Samsung CS21Z47Z3Q, CS21A730E3, CS21Z50Z3Q, CS21Z43Z3Q, CS21Z57Z3Q Owner's Instructions Manual
...
English - 1
You can use the 3 buttons to switch the TV on when it is
in standby mode depending on the model.
The 2 and 3 buttons also have the same function as
the ◄/►/▲/▼buttons on the remote control.
If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
Front (or Side) Panel
1 On-screen menu display
2 Volume adjustment
3 Channel selection
4 Remote control sensor
5 Indicator
6 Power on/off
AA68-03972K-00
Control Panel (depending on the model)
➢
The product color and shape may vary depending on the
model.
COLOR TELEVISION
Owner’s Instructions
Before operating, please read this manual carefully,
and retain it for future reference.
Register your product at
www.samsung.com/global/register
CS21Z45Z3Q/CS21Z47Z3Q/
CS21A730E3/CS21Z43Z3Q/
CS21Z50Z3Q/CS21Z57Z3Q/
CS21Z55Z3Q/CS21Z58Z3Q/
CS21B850F3/CS21A751J3/
CS21A750JL
Connection Panel (depending on the model)
➢
The product colour and shape may vary depending on the
model.
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1 (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor aerial,
cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the SCART Input/Output
The SCART2 connectors are used for equipment, such as a
VCR, DVD, decoder, satellite receiver, video game device, or
video disc player.
The SCART2 is also used for equipment with an RGB
output, such as a video game device or video disc player.
Connecting to the RCA Input
The 1 (AUDIO-L/R or AUDIO) and 2 (VIDEO) connectors
are used for equipment, such as a camcorder, video disc
player, or video game device.
Connecting Headphones
The 3 (headphone) jack is used for watching a television
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
➢
When both the front (or side) AV and rear connectors are
connected to external equipment, the front (or side) AV
receives priority.
Rear Panel
cable television
network
or
Front (or Side) Panel
1 Audio input
2 Video input
3 Headphone jack
AA68-03972K.indd 1 2009-08-13 �� 10:47:42
Remote Control (depending on the model)
➢
Operation of remote control may be affected by bright
artificial light near to the TV.
4 MUTE
Used to switch the
sound off temporarily.
To turn the sound
back on, press the
MUTE,
= + or = - button.
5 Numeric buttons
Used to select
channels directly.
6 INFO
Used to view the
channel information
and setting status you
selected.
7 SOURCE
Used to display all of
the available video
sources.
8 TOOLS (depending on
the model)
You can check the
following selection by
pressing Tools button.
1. Sleep Timer(Used
to select a preset
time interval for
automatic turn off.)
2. Picture Mode(Used
to select the picture
effect.)
3. Sound Mode(Used
to select sound
effect.)
4. Dual I-II(Used
to select sound
mode.)
5. Turbo Sound(Used
to select the turbo
sound option.)
6. Sound Adjust
(Used to display the
sound menu)
7. Easy View
Used to display
Channel Grouping,
Channel Minimizer,
Channel Scheduler,
Music Mode, Half
Mute menu.
9 ENTER
While using the on-
screen menus, press
the ENTER button to
activate (or change) a
particular item.
0 EXIT
Used to exit from any
display or return to
normal viewing.
! PRE-CH
Used to switch
repeatedly between
the last two channels
displayed.
Installing Batteries
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not operate
normally, check that the “+” and “–” ends of the
batteries are inserted correctly or the batteries
are drained.
➢
Do not mix battery types, i.e. alkaline and manganese.
1 POWER
Used to switch the TV
on and off.
2 MENU
Used to display the
on-screen menu or
return to the previous
menu.
3 ▲/▼/◄/►
Used to control the
cursor in the menu.
P < / >
Used to display the
next or previous
stored channel
= + / -
Used to increase or
decrease the volume.
continued...
Turning the TV On and Off
Press the “ POWER ” button,or P</> button, or Numeric
button on the remote control. You can also use the “ P ”
button on the TV.
