Samsung BW-4302 User Manual
B W CCD CAMERA
INSTRUCTION MANUAL
SAMSUNG CCD CAMERA
BW-4302 SERIES
[
SALES NETWORK
]
·SAMSUNG TECHWIN CO., LTD
OPTICS & DIGITAL IMAGING DIV.
145-3, SANGDAEWON 1-DONG, JUNGWON-GU,
SUNGNAM, KYUNGKI-DO, KOREA
462-121
TEL :82-031-740 - 8137~41
FAX: 82 -031-740-8145
·
www.samsungcamerausa.com
·
www.samsungtechwin.com
·
www.samsungcctv.co.kr
P/NO.:6806-0344-01A
Printed in Korea
crecom 01.11
·SAMSUNG OPTO-ELECTRONICS AMERICA INC.
40 SEAVIEW DIRVE, SECAUCUS N.J
07094, U.S.A.
TEL : 209-902-0347
FAX:201-902-9342
3
B W CCD CAMERA
2
B W CCD CAMERA
Thank you for purchasing a SAMSUNG CCD CAMERA.
Before operating the camera, confirm the camera model and
proper input power voltage. In order that you can understand this
manual thoroughly, we'll introduce our model description.
BW-4302 Series
• EIA models • CCIR models
BW-4302EA BW-4302CA
BW-4302CH
Model Description
BW-4302 x x
• Signal System
E
EIA Model
C CCIR Model
• Power Source
A
AC 24V ~
D
DC 12V
H High Voltage (CCIR Model: AC 230V~ )
power source
signal system
5
B W CCD CAMERA
4
B W CCD CAMERA
WARNING- TO PREVENT RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS CAMERA TO RAIN OR MOISTURE.
INFORMATION-This equipment has been tested and found to
comply with limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will required
to correct the interference at his own expense.
WARNING-Changes or modifications not expressly approved
by the manufacturer could void the user’s authority to operate
the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
Do NOT use other than specified power source.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service
person and should conform to all local codes.
The lightning flash with arrowhead symbol, within
an equilateral triangle is intended to alert the user to
the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK),
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
CAUTION :
FFeeaattuurreess
6
B＆W CCD CAMERA
CCoonntteennttss
PRECAUTIONS ........................................................................ 6
GETTING TO KNOW YOUR CAMERA..................................... 7
Front ....................................................................................... 7
Back ........................................................................................ 8
Accessories ............................................................................ 9
Bottom .................................................................................... 10
CONTROLS AND ADJUSTMENTS........................................... 11
CONNECTION .......................................................................... 14
Installing Auto IRIS Lens ........................................................ 14
Installing C-Mount Lens .......................................................... 16
Installing CS-Mount Lens ........................................................ 17
Connecting To Monitor ........................................................... 18
Connecting To Power ............................................................. 19
TROUBLESHOOTING .............................................................. 20
SPECIFICATIONS .................................................................... 21
Automatic Backlight Compensation
The backlight compensation technology allows
the camera to find the best picture conditions
in any environment and automatically gives a
necessary light level compensation, so that you
can always obtain the clear picture, the finest
detail and perfect light contrast.
Electronic Iris
Electronic iris shutter is automatically
controlled at the speed of
1/60~1/100,000sec (EIA models),
1/50~1/100,000sec (CCIR models).
Video/DC Selection Switch
The camera accepts 2 types of auto lris lenses
(DC type/Video type) and is set with Video/
DC selection switch.
SYNC. System
You can select INT(Internal Synchronization)
mode or L.L(Linelock Synchronization) mode.
High Resolution
The horizontal resolution of 570 TV lines can be
achieved by using a high density CCD
having effective 410,000 pixels, which
provides clean, noiseless and reliable pictures.
7
B W CCD CAMERA
B W CCD CAMERA B W CCD CAMERA
9
8
PPrreeccaauuttiioonnss
Do not install the camera in extreme
temperature conditions.
Do not install or use the camera in an
environment where the humidity is high.
Do not drop the camera or subject
them to physical shocks.
Do not expose the camera to rain or
spill beverage on it.
Do not touch the front glass of the
camera.
Never keep the camera face to strong
light directly.
Severe lighting change or flicker can cause the
camera to work improperly.
It can cause malfunctions to occur.
It can damage the CCD.
It can cause malfunctions to occur.
If it gets wet, wipe it dry immediately.
Liquids can contain minerals that corrode
the electronic components.
There are no user-serviceable parts
inside it.
It is one of the most important parts of camera.
Be careful not to be stained by fingerprint.
•
If the camera is exposed to spotlight or object reflecting the strong light, smear or
blooming may occur.
•
Please check the power whether it satisfies the normal specification before connecting
the camera.
Do use the camera under conditions where
temperatures are within -10°C to 50°C.
Especially be careful for ventilation under
high temperature.
It can cause the image quality to be poor.
Do not install the camera under
unstable lighting conditions.
Do not disassemble the camera.
Never use the camera close to a
gas or oil leak.
Notes:
Loading...