Samsung CW-29M064V User Manual
COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
REMOTE CONTROL
ON-SCREEN MENUS
TELETEXT FUNCTION
(depending on the model)
ENG
Safety Instructions
The following illustrations represent the precautions to be taken when using and moving your television.
10%
H
5¡
Do NOT expose the television to
extreme temperature conditions or
to extreme humidity conditions.
If the television is broken, do not
try to repair it yourself. Contact
qualified service personnel.
Displaying any stationary images that exceed the long time, it can cause uneven aging of
☛
75%
35¡
H
Do NOT expose the television to
direct sunlight.
During a storm conditions
(especially when there is lightning)
unplug the television from the
mains socket and aerial.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
Do NOT expose the television to
any liquids.
If the remote control is not used for
a long period of time, remove the
batteries and store it in a cool, dry
place.
picture tubes (CRTs) that leave subtle, but permanent burned-in ghost images in the television
picture. To avoid this, vary the programming and images, and primarily display full screen
moving images, not stationary patterns or dark bars.
Caution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO PREVENT ELECTRICAL SHOCK, DO
NOT REMOVE REAR COVER, NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING: TO PREVENT DAMAGE WHICH MAY
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
2
The lightning flash and arrow head
within the triangle is a warning sign
alerting you of “dangerous voltage”
inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
The main voltage is indicated on the rear
☛
of the TV set and the frequency is 50 or
60Hz.
Contents
◆ PREPARING YOUR TELEVISION
■ Safety Instructions ................................................................................................ 2
■ Caution ................................................................................................................. 2
■ Control Panels ...................................................................................................... 4
■ Connection Panels ............................................................................................... 5
■ Viewing Picture From External Sources ............................................................... 7
■ Infrared Remote Control (All Functions Except Teletext) ..................................... 8
■ Infrared Remote Control (Teletext Functions) ...................................................... 9
■ Inserting the Batteries in the Remote Control....................................................... 10
■ Connecting the Aerial or Cable Television Network ............................................. 10
■ Switching Your Television On and Off.................................................................. 11
■ Placing Your Television in Standby mode ............................................................ 11
■ Plug & Play Feature (depending on the model).................................................... 12
■ Viewing the Demonstration................................................................................... 13
■ Choosing Your Language..................................................................................... 13
◆ SETTING UP THE CHANNELS
■ Storing the Channels Automatically (depending on the model)............................ 14
■ Storing the Channels Manually (depending on the model)................................... 15
■
Giving Channels Names (depending on the model) ........................................ 17
■ Skipping Unwanted Channels .............................................................................. 18
■ Fine tuning Channel Reception ............................................................................ 19
■ Sorting the Stored Channels ................................................................................ 20
■ Selecting a Channel Numbered Ten or Over ....................................................... 21
◆ USING THE TELEVISION
■ Changing the Picture Standard ............................................................................ 21
■ Adjusting the Picture Settings .............................................................................. 22
■ Setting the Digital Noise Reduction ...................................................................... 23
■ Using the Tilt Control Feature (depending on the model)..................................... 23
■ Selecting the Picture Format ................................................................................ 24
■ Setting the Blue Screen Mode.............................................................................. 24
■ Changing the Sound Standard ............................................................................. 25
■ Adjusting the Sound Settings (depending on the model) ..................................... 26
■ Extra Sound Settings (depending on the model).................................................. 27
(Auto Volume/Melody/Pseudo Stereo/Turbo Sound/Virtual Surround)
■ Selecting the Sound Mode (depending on the model) ......................................... 28
■ Adjusting the Volume............................................................................................ 29
■ Switching the Sound Off Temporarily ................................................................... 29
■ Setting the Sleep Timer (depending on the model) .............................................. 30
■ Setting and Displaying the Current Time (depending on the model).................... 31
■ Switching the Television On and Off Automatically (depending on the model) .... 32
■ Activating the Child Lock ...................................................................................... 33
◆ USING THE TELETEXT FUNCTION (depending on the model)
■ Teletext Decoder .................................................................................................. 34
■ Displaying Teletext Information ............................................................................ 34
■ Selecting a Specific Teletext Page....................................................................... 35
■ Using FLOF to Select a Teletext Page ................................................................. 36
■ Storing Teletext Pages ......................................................................................... 36
◆ INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
■ Automatic Degaussing to Remove Color Patches................................................ 37
■ Troubleshooting: Before Contacting Service Personnel....................................... 37
■ Wiring the Mains Power Supply Plug (UK Only)................................................... 38
ENG
Symbols
☛
➢
Press Important Note
3
ENG
Control Panels
The actual configuration on your TV may be different, depending on
➢
your model.
