COLOUR TELEVISION
CS29Z45 / CS29Z47 / CS29Z50 / CS29Z57 CS29Z58 / CS29A730 / CS29A760 / CS29A750
Owner’s Instructions
Before operating, please read this manual thoroughly, and retain it for future reference.
Register your product at
www.samsung.com/global/register
The actual configuration of your TV may be different, depending on your model.
Front (or Side) Panel
1On-screen menu display
2Volume adjustment
3Channel selection
4Remote control sensor
5Standby indicator
6Power on/off
You can use the 3 buttons to switch the TV on when it is in standby mode depending on the model.
The 2 and 3 buttons also have the same function as the ◄/►/▲/▼ buttons on the remote control.
If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television.
The actual configuration of your TV may be different, depending on your model.
Rear Panel |
|
|
|
|
or |
|
|
cable television |
|
|
network |
AV IN / OUT |
COMPONENTIN |
|
VIDEO |
L - AUDIO - R |
(480i/480p/576i/576p/ |
720p/ 080i/ 080p) |
||
OUT |
|
Y |
IN 2 |
|
PB |
IN |
|
PR |
|
|
or |
|
|
cable television |
|
|
network |
Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1 (75 Ω coaxial socket).
To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear.
English -
Connecting to the RCA Output
The RCA2 connectors are used for equipment, such as a recording VCR or audio system.
Connecting to the RCA Input
The RCA3 and RCA4 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector.)
The RCA5 connectors are used for equipment such as a DVD with component output.
Front (or Side) Panel
1 S-Video input
2 Video input
3 Audio input
Please be sure to match the colour coded input terminals and cable jacks.
Connecting to the RCA Input
The 3 (AUDIO-L/R) and 2 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device.
Connecting to the S-Video Input
The 1 (S-VIDEO input) and 2 (VIDEO input) connectors are used for equipment with an S-Video output, such as a camcorder or VCR.
When both the front (or side) AV and rear connectors are connected to external equipment, the front (or side) AV receives priority.
AA68-03967L-00
Operation of remote control may be affected by bright artificial light near to the TV.
-/--
MUTE
LNA
1 POWER
Used to switch the TV on and off.
2 Numeric buttons
Used to select channels directly.
3 -/--
Used to select a channel numbered ten or over.
Press this button, then “--” symbol is displayed. Enter the two-digit channel number.
4 / Used to increase or
decrease the volume.
5 MENU
Used to display the onscreen menu or return to the previous menu.
6▲/▼/◄/►
Used to control the cursor in the menu.
7S.MENU
Used to display the sound menu.
8 TURBO
Used to select the turbo sound option.
9 DUAL I-II
Used to select the sound mode.
0 SOURCE
Used to display all of the available video sources.
! INFO
Used to view the channel information and setting status you selected.
@ PRE-CH
Used to switch repeatedly between the last two channels displayed.
# P /
Used to display the
Installing Batteries
next or previous stored channel.
$ EXIT
Used to exit from any display or return to normal viewing.
% MUTE
Used to switch the sound off temporarily. To turn the sound back on, press the MUTE, , or button.
^ ENTER
While using the onscreen menus, press the ENTER button to activate (or change) a particular item.
& S.MODE
Used to select the sound effect.
* P.MODE
Used to select the picture effect.
( TV
Used to return to the TV mode when it is in external input mode.
) EZ.VIEW
Used to display Channel Grouping, Channel Minimizer, Channel Schedule, Music Mode, Half Mute menu.
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not operate normally, check that the
“+” and “-” ends of the batteries are
inserted correctly or the batteries are drained.
Do not mix battery types, i.e. alkaline and manganese.
The mains lead is attached to the rear of the television.
1Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2Press the “I” button (On/Off) on the front (or side) of the television.
3Press the POWER button on the remote control to switch the television on. The programme that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Channel - Auto Store” on page 3 or “Channel - Manual Store” on page 3.
