Samsung CS-53380TPS, CS-53210TPS, CS-29M6PQ, CS-63970TPS/HA, CS-63900PF/HAC User Manual

...

COLOUR TELEVISION

CS29M6/CS29M20/CS29M16/ CS29K3/CS29K5/CS29K10/ CS29A11/CS25M6/CS25M20/ CS25K10/CS25A11/CS21T10/ CS21T20/CS21A11/CS21M7/ CS21M20/CS21S8

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

PICTURE IN PICTURE

DNIe Jr

(Digital Natural Image engine Junior)

TELETEXT (OPTION)

Contents

◆ CONNECTING AND PREPARING YOUR TELEVISION

■ Control Panels (depending on the model)..................................................... 5

■ Connection Panels (depending on the model) .............................................. 6

■ Infrared Remote Control ................................................................................ 8

■ Inserting the Batteries in the Remote Control................................................ 9

■ Connecting to an Aerial or Cable Television Network ................................... 10

■ Switching Your Television On and Off........................................................... 11

■ Placing Your Television in Standby Mode ..................................................... 11

■ Becoming Familiar with the Remote Control ................................................. 12

■ Plug & Play Feature (depending on the model)............................................. 13

■ Viewing the Demonstration............................................................................ 14

■ Choosing Your Language.............................................................................. 14

◆ SETTING THE CHANNELS

■ Storing Channels Automatically..................................................................... 15

■ Storing Channels Manually............................................................................ 16

■ Skipping Unwanted Channels ....................................................................... 18

■ Sorting the Stored Channels ......................................................................... 19

ENG

◆ USING YOUR TELEVISION

■ Changing the Picture Standard ..................................................................... 20

■ Adjusting the Picture Settings........................................................................ 21

■ Selecting the Picture Size.............................................................................. 22

■ Extra Picture Settings .................................................................................... 23

■ Using the Tilt Control Feature (depending on the model).............................. 24

■ Setting the Blue Screen................................................................................. 24

■ Changing the Sound Standard ...................................................................... 25

■ Adjusting the Sound Settings ........................................................................ 26

■ Extra Sound Settings (depending on the model)........................................... 27

■ Selecting the Melody ..................................................................................... 28

■ Selecting the Sound Mode (depending on the model) .................................. 29

■ Setting and Displaying the Current Time....................................................... 30

■ Setting the Sleep Timer ................................................................................. 31

■ Switching the Television On and Off Automatically ....................................... 32

■ Setting the Preferred Volume Level............................................................... 33

■ Using the LNA (Low Noise Amplifier) feature (depending on the model) ...... 34

■ Activating the Child Lock ............................................................................... 35

■ Viewing an External Signal Source (depending on the model) ..................... 36

■ Viewing the Picture In Picture (PIP) (depending on the model) .................... 37

ENG

Contents (continued)

◆ USING THE TELETEXT FEATURE (depending on the model)

■ Teletext Feature (depending on the model) .................................................. 40

■ Displaying the Teletext Information (depending on the model) ..................... 40

■ Selecting a Page by Number (depending on the model)............................... 41

■ Using FLOF to Select a Page (depending on the model).............................. 42

■ Storing Teletext Pages (depending on the model) ........................................ 42

◆ ADDITIONAL INFORMATION ON CONNECTIONS

■ Connecting to the AV-1 or 2 Input/Outputs.................................................... 43

■ Connecting to the S-VIDEO Input (depending on the model)........................ 43

■ Connecting to the DVD Input (depending on the model)............................... 44

■ Connecting to the RCA Input (depending on the model)............................... 44

■ Connecting to the Audio Output (depending on the model) .......................... 44

■ Connecting Headphones (depending on the model)..................................... 45

■ Viewing Pictures From External Sources (depending on the model) ............ 45

◆ RECOMMENDATIONS FOR USE

■ Automatic Degaussing to Remove Colour Patches....................................... 46

■ Troubleshooting: Before Contacting Service Personnel................................ 46

Symbols

Press Important Note

☛

➢

Control Panels (depending on the model)

The actual configuration on your TV may be different, depending on

➢

your model.

