movie or other channel. "Turbo
Sound" suitably emphasizes both higher and lower bands
of sound (and includes other effects). You can select the
Turbo Sound by pressing the "TURBO" button on the Remote
Control. This is saved for each Channel and for external input
mode individually.
1 Press the MENU button.
2 Press the or button to select the "Sound" and press the + or
button.
3 To... Press the...
Change an option or button.
Select the required option (On/Off) + or button.
4 When you are satisfied with the settings, press the TV button
or, press the MENU button repeatedly to return to normal viewing.
Page 23
23
ENG
Equalizer Settings (depending on the model)
The sound settings can be adjusted to suit your personal
preferences.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Sound” and press the + or –
button.
4 To... Press the...
Change an option ▲ or ▼ button.
Select the required option + or – button.
5 When you are satisfied with the settings, press the TV button
or, press the
MENU button repeatedly to return to normal viewing.
Result: The "Sound" menu will be displayed.
3
Result: The "Equalizer" menu will be displayed.
Press the ▲ or ▼ button to select the “Equalizer” and press the
+ or – button.
➢
When you select the "Mode" to "Custom", the "Equalizer" is displayed.
Voice Boost enhances the clarity of Dialogue/Speech
of the current channnel.
–
Sound
Mode Custom
Equalizer
Auto Volume : Off
Melody : Off
Pseudo Stereo : Off
Woofer
Select Enter Exit
R
L
Adjust Select Exit
Sound
100 300 1K 3K 10K
Voice Boost
(depending on model)
1 Press the MENU button.
2 Press the or button to select the "Sound" and press the + or
button.
3 To... Press the...
Change an option or button.
Select the required option (On/Off) + or button.
4 When you are satisfied with the settings, press the TV button
or, press the MENU button repeatedly to return to normal viewing.
is a trademark of SRS Labs, Inc.
Dialog Clarity , technology is incorporated under license from
SRS Labs, Inc.
Sound
Auto Volume : Off
VOICE BOOST : Off
Select Adjust Exit
Page 24
24
ENG
5 When you are satisfied with the settings, press the TV button
or, press the
MENU button repeatedly to return to normal viewing.
➣
If you want to use "Headphones", first turn the
Woofer to "Off" position.
1 Press the MUTE button.
Result:
The sound is switched off and is displayed.
2 When you wish to turn the sound back on at the same volume as
before, press the MUTE button again (or either of the volume
buttons).
Adjusting the Woofer Settings (depending on model)
Sound
Mode Custom
Adjust
Auto Volume : Off
Melody : Off
Pseudo Stereo : Off
Woofer
Select Enter Exit
Woofer
Woofer : On
Woofer Volume : 70
Select Adjust Exit
Bass sound effect can be heard very clearly if you have chosen the
Woofer mounted model.
To connect the Woofer, remove the packing, insert the 2 circular ribs
on the front of the Woofer in the holes provided on top of the
back cabinet. Rest the Woofer gently on the top of the back
cabinet. Connect the 2 lead wires (one Black & one Red) in the
Woofer Jack provided at the back of the cabinet.
To activate the Woofer:
1 Press the MENU button.
2 Press the or button to select the "Sound
" and press the
-
or
+ button.
3 Press the or button to select the "Woofer", and press the
-
or
+ button.
Result:
Select the "Woofer Volume" by pressing the or button and
4
select the desired volume level.
The "Woofer" menu is displayed with "Woofer" set to "On".
Page 25
ENG
25
NICAM
Stereo
Stereo
A2
Type of broadcast
Regular broadcast
(Standard audio)
NICAM Mono
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
Bilingual or Dual-I/II
Regular +
Stereo
On-screen indication
(Normal use)
MONO
MONO
NICAM (Normal)
STEREO
NICAM (Normal)
Dual-I --> Dual-II --> MONO
NICAM NICAM (Normal)
Dual-I
STEREO
MONO
MONO
MONO (Normal use)
Dual-II
MONO
(Forced Mono)
Page 26
26
ENG
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to Standby mode.
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to Standby mode.
1 Press the MENU button.
2 Press the or button to select the
"Function
" and press the -or
+ button.
3 Press the or button to select the
"Time"
, and press the -or +
button.
Result:
The
"Time"
menu is displayed with the " Sleep" selected.
