Samsung WS32Z46V, WS28Z46V, WS-32M166T, CW29Z68P, CW29M66V User Manual [en, en]

...

COLOUR TELEVISION

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

TELETEXT

ENG

Safety Instructions

◆ Do not expose the television to extreme temperature conditions or to extreme humidity conditions.

◆ Do not expose the television to direct sunlight and other sources of heat.

◆ Do not expose the television to any liquids.

◆ Never put objects of any kind into the television, and do not place a water-containing vessel on the

television.

◆ During a storm conditions (especially when there is lightning) unplug the television from the mains

socket and aerial.

◆ Do not step on or twist the power cord.

◆ Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.

◆ Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.

◆ If the television is broken, do not try to repair it yourself. Contact qualified service personnel.

◆ If the remote control is not used for a long period of time, remove the batteries and store it in a

cool, dry place.

◆ Do not drop the remote control.

This device is not for use in industrial environments.

Caution

WARNING: TO PREVENT DAMAGE WHICH MAY RESULT

IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRICAL SHOCK,

DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

The lightning flash and arrow head within the triangle is a warning sign alerting you of “dangerous voltage” inside the product.

The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.

☛

The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz.

ENG

Contents

◆ FOREWORD

■ Safety Instructions......................................................................................... 2

■ Caution.......................................................................................................... 2

◆ CONNECTING AND PREPARING YOUR TELEVISION

■ View of Your Television................................................................................. 5

■ Infrared Remote Control (All Functions Except Teletext Functions).............. 6

■ Infrared Remote Control (Teletext Functions)............................................... 7

■ Inserting the Batteries in the Remote Control................................................ 8

■ Connecting to an Aerial or Cable Television Network................................... 9

■ Switching Your Television On and Off........................................................... 10

■ Placing Your Television in Standby Mode..................................................... 10

■ Becoming Familiar with the Remote Control................................................. 11

■ Plug & Play Feature....................................................................................... 12

■ Viewing the Demonstration............................................................................ 13

■ Choosing Your Language.............................................................................. 13

◆ SETTING THE CHANNELS

■ Storing Channels Automatically..................................................................... 14

■ Sorting the Stored Channels ......................................................................... 15

■ Storing Channels Manually............................................................................ 16

■ Skipping Unwanted Channels ....................................................................... 18

■ Assigning Names to Channels ...................................................................... 19

■ Fine Tuning Channel Reception.................................................................... 20

◆ USING YOUR TELEVISION (continued)

■ Changing the Picture Standard ..................................................................... 21

■ Adjusting the Picture Settings........................................................................ 22

■ Activating/Deactivating the Digital Noise Reduction Feature ........................ 23

■ Setting the Blue Screen................................................................................. 24

■ Using the Tilt Control Feature........................................................................ 24

■ Selecting the Picture Size.............................................................................. 25

■ Freezing the Current Picture ......................................................................... 25

■ Changing the Sound Standard...................................................................... 25

■ Adjusting the Sound Settings ........................................................................ 26

■ Extra Sound Settings

(Auto volume / Melody / Turbo sound / Pseudo stereo / Virtual surround).... 27

■ Selecting the Sound Mode (depending on the model) .................................. 28

ENG

Contents (continued)

◆ USING YOUR TELEVISION

■ Setting the Sleep Timer................................................................................. 29

■ Setting and Displaying the Current Time....................................................... 30

■ Switching the Television On and Off Automatically....................................... 31

◆ USING THE TELETEXT FEATURE

■ Teletext Feature ............................................................................................ 32

■ Displaying the Teletext Information............................................................... 32

■ Selecting a Page by Number......................................................................... 33

■ Using FLOF to Select a Page........................................................................ 34

■ Storing Teletext Pages.................................................................................. 34

◆ ADDITIONAL INFORMATION ON CONNECTIONS

■ Connecting to the External Input/Outputs...................................................... 35

■ Connecting to the Audio Output .................................................................... 35

■ Connecting to the RCA Input......................................................................... 36

