Samsung CT2Z55, CT2Z57, CT2Z58 User Manual

COLOUR TELEVISION

CT21Z43/21Z45/21Z47/21Z50/

21Z55/21Z57/21Z58/21AJ0/ 21AE0/21AF0/21AM0

Connection Panel (depending on the model)

The product color and shape may vary depending on the

➢

model.

Rear Jack

Front (or Side) Panel

Owner’s Instructions

Before operating, please read this manual thoroughly,

and retain it for future reference.

Record your Model and Serial number.

▪ Model __________ ▪ Serial No. __________

Control Panel (depending on the model)

The product colour and shape may vary depending on the

➢

model.

Front (or Side) Panel

1 On-screen menu display 2 Volume adjustment 3 Channel selection 4 Remote control sensor 5 Standby indicator 6 Power on/off

 You can use the 3 buttons to switch the TV on when it is

in standby mode depending on the model.

 The 2 and 3 buttons also have the same function as the

◄/►/▲/▼ buttons on the remote control.

 If the remote control no longer works or you have

misplaced it, you can use the controls on the panel of the television.

1 2

Whenever you connect an audio or video system to your

➢

television, ensure that all elements are switched off. Please be sure to match the colour coded input terminals

and ca

ble jacks.

1 Audio/Video Output Jacks

Connect to the audio/video input jacks of a recording VCR.

2 Audio/Video Input Jacks

Connect to the and similar devic

3 Component Video Input Jacks (Y, PB, PR)

Connect to the Co set-top box. 480i video signal input is available.

When using the Component Video input, connect audio jacks

to “AV IN 2 (AUDIO-L/R)”.

4 ANT IN

Connect to an antenna or to a cable TV system.

audio/video output jacks of VCRs, DVD players

es.

mponent video outputs of a DVD or DTV

2 3

1 Audio input 2 Video inpout 3 Headphone jack

Please be sure to match the colour coded input terminals

☛

and cable jacks.

Connecting to the RCA Input

The 1 (AUDIO-L/R) and 2 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device.

Connecting to the Headphones

The 3 (headphone) jack is used for watching a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing.

When both the front (or side) AV and rear connectors are

➢

connected to external equipment, the front (or side) AV

receives priority.

2 3

English - 1

AA68-04004A-01

Remote Control (depending on the model)

Turning the TV On and Off

Operation of remote control may be affected by bright

➢

artificial light near to the TV.

This is a special remote control for the visually impaired,

➢

and has Braille points on the POWER, Channel and

Volume buttons.

1 POWER

Turns the TV on and off.

2 Number buttons

Press to select channels directly on the TV.

3 –

Press to select channels over 100. For example,

for channel 122, press “-”, then “2”, then “2”.

4 VOL +, VOL -

Press to increase or decrease the volume.

5 MENU

Displays the main

on-screen menu.

6 ▲/▼/◄/►

Controls the cursor in the menu.

7 ENTER

While using the on-screen menus, press ENTER to activate

(or change) a particular

item.

8 P.MODE

Used to select the

picture effect.

9 MTS

(Multi-channel Television Sound)

Press to choose

“Stereo”, “Mono”, or “SAP” (Secondary Audio Program).

0 R.SURF

Press to automatically return to a preferred channel after a userpreset time delay.

! SOURCE

Press to display all of the available video sources.

@ INFO

Press to display information on the TV screen.

# PRE-CH

Tunes to the previous channel.

$ CH , CH

Press to change channels.

% EXIT

Press to exit the menu.

^ MUTE

Press to temporarily cut off the sound.

& SLEEP

Press to select a preset time interval for automatic shut off.

Press the POWER button on the remote control. You can also use the

Caution: One pole switch is totally not off(one line still live)

➢

if power cord is not unplugged.

POWER button on the TV.

Viewing the Menus

1 Press the MENU button.

The main menu is displayed on the screen. Its left side

has five icons: “Input”, “Picture”, “Sound”, “Channel”, and “Setup”.

2 Press the ▲ or ▼ button to select one of the icons.

Press the

3 Press the ▲ or ▼ button to move to items in the menu.

Press the

4 Press the ▲/▼/◄/► button to change the selected items.

Press the

5 Press the EXIT button to exit from the menu.

ENTER button to access the icon’s sub-menu.

ENTER button to enter items in the menu.

MENU button to return to the previous menu.

Installing Batteries

Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate

normally, check that the “+” and “–” ends of

the batteries are inserted correctly or the batteries are drained.

Do not mix battery types, i.e. alkaline and manganese.

➢

English - 2

English - 3

Setup - Plug & Play (depending on the model)

Input - Source List (depending on the model)

When the TV is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.

1 Press the POWER button on

the remote control.

The “Start Plug & Play.” is

displayed. Press the

ENTER

button, then the “Check

antenna input.” is displayed.

Plug & Play

Start Plug & Play.

Enter Exit

2 Make sure that the antenna

is connected to the TV. Press the

ENTER button,

then the “Auto Program” is

displayed.

3 Press the ENTER button

to start. The TV begins memorizing all available channels. Press the

ENTER

button to stop.

Plug & Play

Check antenna input.

Enter Skip

Plug & Play

Auto Program Air 3

Stop

Enter Skip

continued...

4 After all available channels

are stored, the “Clock Set”

is displayed.

Press the ◄ or ► button to

move to the hour or minute. Set the clock by pressing

Plug & Play

Clock Set 12 : 00 am

Move Enter

Adjust Skip

the ▲ or ▼ button.

5 When you have finished,

press the

The “Enjoy your watching.”

is displayed.

➢

MENU button.

Enjoy your watching.

Plug & Play feature

doesn’t work in the AV mode.

Re-setting the Plug & Play

Method: MENU  ▲/▼ (Setup)  ENTER  ▲/▼ (Plug & Play)  ENTER

Enter

Setup

Return

Plug & Play ►

Language : English ► Time ► Caption : Off ► Child Lock ► Blue Screen : On ►

Move

 Source List

You can switch between viewing signal from connected equipment, such

AV1 AV2 Component

as a VCR, DVD, set-top

box, and the TV source

(broadcast or cable).

Press the SOURCE

➢

button on the remote control repeatedly to select the

Move

desired signal source.

Enter

Source List

Return

+ 5 hidden pages