4 Press the
-
or + button repeatedly and cycle through the preset
time intervals (30, 60, 90, 120, 150, 180).
Result: The television automatically switches to standby mode
when the timer reaches 0.
5 To cancel the sleep timer function, press the
-
or + button
repeatedly and select "Off" .
Setting the Sleep Timer
You can set the television's clock so that the current time is displayed
when you press the
"DISPLAY
" button.
You must also set the time if you wish to use the automatic On/Off
timers.
The clock setting will be re-activated when pressing the
" "(ON/OFF) button on the front panel.
1 Press the MENU button.
2 Press the or button to select the
"Function
" and press the -or
+ button.
3 Press the or button to select the
"Time"
, and press the -or +
button.
Result: The
"Time
" menu is displayed with the
"Clock
" selected.
4 To... Press the...
Move to the hour or minute
-
or + button.
Set the hour or minute or button.
5 When you have finished, press the TV button or, press the
MENU button repeatedly to return to normal viewing.
6 To display the... Press the DISPLAY button...
Channel information Once.
Current time Twice.
7 To remove the display, press the DISPLAY button again.
Setting and Displaying the Current Time
(depending on the model)
Sleep Off
Clock 11 : 00 am
Timer
Adjust Move Exit
Sleep Off
Clock 11 : 00 am
Timer
Select Adjust Exit
Reminder
Reminder
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Function
Select Enter Exit
Time
Clock 11 : 35
Timer Off
Select A Exit
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Low Noise AMP : Off
Select Enter Exit
Time
Clock 11 : 35
Timer Off
Select Adjust Exit
Function
Function
Function
Page 27
ENG
You can set the On/Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
choice at the time you select
◆ Switch off automatically at the time you select
➣
The first step is to set the television’s clock (refer to
“Setting and Displaying the Current Time” on the
previous page). If you have not yet set the clock, the
message “Set the clock first” is displayed.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Function” and press the
-
or
+ button.
3 Press the ▲ or ▼ button to select the “Time”, and press the
-
or +
button.
Result:
The “Time” menu is displayed.
4
Press the ▲ or ▼ button to select the “Timer”.
6 Press the
-
or + button to set the mode to “On”.
: The "On Time ", "Off Time", "Pr.No." and "On Vol."
7 Press the ▲ or ▼ button to select the “On Time”.
8 Set the time at which you wish the television to be switched On.
To... Press the...
Move to the hour or minute -or + button.
Adjust the hour or minute ▲ or ▼ button.
9 In the same way, set the time at which you wish the television to be
switched Off.
11
When you have finished setting the On/Off time, Pr. No. and On Vol.
press the TV button or press the MENU button repeatedly to
➣
Fuzzy Power Off
If no function buttons (including remote control buttons
or front panel buttons) are operated for three hours after
the TV is turned on by “On time”, the TV will be
automatically turned off.
Switching the Television On and Off Automatically (depending on the model)
Time
Sleep Off
Clock 11 : 35 am
Timer
5
Press the - or + button to enter "Timer" menu.
Result
options are displayed
You can also set the program no. and On Volume, you want to switch
on your TV with on timer.
10
return to normal viewing.
Pr.NO.: Enter the Program Number you want to switch on your TV
with On Timer.
On Vol.: Enter the Volume you want to switch with On Timer.
➣27➣
Reminder
Clock 11 : 35
Timer Off
Select Adjust Exit
Timer
Timer off
Select Adjust Exit
Function
Function
Function
Timer
Timer on
On Time --:-Off Time --:-Pr. No.
On Vol.
Select Adjust Exit
Timer
Timer on
On Time 11:35 am
Off Time --:-Pr. No.
On Vol.
Select Adjust Exit
Timer
Timer on
On Time 11:35 am
Off Time 11:00 pm
Pr. No.
On Vol.
Select Adjust Exit
---
---
Function
---
---
Function
---
---
Function
Timer
Timer on
On Time 11:35 am
Off Time 11:00 pm
Pr. No.
On Vol.
Select Adjust Exit
135
25
Page 28
28
ENG
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background. If you
wish to continue viewing the poor picture, you must set the "Blue
Screen" mode to "Off".
1 Press the
1 Picture Standard is saved for all the channels and external input
mode, individually as Custom, Standard, Sports, Natural or Mild.