■ Connecting to the S-Video Input.................................................................... 36

■ Connecting Headphones............................................................................... 37

■ Viewing Pictures From External Sources...................................................... 37

◆ RECOMMENDATIONS FOR USE

■ Automatic Degaussing to Remove Colour Patches....................................... 38

■ Troubleshooting: Before Contacting Service Personnel................................ 38

■ Wiring the Mains Power Supply Plug (UK Only)............................................ 39

☛

➢

Press Important Note

Symbols

ENG

View of Your Television (depending on the model)

Audio Input (R, L)

Video Input

S-Video Input

Headphone connector

SCART Audio/Video Input/Output

Monitor Audio Output

75Ω Coaxial Connector for Aerial/Cable Network

Rear of the TVSide of the TV

Control Panels

Connection Panels

Front of the TV

➢

The actual configuration on your TV may be different, depending on your model.

a) Input source selection

b) Menu display

c) Volume decrease

d) Volume increase

e) Previous channel

f) Next channel

g) Standby indicator

h) Remote control sensor

i) Power On/Off

ENG

Infrared Remote Control (All Functions Except Teletext Functions)

➢

The performance of the remote control may be affected by bright light.

TELEVISION STAND-BY

TURBO SOUND ON/OFF

ONE/TWO-DIGIT CHANNEL

SELECTION

TEMPORARY SOUND SWITCH-OFF

VOLUME DECREASE

PREVIOUS CHANNEL

VCR FUNCTIONS

DIRECT CHANNEL SELECTION

AUTOMATIC SWITCH-OFF

STILL PICTURE

SOUND MENU DISPLAY

PICTURE MENU DISPLAY

TUNER/CABLE NETWORK SELECTION

EXTERNAL INPUT SELECTION

ON-SCREEN DISPLAY

PICTURE EFFECT SELECTION

NEXT CHANNEL

VOLUME INCREASE

PICTURE SIZE SELECTION

SOUND MODE SELECTION SOUND EFFECT SELECTION

MENU DISPLAY

➣

Buttons and markings are subject to change.

ENG

Infrared Remote Control (Teletext Functions)

➣

Buttons and markings are subject to change.

FASTEXT TOPIC SELECTION

TELETEXT PAGE HOLD

TELETEXT STORE

TELETEXT NEXT PAGE

TELETEXT PREVIOUS PAGE

TELETEXT DISPLAY/ MIX BOTH TELETEXT INFORMATION AND THE NORMAL BROADCAST

TELETEXT MODE SELECTION (LIST/FLOF)

TELETEXT REVEAL

TELETEXT SUB-PAGE

TELETEXT SIZE SELECTION

PROGRAMME SELECTION BY NAME

You must insert or replace the batteries in the remote control when you:

◆ Purchase the television

◆ Find that the remote control is no longer operating

correctly

1 Remove the cover on the rear of the remote control by pressing

the symbol downwards and then pulling firmly to remove it.

2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking

care to respect the polarities:

◆-on the battery against -on the remote control

◆+on the battery against +on the remote control

3 Replace the cover by aligning it with the base of the remote

control and pressing it back into place.

ENG

Inserting the Batteries in the Remote Control

PRESS

To view television channels correctly, a signal must be received by the set from one of the following sources:

◆ An outdoor aerial

◆ A cable television network

◆ A satellite network

1 In the first three cases, connect the aerial or network input cable to

the 75Ω coaxial socket on the rear of the television.

2 If you are using an indoor aerial, you may need to turn it when

tuning your television until you obtain a picture that is both sharp and clear. For further details, refer to:

◆ “Storing Channels Automatically ” on page 14

◆ “Storing Channels Manually” on page 16

Connecting to an Aerial or Cable Television Network

ENG

Rear of the TV

Cable Television

Network

ENG

The mains lead is attached to the rear of your television.

☛

If you have purchased this television in the United Kingdom, refer to page 39 for further instructions on plug wiring.

1 Plug the mains lead into an appropriate socket.

➢

The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.

