Samsung CL21Z50, CL21Z57, CLZ58, CL21Z530, CL21A730 User Manual

COLOR TELEVISION
CL21Z43/21Z50/21Z57/21Z58/ 21A530/21A730

Connection Panel (depending on the model)

The product color and shape may vary depending on the
model.
Rear Jack
Side Jack
Owner’s Instructions
Before operating, please read this manual carefully,
Register your product at www.samsung.com/global/register.
and retain it for future reference.
Record your Model and Serial number.
▪ Model __________ ▪ Serial No. __________

Control Panel (depending on the model)

The product color and shape may vary depending on the
model.
Front Panel
1 On-screen menu display 2 Volume adjustment 3 Channel selection 4 Remote control sensor 5 Indicator (Standby or Timer) 6 Power on/off
The 2 and 3 buttons also have the same function as the
◄/►/▲/▼ buttons on the remote control.
If the remote control no longer works or you have
1
2
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks.
1 Audio/Video Output Jacks
Connect to the audio/video input jacks of a recording VCR.
2 Audio/Video Input Jacks
Connect to the audio/video output jacks of VCRs, DVD players and similar devices.
3 Component Video Input Jacks (Y, PB, PR)
Connect to the Component video outputs of a DVD or DTV set-top box. 480i video signal input is available. When using the Component Video input, connect audio jacks to “AV IN 2 (AUDIO-L/R)”.
4 ANT IN
Connect to an antenna or to a cable TV system.
3
3
4
1
2 3
Please be sure to match the color coded input terminals
and cable jacks. When both the side and rear jacks (AV IN 2) are connected to external equipment, the side receives priority.
1 Audio Input Jacks
Connect audio signals from a camcorder or video game.
2 Video Input Jack
Connect a video signal from a camcorder or video game.
3 Headphone Jack
Connect a set of external headphones to this jack for private listening.
English - 1
AA68-03806S-01

Remote Control (depending on the model)

Turning the TV On and Off

Operation of remote control may be affected by bright
artificial light near to the TV.
This is a special remote control for the visually impaired,
and has Braille points on the POWER, Channel and Volume buttons.
1 POWER
Turns the TV on and off.
2 Number buttons
Press to select channels directly on the TV.
3
Press to select channels over 100. For example, for channel 122, press “-”, then “2”, then “2”.
4 VOL +, VOL -
Press to increase or decrease the volume.
5 MENU
Displays the main on-screen menu.
6 ▲/▼/◄/►
Controls the cursor in the menu.
7 ENTER
While using the on-screen menus, press activate (or change) a particular item.
8 MTS
(Multi-channel Television Sound) Press to choose “Stereo”, “Mono”, or “SAP” (Secondary Audio Program).
ENTER to
9 R.SURF
Press to automatically return to a preferred channel after a userpreset time delay.
0 SOURCE
Press to display all of the available video sources.
! INFO
Press to display information on the TV screen.
@ PRE-CH
Tunes to the previous channel.
# CH , CH
Press to change channels.
$ EXIT
Press to exit the menu.
% MUTE
Press to temporarily cut off the sound.
^ SLEEP
Press to select a preset time interval for automatic shut off.
Press the POWER button on the remote control. You can also use the POWER button on the TV.

Viewing the Menus

1 Press the MENU button.
The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and “Setup”.
2 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the ▲/▼/◄/► button to change the selected items.
Press the MENU button to return to the previous menu.
5 Press the EXIT button to exit from the menu.
Installing Batteries
Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate normally, check that the “+” and “–” ends of the batteries are inserted correctly or the batteries are drained.
Do not mix battery types, i.e. alkaline and manganese.
English - 2
English - 3

Setup - Plug & Play

Input - Source List / Edit Name

When the TV is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.
1 Press the POWER button
on the remote control. The message “Plug & Play” is displayed. It flickers for a little while and
Plug & Play
then Language menu is automatically displayed.
2 Press the ◄ or ► button to
select the language, then press the MENU button. The message “Ant input check” is displayed.
Time
Plug & Play
Caption
Language : English
▼ More
Setup
Adjust Skip
3 Make sure that the antenna
is connected to the TV. Press the ENTER button,
Ant input check
then the “Channel” is displayed.
4 Press the ◄ or ► button to
select “Air”, “STD”, “HRC”, or “IRC”, then the MENU button. The message “Auto Program” is displayed.
Auto Program Skip
Auto Program
Add/Delete : Deleted ►
Air/CATV : Air
Name :
Adjust Skip
Channel
----
6 After all available channels
are stored, the “Time” is displayed. Press the ENTER button. Press the ◄ or ► button to move to the hour or minute. Set the clock by pressing the ▲ or ▼ button.
6 When you have finished,
press the MENU button. The “Enjoy your watching.” is displayed.
Plug & Play feature
doesn’t work in the AV mode.
Re-setting the Plug & Play
Method: MENU ▲/▼ (Setup) ENTER ▲/▼ (Plug & Play) ENTER
Clock -- : -- am
On Timer
Off Timer
Sleep Timer : Off
On Timer Volume : 10
Move Enter Return
Enjoy your watching
Time
Plug & Play
Caption
Language : English
▼ More
Move Enter Return
Time
-- : -- am Off
-- : -- am Off
Setup
Source List
You can switch between viewing signal from connected equipment, such as a VCR, DVD, set-top
TV
AV1
AV2
Component
box, and the TV source (broadcast or cable).
Press the SOURCE
button on the remote control repeatedly to select the
Move Enter Return
desired signal source.
Edit Name
You can give a name to the external source.
AV1 : -- --
AV2 :
Component :
Move Enter Return
Source List
-- --
-- --
-- --
Edit Name
-- --
VCR DVD
-- --
Cable STB Sat. STB
-- --
AV Recv. DVD Recv. Game Camcorder DVD Combo
5 Press the ENTER button to
select “Start”. The TV will begin memorizing all of the available channels. Press the
ENTER button to stop.
Auto Program
Air 7
Start
Enter Skip
continued...
Loading...
+ 5 hidden pages