2
3
Sound Standard is saved for all the channels and external input
mode, individually as Custom, Standard, Music, Movie or Speech.
The status of sound settings, such as Auto Volume, Pseudo Stereo
and Turbo Sound are saved as ON/OFF for all the channels and
4
In addition to Sound Setting, Volume level for all the channels and
external input mode, can be saved individually as per your preference.
MENU button.
2 Press the or button to select the Function and press the + or
button.
3 Press the
You can save certain custom features depending on preferences for
all the 200 Channels and external input mode.
or button to select the "Blue Screen".
4 Select the required option (On/Off) by pressing the + or button.
5 When you are satisfied with the settings, press the TV button
or, press the MENU button repeatedly to return to normal viewing.
Setting the Blue Screen Mode
Settings for Pick 'n' Choose
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Function
Select Enter Exit
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Low Noise AMP : Off
Select Adjust Exit
and external input mode individually.
Page 29
29
ENG
You can restrict viewing by locking the channels of your choice.
Example
: You can prevent your children from watching
unsuitable programmes.
1 Press the MENU button.
2 Press the ▲ or ▼ button to select the “Function” and press the
-
or
+ button.
3 Press the ▲ or ▼ button to select the “Child Lock” and press the
-
or + button.
Result
: The “Child Lock” menu is displayed.
4 Set to “On” by pressing the
-
or + button.
➣
If you want to unlock a channel, set to “Off”.
5 Press the ▲ or ▼ button to select the “Prog.No.”. Select the
number of the channel to be locked by pressing the -or + button.
6 Press the ▲ or ▼ button to select the “Lock” and press the
-
or +
button.
Result
: “Locked” is displayed.
7 When you have finished, press the TV button or, press the
MENU button repeatedly to return to normal viewing.
➣
Activating the Child Lock
If any channel is locked, you cannot enter the “Channel”
menu using the CTV front panel keys.
(the message “Not available” is displayed).
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Select Enter Exit
Function
Child Lock
Child Lock : Off
Select Adjust Exit
Function
Child Lock
Child Lock : On
Prog.No. : 1
Lock : ?
Select Adjust Exit
Function
Child Lock
Child Lock : On
Prog.No. : 1
Lock : Locked
Select Adjust Exit
P 1
Child Lock : Locked
Page 30
30
ENG
Select Adjust Exit
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Select Enter Exit
Time
Clock 11 : 35
Sleep Off
Timer Off
Clock 11 : 00 am
Timer
er
Remind
Select A Exit
Reminder
Reminder : Off
Function
Function
Function
You can set a reminder so that you can display your message at
desired time.
The first step is to set the television clock. (Please refer to
"Setting and Displaying the Current Time" section).
If you have not set the Clock, the message "Set the Clock first"
is displayed.
1
Press the MENU button.
2 Press the
button.
3 Press the
button.
Result: The "Time" menu is displayed.
4 Press the
button.
Result: The "Reminder" menu is displayed.
or button to select the
button to select the "Time", and press
or
button to select the "Reminder", and press
or + or
"Function" and press + or
+ or
Select Adjust Exit
Function
Reminder
Reminder
Reminder : On
Display Time
Edit ---------------
Erase ?
Select Enter Exit
Select Enter Exit
Reminder
Reminder
Reminder : On
Erase ?
Reminder : On
Display Time
Display Time
Edit ---------------
Erase ?
Select Enter Exit
Reminder
Reminder
Reminder : On
Erase ?
Reminder : On
Display Time
Display Time
Edit GOOD MORNING
Erase ?
--:-- am
---------------
Function
--:-- am
--:-- am
---------------
---------------
Function
--:-- am
--:-- am
---------------
---------------
6
Press the
+ or
button to set the mode to "On".
Result: The "Display Time", "Edit" and "Erase" are displayed.
button to select "Edit", that enables you to enter
8
Press the
or
your desired message.
9 Set the Message you want to display.
To... Press the...
move to the next
position
Enter the character
or button.
button.
or
Select Enter Exit
Page 31
31
ENG
button to select "Erase", and press or button.
Press
10
Result
11 Press the Menu button to return to "Reminder" menu.
or
: The message entered by you will be erased.
Reminder
Reminder
Reminder : On
Erase ?
