Samsung CS21A730E3, CS21Z47Z3Q, CS21Z43Z3Q, CS21Z50Z3Q, CS21Z57Z3Q Owner's Instructions Manual
...
English - 1
➢
The actual configuration of your TV may be different,
depending on your model.
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1 (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when turning your television until you obtain a picture that is
both sharp and clear.
Connecting to the SCART Output
The SCART2 and SCART3 connectors are used for
equipment, such as a recording VCR or audio system.
Connecting to the SCART Input
The SCART2 and SCART3 connectors are used for
equipment, such as a VCR, DVD, decoder, satellite receiver,
video game device, or video disc player.
☛
Please be sure to match the colour coded input terminals
and cable jacks.
Connecting to the RCA Input
The 1 (AUDIO-L/R) and 2 (VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.
Connecting Headphones
The 3 (headphone) jack is used for watching a television
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
➢
When both the front (or side) AV and rear connectors
are connected to external equipment, the front (or
side) AV receives priority.
You can use the 3 buttons to switch the TV on when it is
in standby mode depending on the model.
The 2 and 3 buttons also have the same function as
the ◄/►/▲/▼buttons on the remote control.
If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
Front (or Side) Panel
1 On-screen menu display
2 Volume adjustment
3 Channel selection
4 Remote control sensor
5 Indicator
6 Power on/off
AA68-03971A-00
cable
television
network
Rear Panel
or
1 Audio input
2 Video input
3 Headphone input
Front (or Side) Panel
Control Panel (depending on the model)
➢
The product color and shape may vary depending on the
model.
COLOR TELEVISION
Owner’s Instructions
Before operating, please read this manual carefully,
and retain it for future reference.
Register your product at
www.samsung.com/global/register
CS21Z45Z3Q/CS21Z47Z3Q/
CS21A730E3/CS21Z43Z3Q/
CS21Z50Z3Q/CS21Z57Z3Q/
CS21Z55Z3Q/CS21Z58Z3Q
Connection Panel
AA68-03971A-00Eng.indd 1 2008-04-15 오전 11:32:54
English - 2
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
2 Press the “I” button (On/Off) on the front (or side) of the
television.
3 Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to “Channel - Auto Store” on page 3 or “Channel Manual Store” on page 4.
➢
If the television is initially powered on, several basic
customer settings proceed automatically. Refer to
“Setup - Plug & Play” on page 3.
4 To switch the television off, press the “I” button (On/Off)
on the front (or side) of the television.
Switching the Television On and Off
The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1 Press the POWER button on the remote control while
viewing.
The television is in standby mode.
2 To switch the television back on, simply press it again.
☛
Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the “I”
button (On/Off) on the front (or side) of the television. It is
best to unplug the set from the mains and aerial.
Placing the Television in Standby Mode
1 POWER
Used to switch the TV
on and off.
2 Numeric buttons
Used to select channels
directly.
3 -/--
Used to select a
channel numbered ten
or over.
Press this button, then
“--” symbol is displayed.
Enter the two-digit
channel number.
4
2
1
/
Used to increase or
decrease the volume.
5 MENU
Used to display the
on-screen menu or
return to the previous
menu.
6 ▲/▼/◄/►
Used to control the
cursor in the menu.
7 S.MENU
Used to display the
sound menu.
8 TURBO
Used to select the turbo
sound option.
9 DUAL I-II
Used to select the
sound mode.
0 SOURCE
Used to display all of
the available video
sources.
! INFO
Used to view the
channel information
and setting status you
selected.
@ PRE-CH
Used to switch
repeatedly between
the last two channels
displayed.
# P /
Used to display the
next or previous stored
channel.
$ EXIT
Used to exit from any
display or return to
normal viewing.
% MUTE
Used to switch the
sound off temporarily.
To turn the sound back
on, press the MUTE,
, or button.
^ ENTER
While using the
on-screen menus, press
the ENTER button to
activate (or change) a
particular item.
& S.MODE
Used to select the
sound effect.
* P.MODE
Used to select the
picture effect.
( TV
Used to return to the
TV mode when it is in
external input mode.
) EZ.VIEW
Used to display
Channel Grouping,
Channel Minimizer,
Channel Schedule,
Music Mode, Half Mute
menu.
