Samsung CS29K40MQ, CS-29M40MQ User Manual

COLOR TELEVISION
Owner’s Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at
www.samsung.com/global/register
Connection Panel
The actual configuration of your TV may be different,
depending on your model.
Rear Panel
(depending on the model)
Front (or Side) Panel
Control Panel
The actual configuration of your TV may be different,
depending on your model.
Front (or Side) Panel
1 On-screen menu display 2 Volume adjustment 3 Channel selection 4 Remote control sensor 5 Standby indicator 6 Power on/off
You can use the 3 buttons to switch the TV on when it is
The 2 and 3 buttons also have the same function as the
œ///buttons on the remote control.
If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television.
(depending on the model)
or
cable television
network
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1 (75 coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear.
Connecting to the RCA Output
The RCA2 connectors are used for equipment, such as a recording VCR or audio system.
Connecting to the RCA Input
The RCA3 and RCA4 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector.) The RCA5 connectors are used for equipment such as a DVD with component output (480i only).
1 Video input
2 Audio input
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to the RCA Input
The 1 (VIDEO) and 2 (AUDIO-L/R) connectors are used for equipment, such as a camcorder, video disc player, or video game device.
English - 1
AA68-03843X-00
Remote Control
Operation of remote control may be affected by bright
artificial light near to the TV.
(depending on the model)
88
TURBO
Used to select the turbo sound option.
99
P.SIZE
Used to change the screen size.
00
DUAL I-II
Used to select the sound mode.
!!
SOURCE
Used to display all of the available video sources.
@@
INFO
Used to view the channel information and setting status you selected.
##
PRE-CH
Used to switch repeatedly between the last two channels displayed.
$$
P/
Used to display the next or previous stored channel.
%%
EXIT
Used to exit from any display or return to normal viewing.
^^
MUTE
Used to switch the sound off temporarily. To turn the sound back on, press the MUTE, , or
button.
&&
ENTER
While using the on­screen menus, press the ENTER button to activate (or change) a particular item.
**
S.MODE
Used to select the sound effect.
((
P. MODE
Used to select the picture effect.
))
TV
Used to return to the TV mode when it is in external input mode.
aa
SLEEP
Used to select a preset time interval for automatic turn off.

Switching the Television On and Off

The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
2 Press the “ I ” button (On/Off) on the front (or side) of the
television.
3 Press the POWER button on the remote control to
switch the television on. The programme that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Channel - Auto Store” on page 4 or “Channel ­Manual Store” on page 5.
If the television is initially powered on, several basic
customer settings proceed automatically. Refer to “Setup - Plug & Play” on page 3.
4 To switch the television off, press the “ I ” button (On/Off)
on the front (or side) of the television.
11
POWER
Used to switch the TV on and off.
22
Numeric buttons
Used to select channels directly.
33
-/--
Used to select a channel numbered ten or over. Press this button, then “--” symbol is displayed. Enter the two-digit channel number.
44
55
66
77
/
Used to increase or decrease the volume.
MENU
Used to display the on­screen menu or return to the previous menu.
/ † / œœ / √
Used to control the cursor in the menu.
S.MENU
Used to display the sound menu.
Installing Batteries
Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate normally, check that the “+” and “-” ends of the batteries are inserted correctly or the batteries are drained.
Do not mix battery types, i.e. alkaline and manganese.
English - 2

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to reduce power consumption and wear of the cathode ray tube. Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1 Press the POWER button on the remote control while
viewing. The television is in standby mode.
2 To switch the television back on, simply press it again.
Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for example). Turn the television off by pressing the “I ” button (On/Off) on the front (or side) of the television. It is best to unplug the set from the mains and aerial.

Viewing the Menus

1 Press the MENU button.
The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and Setup.
2 Press the … or button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.

Setup - Plug & Play

When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.
1 If the television is in standby
mode, press the POWER button on the remote control. The Plug & Play is displayed. It flickers for a little while, and then Language menu is displayed.
2 Select the appropriated
language by pressing the or button. Press the ENTER button. The Check antenna input. is displayed.
If any language is not selected, the language menu
will disappear about 30 seconds later.
3 Make sure that the antenna
is connected to the television (refer to page 1). Press the ENTER button. The Auto Store menu is displayed with Area selected.
4 Press the ENTER button again.
5 Press the or button to select your area. Press the
ENTER button.
Plug & Play
Language
English Melayu Indonesia
Move Enter
Check antenna input.
Enter Exit
TV
Area : Belgie
Search
Move Enter Return
Auto Store
ASIA W/EUROPE
CIS E/EUROPE CHINA HONGKONG U/K AUSTRALIA NZ/INDONESIA SOUTH AFRICA AMERICA
continued...
6 To search the channels, select
Search by pressing the orbutton. Press the ENTER
button.
7 Press the ENTER button again
to start search channels. To stop the search, press the ENTER button. When the channel searching has finished, the Time menu is displayed with Clock selected.
8 Press the œ or button to
P 1 C-- ----- 102MHz
TV
Search
Start
Enter Return
Search
Stop
Enter Return
--:--
Clock Sleep Timer : Off
--:--
On Timer
--:--
Off Timer On Timer Volume : 10
move to the hour or minute. Set the hour or minute by pressing the or button.
9 When you have finished, press
Move Enter Return
Enjoy your watching
the MENU button. The Enjoy your watching is displayed, and then the channel which has been stored will be activated.
Re-setting the Plug & Play
Method: MENU …/(Setup) ENTER …/† (Plug & Play)ENTER
TV
Plug & Play
Language : English Time Child Lock Blue Screen : Off Melody : On Demonstration
Move Enter Return
Time
am
am Off am Off
Setup
7 %
3 Press the … or button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the …//œ/button to change the selected
items. Press the MENU button to return to the previous menu.
5 Press the EXIT button to exit from the menu.
English - 3
Loading...
+ 5 hidden pages