Reminder : On
Display Time
Display Time
Edit GOOD MORNING
Erase ?
Function
--:-- am
--:-- am
---------------
---------------
12 Press the or button to select "Display Time".
13
Set the time at which you wish the message to be displayed.
To... Press the...
move to the hour
or minute
Adjust the hour
or minute
When you have finished setting the "Reminder", press TV
14
button or press the MENU button repeatedly to return to normal
viewing.
or button.
button.
or
Select Enter Exit
Reminder
Reminder
Reminder : On
Erase ?
Reminder : On
Display Time
Display Time
Edit GOOD MORNING
Erase ?
Select Enter Exit
Reminder
Reminder
Reminder : On
Erase ?
Reminder : On
Display Time
Display Time
Edit GOOD MORNING
Erase ?
Select Enter Exit
MESSAGE FOR YOU
GOOD MORNING
Function
--:-- am
--:-- am
---------------
---------------
Function
12:00 am
--:-- am
---------------
---------------
Exit
Page 32
32
ENG
Enjoying Games (depending on the model)
You can enjoy the following games programmed in this TV:
1 Press the GAME button to enter the Game mode.
Result:
The "Game Selection Menu" will be displayed.
2 Press the button to select the game and
There are nine boxes numbered 1-9 on the screen. These numbers
will not appear on the screen but are given for reference. After some
time a object (money bag) will appear randomly in any one of the
boxes.You have to hit the target with numeric keys 1-9 on the remote.
If the target appers in the box no. 1 then you have to press key 1 on
the remote to hit the target. If you hit the target another object
If you want to stop during the game, press the MENU button. Then,
the final score window will be displayed.
4
If you want to re-start the game, press the MENU, -or + button.
Then, the final score window will be switched to the START
window.
5
To exit the Game mode, press the GAME button.
Clickomania
Water Baloons
-
+
or
button to
go to the start screen. Press
Clickomania
Water Balloons
Water ballons will fall downwards & you have to hit them by
hitting arrows by pressing the key.
You can move the bow up and down by pressing the and keys.
final score will be displayed in the following two cases:¿ If you miss the target 20 times.
+
6
◆
◆
¿ If you reach the maximum game score of 9990.
-
+
or
again to start the game.
¿ If you miss the object (money bag) 20 times.
¿ If you hit the target 999 times and reach the maximum hit score.
will appear in the same box confirming your hit. If you miss, will
not appear. Game will end in the following cases:-
¿ If you use all your arrows (200).
ENG
or
CLICKOMANIA
WATER BALOONS
START
12 3
45 6
78 9
L EVEL: 0 HIT: 0
SCORE : 0 MISS: 0
ARROW 200 LIFE 20
SCORE 0010
Page 33
33
ENG
E ntering in the Game Zone
(Depending on Model)
There are two ways of entering the "Game Zone"
(a) By the "Game Key"
Press the "Game Key" on the Remote control.
1 Press the MENU button.
▲
▼
2 Press
+
or
–
button.
Result: You will enter the "GAME ZONE"
(b) By the "Game Menu"
button to select "FUNCTION" and press
or
▲
▼
3 Press
+
or
–
button.
button to select "GAME ZONE" and press
or
Result: Game menu is displayed.
▲
▼
4 Press
or
button to select "GAME ZONE"
5 Press
+
–
button to enter in the "GAME ZONE"
or
Result: You will enter the "GAME ZONE"
Changing the Game Mode
You can select the game mode which best corresponds to your
1
Press the MENU button.
▲
▼
2 Press
+
or
–
button.
button to select "FUNCTION" and press
or
▲
▼
3 Press
+
or
–
button.
button to select "GAME ZONE" and press
or
Result: Game menu is displayed.
4 Press
+
–
button repeatedly to change Game Mode to
or
"CUSTOM" or "STANDARD"
viewing requirements.
5
For viewing the effect of"Game Mode", enter into Game Zone.
Select Enter Exit
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Game Zone
Function
Game Zone
Mode Custom
Contrast : 50
Volume : 10
Game Zone
Select Enter Exit
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Game Zone
Select Enter Exit
Function
Game Zone
Mode Custom
Contrast : 50
Volume : 10
Game Zone
Select Enter Exit
Page 34
34
ENG
Adjusting the Game Contrast
Adjusting the Game Volume
You can adjust the contrast of the Game as per your requirements.