Front of the TV

ENG

1) Input source selection

2) Menu display

3) Volume adjustment

4) Channel selection

Using the Buttons on the Panel

➢

If the remote control no longer works or you have lost it, you can use controls on the panel of the TV to:

◆

Switch on the TV when it is in Standby mode and select channels ( ▼ CH ▲ or CH ).

◆

Access the menu ( MENU ).

◆

Adjust the volume ( - VOL+).

◆

Switch among Video input modes ( TV/VIDEO ).

5) Remote control sensor

6) Standby indicator

7) Power On/Off

ENG

Connection Panels (depending on the model)

This figure shows the Standard Connector-jack panel.

➢

The actual configuration on your TV may be different, depending on the model.

Side of TV Front of TV

Œ CONNECTING EXTERNAL A/V DEVICES (INPUT)

The RCA (VIDEO + AUDIO-L and R) connectors are used for equipment such as camcorders, video disc players and some video game devices.

◆ When both the side (or front) and rear connectors are connected to external equipment,

➢

the side (or front) AV has the priority.

◆ When using the mono equipment such as camcorders, video disc players and some video game devices, connect to the “AUDIO-L” input connector.

´ CONNECTING EXTERNAL S-VIDEO DEVICES (INPUT) (Option)

Video and audio inputs for external devices with an S-Video output, such as a camcorder or VCR.

ˇ CONNECTING HEADPHONES (Option)

You can connect a set of headphones to your television if you wish to watch a television programme without disturbing the other people in the room.

Prolonged use of headphones at a high volume may damage your hearing.

Whenever you connect an audio or video system to your

☛

television, ensure that all

Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.

elements are switched off.

Connection Panels (depending on the model) (continued)

Rear of TV

ENG

MONITOR OUT (VIDEO / L-AUDIO-R) Outputs for external devices.

´ AV 1 (VCR) -VIDEO/AUDIO(L/R)

AV 2 (VCR) -VIDEO/L-AUDIO-R

Inputs or outputs for external devices, such as VCR,DVD, video game device or video disc players.

ˇ COMPONENT (DVD)

VIDEO (Y/Pb/Pr) and AUDIO (L/R) inputs for Component.

Available format for Component Inputs : 480i

➢

When using the mono equipment such as camcorders, video disc players and some video

➢

game device, connect to the “AUDIO-L” input connector.

¨ VHF/UHF (75Ω)

75Ω Coaxial connector for Aerial/ Cable Network.

ˆ / (SCART)

Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

ENG

Infrared Remote Control

TELEVISION STAND-BY

TELETEXT SIZE SELECTION

SOUND MODE SELECTION/

DIRECT CHANNEL SELECTION

PICTURE SIZE/

TELETEXT SUB-PAGE

TELETEXT DISPLAY/ MIX BOTH TELETEXT INFORMATION AND THE NORMAL BROADCAST

AUTOMATIC SWITCH-OFF/ TELETEXT STORE

ONE/TWO-DIGIT CHANNEL

TELETEXT PAGE HOLD

TEMPORARY SOUND SWITCH-OFF

TUNER/CABLE NETWORK

PROGRAMME SELECTION BY NAME

MOVE TO THE REQUIRED MENU

ADJUST AN OPTION VALUE

SOUND MENU DISPLAY

FASTEXT TOPIC SELECTION

SELECTION/

VOLUME INCREASE

VOLUME DECREASE

SELECTION

MENU DISPLAY/

OPTION/

RESPECTIVELY

TURBO SOUND

SWITCH REPEATEDLY BETWEEN THE LAST TWO CHANNELS DISPLAYED

NEXT CHANNEL/ TELETEXT NEXT PAGE

EXTERNAL INPUT SELECTION/ TELETEXT MODE SELECTION (LIST/FLOF)

PREVIOUS CHANNEL/ TELETEXT PREVIOUS PAGE

INFORMATION DISPLAY/ TELETEXT REVEAL

EXIT FROM ANY DISPLAY

CHANGE CONFIRMATION

SOUND EFFECT SELECTION

PICTURE EFFECT SELECTION

PIP FUNCTIONS (OPTION);

- PIP ON/OFF

- STILL

- INTERCHANGE THE MAIN AND SUB PICTURE (SWAP)

- SOURCE SELECTION (TV/VIDEO)

- SIZE SELECTION (SIZE)

- LOCATION SELECTION (POSITION)

- CHANNEL SELECTION (P / )

The performance of the remote control may be affected by bright light.