2 Press the “ ” button (On/Off) on the front of the television.

Result

: The Standby indicator on the front of the television

lights up.

3 Press the POWER () button on the remote control to switch the

television on. Result

: The programme that you were watching last is re-

selected automatically.

➣

If you have not yet stored any channels, No clear picture appears. Refer to “Storing Channels Automatically” on page 14 or “Storing Channels Manually” on page 16.

4 To switch your television off, press the “ ” button (On/Off) again.

Placing Your Television in Standby Mode

Your television can be placed in Standby mode, in order to reduce:

◆ Power consumption

◆ Wear of the cathode ray tube

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1 Press the POWER () button on the remote control.

Result

: The screen is turned off and the Standby indicator on

the front of the television lights up in red.

2 To switch the television back on, simply press the POWER ()

button again.

☛

Do not leave your television in Standby mode for long periods of time (when you are away on holiday, for example). Turn your television off by pressing the “ ” button (On/Off) on the front of the television. It is best to unplug the set from the mains and aerial.

Switching Your Television On and Off

Front of the TV

The remote control is used mainly to:

◆ Change channels and adjust the volume

◆ Set up the television using the on-screen menu system

The following table presents the most frequently used buttons and their functions.

Button Viewing Function Menu Function

▲ Used to display the next Used to select the previous

stored channel. menu option.

▼ Used to display the Used to select the next menu

previous stored channel. option.

to Used to display the corresponding channels.

-/--

Used to select a channel numbered ten or over. Press this button, and the “

” symbol is displayed.

Enter the two-digit channel number.

Used to decrease the Used to... volume.

◆ Display a submenu containing selections for the current menu option.

◆ Search backwards manually for channels

◆ Reduce a menu option value.

Used to increase the Used to... volume.

◆ Display a submenu containing selections for the current menu option.

◆ Search forwards manually for channels

◆ Increase a menu option value.

Used to switch the sound off temporarily.

➣

To turn the sound back on, press this button again, or press the

or + button.

MENU Used to display the Used to return to the previous

on-screen menu system. menu or normal viewing.

TV Used to switch the Used to exit from the menu

television on when it is system and return to normal in Standby mode. viewing directly.

Becoming Familiar with the Remote Control

ENG

When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.

1 If the television is in Standby mode, press the POWER () button

on the remote control. Result

: The message Plug & Play is displayed. It flickers for

a little while and then

Language menu is automatically

displayed.

2 Select the appropriate language by pressing the ▲ or ▼ button.

Press the

MENU button to enter the language.

Result

: The message Ant. Input : Check is displayed.

➣

If any language is not selected on the Language menu, the Language menu will disappear about 30 seconds later.

3 Make sure that the antenna is connected to the TV. Press the

+ button.

Result

: The

Auto store menu is displayed with Country is

selected.

4 Select your country by pressing the

or + button. To search the

channels, select

Search by pressing the ▲ or ▼ button, and then

press the

or + button. Press the MENU button to stop the

search. Result

: The

Time menu is displayed with Clock is selected.

➣

Refer to “Storing Channels Automatically” on page 14.

5 Press the

or + button to move to the hour or minute. Set the

hour or minute by pressing the

▲ or ▼ button.

➣

Refer to “Setting and Displaying the Current Time” on page

30.

6 When you have finished, press the MENU button.

Result

: The message ENJOY YOUR WATCHING is displayed,

and then the channel which has been stored will be activated.

7 If you want to reset this feature...

1 Press the MENU button.

2 Press the ▲ or ▼ button to select Setup, and then press the

or + button. Result

: The Plug & Play is selected.

3 Press the -or + button again.

Result

: This feature starts with the message

Plug & Play

is displayed.

Plug & Play Feature

Plug & Play

ENJOY YOUR WATCHING

Setup

Plug & Play

√√

Language

√√

Blue screen : On Demonstration

√√

Tilt : 0

Auto store

Country : Others Search : -/+

Time

Clock : -- : -Timer : Off

Ant. Input : Check

+ 28 hidden pages