Remote Control (depending on the model)
➢
Operation of remote control may be affected by bright
artificial light near to the TV.
Installing Batteries
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not
operate normally, check that the “+
” and “–” ends of the batteries are inserted correctly or the
batteries are drained.
➢
Do not mix battery types, i.e. alkaline and manganese.
AA68-03971A-00Eng.indd 2 2008-04-15 오전 11:32:56
English - 3
Viewing the Menus
1 Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
2 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the ◄/►/▲/▼ button to change the selected
items. Press the MENU button to return to the previous
menu.
5 Press the EXIT button to exit from the menu.
Setup - Plug & Play
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1 If the television is in standby
mode, press the POWER
button on the remote control.
The Start Plug & Play
is displayed. To start Plug
& Play, press the ENTER
button. The Language menu
is displayed.
➢
The Language menu
will automatically appear
after several seconds,
even if the ENTER button
is not pressed.
2 Select the appropriated language by pressing the
▲ or ▼ button. Press the ENTER button.
The Check antenna input.
is displayed.
➢
If any language is not
selected, the language
menu will disappear about
30 seconds later.
continued...
3 Make sure that the antenna
is connected to the
television (refer to page 1).
Press the ENTER button.
The Area menu is displayed.
4 Press the▲ or ▼ button to
select your area. Press the
ENTER button.
5
To search the channels, press
the ENTER button. To stop
the search, press the ENTER
button.
When the channel searching
has finished, the Clock Set
menu is displayed.
6
Press the ◄ or ► button to
move to the hour or minute.
Set the hour or minute by
pressing the ▲ or ▼ button.
7
When you have finished,
press the MENU button.
The Enjoy your watching.
is displayed, and then the
channel which has been
stored will be activated.
Re-setting the Plug & Play
Method
MENU ▲/▼ (Setup)
ENTER ▲/▼ (Plug & Play)
ENTER
Source List
You can switch between
viewing signal from
connected equipment, such
as a VCR, DVD, set-top
box, and the TV source
(broadcast or cable).
➢
You can change the required external source simply
by pressing the SOURCE button on the remote
control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the TV button on the remote control.
Input - Source List
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or
desired programme numbers. However you can sort
numbers manually and clear any channels you do not wish
to watch.
Channels are sorted and stored
in the order which reflects their
position in the frequency range
(with lowest first and highest
last). The programme originally
selected is then displayed.
➢
To stop the search
before it has finished,
press the ENTER
button.
When finished, the Sort menu
is displayed. To sort the stored
channels into the desired
numerical order, refer to “Channel - Sort”.
To exit without sorting, press the EXIT button.
Channel - Auto Store
This operation allows you to
change the programme numbers
of stored channels. This
operation may be necessary
after using auto store.
◆ From: Channel number to
be changed.
◆ To: New channel number to be identified.
◆ Store: Confirmation the exchange of channel numbers.
Channel - Sort
Plug & Play
Enter
Exit
OK
Start Plug & Play.
Plug & Play
Enter
Skip
OK
Check antenna input.
Plug & Play
Move Enter Skip
Language
English
Русский
Plug & Play
Move Enter Skip
Country
Belgie
Deutschland
España
France
Italia
Nederland
Schweiz
Sverige
UK
E. Europe
Others
OK
Enjoy your watching.
Search
Enter
Return
Stop
P 1 C-- 102MHz
7 %
Move Enter Return
Auto Store
TV
Country
Search
Belgie
Deutschland
España
France
Italia
Nederland
Schweiz
▼
Setup
TV
Plug & Play
►
Language : English
►
Time
►
Child Lock
►
Blue Screen : On
►
Melody : On
►
Music Mode : Off
►
Move Enter
Return
Plug & Play
Auto Store
Start
Enter
Skip
Auto Store
P 1 C-- 102MHz
7 %
Enter
Skip
Plug & Play
Stop
Move
Enter
Adjust
Skip
Plug & Play
Clock Set 00 : 0 0
Move Adjust Return
Sort
TV
From : P 1
To : P-Store : ?
Source List
TV
EXT1
EXT2
TV
Move Enter
Return
AA68-03971A-00Eng.indd 3 2008-04-15 오전 11:32:57
Loading...