Notice
All functionality, features, specifications and other
product information provided in this document inclu
ding, but not limited to, the benefits, design, pricing,
components, performance, availability, and capabiliti
es of the product are subject to change without
-
notice or obligation. Samsung reserves the right to
make changes to this document and the product
described herein, at anytime, without obligation on
Samsung to provide notification of such change.
:
Safety Precautions
1.
Repair Precaution
1-1.
Repair in Shield Box, during detailed tuning. Take specially care of tuning or test, because
―
specipicty of cellular phone is sensitive for surrounding interference(RF noise).
Be careful to useakind of magnetic object or tool, because performance of parts is damaged by
―
the influence of magnetic force.
Surely useastandard screwdriver when you disassemble this product, otherwise screw will be
―
worn away.
Useathicken twisted wire when you measure level.
―
thicken twisted wire has low resistance, therefore error of measurement is few.
A
Repair after separate Test Pack and Set because for short danger(for example an overcurrent
―
and furious flames of parts etc) when you repair board in condition of connecting Test Pack and
tuning on.
Take specially care of soldering, because Land of PCB is small and weak in heat.
―
Surely tune on/off while using AC power plug, becausearepair of battery charger is dangerous
―
when tuning ON/OFF PBA and Connector after disassembling charger.
Don't use as you pleases after change other material than replacement registered on SEC System.
―
Otherwise engineer in charge isn't charged with problem that you don't keep this rules.
1-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Please consult the GSPN website (Samsung Portal) for the most recent version of the product's part list.
CD300
SIM300,SIM301
SOC300
HDC300AXT630124AW1
BTC300KQ03SB1-3R-BEF
IF300KQ20AX-7P-4D
EAR300IJAN4-74
F103LDM152G4505HC012
F100HHM17121A1
104070-0811
5000-6
D1201087-ST32-7H
3
P-1.9SB
5-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Level
6.
Software Download
6-1.
1
Repair
6-1-1.
•
•
•
•
•
•
•
•
•
•
•
1)
Pre-requisite for Download
Download Program(there are2ways to download.)
Flash loader
-
USB Driver
Samsung USB Modem driver
-
GT-C3222 Mobile Device
Data Cable
JIG BOX(GH99-36900A)
RF Test Cable(GH39-00985A)
JIG Cable(GH39-01339A)
Adapter(GH99-38251A)
Binary file
ActiveSync Setting
Driver Installation.
USB Cable:Because of supporting USB
s
7.4.7_
he device manager of your PC may not recognize the cable
that does not support USB
SSG_v0.0_Lite.exe:Flash loader
2.0.
2.0
cable,
7.4.7_
SSG_v0.0_Lite
Battery
2)
Diagram of connection
-
Mobile Phone(with Battery)
AB463651BU
:
Data Cable
PC
6-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Level1Repair
6-1-2.
6-1-3.
Driver Installation
Make sure that you install the driver foraphone.
You have to install the driver of Samsung USB Modem of downloadingaphone image
-
Restart your host PC after you install the phone driver.
-
S/W Download Process
Execute the downloader
1)
Execute the‘Flash loader
7.4.7_
SSG_v0.0_Lite.exe’program
.
Notice:Flash loader supports only Single-CSC.)
(
6-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Set Model
2)
Click"SET MODEL", and you can select appropriate model.
You should choice"C3222W_PUNCH_WIFI_Setting_v00.mdl" for further advance.
Level1Repair
6-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Level1Repair
Select the binary, TFS, and CSC files
3)
Click"Partition Table",and you can selectacertain binary
With browsing files, you can choice appropriate Flash-loader partition table all at once.
.
After that, you should activate TFS, CSC.
Also you can select the TFS files, and CSC files.
Notice:The buttons of TFS and CSC need to be activated not only after phone image
(
is added first)
6-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Level1Repair
Select the download mode
4)
Click"START" to ready to download binary
Notice:In this step, the mobile device actuallydon’tdownload the binary yet.
(
Connect thedevice
5)
First, power off the device with battery
.
.
After that, connect PC with device using USB cable.
Don’tdetach your finger from two keys.
(
)
In that case the device will power on and downloader recognize the device automatically
)
.
6-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Level1Repair
Complete download
6)
The download process is automatically executed.
If"Slot freed for new download" message was shown without any problems, you now do
wnloads the binary successfully.
Notice:After download process is completed, take care of the abnormal power off situ
(
ation(ex. mount/demount battery) within the first booting time. It may causes malfunction
Confirm Download
7)
Reboot the device and confirm whether the device do normal operation.
When completing download, downloader is automatically initialized and ready for
-
connecting next device.
)
6-6
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Level
7.
Disassembly
7-1.
Repair
2
1
Remove screws at7points.
Be careful not to make scratch and molding damage
1)
2
Be careful not to make scratch and molding damage
1)
Separate rear after disassemble hook to
1)
below Order using tool.
Disassemble LCD CONNECTOR
1)
3
Disassemble MIC FPCB
2)
DisassembleaHOOK
3)
Be careful of FPCB damage
1)
4
Be careful of LCD damage when you push
1)
FRONT
7-1
Pushing front right and left side up
1)
Disassemble LCD from Front
2)
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Level2Repair
7.
5
1) Remove screws at 2 points.
1) Be careful of PBA parts damage.
7-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Assembly
7-1.
12
Assemble screws(2 points)
1)
Assemble LCD like the picture.
1)
Level2Repair
7.
Be careful of PBA parts damage.
1)
Screw Torque
2)
1)
3
: 1.1 ~ 1.3
Assemble PBA and Front in regular
sequence
bottom HOOK→right top HOOK
MIC FPCB→LCD CONNECTOR
RECEIVER
Kgㆍcm
→
→
Be careful of being inserted dust
1)
Be careful of LCD damage
2)
4
Assemble REAR with IF SOCKET and
1)
pi SOCKET
3.5
Assemble REAR in regular sequence
2)
right→bottom→left
Be careful of FPCB,WIRE damage
1)
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Be careful not to make scratch and molding damage
1)
7-3
Level2Repair
7.
5
Be careful not to make scratch and molding damage
1)
Screw Torque
2)
Assemble screws(7 points)
1)
: 1.1 ~ 1.3
Kgㆍcm
7-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Level
8.
Block Diagram
8-1.
Repair
3
8-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Level3Repair
8-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Loading...
+ 56 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.