➢

Inserting the Batteries in the Remote Control

You must insert or replace the batteries in the remote control when you:

◆ Purchase the television

◆ Find that the remote control is no longer operating

correctly

1 Remove the cover on the rear of the remote control by pressing

the symbol

2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking

care to respect the polarities:

◆-on the battery against -on the remote control

◆+on the battery against +on the remote control

3 Replace the cover by aligning it with the base of the remote

control and pressing it back into place.

()

downwards and then pulling firmly to remove it.

ENG

Connecting to an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

◆ An outdoor aerial

◆ A cable television network

◆ A satellite network

Rear of the TV

P 4

Cable Television

Network

Mono

1 In the first three cases, connect the aerial or network input cable to

the 75Ω coaxial socket on the rear of the television.

2 If you are using an indoor aerial, you may need to turn it when

tuning your television until you obtain a picture that is both sharp and clear. For further details, refer to:

◆ “Storing Channels Automatically” on page 15.

◆ “Storing Channels Manually” on page 16.

Signal Strength( ) display (Option)

➢

The “ ”(Signal Strength) symbol is displayed by pressing the “INFO ( )” button. This symbol displays signal strength for your watching TV channel. The more signal bar is the better TV gets sensitivity on current channel.

Switching Your Television On and Off

The mains lead is attached to the rear of your television.

1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the television

➢

and the frequency is 50 or 60Hz.

2 Press the “ ” button (On/Off) on the front of the television.

Result

: The Standby indicator on the front of the television

lights up.

3 Press the POWER ( ) button on the remote control to switch the

television on.

Result

: The programme that you were watching last is re-

selected automatically.

If you have not yet stored any channels, No clear picture

➢

appears. Refer to “Storing Channels Automatically” on page 15 or “Storing Channels Manually” on page 16.

4 To switch your television off, press the “ ” button (On/Off) again.

ENG

Placing Your Television in Standby Mode

Your television can be placed in Standby mode, in order to reduce:

◆ Power consumption

◆ Wear of the cathode ray tube

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1 Press the POWER ( ) button on the remote control.

Result

: The screen is turned off and the Standby indicator on

the front of the television lights up in red.

2 To switch the television back on, simply press the POWER ()

button again.

You can also switch on by pressing the P or button.

➢

Do not leave your television in Standby mode for long

☛

periods of time (when you are away on holiday, for example). Turn your television off by pressing the “” button (On/Off) on the front of the television. It is best to unplug the set from the mains and aerial.

ENG

Becoming Familiar with the Remote Control

The remote control is used mainly to:

◆ Change channels and adjust the volume

◆ Set up the television using the on-screen menu system

The following table presents the most frequently used buttons and their functions.

Button Viewing Function Menu Function

Used to display the next stored channel.

Used to display the previous stored channel.

to Used to display the corresponding channels.

-/--

PRE-CH Press the PRE-CH button. The TV will switch to the last

MUTE Used to switch the sound off temporarily.

MENU Used to display the Used to return to the previous

Used to select a channel numbered ten or over. Press this button, and the “ Enter the two-digit channel number.

channel viewed. To quickly switch between two channels that are far apart,

tune to one channel, then use the number button to select second channel. Then, use the PRE-CH button to quickly alternate between them.

Used to increase the volume.

Used to decrease the volume.

To turn the sound back on, press this button again, or

➢

press the or button.

on-screen menu system. menu or normal viewing.

” symbol is displayed.

EXIT

TV ◆ Used to return the TV

mode when it is in external input mode.