If the television is initially powered on, several basic customer settings proceed automatically. Refer to “Setup - Plug & Play” on page 3.
4To switch the television off, press the “I” button (On/Off) on the front (or side) of the television.
The television can be placed in standby mode, in order to reduce power consumption and wear of the cathode ray tube. Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1Press the POWER button on the remote control while viewing.
The television is in standby mode.
2To switch the television back on, simply press it again.
Do not leave the television in standby mode for long periods of time (when you are away on holiday, for example). Turn the television off by pressing the “I” button (On/Off) on the front (or side) of the television. It is best to unplug the set from the mains and aerial.
English -
1Press the MENU button.
The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and Setup.
2Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4Press the ▲/▼/◄/► button to change the selected items. Press the MENU button to return to the previous menu.
5Press the EXIT button to exit from the menu.
When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.
1 If the television is in standby |
|
|
Plug & Play |
|
|
|
mode, press the POWER |
|
Start Plug & Play. |
|
|
||
|
|
|
|
|
|
|
button on the remote control. |
|
|
|
|
|
|
|
|
|
OK |
|
|
|
The Start Plug & Play is |
|
Enter |
|
|
Return |
|
|
|
|
|
|
|
|
displayed. To start Plug |
|
|
|
|
|
|
& Play, press the ENTER |
|
|
Plug & Play |
|
|
|
|
|
|
|
|
|
|
button. The Language |
|
Language |
|
|
||
|
|
|
|
|||
menu is displayed. |
|
English |
|
|
|
|
|
Indonesia |
|
|
|||
The Language menu |
|
|
|
|||
|
Melayu |
|
|
|
|
|
will automatically appear |
|
|
|
|
|
|
after several seconds, |
|
|
|
|
|
|
even if the ENTER |
Move |
Enter |
|
Skip |
||
button is not pressed. |
|
|
|
|
|
|
2 Select the appropriated |
|
|
|
|
|
|
language by pressing the |
|
|
Plug & Play |
|
|
|
▲ or ▼ button. Press the |
|
Check antenna input. |
||||
|
|
|
|
|
|
|
ENTER button. The Check |
|
|
|
|
|
|
|
|
|
OK |
|
|
|
antenna input. is displayed. |
|
Enter |
|
|
Skip |
|
|
|
|
|
|
|
If any language is not selected, the language menu will disappear about 30 seconds later.
3Make sure that the antenna is connected to the television (refer to page 1). Press the ENTER button. The Area menu is displayed.
continued...
Plug & Play
Area |
|
|
|
|
|
|
|
South Africa |
|
|
Asia/W.Europe |
|
||
|
CIS/E.Europe |
|
America |
|
|
China |
|
|
|
|
Hong Kong/UK |
|
|
|
|
Australia |
|
|
|
|
NZL/Indonesia |
|
|
|
|
Move |
Enter |
Skip |
4Press the ▲ or ▼ button to select your area. Press the
ENTER button.
5To search the channels, press the ENTER button. To stop the search, press the ENTER button.
When the channel searching has finished, the Clock Set menu is displayed.
6Press the ◄ or ► button to move to the hour or minute. Set the hour or minute by pressing the ▲ or ▼ button.
7When you have finished, press the MENU button. The Enjoy your watching. is displayed, and then the channel which has been stored will be activated.
