Samsung CS-29Z50ML User Manual

COLOR TELEVISION

OUT

VID EO

IN 2

IN 1

CS29Z45 / CS29Z47 / CS29Z50 / CS29Z57 CS29Z58 / CS29A730 / CS29A760 / CS29A750 / CS29B850 / CS29U50 / CS29U57

Owner’s Instructions

Before operating, please read this manual thoroughly,

and retain it for future reference.

www.samsung.com/global/register

Control Panel (depending on the model)

Connection Panel (depending on the model)

The actual configuration of your TV may be different,

➢

depending on your model.

Rear Panel

cable television network

Connecting to the RCA Input

The RCA3 and RCA4 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector.) The RCA

5 connectors are used for equipment such as a

DVD with component output.

Front (or Side) Panel

1 Video input

The actual configuration of your TV may be different,

➢

depending on your model.

Front (or Side) Panel

On-screen menu display

Volume adjustment

Channel selection

Remote control sensor

Standby indicator

Power on/off

 You can use the 3 buttons to switch the TV on when it is

in standby mode.

 The 2 and 3 buttons also have the same function as

the ◄/►/▲/▼ buttons on the remote control.

 If the remote control no longer works or you have

misplaced it, you can use the controls on the panel of the television.

cable television network

Whenever you connect an audio or video system to your

☛

television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks.

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the 1 (75 Ω coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear.

Connecting to the RCA Output

The RCA2 connectors are used for equipment, such as a recording VCR or audio system.

English - 1

2 Audio input

Please be sure to match the color coded input terminals

☛

and cable jacks.

Connecting to the RCA Input

The 2 (AUDIO-L/R) and 1 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device.

When both the front (or side) AV and rear connectors (AV



➢

IN2) are connected to external equipment, the front (or side) AV receives priority.

AA68-04048J-00

Remote Control

Operation of remote control may be affected by bright

➢

artificial light near to the TV.

1 POWER

Used to switch the TV on and off.

2 MENU

Used to display the on-screen menu or return to the previous menu.

(depending on the model)

3 ▲/▼/◄/►

Used to control the cursor in the menu.

P < / >

Used to display the next or previous stored channel

= + / -

Used to increase or decrease the volume.

4 MUTE

Used to switch the sound off temporarily. To turn the sound back on, press the MUTE,

= + or = - button.

Numeric buttons

Used to select channels directly.

6 INFO

Used to view the channel information and setting status you selected.

7 SOURCE

Used to display all of the available video sources.

8 TOOLS (depending on

the model)

You can check the following selection by pressing Tools button.

1. Sleep Timer(Used to select a preset time interval for automatic turn off.)

2. Picture Mode(Used to select the picture effect.)

3. Sound Mode(Used to select sound effect.)

4. Dual I-II(Used to select sound mode.)

Installing Batteries

Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate normally, check that the “+” and “-” ends of the batteries are inserted correctly or the batteries are drained.

Do not mix battery types, i.e. alkaline and manganese.

➢

5. Turbo Plus(Used to select the Turbo Plus option.)

6. Sound Adjust (Used to display the sound menu)

9 ENTER

While using the on-screen menus, press the ENTER button to activate (or change) a particular item.

0EXIT

Used to exit from any display or return to normal viewing.

! PRE-CH

Used to switch repeatedly between the last two channels displayed.

Switching the Television On and Off

The mains lead is attached to the rear of the television.

1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the

➢

television and the frequency is 50 or 60Hz.

2 Press the “P” button (On/Off) CH</> button on the

front (or side) of the television.

3 Press the POWER button on the remote control to

switch the television on. The programme that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Channel - Auto Store” on page 3 or “Channel Manual Store” on page 3.

If the television is initially powered on, several basic



➢

customer settings proceed automatically. Refer to “Setup - Plug & Play” on page 3.

4 Press the P</> button, or Numeric button on the

remote control.

Caution: One pole switch is totally not off (one line still

➢

live) if power cord is not unplugged.

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to reduce power consumption and wear of the cathode ray tube. Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1 Press the POWER button on the remote control while

viewing.

2 To switch the television back on, simply press it again.

Do not leave the television in standby mode for long

☛

periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.

English - 2

English - 3

Viewing the Menus

1 Press the MENU button.

The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and

Setup.

2 Press the ▲ or ▼ button to select one of the icons.

Press the ENTER button to access the icon’s sub-menu.

3 Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER button to enter items in the menu.

4 Press the ▲/▼/◄/► button to change the selected

items. Press the MENU button to return to the previous menu.

5 Press the EXIT button to exit from the menu.

3 To search the channels,

press the ENTER button. To stop the search, press the ENTER button. When the channel searching has finished, the Clock Set menu is displayed.

4 Press the ◄ or ► button to

move to the hour or minute. Set the hour or minute by

pressing the ▲ or ▼ button.

5 When you have finished,

press the MENU button. The Enjoy your watching. is displayed, and then the channel which has been stored will be activated.

Plug & Play

Auto Store

Start

Enter

Plug & Play

Auto Store

P 1 102MHz 7 %

Enter

Plug & Play

Clock Set 12:00 am

Move Adjust

Enjoy your watching.

Stop

Enter Skip

Skip

Channel - Auto Store

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

To stop the search before it has finished, press the

➢

ENTER button. When finished, the Sort menu is displayed. To sort the stored channels into the desired numerical order, refer to “Channel - Sort”. To exit without sorting, press the EXIT button.

P 1 102MHz 7 %

Enter

Stop

Return

Setup - Plug & Play (depending on the model)

When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.

1 If the television is in standby

mode, press the POWER button on the remote control. The Start Plug & Play is displayed. To start Plug & Play, press the ENTER button. The Language menu is displayed.

The Language menu

➢

will automatically appear after several seconds, even if the ENTER button is not pressed.

2 Select the appropriated

language by pressing the

▲ or ▼ button. Press the

ENTER button. The Check antenna input. is displayed.

If any language is not selected, the language menu

➢

will disappear about 30 seconds later.

Plug & Play

Start Plug & Play.

Enter

Plug & Play

Language

English

Indonesia Melayu

Move

Plug & Play

Check antenna input.

Enter

continued...

Exit

Skip

Re-setting the Plug & Play

Method: MENU ➜ ▲/▼ (Setup) ➜ ENTER ➜ ▲/▼ (Plug & Play) ➜ ENTER

Plug & Play

Language : English Time Child Lock Blue Screen : On

Move

Enter

Input - Source List (depending on the model)

◆

Source List

You can switch between

viewing signal from connected equipment, such as a VCR, DVD, settop box, and the TV source (broadcast or cable).

You can change the required external source simply

➢

by pressing the SOURCE button on the remote control. It might take a short period of time for pictures to be switched. To return to the TV mode, press the SOURCE button on the remote control.

Move

AV1 AV2 Component

Enter

Setup

Return

Source List

Return



   

Channel - Sort

This operation allows you to change the programme numbers of stored channels. This operation may be necessary

From : P 1

To : P-Store : ?

Sort

after using auto store.

◆

From: Channel number to

Move

Adjust

Return

be changed.

◆

To: New channel number to be identified.

◆

Store: Confirmation the exchange of channel numbers.

+ 5 hidden pages