Samsung CL25M5W User Manual

Owner’s Instructions

COLOR TELEVISION

.............................................................................................................................

.............

CL21M6W/CL25M6W CL29M6W/CL29M9W CL29V5W/CL25M5W CL29M5W

AA68-02585B-00 (ENG)

Warning! Important

Safety Instructions

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.

This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

Note to CATV system installer: This reminder is provided to call CATV system installer’s attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

Important: One Federal Court has held that unauthorized recording of copyrighted TV programs is an infringement of U.S. copyright laws.

Certain Canadian programs may also be copyrighted and any unauthorized recording in whole or in part may be in violation of these rights.

To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AFETY

Thank You for Choosing Samsung

Thank you for choosing Samsung! Your new Samsung TV receiver represents the latest in television technology. It has easy-to-use, on-screen menus and closed-captioning capabilities, making this TV one of the best products in its class. This product will provide convenient, dependable service and enjoyment for years to come.

Important Safety Information

To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine.

• Read all safety and operating instructions before operating the TV receiver.

• Retain the safety and operating instructions for future reference.

• Heed all warnings on the TV receiver and in the operating instructions.

• Follow all operating instructions.

• Unplug the TV receiver from the wall outlet before cleaning, Use a damp cloth, Do not use liquid or aerosol cleaners.

• Never add any attachments and/or equipment without approval of the manufacturer. Such additions may cause risk of fire, electric shock, or other personal injury.

• Do not use the TV receiver where contact with or immersion in water is a possibility, such as near bath tubs, sinks, washing machines, swimming pools, etc.

• Do not place the TV receiver on an unstable cart, stand, tripod, bracket, or table. The TV receiver may fall, causing injury to people and/or damage to the TV. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the TV receiver.

• Follow the manufacturer’s instructions when mounting the unit, and use a mounting accessory recommended by the manufacturer. Move the TV receiver and its cart with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart to overturn.

• Provide ventilation for the TV receiver. The unit is designed with slots in the cabinet for ventilation to protect it from overheating. Do not block these openings with any object, and do not place the TV receiver on a bed, sofa, rug, or other similar surface. Do not place it near a radiator or heat register. If you place the TV receiver on a rack or bookcase, ensure that there is adequate ventilation and that you’ve followed the manufacturer’s instructions for mounting.

• Operate your TV receiver only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appliance dealer or local power company.

• Use only a grounded or polarized outlet. For your safety, this TV is equipped with a polarized alternating-current line plug having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact your electrician to replace your outlet.

• Protect the power cord. Power supply cords should be routed so that they will not be walked on or pinched by items placed on or against them. Pay particular attention to cord placement at plugs, convenience receptacles, and at the point where they exit from the unit.

• Unplug the TV receiver from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-line surges.

• An outside antenna system should not be placed in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits. Avoid overhead power lines: When installing an outside antenna system, be extremely careful to keep from touching the power lines or circuits. Contact with such lines might be fatal.

• Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.

• Do not insert foreign objects through openings in the unit, as they may touch dangerous voltages or cause damage. Never spill liquid of any kind on the TV receiver.

• Ground outdoor antennas. If an outside antenna or cable system is connected to the TV receiver, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Read information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

• Do not attempt to service the TV receiver yourself. Refer all servicing to qualified service personnel. Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following conditions:

- When the power-supply cord or plug is damaged

- If liquid has been spilled on the unit or if objects have fallen into the TV

- If the TV receiver has been exposed to rain or water

- If the TV receiver does not operate normally by following the operating instructions

- If the TV receiver has been dropped or the cabinet has been damaged

- When the TV receiver exhibits a distinct degradation in performance

• If you make adjustments yourself, adjust only those controls that are covered by the operating instructions. Adjusting other controls may result in damage and will often require extensive work by a qualified technician to restore the TV receiver to normal.

• When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in additional damage to the unit.

• Upon completion of any service or repairs to this TV receiver, ask the service technician to perform safety checks to determine that the TV receiver is in a safe operating condition.