ΠINPUT SOURCE SELECTION
´ MENU DISPLAY
ˇ VOLUME ADJUSTMENT
¨ CHANNEL SELECTION
ˆ STANDBY INDICATOR
Ø REMOTE CONTROL SENSOR
∏ POWER ON/OFF
Using the Buttons on the Panel
➣
If the remote control no longer works or you have lost it, you can use controls on the panel of the TV to:
◆ Switch on the TV when it is in Standby mode and select channels ( ▼ C/P. ▲ )
◆ Access the main menu ( MENU )
◆ Adjust the volume (
◆ Switch among Video input modes ( TV/VIDEO )
4
-
+ )
Connection Panels
The actual configuration on your TV may be different, depending on
➢
your model.
Side of the TV Front of the TV
ΠAUDIO/VIDEO INPUT
´ HEADPHONE CONNECTOR
ΠConnecting External A/V Devices (INPUT)
The RCA (VIDEO + AUDIO-L and R) connectors are used for equipment such as camcorders, video disc
players and some video game devices.
◆ When both the side (or front) and rear connectors are connected to external equipment, the side
➣
(or front) AV has the priority.
◆ When using the mono equipment such as camcorders, video disc players and some video game
devices, connect to the “AUDIO-L” input connector.
ENG
´ Connecting Headphones
-
You can connect a set of headphones to your television if you wish to watch a television programme without
disturbing the other people in the room.
-
Prolonged use of headphones at a high volume may damage your hearing.
Whenever you connect an audio or video system to your
☛
television, ensure that all
Refer to the documentation supplied with your equipment for
detailed connection instructions and associated safety
precautions.
elements are switched off.
5
ENG
Connection Panels (continued)
The actual configuration on your TV may be different, depending on
➢
your model.
Rear of the TV
(
)
MONO
L-AUDIO-R
VIDEO
MONITOR
-OUT
INPUT 2
INPUT 1
(
)
MONO
L-AUDIO-R
VIDEO
MONITOR
-OUT
2
1
RGB
INPUT 2
INPUT 1
Ϋ Connecting External A/V Devices (INPUT/OUTPUT)
The connectors (RCA or SCART) are used for equipment such as video disc players, video game devices,
camcorder and VCR.
ˇ Connecting DVD
The RCA (Y + Pb + Pr + AUDIO-L and R) connectors are used for a DVD.
When using the mono equipment such as camcorders, video disc players and some video game
➣
devices, connect to the “AUDIO-L” input connector.
6
Viewing Pictures From External Sources
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1 Check that all the necessary connections have been made.
2 Switch the television on and if necessary, press the VIDEO ()
button one or more times until the required input is displayed.
Depending on the source selected, the pictures may appear
➢
automatically.
To watch television programmes again, press the TV ()
➢
button and select the number of the channel required.
ENG
7
ENG
Infrared Remote Control (All Functions Except Teletext)
Buttons and markings are subject to change.
➣
POWER
DIRECT CHANNEL SELECTION
SWITCH REPEATEDLY
ONE/TWO-DIGIT CHANNEL
SELECTION
VOLUME INCREASE
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
NEXT CHANNEL
TEMPORARY SOUND SWITCH-
VOLUME DECREASE
TUNER/CABLE NETWORK
MENU DISPLAY
MOVE TO THE REQUIRED MENU
ADJUST AN OPTION VALUE
RESPECTIVELY
PICTURE SIZE
SOUND MODE SELECTION
TURBO SOUND ON/PLUS/OFF
SOUND MENU DISPLAY
OFF
SELECTION
OPTION/
(OPTION)
(OPTION)
(OPTION)
EXTERNAL INPUT SELECTION
PREVIOUS CHANNEL
ON-SCREEN DISPLAY
EXIT FROM ANY DISPLAY
CHANGE CONFIRMATION
AUTOMATIC SWITCH-OFF
PICTURE STANDARD
SOUND STANDARD (OPTION)
Operation of remote control may be affected by bright artificial light near to the TV set.