➢
Caution: One pole switch is totally not off (one line still live)
if power cord is not unplugged.
AA68-03972K.indd 2 2009-08-13 �� 10:47:42
English - 2
English - 3
Viewing the Menus
1 Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
2 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the ◄/►/▲/▼ button to change the selected
items. Press the MENU button to return to the previous
menu.
5 Press the EXIT button to exit from the menu.
Setup - Plug & Play
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1 If the television is in standby
mode, press
the POWER
button on the remote control.
The Start Plug & Play
is displayed. To start Plug
& Play, press the ENTER
button. The Language menu
is displayed.
➢
The Language menu
will automatically appear
after several seconds,
even if the ENTER button
is not pressed.
2 Select the appropriated language by pressing the
▲ or ▼ button. Press the ENTER button.
The Check antenna input.
is displayed.
➢
If any language is not
selected, the language
menu will disappear about
30 seconds later.
continued...
3 Make sure that the antenna
is connected to the
television (refer to page 1).
Press the ENTER button.
The Area menu is displayed.
4 Press the▲ or ▼ button to
select your area. Press the
ENTER button.
5 To search the channels,
press the ENTER button. To
stop the search, press the
ENTER button.
When the channel searching
has finished, the Clock Set
menu is displayed.
6 Press the ◄ or ► button to
move to the hour or minute.
Set the hour or minute by
pressing the ▲ or ▼ button.
7 When you have finished,
press the MENU button.
The Enjoy your watching.
is displayed, and then the
channel which has been
stored will be activated.
Re-setting the Plug & Play
Method
MENU ▲/▼ (Setup)
ENTER ▲/▼ (Plug & Play)
ENTER
Source List
You can switch between
viewing signal from
connected equipment, such
as a VCR, DVD, set-top
box, and the TV source
(broadcast or cable).
➢
You can change the required source simply by
pressing the SOURCE button on the remote control.
It might take a short period of time for pictures to be
switched.
Input - Source List
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or
desired programme numbers. However you can sort
numbers manually and clear any channels you do not wish
to watch.
Channels are sorted and stored
in the order which reflects their
position in the frequency range
(with lowest first and highest
last). The programme originally
selected is then displayed.
➢
To stop the search
before it has finished,
press the ENTER
button.
When finished, the Sort menu
is displayed. To sort the stored
channels into the desired
numerical order, refer to “Channel - Sort”.
To exit without sorting, press the EXIT button.
Channel - Auto Store
This operation allows you to
change the programme numbers
of stored channels. This
operation may be necessary
after using auto store.
◆ From: Channel number to
be changed.
◆ To :
New channel number to be identified.
◆ Store:
Confirmation the exchange of channel numbers.
Channel - Sort
Plug & Play
Enter Exit
OK
Start Plug & Play.
Plug & Play
Enter Skip
OK
Check antenna input.
Plug & Play
Move Enter Skip
Language
English
Русский
Plug & Play
Move Enter Skip
Country
Belgie
Deutschland
España
France
Italia
Nederland
Schweiz
Sverige
UK
E. Europe
Others
OK
Enjoy your watching.
Search
Enter
Return
Stop
P 1 C-- 102MHz
7 %
Move Enter Return
Auto Store
TV
Country
Search
Belgie
Deutschland
España
France
Italia
Nederland
Schweiz
▼
Setup
TV
Plug & Play
►
Language : English
►
Time
►
Child Lock
►
Blue Screen : On
►
Melody : On
►
Music Mode : Off
►
Move Enter
Return
Plug & Play
Auto Store
Start
Enter
Skip
Auto Store
P 1 C-- 102MHz
7 %
Enter
Skip
Plug & Play
Stop
Move
Enter
Adjust
Skip
Plug & Play
Clock Set 00:00
Move Adjust Return
Sort
TV
From : P 1
To : P-Store : ?
Source List
TV
Ext.
TV
Move Enter
Return
AA68-03972K.indd 3 2009-08-13 �� 10:47:43
Loading...