AFETY

EXAMPLE OF ANTENNA GROUNDING

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

POWER SERVICE GROUNDING ELECTRODE SYSTEM

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

GROUNDING CONDUCTORS

GROUND CLAMPS

ONTENTS

CONTENTS

Chapter 1: Your New TV . . . . . . . . . . . . . . .1.1

List of Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1

Familiarizing Yourself with The TV. . . . . . . . . . . . . . . . . . . . . . . . . . 1.2

Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2

Side Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3

Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5

Chapter 2: Installation . . . . . . . . . . . . . . . . 2.1

Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . 2.1

Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . 2.1

Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . 2.2

Separate VHF and UHF Antennas. . . . . . . . . . . . . . . . . . . . 2.2

Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2

Cable without a Cable Box. . . . . . . . . . . . . . . . . . . . . . . . . 2.2

Connecting to a Cable Box that Descrambles

All Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3

Connecting to a Cable Box that Descrambles

Some Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3

Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4

Connecting an S-VHS VCR. . . . . . . . . . . . . . . . . . . . . . . . . 2.6

Connecting a Second VCR to Record from the TV . . . . . . . 2.7

Connecting a DVD Player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7

Connecting a Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.8

Installing Batteries in the Remote Control. . . . . . . . . . . . . . . . . . . . . 2.9

Chapter 3: Operation. . . . . . . . . . . . . . . . . . 3.1

Turning the TV On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1

Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1

Viewing the Menus and On-Screen Displays. . . . . . . . . . . . . . . . . . . 3.3

Viewing the Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3

Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3

Selecting a Menu Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4

Memorizing the Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5

Selecting the Video Signal-source. . . . . . . . . . . . . . . . . . . . 3.5

Storing Channels in Memory (Automatic Method). . . . . . . 3.6

Adding and Erasing Channels (Manual Method) . . . . . . . . 3.7

Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8

Using the Channel Buttons. . . . . . . . . . . . . . . . . . . . . . . . . 3.8

Directly Accessing Channels. . . . . . . . . . . . . . . . . . . . . . . . 3.8

Using the PRE-CH Button to select the Previous Channel. . 3.8

CONTENTS

Chapter 3: Operation (Cont...) . . . . . . . . . . 3.8

Adjusting the Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8

Using Mute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8

Labeling the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.10

Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.11

Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.12

Customizing the Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.13

Using Automatic Sound Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.14

Setting The On/Off Melody. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.15

Viewing a VCR or Camcorder Tape. . . . . . . . . . . . . . . . . . . . . . . . . . 3.16

Chapter 4: Special Features . . . . . . . . . . . . 4.1

Customizing Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1

Setting Up Your Remote Control to Operate Your VCR. . . . 4.1

Setting Up Your Remote Control to Operate Your Cable Box

. . 4.3

Fine Tuning Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4

Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5

Digital Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6

Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7

Using the Surf Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8

Setting the On/Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9

Setting the Sleep Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10

Sound Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11

Choosing a Multi-Channel Sound (MTS) Soundtrack. . . . . 4.11

Extra Sound Settings

(Turbo Sound, Surround, or Auto Volume) . . . . . . . . . . . . 4.12

Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.13

Viewing the Demonstration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.14

Chapter 5: Troubleshooting . . . . . . . . . . . . 5.1

Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . A.1

Cleaning and Maintaining Your TV. . . . . . . . . . . . . . . . . . . . . . . . . . A.1

Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . . . . A.1

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A.1

CHAPTER ONE: YOUR NEW TV 1.1

List of Features

Your TV was designed with the latest technology. This TV is a high-performance unit that includes the following special features:

• Easy-to-use remote control

• Easy-to-use on-screen menu system

• Automatic timer to turn the TV on and off

• Adjustable picture and sound settings that can be stored in the TV’s memory

• Automatic channel tuning for up to 181 channels

• A special filter to reduce or eliminate reception problems

• Fine tuning control for the sharpest picture possible

• Built-in, dual channel speakers

• A special sleep timer

Chapter One

YOUR NEW TV

1.2 CHAPTER ONE: YOUR NEW TV

Familiarizing Yourself with The TV

Front Panel Buttons

The buttons on the front panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.