Used to:

◆ Display a submenu containing selections for the current menu option

◆ Increase/decrease a menu option value

Used to confirm your choice.

Used to exit from the menu system and return to normal viewing directly.

Plug & Play Feature (depending on the model)

When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.

ENG

Plug & Play

1 If the television is in Standby mode, press the POWER ( ) button

on the remote control.

Result

: The message Plug & Play is displayed. It flickers for

a little while and then

Language menu is automatically

displayed.

2 Select the appropriate language by pressing the ▼ or ▲ button.

Press the

Result

➢

ENTER ( ) button to enter the language.

: The message Check antenna input. is displayed.

If any language is not selected on the Language menu, the Language menu will disappear about 30 seconds later.

3 Make sure that the antenna is connected to the TV.

Press the

Result

ENTER ( ) button.

: The Auto Store menu is displayed with Area is

selected.

4 Press the ENTER ( ) button again. Select your area by pressing

the

▼ or ▲ button, and then Press the ENTER ( ) button.

To search the channels, select

Search by pressing the ▼ or ▲

button, and then press the ENTER ( ) button. Press the Press the

Result

➢

ENTER ( ) button again to start search the channels. MENU ( ) button to stop the search.

: The Time menu is displayed with Clock is selected.

Refer to “Storing Channels Automatically” on page 15.

5 Press the œ or √ button to move to the hour or minute. Set the

hour or minute by pressing the

Refer to “Setting and Displaying the Current Time” on page

➢

30.

▼ or ▲ button.

6 When you have finished, press the MENU ( ) button.

Result

: The message Enjoy your watching is displayed,

and then the channel which has been stored will be activated.

7 If you want to reset this feature...

Language

English

Français

Türkçe

Move Enter

Check antenna input.

Enter Exit

Area : ASIA W/EUROPE

Move Enter Return

Clock -- : -- am

Sleep Timer : Off

On Timer -- : -- am Off

Off Timer -- : -- am Off

On Timer Volume : 10

Move Enter Return

Auto Store

Start

Enter Return

Time

√√ √√

1 Press the MENU ( ) button.

2 Press the ▼ or ▲ button to select Setup, and then press the

ENTER ( ) button.

Result

: The Plug & Play is selected.

3 Press the ENTER ( ) button again.

Result

: This feature starts with the message

Plug & Play

is displayed.

Enjoy your watching

Plug & Play Language : English Time Child Lock Blue Screen : Off Melody : On Demonstration

Move Enter Return

Setup

√√

√√ √√ √√ √√ √√

ENG

Viewing the Demonstration

Plug & Play Language : English Time Child Lock Blue screen : Off Melody : On Demonstration

Move Enter Return

Setup

To become familiar with the various menus provided by your television, you can view the in built demonstration.

√√

√√ √√ √√ √√ √√

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Setup.

Result

: The options available in the Setup group are

displayed.

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Demonstration.

5 Press the ENTER ( ) button.

Result

: Each of the menu options is displayed in turn.

When you wish to exit from the demonstration, press the

➢

EXIT ( ) button on the remote control.

Choosing Your Language

Plug & Play Language : English Time Child Lock Blue screen : Off Melody : On Demonstration

Move Enter Return

Setup

When you start using your television for the first time, you must select the language which will be used for displaying menus and indications.

√√

√√ √√ √√ √√ √√

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Setup.

Result

: The options available in the

Setup group are

displayed.

3 Press the ENTER ( ) button.

4 Press the ▼ or ▲ button to select Language.

5 Select the appropriate language by pressing the ENTER ()

button repeatedly.

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

Auto Store Manual Store Add/Delete Sort LNA : Off

ENG

Channel

√√ √√ √√ √√ √√

1 Press the MENU ( ) button.

Result

: The main menu is displayed.

2 Press the ▼ or ▲ button to select Channel.

Result

: The options available in the Channel group are

displayed.

3 Press the ENTER ( ) button.

Result

: The Auto Store is selected.