➣
8
Infrared Remote Control (Teletext Functions)
Buttons and markings are subject to change.
➣
TELETEXT HOLD
ENG
TELETEXT NEXT PAGE
LIST/FLOF MODE SELECTION
TELETEXT PREVIOUS PAGE
TELETEXT REVEAL
PROGRAMME SELECTION BY
NAME
TELETEXT SUB-PAGE
TELETEXT DISPLAY/MIX
FASTEXT TOPIC SELECTION
PICTURE SIZE
TELETEXT STORE
9
ENG
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you :
◆ Purchase the television.
◆ Find that the remote control is no longer operating
correctly.
1 Remove the cover of the remote control by pressing the symbol
() and pulling the cover in the direction of the arrow.
2 Insert batteries, taking care to respect the polarities:
◆ + on the battery with + on the remote control
◆-on the battery with -on the remote control
3 Replace the cover by pushing it in the direction of the arrow.
75Ω
Rear of TV
Connecting the Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
Plug the aerial or cable network input cable to the 75Ω coaxial socket
on the rear of the television.
or
Cable
Television
Network
10
Switching Your Television On and Off
The mains lead is attached to the rear of the television.
If you have purchased this television in the United
☛
Kingdom, refer to page 38 for further instructions on
plug wiring.
1 Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the TV set and
➢
the frequency is 50 or 60Hz.
2 Press the “ ” (ON/OFF) button on the front of the television.
Result
: The Standby indicator lights up on the front panel.
3 Press the POWER () button on the remote control to switch the
television on.
Result
: The programme that you were watching last is re-
selected automatically.
4 To switch your television off, press the “ ” (ON/OFF) button again
on the front of the television.
ENG
Placing Your Television in Standby mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you
turn it on.
1 Press the POWER () button on the remote control.
Result:
2 To switch the screen back on, simply press the POWER () button
again on the remote control.
Do not leave your television in standby mode for long
➣
periods of time (when you are away on holiday, for example).
In this case, you should switch it off completely.
The screen is turned off and the Standby indicator on
the front of the television lights up.
11
ENG
Plug & Play Feature (depending on the model)
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1 If the television is in Standby mode, press the POWER () button
on the remote control.
Plug & Play
Language
English Português
Deusch Italiano
Français Sverige
Nederland Türkçe
Español
Adjust Select
Ant. Input : Check
Exit
P 1
-- ---
471 MHz 48 %
Exit
EППЛУИО¿
Result: The message
little while and then the “Language” menu is automatically
displayed.
Plug & Play
is displayed. It flickers for a
2 Press the ▲ or ▼ button to select required language. Press the
()
MENU
Ant. Input : Check
➣
button to enter the language, and then the message
is displayed.
If any language is not selected on the
“Language” menu will be displayed about 30 seconds later.
Language
menu, the
3 Make sure that the antenna is connected to the TV. And then press
the œ or √ button to store the channels (refer to “Storing the
Channels Automatically” on page 14).
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4 When searching and storing is complete, the
displayed.
Time
menu is
5 Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button (refer to “Setting and
Displaying the Current Time” on page 31).
6 When you have finished, press the MENU () button.
Result:
The message
then the channel which has been stored will be
activated.
ENJOY YOUR WATCHING
is displayed, and
Time
Clock 11 : 35
Move Exit
ENJOY YOUR WATCHING
Function
Language : English
Time √
Plug & Play √
Blue Screen : Off
Child Lock
Demonstration √
Select Enter Exit
√
12
7 If you want to reset this feature...
1 Press the MENU
2 Press the ▲ or ▼ button to select the
press the œ or √ button.
3 Select the
then press the œ or √ button.
Result:
()
button.
Plug & Play
The message
by pressing the ▲ or ▼ button, and
Plug & Play
Function
is displayed.
, and then
Loading...