YOUR NEW TV

Press to see an on-screen menu of your TV's features.

VOL – , +

Press to increase or decrease the volume. Also used to select items on the on-screen menu.

CH ▼ and CH ▲

Press to change channels. Also press to select various items on the on-screen menu.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

STAND BY indicator

Lights up when you turn the power off.

POWER

Press to turn the TV on and off.

CL21M6W/CL25M6W/CL29M6W/CL25M5W/CL29M5W

CL29M9W

CL29V5W

CHAPTER ONE: YOUR NEW TV 1.3

YOUR NEW TV

Side Panel Jacks

You can use the Side panel jacks to connect an A/V component that is used only occasionally, such as a camcorder or video game. (For information on connecting equipment, see pages 2.1 – 2.8.)

AUDIO INPUTS

Audio signals from VCRs, DVD players and similar devices.

VIDEO INPUT

Video signals from VCRs, DVD players and similar devices.

S-VIDEO INPUT (CL29M6W/CL29M9W)

Connect to an S-VHS VCR or DVD player.

HEADPHONE

Connect a set of external headphones to this jack for private listening.

1.4 CHAPTER ONE: YOUR NEW TV

YOUR NEW TV

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player. Because there are two sets of input jacks, you can connect two different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.)

For more information on connecting equipment, see pages 2.1 – 2.8.

AUDIO-VIDEO MONITOR OUTPUTS

These audio-video signals are identical to A/V signals being displayed on the big screen. (Typically used as the input signals for a recording VCR.)

VIDEO INPUT

Video signals from VCRs, DVD players and similar devices.

AUDIO INPUTS

Audio signals from VCRs, DVD players and similar devices.

DVD AUDIO INPUTS (INPUT 2)

Use these jacks to connect the audio signals from a DVD player when using the DVD video input jacks. When not using the DVD jacks, these audio jacks function as audio for Video 2 or SVIDEO.

S-VIDEO INPUT (CL21M6W/CL25M6W/CL29M6W/ CL29M9WCL29V5W/CL29M5W)

Connect to an S-VHS VCR or DVD player.

DVD VIDEO INPUT

Connect video from a DVD player. Note: Monitor Output doesn’t operate in the DVD mode.

∏

VHF/UHF

Connect to an antenna or to a cable TV system.

CHAPTER ONE: YOUR NEW TV 1.5

Remote Control

You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV.

You can also use your remote control to operate your VCR and cable box. See page 4.1 for details.

POWER

Turns the TV on and off.

Number buttons

Press to select channels directly on the TV.

+100

Press to select channels over 100. For example, to select channel 121, press “+100”, then press “2” and “1”.

P.SIZE

Press to change the screen size. Your choices are Normal screen or Zoom screen.

R.SURF

Press the R.SURF button to automatically return to a preferred channel after a user-preset time delay.

SLEEP

Press to select a preset time interval for automatic shutoff.

TURBO

Press to turn the TURBO sound On or Off.

∏

MUTE

Press to temporarily cut off the sound.

”

CH▲ and CH▼ (Channel Up/Down)

Press CH▲ or CH▼ to change channels. (Also used to highlight selections on the on-screen menus.)

’

P.STD

Adjust the TV picture by selecting one of the preset factory settings (or select your personal, customized picture settings).

˝ TV

Press to use your remote control to operate your TV.

VCR

Press to use your remote control to operate your VCR.

CABLE

Press to use your remote control to operate a cable box.

SET

Use this button when you are setting up your remote control to operate your VCR or cable box.

PRE-CH

Tunes to the previous channel.



MTS (Multichannel Television Stereo)

Press to choose stereo, mono or Separate Audio Program (SAP broadcast).

DISPLAY

Press to see the time, channel, etc., on-screen. Also press to exit (quit) the menu system.

VOL -, VOL +

Press to increase or decrease the volume. (Also used to make selections on the on-screen menus.)