4 Press the ENTER ( ) button again.

Result

: The options available in the Auto Store group are

displayed with

Area is selected.

5 Press the ENTER ( ) button again.

6 Select your area by pressing the ▼ or ▲ button, then press the

ENTER ( ) button.

The areas are displayed in the following order:

ASIA W/EUROPE-CIS E/EUROPE-CHINA-HONGKONG U/K

AUSTRALIA-NZ/INDONESIA-SOUTH AFRICA-AMERICA

7 Press the ▼ or ▲ button to select Search, then press the ENTER

( ) button.

8 Press the ENTER ( ) button to start the search.

Result

: The horizontal bar is displayed, and then channels are

stored in an order which reflects their positions in the frequency range. Finally, the search will end automatically.

To stop the search before it has finished, press the MENU

➢

( ) button.

9 When searching and storing are complete, the Sort menu is

displayed.

◆

To sort the stored channels into the desired numerical order, go to Step on page 19.

◆

To exit from the channel store function without sorting the channels, press the menus disappear.

6 of the “Sorting the Stored Channels” procedure

MENU ( ) button repeatedly until the

Move Enter Return

Area : ASIA W/EUROPE

Move Enter Return

Area : ASIA W/EUROPE

Move Enter Return

P1 102 MHZ

From : P 1

To : P--

Store : ?

Auto Store

ASIA W/EUROPE

CIS E/EUROPE CHINA HONGKONG U/K AUSTRALIA NZ/INDONESIA SOUTH AFRICA AMERICA

Auto Store

Start

Enter Return

Stop

Enter Return

Sort

√√

√√ √√

10 When the channels have been stored, you can:

◆

Sort them in the order required (refer to page 19)

◆

Clear a channel (refer to page 18)

◆

Activate the Digital Noise Reduction feature (refer to page 23)

Move Adjust Return

ENG

Storing Channels Manually

Auto Store Manual Store Add/Delete Sort LNA : Off

Move Enter Return

Channel

You can store the channels, including those received via cable

√√ √√ √√ √√ √√

networks.

When storing channels manually, you can choose:

◆ Whether or not to store each of the channels found

◆ The programme number of each stored channel which

you wish to identify

Programme : P 3

Color System : AUTO

Sound System : BG

Search : 46MHz

Channel : C 1

Store : ?

Move Adjust Return

Programme : P 3

Color System : AUTO

Sound System : BG

Search : 46MHz

Channel : C 1

Store : ?

Move Enter Return

Programme : P 3

Color System : Auto

Sound System : BG

Search : 46MHz

Channel : P 1

Store : ?

Move Enter Return

Programme : P 3

Color System : AUTO

Sound System : BG

Search : 46MHz

Channel : C 1

Store : ?

Move Enter Return

Programme : P 3

Color System : AUTO

Sound System : BG

Search : 46MHz

Channel : C 1

Store : ?

Move Enter Return

Manual Store

AUTO

PAL SECAM NT4.43 NT3.58

Manual Store

DK I M

1 Press the MENU ( ) button.

Result

√√ √√

2 Press the ▼ or ▲ button to select Channel.

: The main menu is displayed.

3 Press the ENTER ( ) button.

Result

: The options available in the Channel group are

displayed.

4 Press the ▼ or ▲ button to select Manual Store.

√√ √√

5 Press the ENTER ( ) button.

6 To assign a programme number to a channel, press the œ or √

button.

7 Press the ▼ or ▲ button to select Color system.

8 Press the ENTER ( ) button.

9 Press the ▼ or ▲ button to select the broadcasting standards.

√√

Result

: The color standards are displayed in the following

order: AUTO-PAL-SECAM-NT4.43-NT3.58.

10 Press the ENTER ( ) button.

11 Press the ▼ or ▲ button to select Sound System .

12 Press the ENTER ( ) button.

√√ √√

13 Press the ▼ or ▲ button to select the sound standards.

Result

: The sound standards are displayed in the following

order:

BG-DK-I-M.

14 Press the ENTER ( ) button.

√√

+ 32 hidden pages