Re-setting the Plug & Play
Method:
MENU ▲/▼ (Setup) ENTER ▲/▼ (Plug & Play)
ENTER
|
|
|
|
Plug & Play |
|
|
|
||||
|
Auto Store |
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Start |
|
|
|
|
|||
|
|
|
|
|
|
|
|
||||
|
|
|
Enter |
|
|
|
Skip |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plug & Play |
|
|
|
||||
|
Auto Store |
|
|
|
|
|
|
|
|||
|
P 1 C-- |
|
|
|
|
02MHz |
|||||
|
|
|
|
|
|
|
|
|
7 % |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stop |
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|||
|
|
|
Enter |
|
|
|
Skip |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plug & Play |
|
|
|
||||
|
|
Clock Set |
|
|
|
|
|
|
|||
|
1 1 : 0 0 |
am |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Move |
|
|
|
Enter |
||||
|
|
|
Adjust |
|
|
|
Skip |
||||
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enjoy your watching. |
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OK |
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
TV |
|
|
|
|
|
Setup |
||||
|
|
|
Plug & Play |
|
|
|
|
|
|||
|
|
|
Language |
: English |
|
||||||
|
|
|
|||||||||
|
|
|
Time |
|
|
|
|
|
|||
|
|
|
Child Lock |
|
|
|
|
|
|||
|
|
|
Blue Screen |
|
: On |
|
|||||
|
|
|
Melody |
|
: On |
|
|||||
|
|
|
Music Mode |
|
: Off |
|
|||||
|
|
|
Move |
Enter |
Return |
Input (depending on the model) -
Source List
Source List
You can switch between viewing signal from connected equipment, such as a VCR, DVD, settop box, and the TV source (broadcast or cable).
|
TV |
|
|
|
Source List |
|
|
|
TV |
|
|
|
|
|
|
AV1 |
|
|
|
|
|
|
AV2 |
|
|
|
|
|
|
S-Video |
|
|
|
|
|
|
Component |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Move |
Enter |
|
Return |
You can change the required external source simply by pressing the SOURCE button on the remote control. It might take a short period of time for pictures to be switched. To return to the TV mode, press the TV button on the remote control.
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
Channels are sorted and stored in the order which reflects their position in the frequency range (with lowest first and highest last). The programme originally selected is then displayed.
To stop the search before it has finished, press the
ENTER button.
When finished, the Sort menu is displayed. To sort the stored channels into the desired numerical order, refer to “Channel - Sort”. To exit without sorting, press the EXIT button.
|
TV |
|
|
|
|
|
Auto Store |
||||
|
|
|
|
Area |
: |
BelgieAsia/W.Europe |
|||||
|
|
|
|
Search |
|
CIS/E.Europe |
|
||||
|
|
|
|
|
|
China |
|
||||
|
|
|
|
|
|
Hong Kong/UK |
|||||
|
|
|
|
|
|
Australia |
|
||||
|
|
|
|
|
|
NZL/Indonesia |
|||||
|
|
|
|
|
|
South Africa |
|
||||
|
|
|
|
|
|
America |
|
||||
|
|
|
Move |
|
Enter |
|
Return |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Search |
|
|||||
|
P 1 C-- |
|
|
|
|
|
02MHz |
||||
|
|
|
|
|
|
|
|
|
|
|
7 % |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stop |
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enter |
|
|
|
|
Return |
|
This operation allows you to |
|
|
|
|
|
|
TV |
|
|
|
Sort |
||
change the programme numbers |
|
|
From |
: P 1 |
|
|
of stored channels. This |
|
|
To |
: P-- |
|
|
|
|
Store |
: ? |
|
|
|
operation may be necessary |
|
|
|
|
|
|
after using auto store. |
|
|
|
|
|
|
From: Channel number to |
|
|
|
|
|
|
|
Move |
Adjust |
Return |
|||
be changed. |
|
|
|
|
|
To: New channel number to be identified.
Store: Confirmation the exchange of channel numbers.
You can store channels, |
|
|
|
|
|
|
|
TV |
|
|
Manual Store |
||||
including those received via |
|
Programme |
|
: P 3 |
|
||
cable networks. When storing |
|
Colour System |
: AUTO |
|
|||
|
Sound System |
: BG |
|
||||
channels manually, you can |
|
Search |
|
: 46MHz |
|
||
choose: |
|
Channel |
|
: C 4 |
|
||
|
Store |
|
: ? |
|
|
|
|
- Whether or not to store each |
|
|
|
|
|
|
|
of the channels found. |
|
Move |
Adjust |
|
|
Return |
|
|
|
|
-The programme number of
each stored channel which you wish to identify.
continued...
English -