Displays the main on-screen menu.

TV/VIDEO

Press to display all of the available video sources (i.e., Antenna/cable, VCR).

YOUR NEW TV

CL21M6W/CL25M6W CL29M6W/CL29M9W

1.6 CHAPTER ONE: YOUR NEW TV

Remote Control

VCR Controls

•

REW (Rewind)

Press to rewind a tape in your VCR.

•

STOP

Press this button to stop a tape during play, record, rewind or fast forward. If the button is pressed during Full-Automatic play, the function will be cancelled.

•

PLAY

Press the PLAY button to play back prerecorded tapes.

•

F.F

Press to fast forward the tape in your VCR.

•

PAUSE

Press to pause your VCR’s tape.

PIP Controls (Not available)

SWAP

Exchanges the video signal that is currently displayed on the main screen with the signal in the PIP window.

TV/VIDEO

Press to select one of the available signal sources for the PIP window.

PIP/SIZE

Press this button to control the PIP window. Press repeatedly to cycle through this sequence: PIP ON with large window, PIP ON with small window, and PIP OFF.

Not available.

YOUR NEW TV

CL21M6W/CL25M6W CL29M6W/CL29M9W

CHAPTER ONE: YOUR NEW TV 1.7

Remote Control

POWER

Turns the TV on and off.

Number buttons

Press to select channels directly on the TV.

+100

Press to select channels over 100. For example, to select channel 121, press “+100,” then press “2” and “1.”

MUTE

Press to temporarily cut off the sound.

CH▲ and CH▼ (Channel Up/Down)

Press CH▲ or CH▼ to change channels. (Also used to highlight selections on the on-screen menus.)

TV/VIDEO

Press to display all of the available video sources (i.e., Antenna/cable, VCR

∏

SURF

Press the SURF button to automatically return to a preferred channel after a user-preset time delay.

”

SLEEP

Press to select a preset time interval for automatic shutoff.

’

MTS (Multichannel Television Stereo)

Press to choose stereo, mono or Separate Audio Program (SAP broadcast).

PRE-CH

Tunes to the previous channel.

DISPLAY

Press to see the time, channel, etc., on-screen. Also press to exit (quit) the menu system.



VOL -, VOL +

Press increase or decrease the volume. (Also used to make selections on the on-screen menus.)

Displays the main on-screen menu.

YOUR NEW TV

CL29V5W/CL25M5W/CL29M5W

2.1 CHAPTER TWO: INSTALLATION

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads” below.

If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads” on page 2.2.

If you have two antennas, see “Separate VHF and UHF Antennas” on page 2.2.

Antennas with 300-ohm Flat Twin Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300-ohm twin flat leads, follow the directions below.

Chapter Two

INSTALLATION

Place the wires from the twin leads under the screws on the 300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws.

Plug the adaptor into the VHF/UHF terminal on the bottom of the back panel.

CHAPTER TWO: INSTALLATION 2.2

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

▼

Plug the incoming cable into the VHF/UHF antenna terminal on back of the TV.

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.

Plug the combiner into the VHF/UHF terminal on the bottom of the rear panel.

INSTALLATION

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).

Connect both antenna leads to the combiner.

Antennas with 75-ohm Round Leads

Plug the antenna lead into the VHF/UHF terminal on the bottom of the back panel.

2.3 CHAPTER TWO: INSTALLATION

INSTALLATION

Connecting to a Cable Box that Descrambles All Channels

▼

Find the cable that is connected to the ANTENNA OUT terminal on your cable box.

This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

▼

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

This terminal might be labeled

“ANT IN”, “VHF IN” or simply, “IN”.

Connect this cable to a two-way splitter.

Connect a coaxial cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box.

CHAPTER TWO: INSTALLATION 2.4

Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B–IN terminal on the A/B switch.

Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV.

INSTALLATION

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet connected to an antenna or a cable system.

After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

Unplug the cable or antenna from the back of the TV.

Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR.

+ 37 hidden pages