1
Press the MENU button.
▲
▼
2 Press
+or –button.
button to select "FUNCTION" and press
or
▲
▼
3 Press
+or
–
button.
button to select "GAME ZONE" and press
or
Result: Game menu is displayed.
5 Press
+
–
button to change Game Contrast as per your choice
or
6
For viewing the effect of"Game Contrast", enter into Game Zone.
▲
▼
4 Press
or
button to select "CONTRAST"
Note: Game contrast can be changed only in Custom Mode.
You can adjust the volume of the Game as per your requirements.
1
Press the MENU button.
▲
▼
2 Press
+
or
–
button.
button to select "FUNCTION" and press
or
▲
▼
3 Press
+
or
–
button.
button to select "GAME ZONE" and press
or
Result: Game menu is displayed.
5 Press
+
–
button to change Game Vol as per your choice
or
6
For viewing the effect of "Game Vol", enter into Game Zone.
▲
▼
4 Press
or
button to select "VOLUME"
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Game Zone
Select Enter Exit
Function
Game Zone
Mode Contrast
Contrast : 50
Volume : 10
Game Zone
Select Enter Exit
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Game Zone
Select Enter Exit
Function
Game Zone
Mode Contrast
Contrast : 50
Volume : 10
Game Zone
Select Enter Exit
Page 35
35
ENG
Connecting to the Audio/Video Input/Outputs
➢
The actual configuration on your TV may be different, depending on
your model.
➢
The Audio/Video connector on the rear of the television is
used for equipment with an RGB output.
Rear of TV
(depending on the model)
Video disc player
Decoder/
Video game device
VCR
Camcorder
Satellite receiver
AV cable
(depending on the model)
Front (or Side) of TV
(depending on the model)
AV cable
(depending on the model)
Video disc player
Decoder/
Video game device
Camcorder
➢
◆ The Audio/Video connector on the front (or side) of the television is
used for equipment, such as camcorders, video disc players and
certain video games.
◆ When both the front (or side) and rear connectors are connected to external equipment,
the front (or side) AV has the priority.
OUTPUT
VIDEO AUDIO
INPUT
MONITOR
MONITOR
-OUT
INPUT
-OUT
INPUT
VIDEO AUDIO
(
MONO
L-AUDIO-R
VIDEO
)
Page 36
36
ENG
Connecting to the D VD Input (Option)
➢
The DVD/RCA (AUDIO-L and R) connectors are used for equipment with
a DVD output.
DVD
Rear of TV
DV D-IN
MONITOR
-OUT
INP UT
VID E O
L- AUD IO-R
(
)
MONO
Page 37
37
ENG
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1 Check that all the necessary connections have been made.
2 Switch the television on and if necessary, press the VIDEO
button one or more times until the required input is displayed.
➢
Depending on the source selected, the pictures may appear
automatically.
➢
To watch television programmes again, press the TV
button and select the number of the channel required.
Viewing Pictures From External Sources
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and color patches appear on the screen, you must:
◆ Switch the television off by pressing the “ POWER ” (ON/OFF) button on the front panel.
◆ Unplug the television from the wall socket.
◆ Leave the television power-off (stand-by) for about 30 minutes so that the automatic degauss
function can be activated, and then press the “ POWER ” button on the remote control.
☛
If your television will be left unattended, press the “ POWER ” (ON/OFF) button to turn
your television off.
Automatic Degaussing to Remove Color Patches
Page 38
38
ENG
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the POWER (ON/OFF) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
◆ Check the volume.
◆ Check whether the MUTE button has been pressed on the
remote control.
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
◆ Try to identify the electrical appliance that is affecting the television
and move it further away.
◆ Plug your television into a different mains socket.
◆ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
Troubleshooting: Before Contacting Service Personnel
No sound or picture
Normal picture but no sound
No picture or black and white picture
Sound and picture interference
Blurred or snowy picture,
distorted sound
Remote control malfunctions
Page 39
39
ENG
Memo
Page 40
-
AFTER SALES SERVICE
-
Do not hesitate to contact your retailer or service
agent if a change in the performance of your product
indicates that a faulty condition may be present.
AA68-02418D (ENG)
ELECTRONICS
Loading...